Beruflich Dokumente
Kultur Dokumente
Pantalla anterior
Bienvenido: cr462conalvias
Producto: ASPHALT PAVER
Mode lo: AP-555E ASPHALT PAVER A5D
C onfiguración: AP555E, BG555E Asphalt Pave r A5D00001-UP
(MAC HINE) PO W ER ED BY C 4.4 Engine
Pruebas y Ajustes
AP555E and BG555E Asphalt Pavers Machine Systems
Número de medio -KENR9805-01 Fecha de publicación -01/09/2013 Fecha de actualización -24/09/2013
i03877823
Note: The following procedure describes the steps which are used to check and adjust the auger drive chain on the left
side of the machine. The procedure for checking and adjusting the auger drive chain on the right side of the machine is
similar.
Personal injury can result from rotating and moving parts. Stay clear of all
rotating and moving parts.
The machine must be parked on a level surface and the engine stopped.
Attach a "Do Not Operate" or similar warning tag to the start switch and
controls before servicing, repairing, or making adjustments to the
machine.
To prevent injury or death, make sure that the area around the machine is
clear of personnel and obstructions before operating the machine.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/sisweb/sis… 1/5
23/8/2018 AP555E, BG555E Asphalt Paver A5D00001-UP (MACHINE) POWERED BY C4.4 Engine(KEBP0363 - 36) - Documentación
Illustration 1 g02125719
Illustration 2 g02125722
5. Move screed lift switch (4) to the RAISE position. Completely lift the screed.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/sisweb/sis… 2/5
23/8/2018 AP555E, BG555E Asphalt Paver A5D00001-UP (MACHINE) POWERED BY C4.4 Engine(KEBP0363 - 36) - Documentación
Illustration 3 g02125726
7. Move screed lift switch (4) to the FLOAT position. Move the screed lift switch on the right instrument panel to the
FLOAT position.
Note: The screed lift switch on both instrument panels must be in the FLOAT position in order for the screed to
lower.
8. After the screed is resting on the screed lock mechanisms, move screed lift switch (4) to the HOLD position.
Illustration 4 g02125725
9. Move right screed extend switch (7) to the EXTEND position. Release the switch when the right screed extender
is fully extended.
10. Move left screed extend switch (6) to the EXTEND position. Release the switch when the left screed extender is
fully extended.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/sisweb/sis… 3/5
23/8/2018 AP555E, BG555E Asphalt Paver A5D00001-UP (MACHINE) POWERED BY C4.4 Engine(KEBP0363 - 36) - Documentación
Illustration 5 g02125730
11. Move throttle control switch (8) to the LOW IDLE position. Hold the switch in this position for less than 1
second.
12. After the engine reaches low idle, move engine start switch (9) to the OFF position.
Illustration 6 g02125734
13. Rotate auger (10) back and forth with your hand.
14. Measure distance (X) that the auger moves along the outside edge of auger (10). The measurement should be 6.4
to 13 mm (0.25 to 0.5 in). If the measurement is outside the specified range, adjust the auger drive chain tension
with the following procedure.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/sisweb/sis… 4/5
23/8/2018 AP555E, BG555E Asphalt Paver A5D00001-UP (MACHINE) POWERED BY C4.4 Engine(KEBP0363 - 36) - Documentación
Illustration 7 g02125737
Illustration 8 g02125740
17. Hold lands of threaded rod (12). Turn adjusting nut (13) until the auger rotation is within the specified range.
C opyright 1993 - 2018 C ate rpillar Inc. Thu Aug 23 2018 21:23:19 GMT-0500 (hora e stándar de C olom bia)
Todos los de re chos re se rvados.
R e d privada para lice nciados de l SIS. cr462conalvias
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/sisweb/sis… 5/5