Beruflich Dokumente
Kultur Dokumente
▣Specifications
Control output NPN open collector output ☞ Load voltage : 30VDC, Load current : Max. 100mA,
Residual voltage : Max. 1V
Protection circuit Reverse polarity protection, Short-circuit protection
Indication Operation indicator : Red LED
Connection Outgoing cable(2m)
Insulation resistance Min. 20MΩ(at 500VDC)
Noise strength ±240V the square wave noise(pulse width:1㎲) by the noise simulator
Dielectric strength 1000VAC 50/60Hz for 1minute
Vibration 1.5mm amplitude at frequency of 10 ~ 55Hz in each of X, Y, Z directions for 2 hours
Shock 500m/s²(50G) in X, Y, Z directions for 3 times
Ambient illumination Sunlight : Max. 11,000 , Incandescent lamp : Max. 3,000
Ambient temperature -10 ~ +60℃(at non-freezing status), Storage : -25 ~ +70℃
Ambient humidity 35 ~ 85%RH, Storage : 35 ~ 85%RH
Protection IP50(IEC specification)
Material Case : ABS, Lens : Acryl
Cable 4P, ø4mm, Length : 2m
Accessories Mounting bracket, Bolts/nuts
Weight Approx. 150g
J-11
DC Miniature Through Beam Type
▣Characteristic
(A)
lBY500-TDT lBYS500-TDT Counter
Characteristic Angle characteristic
Measuring method Data Measuring method Data
(B)
Timer
50 50
Receivr
Receiver
40 40 (C)
Temp.
30 30 controlle
L θ
L
20 20
(D)
0 0 Power
Emitter 80 40 0 40 80
。
40 。
20 0 。
20 。
40 controlle
E mitter
Left ← Center →Right
Left ← Center →Right
Operat ion angle θ
Operation position (mm)
(E)
Panel
meter
▣Connections
Standard type(Dark ON) Side detection type(Dark ON) (K)
Pressur
sensor
lBY500-TDT1 lBY500-TDT2 lBYS500-TDT1 lBYS500-TDT2
Detecting
Emitter Receiver
Emitter Detecting Receiver target
target (L)
Rotary
encoder
(M)
(White) Synchronous wire(SYNC.) (White) 5-Phase
stepping
(Brown) +V (Brown) motor &
Driver &
(White)Synchronous wire(SYNC.) (White)
Controlle
Load (Black) (Brown) +V (Brown)
(Blue) 0V (Blue) Load (Black)
12-24VDC (Blue) 0V (Blue)
12-24VDC
※The power of the emitter and the receiver must be supplied from same power line.
※Synchronous wire(White) of the receiver must be connected with that of the emitter.
※Unused wires must be insulated.
J-12
BY Series
▣Dimensions Unit:mm
lProduct(BY500-TDT) lProduct(BYS500-TDT)
1 15
30 Cable:ø4 2m
ø 3.2
Optical axis
12 Optical axis Operation indicator
Cable:ø4 2m
ø3.2
ø3.6
Optical axis
2.5 24
1.5 26.5 Operation indicator
12 Optical axis
M3 BOLT M3 BOLT
M3 BOLT
10 3.5
4 24 13.5
ø 3.6
32
17
8.5
ø3.2
4 24
28
J-13