Beruflich Dokumente
Kultur Dokumente
LOCTITE® 222
April-2004
m
m
m
Application Threadlocking 5m
05
2
m
0.
0.
m
Strength Low 50
15
0.
LOCTITE® 222 is designed for the locking and sealing of
threaded fasteners which require easy disassembly with 25
standard hand tools. The product cures when confined in the
absence of air between close fitting metal surfaces and 0
prevents loosening and leakage from shock and vibration. 1min 5min10min 30min 1h 3h 6h 24h 72h
Particularly suitable for applications such as adjustment of Cure Time
set screws, small diameter or long engagement length Cure Speed vs. Temperature
fasteners, where easy disassembly is required without The rate of cure will depend on the temperature. The graph
shearing the screw. The thixotropic nature of LOCTITE® 222 below shows the breakaway strength developed with time at
reduces the migration of liquid product after application to the different temperatures on M10 steel nuts and bolts and tested
substrate. according to ISO 10964.
5°C
°C
50
Viscosity, EN 12092 - MV, 25 °C, after 180 s, mPa·s (cP):
22
10964.
ro
St
ch
Di
50
nc
Zi
l
t ee
25 as
s sS
Br es
ainl
St
0
1min 5min10min 30min 1h 3h 6h 24h 72h
Cure Time
TDS LOCTITE® 222, April-2004
% Initial Strength at RT
1 120°C
47 100
7
50 or
at
49ctiv 75
to r 76 A
iva
25 Act
50
150°C
0 25
1min 5min10min 30min 1h 3h 6h 24h 72h
Cure Time
0
0 1000 2000 3000 4000 5000
TYPICAL PROPERTIES OF CURED MATERIAL Hours
Physical Properties:
Coefficient of Thermal Expansion, ASTM D 696, K-1 80×10-6 Chemical/Solvent Resistance
Coefficient of Thermal Conductivity, ASTM C 177, 0.10 Aged under conditions indicated and tested @ 22 °C.
W/(m·K) % of initial strength
Specific Heat, kJ/(kg·K) 0.30
Environment °C 100 hr 500 hr 1000 hr 5000 hr
Motor Oil 125 100 95 90 85
TYPICAL PERFORMANCE OF CURED MATERIAL
Leaded Petrol 22 95 95 95 95
Adhesive Properties
Brake fluid 22 95 95 95 90
After 24 hours @ 22 °C Water Glycol 50/50 87 80 80 80 80
Breakaway Torque, ISO 10964: Acetone 22 100 90 90 90
M10 steel nuts and bolts N·m 6
(lb.in.) (50) Ethanol 22 95 95 90 90
Henkel Loctite Americas Henkel Loctite Europe Henkel Loctite Asia Pacific
+860.571.5100 +49.89.9268.0 +81.45.758.1810
For the most direct access to local sales and technical support visit: www.loctite.com
TDS LOCTITE® 222, April-2004
to the leading threads of the male fitting, leaving the first Note
thread free. Force the material into the threads to The data contained herein are furnished for information only
thouroughly fill the voids. For bigger threads and voids, and are believed to be reliable. We cannot assume
adjust product amount accordingly and apply a 360° bead responsibility for the results obtained by others over whose
of product on the female threads also. methods we have no control. It is the user's responsibility to
determine suitability for the user's purpose of any production
For Disassembly methods mentioned herein and to adopt such precautions as
1. Remove with standard hand tools. may be advisable for the protection of property and of persons
2. In rare instances where hand tools do not work because against any hazards that may be involved in the handling and
of excessive engagement length, apply localized heat to use thereof. In light of the foregoing, Henkel Corporation
nut or bolt to approximately 250 °C. Disassemble while specifically disclaims all warranties expressed or implied,
hot. including warranties of merchantability or fitness for a
particular purpose, arising from sale or use of Henkel
For Cleanup Corporation’s products. Henkel Corporation specifically
1. Cured product can be removed with a combination of disclaims any liability for consequential or incidental
soaking in a Loctite solvent and mechanical abrasion damages of any kind, including lost profits. The discussion
such as a wire brush. herein of various processes or compositions is not to be
interpreted as representation that they are free from
Loctite Material SpecificationLMS domination of patents owned by others or as a license under
LMS dated May-18, 1999. Test reports for each batch are any Henkel Corporation patents that may cover such
available for the indicated properties. LMS test reports include processes or compositions. We recommend that each
selected QC test parameters considered appropriate to prospective user test his proposed application before repetitive
specifications for customer use. Additionally, comprehensive use, using this data as a guide. This product may be covered
controls are in place to assure product quality and by one or more United States or foreign patents or patent
consistency. Special customer specification requirements may applications.
be coordinated through Henkel Loctite Quality.
Trademark usage
Storage LOCTITE is a trademark of Henkel Corporation
Store product in the unopened container in a dry location.
Reference 0.3
Storage information may be indicated on the product container
labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or
greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during
use. Do not return product to the original container. Henkel
Corporation cannot assume responsibility for product which
has been contaminated or stored under conditions other than
those previously indicated. If additional information is required,
please contact your local Technical Service Center or
Customer Service Representative.
Conversions
(°C x 1.8) + 32 = °F
kV/mm x 25.4 = V/mil
mm / 25.4 = inches
N x 0.225 = lb
N/mm x 5.71 = lb/in
N/mm² x 145 = psi
MPa x 145 = psi
N·m x 8.851 = lb·in
N·mm x 0.142 = oz·in
mPa·s = cP
Henkel Loctite Americas Henkel Loctite Europe Henkel Loctite Asia Pacific
+860.571.5100 +49.89.9268.0 +81.45.758.1810
For the most direct access to local sales and technical support visit: www.loctite.com