Beruflich Dokumente
Kultur Dokumente
Features:
Viton disc Integral Lead Free* brass seat Install in horizontal or vertical position (consult factory for proper use in vertical installations) Low pressure drop equivalent to a swing check Silent operation Body Lead Free* brass Spring Guide Stainless Steel Spring Stainless Steel Check Lead Free* brass Disc Viton Adapter Lead Free* brass
Materials
Models
LF601
1 4 1 2
Specifications
A Lead Free* brass silent check valve shall be installed as indicated on the plans. The valve shall have a Viton disc, integral Lead Free* brass seat and silent operation. Pressure rating no less than 400psi (27.6 bar) WOG non-shock. The silent check valve shall be constructed using Lead Free* brass body and Lead Free* brass check and adapter. Lead Free* silent check valves shall comply with state codes and standards, where applicable, requiring reduced lead content. Valve shall be a Watts Series LF601 (threaded) or LF601S (solder)
Application Notes
These valves are not suggested for installation in sewage ejector piping. WARNING: Do not use for reciprocating air compressor service.
*The wetted surface of this product contacted by consumable water contains less than one quarter of one percent (0.25%) of lead by weight.
***This valve is designed to be soft soldered into lines without disassembly using a low temperature solder; 420F (216C). Other solders such as 95/5 tin antimony 460F (238C) or 96/4 tin silver 430F (221C) can be used. However, extreme caution must be used to prevent seat damage. Higher temperature solders will damage the seat material. ANSI B16.18 states that the maximum operating pressure of 50-50 solder connections is 200 psi (13.8 bars) at 100F (38C), and decreases with higher temperatures. Apply heat with the flame directed AWAY from the center of the valve body. Excessive heat can harm the seats.
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Dimensions Weights
Series LF601
A
SIZE (DN) A in. mm in. mm in. DIMENSIONS B mm lbs. kg. WEIGHT
54 54 54 57 86 97
32 32 32 25 38 48
.1 .2 .2 .1 .3 .5
Series LF601S
A
Pressure Temperature
Maximum Working Pressure: 400psi (27.6 bars) WOG non-shock @ 100F (38C)
B
Fahrenheit TEMPERATURE Celsius psi PRESSURE bar
-29 to 38 93 121
"
38
"
12
"
34
"
1"
103 69 62 55 48 41 34 28 20 14
15
Pressure Drop
10 9 8 7 6 5 4 3 2
2.5 3 10 11
4 15
6 23
8 10 30 38
15 57
20 76
30 114
40 152
60 228
Flow (Water)
USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca
ES-LF601 0940
2009 Watts