Conduct site inspection and ensure all electrical installation must comply with the design
specifications, as per drawings and as per applicable standard.
• Coordinate and prepare various documents such as test, inspection reports, excavation permits, safety approval prior to implementation of work. • To assist and coordinate with the sub-contractor, Supervisor staff to plan co-ordination and control work activities in accordance with approved drawing work method / inspection & specification requirement etc., • Verification of Inspection Readiness before issuing RFI • Keeping the files/Inspection Records always updated • Highlighting all discrepancies/anomaly detected during monitoring inspection and informing the same to QC Manager. • Initiate NCR as required in consultation with QC – Manager. • Follow up of corrective and preventive action for NCR’s/CAR’s issued and verification of effectiveness of the same. • Taking immediate remedial to clear inspection log book comments • Submitting daily report to QC-Manager at the end of each day of work. • Sole responsible for all Quality Control Activities for the allotted area of discipline. • Verification of materials supplied with that of material submittal • Verification of proper functioning & utilization of measuring instruments. • Supervise the work under as per specifications and standards. • Study and analyze the design / sketch plan which include the materials breakdown given by the client for execution of the project. • Review Design and development of one line diagram, preparation of electrical equipment specifications, identifying hazardous areas, • Supervise group of engineer and draftsmen for the underground tunnel construction project. • Review and updates engineering estimating data, costing parameter and drafting standard. • Assist in the preparation of work plans, schedules, budgets, manning requirements and progress reporting. • Prepare cost and material estimates. • Review and comments on engineering drawings, documents and reports. • Conduct field investigation and dimensional checking. • Operation and maintenance of grid station, Transformers, protection relays, timers, Switch Gears, Panel Boards, Circuit Breakers, HT & LT transmission lines and electrical equipment, Electrical motors A/C & D/C, Industrial trouble shooting & wiring • Cable High Potential Test / Insulation Resistance Check/ Continuity Check • Loop Checking, Commissioning & Trouble Shooting • Maintenance works in turbines, electrical motors and accessories. • Modification of the Panel Internal Wiring Connections as per site requirements. • Trouble shooting and maintenance of electrical connections, accessories and installations / equipments. • Internal wiring of Panels. • Participated in the Energy Activities of Sub-stations. • Charging & Discharging Test; Cable Termination.