Beruflich Dokumente
Kultur Dokumente
1. TRX test
2. Packet test
3. Intra cell handovers
4. Inter site handovers
Reporter must know how to used the tool for reporting like mapinfo, TEMS invertigation, snagit
All operators having different SSV report format. Right now CCS doing TP project ( Telenor
SWAP Project )
Reporter must be familiar TP report format. There are following step performed
On first page write city name, Site name and the date which SSV have perform
After some pages table is exist. Which require info about the sites
OMC DATA.
This type of data collects from tems log file. This data also collect form site data sheet
but some time it do not correct. For good reporter you must play the log file and get
BCCH. Cl, LAC, RAC
Cell Name Frequency Band Cell ID BCCH NCC BCC TRX Qty
LHFR261 GSM/DCS 11951 72 3 7 2-3
Click Add button to add log file which do you require whether upload or download.
Note :- For one sector only one log used to make report (uploading or downloading)
Click on properties button to add RLC THROUGHPUT DL for Downloading and RLC
THROUGHPUT UL for Uploading. After report generation you will get mean of uploading
Open tems worksheet click logfile menu and click export, new window will appear, click
add button again new window will appear. See the picture
First option is format select MAPINFO TAB-FILE and click setup. If you do not select the
format option and click setup no info will display relevant for requirement. If you done
properly new will appear like this
Available IEs :- select GSM and in down option Select RXLevel sub(dbm), RXQual and Cell
Id same like on above pictures. Click OK button and this window will vanish. On back
window select option browse log file for loading log file which you want an export.
Select merge option, given destination address and type prefix for Export name and ok
Now tem start to make an export
The export tab file will open in Mapinfo tool. Open it and load site tab file.
In Mapinfo software, there is too much option available in main menu. First click map
option and click create thematic map or just simply press F9 key. After that I will guide
you through pictures : -
In field option, there are three options available RXLevel, RXQual and Cell ID. Why only shows
these option because before you made export select only that three option
Arrange RXLevel values. Method option you must select Custom option otherwise you cannot
edit the values
In styles option you select color combination. For example best RXLevel select hard green color
and for bad RXlevel select red color.
Apply legend in mapinfo. First click on tools option in main menu, click thematic legend
manager and click embed thematic legend; legend will be show on mapinfo window.
In RXQual, same process apply as I explained in RXLevel
In Cell ID option, Also same process as I discuss before but only one difference is that, at apply
thematic you select individual option not in ranges option. See on picture