Beruflich Dokumente
Kultur Dokumente
CEILING SYSTEM
WWW.AIRCREATIVE.COM, INFO@AIRCREATIVE.COM 1
PACKAGE CONTENT CLASSIC LINE 925
1
1. System Classic Line 925
6 3 2. Clip frame
3. Transformer / Power supply
4
4. 2 filters
5. Evaporation fleece
2 4
5 6. 500 ml messenger substance mixture (not included in delivery)
WWW.AIRCREATIVE.COM, INFO@AIRCREATIVE.COM 2
INSTRUCTIONS FOR STANDARD INSTALLATION
CLASSIC LINE 925
WWW.AIRCREATIVE.COM, INFO@AIRCREATIVE.COM 3
STANDARD INSTALLATION
1. Open the device unlatching the two levers. Take the 2. Draw via the provided clip-frame the desired cut-
underpart of the device out of the top piece, by out of the diameter for the device.
unmounting the braces of the underpart.
WWW.AIRCREATIVE.COM, INFO@AIRCREATIVE.COM 4
STANDARD INSTALLATION
3. Set the frame in the cut-out sector and attach it 4. Plug the transformer into the power socket (this
with scotch tape to prevent the sliding away of the should be found in the ceiling).
frame during installation.
5. Plug the power point into the device.
WWW.AIRCREATIVE.COM, INFO@AIRCREATIVE.COM 5
STANDARD INSTALLATION
6. Maneuver the device, by holding it sideways (careful 7. Hang the underpart of the device back into the top
piece.
of power-plug), into the cut-out opening and attach
the device with the provided screws to the ceiling. 8. Fill the device according to instructions in the user’s
guide.
WWW.AIRCREATIVE.COM, INFO@AIRCREATIVE.COM 6
INSTALLATION WITH THREADED RODS
CLASSIC LINE 925
WWW.AIRCREATIVE.COM, INFO@AIRCREATIVE.COM 7
INSTALLATION WITH THREADED RODS
1. Hold the clip-frame with the clips down (please 3. Fill the device according to
mind the tag dots) and affix it with 4 screws (not instructions in the user’s guide.
proviced in the delivery) to the holes underneath.
2. Attach to the ceiling with threaded rods (available
on request) and also to the device.
WWW.AIRCREATIVE.COM, INFO@AIRCREATIVE.COM 8
INSTALLATION UNDER THE CEILING
CLASSIC LINE 925
WWW.AIRCREATIVE.COM, INFO@AIRCREATIVE.COM 9
INSTALLATION UNDER THE CEILING
1. Hold the clip-frame with the clips down (please 3. Fill the device according to
mind the tag dots) and affix it with 4 screws (not instructions in the user’s guide.
proviced in the delivery) to the holes underneath.
2. The unit can now be directly mounted to the ceiling.
WWW.AIRCREATIVE.COM, INFO@AIRCREATIVE.COM 10
FOR QUESTIONS WE ARE AT YOUR DISPOSAL:
www.aircreative.com www.aircreative.com
info@aircreative.com info@aircreative.com
Version 01_2018 11