Beruflich Dokumente
Kultur Dokumente
EQUIPMENT ID NUMBER(S) EQUIPMENT DESCRIPTION EQPT CODE SYSTEM ID. PLANT NO.
LAYOUT DRAWING NUMBER REV. NO. PURCHASE ORDER NUMBER EC / PMCC / MCC NO.
SCHEDULED INSPECTION DATE & TIME ACTUAL INSPECTION DATE & TIME QUANTITY INSP. MH's SPENT TRAVEL TIME
SAUDI ARAMCO USE ONLY
SAUDI ARAMCO TIP NUMBER SAUDI ARAMCO ACTIVITY NUMBER WORK PERMIT REQUIRED?
ITEM
ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A RE-INSP DATE
No.
Sch. "Q"
Equipment storage, handling and preservation procedure was submitted
A1 Attach IV
and approved by S.Aramco .
Sec. 4 & 5
Vessels that were not externally coated at the fabrication shop are
provided with a hard temporary preservative in accordance with MIL
32-SAMSS-004
A2 C16173, Grade I, which can be removed at site prior to surface
Par. 19.3.1 (1)
preparation and application of the Saudi Aramco coating and paint
system.
Vessel is coated with a complete external coating system per the Saudi 32-SAMSS-004
A3
Aramco paints and coating system Par. 19.3.1 (2)
Stainless Steel vessels, which were shipped via ocean freight, are
protected using a temporary protective system compatible with stainless 32-SAMSS-004
A4
steel and suitable outdoor exposure in accordance with MIL C16173 Par. 19.3.1(3)
Grade IV.
Vessels that are partially shop fabricated and/or liable to suffer distortion
have the following protection:
32-SAMSS-004
A5 a) Adequate bracing
Par. 19.1.4
b) All open ends are covered to prevent ingress of dirt and other
foreign matters.
The internal of vessel is completely and thoroughly dried and cleaned 32-SAMSS-004
A6
from all loose scales, weld slags, dirt and debris. Par. 19.1.2
Vessels internally protected by corrosion inhibitor are sealed vapor tight 32-SAMSS-004
A8
using metallic covers. Par. 19.2.3
32-SAMSS-004
A10 Threaded nozzle connections shall be protected with threaded plugs.
Par. 19.3.2
Telltale holes in reinforcing pads shall be protected with wooden plugs or 32-SAMSS-004
A11
packed with a rust preventative grease such as Denso paste. Par. 19.3.2
Vessels waiting for installation have the flanged connections and all
other machined surfaces protected by a coating such as MIL C16173 32-SAMSS-004
A12
Grade IV, which is easily removed in the field and fitted with steel or Par. 19.3.3
wood cover, 3 mm thick and neoprene gaskets.
Page 1 of 2
SAUDI ARAMCO ID/PID - 2/19/05 - REV 0 (Standards Cutoff - August 2004)
SAIC NUMBER DATE APPROVED QR NUMBER
SAUDI ARAMCO INSPECTION CHECKLIST
Vessel Storage, Handling and Preservation SAIC-D-2005 25-May-05 MECH
PROJECT TITLE WBS / BI / JO NUMBER CONTRACTOR / SUBCONTRACTOR
ITEM
ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A RE-INSP DATE
No.
Flanges with permanent blind flanges or covers shall be secured with the 32-SAMSS-004
A13
gaskets and bolting specified for service. Par. 19.3.5
REMARKS:
REFERENCE DOCUMENTS:
1- 32-SAMSS-004 -- Manufacture of Pressure Vessels, 29 May 2002
Page 2 of 2