Sie sind auf Seite 1von 4

#------------Cofiguracion para conexion en GWT1_31-03005-----------------

#--------------------------------------------------
echo "Port Configuration"
#--------------------------------------------------
port 1/1/3
no shutdown
description "TEMM|IPBH|Prol. Montejo Norte|GWT1_31-03005|MAN|5||NA|"
ethernet
mode network
mtu 9212
lldp
dest-mac nearest-bridge
admin-status tx-rx
notification
tx-tlvs port-desc sys-name sys-desc sys-cap
tx-mgmt-address system
exit
exit
no autonegotiate
exit
no shutdown
exit
exit
#--------------------------------------------------
echo "Router (Network Side) Configuration"
#--------------------------------------------------
router
interface "GWT1_31-03005"
address 10.210.154.88/31
description "TEMM|IPBH|Prol. Montejo Norte|GWT1_31-03005|MAN|5||NA|"
port 1/1/3
bfd 100 receive 100 multiplier 3
no shutdown
exit
#--------------------------------------------------
echo "ISIS Configuration"
#--------------------------------------------------
isis
level 1
wide-metrics-only
exit
interface "GWT1_31-03005"
level-capability level-1
interface-type point-to-point
bfd-enable ipv4
level 1
metric 1000
exit
no shutdown
exit
no shutdown
exit
#--------------------------------------------------
echo "MPLS Configuration"
#--------------------------------------------------
mpls
interface "GWT1_31-03005"
no shutdown
exit
exit
#--------------------------------------------------
echo "RSVP Configuration"
#--------------------------------------------------
rsvp
interface "GWT1_31-03005"
no shutdown
exit
no shutdown
exit
#--------------------------------------------------
echo "LDP Configuration"
#--------------------------------------------------
ldp
interface-parameters
interface "GWT1_31-03005"
exit
exit
exit
exit all

#---------------------Save Config-----------------------------

admin save
#---------------------Display Config-----------------------------

admin display-config

#----------------------------ROLLBACK----------------------------

#--------------------------------------------------
echo "Port Configuration"
#--------------------------------------------------
port 1/3/7
shutdown
no description "TEMM|IPBH|SANTA_GERTRUDIS|GWT1_31-03083|MAN|5||NA|"
ethernet
no mode network
no mtu 9212
lldp
dest-mac nearest-bridge
no admin-status tx-rx
no notification
no tx-tlvs port-desc sys-name sys-desc sys-cap
no tx-mgmt-address system
exit
exit
exit
#--------------------------------------------------
echo "Router (Network Side) Configuration"
#--------------------------------------------------
router
no interface "GWT1_31-03083"
exit
#--------------------------------------------------
echo "ISIS Configuration"
#--------------------------------------------------
isis
no interface "GWT1_31-03083"
exit
#--------------------------------------------------
echo "MPLS Configuration"
#--------------------------------------------------
mpls
no interface "GWT1_31-03083"
exit
#--------------------------------------------------
echo "RSVP Configuration"
#--------------------------------------------------
rsvp
no interface "GWT1_31-03083"
exit
exit
#--------------------------------------------------
echo "LDP Configuration"
#--------------------------------------------------
ldp
interface-parameters
no interface "GWT1_31-03083"
exit
exit all

#---------------------Save Config-----------------------------

admin save

#---------------------Display Config-----------------------------

admin display-config

Das könnte Ihnen auch gefallen