Beruflich Dokumente
Kultur Dokumente
VAN GORP ®
TROUGHING IDLER
SELF-ALIGNING
RETURN IDLER
Also available self-aligning return idler
CEMA
B4, B5, C5, C6, D6 & E7
CLASS IDLERS
TROUGHED IMPACT IDLER
Van Gorp Idler Advantages
3. Features a double, triple labyrinth seal. Filled with lithium based grease.
Prevents penetration of water and contamination into the bearings.
Competition leaves seal dry, exposing the bearing to contamination.
4. Concave seal design utilizes centrifugal force to expel any contamination that is
able to get past the outer dust cover.
5. Internal snap ring to secure the bearing, and an additional external snap ring
secures the seal.
7. ERW1020 Tube material for CEMA B, C, D and E idlers. CEMA F uses DOM Tubing.
10. Capable of operating at temperatures down to -22F or -30C with standard lubrication.
Lower temperatures attainable with optional lubrication.
2 209.579.9608 • www.westcoastpulleys.com
Energy savings from 25% less roll-drag.
Maintenance-free,
high-quality, low-drag,
deep groove ball bearings
CALL 1-800-VAN-GORP (826-4677) for all of your Idler needs! Or email vangorp@vangorp.biz
209.579.9608 • www.westcoastpulleys.com 3
Van Gorp Idlers conform to CEMA standards for
dimensions and meet or exceed CEMA load ratings.
SELF-ALIGNING
TROUGHING IDLER
Also available.
Deep formed
channel end
brackets for
extra strength Non-Clogging
center stands Self cleaning
cross member
Heavy duty foot
brackets made for
one or two bolt
mounting
RETURN IDLER
Carries empty belt on the return run.
FLAT CARRIER
Used for picking and sorting conveyors.
4 209.579.9608 • www.westcoastpulleys.com
0.44” (18”-36”)
(42”-48”)
0.44” (18”-36”)
(42”-48”)
209.579.9608 • www.westcoastpulleys.com 5
ALSO AVAILABLE 4-1/2" DROP BELT-SAVER "S" BRACKETS
B4 RETURN IDLERS
Assembly Description E Bmin D Assembly Weight A C L
B4-1R-18 1.5 4.000 6.0 15.0
27.00 29.00 21.38
B4-4R-18 4.5 3.563/5.000 8.0 17.2
B4-1R-20 1.5 4.000 6.0 16.0
29.00 31.00 23.38
B4-4R-20 4.5 3.563/5.000 8.0 18.2
B4-1R-24 1.5 4.000 6.0 18.0
33.00 35.00 27.38
B4-4R-24 4.5 3.563/5.000 8.0 20.2
B4-1R-30 1.5 4.000 6.0 21.1 Flat Carrier Idlers
39.00 41.00 33.38 also available.
B4-4R-30 4.5 3.563/5.000 8.0 23.3
Same clearance
B4-1R-36 1.5 4.000 6.0 24.1 dimensions as the
45.00 47.00 39.38
B4-4R-36 4.5 3.563/5.000 8.0 26.3 Return Idlers listed.
B4-1R-42 1.5 4.000 6.0 27.2
51.00 53.00 45.38 ALSO AVAILABLE
B4-4R-42 4.5 3.563/5.000 8.0 29.4
14" AND 16" B.W.
B4-1R-48 1.5 4.000 6.0 30.2
57.00 59.00 51.38 MODELS
B4-4R-48 4.5 3.563/5.000 8.0 32.5
D D
6 209.579.9608 • www.westcoastpulleys.com
0.44” (18”-36”)
(42”-48”)
B5 TROUGHING IDLERS
Assembly Description E H K Assembly Weight A C Bmin D L
B5-20TE-18 9.907 20.538 7.50 34.3
27 29 5.5 8.00 6.75
B5-35TE-18 11.435 18.214 7.50 35.9
B5-20TE-20 10.204 23.041 7.50 36.6
29 31 5.5 8.00 7.625
B5-35TE-20 11.935 20.506 7.50 38.3
B5-20TE-24 10.658 26.870 7.50 40.3
33 35 5.5 8.00 8.938
B5-35TE-24 12.695 24.016 7.50 42.2
B5-20TE-30 11.385 32.991 7.50 46.1
39 41 5.5 8.00 11.063
B5-35TE-30 13.914 29.625 7.50 48.3
B5-20TE-36 12.070 38.765 7.50 51.7
45 47 5.5 8.00 13.063
B5-35TE-36 15.064 34.915 7.50 54.3
B5-20TE-42 13.249 44.463 8.50 62.8
51 53.5 5.5 / 7.0 9.50 15.063
B5-35TE-42 16.702 40.135 8.50 65.7
B5-20TE-48 13.93 50.24 8.50 62.5
57 59.5 5.5 / 7.0 9.50 17.06
B5-35TE-48 17.85 45.43 8.50 65.7
ALSO AVAILABLE 14” AND 16” B.W. MODELS
0.44” (18”-36”)
(42”-48”)
209.579.9608 • www.westcoastpulleys.com 7
ALSO AVAILABLE 4-1/2" DROP BELT-SAVER "S" BRACKETS
B5 RETURN IDLERS
Assembly Description E Bmin D Assembly Weight A C L
B5-1R-18 1.5 4.000 6.0 18.2
27.00 29.00 21.375
B5-4R-18 4.5 3.563/5.000 8.0 20.7
B5-1R-20 1.5 4.000 6.0 19.4
29.00 31.00 23.375
B5-4R-20 4.5 3.563/5.000 8.0 21.9
B5-1R-24 1.5 4.000 6.0 21.9
33.00 35.00 27.375
B5-4R-24 4.5 3.563/5.000 8.0 24.4
B5-1R-30 1.5 4.000 6.0 25.6
39.00 41.00 33.375
B5-4R-30 4.5 3.563/5.000 8.0 28.0
B5-1R-36 1.5 4.000 6.0 29.2
45.00 47.00 39.375
B5-4R-36 4.5 3.563/5.000 8.0 31.7
B5-1R-42 1.5 4.000 6.0 32.9
51.00 53.00 45.375
B5-4R-42 4.5 3.563/5.000 8.0 35.4
B5-1R-48 1.5 4.000 6.0 36.6
57.00 59.00 51.375
B5-4R-48 4.5 3.563/5.000 8.0 39.1
ALSO AVAILABLE 14" AND 16" B.W. MODELS
D D
8 209.579.9608 • www.westcoastpulleys.com
C5 EQUAL TROUGHING IDLERS
Assembly Description E H K Assembly Weight A C Bmin D L
C5-20TE-24 11.69 27.09 8.50 50.3
33 35.0 5. 5 / 7.0 9.50 8.94
C5-35TE-24 13.77 24.51 8.50 52.4
C5-20TE-30 12.54 33.21 8.63 57.5
39 41.5 5. 5 / 7.0 9.50 11.06
C5-35TE-30 15.12 30.12 8.63 59.9
C5-20TE-36 13.22 39.98 8.63 67.7
45 47.5 5. 5 / 7.0 9.50 13.06
C5-35TE-36 16.27 35.41 8.63 70.5
C5-20TE-42 14.28 44.68 9.00 75.3
51 53.5 5. 5 / 7.0 9.50 15.06
C5-35TE-42 17.78 40.63 9.00 78.3
C5-20TE-48 14.96 50.45 9.00 82.5
57 59.5 5. 5 / 7.0 9.50 17.06
C5-35TE-48 18.93 45.92 9.00 85.8
C5-20TE-54 15.65 56.23 9.00 96.2
63 65.5 7.0 10.94 19.06
C5-35TE-54 20.08 51.21 9.00 100.2
C5-20TE-60 16.33 62.00 9.00 103.9
69 71.5 7.0 10.94 21.06
C5-35TE-60 21.23 56.50 9.00 108.3
ALSO AVAILABLE Ø4" ROLLER,
18" AND 20" B.W. MODELS
209.579.9608 • www.westcoastpulleys.com 9
ALSO AVAILABLE 4-1/2" DROP BELT-SAVER "S" BRACKETS
C5 RETURN IDLERS
Assembly Description E Bmin D Assembly Weight A C L
C5-1R-24 1.5 4.000 6.0 24
33 35 27.38
C5-4R-24 4.5 3.563/5.000 8.0 26
C5-1R-30 1.5 4.000 6.0 29
39 41 33.38
C5-4R-30 4.5 3.563/5.000 8.0 30
C5-1R-36 1.5 4.000 6.0 33
45 47 39.38
C5-4R-36 4.5 3.563/5.000 8.0 35
C5-1R-42 1.5 4.000 6.0 37
51 53 45.38
C5-4R-42 4.5 3.563/5.000 8.0 39
C5-1R-48 1.5 4.000 6.0 42
57 59 51.38
C5-4R-48 4.5 3.563/5.000 8.0 43
C5-1R-54 1.5 4.000 6.0 46
63 65 57.38
C5-4R-54 4.5 3.563/5.000 8.0 47
C5-1R-60 1.5 4.000 6.0 51
69 71 63.38
C5-4R-60 4.5 3.563/5.000 8.0 53
ALSO AVAILABLE Ø4" ROLLER,18" AND 20" B.W. MODELS
* Flat Carrier Idlers also available. Same clearance dimensions as the Return Idlers listed.
51 53 45.38
C5-4RRD-54 4.50 3.563/5.000 8.0 45
C5-1RRD-60 1.50 4.000 6.0 48
57 59 51.38
C5-4RRD-60 4.50 3.563/5.000 8.0 50 D
D D
10 209.579.9608 • www.westcoastpulleys.com
C6 EQUAL TROUGHING IDLERS
Assembly Description E H K Assembly Weight A C Bmin D L
C6-20TE-18 11.405 20.415 9.00 49.3
27 29 5.5 / 7.0 9.50 6.75
C6-35TE-18 12.924 18.136 9.00 51.2
C6-20TE-20 11.702 22.918 9.00 52.7
29 31 5.5 / 7.0 9.50 7.625
C6-35TE-20 13.423 20.429 9.00 54.6
C6-20TE-24 12.156 26.749 9.00 58.0
33 35 5.5 / 7.0 9.50 8.938
C6-35TE-24 14.183 23.939 9.00 60.0
C6-20TE-30 13.008 32.869 9.125 66.6
39 41.5 5.5 / 7.0 9.50 11.063
C6-35TE-30 15.528 29.545 9.125 69.0
C6-20TE-36 13.693 38.643 9.125 78.2
45 47.5 5.5 / 7.0 9.50 13.063
C6-35TE-36 16.677 34.838 9.125 80.9
C6-20TE-42 14.747 44.341 9.50 87.1
51 53.5 5.5 / 7.0 9.50 15.063
C6-35TE-42 18.190 40.057 9.50 90.1
C6-20TE-48 15.432 50.115 9.50 95.6
57 59.5 5.5 / 7.0 9.50 17.063
C6-35TE-48 19.340 45.348 9.50 98.9
C6-20TE-54 16.118 55.889 9.50 110.5
63 65.5 5.5 / 7.0 10.94 19.063
C6-35TE-54 20.489 50.639 9.50 114.6
C6-20TE-60 16.803 61.663 9.50 119.6
69 71.5 5.5 / 7.0 10.94 21.063
C6-35TE-60 21.639 55.926 9.50 124.0
209.579.9608 • www.westcoastpulleys.com 11
ALSO AVAILABLE 4-1/2" DROP BELT-SAVER "S" BRACKETS
C6 RETURN IDLERS
Assembly Description E Bmin D Assembly Weight A C L
C6-1R-18 1.50 4.00 6.0 26.2
27 29 21.375
C6-4R-18 4.50 3.563/5.000 8.0 28.5
C6-1R-20 1.50 4.00 6.0 28.1
29 31 23.375
C6-4R-20 4.50 3.563/5.000 8.0 30.4
C6-1R-24 1.50 4.00 6.0 32.0
33 35 27.375
C6-4R-24 4.50 3.563/5.000 8.0 34.2
C6-1R-30 1.50 4.00 6.0 37.7
39 41 33.375
C6-4R-30 4.50 3.563/5.000 8.0 39.9
C6-1R-36 1.50 4.00 6.0 43.5
45 47 39.375
C6-4R-36 4.50 3.563/5.000 8.0 45.7
C6-1R-42 1.50 4.00 6.0 49.2
51 53 45.375
C6-4R-42 4.50 3.563/5.000 8.0 51.4
C6-1R-48 1.50 4.00 6.0 54.9
57 59 51.375
C6-4R-48 4.50 3.563/5.000 8.0 57.2
C6-1R-54 1.50 4.00 6.0 60.7
63 65 57.375
C6-4R-54 4.50 3.563/5.000 8.0 62.9
C6-1R-60 1.50 4.00 6.0 66.4
69 71 63.375
C6-4R-60 4.50 3.563/5.000 8.0 68.6
12 209.579.9608 • www.westcoastpulleys.com
0.44” (18”-36”)
(42”-48”)
0.44” (18”-36”)
(42”-48”)
209.579.9608 • www.westcoastpulleys.com 13
ALSO AVAILABLE 4-1/2" DROP BELT-SAVER "S" BRACKETS
D6 RETURN IDLERS
14 209.579.9608 • www.westcoastpulleys.com
0.44” (18”-36”)
(42”-48”)
0.44” (18”-36”)
(42”-48”)
209.579.9608 • www.westcoastpulleys.com 15
ALSO AVAILABLE 7" AND 4-1/2" DROP BELT-SAVER "S", AND 1-1/2" AND 4-1/2" DROP REGULAR BRACKETS
E7 RETURN IDLERS
Assembly Description E Bmin D Assembly Weight A C L
E7-7R-36 7.0 7.50/9.00 12.0 87.3 45 47.5 40
E7-7R-42 7.0 7.50/9.00 12.0 97.8 51 53.5 46
E7-7R-48 7.0 7.50/9.00 12.0 108.2 57 59.5 52
E7-7R-54 7.0 7.50/9.00 12.0 118.7 63 65.5 58
E7-7R-60 7.0 7.50/9.00 12.0 129.2 69 71.5 64
E7-7R-66 7.0 7.50/9.00 12.0 136.9 75 77.5 70
E7-7R-72 7.0 7.50/9.00 12.0 150.1 81 83.5 76
E7-7R-84 7.0 7.50/9.00 12.0 171.0 93 95.5 88
E7-7R-96 7.0 7.50/9.00 12.0 191.9 105 107.5 100
E7-7R-102 7.0 7.50/9.00 12.0 202.4 111 113.5 106
ALSO AVAILABLE Ø6" ROLLER MODELS
*Flat Carrier Idlers also available. Same clearance dimensions as the Return Idlers listed.
ALSO AVAILABLE 7" DROP BELT-SAVER "S", AND 7" DROP REGULAR BRACKETS
1-1/4"
1-1/4"
16 209.579.9608 • www.westcoastpulleys.com
CEMA Load Ratings
CEMA Load Ratings for CEMA B Idlers (Lbs)
209.579.9608 • www.westcoastpulleys.com 17
IdlerIdler Warranty:
Warranty:
We We warrant
warrant our our
CEMACEMA
ClassClass Idlers
Idlers against
against defects
defects in material
in material or or workmanship
workmanship forfor
aa
period of 36 Months from the date of shipment. The Idlers shall
period of 36 Months from the date of shipment. The Idlers shall be installed in be installed in
accordance
accordance withwith manufacturers’
manufacturers’ recommendations;
recommendations; thethe loads
loads shall
shall notnot exceed
exceed thethe
normal
normal conditions.
conditions. Whenever,
Whenever, under
under thethe warranty,
warranty, it isit necessary
is necessary forfor
youyouto to replace
replace
parts or Idlers, Van Gorp shall furnish such items free of charge,
parts or Idlers, Van Gorp shall furnish such items free of charge, Exworks/FCA, PellaExworks/FCA, Pella
Iowa.
Iowa. No allowance
No allowance will will be made
be made for for
anyany expense
expense incurred
incurred in in repairing
repairing or or replacing
replacing
defective Idlers, or supplying any missing parts, except with the written consent of Van
defective Idlers, or supplying any missing parts, except with the written consent of Van
Gorp.
Gorp.
We warrant our Endurance Class Idlers against defects in material or workmanship for a
We warrant our Endurance Class Idlers against defects in material or workmanship for a
period of 120 Months from the date of shipment. It is required that you have filled in a
period of 120 Months from the date of shipment. It is required that you have filled in a
data sheet for each conveyor system at time of order. The Idlers shall be installed in
data sheet for each conveyor system at time of order. The Idlers shall be installed in
accordance with manufacturers’ recommendations; the loads shall not exceed the
accordance with manufacturers’ recommendations; the loads shall not exceed the
normal conditions. This warranty only applies to the specific conveyor for which the
normal conditions. This warranty only applies to the specific conveyor for which the
idlers were specifically designed for. Whenever, under the warranty, it is necessary for
idlers were specifically designed for. Whenever, under the warranty, it is necessary for
you to replace parts or Idlers, a current data sheet must be submitted and Van Gorp
you shall
to replace
furnishparts
suchoritems
Idlers, a of
free current data
charge, sheet must be
Exworks/FCA, submitted
Pella Iowa. Noand Van Gorp
allowance will be
shallmade
furnish
for such items free
any expense of charge,
incurred Exworks/FCA,
in repairing Pelladefective
or replacing Iowa. No allowance
Idlers, will be
or supplying
madeanyformissing
any expense incurred
parts, except in the
with repairing
writtenorconsent
replacing defective
of Van Gorp Idlers, or supplying
any missing parts, except with the written consent of Van Gorp
All warranty claims must be submitted in writing using the Van Gorp Warranty Claim
All warranty
form claims must be submitted in writing using the Van Gorp Warranty Claim
form
The statements above are a partial summary of the full Van Gorp Standard Terms and Conditions
The of Sale which
statements wereare
above in affect at time
a partial of saleof
summary and
theshall define
full Van andStandard
Gorp govern all termsand
Terms andConditions
conditions of
the which
of Sale sale. were in affect at time of sale and shall define and govern all terms and conditions of
the sale.
18 209.579.9608 • www.westcoastpulleys.com
NOTES
209.579.9608 • www.westcoastpulleys.com 19
CPC
CONVEYOR PULLEY & COMPONENTS INC.
VAN GORP ®