Beruflich Dokumente
Kultur Dokumente
Router R1
Router 2
Router R3
Ya que configuramos los router como servidores NTP le configuramos una estampa de tiempo
en cada router, como se muestra a continuación.
Router R1
R1(config)#service timestamps log datetime msec
Router R2
R2(config)#service timestamps log datetime msec
Router R3
R3(config)#service timestamps log datetime msec
CONFIGURACION DEL SERVIDORES SYSLOG
Router R1
R3(config)#logging 192.168.1.6
R3(config)#
*mar 01, 00:20:17.2020: SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 192.168.1.6 port
514 started - CLI initiated
R3(config)#exit
R3#
*mar 01, 00:20:20.2020: *mar 01, 00:20:20.2020: %SYS-5-CONFIG_I: Configured from console
by console
R3#show logging
Syslog logging: enabled (0 messages dropped, 0 messages rate-limited,
0 flushes, 0 overruns, xml disabled, filtering disabled)
Una vez realizados estos cambios usted puede ver desde el servidor los mensajes enviados en
el servidor syslog desde la pestaña "Config" y el boton "SYSLOG" como la imagen siguiente:
CONFIGURARION DEL SSH EN EL R3
R3>
R3>enable
R3#configure ter
Enter configuration commands, one per line. End with CNTL/Z.
R3(config)#ip domain-name arios.com
R3(config)#username SSHadmin privilege 3 secret 123
R3(config)#line vty 0 4
R3(config-line)#login local
R3(config-line)#transport input ssh
R3(config-line)#crypto key generate rsa
The name for the keys will be: R3.arios.com
Choose the size of the key modulus in the range of 360 to 2048 for your
General Purpose Keys. Choosing a key modulus greater than 512 may take
a few minutes.