0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
90 Ansichten1 Seite
This document provides information on different pump seal duties including the barrier fluid, temperature range, and notes for each duty. It lists barrier fluids such as water, water glycol mixtures, methanol, propanol, ethanol, diesel, kerosene, gasoil, mineral oils, white oils, and heat transfer oils. For each it provides the recommended temperature range and notes including compatibility, cleaning requirements, and temperature limits. It also lists fluids that are not recommended as barriers due to additive issues.
This document provides information on different pump seal duties including the barrier fluid, temperature range, and notes for each duty. It lists barrier fluids such as water, water glycol mixtures, methanol, propanol, ethanol, diesel, kerosene, gasoil, mineral oils, white oils, and heat transfer oils. For each it provides the recommended temperature range and notes including compatibility, cleaning requirements, and temperature limits. It also lists fluids that are not recommended as barriers due to additive issues.
This document provides information on different pump seal duties including the barrier fluid, temperature range, and notes for each duty. It lists barrier fluids such as water, water glycol mixtures, methanol, propanol, ethanol, diesel, kerosene, gasoil, mineral oils, white oils, and heat transfer oils. For each it provides the recommended temperature range and notes including compatibility, cleaning requirements, and temperature limits. It also lists fluids that are not recommended as barriers due to additive issues.
Seal duty Barrier product T Product Tandem Product Double Note
Not for high temp, speed and pressure Water 0 to 70 °C Not recommended with circulating pressurizer All when compatible with commercially available automotive anti-freeze should never not for high temp. Water glycol 50/50% -35 to 120 °C volatile HC's product be used All when compatible with commercially available automotive anti-freeze should never low temp services only Water glycol 40/60% -50 to 20 °C volatile HC's product be used. All when compatible with Use for low temperatures only due to hazard barrier and low Cryogenic services only Methanol -90 to 20 °C volatile HC's product viscosity at higher temperatures. All when compatible with Use for low temperatures only due to hazard barrier and low Cryogenic services only Propanol -120 to 80 °C volatile HC's product viscosity at higher temperatures. Methanol preferred All when compatible with Use for low temperatures only due to hazard barrier and low Cryogenic services only Ethanol -110 to 50 °C volatile HC's product viscosity at higher temperatures. Methanol preferred Not for high temp, speed All when compatible with With none volatile product barrier has to be cleaned and pressure Diesel -10 to 60 °C general HC's product periodically. With none volatile product barrier has to be cleaned Not for high temp, speed All when compatible with periodically. Above 80 °C barrier steam quench and pressure Kerosene - 10 to 120 °C general HC's product recommended With none volatile product barrier has to be cleaned High temperature All when compatible with periodically. Above 80 °C barrier steam quench applications Gasoil light 20 to 200 °C All HC's and crude product recommended With none volatile product barrier has to be cleaned High temperature All when compatible with periodically. Above 80 °C barrier steam quench applications Gasoil heavy 40 to 427 °C All HC's and crude product recommended With none volatile pump product barrier has to be cleaned All when compatible with periodically, min. every 3 months. Above 80 °C barrier steam All Mineral oils 0 to 120 °C All HC's and crude product quench recommended General light lub oils ( 5 to 15 cSt @ 40 °C) BP Energol CS10 (10 cSt @ 40 °C) Aeroshell 31 (14 cSt @ 40 °C) Shell Vitrea 9 ( 9 cSt @ 40 °C) Shell Tellus R10 (10 cSt @ 40 °C) Shel Tellus T15 All when compatible with Pharmaceutical White oils 0 to 80 °C Not applicable product Esso Markol 52 (7.4 cST @ 40 °C) Glyserol (280 cSt @ 40 °C) Shell ondina G17 (17 cSt @ 40°C) Shell ondina 15 (15 cSt @ 40 °C) With none volatile product barrier has to be cleaned High temperature All when compatible with periodically. Above 80 °C barrier steam quench applications Heat transfer oils 0 to 427 °C All HC's and crude product recommended General light oils ( 5 to 40 cSt @ 40 °C) preferred 2 cSt at operating temperature Esso Synesstic 32 (30 cSt @ 40 °C) = Mobil Rarus 824! Marlotherm S (15 cST @ 40 °C) Mobiltherm 603 (20 cSt @ 40 °C) BP Transcal N (31 Cst 40 °C) Shell Thermia B (25 t @ 40 °C) Elf Jarytherm BT 06 (2.8 cSt @ 50 °C) Therminol 68 / Santotherm 68 (13.6 cSt @ 40 °C) Total Seriola 22 (19.0 Cst @ 40 °C) Barriers not to be used General motor oils Too many additives (plate out on seal faces) General gear oils Too many additives (plate out on seal faces) General compressor oils Too many additives (plate out on seal faces) General turbine oils Too many additives (plate out on seal faces)