Beruflich Dokumente
Kultur Dokumente
Communication Engineering)
Fifth Semester (C.B.S.)
Microprocessor & Microcontrollers
P. Pages : 2 NIR/KW/18/3409/3414
Time : Three Hours *1765* Max. Marks : 80
_____________________________________________________________________
Notes : 1. All questions carry marks as indicated.
2. Solve Question 1 OR Questions No. 2.
rg
3. Solve Question 3 OR Questions No. 4.
4. Solve Question 5 OR Questions No. 6.
5. Solve Question 7 OR Questions No. 8.
6. Solve Question 9 OR Questions No. 10.
s.O
7. Solve Question 11 OR Questions No. 12.
8. Due credit will be given to neatness and adequate dimensions.
9. Assume suitable data whenever necessary.
10. Illustrate your answers whenever necessary with the help of neat sketches.
1. a) Draw and explain internal architecture of 8086. Also explain the importance of adder 8
nt
block in BIU.
OR
tu
b) Interface 32 kB RAM memory and 64 kB ROM with 8086. The starting address for RAM 7
is 00000H and for ROM is F0000H.
S
3. a) Interface 8255 with 8086 at address 5000H. Also write a program to generate a square 7
ur
OR
4. a) Explain how 8086 responds to interrupts. Explain all dedicated interrupts of 8086. 6
Na
b) Write a program to find out largest number from a string of 10 bytes present in data 7
memory segment. Store result at address 5000H.
b) Interface 8253 with 8086 at address 8000H. Also write a program to generate a square 7
waveform of 1KHz frequency on counter 0 of 8253. Assume 8253 operates at frequency
1MHz
OR
NIR/KW/18/3409/3414 1 P.T.O
6. a) Draw and explain internal block diagram of 8259. 6
b) Interface 8251 with 8086. Also write a program to transfer message "INDIA" in 7
asynchronous mode with even parity enabled, 1 stop bits, 8bit character length and baud
rate factor 16x
rg
OR
s.O
b) Explain various control signals of 8086 in maximum mode. 6
b) Write a program using instructions of 8051 to transfer a block of 10 bytes of data present 7
nt
in external RAM from location 7000H to location 30H of internal RAM.
OR
de
10. a) Explain following special function registers (SPRs) of 8051. 6
1) TMOD 2) IE
3) PSW 4) PCON
11. a) Interface 8bit DAC with 8051 and write a program to generate a saw tooth waveform at 6
DAC output.
S
3) SUBB A1 R 0 4) SWAP
OR
gp
12. a) Interface stepper motor with 8051 and write a program to rotate it in anticlockwise 6
directions continuously.
b) Write a program to transfer message "YES" serially at baud rate of 9600 with one start bit, 8
one stop bit with 8bit character length using 8051. Also explain how we double the baud
Na
rate.
**********
NIR/KW/18/3409/3414 2