Beruflich Dokumente
Kultur Dokumente
STAFF
Forms according to Owner's requirement. C1 C2
What Ship No. was diverted?
1
-->
All the items mentioning in G/A for working plan mention it.
-->Tank boundary line, Tank name Bilge well, Suction well, Hold ladd.,
2 Rudder trunk, Mooring equipment and size, Draft in front view,
Turning diameter of deck crane and Other dimensions
Strength and Hold γ of each part (To be written IACS UR21, only sea load on
3 hatch cover)
-->
Hold & Tank Capacity Table (Hull & Mach)
4
-->
Confirmed the style of particulars if for Finished Plan Style
Principal particulars, date of Keel laid, Launched, Delivered.
-->
Confirmed the Hold capacity output if Grain Loading type not Bale of No. of Cars
5
Confirmed the list of COMPLEMENT in P.P. if same from room name
arrangement in acc.
D/W values in case of Multi FBD.
--> ______________________________
Confirmed freeboard (To be solid line at delivery, others dashed line in case of
6
Multi-freeboard)
7 Confirmed that should not included the D/W table and manhole basically.
Confirmed if D/W of D/W scale calculated using the final D/W.
(It should attach input data sheet in IPCA with this check list)
8
Adjust unit length of D/W scale.(5mm or 1cm) Delete row of displacement and
-->not yet calculated
Compute the correct air draft.
9
-->_________ meters from B.L.
Added items to fitted by owner's request / rule requirements.
10
-->Helicopter Landing Mark
To be include in the drawings following items:
Deck : Bulk Carrier
-->Ship name, Marks on shell, Fittings of hold access, Rail of side rolling, Pump
of mooring machineries, Stage for windlass, Rack for side rolling when cover
opened.
Deck : Tanker.
-->Not Applicable
Deck : PCC
11
-->Not Applicable
Accommodation :
Ship name board, Windows(front, side), Funnel mark(front, side) Clear view
screen, Ladder for boat davit, Name of each cabins & stores(No., Shelves &
linings in Bos'n Store & Steer. Gear RM.), Folding antenna
E/R :
Boiler, Exhaust gas economizer, Generator engine, Small tanks (to be deleted
name which no mentioned in tank capacity table)
To be written W.B. IN PORT USE to profile & bottom plan.
12 To be written height, capacity W.B. in port use to under CAPACITY PLAN.
-->
Items to be deleted:
Center line & points of machinery & out fittings (esp. chair, toil.)
Curtain of windows and bath except for accordion curtains.
Storm rails, door closer, shoes mats.
13
No. & name of wall vent., goose neck vent., mechanical vent.
Stages between decks in E/R (ladders between decks to be written)
Cross line of control room, store and work shop in E/R.
Deck side line in deep tank.
Comment Detail
LEGEND:
C1: DRAWER: -- OK
X -- With comment
O -- Comment rectified
P -- Pending
C2: CHECKER:
C3: APPROVER: