Beruflich Dokumente
Kultur Dokumente
Datasheet
Version 1.02
October 23, 2008
1
Revision History
Revision Date Comments
V1.00 07/06/2007 Initial Release
V1.01 11/27/2007 add 5V to 3.3V regulator electrical specifications; add 3.3V to 1.8V regulator
electrical specifications
2
Table of Contents
1. Introduction ............................................................................................................................................................. 4
1.1 Feature Summary.................................................................................................................... 4
1.2 Firmware/Software Support .................................................................................................. 5
1.3 Devices Support..................................................................................................................... 5
2. INIC-1608 Block Diagram...................................................................................................................................... 6
3. Pin-Out Diagram ..................................................................................................................................................... 7
4. Pin Signal Description: (48-pin package)................................................................................................................ 8
4.1 USB Interface ........................................................................................................................ 8
4.2 SATA Interface (Analog pins) .............................................................................................. 8
4.3 System Interface .................................................................................................................... 8
4.4 Miscellaneous Interface ......................................................................................................... 8
4.5 NVRAM Interface ................................................................................................................. 9
4.6 GPIO Interface....................................................................................................................... 9
4.7 Power Regulator pins ........................................................................................................... 9
4.8 Power/GND ........................................................................................................................... 9
5. Electrical Information ........................................................................................................................................... 10
5.1 Absolute Maximum Ratings................................................................................................ 10
5.2 Recommended Operating Conditions.................................................................................. 10
5.3 General DC Characteristics ................................................................................................. 10
5.4 DC Electrical Characteristics for 3.3V Operation ............................................................... 10
5.5 DC Specification for LDO5033(5V to 3.3V regulator)....................................................... 11
6. Packaging Specification ......................................................................................................................................... 12
3
1. Introduction
The INIC-1608 provides an advanced solution to connect SATA devices to USB Host with
integrated CPU and embedded SRAM/ROM. To provide high performance and cost effective
solution, the INIC-1608 integrates USB-PHY, Mass Storage Class Bulk-Only USB function, SATA
link/PHY core and microprocessor into a single ASIC. The INIC-1608 provides the data transfer
rate of up to 60 MB/sec connecting to a 1.5G SATA interface.
• Integrated internal Turbo 8051 uP with 12KB embedded ROM and 2KB SRAM.
• Support HID.
• Up to 8 GPIO pins.
• Supports SATA (bridged SATA) Hard Disk drives, CD-RW devices, DVDs, Removable
media devices, BD (Blu-Ray Disc) drive
• 48 pin LQFP
4
1.2 Firmware/Software Support
5
2. INIC-1608 Block Diagram
SATA
PHY Disk
Registers
USB
PORT USB
PHY
SATA
Control SATA
Block Link
Command
Buffers Layer
USB
Core
Data Buffer
SATA
(2K Bytes) Transport
Data Flow Control Layer
6
3. Pin-Out Diagram
V G R R G R R G X X G R
3 N V V N V V N T T N S
3 D 5 3 D 1 3 D A A D A
I 3 8 3 L L T
O O I O I A
| | | | | | | | | | | |
4 4 4 4 4 4 4 4 4 3 3 3
8 7 6 5 4 3 2 1 0 9 8 7
VD33P --- 7
INIC-1608 30 --- GND
1 1 1 1 1 1 1 2 2 2 2 2
3 4 5 6 7 8 9 0 1 2 3 4
| | | | | | | | | | | |
G V P P P S S T T T V G
N 3 1 O 1 D C E E E 1 N
D 3 | R | A K S S S 8 D
7 S 4 T T T
T 0 1 2
7
4. Pin Signal Description: (48-pin package)
8
4.5 NVRAM Interface
Signal Name Pin Number I/O Driver Type Description
SDA/ 18 I/O Internal pullup 1. NRAM data input/output.
P1.6 94Kohm— 2. This pin also configured as P1.6 if
261Kohm NVRAM is not used.
SCK/ 19 I/O Internal pullup 1. NVRAM clock.
P1.5 94Kohm— 2. This pin also configured as P1.5 if
261Kohm NVRAM is not used
4.8 Power/GND
Signal Name Pin Number I/O Driver Type Description
V33 14,48 2 pins (Digital 3.3V) for core
V18 4,23 2 pins (Digital 1.8V) for core
GND 5,13,24,47 4 pins
VD33P 7 For USB (3.3V)
VS33P 10 For USB (GND)
VDDU 11 For USB (1.8V)
V33 36 For SATA(3.3V)
V18 25,29,34,35 For SATA(1.8V)
GND 28,30,33,38 For SATA(GND)
9
5. Electrical Information
5.1 Absolute Maximum Ratings
Symbol Parameter Min Max Units
Vcc Power Supply -0.3 3.6 V
Vin Input Voltage -0.3 Vcc+0.3 V
Vout Output Voltage -0.3 Vcc+0.3 V
Tstg Storage Temperature -55 150 °C
10
5.5 DC Specification for LDO5033 (5V to 3.3V regulator)
Symbol Parameter Conditions Min Typ Max Units
VDD50 Input Voltage 3.0 6.0 V
VDD33 Output Voltage In regulation 3.135 3.465 V
region
Maximum ripple on Vout Tested with 40 mV p-p for f<160Mhz
up to 200mv
p-p voltage
ripple on
VDD50
Startup time VDD50 > 100 us
Vop
Ileak Leakage Current Regulator 4 uA
disabled
Cout External capacitor 1 uF
Imax Load current DC 0 200 mA
Hot plug protection and The regulator will not be affected by spikes
spikes protection lass than 30ns and below 10V
The regulator should handle maximum 10
spikes in 1 ms duration
Current limiting Short 350 680 mA
circuit,
VDD50=5V
11
6. Packaging Specification
12