Beruflich Dokumente
Kultur Dokumente
190607>
NVSW319BT
● Pb-free Reflow Soldering Application
● Built-in ESD Protection Device
● RoHS Compliant
NICHIA STS-DA1-5472A <Cat.No.190607>
SPECIFICATIONS
1
NICHIA STS-DA1-5472A <Cat.No.190607>
RANKS
Color Ranks(IF=1050mA)
The color ranks have chromaticity ranges within 3-step MacAdam ellipse.
Rank Rank Rank Rank Rank Rank
sm273 sm303 sm403 sm503 sm573 sm653
Color Temperature
TCP 2700 3000 4000 5000 5700 6500
(Unit: K)
x 0.4578 0.4338 0.3818 0.3447 0.3287 0.3123
Center Point
y 0.4101 0.4030 0.3797 0.3553 0.3417 0.3282
Minor Axis a 0.004056 0.004107 0.004071 0.003555 0.003087 0.002709
Major Axis b 0.007872 0.008391 0.009282 0.008418 0.007809 0.006561
Ellipse Rotation Angle Φ -36.05 -36.00 -35.95 -31.78 -31.56 -32.35
The color ranks have chromaticity ranges within 5-step MacAdam ellipse.
Rank Rank Rank Rank Rank Rank
sm2750a sm2750b sm2750c sm2750d sm2750e sm2750f
Color Temperature
TCP 2700
(Unit: K)
x 0.4578
Center Point
y 0.4101
Minor Axis a 0.006760
Major Axis b 0.013120
Ellipse Rotation Angle Φ -36.05
2
NICHIA STS-DA1-5472A <Cat.No.190607>
The color ranks have chromaticity ranges within 7-step MacAdam ellipse.
Rank Rank Rank Rank Rank Rank
sm5770a sm5770b sm5770c sm5770d sm5770e sm5770f
Color Temperature
TCP 5700
(Unit: K)
x 0.3287
Center Point
y 0.3417
Minor Axis a 0.007203
Major Axis b 0.018221
Ellipse Rotation Angle Φ -31.56
3
NICHIA STS-DA1-5472A <Cat.No.190607>
60°
sm273,sm2750a,sm2750b,sm2750c,sm2750d,sm2750e,sm2750f,
R70
sm303,sm3050a,sm3050b,sm3050c,sm3050d,sm3050e,sm3050f
sm403,sm4050a,sm4050b,sm4050c,sm4050d,sm4050e,sm4050f,
R70
sm503,sm5050a,sm5050b,sm5050c,sm5050d,sm5050e,sm5050f
sm573,sm5750a,sm5750b,sm5750c,sm5750d,sm5750e,sm5750f,
sm5770a,sm5770b,sm5770c,sm5770d,sm5770e,sm5770f,
Rnn
sm653,sm6550a,sm6550b,sm6550c,sm6550d,sm6550e,sm6550f,
sm6570a,sm6570b,sm6570c,sm6570d,sm6570e,sm6570f
4
NICHIA STS-DA1-5472A <Cat.No.190607>
CHROMATICITY DIAGRAM
0.46
3000K
4000K
2700K
0.44
sm303 sm2750b
sm3050c
sm2750c
sm2750a
0.42
sm3050b
sm3050a sm2750d
0.40
sm4050b sm4050c
sm273
sm3050d
y
sm3050f
sm4050a sm2750e
0.38 sm3050e
sm4050d sm2750f
sm403
0.36 sm4050e
sm4050f
0.34
黒体放射軌跡
Blackbody Locus
0.32
0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48
x
5
NICHIA STS-DA1-5472A <Cat.No.190607>
CHROMATICITY DIAGRAM
0.40
5000K
0.38
sm503
sm5050c
sm5050d
sm5050b
y
0.36
sm5050a
sm5050e
0.34
黒体放射軌跡 sm5050f
Blackbody Locus
0.32
0.30 0.32 0.34 0.36 0.38
x
6
NICHIA STS-DA1-5472A <Cat.No.190607>
CHROMATICITY DIAGRAM
0.38
5700K
sm5750c
0.36 sm5770c
sm5750b
sm5770b
sm5750d
sm5750a sm5770d
0.34
sm5770a sm573
sm5750e
y
sm5770e
0.32 sm5770f
sm5750f
0.30
黒体放射軌跡
Blackbody Locus
0.28
0.28 0.30 0.32 0.34 0.36 0.38
x
7
NICHIA STS-DA1-5472A <Cat.No.190607>
CHROMATICITY DIAGRAM
0.36
6500K
sm6550c
sm6570c
sm6550b
0.34
sm6570b
sm6550d
sm6550a sm6570d
sm6570a
sm653
0.32
sm6550e
sm6570f sm6570e
y
sm6550f
0.30
0.28
黒体放射軌跡
Blackbody Locus
0.26
0.26 0.28 0.30 0.32 0.34 0.36
x
8
NICHIA STS-DA1-5472A <Cat.No.190607>
OUTLINE DIMENSIONS
* 本製品はRoHS指令に適合しております。 NVSW319B
This product complies with RoHS Directive. 管理番号 No. STS-DA7-14824
(単位 Unit:±0.2)
(単位 Unit: mm, 公差 Tolerance: mm)
光学的中心位置
Location of the optical center
3.5
0.4
3.1
Cathode Mark
0.77
3.5
2.35
項目 Item 内容 Description
パッケージ材質 セラミックス
Package Materials Ceramics
3.2 シリコーン樹脂
蛍光体層材質
(拡散剤+蛍光体入り)
1.3 0.5 0.45 Phosphor sheet
Silicone Resin
Materials
(with diffuser and phosphor)
封止樹脂材質
シリコーン樹脂(拡散剤入り)
Encapsulating Resin
Silicone Resin(with diffuser)
Materials
レンズ材質 シリコーン樹脂
2.4
3.2
K A
保護素子
Protection Device
ダイヒートシンク
Die Heat Sink
9
NICHIA STS-DA1-5472A <Cat.No.190607>
SOLDERING
120sec Max
3.3
* This LED is designed to be reflow soldered to a PCB. If dip soldered or hand soldered, Nichia will not guarantee its reliability.
* Reflow soldering must not be performed more than twice.
* When cooling the LEDs from the peak temperature a gradual cooling slope is recommended; do not cool the LEDs rapidly.
* During reflow soldering, the heat and atmosphere in the reflow oven may cause the optical characteristics to degrade. In particular,
reflow soldering performed with an air atmosphere may have a greater negative effect on the optical characteristics than if a
nitrogen atmosphere is used; Nichia recommends using a nitrogen reflow atmosphere.
* This LED uses a silicone resin for the lens and internal pre-coating resin; the silicone resin is soft. If pressure is applied to the lens,
it may cause the lens to be damaged, chipped, and/or delaminated. If the resin is damaged, chipped, delaminated and/or
deformed, it may cause the internal connection to fail causing a catastrophic failure (i.e. the LED not to illuminate) and/or
reliability issues (e.g. the LED to corrode and/or to become dimmer, the color/directivity to change, etc.). Ensure that pressure
is not applied to the lens.
If an automatic pick and place machine is used for the LEDs, use a pick up nozzle that does not affect the lens.
Recommended conditions:
Using a nozzle specifically designed for the LEDs is recommended (See the nozzle drawing below).
* Ensure that the nozzle does not come in contact with the lens when it picks up an LED.
If this occurs, it may cause internal disconnection causing the LED not to illuminate.
0.5
1.9
0.4
0.15
Φ3.5
A A部拡大
4.5 (単位 Unit: mm)
Expansion of A
10
NICHIA STS-DA1-5472A <Cat.No.190607>
* Once the LEDs have been soldered to a PCB, it should not be repaired/reworked. If it must be done, using a hot plate is strongly
recommended. Sufficient verification should be performed prior to use to ensure that the repair/rework does not cause the LED
characteristics to deteriorate.
* The Die Heat Sink should be soldered to customer PCB. If it is difficult or impossible, use high heat-dissipating adhesive.
* When soldering, do not apply stress to the LED while the LED is hot.
* The soldering pad pattern above is a general recommendation for LEDs to be mounted without issues; if a high degree of precision
is required for the chosen application (i.e. high-density mounting), ensure that the soldering pad pattern is optimized.
* When flux is used, it should be a halogen free flux. Ensure that the manufacturing process is not designed in a manner where the
flux will come in contact with the LEDs.
* Ensure that there are no issues with the type and amount of solder that is being used.
* This LED has all the electrodes on the backside; solder connections will not be able to be seen nor confirmed by a normal visual
inspection. Ensure that sufficient verification is performed on the soldering conditions prior to use to ensure that there are no
issues.
11
NICHIA STS-DA1-5472A <Cat.No.190607>
Nxxx319x
テーピング部 Tape
管理番号 No. STS-DA7-14825
1.75±0.1
Φ1.5+0.1
-0 8±0.1 2±0.05 4±0.1 0.35±0.05 (単位 Unit: mm)
3.7±0.1
5.5±0.05
Cathode Mark
12+0.3
-0.1
Φ1.5+0.2 2.55±0.1
-0
(0.08 クロスバー凹部)
(0.08 Crossbar Recess)
3.7±0.1 エンボスキャリアテープ
Embossed Carrier Tape
引き出し方向
Feed
Direction
リーダ部最小400mm
Leader without Top Cover Tape 400mm MIN
リール部 Reel
330±2
* 実装作業の中断などでエンボスキャリアテープをリールに巻き取る場合、
0
13 ±
Φ エンボスキャリアテープを強く(10N以上)締めないで下さい。
21 ±
Φ
0.
8
LEDがカバーテープに貼り付く可能性があります。
Φ100±1
ラベル
Label
12
NICHIA STS-DA1-5472A <Cat.No.190607>
Label ラベル
Reel
Desiccants
シリカゲル
リール
XXXX LED
PART NO.: Nxxxxxxx
*******
LOT: YMxxxx-RRR
QTY.: PCS
RoHS
Seal NICHIA CORPORATION 491 OKA, KAMINAKA, ANAN, TOKUSHIMA, JAPAN
熱シール
Moisture-proof Bag
アルミ防湿袋
Label ラベル
XXXX LED
PART NO.: Nxxxxxxx
*******
RANK: RRR
QTY.: PCS
RoHS
NICHIA CORPORATION
491 OKA, KAMINAKA, ANAN, TOKUSHIMA, JAPAN
13
NICHIA STS-DA1-5472A <Cat.No.190607>
M - Month
Month M Month M
1 1 7 7
2 2 8 8
3 3 9 9
4 4 10 A
5 5 11 B
6 6 12 C
14
NICHIA STS-DA1-5472A <Cat.No.190607>
DERATING CHARACTERISTICS
NVSW319x
管理番号 No. STS-DA7-10251A
周囲温度-許容順電流特性 はんだ接合部温度(カソード側)-許容順電流特性
Ambient Temperature vs RθJA =10°C/W Solder Temperature(Cathode Side) vs
Allowable Forward Current RθJA =15°C/W Allowable Forward Current
Derating1 RθJA =20°C/W Derating2
5000 5000
Allowable Forward Current(mA)
3000 3000
許容順電流
許容順電流
(23, 2000) (55, 2000) (86, 2000) (100, 2000)
2000 2000
(100, 1580)
1000 1000
(100, 1050)
(100, 790)
0 0
0 20 40 60 80 100 120 0 20 40 60 80 100 120
周囲温度 はんだ接合部温度(カソード側)
Ambient Temperature(°C) Solder Temperature(Cathode Side)(°C)
デューティー比-許容順電流特性
Duty Ratio vs
Allowable Forward Current
Duty TA =25°C
3000
Allowable Forward Current(mA)
2500
2400
2000
許容順電流
1500
1000
500
0
0 20 40 60 80 100
デューティー比
Duty Ratio(%)
15
NICHIA STS-DA1-5472A <Cat.No.190607>
OPTICAL CHARACTERISTICS
* 本特性は参考です。 NVSW319B
All characteristics shown are for reference only and are not guaranteed. 管理番号 No. STS-DA7-14827
* パルス駆動により測定しています。
The following graphs show the characteristics measured in pulse mode.
発光スペクトル
Spectrum Tcp =4000K
TJ =25°C
Spectrum IFP = 1050mA
1.0
(Normalized to peak spectral intensity)
Relative Emission Intensity(a.u.)
0.8
相対発光強度(最大強度で正規化)
0.6
0.4
0.2
0.0
350 400 450 500 550 600 650 700 750 800
波長
Wavelength(nm)
Directivity1
指向特性
Directivity
TJ =25°C
0°
-10° 10° IFP = 1050mA
-20° 20°
-30° 30°
-40° 40°
-50°
50°
Radiation Angle
放射角度
-60° 60°
-70° 70°
-80° 80°
-90° 90°
1 0.5 0 0.5 1
相対照度
Relative Illuminance(a.u.)
* 本特性は演色性ランクR70に対応しています。
The graphs above show the characteristics for R70 LEDs of this product.
16
NICHIA STS-DA1-5472A <Cat.No.190607>
OPTICAL CHARACTERISTICS
* 本特性は参考です。 NVSW319B
All characteristics shown are for reference only and are not guaranteed. 管理番号 No. STS-DA7-15444
* パルス駆動により測定しています。
The following graphs show the characteristics measured in pulse mode.
発光スペクトル
Spectrum Tcp =6500K
TJ =25°C
Spectrum IFP = 1050mA
1.0
(Normalized to peak spectral intensity)
Relative Emission Intensity(a.u.)
0.8
相対発光強度(最大強度で正規化)
0.6
0.4
0.2
0.0
350 400 450 500 550 600 650 700 750 800
波長
Wavelength(nm)
Directivity1
指向特性
Directivity
TJ =25°C
0°
-10° 10° IFP = 1050mA
-20° 20°
-30° 30°
-40° 40°
-50°
50°
Radiation Angle
放射角度
-60° 60°
-70° 70°
-80° 80°
-90° 90°
1 0.5 0 0.5 1
相対照度
Relative Illuminance(a.u.)
* 本特性は演色性ランクRnnに対応しています。
The graphs above show the characteristics for Rnn LEDs of this product.
17
NICHIA STS-DA1-5472A <Cat.No.190607>
OPTICAL CHARACTERISTICS
* 本特性は参考です。 NVSW319B
All characteristics shown are for reference only and are not guaranteed. 管理番号 No. STS-DA7-14828
* パルス駆動により測定しています。
The following graphs show the characteristics measured in pulse mode.
発光スペクトル
Spectrum Tcp =5000K
TJ =25°C
Spectrum IFP = 1050mA
1.0
(Normalized to peak spectral intensity)
Relative Emission Intensity(a.u.)
0.8
相対発光強度(最大強度で正規化)
0.6
0.4
0.2
0.0
350 400 450 500 550 600 650 700 750 800
波長
Wavelength(nm)
Directivity1
指向特性
Directivity
TJ =25°C
0°
-10° 10° IFP = 1050mA
-20° 20°
-30° 30°
-40° 40°
-50°
50°
Radiation Angle
放射角度
-60° 60°
-70° 70°
-80° 80°
-90° 90°
1 0.5 0 0.5 1
相対照度
Relative Illuminance(a.u.)
* 本特性は演色性ランクR70に対応しています。
The graphs above show the characteristics for R70 LEDs of this product.
18
NICHIA STS-DA1-5472A <Cat.No.190607>
* 本特性は参考です。 NVSW319B
All characteristics shown are for reference only and are not guaranteed. 管理番号 No. STS-DA7-14829
* パルス駆動により測定しています。
The following graphs show the characteristics measured in pulse mode.
順電圧-順電流特性 ジャンクション温度-順電圧特性
Forward Voltage vs Junction Temperature vs
VfIf TaVf
Forward Current Forward Voltage
TJ =25°C IFP=1050mA
3000 3.5
2500
2400
Forward Current(mA)
Forward Voltage(V)
2000 3.0
順電圧
順電流
1500
1050
1000 2.5
500
0 2.0
2.0 2.5 3.0 3.5 -60 -30 0 30 60 90 120 150 180
順電圧 ジャンクション温度
Forward Voltage(V) Junction Temperature(°C)
順電流-相対光束特性 ジャンクション温度-相対光束特性
Forward Current vs Junction Temperature vs
Relative Luminous Flux IfIv Relative Luminous Flux TaIv
TJ =25°C IFP=1050mA
2.5 1.4
相対光束 (IFP= 1050mAで正規化)
2.0 1.2
Relative Luminous Flux(a.u.)
相対光束(T J =25°Cで正規化)
(Normalized at T J =25°C)
1.5 1.0
1.0 0.8
0.5 0.6
0.0 0.4
0 500 1000 1500 2000 2500 3000 -60 -30 0 30 60 90 120 150 180
順電流 ジャンクション温度
Forward Current(mA) Junction Temperature(°C)
* 本特性は色温度2700K~4000K、演色性ランクR70に対応しています。
The graphs above show the characteristics for 2700K~4000K, R70 LEDs of this product.
19
NICHIA STS-DA1-5472A <Cat.No.190607>
* 本特性は参考です。 NVSW319B
All characteristics shown are for reference only and are not guaranteed. 管理番号 No. STS-DA7-15445
* パルス駆動により測定しています。
The following graphs show the characteristics measured in pulse mode.
順電圧-順電流特性 ジャンクション温度-順電圧特性
Forward Voltage vs Junction Temperature vs
VfIf TaVf
Forward Current Forward Voltage
TJ =25°C IFP=1050mA
3000 3.5
2500
2400
Forward Current(mA)
Forward Voltage(V)
2000 3.0
順電圧
順電流
1500
1050
1000 2.5
500
0 2.0
2.0 2.5 3.0 3.5 -60 -30 0 30 60 90 120 150 180
順電圧 ジャンクション温度
Forward Voltage(V) Junction Temperature(°C)
順電流-相対光束特性 ジャンクション温度-相対光束特性
Forward Current vs Junction Temperature vs
Relative Luminous Flux IfIv Relative Luminous Flux TaIv
TJ =25°C IFP=1050mA
2.5 1.4
相対光束 (IFP= 1050mAで正規化)
2.0 1.2
Relative Luminous Flux(a.u.)
相対光束(T J =25°Cで正規化)
(Normalized at T J =25°C)
1.5 1.0
1.0 0.8
0.5 0.6
0.0 0.4
0 500 1000 1500 2000 2500 3000 -60 -30 0 30 60 90 120 150 180
順電流 ジャンクション温度
Forward Current(mA) Junction Temperature(°C)
* 本特性は色温度5700K~6500K、演色性ランクRnnに対応しています。
The graphs above show the characteristics for 5700K~6500K, Rnn LEDs of this product.
20
NICHIA STS-DA1-5472A <Cat.No.190607>
* 本特性は参考です。 NVSW319B
All characteristics shown are for reference only and are not guaranteed. 管理番号 No. STS-DA7-14830
* パルス駆動により測定しています。
The following graphs show the characteristics measured in pulse mode.
順電圧-順電流特性 ジャンクション温度-順電圧特性
Forward Voltage vs Junction Temperature vs
VfIf TaVf
Forward Current Forward Voltage
TJ =25°C IFP=1050mA
3000 3.5
2500
2400
Forward Current(mA)
Forward Voltage(V)
2000 3.0
順電圧
順電流
1500
1050
1000 2.5
500
0 2.0
2.0 2.5 3.0 3.5 -60 -30 0 30 60 90 120 150 180
順電圧 ジャンクション温度
Forward Voltage(V) Junction Temperature(°C)
順電流-相対光束特性 ジャンクション温度-相対光束特性
Forward Current vs Junction Temperature vs
Relative Luminous Flux IfIv Relative Luminous Flux TaIv
TJ =25°C IFP=1050mA
2.5 1.4
相対光束 (IFP= 1050mAで正規化)
2.0 1.2
Relative Luminous Flux(a.u.)
相対光束(T J =25°Cで正規化)
(Normalized at T J =25°C)
1.5 1.0
1.0 0.8
0.5 0.6
0.0 0.4
0 500 1000 1500 2000 2500 3000 -60 -30 0 30 60 90 120 150 180
順電流 ジャンクション温度
Forward Current(mA) Junction Temperature(°C)
* 本特性は色度ランクsm50x(ランク座標範囲内の特別ランクを含む)、演色性ランクR70に対応しています。
The graphs above show the characteristics for sm50x, R70 LEDs, including sub-bins, of this product.
21
NICHIA STS-DA1-5472A <Cat.No.190607>
* 本特性は参考です。 NVSW319B
All characteristics shown are for reference only and are not guaranteed. 管理番号 No. STS-DA7-14831
* パルス駆動により測定しています。
The following graphs show the characteristics measured in pulse mode.
順電流-色度 特性
Forward Current vs
Ifxy Tcp =4000K
Chromaticity Coordinate
T J =25°C
0.40
100mA
0.39
350mA
0.38 1050mA
y
2000mA
0.37
2400mA
0.36
0.36 0.37 0.38 0.39 0.40
ジャンクション温度-色度 特性
Junction Temperature vs Taxy
Tcp =4000K
Chromaticity Coordinate
IFP =1050mA
0.40
0.39
100˚C
85˚C
0.38
y
25˚C
150˚C
0˚C
0.37
-40˚C
0.36
0.36 0.37 0.38 0.39 0.40
* 本特性は演色性ランクR70に対応しています。
The graphs above show the characteristics for R70 LEDs of this product.
22
NICHIA STS-DA1-5472A <Cat.No.190607>
* 本特性は参考です。 NVSW319B
All characteristics shown are for reference only and are not guaranteed. 管理番号 No. STS-DA7-15446
* パルス駆動により測定しています。
The following graphs show the characteristics measured in pulse mode.
順電流-色度 特性
Forward Current vs
Ifxy Tcp =6500K
Chromaticity Coordinate
T J =25°C
0.35
100mA
0.34
350mA
0.33
y
1050mA
0.32 2000mA
2400mA
0.31
0.29 0.30 0.31 0.32 0.33
ジャンクション温度-色度 特性
Junction Temperature vs Taxy
Tcp =6500K
Chromaticity Coordinate
IFP =1050mA
0.35
0.34
100˚C
150˚C
85˚C
0.33
y
25˚C
0˚C
0.32
-40˚C
0.31
0.29 0.30 0.31 0.32 0.33
* 本特性は演色性ランクRnnに対応しています。
The graphs above show the characteristics for Rnn LEDs of this product.
23
NICHIA STS-DA1-5472A <Cat.No.190607>
* 本特性は参考です。 NVSW319B
All characteristics shown are for reference only and are not guaranteed. 管理番号 No. STS-DA7-14832
* パルス駆動により測定しています。
The following graphs show the characteristics measured in pulse mode.
順電流-色度 特性
Forward Current vs
Ifxy Tcp =5000K
Chromaticity Coordinate
T J =25°C
0.38
100mA
0.37
350mA
0.36
1050mA
y
0.35
2000mA
2400mA
0.34
0.33
0.32 0.33 0.34 0.35 0.36 0.37
ジャンクション温度-色度 特性
Junction Temperature vs Taxy
Tcp =5000K
Chromaticity Coordinate
IFP =1050mA
0.38
0.37
100˚C
0.36 85˚C
150˚C 25˚C
y
0.35 0˚C
0.34
-40˚C
0.33
0.32 0.33 0.34 0.35 0.36 0.37
* 本特性は演色性ランクR70に対応しています。
The graphs above show the characteristics for R70 LEDs of this product.
24
NICHIA STS-DA1-5472A <Cat.No.190607>
RELIABILITY
25
NICHIA STS-DA1-5472A <Cat.No.190607>
CAUTIONS
(1) Storage
Conditions Temperature Humidity Time
Before Opening Aluminum Bag ≤30°C ≤90%RH Within 1 Year from Delivery Date
Storage
After Opening Aluminum Bag ≤30°C ≤70%RH ≤168hours
Baking 65±5°C - ≥24hours
● The storage/packaging requirements for this LED are comparable to JEDEC Moisture Sensitivity Level (MSL) 3 or equivalent.
Nichia used IPC/JEDEC STD-020 as a reference to rate the MSL of this LED.
● This LED uses a package that could absorb moisture; if the package absorbs moisture and is exposed to heat during soldering, it
may cause the moisture to vaporize and the package to expand and the resulting pressure may cause internal delamination. This
may cause the optical characteristics to degrade. To minimize moisture absorption in storage/transit, moisture-proof aluminum
bags are used for the LEDs with a silica gel packet to absorb any air moisture in the bag. The silica gel beads turn blue to red as
they absorb moisture.
● Once the moisture-proof aluminum bag is open, ensure that the LED is soldered to a PCB within the range of the conditions above.
To store any remaining unused LEDs, use a hermetically sealed container with silica gel desiccants. Nichia recommends placing
them back to the original moisture-proof bag and reseal it.
● If the “After Opening” storage time has been exceeded or any pink silica gel beads are found, ensure that the LED are baked before
use. Baking should only be done once.
● This LED has gold-plated electrodes. If the LEDs are exposed to a corrosive environment, it may cause the plated surface to
tarnish causing issues (i.e. solderability). Ensure that when storing LEDs, a hermetically sealed container is used. Nichia
recommends placing them back to the original moisture-proof bag and reseal it.
● To prevent substances/gases from affecting the plated surface, ensure that the parts/materials used with the LEDs in the same
assembly/system do not contain sulfur (e.g. gasket/seal, adhesive, etc.). If the plating is contaminated, it may cause issues (e.g.
electric connection failures). If a gasket/seal is used, silicone rubber gaskets/seals are recommended; ensure that this use of
silicone does not result in issues (e.g. electrical connection failures) caused by low molecular weight volatile siloxane.
● To avoid condensation, the LEDs must not be stored in areas where temperature and humidity fluctuate greatly.
● Do not store the LEDs in a dusty environment.
● Do not expose the LEDs to direct sunlight and/or an environment over a long period of time where the temperature is higher than
normal room temperature.
(A) (B)
...
...
● This LED is designed to be operated at a forward current. Ensure that no voltage is applied to the LED in the forward/reverse
direction while the LED is off. If the LEDs are used in an environment where reverse voltages are applied to the LED continuously,
it may cause electrochemical migration to occur causing the LED to be damaged. When not in use for a long period of time, the
system’s power should be turned off to ensure that there are no issues/damage.
● To stabilize the LED characteristics while in use, Nichia recommends that the LEDs are operated at currents ≥ 10% of the sorting
current.
● Ensure that transient excessive voltages (e.g. lighting surge) are not applied to the LEDs.
● If the LEDs are used for outdoor applications, ensure that necessary measures are taken (e.g. protecting the LEDs from water/salt
damage and high humidity).
26
NICHIA STS-DA1-5472A <Cat.No.190607>
27
NICHIA STS-DA1-5472A <Cat.No.190607>
TS Measurement Point
(7) Cleaning
● Do not clean the LEDs with water, benzine and/or thinner.
● To clean the LEDs, use isopropyl alcohol (IPA). If another solvent is used, it may cause the LED package/resin to be damaged
causing issues; ensure that sufficient verification is performed prior to use. Additionally, ensure that the solvent being used does
not cause any other issues (e.g. CFC-based solvents are heavily regulated).
● If an LED is contaminated (e.g. dust/dirt), use a cloth soaked with isopropyl alcohol (IPA). Ensure that the cloth is firmly squeezed
before wiping the LED.
● Do not clean the LEDs with an ultrasonic cleaner. If cleaning must be done, ensure that sufficient verification is performed by using
a finished assembly with LEDs to determine cleaning conditions (e.g. ultrasonic power, LED position on the PCB assembly) that do
not cause an issue.
28
NICHIA STS-DA1-5472A <Cat.No.190607>
(9) Miscellaneous
● Nichia warrants that the discrete LEDs will meet the requirements/criteria as detailed in the Reliability section within this
specification. If the LEDs are used under conditions/environments deviating from or inconsistent with those described in this
specification, the resulting damage and/or injuries will not be covered by this warranty.
● Nichia warrants that the discrete LEDs manufactured and/or supplied by Nichia will meet the requirements/criteria as detailed in
the Reliability section within this specification; it is the customer’s responsibility to perform sufficient verification prior to use to
ensure that the lifetime and other quality characteristics required for the intended use are met.
● The applicable warranty period is one year from the date that the LED is delivered. In the case of any incident that appears to be
in breach of this warranty, the local Nichia sales representative should be notified to discuss instructions on how to proceed while
ensuring that the LED in question is not disassembled or removed from the PCB if it has been attached to the PCB. If a breach of
this warranty is proved, Nichia will provide the replacement for the non-conforming LED or an equivalent item at Nichia’s
discretion. FOREGOING ARE THE EXCLUSIVE REMEDIES AVAILABLE TO THE CUSTOMER IN RESPECT OF THE BREACH OF THE
WARRANTY CONTAINED HEREIN, AND IN NO EVENT SHALL NICHIA BE RESPONSIBLE FOR ANY INDRECT, INCIDENTAL OR
CONSEQUENTIAL LOSSES AND/OR EXPENSES (INCLUDING LOSS OF PROFIT) THAT MAY BE SUFFERED BY THE CUSTOMER
ARISING OUT OF A BREACH OF THE WARRANTY.
● NICHIA DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
● This LED is intended to be used for general lighting, household appliances, electronic devices (e.g. mobile communication
devices); it is not designed or manufactured for use in applications that require safety critical functions (e.g. aircraft, automobiles,
combustion equipment, life support systems, nuclear reactor control system, safety devices, spacecraft, submarine repeaters,
traffic control equipment, trains, vessels, etc.). If the LEDs are planned to be used for these applications, unless otherwise
detailed in the specification, Nichia will neither guarantee that the LED is fit for that purpose nor be responsible for any resulting
property damage, injuries and/or loss of life/health. This LED does not comply with IATF 16949 and is not intended for automotive
applications.
● The customer will not reverse engineer, disassemble or otherwise attempt to extract knowledge/design information from the LED.
● All copyrights and other intellectual property rights in this specification in any form are reserved by Nichia or the right holders who
have granted Nichia permission to use the content. Without prior written permission from Nichia, no part of this specification may
be reproduced in any form or by any means.
● Both the customer and Nichia will agree on the official specifications for the supplied LEDs before any programs are officially
launched. Without this agreement in writing (i.e. Customer Specific Specification), changes to the content of this specification
may occur without notice (e.g. changes to the foregoing specifications and appearance, discontinuation of the LEDs, etc.).
29