Beruflich Dokumente
Kultur Dokumente
To deinstall the work:
Please, retrieve the Pelican case in the gallery The computer is connected to the TV/Display/
office, locate the bluetooth mouse and bluetooth Monitor by an HDMI cable. Unplug the HDMI cable
keyboard therein. from the TV by reaching behind the TV. Unplug the
Replace the AAA batteries in the mouse and then power cable for the TV from the wall. It should now be
touch the small button on the bottom of the mouse for safe to remove the TV from its mount and set aside.
it to pair with the Mac Mini computer behind the The HDMI cable belongs to the gallery, or to UTSA.
screen.
On the keyboard, touch the power button on the With the TV dismounted and the computer shut
right hand side for it to pair with the Mac Mini down it should now be safe to unplug the cables that
computer. There should be a small blinking green remain connected to the computer. These are other
LED that will signal that it has paired. end of the HDMI cable (black), the USB cable for the
Once paired, press the escape key, or the webcam (white, 10'), and the power cable (white).
command+Q keys on the keyboard to quit the game. Please unplug these now.
You may quit TSPS, which should still be running,
but it is not absolutely necessary. There should be a velcro cable tie for the
With the mouse, click on the apple icon in the computer power cable. There is a picture below for
upper right corner of the menu bar and drag down to how tightly to pack it.
the Shut Down command.
Remove the batteries from the mouse and
keyboard and return them to the gallery with my
thanks for the loan, and for the effort to find them at
the last minute.
Migraciones Deinstallation Instructions UTSA 2018 Page 2 of 6
Retrieve security key from small
ziplock bag in the Pelican case. Use
Key to unscrew lockscrew.
Slide CPU out of security
mounting bracket.
This will reveal the two drywall
scews that were use to attach the
security mount to the wall.
Unscrew the drywall screws to
dismount the security mounting
bracket.
Migraciones Deinstallation Instructions UTSA 2018 Page 3 of 6
Slide the computer back into the security mount
and place both into empty security mount cardboard
box.
Place security screw and keys into the small
ziploc bag back and place into secruity mount
cardboard box as well.
Use some of the loose foam or crumpled paper to
wedge the computer so it doesn't slide around in
transit.
Close the cardboard box and place into Pelican
case such that there is a solid piece of foam below it,
and the box and its foam form the middle layer in the
Pelican case.
Migraciones Deinstallation Instructions UTSA 2018 Page 4 of 6
To Deinstall the camera:
The camera and mounting bracket are attached to
the gallery wall with two drywall screws.
It may be difficult to unscrew the drywall screws
without damaging it.
Please find the small allen wrench that is in a
Plano box inside the Pelican case. Remove the hex
screw that connects the camera case with camera's
mounting bracket. This screw is visible in the closeup
photo above.
It is now possible to remove the mounting bracket
from the wall. These two drywall screws are mine.
The mounting bracket holes were made to measure.
The white USB cable attached to the camera can
be GENTLY removed from the camera for easier
packing. The plug can be rocked gently back and
forth with finger nail or with needlenose pliers. The
picture at right shows the connection without the
case. The plug may not stand out from the case
enough for you to get purchase. You may cut the USB
cable at the heatshrink near the camera if so.
Migraciones Deinstallation Instructions UTSA 2018 Page 5 of 6
To pack the camera, please retreive the USB
Cameral Module cardboard box from the Pelican
Case. There should be a lens cap in the bubblewrap
packing bag within this cardboard box. Place the lens
cap on the lens. If the lens gets scratched the camera
becomes useless as a sensing device.
Place the camera in the bubblewrap bag. Place
the bubblewrap bag with the camera into the
cardboard box. Place the cardboard box into the layer
of foam within the Pelican case as shown on page 6
below.
The small bits of hardware and screws, and the
Allen wrench, can be placed inside the small Plano
box. The small Plano box should be inserted into the
top layer of foam in the Pelican case as shown on
page 6 below.
The white USB cable should be wound so as to fit
within the bag labelled USB Power Charger & Synch
Extension Cable. This bag is to be placed in the top
layer of packing foam within the Pelican case as
shown at the bottom of page 6.
Migraciones Deinstallation Instructions UTSA 2018 Page 6 of 6
Please seal the Pelican case with cable ties and
ship to the address on the business card attached to
the case. Please insure for the replacement value of
the hardware as stated in the loan agreement.