Beruflich Dokumente
Kultur Dokumente
CM0506_K2094
C&M’s diverse range of architectural masonry products offers the architect and designer
a variety of colour, style and texture providing an ideal and distinctive choice for both
residential and commercial application.
Styles and colours have been carefully selected to meet both traditional and modern design.
With 2 standard aggregate bases, 8 colours and 5 finishes, it is possible to specify up to
80 combinations of colour, aggregate and surface texture.
Smooth Stone
Coloured blocks in their natural
moulded state.
Sandhurst Stone
Coloured blocks with a split texture.
Pitched Stone
Coloured blocks with a pitched texture.
Macquarie Stone
Large coloured blocks with a pitched
or split texture.
BONDI BLEND
Technical Information
Standards: General Guidelines: Sound Transmission:
All C&M Architectural Masonry products are manufactured to All C&M Architectural Masonry products should be laid dry, The statutory requirements for sound attenuation are contained
Australian Standards AS 4455 Masonry Units and Segmental so covering on site is recommended. Whenever work is stopped, in the Building Code of Australia (BCA) which requires that some
Pavers and tested for compliance with AS 4456 Masonry Units the tops of walls should be covered to protect from moisture during walls of some buildings be capable of preventing a large proportion
and Segmental Pavers – Methods of Test. Mortar should be construction. All mortar joints should be allowed to set to ‘thumb of incident sound from passing from one wall side to the other.
accurately batched and conform to AS3700. print’ hardness before tooling. Brush away excess mortar with These requirements are set out in Section F5 of the BCA. Refer
a semi-stiff brush at the end of each day’s work. to C&M Fire and Sound brochure for more information.
Control Joints: Sunstone Smooth Stone
Should extend for the full height of the wall and be spaced Cleaning: Ordering:
at a maximum distance of 6 metres apart where walls are Care should be taken to keep stone as clean as possible during C&M Architectural Masonry products are manufactured from C&M’s Smooth Stone offers a modern and
not interrupted by full height doorways or window openings laying. C&M recommend the guidelines within CMAA document natural materials and will vary in colour and texture from batch
(refer Australian Standards). MA41 Cleaning and Maintenance of Concrete Masonry Structures. to batch. All products must be ordered at the one time to ensure creative alternative to standard masonry
that they are supplied from the same batch. Product should be
Joint Reinforcement: Fire Resistance:
blended from different pallets to ensure an even mix of colour
in a large format module.
Masonry mesh is recommended at height intervals of 600mm, Australian Standard AS 3700 Masonry Structures sets out the
throughout any given wall.
and in the two courses above and below all openings. Lap mesh method for determining fire resistance to walls. The Building Code Create subtle textures and stunning effects by using
at least 150mm at all joints and intersections, except at control of Australia requires walls to be designed for insulation, integrity Claims:
joints where a slip joint must be provided. For 90mm walling & structural adequacy. C&M have had extensive CSIRO testing All product must be inspected prior to installation to ensure C&M’s Smooth Stone either on its own or combined
use 50mm reinforcement mesh and for 190mm walling use 150mm for FRL and subsequently have a large range of masonry products satisfaction of colour and texture. No claims will be accepted once
reinforcement mesh. meeting the requirements of the building code. Refer to the C&M Fire product has been installed. Oatmeal Smooth Stone with other stone textures.
and Sound brochure.
Sandhurst Stone
Sandhurst Stone is a versatile masonry product lending itself to the design of both contemporary
and traditional buildings.
Sandhurst Stone is made by manufacturing larger solid units and then splitting into two to create a natural ‘split stone’
appearance. Exposing the natural aggregates, Sandhurst Stone is supplied in a variety of colours and an innovative
range of product shapes and sizes. Sandhurst Stone may be used alone or combined with C&M’s many other finishes.
Macquarie Stone
Ivory Sandhurst Stone & Ivory Honed Designer Masonry Oatmeal Sandhurst Stone
Oatmeal Pitched Stone with Oatmeal Smooth Stone and Ebony Honed Designer Masonry Sunstone Pitched Stone
Flame (custom colour) Pitched Stone with Flame (custom colour) Smooth Stone as quoining and Ebony Honed Designer Masonry
Pitched Stone
Oatmeal Pitched Stone with Oatmeal Smooth Stone and Ebony Honed Designer Masonry Sunstone Pitched Stone
Pitched Stone is formed as per Sandhurst Stone but is then pitched from the sides to give a three
dimensional look and feel to the face of the product. The result being that each piece gains its own
unique appearance.
Used in both contemporary and traditional projects with stunning effect, pitched stone can be used on its own or combined
with C&M’s Smooth Stone or Designer Masonry for a truly distinctive finish.
Flame (custom colour) Pitched Stone with Flame (custom colour) Smooth Stone as quoining and Ebony Honed Designer Masonry
Macquarie Stone
Sandhurst Stone is a versatile masonry product lending itself to the design of both contemporary
and traditional buildings.
Sandhurst Stone is made by manufacturing larger solid units and then splitting into two to create a natural ‘split stone’
appearance. Exposing the natural aggregates, Sandhurst Stone is supplied in a variety of colours and an innovative
Sunstone Honed Designer Masonry with Golden Glaze Aggregate
range of product shapes and sizes. Sandhurst Stone may be used alone or combined with C&M’s many other finishes.
Colour Chart
Smooth Stone
BONDI BLEND
Technical Information
Standards: General Guidelines: Sound Transmission:
All C&M Architectural Masonry products are manufactured to All C&M Architectural Masonry products should be laid dry, The statutory requirements for sound attenuation are contained
Australian Standards AS 4455 Masonry Units and Segmental so covering on site is recommended. Whenever work is stopped, in the Building Code of Australia (BCA) which requires that some
Pavers and tested for compliance with AS 4456 Masonry Units the tops of walls should be covered to protect from moisture during walls of some buildings be capable of preventing a large proportion
and Segmental Pavers – Methods of Test. Mortar should be construction. All mortar joints should be allowed to set to ‘thumb of incident sound from passing from one wall side to the other.
accurately batched and conform to AS3700. print’ hardness before tooling. Brush away excess mortar with These requirements are set out in Section F5 of the BCA. Refer
a semi-stiff brush at the end of each day’s work. to C&M Fire and Sound brochure for more information.
Control Joints:
Should extend for the full height of the wall and be spaced Cleaning: Ordering:
at a maximum distance of 6 metres apart where walls are Care should be taken to keep stone as clean as possible during C&M Architectural Masonry products are manufactured from
not interrupted by full height doorways or window openings laying. C&M recommend the guidelines within CMAA document natural materials and will vary in colour and texture from batch
(refer Australian Standards). MA41 Cleaning and Maintenance of Concrete Masonry Structures. to batch. All products must be ordered at the one time to ensure
that they are supplied from the same batch. Product should be
Joint Reinforcement: Fire Resistance:
blended from different pallets to ensure an even mix of colour
Masonry mesh is recommended at height intervals of 600mm, Australian Standard AS 3700 Masonry Structures sets out the
throughout any given wall.
and in the two courses above and below all openings. Lap mesh method for determining fire resistance to walls. The Building Code
at least 150mm at all joints and intersections, except at control of Australia requires walls to be designed for insulation, integrity Claims:
joints where a slip joint must be provided. For 90mm walling & structural adequacy. C&M have had extensive CSIRO testing All product must be inspected prior to installation to ensure
use 50mm reinforcement mesh and for 190mm walling use 150mm for FRL and subsequently have a large range of masonry products satisfaction of colour and texture. No claims will be accepted once
reinforcement mesh. meeting the requirements of the building code. Refer to the C&M Fire product has been installed.
and Sound brochure.
Architectural Masonry The Range
Dimensions (mm)
Textures
Shot Blasted
Description
No per m2
LxHxW
Smooth
Product
Pitched
Honed
Type
Split
Smooth Stone 10.01 Full Length Hollow 390 x 190 x 90 12.5 • • •
10.02 3/4 Length Hollow (Vic only) 290 x 190 x 90 • • •
C&M’s diverse range of architectural masonry products offers the architect and designer 10.03 1/2 Length Hollow (Vic only) 190 x 190 x 90 • • •
a variety of colour, style and texture providing an ideal and distinctive choice for both 10.04 1/4 Length Hollow (Vic only) 90 x 190 x 90 • • • Notes
residential and commercial application. 10.31 Full Length Solid* 390 x 190 x 90 12.5 • • • • C&M Architectural Masonry is made
to order, please remember to check
Styles and colours have been carefully selected to meet both traditional and modern design. 10.33 1/2 Length Solid (Vic only) 190 x 190 x 90 • • •
lead times when placing your order.
With 2 standard aggregate bases, 8 colours and 5 finishes, it is possible to specify up to 15.01 Full Length Hollow 390 x 190 x 140 12.5 • • •
80 combinations of colour, aggregate and surface texture. 15.22 Corner Hollow 340 x 190 x 140 • • • • C&M Designer Masonry requires
a secondary manufacturing process
15.03 1/2 Length Hollow (Vic only) 190 x 190 x 140 • • •
that requires additional lead time
Smooth Stone 20.01 Full Length Hollow 390 x 190 x 190 12.5 • • • to C&M’s other Architectural
Coloured blocks in their natural 20.03 1/2 Length Hollow (Vic only) 190 x 190 x 190 • • • Masonry products.
moulded state. Sandhurst Stone 10.101 Full Length* 390 x 190 x 90 12.5 • • Quantities per pallet may vary
10.103 1/2 Length (Vic only) 190 x 190 x 90 • from state to state, please refer
to your C&M representative for
10.109 1/2 Height 390 x 90 x 90 25 •
further details.
Sandhurst Stone 15.101 Full Length 390 x 190 x 140 12.5 •
Coloured blocks with a split texture. 20.101 Full Length 390 x 190 x 190 12.5 • • Additional fractions can be made
by cutting, splitting or bolstering
20.103 1/2 Length (Vic only) 190 x 190 x 190 •
blocks on site, which minimises
Pitched Stone 10.111 Full Length* 390 x 190 x 90 12.5 • batch variation.
Pitched Stone 10.113 1/2 Length 190 x 190 x 90 •
• Custom colours and/or aggregates
Coloured blocks with a pitched texture. 20.111 Full Length 390 x 190 x 190 12.5 •
may be available on request. Please
20.113 1/2 Length 190 x 190 x 190 • consult your C&M representative.
Cornerstones 10.LQ Cornerstone 390 x 190 x 190 x 90 • • •
Macquarie Stone 10.LQS Cornerstone 390 x 190 x 190 x 90 •
Large coloured blocks with a pitched 10.LQP Cornerstone 390 x 190 x 190 x 90 •
or split texture. 20.105 Cornerstone (n/a in Vic) 390 x 190 x 190 •
20.115 Cornerstone (n/a in Vic) 390 x 190 x 190 •
Oatmeal Honed Designer Masonry Sill Blocks 10.39 Sill Block 190 x 190 x 90 •
Designer Masonry Honed
20.39 Sill Block 190 x 190 x 190 •
Coloured blocks with a honed finish.
C&M believes quality is paramount to achieving Macquarie Stone 10.248 Full Length 470 x 248 x 105 8 • •
a successful product. Accordingly, all C&M 10.249 Cornerstone 335 x 248 x 105 • •
Architectural Masonry products are manufactured
10.250 1/2 Length 230 x 248 x 105 • •
Designer Masonry Shot-blast with efflorescence inhibitors and colour fastening
10.252 Full Length Bevelled 470 x 248 x 105 8 • ** **
Coloured blocks with a shot-blasted agents. These additives ensure reduced water
finish. absorption, minimisation of efflorescence, 10.253 1/2 Length Bevelled 230 x 248 x 105 • ** **
reduced mould and water staining and continued 10.620 Bevelled Cornerstone 470 x 248 x 235 x105 •
front cover image: Oatmeal Sandhurst Stone & Oatmeal Honed Designer Masonry colour vibrancy. *1 in 8 is a universal block for fractions ** Secondary process is applied to the reverse side of these blocks
Architectural
Architectural Masonry - Ref: CM.AM.0606
CM0506_K2094