Beruflich Dokumente
Kultur Dokumente
[Caution]
In this manual, switch or status ‘1’ is described ‘ON’ and ‘0’ is ‘OFF.’
■ GENERAL CONFIGURATIONS
12 sequential control blocks (groups) are available per controller module. Each block can contain 89 commands at the maxi-
mum. Each block is divided into 20 steps (00 to 19), and can be connected with BRANCH command to realize a series of
sequence commands. A specific step in one block can be launched by a command from another block.
G81 STEP 00
STEP 00 Relay Sequence
STEP 01
G82
STEP 02
Step Sequence
G92 STEP 19
END