Beruflich Dokumente
Kultur Dokumente
1421
- 433 MHz
Decodes variety of RF remote control transmitters at 433 Mhz which
uses encoder chip like PT2260, PT2262, PT2264, HS2260, SC2262,
User's
SC2260 Manual
Doc Version: 1
9-Apr-16
Electronics
http://www.sunrom.com/m/1421
1421 RF Decoder - PT2272 - 433 MHz
Table of Contents
Introduction .................................................................................................................................... 3
Typical Application ......................................................................................................................... 3
Features .......................................................................................................................................... 3
Interfacing with Microcontroller .................................................................................................... 3
Specifications .................................................................................................................................. 4
Module Pin Details.......................................................................................................................... 4
Board Schematic ............................................................................................................................. 4
AddressJumper ............................................................................................................................... 5
Product Dimensions ....................................................................................................................... 6
Support ............................................................................................................................................7
Disclaimer ........................................................................................................................................7
The product is a combination of 433 MHz RF Receiver and decoder IC PT2272 which is a fixed
address type decoder. Fixed address means the user at transmitter and receiver will set address
pins high or low and only the matching address will respond, else it is ignored.
Typical Application
• Remote control
• Security Systems
• Sensor Networks
• Data collection
Features
If you want to operate with microcontroller then it's very simple to connect.
GND GND
+5V +5V
VT IOx
D0-D3 IOx
Parameter Value
Working Voltage 5V DC regulated power supply
Current Consumption 25 mA
Frequency of Operation 433 MHz
On Board IC PT2272
Pin Details
GND Common Ground
+5 Regulated positive power input 5V DC
VT Goes high when valid data is received. LED is connected on pin for indication
D0-D3 Binary data output as per input at transmitter side
Board Schematic
If transmitter has different address than receiver then the receiver will ignore the data packet.
The option of address is to provide some security when multiple units are operated in same
premises.
Default we provide with all pins floating. If you want you can short that address pin to either
high or low to set a unique address.
Board Dimensions in mm
Support
Technical Support is available by email only and scope is limited to problem faced during use of
the use of product and does not cover end user programming and hardware troubleshooting.
Each product passes through strict quality checks before it reaches you. So if something is not
working out right, the first thing to doubt is the connections or programming of your hardware.
Disclaimer
Sunrom Electronics assumes no responsibility or liability for any errors or inaccuracies that may
appear in the present document. Specification and information contained in the present
schematic are subject to change at any time without notice.