Beruflich Dokumente
Kultur Dokumente
Benefits
No cartridge use
Filtration level 10µ - 3,0 mm
Self-cleaning by back washing
No interruption of production process
Continuous cleaning of the filter surface ensures minimum pressure drop
Easy to dismount and inspect
Low operating costs
Solidly built filter housing
Limited maintenance, uncomplicated, rugged, reliable design
For more information we invite you to contact us
Automatic self cleaning Back Wash Filters
ABW...
DN25 – DN150 (ANSI 1” – 6”)
PN10 – PN64
Range of Applications
The CbS lt Automatic Back Wash Filter is a versatile,
self cleaning filter for fluid media with a minimum of
maintenance.
The robust Automatic Back Wash Filter with its motor-
driven cleaning device suitable for the separation of
suspensions as well as the continuous separation of
solid particles from liquids whose viscosity's may range
from water-thin to pasty.
It thus offers a wide range of application possibilities
throughout the entire processing industry
Function
The liquid flows through the filter element and leaves
the filter housing through the outlet connection.
Between inlet and outlet a seal is placed, limiting any
cross contamination between dirt part and clean part.
Dirt and particles are retained on the outside of the
screen and are continuously removed from the filter
element with a flexible suction bar. ABWF200-SS304-25um
The dirt is directed to the sludge purge connection. for sunflower oil filtration
This collection back flow may be either manually
or automatically through a valve.
An Automatic Back Wash system can be set up
including an actuator and a time controller or pressure
differential initiated valves.
The installation of a manual by pass function is
advised.
Clogging of the filter is almost impossible, because of
the special wire mesh construction of the filter element.
The Automatic Back Wash filter is available either skid
mounted, can be supplied for wall or machine
attachment or as a stand-alone unit.
Electro polished
Installation
The ABW Filter can be mounted in horizontal or
vertical position. Standard DIN or Ansi Flanges are
used to install the filter in piping systems and pipes are
not subject to any additional load or mechanical
tension.
The medium must flow through the filter in the direction
indicated on the housing. If the filter is installed
incorrectly, it will not operate properly.
The contaminant back washing (purge) line should be
positioned in such a way as to avoid any pressure or
reduction in its diameter.
It should not be positioned in a upwards slope, and
should whenever possible be positioned on a
downwards incline.
Applications
Chemical Industry
Ammonia, solvents, softening agents, glycol's, adhesives,
chemical base materials, suspensions, lye's, waste
liquids, etc. washing liquids, distillation and reaction
fluids, surfactants.
For preliminary and coarse filtering upstream of
distillation columns, reactors, flue gas scrubbers, pumps,
fine filters, filling plants, etc.
Beverage Industry
Wineries (must filtration), breweries, distilleries, etc
Plastic industry
Base products, PVC and PU pastes, rubber products,
silicones, etc.
BWF150-CS-50 um
Food industry for cooling water filtration
Sweets, dairy products, flavors, concentrates, treacle's,
fatty acids, cooking oils, molasses, fruit concentrates and
juices.
Benefits
No cartridge use
Filtration level 10µ - 3,0 mm
Self-cleaning by back washing
No interruption of production process ABWF100-CS-25um for
Continuous cleaning of the filter surface ensures NMP solvent filtration
minimum pressure drop
Easy to dismount and inspect
Low operating costs
Solidly built filter housing
Limited maintenance, uncomplicated, rugged, reliable
design
Standard Model Special Version and Optional
Features
Filter insert ……………. 10 – 3000 um