Beruflich Dokumente
Kultur Dokumente
A WATER SUPPLY
G.I. PIPES AND FITTINGS
1 SOR Providing and fixing G.I. pipes
18.10 complete with G.I. fittings and clamps,
i/c cutting and making good the wall
etc.
(A) SOR
20 mm dia. Nominal bore Metre 131.00 215.90 28282.90
18.10.2
(B) SOR
25 mm dia. Nominal bore Metre 7.00 239.00 1673.00
18.10.3
(C) SOR
32 mm dia. Nominal bore Metre 26.00 300.10 7802.60
18.10.4
(D) SOR
40 mm dia. Nominal bore Metre 187.00 383.30 71677.10
18.10.5
2 SOR Providing & fixing G.I. pipe complete
18.11 with G.I. fittings and clamps i/c making
good the walls etc.concealed pipe
including painting with anti corrosive
bitumatic paint, cutting chases and
making good the wall.
(A) SOR
15 mm dia. Nominal bore Metre 134.00 256.00 34304.00
18.11.1
(B) SOR
20 mm dia. Nominal bore Metre 81.00 288.50 23368.50
18.11.2
3 SOR Providing and fixing G.I. pipes
18.12 complete with G.I. fittings including
trenching and refilling etc.
(A) SOR
32 mm dia. Nominal bore Metre 30.00 246.10 7383.00
18.12.4
4 SOR Making connecting of G.I. distribution
18.13 branch with G.I. Main of following
sizes by providing and fixing tee,
including cutting and threading the
pipe etc. complete.
Page 1
PHE
(A) SOR
20 mm dia. Nominal bore Metre 131.00 11.50 1506.50
18.38.2
(B) SOR
25 mm dia. Nominal bore Metre 7.00 15.30 107.10
18.38.3
(C) SOR
18.38.4 32 mm dia. Nominal bore Metre 26.00 17.90 465.40
(D) SOR
40 mm dia. Nominal bore Metre 187.00 21.40 4001.80
18.38.5
9 SOR Providing and fixing G.I. union in
18.46 G.I.pipe including cutting and
threading the pipe and making long
screws etc.complete
(A) SOR
18.46.2 20 mm dia. Nominal bore each 56.00 155.20 8691.20
(B) SOR
18.46.3 25mm dia. Nominal bore each 4.00 192.60 770.40
(C) SOR
32mm dia. Nominal bore each 4.00 230.00 920.00
18.46.4
Page 2
PHE
SOR
15 mm Nominal bore Each 16.00 588.20 9411.20
18.52.1
13 SOR Providing and fixing C.P. brass angle
18.53 valve for basin mixer and geyser points
of approved quality confirming to
IS;8931
SOR
15 mm Nominal bore Each 56.00 512.90 28722.40
18.53.1
14 SOR Providing and fixing CP brass shower
18.22 rose with 15 or 20 mm inlet
SOR
18.22.2. 150 mm diameter Each. 16.00 94.10 1505.60
Page 3
PHE
Page 4
PHE
SOR
17.35.1 100 mm dia
SOR Sand cast iron S & S pipe as per
17.35.1.1 IS:1729 metre 218.00 916.20 199731.60
SOR
17.35.2 75 mm dia
SOR
17.35.2.1 Sand cast iron S & S pipe as per metre 155.00 756.30 117226.50
IS:1729
Page 5
PHE
SOR
17.38.2 75 mm dia
Page 6
PHE
SOR
17.56.1 100 mm dia
SOR Sand cast iron S & S pipe as per
17.56.1.1 IS:1729 Each 10.00 269.20 2692.00
SOR
17.56.2 75 mm dia
14 SOR
17.60 Provding and fixing sand cast iron trap
of self cleansing design with sand cast
iron screwed down or hinged grating
with or without vent arm complete,
including cost of cutting and making
good the wall and floors.
SOR
17.60.1 100mm inlet and 100 mm outlet
SOR Sand cast iron S & S pipe as per
17.60.1.2 IS:1729 Each 4.00 780.30 3121.20
SOR
17.60.2 100mm inlet and 75 mm outlet
15 SOR
17.65 Painting sand cast iron / centrifugally
cast iron soil,waste,vent pipes and
fittings with paint of any colour such
as chocklate, grey or buff etc over a
coat of primer of approved quality for
new work.
SOR
17.65.1 100mm diameter pipe Each 161.00 38.00 6118.00
SOR
17.65.2 75mm diameter pipe Each 103.00 29.10 2997.30
Page 7
PHE
SOR
12.78.2 110mm diameter
Metre 138.00 238.30 32885.40
2 SOR Providing and fixing on wall face
12.79 unplasticised -PVC moulded fittings/
accessories for unplasticised PVC
rainwater pipes conforming to IS:4985
including jointing with seal ring
conforming to IS:5382 leaving 10mm
gap for thermal expansion.
Page 8
PHE
SOR
12.79.5.2 110mm bend Each 18.00 124.70 2244.60
SOR
12.79.6 Shoe (Plain)
SOR
12.79.6.2 110mm Shoe Each 18.00 108.52 1953.36
3 SOR Providing and fixing unplasticised
12.80 -PVC pipe clips of approved design to
unplasticised-PVC rain water pipes by
means of 50x50x50mm hard wood
plugs, screwed with M.S screws of
required length including cutting brick
work and fixing in cement mortar
1:4( 1 cement: 4 coarse sand) and
making good the wall etc. complete.
SOR
12.80.2 110mm
Each 120.00 157.37 18884.40
4 SOR Providing and fixing to the inlet mouth
12.81 of rain water pipe cast iron grating 15
cm diameter and weighing not less than
440 grams.
Each 18.00 44.90 808.20
C DRAINAGE
Page 9
PHE
(A) SOR
150 mm dia R.C.C. pipe Metr. 276.00 359.30 99166.80
19.6.2
Page 10
PHE
Page 11
PHE
SOR
All kind of soil Cum 118.40 319.60 37840.64
2.8.1
2 SOR Supplying and filling in plinth with
2.28 local sand and under floors including
watering,ramming consolidating and
dressing complete Cum 4.76 238.60 1135.74
3 SOR Providing and laying in position
4.1 concrete of specified grade excluding
the cost of centring and shuttering all
work upto plinth level
SOR 1:2:4(1cement:2 corse sand:4 graded
4.1.3 stone aggregate 20mm nominal size Cum 4.76 4151.40 19760.66
4 SOR Brick work with bricks of class
6.1A designation 100A in foundations and
plinth in
SOR Cement morter 1:6(1 cement : 6 corse
6.1.14A sand) Cum 21.44 4799.20 102894.85
5 SOR 12 mm cement plaster of mix
13.11
Page 12
PHE
Page 13
PHE
E TUBE WELL
150 DIAX100DIAX120 METRE DEPTH TUBEWELL
1 SOR Boring/drilling bore well of required
24.1 dia for casing/strainer pipe, by suitable
method prescribed in IS: 2800 (part I),
including collecting samples from
different strata, preparing and
submitting strata chart/bore log,
including hire & running charges of all
equipments, tools, plants &
machineries required for the job, all
complete as per direction of Engineer
-in-charge, upto 90 metre depth below
ground level.
Page 14
PHE
Page 15
PHE
Page 16
PHE
Page 17
ANALYSIS OF RATE
ANALYSIS OF PUMP(2HP)
total = 36027.00
add 1% water charge 360.27
36387.27
add 15% CP 5458.09
total 41845.36
say 41845.00