Sie sind auf Seite 1von 218

Camera User Guide

This manual is for Caplio GX100 and


Caplio GX100 VF KIT. Caplio GX100
VF KIT is supplied with an LCD
viewfinder (VF-1).

The serial number of this product is given on the bottom face of the camera.

Basic Operations Advanced Operations


If you are using the camera for the Read this section when you want
first time, read this section. to learn more about the different
camera functions.
This section provides a basic overview of This section provides more detailed
how to turn on the camera, take pictures information about the functions used to
and play back pictures. take pictures and play back pictures, as
well as information on how to customize
the camera settings, print pictures, and
use the camera with a computer.

Note
Do not connect the USB cable yet!
If you connect the camera to a computer through the USB
cable before installing the provided software on the
computer, the software required for connection between
camera and computer may not be installed correctly. Be
sure to connect the camera to your computer after
installing the provided software. (GP.164)
Preface

This manual provides information on how to use the shooting and playback
functions of this product, as well as warnings on its use.
To make the best use of this product’s functions, read this manual thoroughly
before use. Please keep this manual handy for ease of reference.
Ricoh Co., Ltd.
Safety Precautions For the safe use of your camera, be sure to read the safety precautions
thoroughly.
Test Shooting Please be sure to do some test shooting to make sure it is recording
properly before normal use.
Copyright Reproduction or alteration of copyrighted documents, magazines, music
and other materials, other than for personal, home or similarly limited
purposes, without the consent of the copyright holder is prohibited.
Exemption from Liability Ricoh Co., Ltd. assumes no liability for failure to record or play back images
caused by malfunction of this product.
Warranty This product is manufactured to local specifications and the warranty is valid
within the country of purchase. Should the product fail or malfunction while
you are abroad, the manufacturer assumes no responsibility for servicing
the product locally or bearing the expenditure incurred thereof.
Radio Interference Operating this product in the vicinity of other electronic equipment may
adversely affect the performance of both devices. In particular, operating
the camera close to a radio or television may lead to interference. If
interference occurs, follow the procedures below.
• Move the camera as far away as possible from the TV, radio or other
device.
• Reorient the TV or radio antenna.
• Plug the devices into separate electrical outlets.
This publication may not be reproduced in whole or in part without the express written permission of Ricoh.
© 2007 RICOH CO., LTD. All rights reserved.
The contents of this document may be changed in the future, without prior notice.
This booklet was created with thorough attention to its content. If, however, you have a question, spot an
error, or find a description lacking, please refer to the end of this booklet for information on how to contact us.

Microsoft, MS, Windows, and Windows Vista are registered trademarks of Microsoft Corporation in the
United States of America and other countries.
Macintosh, Power Macintosh, and Mac OS are registered trademarks of Apple Inc. in the United States of
America and other countries.
Adobe and Adobe Acrobat are trademarks of Adobe Systems Incorporated.
All trademarked company and product names mentioned in this manual are the property of their respective
owners.
Using These Manuals

The following two manuals are included with your Caplio GX100/
Caplio GX100 VF KIT.
“Camera User Guide” (This booklet)
This guide explains the usage and functions of the camera. It
also explains how to install the provided software on your
computer.
* The “Camera User Guide” (English edition) is available from
the provided CD-ROM as a PDF file.
“Software User Guide” (PDF file)
This guide explains how to download images from the camera
to your computer and display and edit them on your computer.
The “Software User Guide” is available in the following folders
on the provided CD-ROM.

“Camera User Guide” (English


edition) (PDF file)
Each language has its own
“Software User Guide” in the
respective folder.
To copy the Software User Guide onto
your hard disk, copy the PDF file from
the respective folder directly to your
hard disk.

The camera is provided with the Irodio Photo & Video Studio software that
allows you to display and edit images on your computer. For how to use Irodio
Photo & Video Studio, see the displayed “Help”.
For more information on Irodio Photo & Video Studio, contact the Customer
Support Center below.
North America (U.S.) TEL: (Toll Free) +1-800-458-4029
Europe
UK, Germany, France and Spain: TEL: (Toll Free) +800-1532-4865
Other Countries: TEL: +44-1489-564-764
Asia TEL: +63-2-438-0090
China TEL: +86-21-5450-0391
Business hours: 9:00 AM to 5:00 PM
1
Key Features

Wide-angle zoom lens can capture wide-


angle pictures
This camera has a compact body only 25
mm thick, featuring a 24-mm* (Wide-angle)
to 72-mm* (Telephoto) 3× optical zoom lens
that covers a wide range of shooting. The
wide-angle lens is great for capturing
buildings, landscape scenes, group photos,
and more.
*Equivalent to that on a 35mm camera
Camera shake correction function
reduces blurring (P.106)
The camera comes with a camera shake
correction function to allow you to take
clearer pictures with minimized blurring
even indoors, at night and in other
situations where camera shake may occur.

Variety of accessories for greater


creative expression (P.16)
Use the camera with the optional hood &
adapter and 19-mm wide conversion lens to
capture even wider angles. Enhance your
photographic experience with a variety of
optional accessories, including an LCD
viewfinder and cable switch. The camera is
equipped with a hot shoe to allow you to use
an external flash.
Macro shooting at 1 cm (P.43) and close-
up flash shooting at 15 cm (Telephoto)
or 20 cm (Wide-angle) (P.44)
The unsurpassed macro shooting function
allows you to capture details from a very
close distance at only 1 cm. The camera
also has a built-in flash for close-up shots at
15 cm (Telephoto) or 20 cm (Wide-angle).
This combination gives you clear macro
shots even under low light conditions.

2
Aperture priority mode, manual
exposure mode, and program shift mode
for fine-tuned adjustments
You can manually set the aperture value
and shutter speed. This small, compact,
and lightweight camera has advanced
modes that rival those of digital SLR
cameras.
Power your camera in one of three ways (P.25)
You can power the camera in one of three
ways for convenient shooting anytime,
anywhere. Use the supplied large-capacity
rechargeable battery for long periods of
shooting and playback. Use commercially
available alkaline batteries when traveling
with your camera. Use the convenient AC
adapter for transferring data to a computer.
10.01 megapixel CCD and RAW mode for
high-quality shooting (P.80)
The camera has a CCD with 10.01 million
effective pixels to ensure high-resolution images.
In addition, you can use RAW mode to save
the raw picture data (as a .DNG file). This
provides less image quality deterioration
than JPEG files and easier image
processing on a computer. A JPEG file
based on the DNG file is recorded at the
same time.
Up-down dial and ADJ. lever for faster
and easier operations (P.20)
You can use the up-down dial and ADJ. lever
to quickly and easily make the shooting
settings and various menu operations.
You can also press the ADJ. lever to easily
select ADJ. mode (P.64) and make various
shooting settings.

30 fps or 15 fps high-quality movies with


sound (P.109)
Record high-quality movies with 640 × 480
pixels at 30 frames per second and with full
sound.

3
Easily customize your favorite shooting
settings with my settings mode (P.76)
You can customize two groups of settings,
and then turn the mode dial to MY1 or MY2
to shoot with those registered settings.

Skew correction mode helps straighten


skewed images (P.46)
In skew correction mode, a rectangular
object shot at an angle can be straightened
to look as if it were shot squarely. With the
simple touch of a button, you can straighten
skewed images of objects such as a
message board, a display panel, or a name
card.
USB cable enables instant transfer of
camera data to a computer
Install the provided software on your computer
and then simply connect the camera to your
computer with the provided USB cable to
automatically transfer images to your computer.
The camera is compatible with USB 2.0 for
high-speed data transfers. (Your computer
must also be compatible with USB 2.0 to
take advantage of this feature.)
Irodio Photo & Video Studio software for
browsing, viewing, and editing still
images and movies (P.166)
This bundled software enables you to view,
organize, and edit shot images. You can
also use the video editor function to create
movies using still images, video clips,
audio, and music files.
Direct printing without the use of a
computer (P.128)
A direct print-compatible printer can be
connected to the camera with the USB
cable to directly transfer images to the
printer. This allows for easy printing without
using a computer.
You can also print reports.

4
Contents
Using These Manuals.................................................................... 1
Key Features ................................................................................. 2
Contents ........................................................................................ 5

Basic Operations 11
If you are using the camera for the first time, read this section.
Packing List ................................................................................. 12
Optional Accessories ..............................................................................14
Camera System and Accessories ............................................... 16
Names of Parts............................................................................ 17
How to Use the Mode Dial........................................................... 19
How to Use the Up-down Dial and ADJ. Lever............................ 20
LCD Monitor Display ................................................................... 22
Getting Ready ............................................................................. 25
About the Battery ....................................................................................25
SD Memory Card (available in stores) ....................................................27
Charging the Rechargeable Battery........................................................29
Loading the Battery and SD Memory Card .............................................30
Turning the Power On/Off .......................................................................32
Setting the Language..............................................................................34
Setting the Date and Time ......................................................................35
Basic Shooting ............................................................................ 36
Holding the Camera ................................................................................36
Shooting..................................................................................................38
Using the Zoom Function........................................................................42
Shooting Close-Ups (Macro Shooting)....................................................43
Using the Flash .......................................................................................44
Shooting with Optimal Settings According to Shooting Conditions.........46
t Using the Self-Timer ...........................................................................50
Playing Back Images ................................................................... 51
Reviewing the Image You Just Took (Quick Review) .............................51
Viewing Your Images ..............................................................................52
Three-frame View/Grid View (Thumbnail Display) ..................................53
Magnifying Images ..................................................................................55
Deleting Files............................................................................... 56
Deleting a File .........................................................................................56
Deleting All Files .....................................................................................57
Deleting Multiple Files at One Time ........................................................57

5
Changing the Display with the DISP. Button ............................... 59
Maximizing the LCD Monitor Brightness .................................................61
Histogram................................................................................................61

Advanced Operations 63
Read this section when you want to learn more about the different camera
functions.

1 Various Shooting Functions 64


Using the ADJ. Lever .................................................................. 64
ADJ. Mode ..............................................................................................64
Changing the Text Density (Scene Mode) ..............................................65
Shifting the AF Target (Macro)................................................................66
Using the Function Button ........................................................... 67
Settings by Mode ....................................................................................68
Switching Between Auto Focus and Manual Focus (AF/MF)..................69
Locking the Exposure (AE LOCK) ..........................................................70
Shooting with a Set Aperture Value
(A: Aperture Priority Mode)...................................................... 71
Shooting with a Set Aperture Value and Shutter Speed
(M: Manual Exposure Mode) ................................................... 72
Shooting with an Combined Aperture Value and Shutter Speed
(P: Program Shift Mode).......................................................... 74
Shooting with Custom Settings
(MY1, MY2: My Settings Mode)............................................... 76
Shooting Setting Menu ................................................................ 77
Using the Menu.......................................................................................79
Choosing Picture Quality Mode/Image Size
(PIC QUALITY/SIZE)............................................................... 80
Changing the Focusing Mode (FOCUS)...................................... 83
Manual Focus Shooting (MF)..................................................................84
Changing the Light Metering (AE METERING) ........................... 86
Shooting with Multi-Shot (CONT./S-CONT/M-CONT) ................. 87
Viewing an S-CONT or M-CONT Still Image in Enlarged
Display Mode ......................................................................................90
Setting the Picture Quality (IMG SET)......................................... 91
Customizing the Picture Quality (SETTING1, SETTING2) .....................92
Shooting Consecutively with Different Exposures
(AUTO BRACKET) .................................................................. 93
Shooting Consecutively with Different White Balance (WB-BKT)...........94
Shooting Pictures Automatically at Set Intervals (INTERVAL) .... 96
Shooting a Still Image with Sound (IMAGE WITH SOUND)........ 98
6
Inserting the Date into a Still Image (DATE IMPRINT)................ 99
Changing the Exposure (EXPOSURE COMP.)......................... 100
Using Natural and Artificial Lighting (WHITE BALANCE).......... 101
Setting the White Balance Manually (MANUAL SETTINGS)................103
Changing the Sensitivity (ISO SETTING).................................. 104
Using the Camera Shake Correction Function to Prevent
Camera Shake (CAMERA SHAKE COR).............................. 106
Returning the Shooting Setting Menu Settings to their Defaults
(RESTORE DEFAULTS) ....................................................... 108
2 Shooting/Playing Back Movies 109
3 Shooting Movies ..............................................................................109
Setting the Frame Rate (FRAME RATE) ..............................................110
Playing Back Movies.............................................................................112
3 Other Playback Functions 113
Playback Setting Menu.............................................................. 113
Using the Menu.....................................................................................113
Displaying Photos in Order Automatically (SLIDE SHOW) ....... 114
Write-Protecting Files (PROTECT)............................................ 115
Protecting a File ....................................................................................115
Protecting All Files ................................................................................116
Protecting Multiple Files at Once ..........................................................117
Using a Printing Service (DPOF)............................................... 118
Setting DPOF for the Displayed Still Image ..........................................118
Setting DPOF for All Still Images ..........................................................119
Setting DPOF for Multiple Still Images..................................................120
Changing the Image Size (RESIZE).......................................... 121
Copying the Contents of the Internal Memory to an
SD Memory Card (COPY TO CARD) .................................... 123
Straightening Skewed Images (SKEW CORRECTION)............ 124
Viewing on a Television............................................................. 126
4 Direct Printing 128
Direct Print Function .................................................................. 128
Connecting the Camera to a Printer .......................................... 129
Printing Still Images................................................................... 130
Printing One or All Still Images .............................................................130
Printing Several Still Images .................................................................132

7
5 Changing Camera Settings 134
SETUP Menu ............................................................................ 134
Using the SETUP Menu........................................................................135
Preparing the SD Memory Card (FORMAT [CARD]) ................ 137
Formatting the Internal Memory (FORMAT [INT. MEM.]).......... 138
Adjusting the Brightness of the LCD Monitor
(LCD BRIGHTNESS)............................................................. 139
Registering Custom Settings (REG. MY SETTINGS) ............... 140
Changing the Step Zooming Setting (STEP ZOOM) ................. 142
Changing the ISO AUTO-HIGH Setting (ISO AUTO-HIGH)...... 143
Changing the Auto Power Off Setting (AUTO POWER OFF) ... 144
Changing the Beep Sound Setting (BEEP SOUND) ................. 145
Changing the Beep Sound Volume (VOL. SETTINGS)............. 146
Changing Image Confirmation Time (LCD CONFIRM.) ............ 147
Assigning a Function to the ADJ. Lever (ADJ LEVER SET.) .... 148
Changing the Shutter Release Button Setting
(ADJ SHTR BTN SET) .......................................................... 149
Assigning a Function to the Function Button
(FNCTN. BTN. SET.)............................................................. 150
Changing the AF Auxiliary Light Setting (AF AUX. LIGHT) ....... 151
Changing the RAW Mode JPEG Image Setting
(RAW/JPEG SETTING)......................................................... 152
Using the Auto Resize Zoom (DIGITAL ZOOM IMG)................ 153
Displaying a Settings Change Warning
(SHTG STGS WARNG.)........................................................ 155
Enlarging Icon Display (ENLGE PHOTO ICON) ....................... 156
Changing the USB Setting (USB CONNECTION)..................... 157
Changing File Name Settings (SEQUENTIAL NO.) .................. 159
Setting the Date and Time (DATE SETTINGS)......................... 161
Changing the Display Language (LANGUAGE/N) ............... 162
Changing the Playback Method for Viewing on TV
(VIDEO OUT MODE)............................................................. 163

8
6 Downloading Images to Your Computer 164
For Windows ............................................................................. 164
Using the Caplio Software CD-ROM.....................................................165
System Requirements for Using Caplio Software CD-ROM .................169
Installing the Software Required for Handling the Camera and
Images ..............................................................................................170
Installing the DeskTopBinder Lite .........................................................173
Installing Other Software on Your Computer ........................................175
Uninstalling the Software ......................................................................176
Downloading Images to Your Computer ...............................................178
Downloading Images Without Using the Caplio Software.....................179
Using the Original Driver to Download Images .....................................181
Disconnecting the Camera from Your Computer ..................................183
For Macintosh............................................................................ 184
Downloading Images to Your Computer ...............................................184
Disconnecting the Camera from Your Computer ..................................185
7 Appendices 186
Troubleshooting......................................................................... 186
Error Messages.....................................................................................186
Camera Troubleshooting ......................................................................187
Software and Computer Troubleshooting .............................................193
Specifications ............................................................................ 195
Number of Images That Can be Stored in Internal Memory/
SD Memory Card ..............................................................................197
Optional Accessories................................................................. 198
Using the AC Adapter (sold separately)................................................199
Using the External Flash ........................................................... 201
Functions Whose Defaults are Restored When Camera is
Turned Off ............................................................................. 203
About Scene Mode .................................................................... 205
Shooting Setting Menu Items by Scene Mode......................................206
Using Your Camera Abroad ...................................................... 207
Cautions on Use ........................................................................ 208
Care and Storage ...................................................................... 209
Warranty and Servicing ............................................................. 210
Index ......................................................................................... 212

9
10
Basic
Operations
If you are using the
camera for the first time,
read this section.

Packing List...................................... 12
Camera System and Accessories
........................................................... 16
Names of Parts................................. 17
How to Use the Mode Dial ............... 19
How to Use the Up-down Dial and
ADJ. Lever ........................................ 20
LCD Monitor Display ....................... 22
Getting Ready .................................. 25
Basic Shooting................................. 36
Playing Back Images ....................... 51
Deleting Files ................................... 56
Changing the Display with the
DISP. Button ..................................... 59
Packing List

Open the package and make sure all the items are included.
Caplio GX100 Handstrap
The serial number of the camera is
If you are using the camera for the first time, read this section.

provided on the bottom face of the


camera.

Rechargeable Battery

Hot Shoe Cover Battery Charger


Included with the camera.

USB Cable
Used to connect the camera to a Lens Cap
computer or direct print- Lens Cap Strap
compatible printer.

AV Cable
Used to view your images on a TV.

12
Camera User Safety Caplio Software
Guide Precautions CD-ROM
The provided
software and the
“Software User
Guide” are included
on this CD-ROM.

If you are using the camera for the first time, read this section.
(This booklet)

Note ---------------------------------------------------------------------------------------------------
Attaching the handstrap to the camera
Thread the small end of the strap through the
strap eyelet on the camera and loop the ends
as shown.

Attaching the lens cap strap to the camera

About Caplio GX100 VF KIT-------------------------------------------------------------------


• Caplio GX100 VF KIT also comes with the following accessories.
• LCD Viewfinder (VF-1)
• Case
• VF-1 user guide
• Warranty

• Make sure the camera is off before attaching the LCD viewfinder.

13
Optional Accessories
AC Adapter (AC-4c) LCD Viewfinder (VF-1)
Used for power supply from a Caplio GX100 VF KIT is supplied
household outlet to the camera. with an LCD viewfinder (VF-1). For
Use this adapter for long periods of details on using the LCD
playback or when transferring viewfinder, see the documentation
If you are using the camera for the first time, read this section.

images to a computer. that came with the LCD viewfinder.

Rechargeable Battery (DB-60)

Wide Conversion Lens


(DW-6)
Battery Charger (BJ-6)

Cable Switch (CA-1)


Hood & Adapter (HA-2)

Neck Strap (GS-1)


ST-1 cannot be used.
Soft Case (SC-45)

14
Note ---------------------------------------------------------------------------------------------------
Attaching the neck strap and lens cap to the camera
Remove the end of the neck strap (GS-1) from the connector and attach it as shown in
the figure.

If you are using the camera for the first time, read this section.
Note ---------------------------------------------------------------------------------------------------
• For information on optional accessories, see P.198.
• For the latest information on optional accessories, see the Ricoh website (http://
www.ricohpmmc.com).
Removing/attaching the ring cap -----------------------------------------------------------
Remove the ring cap when using the wide conversion lens or hood & adapter.

Removing the ring cap Ring cap


With the ring cap removal button pressed, removal button
turn the ring cap counterclockwise (in the
direction of the arrow) while the camera
turned off and remove from the camera body.

Attaching the ring cap


With the camera turned off, align the marking
on the ring cap (2) with the marking on the
camera body (1) and turn the ring cap
clockwise until it clicks.

15
Camera System and Accessories

External Flash
If you are using the camera for the first time, read this section.

LCD Viewfinder Soft Case


(VF-1)* Attach to the (SC-45)
hot shoe.

Attach to the
hot shoe.
Neck Strap
(GS-1)
Remove the
ring cap before
attaching. Connect to the
USB terminal.

Hood & Adapter I 43 mm Cable Switch


(HA-2) (CA-1)
Filter
I 43 mm
Rechargeable Battery
(DB-60)
19-mm Wide (supplied)
Conversion Lens
(DW-6)

Battery Charger
(BJ-6)
(supplied)

AC Adapter
(AC-4c)

Optional Commercially
accessories available
* Caplio GX100 VF KIT is supplied with an LCD viewfinder (VF-1). For
details on using the LCD viewfinder, see the documentation that came with
the LCD viewfinder.
16
Names of Parts

Camera
Front View

If you are using the camera for the first time, read this section.
91 2 3 4 5 6 7 8 9 16

10
11
14

15

12 13
Item Name Refer to
1 Up-down Dial P.20
2 Mode Dial P.19
3 Shutter Release Button P.36
4 POWER Button P.32
5 Flash Cover P.44
6 Hot Shoe P.16, 198
7 F (Flash) OPEN Switch P.44
8 Fn (Function) Button P.67
9 Strap Eyelet P.13
10 Microphone -
11 AF Window -
12 Ring Cap Removal Button P.15
13 Lens P.36
14 AF auxiliary light P.50, 151
15 Ring Cap P.15
16 Flash P.44
17
Rear View
2
15 5 6

VF/LCD ADJ.
7
8
If you are using the camera for the first time, read this section.

9
1 3 4
10
11

16 14 13 12
17 18 19 20 21
Item Name Refer to
1 LCD Monitor P.22
2 Auto Focus/Flash Lamp P.38, 42
3 AV Output Terminal P.126
4 USB Terminal P.129, 178
5 VF/LCD Button P.59
6 ADJ. Lever P.64
7 z (Telephoto)/8 (Enlarged View) Button P.42, 53
8 Z (Wide-angle)/9 (Thumbnail Display) Button P.42, 53
9 !/MODE Button P.46
10 $/F (Flash) Button P.44
11 MENU/OK Button P.79, 113, 135
12 O (DISP.) Button P.59
13 "/N (Macro) Button P.43
14 #/Q (Quick Review) Button P.51
15 6 (Playback) Button P.52
16 D (Delete)/t (Self-timer) Button P.56, 50
17 Terminal Cover P.126, 129
18 Speaker P.112
19 Release Lever P.30, 199
20 Battery/Card Cover P.30, 199
21 Tripod Screw Hole P.195
18
How to Use the Mode Dial

Set the mode dial to the desired mode before shooting still images
or movies.

If you are using the camera for the first time, read this section.
Turn the mode dial to the symbol of the function
you want to use.

Mode Dial Symbols and Descriptions


Symbol Function Description
Automatically sets the optimal aperture
5 Auto Shooting Mode value and shutter speed depending on
the subject.
Allows you to adjust the combination of
P Program Shift Mode
aperture value and shutter speed.
Allows you to set the aperture value, and
A Aperture Priority Mode then the camera automatically sets the
optimal shutter speed.
Allows you to manually set the aperture
M Manual Exposure Mode
value and shutter speed.
Allows you to shoot with settings
SCENE Scene Mode
optimized for the shooting scene.
3 Movie Mode Allows you to shoot movies with sound.
Allows you to shoot using the settings
MY1, MY2 My Settings Mode
registered in [REG. MY SETTINGS].

19
How to Use the Up-down Dial
and ADJ. Lever
You can use the up-down dial Up-down Dial
and ADJ. lever to easily
perform various operations
If you are using the camera for the first time, read this section.

that are usually done using the


!"#$ buttons.
You can rotate the Up-down
dial as shown here.
You can press the ADJ. lever
to the left and right and press
the center. ADJ. Lever

You can use the up-down dial and ADJ. lever to perform the
following operations.
Description
Mode/Display Refer to
Up-down Dial ADJ. Lever
Select ADJ. mode - Press the center to select P.64
ADJ. mode.
ADJ. mode Same as !" buttons • Push to the left and P.64
right: Same as #$
buttons.
• Press to set: Same as
MENU/OK button.
Aperture Priority Mode Allows you to change the - P.71
(A) aperture value.
Manual Exposure Allows you to change the Allows you to change the P.72
Mode (M) aperture value. shutter speed.
Program Shift Mode (P) Allows you to adjust the - P.74
combination of aperture
value and shutter speed.
Shooting Setting/ Same as !" buttons Same as #$ buttons P.77,
Playback Setting/ 113, 134
SETUP Menu
Scene Mode (Scene Same as !" buttons - P.46
Mode selection screen)

20
Description
Mode/Display Refer to
Up-down Dial ADJ. Lever
Playback Mode Same as #$ buttons Same as #$ buttons P.52
(Normal playback
screen)
Playback Mode Same as #$ buttons Same as #$ buttons P.53
(Three-frame view)

If you are using the camera for the first time, read this section.
Playback Mode Same as !" buttons Same as #$ buttons P.53
(Grid view)
Playback Mode Allows you to change the Displays the previous or P.55
(Enlarged view) display magnification. next image.
(When displaying the
previous or next image
during enlarged view, the
image is displayed at
normal magnification
(100%).)

21
LCD Monitor Display

Example of LCD Monitor Display when Shooting Pictures


1 2 3 4 5 6 7 8 9 27
If you are using the camera for the first time, read this section.

INTERVAL 18
28
19 29
10 20

21

22
23 SHTR BTN : START
11 12 13 14 15 16 17
Movie Mode

24
F3.3 25
1/15 26

Still Image Mode

Item Name Refer to Item Name Refer to


1 Flash P.44 16 ISO Setting P.104
2 Macro Shooting P.43 17 Date Imprint P.99
3 Self-timer P.50 18 Focus P.83
4 Scene Modes P.46 19 AE Lock P.70
5 Mode Types P.19, 46 20 Interval P.96
6 Recording Destination P.27 21 Histogram P.61
7 Remaining Number of P.197 22 Camera Shake Correction P.106
Still Images
8 Picture Quality P.80 23 Battery Mark P.24
9 Image Size P.80 24 Camera Shake Warning Mark P.37
10 Zoom Bar P.42 25 Aperture Value P.195
11 White Balance P.101 26 Shutter Speed P.72, 74
12 AE Metering P.86 27 Frame Rate P.110
13 Auto Bracket P.93 28 Remaining Recording Time P.197
14 Image Settings P.91 29 Recording Time P.197
15 Exposure Compensation P.100
22
Note ---------------------------------------------------------------------------------------------------
• The number of remaining shots available may differ from the actual number of shots,
depending on the subject.
• Movie recording time and the maximum number of still pictures may vary depending
on the capacity of the recording destination (internal memory or SD memory card),
shooting conditions, and the type and manufacturer of the SD memory card.
• When the number of remaining shots is 10,000 or more, “9999” is displayed.

If you are using the camera for the first time, read this section.
Example of LCD Monitor Display During Playback
1 2 3 4 5 6 13

8, 9
10

11
2007/04/01 12:00 12 14 2007/04/01 12:00

Still Image Mode Movie Mode

Item Name Refer to Item Name Refer to


1 Protect P.115 8 Picture Quality P.80
2 DPOF P.118 9 Image Size P.80
3 Mode Types - 10 File No. -
4 Playback Data Source P.52 11 Battery Mark P.24
5 Number of Playback - 12 Date at Shooting P.99,
Files 161
6 Total Number of Files - 13 Recording Time or Lapsed -
Time
7 Setting at Shooting - 14 Indicator -
(Recording)

Note ---------------------------------------------------------------------------------------------------
The LCD monitor may display messages to inform you of operational instructions or the
camera’s status while in use.

23
Battery Level Indication
A battery mark appears at the lower right of the LCD monitor to
indicate the battery level. Recharge the battery before it is depleted.

Battery Mark Description


The battery is sufficiently charged.
If you are using the camera for the first time, read this section.

Green
The battery level begins to drop. Recharging the battery or exchanging with
new batteries is recommended.
Green
The battery level is low. Recharge the battery or exchange with new
batteries.
Orange

Caution-----------------------------------------------------------------------------------------------
• If you are using AAA nickel-hydrogen batteries or AAA Oxyride batteries, depending
on the type of batteries and usage conditions, may not appear, or or
may instantaneously appear. Check your batteries beforehand.
• If you are using the AC adapter, may appear. This does not indicate a
malfunction and you can continue to use the camera.

24
Getting Ready
Turn the power on and get ready to shoot.
Note ---------------------------------------------------------------------------------------------------
• If you have already used this camera, make sure it is turned off before inserting or
removing the battery.

If you are using the camera for the first time, read this section.
• For information on how to turn the camera off, see P.32.

About the Battery


Rechargeable Battery DB-60 (supplied)
This is a lithium-ion battery. It is economical
because you can recharge it using the battery
charger and use it over and over again. The
battery lasts a long time, so it is convenient
when traveling.

Note ---------------------------------------------------------------------------------------------------
You can also use the following types of batteries.
• AAA Alkaline Batteries (available in stores)
You can obtain them anywhere, so they are convenient for travel.
However, in a low-temperature environment, the number of shots you can take will
decrease. Warm the batteries before use. It is recommended that you use the
rechargeable battery when using the camera for a long time.
• AAA Oxyride Batteries (available in stores)
These are not rechargeable batteries, but they can be used longer in a digital camera
than AAA alkaline batteries.
• AAA Nickel-Hydrogen Batteries (available in stores)
These batteries are economical because you can recharge and reuse them over and
over again. Please use a battery charger available in stores.

25
Number of shots you can take ---------------------------------------------------------------
• Approximate number of shots you can take on a single battery charge

Number of Shots
Battery Type
(Normal Mode)
Rechargeable Battery (DB-60) Approx. 340*1
AAA Alkaline Batteries (available in stores) Approx. 30*2
If you are using the camera for the first time, read this section.

*1 Approximately 290 shots can be taken when using the LCD viewfinder.
*2 Approximately 25 shots can be taken when using the LCD viewfinder.
• Based on CIPA standard (Temperature: 23 degrees Celsius, LCD monitor on, 30
seconds between shots, changing the zoom setting from telephoto to wide-angle or
wide-angle to telephoto for each shot, 50% flash usage, turning the power off after
each 10 shots).
• The number of shots when using AAA alkaline batteries is based on the use of AAA
alkaline batteries manufactured by Matsushita Battery Industrial Co., Ltd.
• The number of shots is for reference only. If the camera is used for long periods of
time for setting and playback, the shooting time (the number of shots) will decrease.
Caution-----------------------------------------------------------------------------------------------
• The nickel-hydrogen batteries available in stores are not factory-charged. Charge
them before use.
• The nickel-hydrogen batteries may be inert and consequently may not supply power
immediately after they are purchased or when left unused for more than a month. In
such a case, recharge the batteries two or three times before use. The batteries self-
discharge with time even if the camera is not used, so recharge them before use.
• The life of an AAA alkaline battery depends on the brand and the storage time from
the date of production. In addition, the life of an alkaline battery becomes shorter at
low temperatures.
• Other batteries, such as manganese dry cell and Ni-Cd batteries, cannot be used.
• The battery may become very hot immediately after operation. Turn the camera off
and leave it to cool down sufficiently before removing the battery.
• Please remove the batteries if you are not going to use the camera for a long period
of time.
• When using a lithium-ion battery, use only the specified rechargeable lithium-ion
battery (DB-60). Do not use other rechargeable lithium-ion batteries.

26
SD Memory Card (available in stores)
You can store still images you have taken either in the camera’s
internal memory or on an SD memory card (available in stores).
The internal memory capacity is 26 MB.
To record a lot of still images or movies at high resolutions, use a
high-capacity SD memory card.

If you are using the camera for the first time, read this section.
Where images are recorded-------------------------------------------------------------------
When no SD memory card is loaded, the camera records images to the internal
memory; when an SD memory card is loaded, it records images to the SD memory
card.

When no SD memory card is loaded When an SD memory card is loaded

Records to the internal memory Records to the SD memory card

Caution-----------------------------------------------------------------------------------------------
• If an SD memory card is loaded, the camera does not record to the internal memory,
even if the card is full.
• Take care not to get the contacts of the card dirty.

Write-protecting your images ----------------------------------------------------------------


Move the write-protection switch on the SD memory card to
LOCK to prevent your still images from being accidentally erased
or the card from being formatted. If you unlock the card (by
returning the switch to its original position), it is once again
possible to erase images and format the card.
It is recommended to move the write-protection switch to LOCK
when you have some important data recorded.
Note that you cannot shoot images on a locked card because no
data can be recorded to the card. Unlock the card before shooting.

27
Note ---------------------------------------------------------------------------------------------------
• For information on switching between the SD memory card and internal memory
during playback, see P.52.
• Movie recording time and the maximum number of still pictures varies depending on
the capacity of the SD memory card. (GP.197)
• Before using a new SD memory card, be sure to format it with this camera.
(GP.137)
• When using an SD memory card previously used with another camera, be sure to
If you are using the camera for the first time, read this section.

back up any necessary data on the card before formatting it. (GP.137)
• SDHC memory card (4 GB) can also be used.

28
Charging the Rechargeable Battery
The rechargeable battery needs to be charged before use. The
battery is not charged at the time of purchase.

1 Insert the battery into the battery charger, making

If you are using the camera for the first time, read this section.
sure that the and markings on the battery
match those on the battery charger.
• The battery label should face up.
Caution-----------------------------------------------------------------------------------------------
Be careful not to reverse the and sides.

2 Plug the battery charger into an outlet.


• Use the battery charger (BJ-6) to recharge the battery.
• Charging starts, and the charger lamp indicates the progress, as
shown below. Once charging has finished, unplug the battery
charger from the power outlet.

Charger Lamp Description


Lit Charging started
Off Charging complete
Flashing Battery charger or battery may be faulty (unplug the battery
charger from the power outlet and remove the battery from the
battery charger).
• Depending on the battery level, the charging time differs.
Rechargeable battery charging time
DB-60 About two hours (25°C)
29
Loading the Battery and SD Memory Card
The rechargeable battery (DB-60) can be used to power this
camera. This battery is convenient because the battery power
lasts long and it can be used over and over again by recharging.
If you have already used this camera, make sure it is turned off
before loading the battery and card.
If you are using the camera for the first time, read this section.

1 Slide the release lever toward


OPEN to open the battery/ 1
card cover.

2
2 Make sure the SD memory
card is facing the right way
and then push the card all the
way in until it clicks.
• The rechargeable battery may be
inserted first.

3 Insert the rechargeable


battery.
• Press the latch with the battery and
insert the battery all the way into the
battery compartment.
• When the rechargeable battery is
loaded in place, it is locked with the
latch.

4 Close the battery/card cover


and slide the release lever in
the opposite direction of
OPEN to lock it in place. 1
2

30
Loading AAA Alkaline Batteries
(Available in Stores)
Insert the batteries in the direction
shown.

Close the battery/card cover by sliding

If you are using the camera for the first time, read this section.
the release lever while pressing close the
battery/card cover with your finger.

Removing the SD Memory Card


Slide the release lever toward OPEN to open the battery/card
cover. Push in the SD memory card and gently release to eject it.
Pull the card out of the camera.

Removing the Rechargeable Battery


Slide the release lever toward OPEN to open the battery/card
cover. Press and release the latch. The battery is ejected. Pull the
battery out of the camera. Be careful not to drop the battery when
removing it from the camera.

Removing the AAA Alkaline Batteries


Slide the release lever toward OPEN to open the battery/card
cover, and then remove the alkaline batteries. Be careful not to drop
the alkaline batteries when removing them from the camera.

Caution-----------------------------------------------------------------------------------------------
• When closing the battery/card cover, slide the release lever and be sure to lock it in
place.
• Remove the batteries if you are not going to use the camera for a long period of time.
Store the removed batteries in a dry cool place.

31
Turning the Power On/Off
To turn the power on:

1 Press the tabs on both sides


of the lens cap, and remove
If you are using the camera for the first time, read this section.

the lens cap.

2 Press the POWER button.


• After the start sound, the auto
focus/flash lamp blinks for several
seconds.

Using the Camera in Playback


Mode
• Pressing the 6 (Playback) button
for more than one second turns on
the camera in playback mode,
allowing you to start playback at
once.
• When the camera is turned on with
the 6 (Playback) button, pressing
the 6 (Playback) button again switches playback mode to
recording mode.

32
To turn the camera off:

1 Press the POWER button.

If you are using the camera for the first time, read this section.
2 Press the tabs on both sides
of the lens cap, and attach
the lens cap to the camera
lens.

Caution-----------------------------------------------------------------------------------------------
• Remove the lens cap before turning on the camera. If you turn on the camera before
removing the lens cap, a message is displayed. Follow the message instruction to
operate.
• After the camera is turned on, it may takes longer for the camera to become ready
for shooting when using the flash than when not using the flash.
Auto power off-------------------------------------------------------------------------------------
• If the camera goes unused for a set period of time, it automatically turns itself off to
save power. (Auto Power Off)
• The auto power off setting can be changed. (GP.144)

33
Setting the Language
When the power is turned on for the first time, the language
setting screen appears (for the LCD monitor display language).
After setting the language, go on to the date/time setting (for
printing the date and time on your photos).
You can shoot without these settings. However, be sure to set the
If you are using the camera for the first time, read this section.

language, and the date/time later. Use the SETUP menu for these
settings.

1 Turn the power on for the first time after purchase.


• The language selection screen appears.
• To skip language setting, press the MENU/OK button.
• When the MENU/OK button is pressed, the language setting is
cancelled and the video signal format-setting screen appears.

2 Press the !"#$ buttons to


select a language.

3 Press the MENU/OK button.


• The display language is set, and
the date/time setting screen
appears.
Note ---------------------------------------------------------------------------------------------------
For how to set the display language and date/time on the SETUP menu, see “Changing
the Display Language (LANGUAGE/N)” (P.162) and “Setting the Date and Time
(DATE SETTINGS)” (P.161) in this guide.

34
Setting the Date and Time
When the power is turned on for the first time, the date/time
setting screen appears.

1 Press the !"#$ buttons to

If you are using the camera for the first time, read this section.
set the year, month, date and
time.
• Change the value with !" and
move the frame with #$.

2
Setting at shipping
In [FORMAT], choose the
date and time format.
• Select the date and time format
with !".

3 Check the information on


the screen and then press
the MENU/OK button.
• The date is set.
• Pressing the DISP. button on this screen allows you to cancel
the setting.
Note ---------------------------------------------------------------------------------------------------
• If the battery is removed for more than one week, the date and time settings will be
lost. These settings must be made again.
• To retain the date and time settings, load a battery with adequate remaining power
for more than two hours.
• The set date and time can be changed later. (GP.161)
• The date and time can be inserted into images. (GP.99)

35
Basic Shooting
Now you are ready.

Holding the Camera


If you are using the camera for the first time, read this section.

Hold the camera as shown below for best results.

1 Hold the camera with both


hands and lightly press both
elbows against your body.

2 Put your finger on the shutter


release button.

Caution-----------------------------------------------------------------------------------------------
When you are shooting, be careful not to obstruct the lens or flash with your fingers,
hair, or the strap.

36
Preventing camera shake----------------------------------------------------------------------
If you move the camera when pressing the shutter release button, the still image might
not come out clearly due to camera shake.
Camera shake tends to occur in the following cases:
• When shooting in a dark place without using the flash
• When using the zoom function
• When shooting with a long exposure time (GP.72)

If you are using the camera for the first time, read this section.
When the J symbol appears on the LCD monitor, this indicates that camera shake
may occur. To prevent camera shake, try any of the following.
• Using the camera shake correction function (GP.106)
• Setting the flash to [AUTO] or [FLASH ON] (GP.44)
• Raising the ISO setting (GP.104)
• Using the self-timer (GP.50)

37
Shooting
The shutter release button works in two steps. You can press the
shutter release button halfway down (half-press) and press it all
the way down (full-press).

Quickly Shooting Pictures (Full-press)


If you are using the camera for the first time, read this section.

Full-press the shutter release button for quick focusing, so as not to


miss a shooting opportunity.

1 Press the POWER button to turn the


camera on, and turn the mode dial to
5.

2 Compose your shot by looking at the LCD monitor,


make sure the subject is centered, and gently press
the shutter release button fully.

• The still image you have taken appears momentarily on the LCD
monitor and is recorded to the internal memory or SD memory
card.
Caution-----------------------------------------------------------------------------------------------
Full-press is likely to cause the camera to shake. Hold the camera firmly with both
hands and shoot. Turning the camera shake correction function on minimizes blurring
due to camera shake. (GP.106)
Note ---------------------------------------------------------------------------------------------------
You can set the time the still image you have taken appears on the LCD monitor. You
can also set the image not to appear after it is taken. (GP.147)
38
Checking the Focus and Shooting (Half-press/
Focus Lock)
When you press the shutter release button halfway (Half-press), the
auto-focus function is triggered to determine the focal distance.
Next, press it all the way down (Full-press) to shoot. When your
subject is not in the center of your composition, compose your photo
after focusing. (Focus Lock)

If you are using the camera for the first time, read this section.
1 Press the POWER button to turn the
camera on, and turn the mode dial to
5.

2 Put the subject of your photo in the center of the


screen and press the shutter release button
halfway.

• The camera focuses on the Auto Focus/


subject and the exposure and Flash Lamp
white balance are fixed.
• If automatic focusing fails, the
frame in the center of the LCD
monitor flashes red and the auto
focus/flash lamp blinks green.
• The focal distance is measured at
a maximum of five points. Green
frames appear to indicate the
Frame
positions that are in focus.

39
3 To take a picture with the subject in the foreground
in focus against a background, half-press the
shutter release button to focus on the subject, and
then compose your shot.
Subject to be focused on
If you are using the camera for the first time, read this section.

Shooting range

4 Gently press the shutter


release button all the way.
• The still image you have taken
appears momentarily on the LCD
monitor and is recorded to the
internal memory or SD memory
card.

Focusing---------------------------------------------------------------------------------------------
• The color of the frame in the center of the LCD monitor and the auto focus/flash lamp
indicate whether the subject is in or out of focus.
Focus Status Frame Color Auto Focus/Flash Lamp
Before focusing White Off
Subject in focus Green Lights (green)
Subject not in focus Flashes (red) Blinks (green)
• It may be impossible to bring the following subjects into focus.
• Subjects lacking contrast (the sky, a white wall, the hood of a car, etc.)
• Flat two-dimensional objects with only horizontal lines and no significant
protrusions.
• Quickly moving objects.
• Things in poorly lit places.
• Areas with strong backlighting, or reflections.
• Things that flicker, such as fluorescent lights.
When you want to shoot subjects like this, first focus on an object the same distance
as your subject and then shoot.
40
Note ---------------------------------------------------------------------------------------------------
• Press the shutter release button gently to prevent camera shake.
• The J symbol indicates that camera shake may occur. Hold the camera still and
focus the camera again. You can also turn on the camera shake correction function
to minimize blurring. (GP.106)
• The flash fires a pre-flash to increase the AE accuracy.

If you are using the camera for the first time, read this section.

41
Using the Zoom Function
Pressing the z (Telephoto) button allows you to take a close-up
picture of the subject.
Pressing the Z (Wide-angle) button allows you to take a wide-
angle picture.
If you are using the camera for the first time, read this section.

Wide-angle Telephoto

1 With the camera ready to


shoot, press the z
(Telephoto) or Z (Wide-
angle) button.
• You can check the zoom status on
the zoom bar of the LCD monitor.

2 Compose your picture and


half-press the shutter
release button.

3 Full-press the shutter


release button.

Using the Digital Zoom -------------------------------------------------------------------------


Digital zooming enables you to enlarge the subject more than the maximum
magnification of the optical zoom (3.0×) specified by pressing the z (Telephoto)
button (up to 4.0×).
To use digital zooming, press and hold the z (Telephoto) button until the maximum
magnification is reached on the zoom bar, then momentarily release the button, and
then press the z (Telephoto) button again.
You can also set [DIGITAL ZOOM IMG] to [AUTO RSZ]. (GP.153)
This function is not available when [PIC QUALITY/SIZE] is set to RAW mode.
(GP.80)
42
Shooting Close-Ups (Macro Shooting)
Using the N (Macro) button allows you to take a tight close-up of
the subject. (Macro shooting)
This is good for shooting small subjects because you can shoot up
to approximately 1cm (0.4in.) away from the front edge of the lens.

If you are using the camera for the first time, read this section.
1 With the camera ready to
shoot, press the N (Macro)
button.
• N is displayed momentarily at the
center of the LCD monitor and
then N is displayed at the top of
the screen.

2 Compose your picture and half-press the shutter


release button.

3 Full-press the shutter


release button.
• To cancel macro mode, press the
N (Macro) button again.

Note ---------------------------------------------------------------------------------------------------
• When using the zoom, you can shoot close-ups within the following distances:
Distance Shooting Range
Wide-Angle Approx. 1 cm Approx. 29 mm × 22 mm
(from the front edge of the lens)
Telephoto Approx. 4 cm Approx. 25 mm × 19 mm
(from the front edge of the lens) (when digital zoom is not used)
Approx. 6.3 mm × 4.0 mm
(when 4.0× digital zoom is used)
• The AF target shift function enables you to lock the focus for macro shooting with the
simple touch of a button without moving the camera. This function is useful for
shooting on a tripod. (GP.66)
• To take a further close-up picture during macro shooting, use [ZOOM MACRO] in
scene mode. (GP.47)
43
Using the Flash
To use the flash, slide the F (Flash) OPEN switch to the outside
to raise the flash cover and open the flash. The flash does not fire
if it is not open.
With the flash open, press the F (Flash) button to change the flash
mode. The default setting is [AUTO] when the flash is open.
If you are using the camera for the first time, read this section.

From the front edge of the lens, the flash light reaches about 0.2
to 5.0 m (7.9 in. to 16.4 ft.) (Wide-angle) or about 0.15 to 3.0 m
(5.9 in. to 9.8 ft.) (Telephoto) when the ISO setting is set to
[AUTO].

Flash Modes

FLASH OFF The flash will not fire.

AUTO The flash fires automatically when the subject is poorly lit
or backlit.
RED-EYE FLASH Reduces the red-eye phenomenon, in which people’s
eyes appear red in pictures.
FLASH ON The flash fires regardless of the lighting conditions.

FLASH SYNCHRO. The flash fires with the shutter speed slowed. This is
useful when taking portrait pictures in a nightscape.
Camera shake may occur, so the use of a tripod is
recommended.
SOFT FLASH Reduces the amount of light fired by the flash. This is
useful when using macro shooting to shoot close-ups.

1 Slide the F (Flash) OPEN


switch to the outside to raise
the flash cover.

2 Turn the mode dial to 5.

44
3 Press the F (Flash) button to
change the flash mode.
• The flash mode mark is displayed
momentarily at the center of the
LCD monitor and then a smaller
mark is displayed at the upper left
of the screen.

If you are using the camera for the first time, read this section.
• The auto focus/flash lamp blinks
while the flash charges. Once the
flash is charged, the lamp turns off and the camera is ready to
shoot.

Note ---------------------------------------------------------------------------------------------------
• When you are finished using the flash, press the center of the flash cover down with
your finger.
• The flash mode setting is saved until you press the F (Flash) button again.
• The flash does not fire when shooting movies or in multi-shot mode.
• When using AAA alkaline batteries, Oxyride batteries, or nickel-hydrogen batteries,
the LCD monitor turns off when the flash is charging.
• The flash fires a pre-flash to increase the AE accuracy.
• You cannot use the internal flash when using the external flash. (GP.201)
Caution-----------------------------------------------------------------------------------------------
• You cannot use the internal flash when using the wide conversion lens or hood.
• To use the internal flash with the LCD viewfinder attached, reposition the angle of the
LCD viewfinder.

45
Shooting with Optimal Settings According
to Shooting Conditions
You can use scene mode to select from among eight still image
modes and shoot with settings automatically optimized for
shooting conditions.
If you are using the camera for the first time, read this section.

Scene Modes
Use when taking portrait pictures.

PORTRAIT
Use when taking pictures of moving objects.

SPORTS
Use when taking scenery pictures with abundant greenery or blue sky.

LANDSCAPE
Use when shooting night scenes.
You can also shoot with night scenes with people in the frame.
NIGHTSCAPE In Nightscape Mode, the flash fires when all of the following conditions
are satisfied: (When the flash is open)
• The flash is set to [AUTO].
• The flash is determined to be necessary because it is dark.
• There is a figure or another object nearby.
Use to straighten a rectangular object, such as a message board or
business card, shot at an angle to make it look as if it were shot squarely.
SKEW COR For detailed operations, see P.48.
MODE

In skew correction mode, select [N1280] or [N640] for [PIC QUALITY/


SIZE]. (GP.80)
Use when capturing text images, for example notes written on a
whiteboard at a meeting. Images are captured in black and white.
TEXT MODE You can also change the shading of text. (GP.65)
You can set the image size to either 3648 × 2736 or 2048 × 1536 pixels.
(GP.80)

46
Use when taking a further close-up picture during macro shooting. Using
the digital zoom allows you to take a larger close-up than with normal
ZOOM MACRO macro shooting. For detailed operations, see P.49.
The optical zoom cannot be used in this mode.
Use when taking pictures in dimly lit places. The LCD monitor also
becomes brighter.
HIGH SENS

If you are using the camera for the first time, read this section.
Note ---------------------------------------------------------------------------------------------------
For information on shooting setting menu items and function restrictions in scene
mode, see “Appendices”. (GP.205)

1 Turn the mode dial to


SCENE.

• The camera is ready to shoot and


the selected scene mode is
displayed at the top of the LCD
monitor.

2 Press the MODE button to


change the scene mode.
• The scene mode selection screen
appears.

3 Press the !" buttons to


select the scene mode.

4 Press the MENU/OK button.


• The scene mode type is displayed
at the top of the LCD monitor.

5 Press the shutter release


button to shoot the picture.

47
Returning to Normal Shooting Mode
1 Turn the mode dial to 5.

Using the Skew Correction Mode


1 Turn the mode dial to SCENE.
• The camera is ready to shoot and the selected scene mode is
displayed at the top of the LCD monitor.
If you are using the camera for the first time, read this section.

2 Press the MODE button.


• The scene mode selection screen appears.
3 Press the !" buttons to select [SKEW COR MODE].
4 Press the MENU/OK button.
5 Press the shutter release button to shoot the picture.
• The display indicates that the image is being processed, and
then the area recognized as the correction range is displayed
with an orange frame. Up to five areas can be recognized.
• If the target area cannot be detected, an error message appears.
The image before correction remains recorded.
• To select another correction area, move the orange frame to the
target area by pressing the $ button.
• To cancel skew correction, press the ! button. Even if you
cancel skew correction, the image before skew correction
remains recorded.
6 Press the MENU/OK button.
• The display indicates that the image is being corrected, and then
the corrected image is recorded. The image before correction is
also recorded.
Caution-----------------------------------------------------------------------------------------------
When [SKEW COR MODE] is selected, note the following:
• To shoot the subject as large as possible, position it so that the entire portion of the
subject is visible on the LCD monitor.
• The camera may fail to recognize the subject in the following cases:
• When the image is out of focus
• When four edges of the subject are not clearly visible
• When it is hard to distinguish between the subject and background
• When the background is complicated
• Two images, one before correction and the other after correction, are recorded. If the
number of remaining shots is less than two, you cannot shoot the subject.
• When [SKEW COR MODE] is selected, the digital zoom is activated even when
[AUTO RSZ] is set to [DIGITAL ZOOM IMG] on the SETUP menu.
48
Note ---------------------------------------------------------------------------------------------------
• You can also correct the skew of a previously shot still image. (GP.124)
• For images shot in RAW mode (GP.80), the skew is corrected in the JPEG file
recorded at the same time as the raw data. No skew is corrected in the DNG file.

Shooting in Zoom Macro Mode


1 Turn the mode dial to SCENE.

If you are using the camera for the first time, read this section.
• The camera is ready to shoot and the selected scene mode is
displayed at the top of the LCD monitor.
2 Press the MODE button.
• The scene mode selection screen appears.
3 Press the !" buttons to select [ZOOM MACRO].
4 Press the MENU/OK button.
5 With the camera ready to shoot, press the z
(Telephoto) or Z (Wide-angle) button.
• The zoom level appears on the LCD monitor.
6 Compose your picture and half-press the shutter
release button.
7 Full-press the shutter release button.

Caution-----------------------------------------------------------------------------------------------
• You can shoot close-ups within the following distances:
About Shooting range: Approx. 17 mm × 13 mm (when digital zoom is not used)
1cm Shooting range: Approx. 4.2 mm × 3.2 mm (when 4.0× digital zoom is used)
• When [DIGITAL ZOOM IMG] is set to [AUTO RSZ], the auto resize zoom is activated.
(GP.153)

49
t Using the Self-Timer
You can set the Self-timer to shoot after either two or ten seconds.
A setting of two seconds is useful for preventing camera shake.

1 Turn the mode dial to 5.


If you are using the camera for the first time, read this section.

2 Press the t (Self-timer)


button.
• The Self-timer symbol appears on
the screen.
• The [10] to the right of the symbol
indicates the number of seconds.
In this case, if you press the
shutter release button, the camera
shoots after 10 seconds.
• Each press of the t (Self-timer) button changes the self-timer
setting in the following order: 10sec, 2sec, and Self-timer Off.

3 Press the shutter release button.


• The focus is locked, and the AF auxiliary light lights when the
self-timer starts.
Note ---------------------------------------------------------------------------------------------------
• The camera remains in self-timer mode even after the image is shot. To cancel the
self-timer, press the t (Self-timer) button and change the self-timer setting to
[SELF-TIMER OFF].
• When the self-timer is set to 2 seconds, the AF auxiliary light does not light.

50
Playing Back Images

Reviewing the Image You Just Took


(Quick Review)

If you are using the camera for the first time, read this section.
You can view the image you just took on the LCD monitor. If you
are not pleased with the way the photo came out, you can delete
it then and there.

1 In shooting mode, press the


Q (Quick Review) button.
• The last image you took is
displayed on the LCD monitor.

In Quick Review
Q Button Returns to shooting mode.
8 Button Enlarges the displayed still image.
You can move the displayed still image by pressing the !"#$
buttons.
9 Button Reduces the displayed still image enlarged by pressing the 8
button.
MENU/OK Enlarges at maximum magnification the displayed still image
Button enlarged by pressing the 8 button.
Pressing this again returns the still image to its original size.
D Button Deletes the currently displayed file. When the D button is pressed,
a warning message about deleting the file appears. Select
[DELETE] and press the MENU/OK button.
DISP. Displays the white saturation highlights display screen. Press the
Button DISP. button again to display the quick review screen.

Note ---------------------------------------------------------------------------------------------------
• Once the power is turned off, the image you took cannot be displayed in shooting
mode even if you press the Q (Quick Review) button.
• If you use Quick Review to view the image taken in [TEXT MODE] of scene mode
(GP.46), the displayed image may have a slightly lower quality than the recorded one.
51
Viewing Your Images
In playback mode, you can check still images you have taken. You
can also delete or zoom in on the images.

1 Press the 6 (Playback) button.


If you are using the camera for the first time, read this section.

• The camera switches to playback


mode and the last still image you
took is displayed.
• You can view your pictures in
order by using the #$ buttons.
• To switch the camera from
playback mode to shooting mode,
press the 6 (Playback) button again.

2007 / 04 / 01 2007 / 04 / 01 2007 / 04 / 01

To previous image To next image


Caution-----------------------------------------------------------------------------------------------
When shooting with [PIC QUALITY/SIZE] set to RAW mode (GP.80), a JPEG file
associated with the DNG file is recorded at the same time. If the JPEG file is deleted
on a computer, for example, a thumbnail of the DNG file can be displayed, but the
thumbnail cannot be enlarged.
Note ---------------------------------------------------------------------------------------------------
• When playing back an image (RAW3648/RAW3:2) shot with [PIC QUALITY/SIZE]
set to RAW mode, the JPEG file recorded at the same time as the DNG file is
displayed. A symbol appears on the screen indicating RAW mode.
• When the LCD viewfinder is attached to the camera, pressing the 6 (Playback)
button displays the image on the LCD monitor of the camera. Pressing the 6
(Playback) button again displays the image on the LCD viewfinder.
Turning on the camera in playback mode------------------------------------------------
When the camera is off, pressing the 6 (Playback) button for more than one second
turns the camera on. (The camera starts up in playback mode.)
When the camera has been turned on with the 6 (Playback) button, pressing the 6
(Playback) button again switches playback mode to shooting mode.
Where images are played back from-------------------------------------------------------
When no SD memory card is loaded, the camera plays back from the internal memory.
When an SD memory card is loaded, it plays back from the SD memory card.
52
Three-frame View/Grid View
(Thumbnail Display)
When playing back images on the LCD monitor, the playback
screen can be divided into three frames (three-frame view) or 12
frames (grid view). The three-frame view and grid view allow you
to select a still image to enlarge or delete.

If you are using the camera for the first time, read this section.
The playback screen changes as follows:

2007 / 04 / 01

1 Press the 6 (Playback)


button.
• The last image you took is
displayed.

2 Press the 9 (Thumbnail


Display) button.

• The screen changes to three-


frame view. The large frame at the
center of the screen displays the
currently selected still image.

53
3 Press the 9 (Thumbnail Selected still image
Display) button again during
three-frame view.
• The screen is divided into 12
frames.
If you are using the camera for the first time, read this section.

Switching to Single-Picture Display


In three-frame view
1 Press the #$ buttons to select a still image.
2 Press the 8 (Enlarged View) button or the MENU/
OK button.

In grid view
1 Press the !"#$ buttons to select a still image.
2 Press the 8 (Enlarged View) button twice.

Note ---------------------------------------------------------------------------------------------------
If any of the following operations is performed in the three-frame view, the display
returns to the ordinary playback screen (single-picture display) and the operation is
executed.
• Deletion (GP.56)
• Menu display (GP.113)
• Movie playback (GP.112)

54
Magnifying Images
You can enlarge a still image displayed on the LCD monitor.

Image Size Enlarged View (maximum magnification)


3648 × 2736, 3648 × 2432, 2736 × 2736, 16 times

If you are using the camera for the first time, read this section.
3264 × 2448, 2592 × 1944, 2048 × 1536
1280 × 960 6.7 times
640 × 480 3.4 times

1 Press the 6 (Playback) button.


• The last image you took is displayed.

2 Press the #$ buttons to display the still image you


want to enlarge.

3 Press the 8 (Enlarged View)


button.
• The still image is enlarged.

In Enlarged View
8 Button Enlarges the displayed still image.
You can move the displayed still image by pressing the !"#$
buttons.
9 Button Returns the enlarged still image to its original size.
MENU/OK Pressing this in enlarged view displays the still image at the
Button maximum magnification.
Pressing this again returns the still image to its original size.

Note ---------------------------------------------------------------------------------------------------
• Enlarged view is also available in the quick review mode.
• Movies cannot be enlarged.

55
Deleting Files
You can delete unwanted or failed files from the SD memory card
or internal memory.

Deleting a File
If you are using the camera for the first time, read this section.

1 Press the 6 (Playback)


button.

2 Press the #$ buttons to


display the file you want to
delete.

3 Press the D (Delete) button.

4 Press the !" buttons to


select [DELETE ONE].
• You can change the image for
deletion with the #$ buttons.

5 Press the MENU/OK button.


• The display indicates that the files
are being deleted; once finished, it
returns to the screen in Step 4.

56
Deleting All Files

1 Press the 6 (Playback)


button.

2 Press the D (Delete) button.

If you are using the camera for the first time, read this section.
3 Press the !" buttons to
select [DELETE ALL].

4 Press the MENU/OK button.


• You are prompted to confirm that
you want to delete all images. If
so, press the $ button to select
[YES], and then press the MENU/
OK button.
Note ---------------------------------------------------------------------------------------------------
You can also delete files by pressing the D (Delete) button during three-frame view.
(GP.53)

Deleting Multiple Files at One Time

1 Press the 6 (Playback)


button.

2 Press the 9 (Thumbnail


Display) button twice.
• The screen is divided into 12
frames.

57
3 Press the !"#$ buttons to
select the file you want to
delete and press the D
(Delete) button.
• The trash symbol is displayed in
the upper left corner of the file.
If you are using the camera for the first time, read this section.

4 Repeat Step 3 to select all the files you want to


delete.
• If you selected a file by mistake, you can deselect it by selecting
the file and pressing the D (Delete) button.

5 Press the MENU/OK button.

6 Press the #$ buttons to


select [YES] and then press
the MENU/OK button.
• The display indicates that the files
are being deleted; once finished, it
returns to the thumbnail display
screen.

58
Changing the Display with
the DISP. Button
Pressing the DISP. button allows you to change the screen display
mode and toggle the information displayed on the LCD monitor.

If you are using the camera for the first time, read this section.
Shooting Mode
Each time you press the DISP. button, the display changes in the
following order: Histogram, Grid Guide, No Display, and Normal
Symbol Display.
Normal Symbol Display Histogram

No Display Grid Guide


Press the DISP. button to change the display.

Grid guide -------------------------------------------------------------------------------------------


This displays auxiliary lines on the LCD monitor to help you compose your picture.
These lines are not recorded with images.
Turning the LCD monitor on/off -------------------------------------------------------------
Pressing the VF/LCD button while the LCD monitor is on turns the LCD monitor off.
Some camera operations are not available when the LCD monitor is off. Pressing the
VF/LCD button again turns the LCD monitor on.
When a LCD viewfinder is mounted, pressing the VF/LCD button switches between the
LCD viewfinder and the LCD monitor.
Note ---------------------------------------------------------------------------------------------------
When [ENLGE PHOTO ICON] is turned on (GP.156), the following are not
displayed in normal symbol display.
Zoom bar/Focus bar, Date imprint, Sharpness, Color depth
59
During Quick Review
Pressing the DISP. button switches to the white saturation
highlights display. On the white saturation highlights display, the
white saturation areas of the image flash in black. Pressing the
DISP. button again returns to the quick review screen.
White Saturation
Quick Review Highlights Display
If you are using the camera for the first time, read this section.

Press the DISP. button to change the display.

During Playback Mode


Each time you press the DISP. button, the display changes in the
following order: Histogram, White Saturation Highlights Display, No
Display, and Normal Symbol Display.
Normal Symbol Display Histogram

2007/04/01 12:00 2007/04/01 12:00

No Display White Saturation


Highlights Display
Press the DISP. button to change the display.

White saturation highlights display --------------------------------------------------------


The white saturation areas of the image flash in black. White saturation is the loss of
grayscale that indicates the color shading in an image in which very bright areas of the
subject are rendered in white. An image with a loss of grayscale cannot be edited later.
It is recommended that you shoot another image while avoiding direct sunlight and
setting the exposure level lower (-). (GP.100)
Note ---------------------------------------------------------------------------------------------------
The white saturation highlights display is for reference only.
60
Maximizing the LCD Monitor Brightness
Hold the DISP. button down to maximize the display brightness.
When the brightness is at the maximum setting, holding the DISP.
button down returns the brightness to the level set in [LCD
BRIGHTNESS]. (GP.139)

If you are using the camera for the first time, read this section.
Histogram
When Histogram is on, a histogram
appears in the lower right corner on the
LCD monitor. A histogram is a graph
indicating the number of pixels on the
vertical axis and the brightness on the
horizontal axis (from left to right,
shadows (dark areas), midtones, and
highlights (bright areas)).
By using the histogram, you can determine the brightness of an
image without being affected by the brightness around the LCD
monitor. This also helps you correct for areas that are overly bright
or dark.
If the histogram has only peaks on the
right side without anything else, this
picture is over-exposed with too many
pixels only for highlight sections.

If the histogram has only peaks on the


left side without anything else, this
picture is under-exposed with too
many pixels only for shadow sections.
Correct the exposure to an appropriate
level.

61
Note ---------------------------------------------------------------------------------------------------
• The histogram displayed on the LCD monitor is for reference only.
• Depending on the shooting conditions (use of the flash, dark surrounding light, etc.),
the exposure level indicated in the histogram may not correspond to the brightness
of the shot image.
• Exposure compensation has its limitation. It does not necessarily achieve the best
possible result.
• A histogram with peaks in the center may not necessarily provide the best result to
If you are using the camera for the first time, read this section.

suit your particular requirements.


For example, an adjustment is required if you want to underexpose or overexpose
the image.
• For information on how to correct the exposure compensation, see P.100.

62
Advanced
Operations
1
Read this section when
you want to learn more 2
about the different
camera functions.
3

1 Various Shooting Functions ..... 64


4
2 Shooting/Playing Back Movies
................................................... 109
3 Other Playback Functions....... 113 5
4 Direct Printing .......................... 128
5 Changing Camera Settings........ 134
6
6 Downloading Images to Your
Computer .................................. 164
7 Appendices............................... 186 7
1 Various Shooting Functions

Using the ADJ. Lever

ADJ. Mode
1 You can press the ADJ. lever to easily select ADJ. mode and make
various shooting settings. In ADJ. mode, you can register four
functions. Use the SETUP menu to assign functions to the ADJ.
Various Shooting Functions

lever. (GP.134) By assigning a frequently used function to the


ADJ. lever, you can easily set that function with fewer operations.
ADJ LEVER SET.1 ADJ LEVER SET.2

ADJ LEVER SET.4 ADJ LEVER SET.3

The screenshots above are examples of the screen display when


[EXPOSURE COMP.], [WHITE BALANCE], [ISO], and [QUALITY] are
assigned to [ADJ LEVER SET.1] to [ADJ LEVER SET.4]. Press the ADJ.
lever left or right to display the screen of the function you want to set. Use
the !" buttons to select and press the MENU/OK button or the ADJ. lever
to make the setting.

Settings by Mode
The settings that can be made with the ADJ. lever differ among
scene mode, movie mode and still image mode. The following
settings can be made with the ADJ. lever.
Mode Available Settings
Still Image Mode Functions assigned to [ADJ LEVER SET]
Movie Mode White balance
Scene Mode ([TEXT MODE]) Text density
Scene Mode (other than [TEXT MODE]) Exposure compensation, white balance
Functions That Can Be Assigned to [ADJ LEVER SET]
EXPO.CMP., WHT.BAL, ISO, QUALITY, FOCUS, IMG SET, AE
METER, CONT MDE, AUTO BKT, WITH SND
64
Changing the Text Density (Scene Mode)
You can change the shading of text for shooting with [TEXT MODE]
(GP.46) in scene mode.
You can select from [DEEP], [NORMAL] and [LIGHT].
To change the setting, use the shooting setting menu or the ADJ. lever. This section explains
easy ways to change the shading setting with the ADJ. lever.
To use the shooting setting menu, see “Using the Menu” (GP.79) and “Shooting Setting
Menu Items by Scene Mode”. (GP.206) 1

1 Turn the mode dial to SCENE.

Various Shooting Functions


2 Press the MODE button.
• The scene mode selection screen appears.

3 Press the !" buttons to select


[TEXT MODE] and then press
the MENU/OK button.

4 Press the ADJ. lever.


• The text density menu appears.

5 Press the !" buttons to select


the desired density setting.
• You can also press the shutter release
button to take a picture.
6 Press the MENU/OK button.
• The text density setting does not appear on the screen.

65
Shifting the AF Target (Macro)
During macro shooting, pressing the ADJ. lever allows you to shift
the AF target by using the !"#$ buttons on the camera without
moving the camera. You can lock the focus (GP.39) at the
position where the AF target is shifted and shoot the picture. This
function is useful for shooting on a tripod.
1 When the AF
target is shifted
to the left with the
Various Shooting Functions

# button

1 With the camera ready to shoot, press the N (Macro)


button.
• The macro symbol appears on the screen.
2 Press the ADJ. lever.
3 Press the ADJ. lever to the left
or right until the AF target shift
function screen (cross-mark in
the middle of the screen)
appears.

4 Shift the cross-mark to the


subject you want the camera to
focus on with the !"#$
buttons.
5 Press the MENU/OK button.
6 Half-press the shutter release
button.
• The camera focuses on the area at the position of the cross-mark.
7 Gently press the shutter release button all the way.
• The AF target shift function automatically focuses the camera on the
set position until macro mode is cancelled.
66
Using the Function Button
You can assign one of the following functions to the Fn (Function)
button. Use the SETUP menu to assign a function to the Fn
(Function) button. (GP.150)
• Switching between auto focus and manual focus (AF/MF)
• Locking the exposure (AE LOCK)
• Shooting setting menu function (GP.64) 1
1 Press the Fn (Function) button.

Various Shooting Functions


• When the Fn (Function) button is
assigned to [AF/MF], see P.69.
• When the Fn (Function) button is
assigned to [AE LOCK], see P.70.
• When the Fn (Function) button is
assigned to a setting other than [AF/MF]
or [AE LOCK], the screen that appears
when the ADJ. lever is pressed appears. For the operating procedure,
see P.64.

67
Settings by Mode
The settings that can be made with the Fn (Function) button differ
among scene mode, movie mode and still image mode. The
following settings can be made with the Fn (Function) button.

(SKEW COR MODE)

(ZOOM MACRO)
Still Image Mode

(LANDSCAPE)
(TEXT MODE)
1

Other Scenes
Scene Mode

Scene Mode

Scene Mode

Scene Mode
Movie Mode
Various Shooting Functions

AF/MF O O O
AE LOCK O O O O O O
EXPO. CMP O O O O O
WHT. BAL. O O O O O O
ISO O O O
QUALITY O O O O O O O
FOCUS O O O O O
IMG SET O O O
AE METER O O O
CONT MDE O O
AUTO BKT O O
WITH SND O O O O O O
* AE LOCK does not work in manual exposure mode even if the Fn (Function) button is assigned to [AE
LOCK]. When the Fn (Function) button is pressed, the value is automatically set closer to the appropriate
exposure (closer to the center of the exposure value indicator). This is useful when, for example, you want
to change/adjust the exposure value from closer to the center of the exposure value indicator (the
appropriate exposure).

68
Switching Between Auto Focus and Manual
Focus (AF/MF)
Assigning the Fn (Function) button (GP.150) to [AF/MF] and then
pressing the Fn (Function) button during shooting allows you to
switch between auto focus (AF) and manual focus (MF). Pressing
the Fn (Function) button switches between auto focus and manual
focus depending on the [FOCUS] setting on the shooting setting 1
menu, as shown below.

Various Shooting Functions


[FOCUS] setting Pressing the Fn (Function) button
MULTI AF Switches between MF and MULTI AF
SPOT AF Switches between MF and SPOT AF
MF Switches between MULTI AF or SPOT AF* and MF
* The last selected AF mode (MULTI AF or SPOT AF) is selected.

1 With the camera ready to


shoot, press the Fn (Function)
button.
• When the focus mode changes to
manual focus, the [MF] symbol
appears at the upper right of the MAGNIFY
screen.
• When the focus mode changes to auto
focus (MULTI AF or SPOT AF), the
[MF] symbol disappears.
Caution------------------------------------------------------------------------------------------
When [FOCUS] is set to [SNAP] or [A], pressing the Fn (Function) button does not
switch AF/MF.

69
Note ----------------------------------------------------------------------------------------------
• For information on how to use manual focus, see P.84.
• You can also use the shooting setting menu to make the [FOCUS] setting. (GP.83)
• Use the SETUP menu to assign functions to the Fn (Function) button. (GP.150)
• You can press the Fn (Function) button to switch AF/MF and lock the focus at the
focus lock position (AF Lock). Use the following operating procedure.
1 With the camera set to auto focus, half-press the shutter release button to focus on
the subject. (Focus Lock)
2 Release the shutter release button and press the Fn (Function) button.
1 3 The camera is set to MF and the shooting distance is fixed at the focus lock
position.
Various Shooting Functions

• To return to auto focus mode, press the Fn (Function) button again.

Locking the Exposure (AE LOCK)


Assigning the Fn (Function) button (GP.150) to [AE LOCK] and
then pressing the Fn (Function) button during shooting allows you
to lock or cancel the exposure.
1 Check that the camera is ready to shoot.
2 Put the subject of your photo
in the center of the screen and
press the Fn (Function) button.
• The exposure is locked and AEL
mark, aperture value, and shutter
speed appear on the screen.
• Pressing the Fn (Function) button
again cancels the AE lock.
Note ----------------------------------------------------------------------------------------------
• The exposure continues to remain locked even after you shoot a picture.
• AE LOCK does not work in manual exposure mode even if the Fn (Function) button is
assigned to [AE LOCK]. When the Fn (Function) button is pressed, the value is
automatically set closer to the appropriate exposure (closer to the center of the
exposure value indicator). This is useful when, for example, you want to change/
adjust the exposure value from closer to the center of the exposure value indicator
(the appropriate exposure).
• Use the SETUP menu to assign functions to the Fn (Function) button. (GP.150)

70
Shooting with a Set Aperture Value
(A: Aperture Priority Mode)
Setting the mode dial to A (aperture priority mode) allows you to
manually set the aperture value. Once the aperture value is set, the
camera automatically sets the optimal shutter speed.
The selectable aperture depends on the zoom position.
Aperture values at wide-angle: from 2.5 to 9.1 1
Aperture values at telephoto: from 4.4 to 15.8

Various Shooting Functions


Selecting a lower aperture value (opening the aperture) allows you
to blur the background and capture a sharp portrait of the
foreground subject. Selecting a higher aperture value (closing the
aperture) allows you to capture an image with everything from the
foreground to the background in focus.
Use the up-down dial to set the aperture priority mode.
1 Turn the mode dial to A.

• The mode symbol appears on the SD 9999 1280


A
LCD monitor, and the current aperture
value is displayed in orange on the
right edge of the screen. F2.4

2 Rotate the up-down dial to


change the aperture value.

3 Half-press the shutter release


button.
• The shutter speed is set and F2.4
displayed on the screen. 1/32

4 Gently press the shutter


release button all the way.
• You can also shoot the picture without
half-pressing the shutter release button.
Note ----------------------------------------------------------------------------------------------
The aperture opens or closes once the shutter release button is pressed.
71
Shooting with a Set Aperture Value
and Shutter Speed
(M: Manual Exposure Mode)
Setting the mode dial to M (manual exposure mode) allows you to
manually set the aperture value and shutter speed.
1 For information on the available aperture values, see P.71.
You can select from the following shutter speeds.
Various Shooting Functions

1/2000 1/1600 1/1250 1/1000 1/800 1/640


1/500 1/400 1/320 1/250 1/200 1/160
1/125 1/100 1/80 1/60 1/50 1/40
1/30 1/25 1/20 1/15 1/13 1/10
1/8 1/6 1/5 1/4 1/3 1/2.5
1/2 1/1.6 1/1.3 1 2 4
8 15 30 60 120 180

Note ----------------------------------------------------------------------------------------------
Depending on the aperture value, some shutter speeds may not be available.

Faster shutter speeds allow to capture a sharp image of a fast-


moving subject. Slower shutter speeds allow you to capture an
image with a flowing effect and emphasize the movement of the
subject.
Use the up-down dial to set the aperture value.
Use the ADJ. lever to set the shutter speed.
1 Turn the mode dial to M.

• The mode symbol appears on the SD 9999 1280


M
LCD monitor, and the current aperture
value, shutter speed, and exposure
value indicator are displayed on the F2.4
right edge of the screen. 1/60

72
• When the exposure value is between
-2EV and +2EV, the brightness of the
LCD monitor changes according to +2EV
the exposure value.
• When the exposure value exceeds
the range of -2EV to +2EV, the
indicator lights orange and the
brightness of the LCD monitor does
not change.
-2EV
1

Various Shooting Functions


Rotate the up-down dial to M SD 9999 1280
change the aperture value.
3 Press the ADJ. lever to the left F4.0
1/80
or right to change the shutter
speed.
4 Half-press the shutter release
button.
5 Gently press the shutter release button all the way.

Note ----------------------------------------------------------------------------------------------
• To increase the exposure time, lower the shutter speed. In this case, camera shake
may occur. Hold the camera steady with two hands or use a tripod when shooting.
• While shooting with a slow shutter speed, the LCD monitor turns off.
• When the ISO setting is set to [AUTO] or [AUTO-HI] in manual exposure mode, the ISO
is fixed at ISO 100.
• AE LOCK does not work in manual exposure mode even if the Fn (Function) button is
assigned to [AE LOCK]. When the Fn (Function) button is pressed, the value is
automatically set closer to the appropriate exposure (closer to the adjust of the
exposure value indicator). This is useful when, for example, you want to change/adjust
the exposure value from closer to the center of the exposure value indicator (the
appropriate exposure).

Caution------------------------------------------------------------------------------------------
• When the shutter speed is set to 15 or more seconds, the function to remove noise
from images operates. Therefore, the time until image recording is complete is about
twice the set shutter speed plus about 8 seconds.
• When the shutter speed is set to 1 or more seconds, the camera shake correction
function cannot be used. When the shutter speed is set to 1 or more seconds while
the camera shake correction function is turned on, E changes to F.

73
Shooting with an Combined Aperture
Value and Shutter Speed
(P: Program Shift Mode)
Setting the mode dial to P (program shift mode) allows you to shoot
with a set combination of the aperture value and shutter speed.
1 Use the up-down dial to set the program shift mode.
1 Turn the mode dial to P.
Various Shooting Functions

• The mode symbol appears on the SD 9999 1280


P
LCD monitor.

2 Half-press the shutter release


button.
• The current combination of the F2.4
aperture value and shutter speed 1/30
appear on the screen.

3 Release your finger from the


shutter release button.
4 Rotate the up-down dial to P SD 9999 1280
select the combination of the
aperture value and shutter F3.2
speed. 1/80

• The combination of the aperture value


and shutter speed are displayed for
10 seconds. Rotate the up-down dial
during that time to change the
combination of the aperture value and
shutter speed.
74
5 Half-press or full-press the shutter release button to
shoot a picture.

Note ----------------------------------------------------------------------------------------------
• The following is the program diagram.
• In this example, the flash mode is set to [FLASH OFF], and the ISO setting is set to
[ISO 100].
• The aperture value and shutter speed can be shifted within the area indicated in gray.
This changes depending on the exposure value (Ev). 1
Ev8 Ev9 Ev10 Ev11 Ev12 Ev13 Ev14 Ev15 Ev16 Ev17 Ev18 Ev19

Various Shooting Functions


: Tele
Ev7 F16
: Wide
Ev6 F11
Ev5 F8
Ev4 F5.6
Ev3 F4
Ev2 F2.8
Ev1 F2
Ev0 F1.4

F1

2 1 1/2 1/4 1/8 1/15 1/30 1/60 1/125 1/250 1/500 1/1000 1/2000 1/4000

Shutter Speed

75
Shooting with Custom Settings
(MY1, MY2: My Settings Mode)
Setting the mode dial to MY1 or MY2 allows you to shoot with preset
settings. Use [REG. MY SETTINGS] on the SETUP menu to make
the MY1 and MY2 settings. (GP.140)

1 1 Turn the mode dial to MY1 or


MY2.
Various Shooting Functions

• Turn the mode dial to MY1 to make


the settings for [SETTING1] in [REG.
MY SETTINGS].
• Turn the mode dial to MY2 to make
the settings for [SETTING2] in [REG.
MY SETTINGS]. Symbol of shooting mode setting

2
registered to [REG. MY SETTINGS]
Half-press or full-press the
shutter release button to shoot A SD 9999 1280
a picture.
F2.4

Note ----------------------------------------------------------------------------------------------
You can change the camera settings set in my settings mode. Changing the mode or
turning the camera off returns the settings to the original MY1 and MY2 settings.

76
Shooting Setting Menu
Press the MENU/OK button in shooting mode to display the
shooting setting menu. The shooting setting menu can be used to
set the following shooting settings.

When Mode Dial is Set to 5/P/A/M/SCENE/MY1/MY2


• When the mode dial is set to SCENE, the settings that can be 1
selected are restricted. (GP.206)

Various Shooting Functions


Setting Options [Default Settings] Refer to
PIC QUALITY/SIZE RAW(10M), RAW3:2(9M), F3648(10M), [N3648(10M)], P.80
F3:2(9M), N3:2(9M), F1:1(7M), N3264(8M), N2592(5M),
N2048(3M), N1280(1M), N640(VGA)
FOCUS [MULTI AF], SPOT AF, MF, SNAP, A P.83
AE METERING [MULTI], CENTER, SPOT P.86
CONT. MODE [OFF], CONT., S-CONT, M-CONT P.87
IMG SET HARD, [NORMAL], SOFT, B&W, SEPIA, SETTING1, P.91
SETTING2
AUTO BRACKET [OFF], ON ±0.3, ON ±0.5, WB-BKT P.93
INTERVAL [0 s], 5 seconds to 3 hours P.96
IMAGE WITH SOUND [OFF], ON P.98
DATE IMPRINT [OFF], DATE, TIME P.99
EXPOSURE COMP.* -2.0 to +2.0 P.100
WHITE BALANCE [AUTO], (OUTDOORS), (CLOUDY), P.101
(INCANDESCENT LAMP), (FLUORESCENT LAMP),
(MANUAL SETTINGS)
ISO SETTING [AUTO], AUTO-HI, ISO 80, ISO 100, ISO 200, ISO 400, P.104
ISO 800, ISO 1600
CAMERA SHAKE OFF, [ON] P.106
COR
RESTORE P.108
DEFAULTS**
* This setting cannot be selected when the mode dial is set to M.
**
This setting can be selected only when the mode dial is set to 5.

77
When Mode Dial is Set to 3
Setting Options [Default Settings] Refer to
MOVIE SIZE 640, [320] P.80
FRAME RATE [30FPS], 15FPS P.110
FOCUS [MULTI AF], SPOT AF, MF, SNAP, A P.83
WHITE BALANCE [AUTO], (OUTDOORS), (CLOUDY), P.101
(INCANDESCENT LAMP), (FLUORESCENT LAMP),
1 (MANUAL SETTINGS)
Various Shooting Functions

Note ----------------------------------------------------------------------------------------------
The SETUP menu can be accessed from within the shooting setting menu. (GP.134)

78
Using the Menu
This explains how to make the settings.
Use the !"#$ buttons and MENU/OK button to select and set an
item.
1 Press the MENU/OK button in
shooting mode.
• The shooting setting menu is displayed. 1
The menu items are

Various Shooting Functions


provided on three screens.

2 Press the !" buttons to select


the desired item.
• Press the " button at the bottom item
to display the next screen.

3 Press the $ button.


• The menu item settings are displayed.
4 Press the !" buttons to select
the setting.
5 Press the MENU/OK button, or
press the # button and then the
MENU/OK button.
• The setting is set.
• The shooting setting menu disappears and the camera is ready to shoot.
Changing the display ----------------------------------------------------------------------
You can select a screen by the screen number:
1 Press the # button to select a screen number
on the left of the screen.
2 Press the !" buttons to change screens.
3 Press the $ button to return to menu item
selection.

79
Choosing Picture Quality Mode/
Image Size (PIC QUALITY/SIZE)
The file size of a shot still image depends on the picture quality
mode and image size settings. For movies, choose the movie size.
Figures inside the bold frame indicate those shown on the screen.
Still Images
1
Image Size Picture PIC QUALITY/ Remarks
Quality Mode SIZE
Various Shooting Functions

3648 × 2736 RAW RAW (10M) • For creating images with little
3648 × 2432 RAW3:2 (9M) deterioration.
• For downloading to a computer for
advanced image editing.
3648 × 2736 F (Fine) F3648(10M) • For downloading and editing images on
N (Normal) N3648(10M) your computer.
3648 × 2432 F (Fine) F3:2(9M) • For creating large prints.
N (Normal) N3:2(9M)
2736 × 2736 F (Fine) F1:1(7M)
3264 × 2448 N (Normal) N3264(8M)
2592 × 1944 N (Normal) N2592(5M) • For creating prints.
2048 × 1536 N (Normal) N2048(3M)
1280 × 960 N (Normal) N1280(1M) • For shooting a large number of pictures.
640 × 480 N (Normal) N640(VGA) • For shooting a large number of pictures.
• For attaching to e-mail.
• For posting on a website.
• When scene mode is set to [SKEW COR MODE], you can select
1280 × 960 or 640 × 480.
• When scene mode is set to [TEXT MODE], you can select
3648 × 2736 or 2048 × 1536.
• When the image size is set to [RAW3:2], [F3:2] or [N3:2], a black
border is added to the top and bottom of the image on the LCD
monitor in accordance with the shooting range.
• When the image size is set to [F1:1], a black border is added to
the left and right sides of the image on the LCD monitor in
accordance with the shooting range.
Movies
Image Size Movie Size
640 × 480 640
320 × 240 320
• You can also choose the number of frames for movies. (GP.110)
80
Note ----------------------------------------------------------------------------------------------
• The number of images that can be stored in the internal memory or SD memory card
depends on the [PIC QUALITY/SIZE] setting. (GP.197)
• There are three picture quality modes: Normal mode (N), Fine mode (F), and RAW
mode.
Normal mode: The compression ratio is high, resulting in a small file. Normally,
shooting is done in this mode.
Fine mode: The compression ratio is low, resulting in a large file, but the
picture quality is better than in Normal mode.
RAW mode: The raw image data is saved as a RAW format file (.DNG file).
1
A JPEG file is also recorded at the same time. This allows you

Various Shooting Functions


to use image editing software to edit the image while retaining
the high quality at the time the image was shot.

Shooting with RAW mode ----------------------------------------------------------------


Normally, a shot image is processed and compressed by the camera and then saved as
a small JPEG file. To make a JPEG file small, the image data is compressed and the
image quality is lowered.
When shooting in RAW mode, shot images are not processed by the camera. The raw
data loaded from the camera’s sensor is stored in the DNG file created when shooting in
RAW mode. A DNG file is a raw image format designed by Adobe Systems. You can use
image editing software compatible with the DNG file format to edit the near-original
image data on a computer. You can use the provided Irodio Photo & Video Studio to edit
DNG files on Windows. However, you cannot use the Irodio Photo & Video Studio to edit
DNG files on a Macintosh. Use a commercially-available software that can edit DNG
files.

When shooting in RAW mode, note the following:


• You cannot use CONT. MODE, AUTO BRACKET, DIGITAL ZOOM, or IMAGE WITH
SOUND in RAW mode.
• No date is added to the DNG file even if [DATE IMPRINT] is set. The date is added to
the JPEG file recorded at the same time as the DNG file.
• [IMG SET] settings on the Shooting menu apply only to the JPEG file recorded at the
same time.
• You can use [RAW/JPEG SETTING] on the SETUP menu to change the picture
quality and image size of the JPEG recorded at the same time. (GP.152)

81
1 With the camera ready to shoot, press the MENU/OK
button.
• The shooting setting menu is displayed.

2 Press the " button to select [PIC QUALITY/SIZE] and


press the $ button.
3 Press the !" buttons to select
1 the desired setting.
Various Shooting Functions

Still Images

Movies

4 Press the MENU/OK button, or press the # button and


then the MENU/OK button.
• The setting appears on the screen.

82
Changing the Focusing Mode
(FOCUS)
When you shoot the subject in the default focusing mode, the
camera focuses automatically with Auto Focus (AF).
Select from the following five focusing modes.
Focusing Modes 1
Symbol Mode Description

Various Shooting Functions


None MULTI AF Automatically measures the distances to a maximum of
five AF areas from among 17 AF areas and focuses to the
nearest AF area. This prevents the center of the LCD
monitor from becoming out of focus and enables you to
shoot with a minimum number of out-of-focus pictures.
None SPOT AF Selects one AF area at the center of the picture to allow the
camera to focus on this area automatically.
MF (Manual Focus) Enables you to adjust the focus manually.

SNAP Fixes the shooting distance to a short distance (about


2.5 m (8.2 ft.)).
A (Infinity) Fixes the shooting distance to infinity.
Infinity is useful for shooting distant scenes.

1 With the camera ready to shoot, press the MENU/OK


button.
• The shooting setting menu is displayed.
2 Press the " button to select [FOCUS] and press the $
button.
3 Press the !" buttons to select
the desired setting.
4 Press the MENU/OK button, or
press the # button and then
the MENU/OK button.

Note ----------------------------------------------------------------------------------------------
Assigning the Fn (Function) button (GP.150) to [AF/MF] allows you to switch between
auto focus and manual focus by pressing the Fn (Function) button. (GP.67)

83
Manual Focus Shooting (MF)
If the camera fails to focus automatically, you can focus manually
(MF: Manual Focus).
Manual focus enables shooting at a fixed distance.
Note ----------------------------------------------------------------------------------------------
• In scene mode, manual focus can be used only when [ZOOM MACRO] or [SKEW
1 COR MODE] is selected.
• You can also use manual focus to focus on objects within the macro shooting range.
• Assigning the Fn (Function) button (GP.150) to [AF/MF] allows you to switch
Various Shooting Functions

between auto focus and manual focus by pressing the Fn (Function) button.
(GP.67)

1 With the camera ready to shoot, press the MENU/OK


button.
• The shooting setting menu is displayed.
2 Press the " button to select [FOCUS] and press the $
button.
3 Press the !" buttons to select
[MF].

4 Press the MENU/OK button.


• [MF] and the focus bar are displayed
on the screen.
• The numbers indicated on the focus
bar are for reference only.

MAGNIFY

84
5 Press the # button as required.
• Pressing the # button enlarges the display for easy focusing.

6 Press the !" buttons to adjust the focus.


• Pressing the ! button adjusts the focus to farther objects.Pressing the
" button adjusts the focus to closer objects.

7 Press the shutter release button to shoot the picture.


1

Various Shooting Functions

85
Changing the Light Metering
(AE METERING)
You can change the metering method (the range to use for
metering) used to determine the exposure value.
There are three light metering modes.

1 Light Metering Modes


Symbol Mode Description
Various Shooting Functions

None MULTI The entire shooting range is divided into 256 partitions, and each is
metered to determine the overall exposure value.
CENTER The entire image is metered, with emphasis on the center, to
determine the exposure value.
Use this when the brightness of the center and surroundings are different.
SPOT Only the center of the image is metered to determine the exposure
value.
Use this setting when you want to use the brightness at the center.
This is useful if there is a marked difference in contrast or backlighting.

1 Turn the mode dial to 5/P/A/M/SCENE.


2 Press the MENU/OK button.
• The shooting setting menu is displayed.

3 Press the " button to select [AE METERING] and press


the $ button.
4 Press the !" buttons to select
the desired setting.

5 Press the MENU/OK button, or


press the # button and then
the MENU/OK button.
• The symbol appears on the screen.

86
Shooting with Multi-Shot
(CONT./S-CONT/M-CONT)
With Multi-shot, you can shoot consecutive images.
Multi-shot has the following three modes:

CONT.
Pictures continue to be taken for as 1
long as you hold down the shutter

Various Shooting Functions


release button.
Still images are recorded one at a time,
just as in normal shooting.

S (Stream)-CONT
With just one full-press of the shutter
release button, you can take 16
consecutive shots at intervals of 1/7.5
seconds in about 2 seconds.
The 16 still images are grouped
together as a set and are recorded as
one image file (3648 × 2736 pixels).

M (Memory-reversal)-CONT
The camera memorizes the scene while you hold down the shutter
release button, and once you release it, the previous 2 seconds of
shots are recorded.
The 16 still images are grouped together as a set and are recorded
as one image file (3648 × 2736 pixels).

(2) The camera records the previous (approx.) 2 seconds

(1) If you release the shutter release button here...

87
Caution------------------------------------------------------------------------------------------
• This function is not available when [PIC QUALITY/SIZE] is set to RAW mode.
• During Multi-shot, the digital zoom is activated even when [DIGITAL ZOOM IMG] is
set to [AUTO RSZ] on the SETUP menu.

Note ----------------------------------------------------------------------------------------------
• If you are using the LCD viewfinder (VF-1), the image you took does not appear during
CONT./S-CONT/M-CONT.
• If you are using the LCD monitor, the image you took appears only when shooting with
1 CONT. The image does not appear during S-CONT and M-CONT.
• When shooting with S-CONT or M-CONT, the ISO setting is fixed at [AUTO] even if it
Various Shooting Functions

is set to [ISO 80] or [ISO 100].


• The maximum number of images that can be shot in the multi-shot mode depends on
the image size setting.
• The numbers of images that can be shot in the multi-shot mode with the internal
memory are as shown in the table below.
Image Size Number of Multi-shot Mode Shots
3648 × 2736, 3648 × 2432, 2736 × 2736, 4
3264 × 2448, 2592 × 1944, 2048 × 1536
1280 × 960, 640 × 480 10

1 Turn the mode dial to 5/P/A/M/SCENE.


2 Press the MENU/OK button.
• The shooting setting menu is displayed.
3 Press the " button to select [CONT. MODE] and press
the $ button.
4 Press the !" buttons to select
[CONT], [S-CONT], or [M-
CONT].

5 Press the MENU/OK button, or


press the # button and then
the MENU/OK button.
• The symbol appears on the screen.

88
CONT.
6 Compose your picture and then press and hold the
shutter release button.
• Pictures continue to be taken for as long as you hold down the shutter
release button.
7 Release your finger from the shutter release button to
stop taking pictures. 1
• To playback consecutive images shot in multi-shot mode, switch the
camera to playback mode (GP.52) and select the still image you

Various Shooting Functions


want to play back with the #$ buttons.

S-CONT (S Multi-Shot)
6 Compose your picture and then press the shutter
release button.
• 16 pictures are taken automatically.

M-CONT (M Multi-Shot)
6 Compose your picture and then press and hold the
shutter release button.
• The camera memorizes the scene while you hold down the shutter
release button.
7 Release your finger from the shutter release button.
• The camera stops shooting and the 16 still images (in the previous 2
seconds) are recorded as one still image.
Note ----------------------------------------------------------------------------------------------
• To return to normal single-image shooting, follow Steps 1 to 3, select [OFF] in Step 4,
and press the MENU/OK button.
• In M-CONT mode, if you release the shutter release button within 2 seconds from the
time you first pressed it, the shots from the time you pressed the shutter until you
released it are recorded and the number of consecutive shots will be less than 16.
• The flash is turned off.
• The camera shake correction function cannot be used during Multi-shot shooting. If
Multi-shot shooting is set while the camera shake correction function is turned on,
E changes to F. (GP.106)

89
Viewing an S-CONT or M-CONT Still Image in
Enlarged Display Mode
While a still image (16 frames in an image file) taken with S-CONT
or M-CONT is displayed, you can enlarge any one of the 16 frames.
You can also switch between frames while viewing the image in
enlarged display mode.
1 To view a frame from an S-CONT or M-CONT still image in
enlarged display mode, follow the steps below.
1
Various Shooting Functions

Press the 6 (Playback) button.


• The last shot taken is displayed.

2 Press the #$ buttons to


display an S-CONT or M-CONT
still image.

3 Press the 8 (Enlarged View)


button.
• The first frame of the consecutive
images is displayed in enlarged
display mode. The frame position bar
appears at the bottom of the screen.
• Press the #$ buttons to switch
frames. To return to the 16-frame
display, press the MENU/OK button.
Note ----------------------------------------------------------------------------------------------
Press the DISP. button to switch between displaying the bar at the bottom of the screen,
displaying the grid guide, and hiding the display. (GP.59)

90
Setting the Picture Quality (IMG SET)
You can change the picture quality of an image, including the
contrast, sharpness, and color depth.
You can select from the following picture quality settings.
Picture Quality Modes
Type Description 1
HARD The contrast, sharpness, and color depth are increased to create a stronger,
sharper image.

Various Shooting Functions


NORMAL Normal picture quality
SOFT The contrast, sharpness, and color depth are decreased to create a softer image.
B&W Creates a black and white picture.
SEPIA Creates a picture with sepia tones.
SETTING1 You can customize the contrast, sharpness, and color depth to any of five
SETTING2 levels, as required.

1 Turn the mode dial to 5/P/A/M/SCENE.


2 Press the MENU/OK button.
• The shooting setting menu is displayed.

3 Press the " button to select [IMG SET] and press the $
button.
4 Press the !" buttons to select
the desired picture quality.
• For [SETTING1] or [SETTING2], set
the contrast, sharpness, and color
depth. (GP.92)
If [SETTING1] or [SETTING2] is
already programmed, you can set the
picture quality by selecting
[SETTING1] or [SETTING2].
5 Press the MENU/OK button, or
press the # button and then
the MENU/OK button.
• If you selected a setting other than
[NORMAL], the symbol appears on
the screen.

91
Customizing the Picture Quality
(SETTING1, SETTING2)
1 Turn the mode dial to 5/P/A/M/SCENE.
2 Press the MENU/OK button.
• The shooting setting menu is displayed.

1 3 Press the " button to select [IMG SET] and press the $
button.
Various Shooting Functions

4 Press the !" buttons to select


[SETTING1] or [SETTING2].
5 Press the $ button.
• The [IMG SET] screen appears.

6 Press the !" buttons to select


[CONTRAST], [SHARPNESS],
and [COLOR DEPTH], and
press the #$ buttons to adjust
the settings.
7 Press the MENU/OK button.
• The settings for [SETTING1] or
[SETTING2] are saved, and the display returns to the shooting setting
menu.

8 Press the MENU/OK button, or


press the # button and then
the MENU/OK button.
• The symbol appears on the screen.

92
Shooting Consecutively with
Different Exposures
(AUTO BRACKET)
The auto bracketing function automatically shoots three
consecutive shots at three exposure levels based on the set
exposure level. Select from [-0.3EV, ±0, +0.3EV] or [-0.5EV, ±0, 1
+0.5EV] for the difference in exposure level.

Various Shooting Functions


Note ----------------------------------------------------------------------------------------------
• This function is not available when shooting with sound.
• This function is not available when [PIC QUALITY/SIZE] is set to RAW mode.
1 Turn the mode dial to 5/P/A/M/SCENE.
2 Press the MENU/OK button.
• The shooting setting menu is displayed.
3 Press the " button to select [AUTO BRACKET] and
press the $ button.
4 Press the !" buttons to select
[ON ±0.3] or [ON ±0.5].
5 Press the MENU/OK button, or
press the # button and then the
MENU/OK button.
• [AB] appears on the screen.

6 Press the shutter release


button to shoot the subject.
• The screenshot to the right shows the
images shot with the [ON ±0.5] setting.
Three consecutive shots are taken at
-0.5EV, ±0, and +0.5EV based on the
set exposure compensation setting.
When shooting is completed, three still
images are displayed on the LCD
monitor. They are, from left to right, at -0.5EV (darker), standard
exposure compensation setting, and +0.5EV (brighter).
Note ----------------------------------------------------------------------------------------------
The exposure compensation can be changed using the shooting setting menu.
(GP.100)
93
Shooting Consecutively with Different White
Balance (WB-BKT)
The white balance bracket function automatically records three
images - a reddish image, a bluish image, and an image of the
current white balance.
This is useful if you cannot determine the appropriate white
1 balance.
1 Turn the mode dial to 5/P/A/M/SCENE.
Various Shooting Functions

2 Press the MENU/OK button.


• The shooting setting menu is displayed.

3 Press the " button to select [AUTO BRACKET] and


press the $ button.
4 Press the !" buttons to select
[WB-BKT].

5 Press the MENU/OK button, or


press the # button and then
the MENU/OK button.
• The symbol appears on the screen.

6 Press the shutter release


button to shoot the subject.
• Three images (a reddish image, an
image equal to the current white
balance, and a bluish image) are
automatically recorded.

94
Note ----------------------------------------------------------------------------------------------
• This function is not available when [PIC QUALITY/SIZE] is set to RAW mode.
• This function is not available for Multi-shot (GP.87) or auto bracket shooting.
(GP.93)
• The flash cannot be used.
• If [IMG SET] is set to [B&W], the white balance bracket function can be set but it does
not operate.
• The white balance can be changed using the shooting setting menu. (GP.101)
1

Various Shooting Functions

95
Shooting Pictures Automatically at
Set Intervals (INTERVAL)
You can set the camera to automatically take pictures at fixed
intervals.
You can set the shooting interval from 5 seconds to 3 hours in
increments of 5 seconds.
1
1 Turn the mode dial to 5/P/A/M/SCENE.
Various Shooting Functions

2 Press the MENU/OK button.


• The shooting setting menu is displayed.

3 Press the " button to select


[INTERVAL] and press the $
button.

4 Press the !" buttons to set


the hours.
5 Press the $ button to move to
the minutes setting, then use
the !" buttons to set the
minutes.
• You can press and hold either the !"
buttons to quickly raise or lower the minute setting.

6 Press the $ button to move to the seconds setting, then


use the !" buttons to set the seconds.
7 Press the MENU/OK button.
• [INTERVAL] appears on the screen. INTERVAL

8 Press the shutter release


button to shoot the picture.
• A picture is taken every time the fixed
STOP
interval elapses.

96
9 To stop shooting, press the MENU/OK button.

Caution------------------------------------------------------------------------------------------
• The interval shooting setting is cleared when the camera is turned off.
• The time until the next picture can be taken according to the shooting menu setting
may be longer than the time set for interval shooting. In this case, the shooting interval
becomes longer than the set time.

Note ---------------------------------------------------------------------------------------------- 1
• Depending on the remaining battery level, the battery may become depleted during
interval shooting. Use of the AC adapter (sold separately) is recommended.

Various Shooting Functions


• If you press the shutter release button during interval shooting, the camera shoots as
usual. However, the interval shooting setting is unaffected. After shooting, once the
time specified in interval shooting elapses, the next shot is taken.
• When interval shooting is turned on, Multi-shot is automatically set to [OFF] even if it
had been set to [CONT.] or [M-CONT].

97
Shooting a Still Image with Sound
(IMAGE WITH SOUND)
You can shoot a still image with a voice memo of up to eight
seconds.
1 Turn the mode dial to 5/P/A/M/SCENE.
1
2 Press the MENU/OK button.
• The shooting setting menu is displayed.
Various Shooting Functions

3 Press the " button to select [IMAGE WITH SOUND] and


press the $ button.
4 Press the !" buttons to select
[ON].

5 Press the MENU/OK button, or


press the # button and then
the MENU/OK button.
• The symbol appears on the screen.

6 Press the shutter release


button to shoot the picture.
• The camera starts recording after
shooting.

7 Press the shutter release button to finish recording.


• Even if the shutter release button is not pressed, recording
automatically stops after 8 seconds.

Note ----------------------------------------------------------------------------------------------
• This function is not available when [PIC QUALITY/SIZE] is set to RAW mode.
• To play back a still image with sound, display the still image in the same way as a still
image without sound (GP.52) and press the ADJ. lever to play back the sound.
• Press the !" buttons during sound playback to display the volume adjustment bar.
You can adjust the volume with the !" buttons.
98
Inserting the Date into a Still Image
(DATE IMPRINT)
You can insert the date (YY/MM/DD) or the date and time (YY/MM/
DD hh:mm) at the lower right of a still image.
1 Turn the mode dial to 5/P/A/M/SCENE.
1
2 Press the MENU/OK button.
• The shooting setting menu is displayed.

Various Shooting Functions


3 Press the " button to select [DATE IMPRINT] and press
the $ button.
4 Press the !" buttons to select
the desired setting.

5 Press the MENU/OK button, or


press the # button and then
the MENU/OK button.
• The symbol appears on the screen.

Note ----------------------------------------------------------------------------------------------
• If the date and time have not been set, [DATE IMPRINT] cannot be used. First make
the date and time settings. (GP.161)
• [DATE IMPRINT] cannot be used with movies.
• When shooting in RAW mode, the date cannot be imprinted on the DNG file. The date
is added to the JPEG file recorded at the same time as the DNG file.

99
Changing the Exposure
(EXPOSURE COMP.)
The exposure setting enables you to select the brightness level for your
picture. Normally, if your subject is centered, backlight compensation is
automatically activated, and you can shoot with the correct exposure.
In the following cases, or when you intentionally want to change the
1 exposure, you can adjust the exposure setting. Exposure can be
specified in the range from -2.0 to +2.0. Setting the level higher (+)
makes the picture brighter and lower (-) makes the picture darker.
Various Shooting Functions

For backlighting
When the background is particularly bright, the subject will appear dark
(underexposed). In this case, set the exposure level higher (+).
When your subject is whitish
The entire picture will turn out dark (underexposed). Set the exposure level
higher (+).
When your subject is darkish
The entire picture will turn out bright (overexposed). Set the exposure level
lower (-).
The same happens when you take a photo of a subject in a spotlight.
To change the setting, use the shooting setting menu or the ADJ. lever. This section explains
easy ways to change the setting with the ADJ. lever. You can also change the function
assigned to the ADJ. lever. (GP.148)
To use the shooting setting menu, see “Using the Menu”. (GP.79)
1 Turn the mode dial to 5/P/A/SCENE.
2 Press the ADJ. lever and then press the #$ buttons
until the exposure compensation bar appears.
3 Press the !" buttons to set the exposure setting.
• You can also press the shutter release button to take a picture.
4 Press the MENU/OK button.
• The setting appears on the screen.

Caution------------------------------------------------------------------------------------------
• This function is not available in manual exposure mode.
• When shooting in particularly bright places, you may not be able to correct the
exposure level. In that case, the [!AE] symbol appears on the screen.
100
Using Natural and Artificial Lighting
(WHITE BALANCE)
Adjust the white balance so that a white subject will appear white.
At purchase, the white balance is set to [AUTO]. Normally you do
not need to change the setting, but if the camera is having difficulty
determining the white balance when shooting an object of a single
color or when shooting under multiple light sources, you can 1
change the setting.

Various Shooting Functions


White Balance Modes
Symbol Mode Description
AUTO AUTO Adjusts the white balance automatically.
OUTDOORS Select this when shooting outdoors (sunny) and white
balance fails to adjust properly.
CLOUDY Select this when shooting in cloudy weather or shade and the
white balance fails to adjust properly.
INCANDESCENT Select this when shooting under incandescent light and white
LAMP balance fails to adjust properly.
FLUORESCENT Select this when shooting under fluorescent light and white
LAMP balance fails to adjust properly.
MANUAL Adjust the white balance manually.
SETTINGS
To change the setting, use the shooting setting menu or the ADJ. lever. This section explains
easy ways to change the setting with the ADJ. lever. You can also change the function
assigned to the ADJ. lever. (GP.148)
To use the shooting setting menu, see “Using the Menu”. (GP.79)

1 Turn the mode dial to 5/P/A/SCENE.


2 Press the ADJ. lever and then press the #$ buttons
until the white balance menu appears.
3 Press the !" buttons to select a setting other than [M].
• You can also press the shutter release button to take a picture.

101
4 Press the MENU/OK button.
• The symbol appears on the screen.

1
Note ----------------------------------------------------------------------------------------------
• The white balance may not be adjusted correctly for a subject that is mostly dark. In
Various Shooting Functions

this case, add something white to the subject.


• When shooting with the flash, the white balance may not be adjusted correctly if
[AUTO] is not selected. In this case, switch to [AUTO] to shoot with the flash.

102
Setting the White Balance Manually
(MANUAL SETTINGS)
1 Turn the mode dial to 5/P/A/SCENE.
2 Press the ADJ. lever and then press the #$ buttons
until the white balance menu appears.
3 Press the !" buttons to select 1
[M].

Various Shooting Functions


4 Point the camera at a piece of
paper or something white
under the lighting conditions
for your picture.
5 Press the DISP. button.
• The white balance is set.

6 Press the MENU/OK button.


• The symbol appears on the screen.
• The screen is displayed with the white
balance set in Step 5. If the result is
not as expected, repeat Steps 4 and 5
to change the settings as many times
as required.

Note ----------------------------------------------------------------------------------------------
To cancel [MANUAL SETTINGS], select a setting other than [M] in Step 3.

103
Changing the Sensitivity
(ISO SETTING)
ISO sensitivity indicates how sensitive film is to light. A greater
value means higher sensitivity. High sensitivity is suitable for
shooting an object in a dark place or a fast-moving object while
minimizing blurring.
1 You can select from the following ISO settings:
[AUTO], AUTO-HI, ISO 80, ISO 100, ISO 200, ISO 400, ISO 800,
Various Shooting Functions

ISO 1600
When ISO setting is set to [AUTO], the camera automatically
changes the sensitivity according to the distance, brightness, zoom,
macro settings, and picture quality/size. Usually, use the camera in
the [AUTO] mode.
When the ISO setting is set to [AUTO-HI] (auto high sensitivity), the
sensitivity is automatically set according to the shooting conditions
but at a higher sensitivity than in [AUTO]. When shooting a dark
subject, the shutter speed set in [AUTO-HI] is faster than in [AUTO],
which may reduce camera shake or blurring of the subject. In
[AUTO-HI], the sensitivity is automatically increased to the ISO
sensitivity set in the SETUP menu. (GP.143)
If you do not want to allow the camera to change the ISO sensitivity,
select an ISO setting other than [AUTO] or [AUTO-HI].
To change the setting, use the shooting setting menu or the ADJ. lever. This section explains
easy ways to change the setting with the ADJ. lever. You can also change the function
assigned to the ADJ. lever. (GP.148)
To use the shooting setting menu, see “Using the Menu”. (GP.79)

1 Turn the mode dial to 5/P/A/SCENE.


2 Press the ADJ. lever and then
press the #$ buttons until the
ISO menu appears.
3 Press the !" buttons to select
the desired setting.

104
4 Press the MENU/OK button, or
# button and press the MENU/
OK button.
• The setting appears on the screen.

Note ---------------------------------------------------------------------------------------------- 1
• When the ISO setting is set to [AUTO], the sensitivity is equivalent to ISO 160 if the

Various Shooting Functions


flash is used. When the image size is 3648 × 2736, the sensitivity is equivalent to ISO
100 if the flash is not used.
• Images shot with a higher sensitivity may appear grainy.
• When the ISO setting is set to [AUTO], the range of the ISO sensitivity is shown below.
Flash off
Pixels Default sensitivity Minimum sensitivity Maximum sensitivity
640 100 80 283
1280 100 80 238
2048 100 80 176
2592 100 80 154
3264 100 80 154
3648 100 80 154
Flash on
Zoom Default sensitivity Minimum sensitivity Maximum sensitivity
Wide 100 100 400
Tele 308 100 400

105
Using the Camera Shake Correction
Function to Prevent Camera Shake
(CAMERA SHAKE COR)
You can prevent camera shake by turning on the camera shake
correction function.
1 At the time of purchase, the camera shake correction function is
turned on.
1
Various Shooting Functions

Turn the mode dial to 5/P/A/M/SCENE.


2 Press the MENU/OK button.
• The shooting setting menu is displayed.

3 Press the " button to select [CAMERA SHAKE COR]


and press the $ button.
4 Press the !" buttons to select
[ON].

5 Press the MENU/OK button, or


press the # button and then
the MENU/OK button.
• The symbol appears on the screen.

106
Caution------------------------------------------------------------------------------------------
• In multi-shot mode or manual exposure mode, when the shutter speed is set to 1 or
more seconds, the camera shake correction function cannot be used. When the
camera shake correction function is turned on in multi-shot mode or the shutter speed
is set to 1 or more seconds in manual exposure mode, E changes to F.
• The camera shake correction function does not work in movie mode. When the mode
dial is set to 3 (movie mode) while the camera shake correction function is on, E
disappears from the LCD monitor.
• The camera shake correction function cannot prevent movement of the shooting
subject (caused by wind, etc.).
1
• Effects of the camera shake correction function vary depending on the surroundings.

Various Shooting Functions


Note ----------------------------------------------------------------------------------------------
The J symbol appears when camera shake is likely to occur. (GP.37)

107
Returning the Shooting Setting Menu
Settings to their Defaults
(RESTORE DEFAULTS)
To return the shooting setting menu settings to their defaults, follow
the steps below.
1 1 Turn the mode dial to 5.
2
Various Shooting Functions

Press the MENU/OK button.


• The shooting setting menu is displayed.

3 Press the !" button to select


[RESTORE DEFAULTS] and
press the $ button.
• A confirmation message appears.

4 Make sure that [YES] is


selected, and then press the
MENU/OK button.
• The display indicates the camera is restoring the initial settings. Once
it is finished, the display returns to the shooting mode screen.

Note ----------------------------------------------------------------------------------------------
For a list of functions whose settings are saved when the camera is turned off, see
“Appendices”. (GP.203)

108
2 Shooting/Playing Back Movies

3 Shooting Movies
You can shoot movies with sound.
You can set the image size to 640 × 480 or 320 × 240 pixels.
You can set the number of frames shot per second (frame rate) to
either 30 or 15.
Each movie you shoot is recorded as an AVI file.
1 Turn the mode dial to 3
(movie mode). 2

Shooting/Playing Back Movies


2 Press the shutter release
button.
• The camera starts recording.
Recording continues until you press
the shutter release button again.

3 Press the shutter release


button to finish recording the
movie.
Caution------------------------------------------------------------------------------------------
• While shooting movies, operation sounds may be recorded.
• The maximum recording time per shooting depends on the size of your SD memory
card. (GP.111) Even if you are within the maximum recording time, recording may
end depending on your card.
• The camera shake correction function does not work in movie mode. When the mode
dial is switched to 3 (movie mode) while the camera shake correction function is on,
E disappears from the LCD monitor.

109
Note ----------------------------------------------------------------------------------------------
• The flash cannot be used.
• While shooting movies, only digital zoom can be used. (GP.42)
• When the shutter release button is pressed in Step 2, the camera focuses on the
subject.
• The remaining recording time may not change uniformly because it is recalculated
from the remaining memory capacity during movie recording.
• Use the shooting setting menu to set the image size (GP.80) and frame rate
(GP.110) of movies.
• The shooting setting menu items for movie mode differ from those in still image mode.
(GP.78)
• A high speed memory card is recommended when shooting for long periods.
2
Setting the Frame Rate (FRAME RATE)
Shooting/Playing Back Movies

You can select the number of shot frames per second (frame rate)
in movie mode.
1 Turn the mode dial to 3 (movie mode).
2 Press the MENU/OK button.
• The shooting setting menu is displayed.
3 Press the " button to select [FRAME RATE] and press
the $ button.
4 Press the !" buttons to select
[30FPS] or [15FPS].
5 Press the MENU/OK button, or
press the # button and then
the MENU/OK button.
• The setting appears on the screen.

Movie frames----------------------------------------------------------------------------------
Movies consist of many frames whose images appear to be moving when displayed at
high speed.

110
Note ----------------------------------------------------------------------------------------------
• Movie recording time may vary depending on the capacity of the recording destination
(internal memory or SD memory card), shooting conditions, and the type and
manufacturer of the SD memory card.
• The table below shows the approximate recording time.
Internal 64 MB 128 MB 256 MB 512 MB 1 GB 2 GB 4 GB
Memory
640 × 480 24 s 57 s 1 min 3 min 7 min 14 min 30 min 59 min
(15 FPS) 56 s 51 s 46 s 57 s 24 s 42 s
640 × 480 12 s 28 s 58 s 1 min 3 min 7 min 15 min 30 min
(30 FPS) 56 s 55 s 31 s 19 s 4s
320 × 240 1 min 2 min 5 min 11 min 24 min 46 min 94 min 184 min
(15 FPS) 16 s 58 s 59 s 57 s 5s 19 s 11 s 57 s 2
320 × 240 39 s 1 min 3 min 6 min 12 min 23 min 48 min 94 min

Shooting/Playing Back Movies


(30 FPS) 31 s 4s 7s 19 s 42 s 13 s 40 s

111
Playing Back Movies
To playback movies, follow the steps below.
1 Press the 6 (Playback) button.
• The last shot taken is displayed.
• The first frame of the movie is displayed as a still image.

2 Select the movie you want to


view using the #$ buttons.
• Press the $ button to display the next
file.
2 • Press the # button to display the
previous file.
Shooting/Playing Back Movies

3 Press the ADJ. lever.


START

• Playback begins.
The elapsed playback indicator or the elapsed time is displayed on the
screen.
Fast Forward Press the z button during playback.
Rewind Press the Z button during playback.
Pause/Playback Press the ADJ. lever.
Slow Playback Press and hold the z button during pause.
Slow Rewind Press and hold the Z button during pause.
Next Frame Press the z button during pause.
Previous Frame Press the Z button during pause.
Volume Adjustment Press the !" buttons during playback.

112
3 Other Playback Functions

Playback Setting Menu


Press the MENU/OK button in playback mode to display the
playback setting menu. The playback setting menu allows you to
make the settings for the following functions.

Setting Options Refer to


SLIDE SHOW P.114
PROTECT Select/Cancel 1 FILE, Select/Cancel ALL FILES, Select P.115
Multi-files
DPOF Select/Cancel 1 FILE, Select/Cancel ALL FILES, Select P.118
Multi-files 3
RESIZE 1280, 640 P.121

Other Playback Functions


COPY TO CARD P.123
SKEW P.124
CORRECTION

Note ----------------------------------------------------------------------------------------------
The SETUP menu can be accessed from within the playback setting menu. (GP.134)

Using the Menu


This explains how to make the settings.
1 Press the 6 (Playback) button to select the playback
mode.
2 Press the MENU/OK button.
• The playback setting menu appears.

3 Press the !" buttons to select


the desired item.
4 Press the $ button.
• The screen for the selected menu item
appears.

113
Displaying Photos in Order
Automatically (SLIDE SHOW)
You can display the recorded still images and movie files
sequentially on the screen. This is called a slide show. To view a
slide show, follow the steps below.
1 Press the 6 (Playback) button.
• The last shot taken is displayed.

2 Press the MENU/OK button.


• The playback setting menu appears.
3 Press the " button to select
3 [SLIDE SHOW] and press the $
button.
Other Playback Functions

• The slide show starts and files are


played back in order.
• If you want to stop the slide show in
progress, press any button on the
camera.
The slide show repeats itself until
stopped.
Note ----------------------------------------------------------------------------------------------
• Each still image is displayed for three seconds.
• For movies, not just one frame, but the entire movie you shot is played back.
• If a still image has a voice memo, the voice memo is also played back.

114
Write-Protecting Files (PROTECT)
You can protect files from being accidentally deleted.
Caution------------------------------------------------------------------------------------------
Protected files cannot be deleted normally. However, they will be deleted if you format
the memory where the files are stored.

Protecting a File
1 Press the 6 (Playback) button.
• The last shot taken is displayed.

2 Press the #$ buttons to display the file you want to


protect. 3
3 Press the MENU/OK button.

Other Playback Functions


• The playback setting menu appears.
4 Press the " button to select
[PROTECT] and press the $
button.

5 Make sure that [1 FILE] is


selected, and then press the
MENU/OK button.

• The selected file is protected and the


symbol appears on the screen.

Note ----------------------------------------------------------------------------------------------
To unprotect a file, display the file you want to unprotect and perform Steps 3 to 5.
115
Protecting All Files
To protect all your files, follow the steps below.
1 Press the 6 (Playback) button.
2 Press the MENU/OK button.
• The playback setting menu appears.

3 Press the " button to select


[PROTECT] and press the $
button.

4 Press the !" buttons to select


Other Playback Functions

[ALL FILES].
5 Make sure that [SELECT] is
selected, and then press the
MENU/OK button.
• All files are protected and the symbol
appears on the screen.
Note ----------------------------------------------------------------------------------------------
To cancel protection for all protected files, select [CANCEL] in Step 5.

116
Protecting Multiple Files at Once
To protect selected files all at once, follow the steps below.
1 Press the 6 (Playback) button.
2 Press the 9 (Thumbnail Display) button twice.
• The screen is divided into 12 frames and thumbnails are displayed
(Grid view).

3 Press the !"#$ buttons to select the first file you


want to protect.
4 Press the MENU/OK button.
• The playback setting menu appears.

5 Press the " button to select 3


[PROTECT] and press the $

Other Playback Functions


button.
• The Protect symbol appears in the
upper-right corner of the file.

6 Press the !"#$ buttons to


select the next file you want to
protect, and then press the
MENU/OK button.
7 Repeat Step 6 to select all the files you want to protect.
• If you selected a file by mistake, you can deselect by selecting the file
and pressing the MENU/OK button again.

8 Press the DISP. button.


• The display indicates that the selected images are being processed;
once finished, the display returns to the thumbnail display screen (Grid
view).
Note ----------------------------------------------------------------------------------------------
• To unprotect multiple files, follow the same steps described above to select the files
to unprotect, and then press the DISP. button.
• You can also unprotect all files at once. (GP.116)
• For information on thumbnail display, see P.53.

117
Using a Printing Service (DPOF)
The still images recorded on an SD memory card can be printed out
if you take them to a store that offers a digital camera print service.
To use a print service, you must make print settings on your camera.
These settings are called Digital Print Order Format (DPOF) settings.
The DPOF setting specifies one print per still image. When making
DPOF settings in grid view, you can also specify the number of
copies to print. (GP.120)

Setting DPOF for the Displayed Still Image


1 Press the 6 (Playback) button.
3
2 Press the #$ buttons to display the still image for
which you want to make the DPOF setting.
Other Playback Functions

3 Press the MENU/OK button.


• The playback setting menu appears.

4 Press the " button to select


[DPOF] and press the $
button.

5 Make sure that [1 FILE] is


selected, and then press the
MENU/OK button.
• Once the DPOF setting is made, the
DPOF symbol appears on the screen.

Note ----------------------------------------------------------------------------------------------
• To remove the DPOF setting, display the still image with the DPOF setting and
perform Steps 3 to 5.
• When you make DPOF settings for images shot in RAW mode, DPOF settings are
only made for JPEG files.
118
Setting DPOF for All Still Images
To apply DPOF settings to all your still images, follow the steps
below.
1 Press the 6 (Playback) button.
2 Press the MENU/OK button.
• The playback setting menu appears.

3 Press the " button to select


[DPOF] and press the $
button.
4 Press the !" buttons to select
3
[ALL FILES].

Other Playback Functions


5 Make sure that [SELECT] is
selected, and then press the
MENU/OK button.
• Once the DPOF setting is made, the
DPOF symbol appears on the screen.

Note ----------------------------------------------------------------------------------------------
To cancel the DPOF settings for all still images with DPOF settings, select [CANCEL] in
Step 5.

119
Setting DPOF for Multiple Still Images
To make the DPOF settings for selected still images all at once,
follow the steps below.
1 Press the 6 (Playback) button.
2 Press the 9 (Thumbnail Display) button twice.
• The screen is divided into 12 frames and thumbnails are displayed
(Grid view).

3 Press the !"#$ buttons to select the first still image


for which you want to make the DPOF setting.
4 Press the MENU/OK button.
3 • The playback setting menu appears.

5 Press the " button to select


Other Playback Functions

[DPOF] and press the $ button.


6 Press the !" buttons to set
the number of copies to print.
• Press the ! button to increase the
number of copies, or press the "
button to decrease the number of
copies.

7 Press the #$ buttons to select the next still image for


which you want to make the DPOF setting.
8 Press the !" buttons to set the number of copies to print.
• Press the ! button to increase the number of copies, or press the "
button to decrease the number of copies.
9 Repeat Steps 7 and 8 to select all the still images for
which you want to make the DPOF setting.
10 Press the MENU/OK button.
• The display indicates that the selected images are being processed;
once finished, the display returns to the thumbnail display screen.
Note ----------------------------------------------------------------------------------------------
• To remove the DPOF settings for multiple still images, follow the same steps
described above to set the number of copies to print to [0] for each image, and then
press the MENU/OK button.
• You can also cancel the DPOF settings for all still images at once. (GP.119)
120
Changing the Image Size (RESIZE)
You can reduce the image size of a shot still image to create a new
file with a different image size.
Original Resized
F3648/N3648/F3:2/N3:2/F1:1/N3264/N2592/N2048 N1280 N640
N1280 N640

Caution------------------------------------------------------------------------------------------
• You can resize only still images and still images with voice memos. Movies cannot be
resized.
• You cannot change the image size of images shot in RAW mode.

Note ----------------------------------------------------------------------------------------------
• The ratio of width to height of [F3:2] and [N3:2] images are 3:2. When an image of this 3
type is resized, it is reduced to a 4:3 image with black borders at the top and bottom.

Other Playback Functions


• The ratio of width to height of [F1:1] images is the same (1:1). When an image of this
type is resized, it is reduced to a 4:3 image with black borders on the left and right.
• You can also change the image size during shooting. (GP.80)

To change the image size, follow the steps below.


1 Press the 6 (Playback) button.
2 Press the #$ buttons to display the file with the image
size you want to change.
3 Press the MENU/OK button.
• The playback setting menu appears.

4 Press the " button to select


[RESIZE] and press the $
button.

121
5 Press the !" buttons to select
[1280] or [640].
6 Press the MENU/OK button.
• The display indicates that the image is
being processed, and then the still
image with the changed image size is
recorded. The image before the image
size is changed is also recorded.

3
Other Playback Functions

122
Copying the Contents of the Internal
Memory to an SD Memory Card
(COPY TO CARD)
You can copy all movies, still images, and sound data stored in the
internal memory onto an SD memory card at once.
1 Turn the camera off.
2 Insert an SD memory card.
3 Turn the camera on.
4 Press the 6 (Playback) button.
3
5 Press the MENU/OK button.

Other Playback Functions


• The playback setting menu appears.

6 Press the " button to select


[COPY TO CARD] and press
the $ button.
• The display indicates copying is in
progress; once finished, the display
returns to the playback screen.

Note ----------------------------------------------------------------------------------------------
• If the capacity of the SD memory card to which you are copying is insufficient, a
message will be displayed indicating there is not enough capacity. To copy only the
number of shots that will fit into the available capacity, select [YES] and then press the
MENU/OK button. To cancel copying, select [NO] and then press the MENU/OK
button.
• It is not possible to copy the contents of an SD memory card to the internal memory.

123
Straightening Skewed Images
(SKEW CORRECTION)
You can straighten rectangular objects, such as a message board
or business card, shot at an angle, to make them look as if they
were shot squarely.
1 Press the 6 (Playback) button.
2 Press the #$ buttons to display the file you want to
straighten.
3 Press the MENU/OK button.
• The playback setting menu appears.
3
4 Press the " button to select
Other Playback Functions

[SKEW CORRECTION] and


press the $ button.
• The display indicates that the image is
being processed, and then the area
recognized as the correction range is
displayed with an orange frame. Up to
five areas can be recognized.
• If the target area cannot be detected,
an error message appears. The image before correction remains
recorded.
• To select another correction area, move the orange frame to the target
area by pressing the $ button.
• To cancel skew correction, press the ! button. Even if you cancel
skew correction, the image before skew correction remains recorded.

5 Press the MENU/OK button.


• The display indicates that the image is being corrected, and then the
corrected image is recorded. The image before correction is also
recorded.

124
Caution------------------------------------------------------------------------------------------
• Skew correction mode does not work with movies.
• For images shot in RAW mode (GP.80), the skew is corrected in the JPEG file
recorded at the same time as the raw data. No skew is corrected in the DNG file.

Note ----------------------------------------------------------------------------------------------
• The image size does not change for skew corrected images.
• If the image size is large, skew correction will take time. Resize the image (GP.121)
before performing skew correction to speed up the process.
• The following table shows the approximate time required for skew correction.
Image Size Correction time
3648 × 2738 Approx. 52 seconds
3264 × 2448 Approx. 41 seconds
2592 × 1944 Approx. 26 seconds
2048 × 1536 Approx. 15 seconds 3
1280 × 960 Approx. 6 seconds
640 × 480 Approx. 2 seconds

Other Playback Functions


• When scene mode is set to [SKEW COR MODE], you can shoot an image and then
immediately correct any skew in the image. (GP.46)

125
Viewing on a Television
You can view files you have taken on a TV screen. The camera
displays everything on the TV screen just as it would on the LCD
monitor.
To use your television for viewing, connect your camera to the
television with the AV cable that came with your camera. To view
files on a television, follow the steps below.
1 Securely connect the AV cable Video input terminal (yellow)
to the Video In terminal on the
television.
• Connect the white plug of the AV
3 cable to the audio input terminal
(white) of the TV unit and the yellow
plug to the video input terminal
Other Playback Functions

(yellow).
Audio input terminal (white)

2 Make sure that the camera is off.


3 Open the terminal cover.

4 Securely connect the AV cable


to the AV output terminal on
the camera.
5 Set the television to Video
mode. (Set the input to Video)
• For details, see the documentation
that came with the television.

6 Press the POWER button or


the 6 (Playback) button for
more than one second to turn
the camera on.

126
Caution------------------------------------------------------------------------------------------
When the AV cable is connected to the camera, the indicators on LCD monitor and LCD
viewfinder disappear and the speaker output turns off.

Note ----------------------------------------------------------------------------------------------
• You can connect the AV cable to the Video In terminal on your video recorder and
record what you have shot to a video recorder.
• Your camera is set to NTSC playback format (used in Japan and other countries/
regions) for use with television equipment and other audiovisual equipment. If the
equipment you want to connect to uses PAL format (used in Europe and elsewhere),
then switch your camera to PAL format before connecting. (GP.163)
• The default setting varies depending on where you purchased the camera.

Other Playback Functions

127
4 Direct Printing

Direct Print Function


The direct print standard enables direct printing from a camera to a
printer by connecting them via a USB cable. Photos can be printed
quickly and easily from your digital camera without using a
computer.
Caution------------------------------------------------------------------------------------------
• You cannot print movies (AVI files) with this function. For still images with sounds
(JPG files with WAV files), only the still images (JPG files) are printed.
• For images shot in RAW mode, the JPEG file recorded at the same time as the raw
data is printed. The DNG file is not printed.

Note ----------------------------------------------------------------------------------------------
• This camera uses PictBridge, an industry standard for direct printing.
4 • Your printer must be compatible with PictBridge to use the direct print function. For
support information, see the documentation that came with the printer.
Direct Printing

• For some printers, direct print may not be available when [MASS STR] is selected for
[USB CONNECTION] (GP.157) in the SETUP menu of the camera. In such cases,
select [ORIGINAL] instead.

128
Connecting the Camera to a Printer
Connect your camera to a printer using the USB cable provided.
1 Make sure that the camera is off.
2 Open the terminal cover.

3 Connect your camera to a


printer using the USB cable
provided.
• Turn on the printer if it is not already
on.
4

Note ----------------------------------------------------------------------------------------------

Direct Printing
To disconnect the camera from the printer, check that the power is off on both units
before disconnecting the USB cable between them.

129
Printing Still Images
You can print still images from the camera with a PictBridge-
compatible printer.
Still images are sent from the internal memory when no SD memory
card is loaded or from an SD memory card when one is loaded.
Caution------------------------------------------------------------------------------------------
Do not disconnect the USB cable during printing.

Note ----------------------------------------------------------------------------------------------
If a [PRINTER ERROR] message appears during image transfer, check the printer status
and take the appropriate action.

Printing One or All Still Images


1 Check that the printer is ready
4 to print.
• The [CONNECTING...] screen
Direct Printing

appears.
2 Press the ADJ. lever.
• The direct print playback mode screen
appears.

3 Press the #$ buttons to select an image for printing.


4 Press the ADJ. lever.
5 Press the !" buttons to select
[1 FILE] or [ALL FILES].
6 Press the MENU/OK button.
• The direct print menu appears.

130
7 Press the !" buttons to select
an item, and then press the $
button to display the detailed
options screen.
• When [CONNECTING...] is displayed,
the connection to the printer is not yet
established. When a connection is
established, [CONNECTING...]
disappears and [DIRECT PRINT]
appears. Proceed with this step after the connection is established.
• The following items can be selected. Each item appears only when
supported by the printer connected to the camera.
The items marked with an asterisk (*) appear only when [REPORT
PRINT] is supported by a Ricoh printer connected to the camera.
Item Name Description
PAPER SIZE Sets the paper size.
PAPER TYPE Sets the paper type.
LAYOUT Sets the number of images printed on a sheet of paper. The 4
number of images that can be laid out on a sheet of paper
varies depending on the connected printer.

Direct Printing
DATE PRINT Selects whether to print the date (shooting date). The date
format can be set using the date/time option in the SETUP
menu.
FILE NAME PRINT Selects whether to print the file name.
OPTIMIZE IMAGE Selects whether to optimize the image data (still image) prior to
printing on the printer.
PRINT SIZE Sets the print image size.
PRINT QUALITY Sets the print quality.
REPORT PRINT* Prints on forms.

8 Press the !" buttons to select the setting, and then


press the MENU/OK button.
• The display returns to the direct print menu.

9 Repeat Steps 7 and 8 to change other settings as


required.

131
Note ----------------------------------------------------------------------------------------------
• To specify the settings as the default settings
next time the camera is connected to the
printer, press the ADJ. lever when the screen
in Step 7 is displayed. When the screen at the
right appears, press the #$ buttons to select
[SET] and press the MENU/OK button.
• To use the settings last set the next time the
camera is connected to the printer, select
[CANCEL].

10 Press the MENU/OK button.


• The selected still images are sent to the printer and the [SENDING...]
screen appears.
• Pressing the DISP. button cancels the operation.
• When the images have been sent to the printer, the display returns to
the direct print playback mode screen and printing starts.

4
Printing Several Still Images
1 Check that the printer is ready
Direct Printing

to print.
• The [CONNECTING...] screen
appears.

2 Press the ADJ. lever.


• The direct print playback mode screen
appears.

3 Press the 9 (Thumbnail Display) button.


• The screen is divided into 12 frames and thumbnails are displayed
(Grid view).

4 Press the !"#$ buttons to


select an image for printing.
5 Press the MENU/OK button.
6 Press the !" buttons to set
the number of copies to print.
• Press the ! button to increase the
number of copies, or press the "
button to decrease the number of copies.
7 Press the #$ buttons to select the next image for printing.
132
8 Press the !" buttons to set the number of copies to
print.
9 Repeat Steps 7 and 8 to select all the still images to be
printed and the number of copies for each.
10 Press the MENU/OK button.
• The direct print menu appears.

11 Press the !" buttons to select


an item, and then press the $
button to display the detailed
options screen.
• When [CONNECTING...] is displayed,
the connection to the printer is not yet
established. When a connection is
established, [CONNECTING...]
disappears and [DIRECT PRINT]
appears. Proceed with this step after the connection is established. 4
• For available settings, see P.131.

Direct Printing
12 Press the !" buttons to select the setting, and then
press the MENU/OK button.
• The display returns to the direct print menu.

13 Repeat Steps 11 and 12 to change other settings as


required.
14 Press the MENU/OK button.
• The selected still images are sent to the printer and the [SENDING...]
screen appears.
• Pressing the DISP. button cancels the operation.
• When all the selected still images have been sent from the camera to
the printer, the camera display returns to the direct print playback
mode screen.
Note ----------------------------------------------------------------------------------------------
• Only images with a printer mark ( ) are printed. If you cancel printing and then try
to print again, make sure that the printer mark is on the images you want to print.
• The same still image can also be printed several times on a single sheet.
• The available items vary depending on the functions of the printer.
• To print images using the printer’s default settings, select [PRINTER SELECT] on the
detailed options screen.

133
5 Changing Camera Settings

SETUP Menu
You can change the camera settings by displaying the SETUP menu
from the shooting setting menu (GP.77) or playback setting menu.
(GP.113)
The SETUP menu enables you to set the items listed in the table below.
Setting Options [Default Settings] Refer to
FORMAT [CARD] P.137
FORMAT [INT. MEM.] P.138
LCD BRIGHTNESS P.139
REG. MY SETTINGS [SETTING1], SETTING2 P.140
STEP ZOOM ON, [OFF] P.142
ISO AUTO-HIGH [AUTO 400], AUTO 800, AUTO1600 P.143
AUTO POWER OFF OFF, [1 MIN.], 5 MIN., 30MIN. P.144
BEEP SOUND [ALL], SHUTTER P.145
VOL. SETTINGS FFF (Mute), JFF (Small), [JJF] (Medium), P.146
JJJ (Large)
5 LCD CONFIRM. OFF, [0.5SEC.], 1 SEC., 2 SEC., 3 SEC., 30 SEC. P.147
ADJ LEVER SET.1*1 *4 *1 *2 *3
[OFF] , [EXPO.CMP] , [WHT.BAL.] , [ISO] , QUALITY, P.148
Changing Camera Settings

ADJ LEVER SET.2*2 FOCUS, IMG SET, AE METER, CONT MDE,


ADJ LEVER SET.3*3 AUTO BKT, WITH SND
ADJ LEVER SET.4*4
ADJ SHTR BTN SET ON, [OFF] P.149
FNCTN. BTN. SET. OFF, [AF/MF], AE LOCK, EXPO.CMP, WHT.BAL., ISO, P.150
QUALITY, FOCUS, IMG SET, AE METER,
CONT MDE, AUTO BKT, WITH SND
AF AUX. LIGHT [ON], OFF P.151
RAW/JPEG SETTING [FINE], NORMAL, N640 P.152
DIGITAL ZOOM IMG [NORMAL], AUTO RSZ P.153
SHTG STGS WARNG. [ON], OFF P.155
ENLGE PHOTO ICON ON, [OFF] P.156
USB CONNECTION [MASS STR], ORIGINAL P.157
SEQUENTIAL NO. [ON], OFF P.159
DATE SETTINGS P.161
LANGUAGE/N* , ENGLISH, DEUTSCH, FRANÇAIS, ITALIANO, P.162
ESPAÑOL, , ,
VIDEO OUT MODE* NTSC, PAL P.163
* The default setting varies depending on where you purchased the camera.
134
Using the SETUP Menu
This explains how to make the settings.
Use the !"#$ buttons and MENU/OK button to select and set an
item.
1 Press the MENU/OK button.
• The shooting setting menu (or the playback setting menu) appears.

2 Press the $ button.


• The SETUP menu appears.

The menu items are


provided on six screens.

3 Press the !" buttons to select


the desired item.
• Press the " button at the bottom item
to display the next screen.
5

Changing Camera Settings


4 Press the $ button.
• The menu item settings are displayed.
5 Press the !" buttons to select
the setting.
6 Press the MENU/OK button, or
press the # button and then
the MENU/OK button.
• The SETUP menu disappears and the camera is ready for shooting or
playback.
• The SETUP menu may appear depending on the setting. In this case,
press the MENU/OK button again to return to the shooting or playback
screen.
Note ----------------------------------------------------------------------------------------------
For some functions, the setting selection method may differ from what is explained here.
For detailed operation, see the explanation of each function.
135
Changing the display ----------------------------------------------------------------------
You can select a screen by the screen number:
1 Press the # button to select a screen number
on the left of the screen.
2 Press the !" buttons to change screens.
3 Press the $ button to return to menu item
selection.

5
Changing Camera Settings

136
Preparing the SD Memory Card
(FORMAT [CARD])
If the error message [CARD ERROR] is displayed when an SD
memory card is loaded into the camera or the card has been used
with a computer or other device, you must format the card prior to
use with this camera.
Formatting is the process of preparing a card so image data can be
written on it.
Caution------------------------------------------------------------------------------------------
If you format a card that still has images stored on it, the images will be lost.

To format a card, follow the steps below.


1 Display the SETUP menu.
• For the operating procedure, see P.135.

2 Press the " button to select


[FORMAT [CARD]] and press
the $ button. 5
• A screen appears to confirm

Changing Camera Settings


formatting.

3 Press the #$ buttons to select


[YES] and then press the
MENU/OK button.
• Formatting starts. When it is done, the display returns to the SETUP
menu.
• If no SD memory card is loaded, a message will be displayed. After
turning the power off, load an SD memory card and repeat the
formatting process again.

4 Press the MENU/OK button.

Protecting your images from being deleted----------------------------------------


• Move the write-protection switch on the SD memory card to “LOCK” to prevent your
still images from being accidentally erased or the card from being formatted.
(GP.27)
• If you unlock the card (by returning the switch to its original position), it is once again
possible to erase images and format the card.

137
Formatting the Internal Memory
(FORMAT [INT. MEM.])
If the error message [FORMAT INTERNAL MEMORY] is displayed,
you must format the internal memory prior to use.
Caution------------------------------------------------------------------------------------------
Formatting the internal memory deletes all of the data recorded in the memory. If you
have images in the internal memory that you do not want to delete, copy the images to
the SD memory card before formatting the internal memory. (GP.123)

To format the internal memory, follow the steps below.


1 Display the SETUP menu.
• For the operating procedure, see P.135.

2 Press the " button to select


[FORMAT [INT. MEM.]] and
press the $ button.
• A screen appears to confirm
5 formatting.
Changing Camera Settings

3 Press the #$ buttons to select


[YES] and then press the
MENU/OK button.
• Formatting starts. When it is done, the
display returns to the SETUP menu.
4 Press the MENU/OK button.

138
Adjusting the Brightness of the LCD
Monitor (LCD BRIGHTNESS)
To adjust the brightness of the LCD monitor, follow the steps below.
1 Display the SETUP menu.
• For the operating procedure, see P.135.

2 Press the " button to select


[LCD BRIGHTNESS] and press
the $ button.
• The screen for setting the brightness
appears.

3 Press the !" buttons to


adjust the brightness.
• Move the slider on the LCD brightness
adjustment bar down to make the LCD
monitor darker and up to make it brighter. 5
The brightness of the LCD monitor
changes as the slider is moved along the

Changing Camera Settings


bar.
4 When you reach the desired
brightness, press the MENU/OK button.
• The display returns to the SETUP menu.

5 Press the MENU/OK button.

Caution------------------------------------------------------------------------------------------
When the LCD viewfinder is attached to the camera, you cannot adjust the brightness of
the LCD monitor.

Using the DISP. button to adjust the brightness ---------------------------------


When shooting, press and hold down the DISP. button to maximize the LCD brightness.
When the brightness is at the maximum setting, holding the DISP. button down returns
the brightness to the level set in [LCD BRIGHTNESS].

139
Registering Custom Settings
(REG. MY SETTINGS)
The My Settings function allows you to easily shoot with your
desired settings.
You can register two groups of settings as “My Settings”. Setting the
mode dial to MY1 or MY2 allows you to shoot with the settings set
in [SETTING1] or [SETTING2], respectively. (GP.76)
To register the current camera settings as My Settings, follow the
steps below.
1 Change the camera settings to the values you want to
register as My Settings.
2 Display the SETUP menu.
• For the operating procedure, see P.135.

3 Press the " button to select


[REG. MY SETTINGS] and
press the $ button.
5
• A confirmation message appears.
Changing Camera Settings

4 Select [SETTING1] or
[SETTING2] and press the
MENU/OK button.
• The current camera settings are
registered and the display returns to
the SETUP menu.
• If you do not want to register them,
press the DISP. button.

5 Press the MENU/OK button.

140
Settings Saved in by My Setting Function
Shooting mode (5/P/A/M/SCENE/3)
PIC QUALITY/SIZE
FOCUS
Focal distance used in manual focus
AE METERING
CONT. MODE
EXPOSURE COMP.
IMAGE WITH SOUND
DATE IMPRINT
WHITE BALANCE
ISO SETTING
CAMERA SHAKE COR
Zoom position
Macro
Flash
Self-timer
DISP. Mode
STEP ZOOM
DIGITAL ZOOM IMG 5
ENLGE PHOTO ICON

Changing Camera Settings

141
Changing the Step Zooming Setting
(STEP ZOOM)
Step zooming is the setting of the focal length with optical zooming,
which can be fixed to any of five levels (24, 28, 35, 50, 72 mm,
equivalent to that on a 35 mm camera).
Available Settings
ON (Step zooming on)
OFF (Step zooming off) *Default setting
To set step zooming, follow the steps below.
1 Display the SETUP menu.
• For the operating procedure, see P.135.

2 Press the " button to select [STEP ZOOM] and press


the $ button.
3 Press the !" buttons to select
the desired setting.
5
4 Press the MENU/OK button, or
Changing Camera Settings

press the # button and then


the MENU/OK button.

Note ----------------------------------------------------------------------------------------------
When using the wide conversion lens, the available focal lengths with optical zooming
are 19, 22, 28, 40, and 57 mm.

142
Changing the ISO AUTO-HIGH
Setting (ISO AUTO-HIGH)
You can change the upper limit of the ISO setting for [AUTO-HI]
(Auto high sensitivity) (GP.104) in [ISO SETTING] on the
shooting setting menu.
Available Settings
AUTO 400 *Default setting
AUTO 800
AUTO1600
To change the auto high sensitivity setting, follow the steps below.
1 Display the SETUP menu.
• For the operating procedure, see P.135.

2 Press the " button to select [ISO AUTO-HIGH] and


press the $ button.
3 Press the !" buttons to select
the desired setting. 5

4 Press the MENU/OK button, or

Changing Camera Settings


press the # button and then
the MENU/OK button.

Note ----------------------------------------------------------------------------------------------
Images shot with a higher sensitivity may appear grainy.

143
Changing the Auto Power Off Setting
(AUTO POWER OFF)
If you do not operate the camera for a set period of time, it shuts off
automatically to conserve battery power (Auto Power Off).
By default, auto power off is set to one minute, but you can change
this setting.
Available Settings
OFF (Auto Power Off is turned off)
1 MIN. *Default setting
5 MIN.
30MIN.
To change the auto power off setting, follow the steps below.
1 Display the SETUP menu.
• For the operating procedure, see P.135.

2 Press the " button to select [AUTO POWER OFF] and


press the $ button.
5
3 Press the !" buttons to select
Changing Camera Settings

the desired setting.


4 Press the MENU/OK button, or
press the # button and then
the MENU/OK button.

Note ----------------------------------------------------------------------------------------------
• To continue using the camera after auto power off turned the camera off, press the
POWER button to turn the camera on again. You can also press and hold the 6
(Playback) button for more than one second to turn on the camera in playback mode.
• Auto power off does not work when the camera is connected to a computer or printer.
• When using interval shooting, the [AUTO POWER OFF] setting is not valid and auto
power off does not work.

144
Changing the Beep Sound Setting
(BEEP SOUND)
During operation, the camera generates four types of sounds: start
sound, shutter release sound, focus sound, and beep sound.
Start sound : Sound when the camera is turned on.
Shutter release : Sound when the shutter release button is pressed.
sound
Focus sound : Sound when the shutter release button is half-pressed and the
camera focuses on the subject.
Beep sound : Error sound indicating an operation that cannot be performed.
Available Settings
ALL (All sounds on) *Default setting
SHUTTER (Shutter release sound and beep sound only)
To change the beep sound settings, follow the steps below.
1 Display the SETUP menu.
• For the operating procedure, see P.135.

2 Press the " button to select [BEEP SOUND] and press 5


the $ button.

Changing Camera Settings


3 Press the !" buttons to select
the desired setting.
4 Press the MENU/OK button, or
press the # button and then
the MENU/OK button.

145
Changing the Beep Sound Volume
(VOL. SETTINGS)
The beep sound volume can be changed.
Available Settings
FFF (Mute)

JFF (Small)

JJF (Medium) *Default setting

JJJ (Large)

To change the beep sound volume, follow the steps below.


1 Display the SETUP menu.
• For the operating procedure, see P.135.
2 Press the " button to select [VOL. SETTINGS] and
press the $ button.
3 Press the !" buttons to select
5 the desired setting.
4 Press the MENU/OK button, or
Changing Camera Settings

press the # button and then


the MENU/OK button.

146
Changing Image Confirmation Time
(LCD CONFIRM.)
Immediately after you press the shutter release button, the still
image taken is displayed on the screen for a moment so you can
check it. By default, the image confirmation time is set to 0.5
second, but this can be changed.
Available Settings
OFF (Image not displayed for confirmation)
0.5SEC. *Default setting
1 SEC.
2 SEC.
3 SEC.
30 SEC.
To change the image confirmation time, follow the steps below.
1 Display the SETUP menu.
• For the operating procedure, see P.135.
2 Press the " button to select [LCD CONFIRM.] and 5
press the $ button.

Changing Camera Settings


3 Press the !" buttons to select
the desired setting.
4 Press the MENU/OK button, or
press the # button and then
the MENU/OK button.

Caution------------------------------------------------------------------------------------------
When [LCD CONFIRM.] is set to 0.5 seconds, symbols such as the zoom bar may
remain on the monitor while the image is displayed.

Note ----------------------------------------------------------------------------------------------
It is convenient to set the image confirmation time to [30SEC.] to allow enough time to
view the image. This is particularly useful when using an LCD viewfinder. Even if you set
the image confirmation time to [30SEC.], you can half-press the shutter release button to
return to shooting mode and shoot a picture.

147
Assigning a Function to the ADJ.
Lever (ADJ LEVER SET.)
When any of a number of shooting functions is assigned to the ADJ.
lever, you can display the screen for that function with fewer button
operations and without displaying the shooting setting menu.
You can also use [ADJ LEVER SET.1] to [ADJ LEVER SET.4] to
assign a camera function that can be activated by pressing the ADJ.
lever.
Available Settings Refer to
OFF *Default setting for [ADJ LEVER SET.4] -
EXPO.CMP *Default setting for [ADJ LEVER SET.1] P.100
WHT.BAL. *Default setting for [ADJ LEVER SET.2] P.101
ISO *Default setting for [ADJ LEVER SET.3] P.104
QUALITY P.80
FOCUS P.83
IMG SET P.91
AE METER P.86
CONT MDE P.87
5
AUTO BKT P.93
WITH SND P.98
Changing Camera Settings

To assign a function to [ADJ LEVER SET.1] to [ADJ LEVER SET.4],


follow the steps below.
1 Display the SETUP menu.
• For the operating procedure, see P.135.
2 Press the " button to select [ADJ LEVER SET.1], [ADJ
LEVER SET.2], [ADJ LEVER SET.3], or [ADJ LEVER
SET.4], and then press the $ button.
3 Press the !" buttons to select
the desired setting.
4 Press the MENU/OK button, or
press the # button and then
the MENU/OK button.

Note ----------------------------------------------------------------------------------------------
For information on how to use the ADJ. mode, see P.64.
148
Changing the Shutter Release Button
Setting (ADJ SHTR BTN SET)
In ADJ. mode (GP.64), you usually press the MENU/OK button or
the ADJ. lever to set a setting.
When [ADJ SHTR BTN SET] is set to [ON], you can also set a
setting by half-pressing the shutter release button.
Available Settings Description
ON Press the MENU/OK button or half-press the shutter release
button to set the setting.
OFF *Default setting Press the MENU/OK button to set the setting.
To change the shutter release button setting, follow the steps
below.
1 Display the SETUP menu.
• For the operating procedure, see P.135.

2 Press the " button to select [ADJ SHTR BTN SET.] and
press the $ button.
5
3 Press the !" buttons to select

Changing Camera Settings


the desired setting.
4 Press the MENU/OK button, or
press the # button and then
the MENU/OK button.

149
Assigning a Function to the Function
Button (FNCTN. BTN. SET.)
When a function is assigned to the Fn (Function) button, you can
perform the assigned function, such as switching to auto focus or
manual focus, or locking the exposure, simply by pressing the Fn
(Function) button. You can also display the setting screen for the
assigned function without displaying the shooting setting menu.
Available Settings Refer to
OFF -
AF/MF *Default setting P.69
AE LOCK P.70
EXPO.CMP P.100
WHT.BAL. P.101
ISO P.104
QUALITY P.80
FOCUS P.83
IMG SET P.91
5 AE METER P.86
CONT MDE P.87
Changing Camera Settings

AUTO BKT P.93


WITH SND (IMAGE WITH SOUND) P.98
To assign a function to the Fn (Function) button, follow the steps
below.
1 Display the SETUP menu.
• For the operating procedure, see P.135.
2 Press the " button to select
[FNCTN. BTN. SET.] and
press the $ button.
3 Press the !" buttons to select
the desired setting.
4 Press the MENU/OK button, or
press the # button and then
the MENU/OK button.
Note ----------------------------------------------------------------------------------------------
For information on how to use the Fn (Function) button, see P.67.
150
Changing the AF Auxiliary Light
Setting (AF AUX. LIGHT)
You can set whether to use the AF auxiliary light when shooting with
auto focus.
When [AF AUX. LIGHT] is set to [ON], the AF auxiliary light lights
as required during shooting, and the auto focus distance is
measured.
To change the AF auxiliary light setting, follow the steps below.
1 Display the SETUP menu.
• For the operating procedure, see P.135.

2 Press the " button to select [AF AUX. LIGHT] and press
the $ button.
3 Press the !" buttons to select
the desired setting.
4 Press the MENU/OK button, or
press the # button and then 5
the MENU/OK button.

Changing Camera Settings


Note ----------------------------------------------------------------------------------------------
• When [AF AUX. LIGHT] is set to [ON], the AF auxiliary light lights when shooting in
dark surroundings and when it is difficult for the camera to measure the auto focus
distance.
• When you full-press the shutter release button with [AF AUX. LIGHT] set to [ON], the
AF auxiliary light may not light even when shooting in dark surroundings.

151
Changing the RAW Mode JPEG Image
Setting (RAW/JPEG SETTING)
When shooting with [PIC QUALITY/SIZE] set to RAW mode
(GP.80), a JPEG file associated with the RAW format file (.DNG
file) is recorded at the same time. You can change the picture
quality and image size of this JPEG file.
Available Settings Description
FINE Picture quality: Fine mode;
*Default setting Image size: Recorded at the same size as the RAW format file.
NORMAL Picture quality: Normal mode;
Image size: Recorded at the same size as the RAW format file.
N640 Recorded at the same picture quality and image size as [N640]
(GP.80) in [PIC QUALITY/SIZE].
To change the picture quality and image size settings of the JPEG
file, follow the steps below.
1 Display the SETUP menu.
• For the operating procedure, see P.135.
5
2 Press the " button to select [RAW/JPEG SETTING] and
Changing Camera Settings

press the $ button.


3 Press the !" buttons to select
the desired setting.
4 Press the MENU/OK button, or
press the # button and then
the MENU/OK button.

Note ----------------------------------------------------------------------------------------------
When [RAW/JPEG SETTING] is set to [N640] with [PIC QUALITY/SIZE] set to [RAW3:2],
black borders are added to the top and bottom of the JPEG image.

152
Using the Auto Resize Zoom
(DIGITAL ZOOM IMG)
This function allows you to crop and record a shot image.
Conventional digital zoom enlarges a portion of an image to a set
magnification. Whereas, auto resize zoom saves the cropped
portion of the image, the image quality is not decreased, however
the image size may become smaller. The image recording size
changes depending on the auto resize zoom magnification.
This function is available only when [PIC QUALITY/SIZE] is set to
3648 × 2736. (GP.80)
Available Settings
Available Settings Description
NORMAL Records the image at the image size set with [PIC QUALITY/
SIZE].
AUTO RSZ (Auto resize) Automatically resizes and then records the image.

Note ----------------------------------------------------------------------------------------------
The digital zoom is enabled when [PIC QUALITY/SIZE] is set to a size other than 5
3648 × 2736.
Zoom Magnification and Recorded Image Size

Changing Camera Settings


Zoom Magnification Image Size
3.0 times 3648 × 2736 (10M)
3.0 × approx. 1.1 times 3264 × 2448 (8M)
3.0 × approx. 1.4 times 2592 × 1944 (5M)
3.0 × approx. 1.8 times 2048 × 1536 (3M)
3.0 × approx. 2.9 times 1280 × 960 (1M)
3.0 × approx. 5.7 times 640 × 480 (VGA)

1 Display the SETUP menu.


• For the operating procedure, see P.135.

2 Press the " button to select [DIGITAL ZOOM IMG] and


press the $ button.

153
3 Press the !" buttons to select
[AUTO RSZ].
4 Press the MENU/OK button, or
press the # button and then
the MENU/OK button.

5 Press and hold the z


(Telephoto) button until the
maximum magnification is
reached on the zoom bar, then
momentarily release the
button, and then press the z
(Telephoto) button again.
• Press the z (Telephoto) button to
change the image size one factor and record the image.
• The size at which the image is recorded is displayed above the zoom
bar.

5 Caution------------------------------------------------------------------------------------------
• This function is not available when shooting with multi-shot mode or when scene
mode is set to [SKEW COR MODE]. If [AUTO RSZ] is set in these situations, the
Changing Camera Settings

digital zoom is activated instead.


• This function is not available when [PIC QUALITY/SIZE] is set to RAW mode.

154
Displaying a Settings Change
Warning (SHTG STGS WARNG.)
If the initial settings are changed for the following functions, you can
set the camera to have the icon of that function blink and to display
a warning message about the function with the changed setting for
a few seconds when the camera is turned on.
White balance, Focus, ISO setting, Exposure compensation
If you operate a camera button while an icon is blinking, the icon
stops blinking and lights steadily. If you operate a camera button
while the warning message is displayed, the message disappears.
Available Settings
ON (Enable warnings) *Default setting
OFF (Disable warnings)
To set the settings change warning, follow the steps below.
1 Display the SETUP menu.
• For the operating procedure, see P.135.
2 Press the " button to select [SHTG STGS WARNG.] 5
and press the $ button.

Changing Camera Settings


3 Press the !" buttons to select
the desired setting.
4 Press the MENU/OK button, or
press the # button and then
the MENU/OK button.

155
Enlarging Icon Display
(ENLGE PHOTO ICON)
The following icons are enlarged in normal symbol display.
(GP.59)
Flash, Macro Shooting, Self-timer, White balance, Focus,
Exposure compensation, ISO setting
When the icons are enlarged, the following items are not displayed:
Zoom bar/Focus bar, Date imprint, Image settings
To enlarge the icons on the screen, follow the steps below.
1 Display the SETUP menu.
• For the operating procedure, see P.135.

2 Press the " button to select [ENLGE PHOTO ICON] and


press the $ button.
3 Press the !" buttons to select
the desired setting.
5 4 Press the MENU/OK button, or
press the # button and then
Changing Camera Settings

the MENU/OK button.

Note ----------------------------------------------------------------------------------------------
The icons only on those screens with normal symbol displays (GP.59) are enlarged.
The icons on histogram screens (GP.59) are not enlarged.

156
Changing the USB Setting
(USB CONNECTION)
To transfer images to your computer using software, change the
[USB CONNECTION] setting depending on the software.
By setting [USB CONNECTION] to [MASS STR] on the SETUP
menu, you can view files in the camera and transfer files from the
camera to your computer using the USB cable without installing the
supplied software or USB driver.
Software used for transfer [USB CONNECTION] setting
Instead of using software, the computer recognizes the SD MASS STR* *Default setting
memory card or internal memory of the camera as a drive.
RICOH Gate La MASS STR *Default setting
/ORIGINAL*
(Either setting can be used.)
Auto Document Link ORIGINAL
* For Windows 98SE, set [USB CONNECTION] to [ORIGINAL].
When set to [ORIGINAL], the maximum size for a transferable SDHC memory card is 4 GB.
Caution------------------------------------------------------------------------------------------ 5
• Images in the camera cannot be deleted when [USB CONNECTION] is set to [MASS

Changing Camera Settings


STR].
• Do not format the SD memory card or internal memory from your computer when
connected via mass storage mode. Be sure to format using the camera.
• Be sure to stop the connection before removing the USB cable when connected in
mass storage mode.
• Files will not be properly transferred if the USB cable is removed while transferring
images from an SD memory card inserted in the camera to your computer before
stopping the connection.
Also, transferring to the internal memory is not available with this camera.

157
To change the USB setting, follow the steps below.
1 Display the SETUP menu.
• For the operating procedure, see P.135.

2 Press the " button to select [USB CONNECTION] and


press the $ button.
3 Press the !" buttons to select
the desired setting.
4 Press the MENU/OK button, or
# button and press the MENU/
OK button.

Note ----------------------------------------------------------------------------------------------
For how to download images from the camera to a computer using the USB cable, see
P.179-183.

5
Changing Camera Settings

158
Changing File Name Settings
(SEQUENTIAL NO.)
When you shoot a still image, it is stored on an SD memory card or
in the internal memory with a consecutively numbered file name
that is automatically assigned.
When you switch SD memory cards, you can set your camera to
continue consecutive numbering from the previously loaded card.
Available Settings
ON (Continue numbering) File names are automatically assigned to still images you take, in
*Default setting the format of “R” followed by seven digits, from R0010001.jpg to
R9999999.jpg.
With this setting, file numbering is continued from one card to the
next.
OFF (Do not continue File numbering is assigned, from RIMG0001.jpg to
numbering) RIMG9999.jpg, for each SD memory card.
When file name RIMG9999 is reached, no more data can be
recorded to that card.
To change the file name setting, follow the steps below.
5
1 Display the SETUP menu.

Changing Camera Settings


• For the operating procedure, see P.135.

2 Press the " button to select [SEQUENTIAL NO.] and


press the $ button.
3 Press the !" buttons to select
the desired setting.
4 Press the MENU/OK button, or
press the # button and then
the MENU/OK button.

159
Note ----------------------------------------------------------------------------------------------
• When data is recorded to the internal memory, files are assigned consecutively
numbered file names, just as if [SEQUENTIAL NO.] is set to [OFF].
• When images are transferred to a computer using RICOH Gate La (GP.181), the file
being transferred is renamed and saved. The file is saved with the name “RIMG****.jpg”
(where **** indicates a number) even if [SEQUENTIAL NO.] is set to [ON].

Caution------------------------------------------------------------------------------------------
When RIMG9999 is reached, no more files can be saved. In this case, move image data
from the SD memory card to the memory of the computer or a storage medium, and then
format the SD memory card.

5
Changing Camera Settings

160
Setting the Date and Time
(DATE SETTINGS)
You can shoot still images with the time or date stamped onto the
picture.
The date/time setting on the SETUP menu is explained here.
1 Display the SETUP menu.
• For the operating procedure, see P.135.
2 Press the " button to select
[DATE SETTINGS] and press
the $ button.

3 Press the !"#$ buttons to


set the year, month, date and
time. 5
• You can press and hold down the !"

Changing Camera Settings


buttons to quickly raise or lower the
setting.
• Press the #$ buttons to move to the
next item.
4 In [FORMAT], choose the date
and time format.
5 Check the information on the
screen and then press the
MENU/OK button.
• Once you have set the date and time,
the display returns to the SETUP
menu.
6 Press the MENU/OK button.
Note ----------------------------------------------------------------------------------------------
• If the battery is removed for more than one week, the date and time settings will be
lost. These settings must be made again.
• To retain the date and time settings, load a battery with adequate remaining power for
more than two hours.
161
Changing the Display Language
(LANGUAGE/N)
You can change the language displayed on the screen.
The default setting varies depending on where you purchased the
camera.
Available Settings
(Japanese)
ENGLISH
DEUTSCH (German)
FRANÇAIS (French)
ITALIANO (Italian)
ESPAÑOL (Spanish)
(Simplified Chinese)
(Traditional Chinese)
(Korean)
To change the display language, follow the steps below.

5 1 Display the SETUP menu.


• For the operating procedure, see P.135.
Changing Camera Settings

2 Press the " button to select


[LANGUAGE/N] and press
the $ button.
• The language selection screen
appears.

3 Press the !"#$ buttons to


select the desired setting.
4 Press the MENU/OK button.
• Once you have set the language, the
display returns to the SETUP menu.

5 Press the MENU/OK button.

162
Changing the Playback Method for
Viewing on TV (VIDEO OUT MODE)
You can view your still images and movies on a television screen by
connecting your camera to a television with the AV cable that came
with your camera. (GP.126)
Your camera is set to NTSC video format (used in North America
and other countries/regions) for use with television equipment and
other audiovisual equipment. If the equipment you want to connect
to uses PAL format (used in Europe and elsewhere), then switch
your camera to PAL format before connecting.
The default setting varies depending on where you purchased the
camera.
Available Settings
NTSC
PAL
To change the video format, follow the steps below.
1 Display the SETUP menu. 5
• For the operating procedure, see P.135.

Changing Camera Settings


2 Press the " button to select [VIDEO OUT MODE] and
press the $ button.
3 Press the !" buttons to select
the desired setting.
4 Press the MENU/OK or #
button.
• Once you have set the video format,
the display returns to the SETUP
menu.

5 Press the MENU/OK button.

163
6 Downloading Images to Your Computer

The screen images shown here may differ from the images
displayed on your computer depending on your computer OS.

For Windows
Downloading Images to Your Computer

Refer to P.184 for Macintosh.


You need to install software for transferring images to your
computer before you can download images from the camera.
Software installation is necessary for automatic image downloading
from the camera to your computer.
Caution------------------------------------------------------------------------------------------
Be sure to install the software before you connect
the camera to your computer. (GP.170)

Note ----------------------------------------------------------------------------------------------
6 • When [MASS STR] is selected for [USB CONNECTION] of the camera’s SETUP
menu, you can view the files in the camera without installing the supplied software or
USB driver. (GP.179) At the time of purchase, [MASS STR] is selected.
• For how to download images from the camera to your computer, see the “Software
User Guide” available from the Caplio Software CD-ROM. For how to display the
“Software User Guide”, see P.168.

164
Using the Caplio Software CD-ROM
Once you insert the Caplio Software CD-
ROM in the CD-ROM drive, the installer
screen appears automatically.

Downloading Images to Your Computer


Item Name Description Refer to
Installing the Software Use this button to install software required for P.170
handling the camera and images.
Installing DeskTopBinder Lite Use this button to install software required for P.173
handling the camera and images.
Browse User’s Manual Click this to display the “Software User Guide” P.168
(Software Version) (PDF).
Browse CD-ROM Content Click this to display the list of files contained on the P.168
CD-ROM.
Go to Adobe Digital Imaging Displays the home page of Adobe Systems Inc. (if -
web site connectable to Internet).

165
When [Installing the software] is clicked: (GP.170)
The following software is installed:
Software Windows Description
XP 98
RICOH Gate La O O Downloads images collectively.
Irodio Photo & Video O O Shot images can be displayed or edited and video
Downloading Images to Your Computer

Studio CDs can be created.


USB Driver - O Used to connect the camera to your computer when
[USB CONNECTION] is set to [ORIGINAL].
WIA Driver O - Used to connect the camera to your computer when
[USB CONNECTION] is set to [ORIGINAL].
XP: Windows XP/Vista
98: Windows 98SE/Me/2000
Note ----------------------------------------------------------------------------------------------
The camera is provided with Irodio Photo & Video Studio software that allows you to
display and edit images from your computer. For how to use Irodio Photo & Video Studio,
see the displayed “Help”.
For the latest information about Irodio Photo & Video Studio, access the Web page of
Pixela Co., Ltd. (http://www.pixela.co.jp/oem/ricoh/e/index.html).

166
When [Installing DeskTopBinder Lite] is clicked:
(GP.173)
The following software is installed:
Software Windows Description
XP 98
DeskTopBinder Lite O O Software used to manage business documents.

Downloading Images to Your Computer


Images in the camera can be downloaded to
DeskTopBinder Lite using the Auto Document Link
that monitors document updating.
USB Driver O O Used to connect the camera to the computer.
WIA Driver O - Used to download images.
XP: Windows XP/Vista
98: Windows 98SE/Me/2000
Caution------------------------------------------------------------------------------------------
DeskTopBinder Lite is compatible with Windows 98SE but not Windows 98.

Note ----------------------------------------------------------------------------------------------
• For details about the DeskTopBinder Lite, refer to the Introduction Guide, Setup
Guide, Auto Document Link Guide, and Help supplied with the DeskTopBinder Lite.
• For details about the Auto Document Link, refer to the Auto Document Link Guide.

167
When [Browse User’s Manual (Software Version)] is
clicked:
The “Software User Guide” (PDF file) on the Caplio Software CD-
ROM is displayed on your computer screen.
If you have Acrobat Reader installed on your computer, simply click
[Browse User’s Manual (Software Version)]. Acrobat Reader must
Downloading Images to Your Computer

be installed to view the PDF file. (GP.175)


When [Browse CD-ROM Content] is clicked:
You can check folders and files on the CD-ROM. The CD-ROM
contains not only the software installed by clicking [Installing the
software] but also Acrobat Reader software. This software product
runs on Windows.
For the installation of Acrobat Reader, see P.175.
Note ----------------------------------------------------------------------------------------------
• For details about Acrobat Reader, see Help for Acrobat Reader.
• To install Irodio Photo & Video Studio alone, double-click “Irodio Photo & Video
Studio.exe” in the Irodio Photo & Video Studio folder.

168
System Requirements for Using Caplio
Software CD-ROM
The following environments are necessary for using Caplio
Software CD-ROM.
Please check your computer, or the computer’s user manual.

Downloading Images to Your Computer


Operating Systems Windows 98 Second Edition
Supported Windows 2000 Professional
Windows Me
Windows XP Home Edition/Professional
Windows Vista
CPU Windows 98SE/2000/Me/XP: Pentium® lll 500 MHz or faster
Windows Vista: Pentium® lll 1 GHz or faster
Memory Windows 98SE: 256 MB or more
Windows 2000: 256 MB or more
Windows Me: 256 MB or more
Windows XP: 256 MB or more
Windows Vista: 512 MB or more
Hard drive space required Windows 98SE: 160 MB or more
for installation Windows 2000: 160 MB or more
Windows Me: 160 MB or more
Windows XP: 160 MB or more
Windows Vista: 160 MB or more
Display Resolution 1024 × 768 pixels or greater 6
Display Colors 65,000 colors or greater
CD-ROM Drive A CD-ROM drive compatible with the above-mentioned computer
USB Port A USB port compatible with the above-mentioned computer

Caution------------------------------------------------------------------------------------------
• If your computer has an upgraded OS, the USB function may not work normally, so it
cannot be supported.
• The provided software may not operate properly if changes are made to the operating
system, such as with patches and service package releases.
• The camera does not support connection to a USB port added by using an extension
function (PCI bus or other).
• If used in conjunction with a hub or other USB devices, the software may not work
properly.
• When dealing with movies and other large files, a larger memory environment is
recommended.
• When using Windows 98SE, the USB setting must be changed to [ORIGINAL].
(GP.157)

169
Installing the Software Required for Handling
the Camera and Images
Install the required software on your computer before connecting
the camera.
Caution------------------------------------------------------------------------------------------
Downloading Images to Your Computer

• Do not install the software when the camera is connected to your computer with a USB
cable.
• If you happened to connect your camera to the computer (resulting in the [Add New
Hardware Wizard] screen appearing on your computer screen), simply click [Cancel],
and after disconnecting your camera, install the software on your computer.
• If software is already installed from a Caplio Software CD-ROM from a previous
model, a message stating that the old software must be uninstalled before installing
the new one is displayed.
Follow the message instructions and uninstall the old software before installing the
new software. Functions of the old model can still be used as before.
If DU-10 is installed, it is replaced by Caplio Viewer (an upgraded version of DU-10).
If the old software is uninstalled before the message is displayed, Caplio Viewer is not
installed even if the new software is installed. (For how to uninstall the software, see
P.176.)
• For Windows Vista, Windows XP or Windows 2000, administrator privileges are
required to install the software.
• Ricoh Gate La is not network-compatible. Use as a stand-alone application.
6 Here is an example of the Windows XP screen.
1 Start your computer and insert
the Caplio Software CD-ROM
in the CD-ROM drive.
Operating systems other than
Windows Vista
• The installer screen appears
automatically.
Windows Vista
• The Autorun screen appears automatically.
• Select [Run Autorun.exe]. The installer screen appears automatically.

170
2 Click [Installing the software].
Operating systems other than Windows Vista
• After a while, the [Choose Setup Language] screen appears.
Windows Vista
• A screen appears to confirm user account management.
• Select [Allow] for the access request to the computer. After a while, the
[Choose Setup Language] screen appears.

Downloading Images to Your Computer


3 Confirm the language, and then click [OK].
• The [Welcome to the InstallShield Wizard for Caplio Software] screen
appears.
4 Click [Next].
• The [Choose Destination Location]
screen appears.

5 Confirm where you want to


install and then click [Next].
• The [Select Program Folder] screen
appears.

6
6 Confirm the destination
location and then click [Next].
• The Irodio Photo & Video Studio
installer starts. Install Irodio Photo &
Video Studio following the messages
displayed on the screen.
Depending on your computer, it may
take some time until the next screen is
displayed.
• When installation of Irodio Photo &
Video Studio is completed, a dialog
box appears, indicating that all
software applications have been
installed.

171
7 Click [Finish].
• A dialog box indicating that installation of Caplio Software is complete
appears.

8 Click [Finish].
9 Restart your computer.
Downloading Images to Your Computer

Note ----------------------------------------------------------------------------------------------
You can remove (uninstall) the software. (GP.176)

172
Installing the DeskTopBinder Lite
DeskTopBinder Lite is used for managing business documents. As
well as still images captured with a digital camera, you can manage
a variety of documents, including documents input by scanner,
documents created with various applications and image files. You

Downloading Images to Your Computer


can also store files with different formats in a single document.
Images downloaded from the camera can be saved to
DeskTopBinder Lite using the Auto Document Link for monitoring
document updating.

Note ----------------------------------------------------------------------------------------------
For how to use DeskTopBinder Lite, refer to the Introduction Guide, the Setup Guide, and
the DeskTopBinder Lite - Auto Document Link Guide that are installed with
DeskTopBinder Lite.

Caution------------------------------------------------------------------------------------------
• If you happened to connect your camera to the computer (resulting in the [Add New
Hardware Wizard] screen appearing on your computer screen), simply click [Cancel],
and after disconnecting your camera, install the software on your computer.
• For Windows XP or Windows 2000, administrator privileges are required to install the
software.
• To download images from the camera using the Auto Document Link of
DeskTopBinder Lite, install the Caplio Software before installing DeskTopBinder
Lite.(GP.170) The driver included in the Caplio Software is required to use the Auto 6
Document Link.
• If [Caplio Digital Camera] is set as the monitoring destination of the Auto Document
Link, select [ORIGINAL] for [USB CONNECTION] on the camera menu.(GP.157)

Here is an example of the Windows XP screen.


1 Start your computer and insert
the Caplio Software CD-ROM
in the CD-ROM drive.
• The installer screen appears
automatically.

173
2 Click [Installing DeskTopBinder Lite].
• After a few moments, the [Welcome to the InstallShield Wizard for
Caplio Software S] screen appears.

3 Click [Next].
• After a few moments, the [Choose Destination Location] screen
appears.
Downloading Images to Your Computer

4 Confirm where you want to


install and then click [Next].
• The [Select Program Folder] screen
appears.

5 Confirm the destination


location and then click [Next].
6 Click [OK].
7 Click [DeskTopBinder Lite].
• The DeskTopBinder Lite installer starts.
• Install DeskTopBinder Lite following the messages displayed on the
screen.
• When the screen where you verify digital ID is displayed, click [OK].
Caution------------------------------------------------------------------------------------------
• DeskTopBinder Lite cannot coexist with a different version of DeskTopBinder Lite,
6 DeskTopBinder Professional, or Job Binding. Before installing DeskTopBinder Lite,
uninstall these applications. The data used in the previous application can be saved
and inherited by DeskTopBinder Lite. However, when the previous application is
DeskTopBinder Professional, some functions will no longer be available.
• When capturing images from the camera using the Auto Document Link of the
DeskTopBinder Lite, deselect the [Saves automatically when connected to USB]
check box in the [Option settings] dialog box displayed by selecting [Option settings]
on the [RICOH Gate La Settings] menu. (Refer to the “Software User Guide”.) Before
capturing images from the camera, set the date and time using the [DATE SETTINGS]
option of the camera. (GP.161)
• If you turned the camera off and then on again while connected to the computer with
DeskTopBinder Lite open, reboot the computer with the camera connected.

174
Installing Other Software on Your Computer
Caution------------------------------------------------------------------------------------------
• Do not install the software when the camera is connected to your computer with a USB
cable.
• For Windows Vista, Windows XP or Windows 2000, administrator privileges are

Downloading Images to Your Computer


required to install the software.

Acrobat Reader
Acrobat Reader is required to display the operation manual (PDF
file).
If the computer is running under Windows, Acrobat Reader can be
installed. Acrobat Reader need not be installed if already installed
on your computer.
1 Start your computer, and insert
the included Caplio Software
CD-ROM into the CD-ROM
drive.
• The installer screen appears
automatically.
2 Click [Browse CD-ROM
Content]. 6
• The files on the CD-ROM are listed.

3 Double-click the [Acrobat] folder.


4 Double-click the [English] folder.
5 Double-click [ar500enu] (ar500enu.exe).
• A screen appears to confirm user account management for Windows
Vista. Select [Continue].
6 Install Acrobat Reader by following the messages
displayed.

175
Uninstalling the Software
Caution------------------------------------------------------------------------------------------
• For Windows Vista, Windows 2000/XP, administrator privileges are required to
uninstall the software.
• If any other program is active or unsaved data remains, save the data and terminate
Downloading Images to Your Computer

the program before uninstalling.


• If you install both Irodio Photo & Video Studio and the DeskTopBinder Lite and then
uninstall either one, camera connection to the computer may fail. In this case, uninstall
both [Caplio Software] and [Caplio Software S] and then install only the required one.

Caplio Software
1 Click [Start] on the Windows task bar.
2 Select [Settings]-[Control Panel] ([Control Panel] for
XP).
3 Double-click the [Add/Remove Programs] icon (or the
[Add or Remove Programs] icon in Windows XP).
4 Select [Caplio Software] (select [Caplio Software S] if
you have installed the DeskTopBinder Lite), and then
click the [Change/Remove] button.
6
5 Confirm file deletion and click [OK].
• The [Shared File Detected] dialog box appears.
6 Select the [Don’t display this message again.] check
box, and then click [Yes].
• The uninstallation process begins. When it is finished, close the
displayed window.

176
Irodio Photo & Video Studio
1 Click [Start] on the Windows task bar.
2 Select [Settings]-[Control Panel] ([Control Panel] for
XP).
3

Downloading Images to Your Computer


Double-click the [Add/Remove Programs] icon (or the
[Add or Remove Programs] icon in Windows XP).
4 Select [Irodio Photo & Video Studio] and then click
[Change/Remove].
5 Confirm file deletion and click [OK].
• The uninstallation process begins. When it is finished, close the
displayed window.
6 Restart your computer.

177
Downloading Images to Your Computer
After installing the software on your computer, connect your camera
to the computer.
Depending on the software you are using, change the [USB
CONNECTION] setting on the SETUP menu of the camera.
Downloading Images to Your Computer

(GP.157)
1 Make sure the camera power is off.
2 Connect the USB cable to the
USB port of your computer.

3 Connect the USB cable to the


USB terminal of your camera.
• Your camera turns on and the
computer automatically reads the
necessary files.

4 RICOH Gate La starts and


6 image transfer begins automatically.
5 When image transfer is completed, disconnect the
camera and the computer. (GP.183)

Note ----------------------------------------------------------------------------------------------
• For how to use RICOH Gate La, refer to the “Software User Guide” (PDF file)
contained in the provided CD-ROM. (GP.165)
• If image transfer does not begin, re-start your computer and perform steps 3 to 5
again.

178
Downloading Images Without Using the Caplio
Software
You can download images from the camera to a computer without
having to use software.
1 Change [USB CONNECTION] to [MASS STR] on the

Downloading Images to Your Computer


SETUP menu. (GP.157)
2 Make sure that the camera power is off.
3 Connect the accessory USB cable to a USB port of your
computer.
4 Connect the USB cable to the
USB terminal of your camera.
• Your camera turns on.
• Your computer automatically reads a Example of the display in
file necessary for recognizing the Windows XP
camera as a drive.
• After this preparation, the camera is displayed as a drive at [My
Computer] (Windows) or Desktop (Macintosh).

5 From the displayed drive,


copy a file to the desired
location. 6
• The figure at right shows the
folder configuration in the drive.
• When the contents of the internal
memory are displayed, the drive
name is [RICOHDCI].

Example of the display in Windows XP

Caution------------------------------------------------------------------------------------------
• Mass storage mode is not available on this camera if you are using Windows 98SE.
Set to [ORIGINAL]. (GP.157)
• Do not turn off the camera or disconnect the USB cable during image transfer.
• If a file with the same name already exists at the destination, it is overwritten. If you
do not want the file to be overwritten, rename the file or transfer data to another folder.

179
Note ----------------------------------------------------------------------------------------------
When an SD memory card is loaded, its files are displayed. Otherwise, files in the internal
memory are displayed.

Downloading images from an SD memory card ----------------------------------


It is possible to download images from an SD memory card to the computer via a PC card
slot or card reader. Depending on the type of PC card slot or card reader, a memory card
Downloading Images to Your Computer

adapter may be required when using an SD memory card. If the SD memory card can be
used in the PC card slot, no memory card adapter is required.
• Images are stored in an SD memory card in the hierarchy shown below.

Image files

Example of the display in Windows XP


Card Reader
This is a device connected to a computer to read the contents of cards. In addition to the
memory card adapter-type, there are card readers compatible with various types of
cards, into which you can directly load an SD memory card.
Use a card reader that is compatible with your computer’s operating system and the size
6
of the SD memory card.

Caution------------------------------------------------------------------------------------------
Images downloaded to your computer using [Import pictures] in Windows Vista cannot
be displayed with this camera.

180
Using the Original Driver to Download Images
The Original Driver is used to download images when [USB
CONNECTION] on the camera is set to [ORIGINAL]. (When using
Windows 98SE or Auto Document Link)
Connecting the Camera to the Computer for the First

Downloading Images to Your Computer


Time
The first time you connect your camera to the computer using a
USB cable, the [Found New Hardware Wizard] screen appears.
(Does not appear on Macintosh, Windows 98SE/2000.)
Here is an example of the Windows XP screen.
1 Select [Install the software
automatically
(Recommended)].
2 Insert the Caplio Software CD-
ROM into the CD-ROM drive on
your computer.
• Installation of the WIA driver
automatically starts. If the CD-ROM is already on your computer when
the [Found New Hardware Wizard] screen is displayed, simply click
[Next] to start installation.
6
3 If the subsequent screen is
displayed, click the [Next]
button.
• This product has been sufficiently
tested at our company and has been
confirmed to function correctly.

181
Note ----------------------------------------------------------------------------------------------
• Screens to confirm security and user accounts appear for Windows Vista. However,
screens are mostly the same as the ones of Windows XP.
• By default, the WIA driver is installed in the following location:
Specify the folder if the CD-ROM is not available.

My Computer
Downloading Images to Your Computer

Local Disk

Program Files
Caplio Software
WIA driver

4 Select [RICOH Gate La], check


[Always use this program for
this action] check box, and
then click [OK].
• To load images from the camera with
assistance from the Windows XP
“Scanner and Camera Wizard”, select
[Microsoft Scanner and Camera
Wizard].
• Leaving the [Always use this program
6 for this action] check box unchecked
causes the [Caplio GX100] screen to be displayed each time you
transfer images from the camera, thereby allowing you to choose
whether to use [RICOH Gate La] or the [Microsoft Scanner and
Camera Wizard] for image transfers.
• If your PC is installed with Windows XP Service Pack 2 and a warning
message is displayed, see P.193.
Note ----------------------------------------------------------------------------------------------
• If the computer does not recognize the camera, uninstall the software (GP.176)
and install it again.
• When downloading images from your camera, load a battery with adequate remaining
power in the camera. Use of the AC adapter (sold separately) is recommended.
• When transferring images to a computer using RICOH Gate La, the file being
transferred is renamed and saved.

182
Disconnecting the Camera from Your Computer
If images are downloaded using RICOH Gate La or the [Scanner
and Camera Wizard], turn the camera off after downloading images
and disconnect the USB cable.
Perform the following operations when disconnecting the camera

Downloading Images to Your Computer


from your computer. (The display shown below is when connected
to Windows XP in [MASS STR]. The terms are different for other
operating systems but the operations are the same.)
1 Double-click the [Safely Remove
Hardware] icon at the right end of
the task bar.
2 Select [USB Mass Storage Device] and click [Stop].
3 Check that [USB Mass Storage Device] is selected and
click [OK].
4 Click [Close].
5 Disconnect the USB cable.

Note ----------------------------------------------------------------------------------------------
• If the USB cable is disconnected without disabling the connection, the Unsafe 6
Removal of Device screen may be displayed.
• Be sure to stop the connection before removing the USB cable when connected in
mass storage mode.
• Do not disconnect the USB cable during image downloading. Make sure that
downloading has completed, disable the connection, and then disconnect the cable.

183
For Macintosh
Refer to P.164 for Windows.
This camera supports the following Macintosh operating systems.
• Mac OS 9.0 to 9.2.2
Downloading Images to Your Computer

• Mac OS X 10.1.2 to 10.4.8


This function is not available on this camera if you are using Mac
OS 8.6.

Downloading Images to Your Computer


1 Set [USB CONNECTION] to [MASS STR] on the SETUP
menu.
2 Make sure that the camera power is off.
3 Connect the accessory USB
cable to a USB port of your
computer.

6
4 Connect the USB cable to the
USB terminal of your camera.
• Your camera turns on.
• Your computer automatically reads
the file necessary for recognizing the
camera as a drive.
• After this preparation, the camera is
displayed as a drive on the Desktop.

5 From the displayed drive,


copy a file to the desired
location.
• The figure below shows the folder
configuration in the drive.
• When the contents of the internal
memory are displayed, the drive
name is [RICOHDCI].

184
Disconnecting the Camera from Your Computer
1 Drag and drop the displayed drive or the volume icon to
the “Trash”.
• If a screen appears prompting you to enter the administrator’s
password, enter the password.

Downloading Images to Your Computer


2 Disconnect the USB cable.

Note ----------------------------------------------------------------------------------------------
• You can also click [Eject] on the [Special] menu in Mac OS 9 or the [File] menu in Mac
OS X to cancel the connection.
• If the USB cable is disconnected without disabling the connection, the Unsafe
Removal of Device screen may be displayed.
• Be sure to stop the connection before removing the USB cable when connected in
mass storage mode.
• Do not disconnect the USB cable during image downloading. Make sure that
downloading has completed, disable the connection, and then disconnect the cable.

185
7 Appendices

Troubleshooting

Error Messages
If an error message is displayed on the screen, take the
corresponding action.
Error Message Cause and Action Refer to
INSERT CARD No card is loaded. Insert a card. P.30
USE THE SETUP MENU TO SET The date is not set. Set the date. P.161
THE DATE.
FILE NUMBER OVER LIMIT The file number limit has been exceeded. Use another card. P.159
P.160
UNMATCHED FILE The camera cannot display this file. Check the file contents -
on your computer, and then delete the file.
INSUFFICIENT MEMORY. Because there is not sufficient capacity on the card, all the P.27
CONTINUE? files cannot be copied. Use another card.
PROTECTED You are trying to delete a protected file. P.115
CARD IS WRITE-PROTECTED. The card is “Locked (write-protected)”. Unlock the card. P.27
Appendices

PRINT SETTINGS CANNOT BE This file (movie or other file) cannot be selected for printing. -
SET FOR THIS FILE.
INSUFFICIENT MEMORY Files cannot be stored. Make sure there is enough free P.56
space or delete unwanted files. P.137
P.138
The image print number limit has been exceeded. Select an -
image and set the number to 0.
7 FORMAT INTERNAL MEMORY You must format the internal memory. P.138
INITIALIZE THE CARD. The card is not formatted. Format the card with this camera. P.137
CARD ERROR Reformat the card. If, after doing so, the error message still P.137
appears, the card may be faulty. Do not use the card.
WRITING TO DATA Writing file to memory. Wait until writing finishes. -
NO FILE There are no files that can be played back. -
CANNOT RECORD The number of remaining shots is 0. Switch to another card P.27
or the internal memory.
REMOVE LENS CAP. The camera does not start because the lens cap is still on P.32
the camera. Remove the lens cap.
REMOVE LENS CAP AND The camera does not start because the lens cap is still on P.32
PRESS PLAYBACK BUTTON. the camera. Remove the lens cap and press the 6
(playback) button or the POWER button to turn on the
camera.

186
Camera Troubleshooting

Power Supply

Problem Cause Solution Refer to


The camera does not Battery is not loaded or is Load the rechargeable battery P.29
turn on. exhausted. correctly or charge the battery as P.30
required. Use the AC adapter as P.199
required. Replace the alkaline
batteries with new batteries.
A (manganese dry cell or other) Use the dedicated rechargeable P.25
unacceptable battery is used. battery or alkaline batteries.
The AC adapter is not connected Reconnect it properly. P.199
correctly.
The camera is automatically turned Turn the camera back on. P.32
off by auto power off.
The battery is loaded in wrong Load correctly. P.30
direction.
The camera turns off The camera was left unattended Turn the camera back on. P.32
during use. and unused, so auto power off
turned it off.
Battery is running low. Charge the rechargeable battery P.29
or use the AC adapter. Replace P.30
the alkaline batteries with new P.199

Appendices
batteries.
A (manganese dry cell or other) Use the dedicated rechargeable P.25
unacceptable battery is used. battery or alkaline batteries.
The camera does not Camera malfunction. Remove the battery and load it P.30
turn off. again. Reconnect the AC adapter P.199
cable properly, if using.
The battery has been A (manganese dry cell or other) Use the dedicated rechargeable P.25
fully charged, but: unacceptable battery is used. battery or alkaline batteries. 7
• The battery mark is
displayed, indicating
a low battery level.
• The camera turns off.
Cannot charge the Battery has reached the end of its Replace with a new battery. P.30
battery. useful life.
Battery runs out quickly. It is being used at extreme high or - -
low temperatures.
Many shots are being taken in dark - -
places or other location requiring
extensive use of flash.

187
Shooting

Problem Cause Solution Refer to


The camera does not Battery is exhausted. Charge the rechargeable battery P.29
shoot even if you press or use the AC adapter. Replace P.30
the shutter release the alkaline batteries with new P.199
button. batteries.
The camera is not on or it is not in Press the POWER button to turn P.32
the shooting mode. the camera on or press the 6 P.52
(Playback) button to select the
shooting mode.
The camera is in playback mode. Press the 6 (Playback) button -
to select the shooting mode.
The shutter release button is not Press the shutter release button P.38
pressed all the way. all the way. P.39
The SD memory card is not Format the card. P.137
formatted.
The SD memory card is full. Load a new card, or delete P.30
unwanted files. P.56
The SD memory card has reached Load a new SD memory card. P.30
the end of its useful life.
The flash is charging. Wait until the Auto Focus/Flash P.44
lamp stops blinking.
The SD memory card is locked. Unlock the card. P.27
Appendices

The contact surface of the SD Wipe with a soft, dry cloth. -


memory card is dirty.
Unable to view the shot The image confirmation time is too Lengthen the image confirmation P.147
image. short. time.
Images do not appear The camera is not on or the LCD Turn the camera on or adjust the P.32
on the LCD monitor. monitor is dark. brightness of the LCD monitor. P.139
The LCD monitor is off. Press the VF/LCD button to turn P.59
7 the LCD monitor on.
The LCD viewfinder is selected. Press the VF/LCD button to P.59
switch to the LCD monitor.
The VIDEO/AV cable is connected. Disconnect the VIDEO/AV cable. P.126
Images do not appear The LCD viewfinder is not properly Make sure the LCD viewfinder is -
on the LCD viewfinder. attached to the camera. properly attached to the camera.
Although the camera is The lens or AF window is dirty. Wipe clean with a soft, dry cloth. P.17
set to auto focus, it is The subject is not in the center of Shoot with focus lock. P.39
unable to focus. the shooting range.
It is a hard-to-focus subject. Shoot with focus lock or manual P.39
focus. P.84

188
Problem Cause Solution Refer to
The picture is blurred. You moved the camera when Hold the camera with your elbows P.36
pressing the shutter release button. pressed against your body. P.106
Use a tripod.
Use the camera shake correction
function.
When shooting in a dark place Use the flash. P.44
(such as indoors), the shutter Raise the ISO setting. P.104
speed slows down and pictures Use the camera shake correction P.106
become easily blurred. function.
The flash does not fire or The flash is not open. Slide the F (Flash) OPEN switch P.44
the flash cannot charge. to the outside to open the flash.
The flash cover is not fully raised. Do not press or cover the flash P.44
cover. Alternatively, reposition
the angle of the LCD viewfinder to
allow the flash to open.
The flash cannot be used in the To shoot with the flash, change P.44
following cases: the settings or mode. P.87
• When white balance bracket is set P.94
• In multi-shot mode P.109
• In movie mode P.205
In scene modes, the flash is
disabled by default.
The flash is set to flash off. Open the flash. Use the F (Flash) P.44
button to cancel flash off.
Battery is running low. Charge the rechargeable battery or P.29
P.30

Appendices
use the AC adapter. Replace the
alkaline batteries with new batteries. P.199
Even though the flash The distance to the subject is Get closer to your subject and P.44
fired, the picture is dark. greater than 3.0 meters in shoot.
telephoto or greater than 5.0
meters in wide-angle.
The subject is dark. Correct the exposure. (Exposure P.100
compensation also changes the
light intensity of the flash.) 7
The flash cover is not fully raised. Do not press or cover the flash P.44
cover. Alternatively, reposition
the angle of the LCD viewfinder to
allow the flash to open.
The image is too bright. The light intensity of the flash is not Move a little away from the P.44
appropriate. subject or illuminate the subject
with another light source instead
of using the flash.
Subject is overexposed. Correct the exposure. P.72
Decrease the exposure time. P.100
The brightness of the LCD monitor Adjust the brightness of the LCD P.139
is not appropriate. monitor.
The image is too dark. The shot was taken in a dark place Open the flash. Use the F (Flash) P.44
while set to flash off. button to cancel flash off.
The subject is underexposed. Correct the exposure. P.72
Increase the exposure time. P.100
The brightness of the LCD monitor Adjust the brightness of the LCD P.139
is not appropriate. monitor.
189
Problem Cause Solution Refer to
The image lacks natural The picture was shot in conditions Add a white object to the P.101
color. that made it difficult for auto white composition or use a white
balance to adjust the white balance. balance setting other than auto.
The date or recording The screen display function is set Press the DISP. button to change P.59
information does not to no display. the display.
appear on the screen.
The brightness of the You are using AF in a dark place or This is normal. -
LCD monitor changes when the auto focus range and
during AF. surrounding brightness are different.
There is a vertical smear This is a phenomenon that occurs This is normal. -
on the image. when a bright subject is shot. It is
called the smear phenomenon.
Appendices

190
Playback/Deleting

Problem Cause Solution Refer to


Cannot play back, or the
The camera is not in playback Press the 6 (Playback) button. P.52
playback screen does mode.
not appear. The VIDEO/AV cable is not Reconnect it properly. P.126
connected properly.
The VIDEO OUT MODE setting is Set it to the correct format. P.163
incorrect.
The contents of the SD No SD memory card is loaded, or Load a card with stored images. P.30
memory card cannot be an SD memory card with no stored
played back, or the images is loaded.
playback screen does You played back an SD memory Load a card that was formatted P.30
not appear. card that was not formatted with and recorded with this device. P.137
this device.
You played back an SD memory Load a normally recorded card. -
card that was not recorded
normally.
The contact surface of the SD Wipe with a soft, dry cloth. -
memory card is dirty.
There is something wrong with the Play back images from another -
SD memory card. card and if there is nothing wrong
with the card, the camera is okay.
There may be something wrong
with the card, so do not use it.

Appendices
The LCD monitor turned Battery is running low. Charge the rechargeable battery P.29
off. or use the AC adapter. Replace P.30
the alkaline batteries with new P.199
batteries.
The camera was left unattended Turn the camera back on. P.32
and unused, so auto power off
turned it off.
A file cannot be deleted. The file is protected. Unprotect the file. P.115
7
The SD memory card is locked. Unlock the card. P.27
Cannot format the SD The SD memory card is locked. Unlock the card. P.27
memory card.

191
Other Problems

Problem Cause Solution Refer to


Cannot load the SD The card is facing the wrong way. Load correctly. P.30
memory card.
The camera does not Battery is running low. Charge the rechargeable battery P.29
operate even when the or use the AC adapter. Replace P.30
buttons are pressed. the alkaline batteries with new P.199
batteries.
Camera malfunction. Press the POWER button to turn P.32
the camera off, and then press
the POWER button to turn the
camera on again.
Remove the battery and load it P.30
again. Reconnect the AC adapter P.199
cable properly, if using.
The date is incorrect. The correct date/time are not set. Set the correct date/time. P.161
The set date disappeared. The battery was removed. If the battery is removed for about P.161
one week, the date setting will be
lost. Make the settings again.
Auto power off does not Auto power off is set to [OFF]. Set the time for auto power off. P.144
work.
The beep sound cannot The beep sound volume is turned Use [VOL. SETTINGS] to set the P.146
be heard. off. volume to a setting other than
mute.
Appendices

Images do not appear The VIDEO OUT MODE setting is Set it to the correct format. P.163
on the TV. incorrect.
The AV cable is not connected. Connect the AV cable properly. P.126
The TV is not correctly set to Check that the TV is correctly set -
VIDEO IN. to VIDEO IN.

192
Software and Computer Troubleshooting
For details about the software, refer to the “Software User Guide”
(PDF file).

Warning Messages Under Windows XP Service Pack 2


When software for your Ricoh digital camera is used on a computer
with Windows XP Service Pack 2 installed, the following warning
message may appear at software activation or USB connection.
With this in mind, refer to the following:
When this warning message is displayed:
1 Check the information
provided on the message
screen to make sure that it
comes from a reputable
source, and then click the
[Unblock] button.

Appendices
Caution------------------------------------------------------------------------------------------
If you do not recognize the program, you should block it because it may be a virus. Click
the [Keep Blocking] button to prevent the program from connecting to the Internet.
If you clicked the [Keep Blocking] button:
Follow the steps below to check the Windows Firewall settings.
7
1 Click [Start] and then [Control Panel].
2 Double-click [Windows
Firewall].
• If [Windows Firewall] is not displayed,
click [Switch to Classic View] at the top
left of the window.

193
3 Click the [Exceptions] tab.
4 Check that the software is in
[Programs and Services].
5 Click the [Add Program] button
to add software that uses the
network.

If you clicked the [Ask Me Later] button:


Each time the program is activated, the [Windows Security Alert]
dialog box appears. Then you can select [Unblock].
Appendices

194
Specifications
General
Video Signal Format NTSC, PAL
Power Source Voltage Rechargeable Battery DB-60 (3.7 V) × 1
AAA Dry Alkaline Battery, Nickel-Hydrogen Battery, Oxyride Battery × 2
External (AC adapter): 3.8 V
External Dimensions 111.6 mm (W) × 58.0 mm (H) × 25.0 mm (D) (excluding projecting parts)
Weight Camera: Approximately 220 g (excluding battery, strap)
Accessories: Approximately 30 g (battery, strap)
Tripod Hole Shape 1/4-20UNC
Operating Temperature Range 0 °C to 40 °C
Operating Humidity Range 85% or less
Storage Temperature Range -20 °C to 60 °C

Camera Parts
Effective Pixels 10.01 million pixels
Image Pickup Element 1/1.75" primary-color CCD (Total 10.3 million pixels)
Lens
Lens 3.0× Optical Zoom
Aperture: F2.5 (Wide-angle) to 4.4 (Telephoto)
Focal Length 5.1 to 15.3 mm (equivalent to 24 to 72 mm on a 35mm camera)

Appendices
Shooting Distance Approximately 0.3 m to A (Wide-angle) or 0.3 m to A (Telephoto)
Macro Shooting Distance (from Approximately 0.01 m to A (Wide-angle), 0.04 m to A (Telephoto) or
the front edge of the lens) 0.01 m to A (Zoom macro mode)
Digital Zoom 4.0 times
Monitor Display Parts
Screen Size 2.5" 7
Type Transparent Amorphous Silicon TFT LCD
Pixel Count Approx. 230,000
White Balance AUTO/Fixed (OUTDOORS, CLOUDY, INCAND., FLUORES., MANUAL)
Exposure Adjustment
Light Metering Sensitivity Multi Light Metering (256 segments), Center-weighted Light Metering, Spot
Distribution Metering
Exposure Compensation Manual exposure compensation +/-2.0EV (1/3EV Steps)
Metering Method TTL-CCD Metering Method
Flash AE Yes (In Daylight Synchro: On)
Shutter Speed Still image: 180, 120, 60, 30, 15, 8, 4, 2, 1 to 1/2000 seconds;
The upper and lower limits differ for each scene mode and flash mode.
Movie: 1/30 to 1/2000 seconds
ISO Sensitivity AUTO, AUTO-HI, ISO 80/ISO 100/ISO 200/ISO 400/ISO 800/ISO 1600
(Standard Output Sensitivity)

195
Distance Control
AF Method Normal Shooting: External Passive/CCD method, Macro: CCD method
AF Measurement Range Normal: approx. 0.3 m to A,
Macro: approx. 0.01 m (W), 0.02 m (M), 0.04 m (T) to A
Internal Flash
Method Flashmatic and pre-flash method
Shooting Distance Approx. 0.2 to 5.0 m (Wide-angle), Approx. 0.15 to 3.0 m (Telephoto)
(ISO: AUTO)
Operating Modes Flash Off/Auto/Red-eye reduction/Forced Flash/Flash synchro/Soft Flash
Date Maintain Time Approx. 1 week
Image Data Record/Playback Part
Pixels
Still Image 3648 × 2736, 3648 × 2432, 2736 × 2736, 3264 × 2448, 2592 × 1944,
2048 × 1536, 1280 × 960, 640 × 480
Text 3648 × 2736, 2048 × 1536
Movie 640 × 480, 320 × 240
File Formats
Still Image JPEG (Exif Ver.2.21)
Text JPEG (Exif Ver.2.21)
Movie AVI (Open DML Motion JPEG Format Compliant)
Sound WAV (Exif Ver.2.21 µ law)
Appendices

Camera File System Standard DCF (“Design rule for Camera File system”, a JEITA standard)
Compression Format JPEG Baseline Format Compliant (Still image, movie)
Image Size
3648 × 2736 N: approx. 2073 KB/Screen, F: approx. 3608 KB/Screen,
RAW: approx. 14.4 KB/Screen
3648 × 2432 N: approx. 1846 KB/Screen, F: approx. 3210 KB/Screen,
7 RAW: approx. 12.8 KB/Screen
2736 × 2736 F: approx. 2713 KB/Screen
3264 × 2448 N: approx. 1665 KB/Screen
2592 × 1944 N: approx. 1060 KB/Screen
2048 × 1536 N: approx. 672 KB/Screen
1280 × 960 N: approx. 356 KB/Screen
640 × 480 N: approx. 83 KB/Screen

I/O Terminals
DC In 3.8 V (AC adapter)
Video Out 1.0 Vp-p (75:)
USB Terminal USB2.0 High-Speed (mini B cable)

Memory Cards for Recording and Playback


Memory Type SD memory card, SDHC memory card, Multi media card
196
Number of Images That Can be Stored in
Internal Memory/SD Memory Card
The following table shows the approximate number of images that
can be recorded in the internal memory and onto an SD memory
card at various image size and picture quality settings.
Picture Internal
Mode Image Size 64 MB 128 MB 256 MB 512 MB 1 GB 2 GB 4 GB
Quality Memory
Still RAW 3648 × 2736 1 3 6
13 26 51 105 206
Image F 3648 × 2736 6 15 31
63 127 244 495 973
N 3648 × 2736 11 27 55
109 221 425 865 1699
RAW 3648 × 2432 1 3 7
15 30 58 118 232
F 3648 × 2432 7 17 35
70 142 274 558 1097
N 3648 × 2432 13 30 61
122 247 476 960 1885
F 2736 × 2736 8 20 42
83 169 325 660 1297
N 3264 × 2448 14 33 68
136 275 530 1078 2117
N 2592 × 1944 22 53 107
213 430 828 1661 3261
N 2048 × 1536 35 83 169
338 682 1313 2671 5246
N 1280 × 960 62 147 300
599 1208 2323 4726 9282
N 640 × 480 276 644 1303
2598 5236 10071 20476 40206

Appendices
TEXT MODE 3648 × 2736 11 27 55
109 221 425 865 1699
2048 × 1536 35 83 169
338 682 1313 2671 5246
Movie 640 × 480 24 s 57 s 1 min
3 min 7 min 14 min 30 min 59 min
15FPS 56 s
51 s 46 s 57 s 24 s 42 s
640 × 480 12 s 28 s 58 s
1 min 3 min 7 min 15 min 30 min
30FPS 56 s 55 s 31 s 19 s 4s
320 × 240 1 min 2 min 5 min 11 min 24 min 46 min 94 min 184 min
15FPS 16 s 58 s 59 s 57 s 5s 19 s 11 s 57 s
7
320 × 240 39 s 1 min 3 min 6 min 12 min 23 min 48 min 94 min
30FPS 31 s 4 s 7s 19 s 42 s 13 s 40 s

Note ----------------------------------------------------------------------------------------------
• The number of remaining shots displayed on the LCD monitor may differ from the
actual number of shots, depending on the subject.
• Movie recording time and the maximum number of still pictures may vary depending
on the capacity of the recording destination (internal memory or SD memory card),
shooting conditions, and the type and manufacturer of the SD memory card.
• A high speed memory card is recommended when shooting for long periods.

197
Optional Accessories
The Caplio GX100 can be used with the items (sold separately)
listed below.
Item Model Remarks
AC Adapter AC-4c Used for power supply from a household outlet to the
camera.
Rechargeable Battery DB-60 Rechargeable battery for use with this camera.
Battery Charger BJ-6 Used to charge the rechargeable battery (DB-60).
LCD Viewfinder VF-1 An electrical viewfinder that attaches to the hot shoe
(case included). This offers viewfinder coverage of
100% and can be adjusted up to 90° without any
parallax, and enables easy low-angle shooting. The
LCD viewfinder (VF-1) is supplied with Caplio GX100
VF KIT.
Wide Conversion Lens DW-6 A wide conversion lens that enables wide-angle
shooting at a lens magnification of 0.79 times
(equivalent to a 19-mm wide-angle lens on a 35mm
camera). Use with the hood & adapter (case
included).
Hood & Adapter HA-2 Includes a hood to protect the lens from sunlight and
Appendices

an adapter for 43-mm general-use filters. These can


be used to enhance the shooting quality when the
subject is backlit.
Cable Switch CA-1 Used to release the camera shutter. You can perform
half-press and full-press operations.
Neck Strap GS-1 A double-loop neck strap.
7 Soft Case SC-45 Used to store your camera.
• Before using an optional accessory, see the documentation that came with
the product.
• You cannot use the internal flash when using the wide conversion lens or
hood.
• You cannot use the internal flash when the LCD viewfinder is tilted.
• This camera cannot be used with the ST-1 neck strap.

198
Using the AC Adapter (sold separately)
When shooting or viewing still images for a long time, or when
connecting to your computer, use of the AC adapter (sold
separately) is recommended.
If you have already used this camera, make sure it is turned off
before loading the AC adapter coupler.
1 Slide the release lever toward
OPEN to open the battery/card 1
cover.

2
2 Insert the AC adapter coupler.
• When the AC adapter coupler is
loaded in place, it is locked with the
hook shown in the figure.
3 Open the power (DC input)
cable cover and place the

Appendices
cable outside.
4 Close the battery/card cover
and slide the release lever in
the opposite direction of
OPEN to lock it in place. 7
5 Plug the power cord into an
outlet.

Caution------------------------------------------------------------------------------------------
• When closing the battery/card cover, slide the release lever and be sure to lock it in
place.
• Be sure to attach the AC cable and plug the power cord into the outlet firmly.
• When you are not using the camera, unplug the AC adapter from the camera and the
power outlet.
• If you disconnect the AC adapter from the camera or the plug from the outlet while the
camera is in use, data may be lost.
• When using the AC adapter, the battery level indication may not reach the full area.

199
Disconnecting the AC Adapter
Make sure the camera is turned off before disconnecting the AC
adapter.
1 Unplug the power plug from the outlet.
2 Slide the release lever toward OPEN to open the
battery/card cover.
3 Remove the AC adapter coupler from the camera.
4 Close the battery/card cover and slide the release lever
in the opposite direction of OPEN to lock it in place.
Appendices

200
Using the External Flash
The camera has a hot shoe, allowing you X contact
to attach an external flash (available in
stores).
When using an external flash, follow the
steps below.
1 Close the flash cover. (P.17)
2 With the camera and external
flash powered off, attach the external flash to the hot
shoe.
3 Turn on the camera, turn the mode dial to A or M, and
set the aperture value. (P.71, P.72)
4 Set the ISO sensitivity to a value other than [AUTO].
5 Turn on the external flash, turn its mode to “Auto”, and
set the F-value and ISO sensitivity to the camera-set

Appendices
values.
• Be sure to turn off the external flash before detaching the external
flash from the camera.

Caution------------------------------------------------------------------------------------------
Camera shake may occur when using slower shutter speeds. 7

201
Caution------------------------------------------------------------------------------------------
• You cannot use the internal flash when an external flash is attached as this can cause
injury or damage.
• Irrespective of flash setting, a flash ON signal is output to the X contact of the hot shoe.
To stop an external flash, use a switch on the flash.
• Exposure may not be appropriate even when the F-value and ISO sensitivity of the
external flash are the same as those of the camera. If so, change the f-number and
ISO sensitivity of the flash.
• As the flash ON signal, the camera outputs a positive pulse to the X contact.
• A flash on the market rarely have an X contact of the opposite polarity. This kind of
flash may not only not work but also cause a problem to the camera. For the terminal
specifications, contact the manufacturer of the external flash.
• Use an external flash of a lighting angle covering the angle of view of the shooting
lens.
• Use an external flash basically at a distance where the internal flash is not adequate
(long distance). Shooting at a short distance may end in over-exposure.
• Do not use an external flash having a special signal pin. Using such a flash may cause
inappropriate exposure or damage of the camera circuit.
• You cannot use an LCD viewfinder when an external flash is attached.
Appendices

202
Functions Whose Defaults are
Restored When Camera is Turned Off
Turning the camera off may reset some function settings to their
defaults.
The table below indicates whether or not the function is reset to its
default when the camera is turned off.
O : setting is saved × : setting is restored
Type Function Default Settings
Shooting options PIC QUALITY/SIZE O N3648(10M)
FOCUS O MULTI AF
AE METERING O MULTI
CONT. MODE × OFF
IMG SET O NORMAL
AUTO BRACKET × OFF
INTERVAL × 0s
IMAGE WITH SOUND × OFF
DATE IMPRINT O OFF
EXPOSURE COMP. O 0.0

Appendices
WHITE BALANCE O AUTO
ISO SETTING O AUTO
CAMERA SHAKE COR O ON
Macro shooting O MACRO OFF
Flash O FLASH OFF
Self-timer × SELF-TIMER OFF 7
Maximum brightness O -
DENSITY (TEXT MODE) O NORMAL
SIZE (TEXT MODE) O 2048(3M)
MOVIE SIZE (movie mode) O 320
FRAME RATE O 30FPS
Playback options Volume setting for movies and still
O -
pictures with sound

203
O : setting is saved × : setting is restored
Type Function Default Settings
Items to set from LCD BRIGHTNESS O -
the setup menu REG. MY SETTINGS O SETTING1
STEP ZOOM O OFF
ISO AUTO-HIGH SET O AUTO 400
AUTO POWER OFF O 1 MIN.
BEEP SOUND O ALL
VOL. SETTINGS O J J F (Medium)

LCD CONFIRM. O 0.5 SEC.


ADJ LEVER. SET.1 O EXPO.CMP
ADJ LEVER. SET.2 O WHT.BAL.
ADJ LEVER. SET.3 O ISO
ADJ LEVER. SET.4 O OFF
ADJ SHTR BTN SET O OFF
FNCTN. BTN. SET. O AF/MF
AF AUX. LIGHT O ON
RAW/JPEG SETTING O FINE
DIGITAL ZOOM IMG O NORMAL
SHTG STGS WARNG. O ON
Appendices

ENLGE PHOTO ICON O OFF


USB CONNECTION O MASS STR
SEQUENTIAL NO. O ON
DATE SETTINGS O -
LANGUAGE/N O *
VIDEO OUT MODE O *
7
* The default setting varies depending on where you purchased the camera.

204
About Scene Mode
Depending on the scene mode, the operation of functions may differ
from when in normal shooting mode. Refer to the table below.
Scene Mode Flash Macro Shooting
PORTRAIT Initial setting: FLASH OFF Disabled
SPORTS Initial setting: FLASH OFF Disabled
LANDSCAPE Fixed to [FLASH OFF] Disabled
NIGHTSCAPE [FLASH ON] is disabled Disabled
Initial setting: AUTO
SKEW COR MODE Initial setting: FLASH OFF Enabled
TEXT MODE Initial setting: FLASH OFF Enabled
ZOOM MACRO Initial setting: FLASH OFF Macro shooting only
HIGH SENS Initial setting: FLASH OFF Enabled

Appendices
7

205
Shooting Setting Menu Items by Scene Mode

SKEW COR MODE

ZOOM MACRO
NIGHTSCAPE
LANDSCAPE

TEXT MODE

HIGH SENS
Setting Refer to

PORTRAIT

SPORTS
PIC QUALITY/SIZE O O O O O - O O P.80
DENSITY - - - - - O - - P.65
SIZE - - - - - O - - P.80
FOCUS O O - O O - O O P.83
AE METERING - - - - O - O - P.86
CONT. MODE - - - - - - O - P.87
IMG SET - - - - O - O - P.91
AUTO BRACKET - - - - - - O - P.93
IMAGE WITH SOUND O O O O O O O O P.98
DATE IMPRINT O O O O O O O O P.99
EXPOSURE COMP. O O O O O - O O P.100
WHITE BALANCE O O O O O - O O P.101
Appendices

ISO SETTING - - - - O - O - P.104


CAMERA SHAKE COR O O O O O O O O P.106

O Available, - Not available


For details about options, see P.77.

206
Using Your Camera Abroad

AC Adapter (Model AC-4c)


This AC adapter can be used in regions with a current of 100-240V, 50Hz/60Hz.
If you are going to travel to a country that uses a different shaped wall outlet/plug, please consult your travel
agent on a plug adapter suitable for wall outlets in your country of destination.

Warranty
This product was manufactured for use in the country in which it was purchased. The warranty is only valid
in the country in which the camera was purchased.
Should the product fail or malfunction while you are abroad, the manufacturer assumes no responsibility for
servicing the product locally or bearing the expenditure incurred therefore.

Playback on Television in Other Regions


Playback is possible on televisions (or monitors) equipped with a video input terminal. Please use the AV
cable provided.
This camera is compatible with both NTSC and PAL television formats. Set the video format on the camera
to match that of the television you are using.
When you go abroad, set your camera to the local video format.

Appendices
7

207
Cautions on Use
Cautions on Use
• This product was manufactured for use in the country in which it was
purchased. The warranty is only valid in the country in which the camera
was purchased.
• Should the product fail or malfunction while you are abroad, the
manufacturer assumes no responsibility for servicing the product locally or
bearing the expenditure incurred therefore.
• Be sure not to drop or apply any sudden force to the camera.
• Firing the flash consecutively may heat the firing unit. Do not fire it
consecutively more than necessary.
• Do not touch the flash and keep foreign objects away from the firing unit.
Doing so can cause burns and fires.
• Do not fire the flash near eyes. It could cause visual impairment (particularly
for infants).
• Do not fire the flash near the driver of a vehicle to avoid causing accidents.
• The batteries may become hot after extended use. Touching the batteries
immediately after use could result in burns to your fingers.
• If the LCD monitor or panel is exposed to sunlight, they may become
Appendices

washed out and images may become hard to view.


• The LCD monitor and panel may contain some pixels that do not remain lit
up continually in part or at all. Also, the brightness may become uneven
because of the characteristics of LCDs. These are not failures.
• Do not forcefully press the surface of the LCD monitor.
• While you are carrying the camera, be careful not to hit it against other
7 objects.
• In an environment where the temperature changes suddenly, condensation
may occur in the camera, resulting in troubles such as fogging of the glass
surface or malfunctions of the camera. If this occurs, place the camera in a
bag to slow the temperature change as much as possible. Take it out of the
bag after the temperature difference from the atmosphere has decreased to
a fairly small amount.
• To avoid damaging the connectors, do not put any objects into the camera’s
microphone or speaker holes.

Conditions in which condensation may easily occur:--------------------------


• When the camera is moved to an environment where the temperature differs greatly.
• In humid places.
• In a room immediately after being heated, or when the camera is exposed directly to
cooled air from an air-conditioner or another similar appliance.

208
Care and Storage
Care
• Please note that if fingerprints, dirt, etc. get onto the lens, picture quality will
suffer.
• When dust or dirt does get on the lens, do not touch it directly with your
fingers, and either use a blower (available in stores) to blow it off, or a soft
cloth to gently dust it off.
• After use at the beach or around chemicals, wipe it off particularly carefully.
• In the unlikely event that your camera fails to work properly, please consult
your Ricoh Repair Center.
• There are high voltage circuits in this camera. As this is dangerous, do not
dismantle this camera under any circumstances.
• Do not get volatile substances, such as thinner, benzene, or pesticides on
your camera. This may cause a change in quality, paint to peel, etc.
• As the surface of the LCD monitor is easily scratched, do not rub hard
objects against it.
• Clean the surface of the LCD monitor by wiping gently with a soft cloth
containing a small amount of display cleaner sold in stores.
Use and Storage
• Please avoid using or storing your camera in the following kinds of places,

Appendices
as this may damage the camera.
In high heat and humidity, or where there is severe change in
temperature or humidity.
Places with a lot of dust, dirt or sand.
Places with severe vibration.
Places where it is in direct contact with vinyl or rubber products or
chemicals, including mothballs or other insect repellent, for long periods 7
of time.
Places with strong magnetic fields (near a monitor, transformer, magnet,
etc.).
• Remove the batteries if you are not going to use the camera for a long
period of time.
Precautions regarding care of your camera
1. Be sure to turn the power off.
2. Remove the batteries or AC adapter before caring for your camera.

209
Warranty and Servicing
1. This product is backed by a limited warranty. During the warranty period mentioned in
the Warranty supplied with your camera, any defective parts will be repaired free of
charge. In the event of a camera malfunction, contact the dealer from which you
purchased the camera or your nearest Ricoh Repair Center. Please note that you will
be not be reimbursed for the cost of bringing the camera to the Ricoh Repair Center.
2. This warranty does not cover any damage resulting from:
1 failure to follow the instructions in the instruction manual;
2 repair, modification or overhaul not conducted by an authorized service center
listed in the instruction manual;
3 fire, natural disaster, act of God, lightning, abnormal voltage, etc.;
4 improper storage (noted in the “Camera User Guide”), leaking of battery and other
fluids, mold, or otherwise insufficient care of the camera.
5 submergence in water (flooding), exposure to alcohol or other beverages, infiltration
of sand or mud, physical shock, dropping of the camera, or pressure on the camera,
and other unnatural causes.
3. After the warranty period has passed, you will be liable for all repair fees, including
those incurred at an authorized service center.
4. You will be liable for all repair fees, even within the warranty period, if the warranty card
is not attached or if the distributor’s name or the purchase date have been changed or
are not indicated on the card.
5. Expenses for overhaul and thorough inspection by special request of the customer will
be charged to the customer, whether or not they are incurred during the warranty period.
6. This warranty only applies to the camera and not to the accessories, such as the case
and strap, nor does it apply to the battery and other consumables provided.
7. Any consequential damages arising from failure of the camera, such as expenses
Appendices

incurred in taking pictures or loss of expected profit, will not be reimbursed whether
they occur during the warranty period or not.
8. The warranty is only valid in the country in which the camera was purchased.
* The above provisions refer to repairs offered free of charge, and do not limit your
legal rights.
* The intention of the above provisions is also described in the warranty card
provided with this camera.
9. Parts essential to the servicing of the camera (that is, components required to maintain
7 the functions and quality of the camera) will be available for a period of five years after
the camera is discontinued.
10. Please note that if the camera is seriously damaged by flooding, submergence,
infiltration of sand or mud, violent shocks or dropping, it may not be repairable, and
restoration to its original condition may be impossible.

Note ----------------------------------------------------------------------------------------------
• Before sending the camera in for repair, check the battery and read the instruction
manual again to ensure proper operation.
• Some repairs require a significant amount of time to be completed.
• When sending the camera to a service center, please include a note which describes
the defective part and the problem as precisely as possible.
• Remove all accessories not related to the problem before sending the camera to the
service center.
• Before taking any important pictures (such as at weddings, on trips abroad, etc.), test
the camera to check operation and ensure proper functioning. We recommend that
you keep this manual and spare battery on hand.
• This warranty does not apply to data stored on an SD memory card or in internal memory.

210
INFORMATION TO THE USER
USA FCC Part15 Class B
The equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, then
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help. (FCC 15.105B)
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. (FCC 15.21)
Properly shielded and grounded cables and connectors must be used for connection to a
host computer in order to comply with FCC emission limits. (FCC 15.27)
An AC adapter with a ferrite core must be used for RF interference suppression.
COMPLIANCE INFORMATION STATEMENT
Product Name: DIGITAL CAMERA
Model Number: Caplio GX100

Appendices
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.

RICOH CORPORATION
5 Dedrick Place, West Caldwell NJ, 07006 Tel.: 1-800-225-1899 7
Note to Users in Canada
Note: This Class B digital apparatus complies with Canadian ICES-003

Remarque Concernant les Utilisateurs au


Canada
Avertissement: Cet appareil numerique de la classe Best conforme a la norme NMB-003
du Canada
IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS
DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY
FOLLOW THESE INSTRUCTIONS.

211
Card reader................................180
Index CONT...........................................87
COPY TO CARD........................123

A D
DATE IMPRINT............................99
AC adapter .......................... 14, 199
DATE SETTINGS ................35, 161
Acrobat Reader ......................... 175
Delete...........................................56
ADJ LEVER SET.1, 2 ................ 148
Delete/Self-timer button ...18, 50, 56
ADJ SHTR BTN SET................. 149
DeskTopBinder Lite ...........167, 173
ADJ. lever................ 18, 20, 64, 112
Digital zoom .................................42
ADJ. mode................................... 64
DIGITAL ZOOM IMG .................153
AE LOCK ..................................... 70
Direct print..................................128
AE METERING............................ 86
DISP. button...........................18, 59
AF AUX. LIGHT ......................... 151
DPOF .........................................118
AF auxiliary light .................... 17, 50
AF target shift .............................. 66 E
AF window ................................... 17 Enlarged view ..............................55
Alkaline batteries ................... 25, 31 Enlarged view/Thumbnail display
Aperture priority mode (A) ..... 19, 71 button............................18, 42, 53
AUTO BRACKET ........................ 93 ENLGE PHOTO ICON ...............156
Auto focus (AF) ........................... 83 Error messages..........................186
Auto focus/Flash lamp EXPOSURE COMP. ..................100
..................................... 18, 39, 45 External flash .......................16, 201
Auto focus/Manual focus
(AF/MF) .................................... 69 F
AUTO POWER OFF............ 33, 144 Flash ......................................17, 44
AUTO RSZ (Auto resize)........... 153 Flash button ...........................18, 44
Auto shooting mode .............. 19, 38 Flash OPEN switch ................17, 44
AV cable .............................. 12, 126 Fn (Function) button.......17, 67, 150
AV output terminal ............... 18, 126 FNCTN. BTN. SET.....................150
AVI file ....................................... 109 FOCUS ........................................83
B Focus lock....................................39
FORMAT [CARD].......................137
Backlighting ............................... 100 FORMAT [INT. MEM.]................138
Battery ......................................... 25 FRAME RATE............................110
Battery charger ...................... 12, 29 Full-press .....................................38
Battery level indication ................ 24
Battery/Card cover ........ 18, 30, 199 G
BEEP SOUND ........................... 145 Grid guide ....................................59
C Grid view ......................................53

Cable switch .................. 14, 16, 198 H


Camera shake ..................... 37, 106 Half-press.....................................39
CAMERA SHAKE COR ............. 106 Handstrap ....................................12
Caplio Software CD-ROM ... 13, 165 HIGH SENS .................................47
212
Histogram .................................... 61 O
Hood & adapter ................... 14, 198
ORIGINAL..................................157
Hot shoe .............................. 17, 201
Oxyride batteries..........................25
I P
IMAGE WITH SOUND................. 98
PIC QUALITY/SIZE......................80
IMG SET...................................... 91
PictBridge...................................128
Internal memory .................... 27, 52
Playback button .....................18, 52
INTERVAL................................... 96
Playback mode ......................32, 52
Irodio Photo & Video Studio
Playback setting menu...............113
............................... 166, 168, 177
PORTRAIT...................................46
ISO AUTO-HIGH ....................... 143
POWER button ............................17
ISO SETTING............................ 104
Printing.......................................128
L Program shift mode (P)..........19, 74
LANDSCAPE............................... 46 PROTECT..................................115
LANGUAGE/N................ 34, 162 Q
LCD BRIGHTNESS ................... 139
Quick review button ...............18, 51
LCD CONFIRM. ........................ 147
LCD monitor .......................... 18, 22 R
LCD viewfinder .................... 14, 198 RAW format file............................80
Lens............................................. 17 RAW/JPEG SETTING................152
Lens cap................................ 12, 32 Rechargeable battery
M ................................12, 25, 29, 30
Recharging...................................29
M (Memory-reversal)-CONT........ 87
REG. MY SETTINGS.................140
Macro button ......................... 18, 43 Release lever .................18, 30, 199
Manual exposure mode (M) .. 19, 72 RESIZE ......................................121
Manual focus (MF) ...................... 84 RESTORE DEFAULTS..............108
Mass storage mode (MASS STR) RICOH Gate La..................166, 181
....................................... 157, 179
MENU/OK button... 18, 79, 113, 135 S
Microphone.................................. 17 S (Stream)-CONT ........................87
MODE button......................... 18, 47 Scene mode (SCENE) ...........19, 46
Mode dial ............................... 17, 19 SD memory card ..............27, 30, 52
Movie mode ......................... 19, 109 Self-timer......................................50
MOVIE SIZE ................................ 80 SEQUENTIAL NO......................159
My settings mode (MY1, MY2) SETUP menu .............................134
........................................... 19, 76 Shooting setting menu .................77
N SHTG STGS WARNG. ..............155
Shutter release button............17, 36
Nickel-Hydrogen batteries ........... 25 SKEW COR MODE................46, 48
NIGHTSCAPE ............................. 46 SKEW CORRECTION ...............124
Number of images that can be SLIDE SHOW ............................114
stored ..................................... 197 Speaker........................................18
Number of shots you can take..... 26
SPORTS ......................................46
213
STEP ZOOM ............................. 142
Still image mode.............. 22, 23, 46
T
Telephoto/Wide-angle button
..................................... 18, 42, 54
Terminal cover............. 18, 126, 129
Text density ................................. 65
TEXT MODE ............................... 46
Three-frame view ........................ 53
Tripod screw hole ........................ 18
U
Up-down dial ......................... 17, 20
USB cable ........................... 12, 128
USB CONNECTION .................. 157
USB driver ......................... 166, 167
USB terminal ............... 18, 129, 178
V
VIDEO OUT MODE ................... 163
VOL. SETTINGS ....................... 146
W
WHITE BALANCE ..................... 101
White balance bracket (WB-BKT)
................................................. 94
White saturation highlights
display ...................................... 60
WIA driver.......................... 166, 167
Wide conversion lens .......... 14, 198
Z
Zoom ........................................... 42
ZOOM MACRO ..................... 47, 49

214
Telephone Support Numbers in Europe

UK (from within the UK) 02073 656 580


(from outside of the UK) +44 2073 656 580

Deutschland (innerhalb Deutschlands) 06331 268 438


(außerhalb Deutschlands) +49 6331 268 438

France (à partir de la France) 0800 91 4897


(en dehors de la France) +49 6331 268 409

Italia (dall’Italia) 02 696 33 451


(dall’estero) +39 02 696 33 451

España (desde España) 91 406 9148


(desde fuera de España) +34 91 406 9148

http://www.service.ricohpmmc.com/
From environmental friendliness to environmental
conservation and to environmental management
Ricoh is aggressively promoting environment-
friendly activities and also environment conservation
activities to solve the great subject of management
as one of the citizens on our precious earth.
To reduce the environmental loads of digital cameras,
Ricoh is also trying to solve the great subjects of “Saving
energy by reducing power consumption” and “Reducing environment-affecting chemical substances contained in products”.
If a problem arises
First of all, see “Troubleshooting” (GP.186) in this manual. If the issues still persist, please contact a Ricoh office.
Ricoh Offices
RICOH COMPANY, LTD. 3-2-3, Shin-Yokohama Kouhoku-ku, Yokohama City, Kanagawa 222-8530, Japan
http://www.ricoh.co.jp/r_dc
RICOH AMERICAS CORPORATION 5 Dedrick Place, West Caldwell, New Jersey 07006, U.S.A.
1-800-22RICOH
http://www.ricoh-usa.com
RICOH INTERNATIONAL B.V. (EPMMC) Oberrather Str. 6, 40472 Düsseldorf, GERMANY
(innerhalb Deutschlands) 06331 268 438
(außerhalb Deutschlands) +49 6331 268 438
http://www.ricohpmmc.com
RICOH UK LTD. (PMMC UK) (from within the UK) 02073 656 580
(from outside of the UK) +44 2073 656 580
RICOH FRANCE S.A.S. (PMMC FRANCE) (à partir de la France) 0800 91 4897
(en dehors de la France) +49 6331 268 409
RICOH ESPANA, S.A. (PMMC SPAIN) (desde España) 91 406 9148
(desde fuera de España) +34 91 406 9148
RICOH ITALIA S.p.A. (PMMC ITALY) (dall’Italia) 02 696 33 451
(dall’estero) +39 02 696 33 451
RICOH HONG KONG LIMITED 12/F, One Kowloon, 1 Wang Yuen Street, Kowloon Bay, Hong Kong
RICOH AUSTRALIA PTY. LTD. 8 Rodborough Road, Frenchs Forest, NSW 2086, Australia
http://www.ricoh.com.au
About Irodio Photo & Video Studio
North America (U.S.) (Toll Free) +1-800-458-4029
Europe UK, Germany, France and Spain: (Toll Free) +800-1532-4865
Other Countries: +44-1489-564-764
Asia +63-2-438-0090
China +86-21-5450-0391
Business hours: 9:00 AM to 5:00 PM

Ricoh Company, Ltd.


Ricoh Building, 8-13-1, Ginza, Chuo-ku, Tokyo

*L739 2971C*
104-8222, Japan
2007 June

EN USA GB GB AE AE
Printed in China

Das könnte Ihnen auch gefallen