Beruflich Dokumente
Kultur Dokumente
REV. 1
E14005 CB3-EC-50-MT-002-A4
TABLE OF CONTENT
1. GENERAL ................................................................................................................................... 4
1.1 Scope ..................................................................................................................................4
1.2 References ..........................................................................................................................4
2. DEFINITIONS .............................................................................................................................. 5
1. GENERAL
1.1 Scope
This document present material take off structural steel for pipanisasi CB-III (Lomanis-
Tasikmalaya)
1.2 References
1.2.1 Related specifications
The following project specifications and document prescribe items of related work:
CB3-EC-50-SP-001-A4 Civil and Structure General Specification,
CB3-EC-50-CA-005-A4 Calculation Sheet for Pump Shelter Structure and
Foundation,
CB3-EC-50-CA-006-A4 Calculation Sheet for Metering Shelter and
Foundation,
CB3-EC-50-CA-007-A4 Calculation Sheet for Densito Meter Shelter and
Foundation,
CB3-EC-50-CA-008-A4 Calculation Sheet for Block Valve Shelter and
Foundation.
1.2.2 Codes and Standards
The following codes and standards are identified for specific or additional
requirements in on:
AISC (American Institute of Steel Construction)
AISC Manual of steel Construction.
AISC Specification for Structural Steel Building.
AISC Code of Standard Practice for Steel Building and Bridges.
Dip)
ASTM A385 Standard Specification for Heat-Treated, Steel Structural Bolts,
150 ksi (1035 MPa) Tensile Strength
ASTM A490 Standard Specification for Cold-Formed Welded and Seamless
Carbon Steel Structural Tubing in Rounds and Shapes.
ASTM A500 Standard Specification for Hot-Formed Welded and Seamless
Carbon Steel Structural Tubing
ASTM A501 Standard Specification for Carbon and Alloy Steel Nuts
ASTM A563 Standard Specification for General Requirements for Steel,
Carbon and High-Strength Low-Alloy Hot- Rolled Sheet and Cold-
Rolled Sheet
ASTM A568 Standard Specification for Hot-Rolled Carbon Steel Sheet and
Strip, Structural Quality
ASTM A570 Standard Specification for High-Strength Low-Alloy Columbium-
Vanadium Steels of Structural Quality
ASTM A572 Standard Specification for Steel, Sheet, Carbon, Cold-Rolled,
Structural Quality
ASTM A611 Standard Specification for Coatings of Zinc Mechanically Deposited
on Iron & Steel
ASTM B695 Standard Specification for Hardened Steel Washers
ASTM F959 Standard Specification for Compressible-Washer-Type Direct
Tension Indicators for Use With Structural Fasteners
2. DEFINITIONS
Definitions used in this document will not violate other definitions used in other documents which is :
Issuer : the person / party who develop and release the document
and correspondence.
Project Documents : All documents which are prepared, revised, and issued
for accelerating the project execution, such as
correspondence, drawings, specifications, requisitions,
purchase orders, and Vendor Prints, etc.