Beruflich Dokumente
Kultur Dokumente
Reg. 92/03145/07
SCHEDULE OF RATES
LABORATORY
122A INTERSITE AVENUE
UMGENI BUSINESS PARK
DURBAN
4001
Dear Client
We would like to thank you for allowing Geosure(Pty)Ltd to tender rates for laboratory testing and
would like to take this opportunity of thanking you for your continued support and trust that we will
be able to continue to focus on customer service to ensure that our partnership is a successful one.
Our Schedule of Rates applicable to April 2012 to March 2013 has been revised and attached hereto
for your perusal.
Laboratory Manager
Kris Veeran
Directors
D. Naidoo Pr.Sci.Nat. BSc (Hons) MSABTACO, MSAIEG
V. Govender ND (Civ. Eng.) MSABTACO MSAT
Associate: S Pather Pr.Sci.Nat. BSc (Hons)
COMPANY ADDRESS AND TELEPHONE NUMBERS
Head Office
Telephone : +27 (0) 861 GEOSURE /+27 (0) 861 436 7873
E-mail : geosure@iafrica.com
Materials Laboratory
E-mail : lab@geosure.co.za
Please note that our Head Office and Laboratory will be relocating to a single new premises,
as of 1 May 2012 for the Head Office and 1 June 2012 for the Laboratory. Our contact details
except for fax numbers remain the same:
New Address: 122 Intersite Avenue, Umgeni Business Park, Durban, 4091, KwaZulu Natal,
South Africa
Scale of fees
3.2 TMH1 A1, A2, A3, A4, A5 Sieve Analysis to 0.075 + Atterberg Test 430.00
COMPACTION
4.1 TMH1 A7 Maximum dry density & optimum moisture Test 380.00
content: (Mod AASHTO OR Proctor)
Natural Material
4.2 TMH1 A7 Maximum dry density & optimum moisture Test 420.00
content: ( Mod AASHTO OR Proctor)
Stabilised Material
5.2 SABS 829 Sieve Analysis on fine aggregates with Test 230.00
Fineness Modulus (4.75mm minus)
5.4 TMH1 B9 Loose Bulk Density (LBD) – on fine aggregates Test 150.00
5.10 TMH 1 B2 / SABS 841 Aggregate crushing value (Dry ) Test 385.00
5.11 TMH 1 B2 / SABS 841 Aggregate crushing value (Wet ) Test 420.00
5.12 TMH 1 B2 / SABS 841 10 % Fines aggregate crushing value (Dry) Test 845.00
5.13 TMH 1 B2 / SABS 841 10 % Fines aggregate crushing value (Wet) Test 955.00
6.2 SABS 862 Slump Test only (excluding time & travel) Test 115.00
6.3 SABS 861 & SABS 862 Manufacture of six cubes, test for slump. Test 570.00
(excluding time & travel)
Scale of fees
DRILLING OF CORES
11.1 BS 1377 Part5 Standard Consolidation Test with loading Per 2,638.00
increments up to 1600 kN and 3 unloading Sample
increments. Time settlement curves for all
loading stages.
11.2 BS 1377 Part5 Swell Potential (Pressure) Test with specific Per 823.00
gravity (measure of maximum pressure to Sample
prevent swell)
Per
11.4 Brackley Brackley Swell Test Sample 883.00
Per
11.6 Prof. Knight Collapse Potential Test Sample 762.00
12.3 BS 1377 Part8 Consolidated Drained Triaxial Compression Test Per 5, 445.00
(C.D.) 0-8 Hour Duration – Undisturbed sample
12.5 As for 12.3 above but Recompacted and testing Per 4,840.00
for 0-8 hours excluding Mod AASHTO sample
12.9 As for 12.7 above but Recompacted and Testing Per 4,840.00
for 0-8 hours excluding Mod AASHTO sample
12.11 Extra Over for 12.1 to 12.7 for each Additional Per 545.00
Cell Pressure sample
13.1 BS 1377 Part7 Unconsolidated Undrained Rapid Shear Test Per 1,452.00
(U.U) sample
13.2 BS 1377 Part7 Consolidated Drained Shear Test 0-8 hours Per 1,634.00
sample
13.7 BS 1377 Part7 Consolidated Drained Reversal Test for Per 1,997.00
Residual Strength sample