Beruflich Dokumente
Kultur Dokumente
Lighting Specialists
Mariteam Lighting
Company Profile
M a riT e a m L ig h tin g In c .
A Glamox Company
1
Glamox has been manufacturing luminaires since 1947, and currently produces over
5,000 units a day from it’s main factory in Molde, Norway. Glamox luminaires for all types
of marine and offshore installations, are available worldwide through factories and
distributors in 60 countries. Having exported marine and offshore luminaries for over 50
years, Glamox is familiar with marine and offshore standards and regulations all around
the world, and produces an extensive line of fittings for hazardous locations.
Website: www.glamox.com
Founded in 1868 Aqua Signal has over 125 years of experience as a world leading
specialist in maritime lighting technology. The company, based in Bremen, Germany has
subsidiaries in the United States and Australia. Over 60% of the company’s production
of navigation lights, floodlights, interior and exterior marine fittings and emergency
lighting systems are exported.
Website: www.aquasignal.de
For over 50 years Norselight has manufactured marine searchlights and floodlights for
worldwide markets from Halden, Norway. Norselight stepped up to the challenges of the
oil and gas sector with specially designed searchlights and floodlights designed to meet
the requirements of the industry worldwide, including protection class IP67.
Website: www.norselight.com
Hovik’s history is synonymous with electric lights in Norway, being the first company in
Scandinavia to produce lamp glasses as early as 1874. Hovik operates from a modern
factory in Halden, Norway and includes an extensive network of agents and distributors
around the world. Hovik specializes in producing custom decorative fittings to meet the
demanding aesthetic specifications of architects and engineers.
Website: www.glamox.com/hoviklys
M a riT e a m L ig h tin g In c .
2 A Glamox Company
Contents
Our Products
Mariteam Lighting, Inc. manfactures
the CSA and UL approved product
lines of Glamox, Aqua Signal, Machinery space and exterior 5 - 11
Norselight and Hovik Lys in North
America.These four international
companies furnish a broader range of
marine lighting than any other
Accommodation space 12 - 35
company in the world and, in fact,
manufacture and supply more marine
lighting than anyone else in the
industry.
Downlights 36 - 41
At Mariteam, our emphasis is on the
necessity of being in close contact
with the people who use the products.
This contact has resulted in a broad
spectrum of quality marine fixtures for Illuminated signs 42 - 45
all purposes and conditions. Simple
maintenance, long lifetime, light-
guiding reflectors, and low energy
consumption are other key selling
points of our lighting fixtures. Hazardous areas 46 - 53
Floodlights 54 - 61
Searchlights 74 - 77
Technical information 78 - 84
M a riT e a m L ig h tin g In c .
A Glamox Company 3
OptiWin
OptiWin is Glamox’s proprietary lighting design software. It enables even the most novice lighting designer to develop
the optimal lighting solution, providing the maximum lighting for minimal cost.
M a riT e a m L ig h tin g In c .
4 A Glamox Company
Watertight Multipurpose Luminaire, Surface
GSV
IP67 120V/60Hz
Technical Specification
Application: Shower, washroom, interior & exterior
machinery spaces.
Approvals: CSA C22.2 No.250.0-00
Protection: IP67
Housing: Aluzinc sheet steel, deep drawn, seamless.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: 5mm clear acrylic diffuser attached by two screws.
Sealed by neoprene gasket.
Electrics: Flexible wiring, heat resistant to 105°C.
Cable entry: One PG16 cable gland in one end and one
PG16 blind plug in other end. Type Part Number
Lamp base: G5 2X8W 120V/60Hz - HPF GSV 1000
Light source(not included): Fluorescent lamp 8W, T5. Other voltages on request
Mounting: Direct to bulkhead or deckhead.
Spare Parts
Item Description Part No. Item Description Part No.
Ballast 1X8W ;120V/60Hz ; Magnetic 991005 Lampholder 8W ; G5 Push through (4 pcs) 992002
Starter 1X8W ; FS-5 (2 pcs) 995002 Cable Gland PG16 Polyamide (4 pcs) 995000
Lamp 8W/T5 ; Min. bi-pin ; Cool White 994004 Blind plug PG16 Polyamide (4 pcs) 995001
Diffuser Clear polycarbonate, c/w captive screws 993004
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 5
Watertight Multipurpose Luminaire, Surface
GKI
IP54 Battery 120V/60Hz
IP67 Backup 120-277V/50-60Hz
Technical Specification
Application: Decks, machinery spaces, stores, holds, etc.
Approvals: UL 1598 & 1598A and CSA C22.2 No.250.0-00
Protection: IP54 or IP67
Housing: Aluzinc sheet steel or stainless steel, deep drawn,
seamless.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: Clear polycarbonate.
Electrics: Flexible wiring, heat resistant to 105°C; through
wiring up to 15 A.
Cable entry: One M20 cable gland and one M20 blind plug
in each end. Other configurations available upon request.
Lamp base: G13 / 2G11
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast, 20/40W T12 with magnetic ballast,
40W compact fluorescent with electronic ballast.
Battery backup: Optional 90 minute battery backup. 500-
600 lumens for 90 minutes at 20°C. Other configurations
available upon request.
Charge time after full discharge: 24 hours.
Mounting: 2 brackets for direct mounting to bulkhead or
deckhead. Custom mounting brackets are also available.
Options: Low temperature ballast, switchable red center
lamp.
M a riT e a m L ig h tin g In c .
6 A Glamox Company Subject to technical modifications without notice
Watertight Multipurpose Luminaire, Surface
GKI
Without battery backup With 90 m inute battery backup
Voltage Universal Voltage Voltage Universal Voltage
Type 120V/60Hz - HPF 120-277V/50- 120V/60Hz - HPF 120-277V/50-
2X17W IP54 GKI 1000 GKI 1008 GKI 1004 GKI 1040
IP67 GKI 1015 GKI 1042 GKI 1019 GKI 1044
2X17W IP54 GKI 1023 GKI 1046 GKI 1027 GKI 1048
Stainless Steel IP67 GKI 1031 GKI 1050 GKI 1035 GKI 1052
3X17W IP54 GKI 1099 GKI 1101 GKI 1103 GKI 1105
IP67 GKI 1100 GKI 1102 GKI 1104 GKI 1106
3X17W IP54 GKI 1107 GKI 1109 GKI 1111 GKI 1113
Stainless Steel IP67 GKI 1108 GKI 1110 GKI 1112 GKI 1114
2X20W IP54 GKI 1001 - GKI 1005 -
IP67 GKI 1016 - GKI 1020 -
2X20W IP54 GKI 1024 - GKI 1028 -
Stainless Steel IP67 GKI 1032 - GKI 1036 -
2X32W IP54 GKI 1002 GKI 1039 GKI 1006 GKI 1041
IP67 GKI 1017 GKI 1043 GKI 1021 GKI 1045
2X32W IP54 GKI 1025 GKI 1047 GKI 1029 GKI 1049
Stainless Steel IP67 GKI 1033 GKI 1051 GKI 1037 GKI 1053
3X32W IP54 GKI 1083 GKI 1085 GKI 1087 GKI 1089
IP67 GKI 1084 GKI 1086 GKI 1088 GKI 1090
3X32W IP54 GKI 1091 GKI 1093 GKI 1095 GKI 1097
Stainless Steel IP67 GKI 1092 GKI 1094 GKI 1096 GKI 1098
2X40W IP54 GKI 1003 - GKI 1007 -
IP67 GKI 1018 - GKI 1022 -
2X40W IP54 GKI 1026 - GKI 1030 -
Stainless Steel IP67 GKI 1034 - GKI 1038 -
2X40W Com pact Fluorescent IP54 GKI 1078 GKI 1116 GKI 1118 GKI 1120
IP67 GKI 1115 GKI 1117 GKI 1119 GKI 1121
2X40W Com pact Fluorescent IP54 GKI 1122 GKI 1124 GKI 1126 GKI 1128
Stainless Steel IP67 GKI 1123 GKI 1125 GKI 1127 GKI 1129
Other voltages on request
Spare Parts
Item Description Part No. Item Description Part No.
Ballast 2X17/32W; 120V/60Hz 991000 Lamp 17W/T8; Bi-pin; Cool White 994000
2X17/32W; 120-277V/50-60Hz 991003 20W/T12; Bi-pin; Cool White 994001
3X17/32W; 120V/60Hz 991010 32W/T8; Bi-pin; Cool White 994002
3X17/32W; 120-277V/50-60Hz 991006 40W/T12; Bi-pin; Cool White 994003
2X20W; 120V/60Hz; Magnetic 991001 40W/30BX; CF; Cool White 994006
2X40W; 120V/60Hz; Magnetic 991002 Lampholder 17/20/32/40W; G13; White (4 pcs) 992000
2X40W/30BX; 120V/60Hz 991040 40W/30BX; 2G11; White (4 pcs) 992008
2X40W/30BX; 120-277V/50-60Hz 991048 Battery Battery Backup Unit; 90 minute; 120V 991004
Diffuser 2X17/20W; Clear Polycarbonate 993000 Battery Backup Unit; 90 minute; 120-277V 991036
2X32/40W; Clear Polycarbonate 993001 Cable Gland M20 Polyamide (4 pcs) 995067
Lens Clip Stainless Steel (4 pcs) 995047 Blind Plug M20 Polyamide (4 pcs) 995068
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 7
1444 Watertight Multipurpose Luminaire, Surface
Technical Specification
Application: Decks, machinery spaces, stores, holds, etc.
Approvals: UL 1598 & 1598A.
Protection: IP55 or IP 67
Housing: Aluzinc sheet steel or stainless steel, deep drawn,
seamless.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: Clear polycarbonate
Electrics: Fully removable gear tray for easy installation.
Flexible wiring, heat resistant to 105°C; through wiring up to
15 A.
Cable entry: One PG16 cable gland and one PG16 blind
plug in each end. Other configurations available upon
request.
Lamp base: G13
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast, 20/40W T12 with magnetic ballast.
Battery backup: Optional 90 minute battery backup. 500-
600 lumens for 90 minutes at 20°C. Other configurations
available upon request.
Charge time after full discharge: 24 hours.
Mounting: 2 brackets for direct mounting to bulkhead or
deckhead.
Remarks: Low temperature ballast is available upon
request.
M a riT e a m L ig h tin g In c .
8 A Glamox Company Subject to technical modifications without notice
Watertight Multipurpose Luminaire, Surface
1444
Without battery backup With 90 minute battery backup
Voltage Universal Voltage Voltage Universal Voltage
Type 120V/60Hz - HPF 120-277V/50-60Hz 120V/60Hz - HPF 120-277V/50-60Hz
2X17 Watt IP55 0801003001 0801003017 0801003005 0801003018
IP67 0801003003 0801003019 0801003007 0801003020
2X17 Watt IP55 0801003009 0801003021 0801003011 0801003022
Stainless Steel IP67 0801003013 0801003023 0801003015 0801003024
2X20 Watt IP55 0801003002 - 0801003006 -
IP67 0801003004 - 0801003008 -
2X20 Watt IP55 0801003010 - 0801003012 -
Stainless Steel IP67 0801003014 - 0801003016 -
2X32 Watt IP55 0801004001 0801004017 0801004005 0801004018
IP67 0801004003 0801004019 0801004007 0801004020
2X32 Watt IP55 0801004009 0801004021 0801004011 0801004022
Stainless Steel IP67 0801004013 0801004023 0801004015 0801004024
2X40 Watt IP55 0801004002 - 0801004006 -
IP67 0801004004 - 0801004008 -
2X40 Watt IP55 0801004010 - 0801004012 -
Stainless Steel IP67 0801004014 - 0801004016 -
Other voltages on request
Spare Parts
Item Description Part No. Item Description Part No.
Ballast 2X17/32W ; 120V/60Hz ; Electronic 991000 Lampholder 17/20/32/40W ; G13 ; White (4 pcs) 992001
2X20W ; 120V/60Hz ; Magnetic 991001 Diffuser 2X17/20W ; Clear Polycarbonate 993002
2X40W ; 120V/60Hz ; Magnetic 991002 2X32/40W ; Clear Polycarbonate 993003
2X17/32W ; 120-277V/50-60Hz ; Electronic 991003 Battery Battery backup unit ; 90 minute ; 120V 991004
Lamp 17W/T8 ; Bi-pin ; Cool White 994000 Battery backup unit ; 90 minute ; 120-277V 991036
20W/T12 ; Bi-pin ; Cool White 994001 Cable Gland PG16 Polyamide (4pcs) 995000
32W/T8 ; Bi-pin ; Cool White 994002 Blind Plug PG16 Polyamide (4pcs) 995001
40W/T12 ; Bi-pin ; Cool White 994003
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 9
GIOC Industrial/Mining Wet Locations Fixture
120V/60Hz
NEMA 13
120-277V/50-60Hz
Technical Specification
Application: Severe industrial applications including wet
and abrasive environments. Designed to prevent dust from
collecting on lens.
Approvals: CSA C22.2 No.250.0-00
Protection: NEMA 13
Housing: Sheet aluminum.
Finish: Epoxy powder coated, white RAL 9016.
Lens: Safety glass.
Electrics: Flexible wiring, heat resistant to 105°C; through Voltage Universal Voltage
wiring up to 15 A. Type 120V/60Hz - HPF 120-277V/50-60Hz
Cable entry: One ¾” hole in one end & one ¾” blind plug in 3X32 Watt GIOC 1007 GIOC 1008
other end. Other voltages on request
Lamp base: Push on spring loaded lampholders G13.
Light source(not included): Fluorescent lamp; 32W T8 S pare Parts
with electronic ballast.
Mounting: Integral mounting brackets for double chain Item Description Part No.
hanging. Ballast 3X32W ; 120-277V/50-60Hz ; Electronic 991006
3X32W ; 120V/60Hz 991007
Lampholder Spring loaded (4 pcs) 992003
Stationary (4 pcs) 992004
Lamp F32/T8 ; Cool White 994002
Diffuser Lens and frame assembly 993005
M a riT e a m L ig h tin g In c .
10 A Glamox Company Subject to technical modifications without notice
Globe Light
1995
Max. Incandescent 100W max.
277V Compact Fluorescent 9W
Technical Specification
Application: Designed as an alternative to the brass globe
& guard fixture. It is also available in many different color
globes for use as a signalling light. Ideal for salt water
environments.
Approvals: UL 1598 & 1598A.
Protection: Watertight, superior corrosion resistance.
Housing: Special black rigid plastic.
Globe: Impact resistant clear rigid plastic, available in clear,
green, red, blue, & yellow.
Electrics: Fully removable gear tray for easy installation.
Flexible wiring, heat resistant.
Cable entry: Four ¾” NPT threaded openings with 1995 Bulkhead Mount 1995 Deck Mount
knockouts. One ¾” NPT cable gland supplied. Please order
additional cable glands separately.
Lamp base: Medium base screw socket or G23.
Light source(not included): Incandescent 100W max. or
compact fluorescent lamp 9W, G23.
Mounting: 2 integral brackets for direct mounting to
deckhead. Optional wall mounting bracket also available.
Please order separately.
Spare Parts
Item Description Part No. Item Description Part No.
Lampholder G23 Fluorescent (4 pcs) 992005 Globe Clear 993006
Medium screw base (4 pcs) 992006 Green 993007
Ballast Ballast 9W ; 120V/60Hz 991008 Red 993008
Cable Gland 3/4" NPT Polyamide (4 pcs) 995042 Yellow 993009
Blue 993010
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 11
DLT RS (M) FR Ceiling Luminaire, Recessed
Battery 120V/60Hz
IP20
Backup 120-277V/50-60Hz
Technical Specification
Application: Interior, recessed mounted.
Approvals: UL 1598 & 1598A and CSA C22.2 No.250.0-00
Protection: IP20
Housing: Aluzinc sheet steel.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: Aluminium extrusion frame with a selection of
different acrylic diffuser materials. FR1: Double prismatic FR1 Diffuser Shown
acrylic panel, FR2: Acrylic opal panel, FR3: White acrylic
grid, FR4: Metallised acrylic grid in silver.
Electrics: Flexible wiring, heat resistant to 105°C; through
wiring up to 15 A.
Cable entry: One ½” knockout in each end and back.
Lamp base: G13
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast, 20/40W T12 with magnetic ballast.
Battery backup: Optional 90-minute battery backup. 500-
600 lumens for 90 minutes at 20°C. Other configurations
available upon request.
Charge time after full discharge: 24 hours.
Mounting: Designed for recessed parallel mounting in a
linear interlocking ceiling system.(Dampa, Dana Acoustic,
BIP, etc.). Mounting kit provided.
Dimming: Optional dimming ballast available upon request.
M a riT e a m L ig h tin g In c .
12 A Glamox Company Subject to technical modifications without notice
Ceiling Luminaire, Recessed
DLT RS (M) FR
Spare Parts
Item Description Part No. Item Description Part No.
Ballast 2X17/32W ; 120V/60Hz ; Electronic 991000 Lampholder 17/20/32/40W ; G13 ; White (4 pcs) 992001
2X20W ; 120V/60Hz ; Magnetic 991001 Battery Battery backup unit ; 90 minute ; 120V 991004
2X40W ;120V/60Hz ; Magnetic 991002 Battery backup unit ; 90 minute ; 120-277V 991036
2X17/32W ;120-277V/50-60Hz ; Electronic 991003 Lamp 17W/T8 ; Bi-pin ; Cool White 994000
Diffuser FR1: 17/20W Double prismatic 993011 20W/T12 ; Bi-pin ; Cool White 994001
(including frame) FR2: 17/20W Opal diffuser 993012 32W/T8 ; Bi-pin ; Cool White 994002
FR3: 17/20W White plastic grid 993013 40W/T12 ; Bi-pin ; Cool White 994003
FR4: 17/20W Metallised silver grid 993014
FR1: 32/40W Double prismatic 993015
FR2: 32/40W Opal diffuser 993016
FR3: 32/40W White plastic grid 993017
FR4: 32/40W Metallised silver grid 993018
FR1 FR2
FR3 FR4
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 13
DLT RT (M) FR Ceiling Luminaire, Recessed
Battery 120V/60Hz
IP20
Backup 120-277V/50-60Hz
Technical Specification
Application: Interior, recessed mounted.
Approvals: UL 1598 & 1598A and CSA C22.2 No.250.0-00
Protection: IP20
Housing: Aluzinc sheet steel.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: Aluminium extrusion frame with a selection of
different acrylic diffuser materials. FR1: Double prismatic
FR1 Diffuser Shown
acrylic panel, FR2: Acrylic opal panel, FR3: White acrylic
grid, FR4: Metallised acrylic grid in silver.
Electrics: Flexible wiring, heat resistant to 105°C; through
wiring up to 15 A.
Cable entry: One ½” knockout in each end and back.
Lamp base: G13
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast, 20/40W T12 with magnetic ballast.
Battery backup: Optional 90-minute battery backup. 500-
600 lumens for 90 minutes at 20°C. Other configurations
available upon request.
Charge time after full discharge: 24 hours.
Mounting: Designed for recessed transverse mounting in a
linear interlocking ceiling system (Dampa, Dana Acoustic,
BIP, etc.). Mounting kit provided.
Dimming: Optional dimming ballast available upon request.
M a riT e a m L ig h tin g In c .
14 A Glamox Company Subject to technical modifications without notice
Ceiling Luminaire, Recessed
DLT RT (M) FR
Spare Parts
Item Description Part No. Item Description Part No.
Ballast 2X17/32W ; 120V/60Hz ; Electronic 991000 Lampholder 17/20/32/40W ; G13 ; White (4 pcs) 992001
2X20W ; 120V/60Hz ; Magnetic 991001 Battery Battery backup unit ; 90 minute ; 120V 991004
2X40W ; 120V/60Hz ; Magnetic 991002 Battery backup unit ; 90 minute ; 120-277V 991036
2X17/32W ; 120-277V/50-60Hz ; Electronic 991003 Lamp 17W/T8 ; Bi-pin ; Cool White 994000
Diffuser FR1: 17/20W Double prismatic 993019 20W/T12 ; Bi-pin ; Cool White 994001
(including frame) FR2: 17/20W Opal diffuser 993020 32W/T8 ; Bi-pin ; Cool White 994002
FR3: 17/20W White plastic grid 993021 40W/T12 ; Bi-pin ; Cool White 994003
FR4: 17/20W Metallised silver grid 993022
FR1: 32/40W Double prismatic 993023
FR2: 32/40W Opal diffuser 993024
FR3: 32/40W White plastic grid 993025
FR4: 32/40W Metallised silver grid 993026
FR1 FR2
FR3 FR4
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 15
DLT RS (M) BW/DL Ceiling Luminaire, Recessed
Battery 120V/60Hz
IP20
Backup 120-277V/50-60Hz
Technical Specification
Application: Interior, recessed mounted.
Approvals: UL 1598 & 1598A and CSA C22.2 No.250.0-00
Protection: IP20
Housing: Aluzinc sheet steel.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: Available with either a BatWing (BW) or DarkLight
(DL) aluminium louver with a clear acrylic finish.
Electrics: Flexible wiring, heat resistant to 105°C; through
wiring up to 15 A. DarkLight(DL) Louver
Cable entry: One ½” knockout in each end and back.
Lamp base: G13
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast, 20/40W T12 with magnetic ballast.
Battery backup: Optional 90-minute battery backup. 500-
600 lumens for 90 minutes at 20°C. Other configurations
available upon request.
Charge time after full discharge: 24 hours.
Mounting: Designed for recessed parallel mounting in a
linear interlocking ceiling system. (Dampa, Dana Acoustic,
BIP, etc.). Mounting kit provided.
Dimming: Optional dimming ballast available upon request.
BatWing(BW) Louver
M a riT e a m L ig h tin g In c .
16 A Glamox Company Subject to technical modifications without notice
Ceiling Luminaire, Recessed
DLT RS (M) BW/DL
Spare Parts
Item Description Part No. Item Description Part No.
Ballast 2X17/32W ; 120V/60Hz ; Electronic 991000 Lampholder 17/20/32/40W ; G13 ; White (4 pcs) 992001
2X20W ; 120V/60Hz ; Magnetic 991001 Battery Battery backup unit ; 90 minute ; 120V 991004
2X40W ;120V/60Hz ; Magnetic 991002 Battery backup unit ; 90 minute ; 120-277V 991036
2X17/32W ;120-277V/50-60Hz ; Electronic 991003 Lamp 17W/T8 ; Bi-pin ; Cool White 994000
Louver BW: 17/20W BatWing Louver 993068 20W/T12 ; Bi-pin ; Cool White 994001
DL: 17/20W DarkLight Louver 993069 32W/T8 ; Bi-pin ; Cool White 994002
BW: 32/40W BatWing Louver 993070 40W/T12 ; Bi-pin ; Cool White 994003
DL: 32/40W DarkLight Louver 993071
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 17
DLT RT (M) BW/DL Ceiling Luminaire, Recessed
Battery 120V/60Hz
IP20
Backup 120-277V/50-60Hz
Technical Specification
Application: Interior, recessed mounted.
Approvals: UL 1598 & 1598A and CSA C22.2 No.250.0-00
Protection: IP20
Housing: Aluzinc sheet steel.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: Available with either a BatWing (BW) or DarkLight
(DL) aluminium louver with a clear acrylic finish.
Electrics: Flexible wiring, heat resistant to 105°C; through DarkLight(DL) Louver
wiring up to 15 A.
Cable entry: One ½” knockout in each end and back.
Lamp base: G13
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast, 20/40W T12 with magnetic ballast.
Battery backup: Optional 90-minute battery backup. 500-
600 lumens for 90 minutes at 20°C. Other confiqurations
available upon request.
Mounting: Designed for recessed transverse mounting in a
interlocking ceiling system (Dampa, Dana Acoustic, BIP,
etc.). Also, suitable for most other tiled ceiling. Mounting kit
provided.
Dimming: Optional dimming ballast available upon request.
BatWing(BW) Louver
M a riT e a m L ig h tin g In c .
18 A Glamox Company Subject to technical modifications without notice
Ceiling Luminaire, Recessed
DLT RT (M) BW/DL
Spare Parts
Item Description Part No. Item Description Part No.
Ballast 2X17/32W ; 120V/60Hz ; Electronic 991000 Lampholder 17/20/32/40W ; G13 ; White (4 pcs) 992000
2X20W ; 120V/60Hz ; Magnetic 991001 Battery Battery backup unit ; 90 minute ; 120V 991004
2X40W ;120V/60Hz ; Magnetic 991002 Battery backup unit ; 90 minute ; 120-277V 991036
2X17/32W ;120-277V/50-60Hz ; Electronic 991003 Lamp 17W/T8 ; Bi-pin ; Cool White 994000
Louver BW: 17/20W BatWing Louver 993082 20W/T12 ; Bi-pin ; Cool White 994001
DL: 17/20W DarkLight Louver 993072 32W/T8 ; Bi-pin ; Cool White 994002
BW: 32/40W BatWing Louver 993073 40W/T12 ; Bi-pin ; Cool White 994003
DL: 32/40W DarkLight Louver 993074
M a riT e a m L ig h tin g In c .
Subject to technical modifications without notice
A Glamox Company 19
DLT RS (JM) FR Ceiling Luminaire, Recessed
Battery 120V/60Hz
IP23
Backup 120-277V/50-60Hz
Technical Specification
Application: Interior, recessed mounted.
Approvals: UL 1598 & 1598A and CSA C22.2 No.250.0-00
Protection: IP23
Housing: Aluzinc sheet steel.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: Aluminium extrusion frame with a selection of FR1 Diffuser Shown
different acrylic diffuser materials. FR1: Double prismatic
acrylic panel, FR2: acrylic opal panel, FR3: White acrylic
grid, FR4: Metallised acrylic grid in silver.
Electrics: Flexible wiring, heat resistant to 105°C; through
wiring up to 15 A.
Cable entry: One ½” knockout in each end.
Lamp base: G13
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast, 20/40W T12 with magnetic ballast.
Battery backup: Optional 90-minute battery backup. 500-
600 lumens for 90 minutes at 20°C. Other configurations
available upon request.
Charge time after full discharge: 24 hours.
Mounting: Designed for recessed parallel mounting in a
Jamestown Marine C70 ceiling. Fixed mounting hardware.
Dimming: Optional dimming ballast available upon request.
M a riT e a m L ig h tin g In c .
20 A Glamox Company Subject to technical modifications without notice
Ceiling Luminaire, Recessed
DLT RS (JM) FR
Spare Parts
Item Description Part No. Item Description Part No.
Ballast 2X17/32W ; 120V/60Hz ; Electronic 991000 Lampholder 17/20/32/40W ; G13 ; White (4 pcs) 992001
2X20W ; 120V/60Hz ; Magnetic 991001 Battery Battery backup unit ; 90 minute ; 120V 991004
2X40W ; 120V/60Hz ; Magnetic 991002 Battery backup unit ; 90 minute ; 120-277V 991036
2X17/32W ; 120-277V/50-60Hz ; Electronic 991003 Lamp 17W/T8 ; Bi-pin ; Cool White 994000
Diffuser FR1: 17/20W Double prismatic 993011 20W/T12 ; Bi-pin ; Cool White 994001
(including frame) FR2: 17/20W Opal diffuser 993012 32W/T8 ; Bi-pin ; Cool White 994002
FR3: 17/20W White plastic grid 993013 40W/T12 ; Bi-pin ; Cool White 994003
FR4: 17/20W Metallised silver grid 993014
FR1: 32/40W Double prismatic 993015
FR2: 32/40W Opal diffuser 993016
FR3: 32/40W White plastic grid 993017
FR4: 32/40W Metallised silver grid 993018
FR1 FR2
FR3 FR4
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 21
DLT RT (JM) FR Ceiling Luminaire, Recessed
Battery 120V/60Hz
IP23
Backup 120-277V/50-60Hz
Technical Specification
Application: Interior, recessed mounted.
Approvals: UL 1598 & 1598A and CSA C22.2 No.250.0-00
Protection: IP23
Housing: Aluzinc sheet steel.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: Aluminium extrusion frame with a selection of
different acrylic diffuser materials. FR1: Double prismatic FR1 Diffuser Shown
acrylic panel, FR2: acrylic opal panel, FR3: White acrylic
grid, FR4: Metallised acrylic grid in silver.
Electrics: Flexible wiring, heat resistant to 105°C; through
wiring up to 15 A.
Cable entry: One ½” knockout in each end.
Lamp base: G13
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast, 20/40W T12 with magnetic ballast.
Battery backup: Optional 90-minute battery backup. 500-
600 lumens for 90 minutes at 20°C. Other configurations
available upon request.
Charge time after full discharge: 24 hours.
Mounting: Designed for recessed transverse mounting in a
Jamestown Marine C70 ceiling. Fixed mounting hardware.
Dimming: Optional dimming ballast available upon request.
M a riT e a m L ig h tin g In c .
22 A Glamox Company Subject to technical modifications without notice
Ceiling Luminaire, Recessed
DLT RT (JM) FR
Spare Parts
Item Description Part No. Item Description Part No.
Ballast 2X17/32W ; 120V/60Hz ; Electronic 991000 Lampholder 17/20/32/40W ; G13 ; White (4 pcs) 992001
2X20W ; 120V/60Hz ; Magnetic 991001 Battery Battery backup unit ; 90 minute ; 120V 991004
2X40W ; 120V/60Hz ; Magnetic 991002 Battery backup unit ; 90 minute ; 120-277V 991036
2X17/32W ;120-277V/50-60Hz ; Electronic 991003 Lamp 17W/T8 ; Bi-pin ; Cool White 994000
Diffuser FR1: 17/20W Double prismatic 993027 20W/T12 ; Bi-pin ; Cool White 994001
(including frame) FR2: 17/20W Opal diffuser 993028 32W/T8 ; Bi-pin ; Cool White 994002
FR3: 17/20W White plastic grid 993029 40W/T12 ; Bi-pin ; Cool White 994003
FR4: 17/20W Metallised silver grid 993030
FR1: 32/40W Double prismatic 993031
FR2: 32/40W Opal diffuser 993032
FR3: 32/40W White plastic grid 993033
FR4: 32/40W Metallised silver grid 993034
FR1 FR2
FR3 FR4
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 23
DLT RT (M) 609 FR Ceiling Luminaire, Recessed
Battery 120V/60Hz
IP20
Backup 120-277V/50-60Hz
Technical Specification
Application: Interior, recessed mounted.
Approvals: UL 1598 & 1598A and CSA C22.2 No.250.0-00
Protection: IP20
Housing: Aluzinc sheet steel.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: Aluminium extrusion frame with a selection of
different acrylic diffuser materials. FR1: Double prismatic
acrylic panel, FR2: Acrylic opal panel, FR3: White acrylic
grid, FR4: Metallised acrylic grid in silver.
FR1 Diffuser Shown
Electrics: Flexible wiring, heat resistant to 105°C; through
wiring up to 15 A.
Cable entry: Two ½” knockouts in each end.
Lamp base: G13
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast, 20/40W T12 with magnetic ballast.
Battery backup: Optional 90-minute battery backup. 500-
600 lumens for 90 minutes at 20°C. Other configurations
available upon request.
Charge time after full discharge: 24 hours.
Mounting: Designed for 24” / 609mm inverted T-bar ceiling.
Standard side mounting kit provided.
Dimming: Optional dimming ballast available upon request.
M a riT e a m L ig h tin g In c .
24 A Glamox Company Subject to technical modifications without notice
Ceiling Luminaire, Recessed
DLT RT (M) 609 FR
Without battery backup With 90 minute battery backup
Diffuser Voltage Universal Voltage Voltage Universal Voltage
Type Type 120V/60Hz - HPF 120-277V/50-60Hz 120V/60Hz - HPF 120-277V/50-60Hz
2X32 Watt FR1 DLT 2019 DLT 2031 DLT 2025 DLT 2037
FR2 DLT 2046 DLT 2067 DLT 2058 DLT 2073
FR3 DLT 2082 DLT 2103 DLT 2094 DLT 2109
FR4 DLT 2118 DLT 2139 DLT 2130 DLT 2145
3X32 Watt FR1 DLT 2020 DLT 2032 DLT 2026 DLT 2038
FR2 DLT 2047 DLT 2068 DLT 2059 DLT 2074
FR3 DLT 2083 DLT 2104 DLT 2095 DLT 2110
FR4 DLT 2119 DLT 2140 DLT 2131 DLT 2146
4X32 Watt FR1 DLT 2021 DLT 2033 DLT 2027 DLT 2039
FR2 DLT 2048 DLT 2069 DLT 2060 DLT 2075
FR3 DLT 2084 DLT 2105 DLT 2096 DLT 2111
FR4 DLT 2120 DLT 2141 DLT 2132 DLT 2147
2X40 Watt FR1 DLT 2003 - DLT 2009 -
FR2 DLT 2049 - DLT 2061 -
FR3 DLT 2085 - DLT 2097 -
FR4 DLT 2121 - DLT 2133 -
3X40 Watt FR1 DLT 2004 - DLT 2010 -
FR2 DLT 2050 - DLT 2062 -
FR3 DLT 2086 - DLT 2098 -
FR4 DLT 2122 - DLT 2134 -
4X40 Watt FR1 DLT 2005 - DLT 2011 -
FR2 DLT 2051 - DLT 2063 -
FR3 DLT 2087 - DLT 2099 -
FR4 DLT 2123 - DLT 2135 -
Spare Parts
Item Description Part No. Item Description Part No.
Ballast 2X17/32W ; 120V/60Hz ; Electronic 991000 Diffuser FR4: 17/20W Metallised silver grid 993038
2X20W ; 120V/60Hz ; Magnetic 991001 (including frame) FR1: 32/40W Double prismatic 993039
2X40W ; 120V/60Hz ; Magnetic 991002 FR2: 32/40W Opal diffuser 993040
2X17/32W ; 120-277V/50-60Hz ; Electronic 991003 FR3: 32/40W White plastic grid 993041
3X32W ; 120-277V/50-60Hz ; Electronic 991006 FR4: 32/40W Metallised silver grid 993042
3X17W ; 120-277V/50-60Hz ; Electronic 991009 Lampholder 17/20/32/40W ; G13 ; White (4 pcs) 992001
3X17/32W ; 120V/60Hz ; Electronic 991010 Battery Battery backup unit ; 90 minute ; 120V 991004
3X20W ; 120V/60Hz ; Magnetic 991011 Battery backup unit ; 90 minute ; 120-277V 991036
3X40W ; 120V/60Hz ; Magnetic 991012 Lamp 17W/T8 ; Bi-pin ; Cool White 994000
Diffuser FR1: 17/20W Double prismatic 993035 20W/T12 ; Bi-pin ; Cool White 994001
(including frame) FR2: 17/20W Opal diffuser 993036 32W/T8 ; Bi-pin ; Cool White 994002
FR3: 17/20W White plastic grid 993037 40W/T12 ; Bi-pin ; Cool White 994003
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 25
GIM Interior Fixture, Recessed, IP44
Battery 120V/60Hz
IP44
Backup 120-277V/50-60Hz
Technical Specification
Application: Cabins, corridors, galleys, pantries, etc.
Approvals: UL 1598 & 1598A and CSA C22.2 No.250.0-00
Protection: IP44
Housing: Aluzinc sheet steel.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: Clear prismatic acrylic diffuser.
Electrics: Flexible wiring, heat resistant to 105°C; through
wiring up to 15 A.
Cable entry: Two ½” knockouts in each end.
Lamp base: G13
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast, 20/40W T12 with magnetic ballast.
Battery backup: Optional 90-minute battery backup. 500-
600 lumens for 90 minutes at 20°C. Other configurations
available upon request.
Charge time after full discharge: 24 hours.
Mounting: Recessed in solid ceiling, swing out brackets for
easy adjustment.
Dimming: Optional dimming ballast available upon request.
Spare Parts
Item Description Part No. Item Description Part No.
Ballast 2X17/32W ; 120V/60Hz ; Electronic 991000 Lamp 17W/T8 ; Bi-pin ; Cool White 994000
2X20W ; 120V/60Hz ; Magnetic 991001 20W/T12 ; Bi-pin ; Cool White 994001
2X40W ; 120V/60Hz ; Magnetic 991002 32W/T8 ; Bi-pin ; Cool White 994002
2X17/32W ; 120-277V/50-60Hz ; Electronic 991003 40W/T12 ; Bi-pin ; Cool White 994003
Lampholder 17/20/32/40W ; G13 ; White (4 pcs) 992000 Diffuser 2X17/20W 993075
Battery Battery backup unit ; 90 minute ; 120V 991004 (including frame) 2X32/40W 993076
Battery backup unit ; 90 minute ; 120-277V 991036
M a riT e a m L ig h tin g In c .
26 A Glamox Company Subject to technical modifications without notice
Interior Fixture, Recessed, IP44
GIM M300
Battery 120V/60Hz
IP44
Backup 120-277V/50-60Hz
Technical Specification
Application: Cabins, corridors, galleys, pantries etc.
Approvals: UL 1598 & 1598A and CSA C22.2 No.250.0-00
Protection: IP44
Housing: Aluzinc sheet steel.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: Clear prismatic acrylic diffuser.
Electrics: Flexible wiring, heat resistant to 105°C; through
wiring up to 15 A.
Cable entry: Two ½” knockouts in each end.
Lamp base: G13
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast, 20/40W T12 with magnetic ballast.
Battery backup: Optional 90-minute battery backup. 500-
600 lumens for 90 minutes at 20°C. Other configurations
available upon request.
Charge time after full discharge: 24 hours.
Mounting: Recessed in 300mm linear tiled ceiling, swing
out brackets for easy adjustment.
Dimming: Optional dimming ballast available upon request.
Spare Parts
Item Description Part No. Item Description Part No.
Ballast 2X17/32W ; 120V/60Hz ; Electronic 991000 Lamp 17W/T8 ; Bi-pin ; Cool White 994000
2X20W ; 120V/60Hz ; Magnetic 991001 20W/T12 ; Bi-pin ; Cool White 994001
2X40W ; 120V/60Hz ; Magnetic 991002 32W/T8 ; Bi-pin ; Cool White 994002
2X17/32W ; 120-277V/60Hz ; Electronic 991003 40W/T12 ; Bi-pin ; Cool White 994003
Lampholder 17/20/32/40W ; G13 ; White (4 pcs) 992000 Diffuser 2X17/20W 993077
Battery Battery backup unit ; 90 minute ; 120V 991004 (including frame) 2X32/40W 993078
Battery backup unit ; 90 minute ; 120-277V 991036
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 27
1961 Interior Fixture, Surface
120V/60Hz
IP66
120-277V/50-60Hz
Technical Specification
For galleys there are strict hygienic rules. This has
been taken into account when designing this
luminaire. The soft contours enable easy and rapid
cleaning.
Application: Galleys, pantries, provision stores etc.
Approvals: UL 1598 & 1598A and US Dept. of Public
Health.
Protection: IP66
Materials: Stainless steel backplate and aluzinc sheet
steel geartray.
Finish: Geartray: epoxy powder coated, white RAL 9016.
Diffuser: Clear polycarbonate.
Electrics: Flexible wiring, heat resistant to 105°C.
Cable entry: Two inlets for max. cable diameter of 11mm.
Lamp base: G13
Light source(not included): Fluorescent lamp; 17/32W
T8 with electronic ballast.
Mounting: Direct to continously flat ceiling. 6/10 mounting
holes, 5mm in diameter.
Voltage Universal Voltage
Type 120V/60Hz - HPF 120-277V/50-60Hz
2X17 Watt 0801009001 0801009004
2X32 Watt 0801010001 0801010002
Other voltages on request
Spare Parts
Item Description Part No. Item Description Part No.
Ballast 2X17/32W ; 120V/60Hz ; Electronic 991000 Lampholder 17/20/32/40W ; G13 ; White (4 pcs) 992000
2X17/32W ; 120-277V/50-60Hz ; Electronic 991003 Diffuser 2X17W ; Clear polycarbonate 993043
Lamp 17W/T8 ; Bi-pin ; Cool White 994000 2X32W ; Clear polycarbonate 993044
32W/T8 ; Bi-pin ; Cool White 994002 Lens Screw Lens screw kit (4 pcs) 995033
M a r iT e a m L i g h t i n g I n c .
28 A Glamox Company Subject to technical modifications without notice
Interior Fixture, Surface/Semi Recessed
1600
120V/60Hz
IP20
120-277V/50-60Hz
Technical Specification
Application: Accommodation areas, public areas, etc.
Approvals: UL1598 and 1598A
Protection: IP20
Housing: Aluzinc sheet steel.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: Clear acrylic diffuser with “Ice Crystal” pattern or
Opal Polycarbonate.
Electrics: Flexible wiring, heat resistant to 105°C; through
wiring up to 15 A.
Cable entry: Two ½” knockouts in each end.
Lamp base: G13
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast, 20/40W T12 with magnetic ballast.
Mounting: Direct to ceiling or semi recessed.
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 29
GKASA Interior Cornice Fixture
Battery 120V/60Hz
IP20
Backup 120-277V/50-60Hz
Technical Specification
Application: Cabins, corridors, restrooms, etc.
Approvals: UL 1598 & 1598A and CSA C22.2 No.250.0-00
Protection: IP20
Housing: Aluzinc sheet steel.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: 3mm opal acrylic diffuser attached by endcaps.
Electrics: Flexible wiring, heat resistant to 105°C.
Cable entry: One ½” knockout in back and top.
Lamp base: G13
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast, 20/40W T12 with magnetic ballast.
Battery backup: Optional 90-minute battery backup. 500-
600 lumens for 90 minutes at 20°C. Other configurations
available upon request.
Charge time after full discharge: 24 hours.
Mounting: Cornice mounting, direct to bulkhead or
deckhead.
Spare Parts
Item Description Part No. Item Description Part No.
Ballast 1X17W ; 120V/60Hz ; Magnetic 991014 Lampholder 17/20/32/40W ; G13 ; White (4 pcs) 992001
1X32W ; 120V/60Hz ; Electronic 991000 Diffuser 17/20W ; Opal diffuser 993052
1X20W ; 120V/60Hz ; Magnetic 991016 32/40W ; Opal diffuser 993053
1X40W ; 120V/60Hz ; Magnetic 991017 Battery Battery backup unit ; 90 minute ; 120V 991004
2X17/32W ; 120-277V/50-60Hz ; Electronic 991003 Battery backup unit ; 90 minute ; 120-277V 991036
2X17/32W ;120V/60Hz ; Electronic 991000 Lamp 17W/T8 ; Bi-pin ; Cool White 994000
2X20W ; 120V/60Hz ; Magnetic 991001 20W/T12 ; Bi-pin ; Cool White 994001
2X40W ; 120V/60Hz ; Magnetic 991002 32W/T8 ; Bi-pin ; Cool White 994002
40W/T12 ; Bi-pin ; Cool White 994003
M a riT e a m L ig h tin g In c .
30 A Glamox Company Subject to technical modifications without notice
Berth Light
GB2
IP22 120V/60Hz Receptacle
Technical Specification
Application: Mirror and berths.
Approvals: UL 1598 & 1598A and CSA C22.2 No.250.0-00
Protection: IP22
Housing: Aluzinc sheet steel.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: 3mm opal acrylic diffuser attached by endcaps.
Electrics: Flexible wiring, heat resistant to 105°C.
Cable entry: One ½” knockout in back and side.
Lamp base: G5
Light source(not included): Fluorescent lamp 8W, T5.
Mounting: Direct to bulkhead or deckhead. Type Part Number
Remarks: Optional On/Off switch and convenience 1X8W
receptacle. 120V/60Hz - HPF GB2 1000
Spare Parts 1X8W
Item Description Part No. c/w on-off switch 120V/60Hz - HPF GB2 1001
Ballast 1X8W ; 120V/60Hz ; Magnetic 991005 1X8W
Starter 1X8W ; FS-5 (2 pcs) 995002 c/w convenience receptacle 120V/60Hz - HPF GB2 1002
Lamp 8W/T5 ; Min. bi-pin ; Cool White 994004 1X8W
Lampholder 8W ; G5 Push through (4 pcs) 992002 c/w on-off switch & convenience receptacle 120V/60Hz - HPF GB2 1003
Diffuser Opal diffuser 993049 Other voltages on request
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 31
GSB Interior Task Lighting
Technical Specification
Application: Bathrooms, mirrors, desk, berths, etc.
Approvals: UL 1598 & 1598A and CSA C22.2 No.250.0-00
Protection: IP44
Housing: Aluzinc sheet steel.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: 3mm opal acrylic diffuser attached by endcaps.
Electrics: Flexible wiring, heat resistant to 105°C.
Cable entry: One ½” knockout in back and side.
Lamp base: G13
Light source(not included): Fluorescent lamp 15/17W T8
and 140/30BX compact fluorescent lamp.
Mounting: Direct to bulkhead or deckhead.
Remarks: Optional On-Off switch, convenience receptacle
or razor only receptacle with isolation transformer.
M a riT e a m L ig h tin g In c .
32 A Glamox Company Subject to technical modifications without notice
Interior Task Lighting
GSB
Spare Parts
Item Description Part No. Item Description Part No.
Ballast 1X15W ; 120V/60Hz ; Magnetic 991013 Lampholder 15W/17W ; G13 ; White (4 pcs) 992007
1X17W ; 120V/60Hz ; Magnetic 991014 40/30BX ; 2G11 ; White (4 pcs) 992008
1X40/30BX ; 120V/60Hz ; Electronic 991015 Diffuser 15W ; Opal diffuser 993050
Transformer Isolation transformer ; 20VA 995004 17W , F40/30BX ; Opal diffuser 993051
Lamp 15W/T8 ; Bi-pin ; Cool White 994005
17W/T8 ; Bi-pin ; Cool White 994000
F40/30BX ; 2G11 ; Cool White 994006
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 33
GLA Batten Luminaire
IP20 120V/60Hz
Technical Specification
Application: Accommodation areas.
Approvals: CSA C22.2 No.250.0-00
Protection: IP20
Housing: Aluzinc sheet steel.
Finish: Epoxy powder coated, white RAL 9016.
Electrics: Flexible wiring, heat resistant to 105°C. Through
wiring up to 15A.
Cable entry: One ½” knockout in each end and back. Type Part Number
Lamp base: G13
1X17W 120V/60Hz GLA 1001
Light source(not included): Fluorescent Lamp: 17/25/32W
T8 with electronic ballast, 20/40W T12 with magnetic ballast. 1X20W 120V/60Hz GLA 1000
Mounting: Direct to bulkhead or deckhead. 1X25W 120V/60Hz GLA 1004
1X32W 120V/60Hz GLA 1003
1X40W 120V/60Hz GLA 1002
Other voltages on request
Spare Parts
Item Description Part No. Item Description Part No.
Ballast 1X17W ; 120V/60Hz ; Electronic 991014 Lampholder 17/20/32/40W ; G13 ; White (4 pcs) 992000
1X20W ; 120V/60Hz ; Magnetic 991018 Lamp 17W/T8 ; Bi-pin ; Cool White 994000
1X25W ;120V/60Hz ; Electronic 991019 20W/T12 ; Bi-pin ; Cool White 994001
1X32W ; 120V/60Hz ; Electronic 991000 25W/T8 ; Bi-pin ; Cool White 994033
1X40W ; 120V/60Hz ; Magnetic 991020 32W/T8 ; Bi-pin ; Cool White 994002
40W/T12 ; Bi-pin ; Cool White 994003
M a riT e a m L ig h tin g In c .
34 A Glamox Company Subject to technical modifications without notice
Berth Light with Adjustable Reflector
1395/1854
Max. On-Off
IP20
277V Switch
Technical Specification
Application: Incandescent or compact fluorescent light for
bunks or as a reading light, etc.
Approvals: UL 1598 & 1598A.
Protection: IP20
Housing: Polycarbonate. Available in brown or white.
Reflector: Adjustable, mat stainless steel, interior epoxy
powder coated, white RAL 9016.
Electrics: Flexible wiring, heat resistant.
Cable entry: Opening on rear side, dia. 12x30mm.
Lamp base: 1395: Medium screw base ; 1854: G23.
Light source(not included): 1395: 40W incandescent,
medium screw base; 1854: 7W compact fluorescent lamp, Type Voltage Part Number
G23 base. 1X7 Watt White 120V/60Hz 1854102
Mounting: Direct to bulkhead.
Compact Dark Brown 120V/60Hz 1854100
Remarks: Supplied with integral On-Off switch.
1X40 Watt White Max. 277V 1395102
Incandescent Dark Brown Max. 277V 1395002
Other voltages on request
1395 1854
Spare Parts
Item Description Part No. Item Description Part No.
Lampholder Snap-on lampholder base (1854) (4 pcs) 992009 Switch Double pole 995005
G23 Fluorescent (1854) (4 pcs) 992010 Ballast Ballast 7W ; 120V/60Hz 991008
Medium screw base (1395) (4 pcs) 992011 Lamp 40W ; Incandescent (1395) 994008
7W ; G23 ; Compact Fluorescent (1854) 994007
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 35
CASA MARINE Recessed Downlight, Fluorescent
Dimmable
IP22 120V/60Hz
1-10V
Insulated
Ceiling
Technical Specification
Application: Interior recessed downlight for use in insulated
ceilings or uninsulated ceilings.
Approvals: UL1598 and 1598A for insulated ceiling
applications
Housing: Aluzinc sheet steel, deep drawn.
Finish: Epoxy powder coated, white.
Electrics: Flexible wiring, heat resistant to 105°C.
Reflector: Silver cone standard, others available on
request.
Cable entry: Two ½” entries, one blind plugs.
Lamp base: 13W, GX23 or 18W GX24-q2
Light source(not included): Compact fluorescent lamp;
available in 13W or 18W.
Mounting: Secured to ceiling with screws in flange. Weight
Acrylic Diffuser Baffle
distribution panel available on request.
Dimming: Optional 18W dimmable fitting requires a remote
dimming ballast (BX0002) and a 1-10V dimmer. Max.
distance between BX0002 and Casa Marine is 2 feet.
Trim ring: See table for ordering information. Please order
trim rings separately.
M a riT e a m L ig h tin g In c .
36 A Glamox Company Subject to technical modifications without notice
Recessed Downlight, Fluorescent
CASA MARINE
Spare Parts
Item Description Part No. Item Description Part No.
Ballast 1X13W ; 120V/60Hz ; Magnetic 991021 Lampholder 13W , GX23 ; White (4 pcs) 992012
1X18W ; 120V/60Hz ; Electronic 991022 18W , G24q-2 ; White (4 pcs) 992013
1X18W ; 120-277V/50-60Hz Lamp 13W double Biax ; 2 pin ; Gx23 base 994009
Dimmable (BX0002) 991023 18W double Biax ; 4 pin ; G24q-2 base 994010
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 37
GCN 14 Recessed Downlight, Fluorescent
Dimmable
IP20 120V/60Hz
1-10V
Insulated
Ceiling
Technical Specification
Application: Interior recessed downlight for use in insulated
ceilings or uninsulated ceilings.
Approvals: UL 1598 and 1598A for insulated ceiling
applications
Housing: Aluzinc sheet steel, deep drawn.
Finish: Epoxy powder coated, white RAL 9016.
Reflector: Silver (S) or Gold (G) aluminum plated.
Electrics: Flexible wiring, heat resistant to 105°C. Gold Reflector
Cable entry: Two ½” entries, one blind plugs.
Lamp base: 13W, GX23 or 18W, GX24-q2.
Light source(not included): Compact fluorescent lamp;
available in 13W or 18W.
Mounting: Secured to ceiling with screws in flange. Weight
distribution panel available on request.
Dimming: Optional 18W dimmable fitting requires a remote
dimming ballast (BX0002) and a 1-10V dimmer. Max.
distance between BX0002 and GCN is two feet.
Trim ring: See table for ordering information. Please order
trim rings separately.
Silver Reflector
Spare Parts
Item Description Part No.
Ballast 1X13W ; 120V/60Hz ; Magnetic 991021
1X18W ; 120V/60Hz ; Electronic 991022
1X18W ; 120-277V/50-60Hz ; Dimmable (BX0002) 991023
Lampholder 13W , GX23 ; White (4 pcs) 992012
6 18W , G24q-2 ; White (4 pcs) 992013
Lamp 13W double Biax ; 2 pin ; Gx23 base 994009
18W double Biax ; 4 pin ; G24q-2 base 994010
M a r iT e a m L i g h t i n g I n c .
38 A Glamox Company Subject to technical modifications without notice
Recessed Downlight, Fluorescent
GCN 14
Trim Rings
Type Color Part Number Type Color Part Number
Standard fascia Gold 0802990001 Fascia with Gold 0802990016
without lens Silver 0802990002 red lens Silver 0802990017
White 0802990003 IP44 White 0802990018
Fascia with Gold 0802990004 Fascia with Gold 0802990019
clear lens Silver 0802990005 curved clear lens Silver 0802990020
IP44 White 0802990006 IP44 White 0802990021
Fascia with Gold 0802990007 Fascia with Gold 0802990022
opal lens Silver 0802990008 curved opal lens Silver 0802990023
IP44 White 0802990009 IP44 White 0802990024
Fascia with Gold 0802990010 Fascia with Gold 0802990025
ice crystal lens Silver 0802990011 glass décor small Silver 0802990026
IP44 White 0802990012 White 0802990027
Fascia with Gold 0802990013 Fascia with Gold 0802990028
frosted lens Silver 0802990014 louver Silver 0802990029
IP44 White 0802990015 White 0802990030
Please order separately
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 39
DL100 B0 Recessed Downlight, Halogen
12V
IP20 Halogen
120V
Technical Specification
Application: Interior recessed downlight.
Approvals: UL 1598 & 1598A for insulated ceiling
applications.
Housing: Steel, deep drawn, seamless c/w aluzinc sheet
steel connection box.
Electrics: Flexible wiring, heat resistant to 250°C.
Cable entry: Two ½” entries, one blind plug.
Lamp base: GU 5.3 for 50W/12V version, GZ 10 for
50W/120V version.
Light source(not included): 50W/12V or 50W/120V
halogen lamp.
Mounting: Secured to ceiling with screws in flange.
Trim ring: See table for ordering information. Please order
trim rings separately.
M a r iT e a m L i g h ti n g I n c .
40 A Glamox Company Subject to technical modifications without notice
Recessed Downlight, Halogen
DL100 B0
Type Part Number
50W max. GZ10 120V/60Hz
Straight Downlight 0701001000
50W max. GZ10 120V/60Hz
Fixed 30 degree Downlight 0701001001
50W max. GU5.3 120V/60Hz ; Integral transformer
Straight Downlight 0701002000
50W max. GU5.3 120V/60Hz ; Integral transformer
Fixed 30 degree Downlight 0701002001
Other voltages on request
Spare Parts
Item Description Part No. Item Description Part No.
Transformer 120/12V ; ET-60 ; Electronic 995006 Lamp 50W halogen ; GU 5.3 ; 12V ; Cool Beam 994013
Lampholder Halogen GU 5.3 (4 pcs) 992014 50W halogen ; GU 5.3 ; 12V ; Alu. Reflector 994014
Halogen GZ 10 (4 pcs) 992015 50W halogen ; GZ 10 ; 120V ; Cool Beam 994015
50W halogen ; GZ 10 ; 120V ; Alu. Reflector 994016
M a r iT e a m L i g h ti n g I n c .
A Glamox Company Subject to technical modifications without notice 41
GFI Illuminated Sign, Surface
Compact
IP44 120V/60Hz
Design
Technical Specification
Application: Interior surface mounted illuminated sign.
Approvals: UL 1598 & 1598A and UL 924. Sign as per
USCG requirements.
Protection: IP44
Housing: Extruded aluminum frame with injection molded
gray plastic corners.
Finish: Epoxy powder coated, white RAL 9016.
Sign: Polycarbonate plate, 2 in. high red letters with a white
background. All relevant signs are available, please order
separately.
Electrics: Flexible wiring, heat resistant to 105°C.
Cable entry: One PG 16 cable gland included.
Lamp base: G5 (8W) or G13 (17W)
Light source(not included): Fluorescent lamp: 8W/T5 or
17W/T8.
Mounting: Directly to bulkhead or deckhead.
Spare Parts
Item Description Part No. Item Description Part No.
Ballast 1X8W ;120V/60Hz ; Magnetic 991046 Lamp 8W/T5 ; Min. bi-pin ; Cool White 994004
1X17W ; 120V/60Hz ; Electronic 991024 17W/T8 ; Bi-pin ; Cool White 994000
Lampholder 8W ; G5 ; White (4 pcs) 992016 Starter 1X8W ; FS-5 (2 pcs) 995002
17W ; G13 ; White (4 pcs) 992001
M a riT e a m L ig h tin g In c .
42 A Glamox Company Subject to technical modifications without notice
Illuminated Sign, Surface
GFI
SIGN GFI 9X34 GFI 9X62 Decsription
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 43
0633 Illuminated Sign, Recessed
Compact
IP20 120V/60Hz
Design
Technical Specification
Application: Interior recessed mounted illuminated sign.
Approvals: UL 1598 & 1598A and UL 924 approved. Sign
as per USCG requirements.
Housing: Aluzinc sheet steel or stainless steel.
Finish: Epoxy powder coated, white RAL 9016.
Sign: Polycarbonate, 2 in. high red letters with a white
background, single sided or double sided. All relevant signs
are available, please order separately.
Electrics: Flexible wiring, heat resistant to 105°C.
Cable entry: Two ½” knockouts in each end.
Lamp base: G5
Light source(not included): Fluorescent lamp: 8W/T5.
Mounting: Recessed in ceiling or bulkhead.
M a riT e a m L ig h tin g In c .
44 A Glamox Company Subject to technical modifications without notice
Illuminated Sign, Recessed
0633
SIGN Single Sided Double Sided Description
Spare Parts
Item Description Part No. Item Description Part No.
Ballast 1X8W ; 120V/60Hz ; Magnetic 991005 Lamp 8W/T5 ; Min. bi-pin ; Cool White 994004
Lampholder 8W ; G5 ; White (4 pcs) 992002 Starter 1X8W ; FS-5 (2 pcs) 995002
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 45
GXPN Hazardous Area Luminaire, Surface
Battery 120V/60Hz
IP67
Backup 120-277V/50-60Hz
M a riT e a m L ig h tin g In c .
46 A Glamox Company Subject to technical modifications without notice
Hazardous Area Luminaire, Surface
GXPN
Without battery backup With 90 minute battery backup
Voltage Universal Voltage Voltage Universal Voltage
Type 120V/60Hz - HPF 120-277V/50-60Hz 120V/60Hz - HPF 120-277V/50-60Hz
2X17 Watt GXPN 2000 GXPN 2026 GXPN 2004 GXPN 2028
2X17 Watt - Stainless Steel GXPN 2019 GXPN 2030 GXPN 2023 GXPN 2032
2X20 Watt GXPN 2001 - GXPN 2005 -
2X20 Watt - Stainless Steel GXPN 2020 - GXPN 2024 -
2X32 Watt GXPN 2002 GXPN 2027 GXPN 2006 GXPN 2029
2X32 Watt - Stainless Steel GXPN 2021 GXPN 2031 GXPN 2025 GXPN 2033
2X40 Watt GXPN 2003 - GXPN 2007 -
2X40 Watt - Stainless Steel GXPN 2022 - GXPN 2018 -
Other voltages on request
Spare Parts
Item Description Part No. Item Description Part No.
Ballast 2X17/32W ; 120V/60Hz ; Electronic 991000 Lampholder 17/20/32/40W; G13 ; White (4 pcs) 992000
2X20W ;120V/60Hz ; Magnetic 991001 Diffuser 2X17/20W; Clear Polycarbonate 993000
2X40W ;120V/60Hz ; Magnetic 991002 2X32/40W; Clear Polycarbonate 993001
2X17/32W ; 120-277V/50-60Hz ; Electronic 991003 Battery Battery backup unit ; 90 minute ; 120V 991025
Lamp 17W/T8; Bi-pin; Cool White 994000 Battery backup unit ; 90 minute ; 120-277V 991037
20W/T12; Bi-pin; Cool White 994001 Conduit Hub 1/2" Zinc (2 pcs) 995007
32W/T8; Bi-pin; Cool White 994002 Blind Plug PG 16 Brass (2 pcs) 995008
40W/T12; Bi-pin; Cool White 994003 Lens Clip Stainless Steel; (4 pcs) 995047
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 47
1833 Explosion Proof Luminaire
Battery 120V/60Hz
IP67
Backup 120-277V/50-60Hz
Technical Specification
Application: Hazardous areas, Class I, Division 1 and
Class 1 Zone 1.
Approvals: CSA approved Class I, Division 1, Groups C &
D. Flame proof housing for supreme safety.
Protection: IP67
Housing: Corrosion resistant light weight aluminum alloy.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: Clear polycarbonate.
Electrics: Flexible wiring, heat resistant to 105°C. All
electric’s installed on a fully removable gear tray.
Cable entry: Integral junction box with two ¾” NPT entries.
Lamp base: G13, spring loaded (17/32W only).
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast, 20/40W T12 with magnetic ballast.
Battery backup: Optional 90 minute battery backup. 500-
600 lumens for 90 minutes at 20°C.
Mounting: Stainless steel mounting brackets.
Features: Removable gear tray allows for quick and easy Spare Parts
maintenance. Fixture can be converted to an “emergency” Item Description Part No.
fixture by simply replacing the “normal” gear tray with an Ballast 2X17/32W; 120V/60Hz; Electronic 991000
“emergency” gear tray.
2X17/32W; 120-277V/50-60Hz; Electronic 991003
2X20W; 120V/60Hz; Magnetic 991001
2X40W; 120V/60Hz; Magnetic 991002
Battery Battery backup unit; 90 minute; 120V 991004
Battery backup unit; 90 minute; 120-277V 991036
Lampholder 17/32W; G13; White; Spring Loaded (4 pcs) 992003
17/32W; G13; White; Stationary (4 pcs) 992004
20/40W; G13; White (4 pcs) 992001
Lamp 17W/T8; Bi-pin; Cool White 994000
20W/T12; Bi-pin; Cool White 994001
32W/T8; Bi-pin; Cool White 994002
40W/T12; Bi-pin; Cool White 994003
M a riT e a m L ig h tin g In c .
48 A Glamox Company Subject to technical modifications without notice
Hazardous Area Luminaire, Recessed
GXPR
Battery 120V/60Hz
IP54
Backup 120-277V/50-60Hz
Technical Specification
Application: Hazardous areas; Class 1 Division 2 and
Class 1 Zone 2.
Approvals: Class I, Division 2, Groups A, B, C, D. UL 844,
UL 924, and CSA C22.2 No. 137-M1981.
Protection: IP54
Housing: Aluzinc sheet steel.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: Clear polycarbonate and clear prismatic diffuser.
Electrics: Flexible wiring, heat resistant to 105°C; through
wiring up to 15 A.
Cable entry: One ½” conduit hub and one blind plug at each
end.
Lamp base: G13
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast, 20/40W T12 with magnetic ballast.
Battery backup: Optional 90 minute battery backup. 500-
600 lumens for 90 minutes at 20°C. Other configurations
available upon request.
Charge time after full discharge: 24 hours.
Mounting: Designed for recessed parallel mounting in a
linear interlocking ceiling system ( Dampa, Dana Acoustic,
BIP, etc.).
Spare Parts
Item Description Part No. Item Description Part No.
Ballast 2X17/32W ;120V/60Hz ; Electronic 991000 Lampholder 17/20/32/40W ; G13 ; White (4 pcs) 992000
2X20W ;120V/60Hz ; Magnetic 991001 Lamp 17W/T8 ; Bi-pin ; Cool White 994000
2X40W ;120V/60Hz ; Magnetic 991002 20W/T12 ; Bi-pin ; Cool White 994001
2X17/32W ;120-277V/50-60Hz ; Electronic 991003 32W/T8 ; Bi-pin ; Cool White 994002
Battery Battery backup unit; 90 minute; 120V 991025 40W/T12 ; Bi-pin ; Cool White 994003
Battery backup unit; 90 minute; 120-277V 991037 Diffuser 2X17/20W 993079
Conduit Hub 1/2" Zinc (2 pcs) 995007 (including frame) 2X32/40W 993080
Blind Plug PG16 Brass(2 pcs) 995008
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 49
MAX Class 1, Zone 1, Luminaire, Surface
Battery
IP67 120V/60Hz
Backup
Technical Specification
Application: Hazardous areas: decks, process areas,
machinery spaces, etc. Class 1 Zone 1 & 2 areas.
Without Battery Backup
Approvals: CSA approved Class 1, Zone 1
Ex edm IIC – T5 (T4 with battery backup).
Protection: IP67
Housing: Aluzinc sheet steel or stainless steel, deep drawn,
seamless.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: Clear polycarbonate.
Electrics: Flexible wiring, heat resistant to 105°C; through
wiring up to 15A.
Cable entry: M20, M25 or PG16. One or two entries per
end. Please specify when ordering.
Lamp base: G13.
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast.
Battery backup: Optional 1.5 hour or 3.0 hour battery W ith Battery Backup
backup. Suitable for use in an ambient temperature up to
45°C.
Mounting: 2 brackets for direct mounting to bulkhead or
deckhead. Custom mounting brackets are also available.
Spare Parts
Item Description Part No. Item Description Part No.
Lampholder 17/32W; Exe; Brown (2 pcs) 992022 Ballast 2X17W; 1X32W; 120V/60Hz 991041
17/32W; Exe; Blue (2 pcs) 992023 2X32W; 120V/60Hz 991044
Lamp 17W/T8; Bi-pin; Cool White 994000 Emergency 1.5 Hour; 2X17W; 1X32W; 120V/60Hz 991042
32W/T8; Bi-pin; Cool White 994002 Ballast 3.0 Hour; 2X17W; 1X32W; 120V/60Hz 991043
Lens Clip Stainless Steel (2 pcs) 995043 Battery 1.5 Hour 995045
Diffuser 2X17W; Clear Polycarbonate 993084 3.0 Hour 995046
2X32W; Clear Polycarbonate 993084
M a riT e a m L ig h tin g In c .
50 A Glamox Company Subject to technical modifications without notice
Class 1, Zone 1, Luminaire, Surface
MAX
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 51
1069 028-031 Floodlight, 250/400W HPS/MH, Integral Ballast
HPS/MH
IP67 120-277V
Max. 400W
Technical Specification
Application: Fully self-contained high pressure sodium or
metal halide floodlight for hazardous areas; Class 1 Div. 2
and Zone 2.
Approvals: Class I, Division 2, Groups A, B, C, D, UL 844.
Protection: IP67
Housing: Stainless steel, deep drawn, seamless.
Finish: Epoxy powder coated, white RAL 9016. Not exactly as shown
Lens: Easy to change safety glass, no tools required for
relamping.
Reflector: Highly polished aluminum, anodized. Available in
wide beam(50 degrees) or narrow beam(26 degrees).
Electrics: Flexible wiring, heat resistant.
Cable entry: External junction box with one ¾” conduit hub.
Lamp base: E39 mogul screw base.
Light source(not included): High pressure sodium or metal
halide, 250W or 400W.
Mounting: Two adjustable stainless steel brackets with two
mounting holes each, diameter ½”(14mm).
Remarks: Integral ballast and ignitor included.
Part Number
Type Voltage Reflector HPS MH
Floodlight 250W 120/277V AC Narrow Beam 1069028 1069028MH
Floodlight 250W 120/277V AC Wide Beam 1069029 1069029MH
Floodlight 400W 120/208/240/277V AC Narrow Beam 1069030 1069030MH
Floodlight 400W 120/208/240/277V AC Wide Beam 1069031 1069031MH
Lamp, 250W, Mogul base, Tubular - - 994025 994032
Lamp, 400W, Mogul base, Tubular - - 994026 994034
Lamps have to be ordered separately
Other voltages on request
Spare Parts
Item Description Part No. Item Description Part No.
Lampholder Mogul screw base 992020 Ballast 250W HPS ; 120/277V 991026
Reflector Narrow Beam 993061 400W HPS ; 120/208/240/277V 991027
Wide Beam 993062 250W MH ; 120/277V 991038
Lens Safety glass c/w frame 993063 400W MH ; 120/208/240/277V 991039
Ignitor 250/400W HPS 995015 Capacitor 35 Mfd (250W HPS) 995018
Mounting bracket Stainless Steel (2 pcs) 995020 55 Mfd (400W HPS) 995019
Lens clamp Stainless Steel (5 pcs) 995021 15 Mfd (250W MH) 995037
24 Mfd (400W MH) 995038
M a riT e a m L ig h tin g In c .
52 A Glamox Company Subject to technical modifications without notice
Class 1, Div. 2, HPS, Cargo Light
1023
120V HPS
IP67
440V Max. 100W
Technical Specification
Application: High pressure sodium (HPS) lighting fixture
specially designed for cargo holds carrying explosive
products.
Approvals: Class I, Division 2, Groups A, B, C, D, UL 844.
Protection: IP67 Type Voltage Part Number
Housing: Stainless steel, deep drawn, seamless.
Finish: Epoxy powder coated, white RAL 9016. Cargo Light 50W 120V AC 1023444
Diffuser: Easy to change clear crystal pattern Cargo Light 70W 120V AC 1023443
polycarbonate, no tools required for relamping. Cargo Light 70W 440V AC 1023441
Reflector: White epoxy powder coated.
Cargo Light 100W 120V AC 1023442
Electrics: Flexible wiring, heat resistant.
Cable entry: Two ¾” stainless steel conduit hubs. Cargo Light 100W 440V AC 1023440
Lamp base: E39 mogul screw base. Lamp, HPS, 50W, Mogul Base E23.5 - 994028
Light source(not included): High pressure sodium, 50W,
Lamp, HPS, 70W, Mogul Base E23.5 - 994029
70W, or 100W.
Mounting: Two welded brackets with two mounting holes Lamp, HPS, 100W, Mogul Base E23.5 - 994030
each, diameter 23/64”(9.128mm). Lamps have to be ordered separately
Remarks: Integral ballast and ignitor included. Other voltages on request
Spare Parts
Item Description Part No. Item Description Part No.
Lampholder Mogul screw base 992020 Capacitor 36 Mfd ; 100W HPS 995024
Diffuser Polycarbonate 993066 28 Mfd ; 70W HPS 995025
Ballast 50W HPS ; 120V/60Hz 991028 20 Mfd ; 50W HPS 995026
70W HPS ; 120V/60Hz 991029 Ignitor 100/70/50W HPS 995027
100W HPS ; 120V/60Hz 991030 Lens clamp Stainless Steel (5 pcs) 995028
100W HPS ; 440V/60Hz 991031
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 53
1076 060 Floodlight, 200W Halogen
Max. Halogen
IP67
220V Max. 200W
Technical Specification
Application: Yachts, fishing vessels, commercial shipping
and industrial areas.
Design: According to rules of maritime classification
societies, additional VDE and IEC/EN.
Protection: IP67
Housing: Stainless steel, deep drawn, seamless.
Finish: Epoxy powder coated, white RAL 9016.
Lens: Easy to change safety glass, no tools required for
relamping. Type Voltage Part Number
Reflector: Highly polished aluminum, anodized Floodlight max. 200W max. 250V 1076060
(36 degrees).
Lamp, 100W, R7s base 12V 994017
Electrics: Flexible wiring, heat resistant.
Cable entry: Brass cable gland M18x1.5. Lamp, 200W, R7s base 24V 994018
Lamp base: R7s (RSC), adjustable for lamp length 2 5/16 Lamp, 200W, R7s base 120V 994019
in. to 4 11/16 in.
Lamp, 200W, R7s base 220V 994020
Light source(not included): Double ended halogen lamp
200W max. Lamps have to be ordered separately
Mounting: Adjustable stainless steel bracket with central Other voltages on request
mounting hole dia. ½”(14mm).
Spare Parts
Item Description Part No. Item Description Part No.
Lampholder R7s Halogen (2 pcs) 992017 Mounting bracket Stainless Steel c/w hardware 995011
Reflector Highly polished aluminum 993054 Lens clamp Stainless Steel (3 pcs) 995012
Lens Safety glass c/w frame 993055
Cable Gland M18 x 1.5 Brass (2 pcs) 995009
M a riT e a m L ig h tin g In c .
54 A Glamox Company Subject to technical modifications without notice
Floodlight, 500W Halogen
1069 040
Max. Halogen
IP67
220V Max. 500W
Technical Specification
Application: Decks, mast, cargo, etc.
Approvals: UL 1598 & 1598A, USCG accepted.
Protection: IP67
Housing: Stainless steel, deep drawn, seamless.
Finish: Epoxy powder coated, white RAL 9016.
Lens: Easy to change safety glass, no tools required for
relamping.
Reflector: Highly polished aluminum, anodized, wide beam
(34 degrees).
Electrics: Flexible wiring, heat resistant to 250°C. Type Voltage Part Number
Cable entry: External junction box with one watertight brass Floodlight max. 500W max. 220V 1069040
M24x1.5 cable gland. Lamp, 500W, R7s base 120V AC 994021
Lamp base: R7s (RSC)
Light source(not included): Double ended Halogen lamp Lamp, 500W, R7s base 220V AC 994022
L = 4 11/16”, 500W max. Lamps have to be ordered separately
Mounting: Adjustable stainless steel mounting bracket with Other voltages on request
four mounting holes.
Spare Parts
Item Description Part No. Item Description Part No.
Lampholder R7s Halogen (2 pcs) 992018 Mounting bracket Stainless Steel 995013
Reflector Highly polished aluminum 993056 Lens clamp Stainless Steel (5 pcs) 995014
Lens Safety glass c/w frame 993057 Junction Box Junction Box/Gland/Terminal Strip 995041
Cable Gland M24 x 1.5 Brass (2 pcs) 995010
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 55
1069 012/015/016/017 Floodlight, 1000W Halogen
Max. Halogen
IP67
220V Max. 1000W
Technical Specification
Application: Decks, mast, cargo, etc.
Approvals: UL 1598 & 1598A, USCG accepted.
Protection: IP67
Housing: Stainless steel, deep drawn, seamless.
Finish: Epoxy powder coated, white RAL 9016.
Lens: Easy to change safety glass, no tools required for
relamping.
Reflector: Highly polished aluminum, anodized. Available in
wide beam(34 degrees) or narrow beam(12 degrees).
Electrics: Flexible wiring, heat resistant to 250°C.
Cable entry: External junction box with one watertight brass
M24x1.5 cable gland.
Lamp base: R7s (RSC)
Light source(not included): Double ended Halogen lamp;
120V: L=7 1/2”, 220V: L=10 1/16”; 1000W max.
Mounting: Adjustable stainless steel mounting bracket with
four mounting holes.
Spare Parts
Item Description Part No. Item Description Part No.
Lampholder R7s Halogen (2 pcs) 992019 Cable Gland M24 x 1.5 Brass (2 pcs) 995010
Reflector Narrow Beam 993058 Mounting bracket Stainless Steel 995016
Wide Beam 993059 Lens clamp Stainless Steel (5 pcs) 995017
Lens Safety glass c/w frame 993060 Junction Box Junction Box/Gland/Terminal Strip 995041
M a r iT e a m L i g h t i n g I n c .
56 A Glamox Company Subject to technical modifications without notice
Floodlight, 250/400W HPS/MH, Separate Ballast
1069 008/009
HPS/MH
IP67
Max. 400W
Technical Specification
Application: Decks, mast, cargo, etc.
Approvals: UL 1598 & 1598A, USCG accepted.
Protection: IP67
Housing: Stainless steel, deep drawn, seamless.
Finish: Epoxy powder coated, white RAL 9016.
Lens: Easy to change safety glass, no tools required for
relamping.
Reflector: Highly polished aluminum, anodized. Available in
wide beam(50 degrees) or narrow beam(26 degrees).
Electrics: Flexible wiring, heat resistant.
Cable entry: External junction box with ignition unit and one
watertight brass M24x1.5 cable gland.
Lamp base: E39 mogul screw base.
Light source(not included): High pressure sodium or metal
halide, 250W or 400W.
Mounting: Adjustable stainless steel mounting bracket with
four mounting holes.
Remarks: External ballast unit “1513” series required. Must
be ordered separately.
Part Number
Type Ballast Unit Reflector HPS MH
Floodlight 250W/400W "1513" Series Narrow Beam 1069008 1069008MH
Floodlight 250W/400W "1513" Series Wide Beam 1069009 1069009MH
Lamp, 250W, Mogul base, Tubular - - 994025 994032
Lamp, 400W, Mogul base, Tubular - - 994026 994034
Lamps and ballast units have to be ordered separately
Spare Parts
Item Description Part No. Item Description Part No.
Lampholder Mogul screw base 992020 Cable Gland M24 x 1.5 Brass 995010
Reflector Narrow Beam 993061 Mounting bracket Stainless Steel 995016
Wide Beam 993062 Lens clamp Stainless Steel (5 pcs) 995017
Ignitor 250/400W HPS 995015
Lens Safety glass c/w frame 993060
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 57
1069 018-021 Floodlight, 250/400W HPS/MH, Integral Ballast
HPS/MH
IP67 120-277V
Max. 400W
Technical Specification
Application: Fully self-contained high pressure sodium or
metal halide floodlight for decks, mast, cargo, etc.
Approvals: UL 1598 & 1598A, USCG accepted.
Protection: IP67
Housing: Stainless steel, deep drawn, seamless.
Finish: Epoxy powder coated, white RAL 9016.
Lens: Easy to change safety glass, no tools required for
relamping.
Reflector: Highly polished aluminum, anodized. Available in
wide beam(50 degrees) or narrow beam(26 degrees).
Electrics: Flexible wiring, heat resistant. Not exactly as shown
Cable entry: External junction box with one watertight brass
M24x1.5 cable gland.
Lamp base: E39 mogul screw base.
Light source(not included): High pressure sodium or metal
halide, 250W or 400W.
Mounting: Two adjustable stainless steel brackets with two
mounting holes each, diameter ½”(14mm).
Remarks: Integral ballast and ignitor included.
Part N umber
T y pe Voltage R eflector H PS MH
F loodlight 250W 120/277V AC N arrow Beam 1069018 1069018M H
F loodlight 250W 120/277V AC Wide Beam 1069019 1069019M H
F loodlight 400W 120/208/240/277V AC N arrow Beam 1069020 1069020M H
F loodlight 400W 120/208/240/277V AC Wide Beam 1069021 1069021M H
Lamp, 250W, M ogul base, T ubular - - 994025 994032
Lamp, 400W, M ogul base, T ubular - - 994026 994034
L amp s h ave to b e o rd ered sep arately
Other v oltages on request
Spare Parts
Item Description Part No. Item Description Part No.
Lampholder Mogul screw base 992020 Ballast 250W HPS ; 120/277V 991026
Reflector Narrow Beam 993061 400W HPS ; 120/208/240/277V 991027
Wide Beam 993062 250W MH ; 120/277V 991038
Lens Safety glass c/w frame 993063 400W MH ; 120/208/240/277V 991039
Ignitor 250/400W HPS 995015 Capacitor 35 Mfd (250W HPS) 995018
Cable Gland M24 x 1.5 Brass (2 pcs) 995010 55 Mfd (400W HPS) 995019
Mounting bracket Stainless Steel (2 pcs) 995020 15 Mfd (250W MH) 995037
Lens clamp Stainless Steel (5 pcs) 995021 24 Mfd (400W MH) 995038
M a riT e a m L ig h tin g In c .
58 A Glamox Company Subject to technical modifications without notice
Floodlight, 1000W HPS, Separate Ballast
1069 013/023
HPS
IP67
1000W
Technical Specification
Application: Decks, mast, cargo, etc.
Approvals: UL 1598 & 1598A, USCG accepted.
Protection: IP67
Housing: Stainless steel, deep drawn, seamless.
Finish: Epoxy powder coated, white RAL 9016.
Lens: Easy to change safety glass, no tools required for
relamping.
Reflector: Highly polished aluminum, anodized, narrow
beam(7 degrees).
Electrics: Flexible wiring, heat resistant.
Cable entry: External junction box with one watertight brass Type Ballast Unit Part Number
M24x1.5 cable gland. Floodlight 1000W "1513" Series 1069013
Lamp base: E39 mogul screw base.
Floodlight 1000W Indoor Remote 1069023
Light source(not included): High pressure sodium,
1000W. Lamp, HPS, 1000W, Mogul base, Tubular - 994027
Mounting: Two adjustable stainless steel brackets with two Lamps have to be ordered separately
mounting holes each, diameter ½”(14mm).
Remarks: External Ballast unit 1513 series or an indoor
remote ballast unit is required. Must be ordered separately.
Spare Parts
Item Description Part No. Item Description Part No.
Lampholder Mogul screw base 992021 Cable Gland M24 x 1.5 Brass (2 pcs) 995010
Reflector High polished aluminum 993064 Mounting bracket Stainless steel (2 pcs) 995020
Ignitor 1000W HPS 995022 Lens clamp Stainless steel (5 pcs) 995023
Lens Safety glass c/w frame 993065
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 59
1513 Series Floodlight Ballast Unit
HPS/MH
IP67 120-277V
Max. 1000W
Technical Specification
Application: Ballast units for high pressure sodium (HPS)
or metal halide (MH) floodlights, 1069 series.
Approvals: UL 1598 & 1598A, USCG accepted.
Protection: IP67
Housing: Stainless steel, deep drawn, seamless.
Finish: Epoxy powder coated, white RAL 9016.
Electrics: Flexible wiring, heat resistant.
Cable entry: Two watertight brass M24x1.5 cable glands
at one end. Type Voltage Part Number
Mounting: Two welded brackets with two mounting holes Ballast Unit 250W HPS 120/208/240/277V AC 1513002
each, diameter 13/32”(10.5mm). Ballast Unit 400W HPS 120/208/240/277V AC 1513004
Remarks: Floodlights must be ordered separately, 1069
series. Ballast Unit 1000W HPS 120/208/240/277V AC 1513007
Ballast Unit 250W MH 120/277V AC 1513010
Ballast Unit 400W MH 120/208/240/277V AC 1513011
Spare parts
Item Description Part No. Item Description Part No.
Ballast 250W HPS ; 120/208/240/277V 991026 Cover clamp Stainless Steel (5 pcs) 995030
400W HPS ; 120/208/240/277V 991027 Capacitor 35 Mfd ; 250W HPS 995018
1000W HPS ; 120/208/240/277V 991032 55 Mfd ; 400W HPS 995019
250W MH ; 120/277V 991038 26 Mfd ; 1000W HPS 995029
400W MH ; 120/208/240/277V 991039 15 Mfd ; 250W MH 995037
Cable gland M24 x 1.5 Brass (2 pcs) 995010 24 Mfd ; 400W MH 995038
M a r iT e a m L i g h t i n g I n c .
60 A Glamox Company Subject to technical modifications without notice
Deck Light, 50/80W Sealed Beam
DSB - 1
Water 12V Sealed Beam
Tight 24V 50/80W
Technical Specification
Deck Light DSB-1 is produced in cast MS and is painted
with plastic laquer. The DSB-1 is watertight and corrosion
resistant. Supplied with bracket for vertical and horizontal
turning of the light.
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 61
Control Panel Navigation Lighting
24V/120V/220V
50/60 Hz
Technical Specification
Application: Custom built control panel to switch, protect
and monitor navigation and signalling lights.
Construction: Consist of a front plate with switches,
indicators and a casing fitted to the front plate. Inside the
casing there is the electronic detector and the internal
voltage processor. The light circuits are fed via serial
terminals located inside the casing. The terminals are
numbered. The connecting scheme can be seen from the
individually supplied terminal plan.
Features:
- Dimmable control LED’s indicate each navigation and
signalling light.
- Master switch for switching between primary and
secondary supply.
- Detector unit provides continuous monitoring of light
circuits. If a lamp circuit is defective the LED will flash &
an audible alarm will sound. Manual reset button
provided.
- On/off switch light for every light, toggle switch for
double lens navigation lights.
- Available for 24Vdc, 120Vac and 220Vac, 50/60Hz.
- Face plate engraved to customers requirements.(i.e.
ships mimic, switch layout, etc.)
M a r i T e a m L ig h t i n g I n c .
62 A Glamox Company Subject to technical modifications without notice
Navigation Lighting
Control Panel
Aqua Signal navigation light monitor panels
All panels as per customer’s specification related to
the respective ship. Engravings in the front plate as
per customer’s requirements.
3425201: 15 - way panel, double pole, melting fuse 3425202: as 3425201, main and spare part lights, 15 + 15,
type G are monitored by the same system, with special switch
over arrangements
3435201: 12 - way panel, double pole, circuit breaker 3435202: as 3435201, main and spare part lights, 12 + 12,
reacting thermally and magnetically are monitored by the same system, with special switch
over arrangements
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 63
Control Panel Navigation Lighting
24 VDC
115/230 VAC
Options
• Secondary panel
• Catamaran hull mimic
• Auto mode functions for <<AT SEA>> and <<AT
ANCHOR>>
• Auto mode functions for trawlers , <<SHOOT>>,
<<HAUL>>, and <<FAST>>
M a riT e a m L ig h tin g In c .
64 A Glamox Company Subject to technical modifications without notice
Navigation Lighting
Control Panel
Technical Data
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 65
Series 55 Navigation Light
12V 32V
IP56
24V 120V
Technical Specification
Application: Single lens navigation light for all vessels over
65.6 ft (20m) but less than 164 ft (50m) in length.
Approvals: USCG accepted. UL1104 & UL 1598 & 1598A
approved.
Housing: Black polycarbonate, glass fibre reinforced.
Housing corrosion resistant, self-ventilated, non-magnetic,
seawater resistant.
Optics: Easy to change, seawater resistant, special plastic
fresnel lens.
Electrics: Supplied with 1.5m special connection cable
2x1.5mm2, self-protective insulation, class II.
Cable entry: Special cable gland, metric pressure screw
PG13.5 with protection against buckling.
Lamp base: Special lampholder for P15d bayonet type
lamps.
Light source( included): In order to comply with USCG
regulations you must use Aqua Signal lamps. Available in
25W in 12V, 24V, 32V, & 120V.
Mounting: Base Flange attachment with 4 screws (not
included). Allround lights may also be hoisted when 2
halyard hooks are attached (not included). Additional
mounting aids available.
Remarks: Watertight access cap for quick relamping.
M a riT e a m L ig h tin g In c .
66 A Glamox Company Subject to technical modifications without notice
Navigation Light
Series 55
Spare Parts
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 67
Series 70 Navigation Light
120V
IP56 24V
220V
Technical Specification
Application: Single lens navigation light for all vessels over
65.6 ft (20m) in length.
Approvals: USCG accepted. UL1104 & UL 1598 & 1598A
approved.
Housing: Black polycarbonate, glass fibre reinforced.
Housing corrosion resistant, self-ventilated, non-magnetic,
seawater resistant.
Optics: Easy to change, seawater resistant, special plastic
fresnel lens.
Electrics: Supplied with 1.5m special connection cable
2x1.5mm2, self-protective insulation, class II.
Cable entry: Special cable gland, metric pressure screw
M24x1.5 with protection against buckling.
Lamp base: Special lampholder for P28 bayonet type
lamps.
Light source(included): In order to comply with USCG
regulations you must use Aqua Signal lamps. Available in
40W/24V, 60W/110V, & 65W/220V.
Mounting: Base Flange attachment with 4 screws (not
included). Allround lights may also be hoisted. Additional
mounting aids available.
Remarks: Watertight access cap for quick relamping.
M a riT e a m L ig h tin g In c .
68 A Glamox Company Subject to technical modifications without notice
Navigation Light
Series 70
Spare Parts
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 69
Series 70M Navigation Light
120V
IP56 24V
220V
Technical Specification
Application: Double lens navigation light for all vessels over
65.6 ft (20m) in length.
Approvals: USCG accepted. UL1104 & UL 1598 & 1598A
approved.
Housing: Black polycarbonate, glass fibre reinforced.
Housing corrosion resistant, self-ventilated, non-magnetic,
seawater resistant.
Optics: Easy to change, seawater resistant, special plastic
fresnel lens.
Electrics: Main lighting (upper unit) and spare lighting
(lower unit) each supplied with 1.5m special connection
cable 2x1.5mm2, self-protective insulation, class II.
Cable entry: Two special cable gland, metric pressure
screw M24x1.5 with protection against buckling.
Lamp base: Special lampholder for P28 bayonet type
lamps.
Light source(included): In order to comply with USCG
regulations you must use Aqua Signal lamps. Available in
40W/24V, 60W/110V, & 65W/220V.
Mounting: Base Flange attachment with 4 screws (not
included). Allround lights may also be hoisted. Additional
mounting aids available.
Remarks: Watertight access cap and break-over design for
quick relamping.
M a riT e a m L ig h tin g In c .
70 A Glamox Company Subject to technical modifications without notice
Navigation Light
Series 70M
Spare Parts
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 71
DM 60 Daylight Signalling Light
120V
230V
Technical Specification
Rules: In accordance with SOLAS and the relevant
national authorities, all passenger vessels exceeding 12
m and vessels of at least 150 tons must carry a type
approved portable daylight signalling lamp. The unit
should be connected to a portable battery under
constant charge ready for use on the bridge and in life
boats. A
A Norselight’s standard daylight signalling lamp is
available in four different versions.
B Cable: a 5 m self curling extendable cable is
included as standard.
FEATURES
M a riT e a m L ig h tin g In c .
72 A Glamox Company Subject to technical modifications without notice
Daylight Signalling Light
DM 60
Technical Data
Spare Parts
Description Part No. Description Part No.
DM60 with 5m cable and plug 1806009 Battery charger, 120V-12V 1806011
Bulb, 12V P30D 1806002 Battery charger, 120V-24V 1806020
Bulb, 24V P30D 1703016 Battery charger, 230V-12V 1806016
Filter, red 1806004 Battery charger, 230V-24V 1806012
Filter, green 1806005 Transformer, 120/12V 1806018
Filter, blue 1806007 Transformer, 120/24V 1806019
Reduction filter 1806006 Transformer, 230/12V 1806013
Battery, 12V 1806015 Transformer, 230/24V 1806029
Plug, 3 pin 1806014 Socket, 3 pin 1806030
Transportation box 1806008 Socket, 3 pin in watertight box 4021340
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 73
Searchlights
M a riT e a m L ig h tin g In c .
74 A Glamox Company Subject to technical modifications without notice
Searchlights
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 75
Searchlight Ordering Information
Direct and Bridge Mounted Models
Part Number
Direct Mounting Bridge Mounting
Version Version Without Version Version
Type Wattage Voltage /D /DH Control Lever /B /BH
SH 200 100W 12V 100100120 - - 100100430 100100735
100W 24V 100100220 - - 100100530 100100835
250W 24V 100100320 - - 100100630 100100935
SH 260 250W 24V 100108120 100108125 100108000 100108030 100108035
SH 310 250W 24V 100110020 100110025 100108300 100108330 100108335
500W 24V 100110120 100110125 100108400 100108430 100108435
650W 230V 100110320 100110325 100108600 100108630 100108635
1000W 24V 100110220 100110225 100108500 100108530 100108535
1000W 115V 100120420 100120425 100128700 100128730 100128735
1000W 230V 100110420 100110425 100108700 100108730 100108735
SH 370 250W 24V 100110520 100110525 100108800 100108830 100108835
500W 24V 100110620 100110625 100108900 100108930 100108935
650W 230V 100110820 100110825 100109100 100109130 100109135
1000W 24V 100110720 100110725 100109000 100109030 100109035
1000W 115V 100120920 100120925 100129200 100129230 100129235
1000W 230V 100110920 100110925 100109200 100109230 100109235
SH 470 250W 24V 100111020 100111025 100109300 100109330 100109335
500W 24V 100111120 100111125 100109400 100109430 100109435
650W 230V 100111320 100111325 100109600 100109630 100109635
1000W 24V 100111220 100111225 100109500 100109530 100109535
1000W 115V 100121420 100121425 100129700 100129730 100129735
1000W 230V 100111420 100111425 100109700 100109730 100109735
2000W 115V 100121520 100121525 100129800 100129830 100129835
2000W 230V 100111520 100111525 100109800 100109830 100109835
XS 500 500W 115V 100221720 100221725 100221800 100221830 100221835
500W 230V 100201720 100201725 100201800 100201830 100201835
XS 1000 1000W 115V 100220020 100220025 100220100 100220130 100220135
1000W 230V 100200020 100200025 100200100 100200130 100200135
XS 1600 1600W 115V 100220520 100220525 100220200 100220230 100220235
1600W 230V 100200520 100200525 100200200 100200230 100200235
M a r iT e a m L i g h t i n g I n c .
76 A Glamox Company Subject to technical modifications without notice
Searchlight Ordering Information
Remote Control Models
Without Electric With Electric
Type Wattage Voltage Focus Focus
SH 260-R10 250W 24V 100105940 100105941
SH 310-R10 250W 24V 100106040 100106041
500W 24V 100106140 100106141
650W 230V 100107040 100107041
1000W 24V 100106240 100106241
1000W 115V 100126940 100126941
1000W 230V 100106940 100106941
SH 370-R10 250W 24V 100106340 100106341
500W 24V 100106440 100106441
650W 230V 100107340 100107341
1000W 24V 100106540 100106541
1000W 115V 100127140 100127141
1000W 230V 100107140 100107141
SH 470-R10 250W 24V 100106640 100106641
500W 24V 100106740 100106741
650W 230V 100107540 100107541
1000W 24V 100106840 100106841
1000W 115V 100127440 100127441
1000W 230V 100107440 100107441
2000W 115V 100127240 100127241
2000W 230V 100107240 100107241
SH 370-RS2 1000W 230V 100104460 100104461
SH 470-RS2 2000W 115V 100104560 100104561
2000W 230V 100104360 100104361
SH 480-RS2 3000W 115V - 100112250
3000W 230V - 100112260
SH 650-RS2 5000W 230V - 100112160
XS 500-R10 500W 115V - 100221640
500W 230V - 100201640
XS 1000-R10 1000W 115V - 100221340
1000W 230V - 100201340
XS 1600-R10 1600W 115V - 100221440
1600W 230V - 100201440
XS 1000-RS2 1000W 115V - 100220460
1000W 230V - 100200460
XS 1600-RS2 1600W 115V - 100220360
1600W 230V - 100200360
XS 2000-RS2 2000W 115V - 100220760
2000W 230V - 100200760
XS 3000-RS2 3000W 230V - 100200960
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 77
TECHNICAL Searchlight Data
M a riT e a m L ig h tin g In c .
78 A Glamox Company Subject to technical modifications without notice
Lighting Terms TECHNICAL
Technical Lighting Quantities and Units (according to DIN 5031)
Quantity Unit
Quantity Q Lumen Im-h Q=φ x t The product of the luminous flux φ and its duration t
of light Hour
Luminous I Candela cd I=φ / ω The quotient of the luminous flux φ transmitted by a light
Intensity source in a defined solid angle ω and the illuminated solid
angle ω
Illuminance E Lux lx E=φ/Α Quotient of the luminous flux φ to a surface and the area of
that surface A.
Quantity
Luminous η η= φ / P The luminous efficiency η of a light source is the quotient of the luminous flux
Efficiency emitted φ and the electrical power required to produce it. Unit: lm/W.
from a light
source
Optical ηL= φL / φo Quotient of the luminaire’s luminous flux φL and the sum of the lamps luminous
Efficiency
ηL
fluxes φo. For temperature dependent lamps such as fluorescent lamps, the
of a optical efficiency is the highest level of efficiency and no factors affecting the
luminaire luminous flux such as ambient temperature has been taken into consideration. It
indicates only the optical properties of a luminaire and is not to be used for
technical light calculations.
Light output ηLB= φLB(tu) / φo Quotient of a luminaires luminous flux φL emitted of a luminaires ambient
ηLB
Ratio temperature to 250 C, and the sum of the lamps luminous fluxes φo at a lamps
ambient temperature of 250 C. The light output ratio is affected by the luminous
flux/temperature behavior of the lamps and is, in general, less than the optical
efficiency of the luminaire. It takes into account optical ant thermal properties
under working conditions. Only the light output ratio should be used for technical
lighting calculations.
Utilization ηR= φN / φL Quotient of the luminous flux φN, emitted to the affected area, and the total
ηR
luminous flux φL radiated to the room from the luminaires.
Utilization ηB= φN / φO Quotient of the luminous flux φN emitted to the affected area and the sum of the
Factor
ηB
luminous flux φo of all the lamps installed in the luminaires. It is the product of the
ηB= ηR x ηLB
area effectivity factor ηR and the light output ratio ηLB
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 79
TECHNICAL Lamp Comparison
Incandescent lamps Fluorescent lamps
In general there are no major problems. They are economical The main advantage of fluorescent lamps is their economy. In
to install, requiring only a lampholder with two terminals. addition, the elongated shape provides a good lumen/watt ratio
Burning position is not critical, temperature effects are minimal and relatively low luminance on the surface. The tubes
and the bulbs can be dimmed without difficulty. Luminaires therefore produce less glare. They have a very long working
using incandescent bulbs can be used with different voltage life, with an average luminous efficiency of about 80% after
supplies simply by changing the bulb. Average life is 5000-7500 hours. Operation beyond 10,000 hours is possible
approximately 1000 hours. Bulbs for navigation lights are although the luminous efficiency will decline. Lamps up to
developed especially in a view of their intended use in optical 1200 mm in length have a good vibration/shock resistance,
systems, they vary greatly from normal incandescent bulbs: corresponding to the installation. With electronic ballast for
dimming, standard fluorescent lamps can be dimmed without
1) Special socket in order to prevent the use of normal bulbs problems. The lamps are not sensitive to voltage fluctuation
in navigation lights and signaling lights. The special compared with other lamps, but sensitive to ambient
socket also ensures correct filament alignment to lens temperatures. Deviation from average ambient temperature
and horizontal shade systems. causes a decline in luminous flux.
2) Light output and wattage are pushed to a high lumen per
watt ratio. High pressure Mercury Lamps
3) Special filament holders ensure equal light emission over
an unbroken sector of 360. This type of lamps needs no ignition unit and operates with a
4) Schemed manufacturing processes guarantee tight mercury arc. The light from the arc is supplemented by light
tolerance of filament itself and mounting filament. from UV sensitive phosphors. Different light colours, also for
5) Approved in conjunction with the appropriate navigation rendering good colour and for special purposes are offered.
lights worldwide. Burning position is not critical. These lamps offer problem free
operation, but one disadvantage is that they are sensitive to
Halogen lamps voltage interruptions and fluctuations, both of which are likely
to occur onboard ships. Warm lamps may take several
Halogen lamps have a higher luminous efficiency than the minutes to achieve full output after an interruption of power.
ordinary incandescent bulb. Lifetime is estimated at 2000 Lamp life is around 24,000 hours
hours average. Halogen lamps can be dimmed down to 60%
and burn at full strength immediately after a temporary break in
supply. This is useful when considering the question of Low pressure sodium lamps
accident prevention and cannot be achieved with high power
discharge lamps. Offer the highest luminous efficiency of all. They are useful in
all areas where the colour rendered is unimportant as they
Bulb life may be reduced by three factors: produce a monochromatic yellow light rendering poor colours.
Contrast definition is good, particularly in foggy conditions.
1) Vibration particularly relevant to high voltage lamps. In Burning position is important, but no ignitor is necessary and
areas of severe vibration resilient mounts should be used. lifetime is similar to that of mercury vapour lamps.
2) Excess voltage as for incandescent lamps.
3) Burning position linear. Linear halogen bulbs should High pressure sodium lamps
usually be installed with the longitudinal axis horizontal or
within + 4 degrees, however considerable differences These combine very high luminous efficiency with small lamp
exist between individual makes and some bulbs are dimensions. The lamps render good colour and are insensitive
available which will function independently of the burning to vibrations. Ignition is required and small increases to
position. operating voltage over the normal voltage can overload the
lamp and reduce lifetime. Average lifetime is 24,000 hours
Halogen low voltage lamps and this type of lamp is especially suitable for flood and spot
lighting ships exteriors.
High luminous flux, long lamp life (2000 h), constant luminous
flux during the total life of the lamp combined with excellent Metal halide lamps
colour rendering are the advantages of these lamps. Their
small dimensions make the design of small, unobtrusive These lamps have a high luminous efficiency and are excellent
fittings for new versatile fields of application possible. for rendering good colour. Ignition unit is not required. The
burning position of the 250W lamp is limited to +150 degrees
Halogen low voltage lamps with reflector (cool out of the vertical and horizontal axis. The average lifetime is
beam) approx. 15,000 hours. They are used in spots and floodlights.
Manufacturers specification for burning position of the lamp
must be considered.
The lamps radiation of heat is reduced to 34% in order to
illuminate objects sensitive to heat. These lamps can be
dimmed without problems.
M a riT e a m L ig h tin g In c .
80 A Glamox Company Subject to technical modifications without notice
Different Process TECHNICAL
Mariteam Process – Reflectors
Our secret chemical process imparts a pure aluminum-oxide surface on reflectors. This silken smooth finish reflects light semi-diffused
and free of interference, without glare and high maximum luminances. Removal of the iron particles means that the optics retain their
illumination qualities – even in the toughest of environments.
Powder Coating
Our luminaires are powder coated with MX-powder (binder combination of epoxy and polyester)
The powder gets static charged and automatically sprayed on to the product, which is suspended to an “earthed” conveyor. The static
charge makes the powder stick to the product until the powder is melted and hardened in the tempering furnace.
After the product is sprayed with powder, it goes into a tempering furnace with an air temperature of approx. 200 degrees Celsius for 15
minutes causing the powder to melt and harden.
IP PROTECTION CLASSES
The following protection degrees define the protection of electrical appliances against accidental contact, foreign matters and water as
stated in IEC Publication 529 and DIN 40050.
Example: IP 6 7 h0.3
Ident. Mark
1. Ident. Number (see table 1)
2. Ident. Number (see table 2)
Immersion depth in meters
1 Protection against penetration of solid foreign matters, diameter > 50 mm, no protection against intentional contact e.g.
by hand, body contact, however, is prevented.
2 Protection against penetration of solid foreign matters with outside diameter of more that 12 mm; finger contact or similar
is prevented.
Table 1
3 Protection against penetration of solid foreign matters with outside diameter of more that 2.5 mm. Prevents insertion of
tools, wires or similar matters larger than 2.5 mm.
4 Protection against penetration of solid foreign matters with outside diameter of more than 1 mm. Prevents insertion of
tools, wires or similar matters larger than 1 mm.
5 Protection against damaging dust accumulation. The penetration of dust is not totally prevented but is not permitted to
penetrate to such a degree that the effectiveness of the equipment is affected. Complete contact protection.
6 Protection against penetration of dust. Complete contact protection.
1 Protection against vertical falling drip water shall have no harmful effect.
2 Protection against vertical falling drip water, when fixture is shifted up to 15 degrees from its normal operating condition
there shall be no harmful effect (flanking drip water).
3 Protection against spray water falling at any angle up to 60 degrees against perpendicular. It shall have no harmful
effect (spray water).
Table 2
4 Protection against water splashed against the fixture from any direction, shall have no harmful effect (splash water).
5 Protection against water projected by a nozzle against the fixture from any direction, shall have no harmful effect (hosed
water).
6 Protection against heavy seas or strong jet stream, water must not enter the fixture in harmful quantities (overflooding).
7 Protection against water when fixture is submerged under defined conditions of depth. Water shall not enter fixture in
harmful quantities (submerging).
8 The equipment is suitable for continuous submersion in water under conditions specified by the manufacturer.
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 81
TECHNICAL Materials
All Mariteam products are manufactured in materials which are best suited to withstand whatever atmospheric and mechanical
conditions they are exposed to. For this reason our products have an excellent reputation for reliability and long-life, particularly in
rough usage areas.
Aluzinc
Aluzinc is cold rolled steel with a metal coating. The steel guarantees mechanical strength. The coating, made up mainly of an alloy of
Aluminum (55%), zinc(43.4%) and Si(1.6%) guarantees excellent resistance to corrosion. Zinc also gives cathodic protection of cut
edges or surface scratches.
For applications requiring flat corrosion resistant steel, the answer is Aluzinc, which also demonstrates properties of unchanging surface
characteristics at high temperatures up to 310 degrees Celcius. Thanks to these characteristics, Aluzinc fills the gap between zinc-
coated steel and much more expensive materials such as aluminum or stainless steel.
Stainless Steel
Stainless Steel is used in luminaires which are being exposed to the harsh environments at sea, in special industry, especially chemical
industries etc.
In the Mariteam product range you will find luminaires of stainless steel quality SIS 2343, which is identical to American Standards AISI
316, except for containing slightly more molybdenum and nickel, thus making the steel easier to form (deepdrawn).
Plastic
Depending upon the application, a variety of high quality plastic materials are used in production. Some physical characteristics are
shown in the table below and the material used is specified in the individual data sheet.
M a riT e a m L ig h tin g In c .
82 A Glamox Company Subject to technical modifications without notice
Hazardous Areas TECHNICAL
General
In any industry where flammable materials are produced, processed or stored there is a potential risk of explosion.
Although the objective is to prevent the release of gases or flammable mixtures into the atmosphere a release may take
place. Therefore actions are taken to assess the probability of occurrence of hazardous areas and explosion-proof
equipment must be installed in order to prevent an explosion.
Class I
Flammable Gases, Vapors or Liquids
M a riT e a m L ig h tin g In c .
A Glamox Company Subject to technical modifications without notice 83
TECHNICAL Hazardous Areas
Class I, Division 1 and 2 Protection Methods
Applicable Certification Documents
Area Protection Methods U.S. Canada
Div. 1 • Explosionproof UL1203 CSA-30
• Intrinsically safe (2 fault) UL 913 CSA-157
• Purged/pressurized (Type X or Y) NFPA 496 NFPA 496
M a riT e a m L ig h tin g In c .
84 A Glamox Company Subject to technical modifications without notice
Index
M a riT e a m L ig h tin g In c .
A Glamox Company
Canada USA
Corporate Office National Sales Office
Mariteam Lighting Inc. 9000 Clay Road, Suite 104
85 O’Leary Ave. Houston, Texas
St. John’s, Newfoundland E-mail: mariteam@mariteam.com 77080
A1B 2C9 Website: www.mariteam.com Tel: (713) 690-8383
Tel: (709) 753-2373 Fax: (709) 753-2180 Fax: (713) 690-8387
Toll Free: 1-800-938-8326 Toll Free: 1-800-898-2180
CV02