Beruflich Dokumente
Kultur Dokumente
Agitators
MKG Series MFG Series MKM Series MFM Series MFC Series
● MKG Series
Portable Type Agitator
Medium Speed by Gear Speed Reduction System
● MFG Series
Vertical Type Agitator
Medium Speed by Gear Speed Reduction System
● MKM Series
Portable Type Agitator
Medium & Low Speed by Gear Motor ・ Speed Reduction System
● MFM Series
Vertical Type Agitator
Medium & Low Speed by Gear Motor ・ Speed Reduction System
● MFC Series
Vertical Type Agitator
Medium & Low Speed by Gear Motor ・ Speed Reduction System
This type has its own wide application and functional design.
A combination of the type can be selected freely according to your aims, and speed reducers made
by other companies can be also used besides high precision Cyclone Drive and Bayer Variation.
FEATURES
・Choose from a wide variety of models to match your application.
・Select the agitator construction material to handle fluids under a variety of conditions.
APPLICATIONS
・Chemical dissolving tanks
・Agglutination tank (high-speed, low-speed, pH adjustment)
・Physical and chemical purposes (tests, laboratories, etc.)
SPECIFICATIONS
Max. Agitating
Motor
Volume (ℓ)
Weight
MODEL Horse- Medium
Output Voltage Dilute (kg)
power Viscosity
(kW) V Solution
HP Solution
MKG-7HA 0.065 1/12 100 400 100 11
MKG-10HA 0.1 1/8 100 600 200 13
MKG-10H 0.1 1/8 200 600 200 14
MKG-20HA 0.2 1/4 100 1,200 400 17
MKG-20H 0.2 1/4 200 1,200 400 17
MKG-40H 0.4 1/2 200 2,500 800 22
MKG-75H 0.75 1 200 5,000 1,500 28
MKG-150H 1.5 2 200 10,000 3,000 47
MKG-220H 2.2 3 200 15,000 5,000 58
●Size
3-blade Propeller
Shaft (mm) Size (mm)
(mm)
MODEL Standard 1 st 2nd
Dia
Length Level Level A B C H I E U
(φd)
(L) φD φD
MKG-7HA 600 13 160 -120 374 127 50 4 101 38 47
MKG-10HA 800 13 200 -160 374 127 50 4 101 38 47
MKG-10H 800 13 200 -160 302 127 50 4 101 38 47
MKG-20HA 1,000 16 250 -200 402 127 50 4 101 38 47
MKG-20H 1,000 16 250 -200 336 127 50 4 101 38 47
MKG-40H 1,200 22 300 -250 399 168 50 -23 128 38 47
MKG-75H 1,400 22 350 -300 401 168 50 -23 128 38 47
MKG-150H 1,600 32 400 -350 506 231 74 -41 172 66 72
MKG-220H 1,800 32 450 -400 522 231 74 -41 172 66 144
*Note:
The standard paint color is Munsell 7.5GY-5/5.5
No load operation is forbidden.
Parts which come in contact with the solution are made of SUS304 and/or SUS316 (Austenite
Stainless Steel).
These parts can also be lined with various types of material.
The standard motor is a totally-enclosed/fan-cooled /outdoor type.
6P-motors are available for the out-puts of 0.4kW or larger. In
such case of 6P-motors, all parts other than motor itself shall be of
one-rank-up from those for 4P-motors.
Max. Agitation Volume : [Medium Viscous Solution] to [Dilute
Solution]
SPECIFICATIONS
●Size
Shaft (mm) 3-blade propeller (mm) Size (mm)
MODEL Standard Dia 1st Level 2nd Level
A B E
Length (L) φd φD φD
MFG-10H 800 13 -200 160 329 154 13
MFG-20H 1,000 16 -250 200 363 154 13
MFG-40H 1,200 22 -300 250 426 195 16
MFG-75H 1,400 22 -350 300 428 195 16
MFG-150H 1,600 32 -400 350 551 276 18
MFG-220H 1,800 32 -450 400 567 276 18
*Note:
The standard paint color is Munsell 7.5GY-5/5.5
No load operation is forbidden.
Parts which come in contact with the solution are made of SUS304 and/or SUS316 (Austenite
Stainless Steel).
These parts can also be lined with various types of material.
The standard motor is a totally-enclosed/fan-cooled outdoor type.
6P-motors are available for the out-puts of 0.4kW or larger. In such case of 6P-motors, all parts
other than motor itself shall be of one-rank-up from those for 4P-motors.
The parenthesized figures are for non-standard specification.
Installation flange
α
JIS 10K 100A 45°
JIS 10K 125A 45°
JIS 10K 150A 45°
SPECIFICATIONS
●Size
2-blade
Shaft (mm) Size (mm)
Propeller
MODEL Standard 2 Levels
Dia
Length A B C H I E U
(φd) (φD)
(L)
200
250
MKM-001 1,000 16 300 441 142 50 25 98 38 47
350
500
250
1,000 16 300 475 142 50 25 98 38 47
MKM-002 350
450
1,200 22 504 157 74 14 112 66 72
550
350
1,200 22 400 531 157 14 112 72
MKM-004 450 74 66
550
1500 32 574 187 43 123 144
650
400
MKM-010 1,500 32 500 580 187 74 43 123 66 144
600
*Note:
The standard paint color is Munsell 7.5GY-5/5.5
ELEPON E.C.A.P. Corporation 【8-1 Agitators】 - 4-
No load operation is forbidden.
Parts which come in contact with the solution are made of SUS304 and/or SUS316 (Austenite
Stainless Steel).
These parts can also be lined with various types of material.
The standard motor is a totally-enclosed/fan-cooled outdoor type.
Reduction ratios other than the listed above also can be selected, if needed.
SPECIFICATIONS
200
250
MFM-001 1,000 16 300 468 169 13
350
500
250
1,000 16 300 502 169 13
MFM-002 350
450
1,200 22 531 184 16
550
350
1,200 22 400 558 184 16
MFM-004 450
550
1,500 32 618 231 18
650
400
MFM-010 1,500 32 500 624 231 18
600
Installation flange
α
JIS 10K 100A 45°
JIS 10K 125A 45°
JIS 10K 150A 45°
2-blade
Installation Max. Agitating
Motor Speed Reducer Shaft (mm)
Flange Volume (ℓ)
Propeller Weight
MODEL (mm)
2 Levels (kg)
Out Horse Standard φD Medium
Frame Reduction Dia. JIS 10K Dilute
put power Length (mm) Viscosity
No. Ratio (i) (φd) Solution
(kW) HP (L) Solution
6060 1/11 1,000 16 200 100A 700 300 18
6060 1/17 1,000 16 250 100A 700 300 18
6065 1/29 1,000 16 350 100A 700 300 20
MFC
0.1 1/8 6065 1/35 1,000 16 400 100A 700 300 20
-001
6065 1/43 1,000 16 450 100A 700 300 20
6075 1/59 1,200 22 500 125A 700 300 28
6090 1/87 1,500 32 700 150A 700 300 50
6065 1/11 1,000 16 250 100A 1,300 600 19
6065 1/17 1,000 16 350 100A 1,300 600 20
6075 1/29 1,200 22 450 125A 1,300 600 28
MFC
0.2 1/4 6075 1/35 1,200 22 500 125A 1,300 600 29
-002
6085 1/43 1,200 22 550 125A 1,300 600 33
6090 1/59 1,500 32 600 150A 1,300 600 49
6095 1/87 1,500 32 800 150A 1,300 600 55
6080 1/11 1,200 22 350 125A 2,500 1,200 33
6080 1/17 1,200 22 400 125A 2,500 1,200 33
6090 1/29 1,500 32 550 150A 2,500 1,200 49
MFC
0.4 1/2 6090 1/35 1,500 32 600 150A 2,500 1,200 50
-004
6095 1/43 1,500 32 650 150A 2,500 1,200 50
6105 1/59 1,500 32 900 150A 2,500 1,200 60
6105 1/87 1,500 32 1,150 150A 2,500 1,200 73
6090 1/11 1,500 32 400 150A 5,000 2,500 51
6090 1/17 1,500 32 550 150A 5,000 2,500 53
6100 1/29 1,500 32 700 150A 5,000 2,500 58
MFC
0.75 1 6105 1/35 1,500 32 800 150A 5,000 2,500 62
-010
6105 1/43 1,500 32 900 150A 5,000 2,500 64
6120 1/59 2,200 45 1,000 200A 5,000 2,500 129
6125 1/87 2,200 45 1,350 200A 5,000 2,500 149
6100 1/11 1,500 32 500 150A 10,000 5,000 59
6105 1/17 1,500 32 600 150A 10,000 5,000 60
6120 1/29 2,200 45 800 200A 10,000 5,000 123
MFC
1.5 2 6120 1/35 2,200 45 900 200A 10,000 5,000 125
-020
6125 1/43 2,200 45 1,000 200A 10,000 5,000 133
6130 1/59 2,400 50 1,200 250A 10,000 5,000 212
6145 1/87 2,400 50 1,600 250A 10,000 5,000 270
6105 1/11 1,500 32 550 150A 15,000 7,500 63
6125 1/17 2,200 45 950 200A 15,000 7,500 130
MFC 6125 1/35 2,200 45 1,000 200A 15,000 7,500 137
2.2 3
-030 6135 1/43 2,400 50 1,100 250A 15,000 7,500 211
6145 1/59 2,400 50 1,350 250A 15,000 7,500 228
6160 1/87 2,600 60 1,750 250A 15,000 7,500 339
Reduction Ratio (i) 1/11 1/17 1/29 1/35 1/43 1/59 1/87
Agitating Impellers These deluxe impellers are designed to achieve high fluid dynamics performance.
■ 3-Blade Propeller
【Marine Type】
This propeller has a 3-dimensional twist in the blades. It is used to create a large
circulating current with a minimum of friction loss and has extremely high efficiency from
standpoint of the fluid dynamics performance.
It can be used at speeds ranging from 150~1,800min-1., although many are used at
medium speeds of 200~350min-1
【Standard】
This propeller is widely used as the standard type. It generates a large axial flow and a
large circulation volume can be achieved.
It can be used in the same speed range as the marine type.
■ Paddle
【4-45° Paddles】
The combination of radial flow and axial flow achieved with this paddle impeller generates
a high mixing effect.
It is appropriate for mixing large volumes of comparatively highly viscous solutions(500~
20,000mPa・s) at low speeds.
It is used at speeds where the rotational speed at the blades’ outer circumference is
3m/sec. or lower.
【2-45℃ Paddles】
This impeller is used the same as the 4-45°Paddle type, but it is used in cases where the
blades are required to come as close to the tank walls as possible due to the nature of the
solution to be mixed.
■ Disc Turbine
【6-45° Disc Turbine】
This impeller is used for a variety of tasks to achieve a uniform axial flow, radial flow and
shear flow.
It is ideal for use in mixing uniform highly concentrated solutions with high viscosities
(5,000~20,000 mPa・s). It is used at rotational speeds exceeding 8m/sec. at the outer
circumference of the blades.
■ Stabilizer
【Stabilizer Ring】
In case the shaft is longer than the standard or it’s required to agitate to the bottom of the
tank, this stabilizer ring is particularly effective in prevention of the shaft deflection during
operation.
Ring dimensions should be selected which can keep the shaft stable with respect to the
fluid resistance brought to bear on the inside and outside of the ring.
■Spiral Ribbon
The inside screw pushes the fluid upward while the outside ribbon pushes the fluid
downward, creating a powerful up-and-down circulation flow.
This impeller is suitable for general uses such as mixing of highly viscous solutions,
dissolution and heat transfer.
These seals are easy to install and provide highly effective sealing. Select the type of seal that
Shaft Seals meets your needs.
【Vapor (Oil) Seal】
This seal is used in cases where temperatures and pressures are comparatively low as a
simple means of sealing out dust from the outside of the tank and sealing in the vapor
inside the tank.
Setting is accomplished easily onto the installation seat.