Beruflich Dokumente
Kultur Dokumente
Quick Connection
of Hydraulic Lines
Thread sealer
To seal nptf threads use one
of the new anaerobic thread
sealers or Teflon paste.
WARNING!
Couplers should be
pressurized only when
⅜" High Flow Couplers completely connected and
should not be coupled or uncoupled
• Standard equipment on most Enerpac cylinders
when pressurized.
• Recommended for use on all Enerpac pumps and cylinders
where space and porting permits More safety instructions in our
• Includes “2-in-1” dust cap for use on male and female couplers ‘Yellow Pages’.
122
Hydraulic Couplers
CT-604 Safety Tool
Use the Enerpac Minimize injuries from projectile
A, C,
CT-604 to relieve
hydraulic back pressure
parts and under-skin hydraulic fluid
injections by eliminating unsafe
F, T
by safely bleeding the coupler bleeding practices. Series
hydraulic coupler.
NOTE: For use on C-Series 700 bar The CT-604 is Enerpac-engineering
High-Flow Couplers only safe for use at 700 bar.
* Value A is total length when male and female half are connected.
www.enerpac.com 123