Beruflich Dokumente
Kultur Dokumente
Ultrasonic (UT)
Ultrasound is often a used method to detect internal defects / indications in welds and other
objects, especially good on thicker materials where radiography is limited or not possible.
Ultrasound is often used for testing of steel, aluminum, plastics, composite materials and cast
objects
Radiography (RT)
Radiography is the method most often used for checking a weld connection or an object of
internal errors / indications and volume errors. Radiography can be performed in two di erent
ways, by X-ray with an x-ray tube, or by gamma used by an isotope.
In the industrial context PAUT is used including weld inspection , corrosion control and thickness
measurement. Because of the ability to control parameters such as angle , focus, and width of
the beam , this method is very e ective in error detection and the speed of testing.
Castings (UT)
IWI-C og IWE
NYHETER
TBS Inspection AS - Øysandvegen 143 - 7224 Melhus - tlf: +47 950 56 271 - Orgnr. 995
152 746 MVA - Webmail