Beruflich Dokumente
Kultur Dokumente
Pipe Geometry
262.9
INPUT DATA
Design Condition
Allowable External Collapse Pressure (Mpa) 0.048 Applied Axial Compressive Loa
0.45
0.40
Fe=1.5
0.35
Fe=3
0.30
Pressure (MPa) External
Graph
0.25 Pressure
0.20
0.15
0.10
0.05
0.00
Pressure (MPa) External
Graph
0.25 Pressure
0.20
0.15
0.10
0.05
0.00
0 50 100 150 200 250 300 350
D/tr
width of the saddle support (mm) 250 width of the saddle support (mm
1. This data calculation sheet is protected by intellectual property law including copyright. You as a user are not al
2. The formula and methods which are used in this calculation sheet are based on those mentioned in the technical
3. The owners of CALCSTRESS.COM cannot guarantee the completeness and accuracy of any information includ
for a professional service. So, it must not be used for any professional services. CALCSTRESS IS NOT RESPO
ethod of Calculation
Axial Compressive Stress (Mpa)
ength of Unsupported Pipe (m) 4.000
pplied Axial Compressive Load (N) 30000 Applied Axial Compressive Load (KN)
2-Longitudinal Compressive Load vs Pipe Span (Size) 3-Euler Buckling Stress vs Pipe Span (Tempera
Fa VS L
Fa VS D
Load (KN)
Euler Str
Load (KN)
Euler Str
L, m (D, mm)
Local axial stress due to saddle supporting Local shear stress due to saddle supporting
idth of the saddle support (mm) 250 width of the saddle support (mm)
6-Local Hoop (Axial) Stress vs Pipe Span 7-Local Shear Stress vs Saddle Angle
ght. You as a user are not allowed to copy, republish and distribute this calculation sheet without permission.
mentioned in the technical papers on the WWW.CALCSTRESS.COM website. User must be aware of the applied method's re
cy of any information including formula and methods applied and used in this datasheet. Moreover some sheets and cells are u
CSTRESS IS NOT RESPONSIBLE FOR ANY DAMAGES, OMISSIONS AND ERRORS ARISING FROM USING THIS
St vs L 200.00
St vs T 180.00 allowable Shell
Buckling stress
160.00
Axial Compressive
140.00
Stress
120.00
60.00
40.00
60.00
40.00
0.00
50 100 150 200 250 300 350
L,m (T, C)
Applied stress
Allowable Stress
Column U
Allowable Stress
D/tr
pass Result
40.00
30.00
20.00
10.00
Pipe Span (m
Loacal Shear Stress (MPa) 0.00
0.00 1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00
20.00
10.00
Pipe Span (m
Loacal Shear Stress (MPa) 0.00
0.00 1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00
et. Moreover some sheets and cells are unlocked and the formula can change easily. It has been designed for training only. It
RORS ARISING FROM USING THIS CALCULATION SHEET. This sheet content may change without any prior notice
015
ISO 14692-3
Design Factors
hl(2,1))(Mpa) 124
l(0,1))(Mpa) 45
h ratio (r) 0.720
14692 (f2) 0.830
692-3 (f3) 0.900
1.000
1.000
1.000
66.23 pass
22.86 pass
172.45 pass
allowable Shell
Buckling stress
Axial Compressive
Stress
)
Stress
Deflection
5.00
925
6.07
12.50
pass
m)
It has been designed for training only. It may not be complete enough
tent may change without any prior notice.