Beruflich Dokumente
Kultur Dokumente
5CTD 5CTM
Local and remote communication PRIME open standards. This implementation is proven with
capabilities enable complete meter more than one and a half million ZIV PRIME devices
operation. This includes data reading, installed worldwide. It ensures a high power transmission
configuration setting changes, date without distortion optimized also for low impedance lines,
synchronization and operation of the built without affecting line impedance. High receiver sensitivity
Starting current 20 mA 40 mA
Key Features
- Instantaneous measurement of voltage,
current and power factor per phase, as well Maximum current 80 A 80 A
as instantaneous network frequency.
- Load profile recording. 6 energy values
Power absorbed < 0.3 VA < 0.1 VA
(imported and exported active energy and by the current
reactive in the 4 quadrants) either total or circuit (Iref)
by the corresponding tariff.
Voltage rated 127 – 230 V 3 x 127 – 230 V /
- Versatile Time of Use (TOU) module, values 220 – 400 V
providing up to three complete and
(*) (*)
independent contracts, each with an Consumption < 10 VA
(*)
< 10 VA
(*)
independent tariff configuration, 6 tariff IEC 62053-61 IEC 62053-61
- Maximum Demand Recording (MDR) for Power free 280 VAC / 0.5 AacMax 280 VAC / 0.5 AacMax
each of the programmed tariffs. output
(depending on
- Time synchronization. the model)
- Event recording. Event and alarm recording Built-in breaker 80 A / 250 VAC 80 A / 250 VAC
nominal values
with a broad set of manageable events.
- Power Quality recording. Voltage variations Built-in breaker 10
6
10
6