0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
278 Ansichten2 Seiten
This document provides formulas and abbreviations for calculating well intervention pressure control parameters. It includes formulas to calculate: [1] pressure gradient; [2] fluid density; [3] hydrostatic pressure; [4] formation pressure; [5] total pressure at a given depth in a shut-in wellbore. It also provides formulas to calculate: [6] time to pump fluid through tubing or annulus; and [7] number of pump strokes required to displace fluid through tubing or annulus. Standard SI units and abbreviations used include kPa, m, kg/m3, m3/m, m3/min, and m3/stroke.
This document provides formulas and abbreviations for calculating well intervention pressure control parameters. It includes formulas to calculate: [1] pressure gradient; [2] fluid density; [3] hydrostatic pressure; [4] formation pressure; [5] total pressure at a given depth in a shut-in wellbore. It also provides formulas to calculate: [6] time to pump fluid through tubing or annulus; and [7] number of pump strokes required to displace fluid through tubing or annulus. Standard SI units and abbreviations used include kPa, m, kg/m3, m3/m, m3/min, and m3/stroke.
This document provides formulas and abbreviations for calculating well intervention pressure control parameters. It includes formulas to calculate: [1] pressure gradient; [2] fluid density; [3] hydrostatic pressure; [4] formation pressure; [5] total pressure at a given depth in a shut-in wellbore. It also provides formulas to calculate: [6] time to pump fluid through tubing or annulus; and [7] number of pump strokes required to displace fluid through tubing or annulus. Standard SI units and abbreviations used include kPa, m, kg/m3, m3/m, m3/min, and m3/stroke.
kPa/m = KiloPascal per metre BHP = Bottom Hole Pressure kg/m3 = Kilogram per cubic metre m3/m = Cubic metres per metre m3/min = Cubic metre per minute m3/stroke = Cubic metre per stroke M = Metre MD = Measured Depth TVD = True Vertical Depth SIWHP = Shut in Well Head Pressure 0.00981 = Constant factor
1. PRESSURE GRADIENT (kPa/m)
Mud Density (kg/m3) x 0.00981
2. FLUID DENSITY (kg/m3)
Pressure (kPa) ÷ TVD (m) ÷ 0.00981
Or
Pressure (kPa) TVD (m) x 0.00981
3. HYDROSTATIC PRESSURE (kPa)
Mud Density (kg/m3) x 0.00981 x TVD (m)
4. FORMATION PRESSURE (kPa)
Hydrostatic Pressure in Drill String (kPa) + SIDPP (kPa)
5. TOTAL PRESSURE AT A GIVEN DEPTH IN A SHUT IN WELLBORE (kPa)
(Where BHP = Formation Pressure)
Hydrostatic pressure of Gas (kPa) + Hydrostatic Pressure of Oil (kPa) + SIWHP (kPa)
6. TIME TO PUMP (minutes)
Tubing Capacity (m3 /m) x MD (m)
a. Tubing Pump Rate (m3 /min)
Annulus Capacity (m3 /m) x MD (m)
b. Annulus Pump Rate (m3 /min)
April 2016 EX-0042 Version 1.0 Page 1 of 2
Printed copies are UNCONTROLLED: It is the user’s responsibility to verify printed material against the controlled document Well Intervention – English SI – Formula Sheet
7. STROKES TO DISPLACE (Strokes)
Tubing Capacity (m3 /m) x MD (m)
a. Tubing Pump Displacement (m3 /stroke)
Annulus Capacity (m3 /m) x MD (m)
b. Annulus Pump Displacement (m3 /stroke)
April 2016 EX-0042 Version 1.0 Page 2 of 2
Printed copies are UNCONTROLLED: It is the user’s responsibility to verify printed material against the controlled document