Beruflich Dokumente
Kultur Dokumente
SAT TT448-2 USE USB cable Empty ribbon core Ribbon Roll Sample
Feed Button
FEED Printer Mechanism
Front Cover Ribbon Supply Spindle Release Latch(Right)
Cover Open Buttons
Platen
Inside View Moveable Label Guides
Rear View
External Roll
Power Switch Entry Slot
Ethernet Port
Power Receptacle
Serial Port
USB Port
Opening the Printer Mechanism Loading the Roll
Release and lift the printer mechanism. 1. Put the roll into label supply spindle and then put the roll
Note: The label sensor shall be aimed at the left triangle module into the printer.
below when printing multiple labels.
Loading the Roll(accroding to inner diameter )
Loading the plates
1inch
3
2
4
AC Adapter
Varies by regions
Power Cord
! Note: Please refer to windows driver installation in SAT TT448-2 USE User Maunal.
入
装
向
方
依
3. Pull up the ribbon and stick it to the empty ribbon core. Wind the 4. Fix the mechanism and then close the cover.
core 2~3 circles until the ribbon is pulled tightly.