Beruflich Dokumente
Kultur Dokumente
MEMBER
Regards,
Joe Coates
President
196 LOWER CHERRY MACON, GEORGIA 31201 (800) 752-1905 FAX (800) 203-4925 www.coolingtowersystems.com
Table of Contents
Introduction Letter..................................................................................... 1
Table of Contents...................................................................................... 2
Terms and Conditions............................................................................... 3
Cooling Tower Specifications.................................................................. 4 - 5
Cooling Tower List Price.......................................................................... 6
Stainless Steel Optional Add-On List Price............................................ 7- 8
Low Noise Cooling Tower List Price....................................................... 9
Cooling Tower Replacement Parts List Price......................................... 10-13
Fan Motor List Price.................................................................................. 14
V Belt Speed Reducer Parts List Price.................................................... 15
V Belt & Gear Reducer List Price............................................................ 16
Anti Splash Louver List Price................................................................... 17
Extension Skirt List Price......................................................................... 18
Vertical Remote Sump Tank List Price.................................................... 19
Vertical Storage Tank Specs.................................................................... 20
Winterization Basin Heaters & Heater Control Panel............................. 21
Heater and Control Panel Specifications................................................ 22-23
Vibration Isolation Mounts List Price...................................................... 24
Man Hours Assembly Table...................................................................... 25
Assembly Drawings & Parts Tables for Cooling Towers T-25 through T-3000
T-25 through T-230................................................................................. 26-27
T-240 through T-260............................................................................... 28-29
T-270 through T-2125............................................................................. 30-31
T-2150 through T-2350........................................................................... 32-35
T-2400 through T-3000........................................................................... 36-37
CTS Sample Warranty………………………………………………………. 38
Notes…………………….…………………………………………………….. 39
Sales: Cooling Tower Systems sells its goods on the expressed condition that the buyer
agrees to the terms and conditions stated hereon. The buyer relinquishes any inconsistent or
additional terms included in any purchase order. The buyer's acceptance and receipt of the
goods shall compose any agreement to such terms and conditions.
Acceptance: All orders are subject to Cooling Tower Systems and Sales department approval
and acceptance. Cooling Tower Systems reserves the right to end further delivery upon the
buyer's failure to pay any portion of any order, when it becomes due. If the buyer's financial
condition becomes unsatisfactory, Cooling Tower Systems may require cash payments or
satisfactory security for future deliveries or goods already delivered.
Cancellation: Buyer shall not cancel the order without prior written consent of Cooling Tower
Systems.
Deliveries: Cooling Tower Systems shall not be liable for delays in delivery due to causes
beyond its reasonable control including but not limited to strikes, fire, war, or acts of God,
whether such events occur at or about our warehousing facilities or at the warehousing
facilities of our suppliers. Cooling Tower Systems makes no guarantee of shipment by any
such date and shall have no liability or other debt for failure to ship on such date due to any
cause.
Shipping: The price of all products is F.O.B. Cooling Tower Systems warehousing facilities.
Title to goods passes to the buyer upon deliver by Cooling Tower Systems to the freight line.
Buyer assumes risk for all goods shipped. The buyer should examine shipments carefully for
loss or damages before accepting the shipment. The buyer should have loss and damage
noted by transportation agent on the freight bill when accepting delivery. Upon discovery of
concealed damage the buyer has fifteen (15) days from receipt of goods to call the freight line
for an inspection. In either case, the buyer cannot return equipment to Cooling Tower Systems
until completion of a freight inspection. In absence of shipping instructions, Cooling Tower
Systems shall use its own discretion in choice of carrier.
Return Policy: Cooling Tower Systems accepts only new and unused material returned for
credit. Cooling Tower Systems will charge a minimum of 20% for restocking all material
accepted for credit. Buyer must return all goods freight prepaid. Cooling Tower Systems will
not accept any goods returned after thirty days.
Cash Discount & Terms: Cooling Tower Systems may charge 1.5% each month on all sums
more than thirty (30) days past due. The first charge will be added on the sixty-first (61st) day
after the date of invoice. A 2% cash discount on parts and equipment will be issued if the
invoice is paid within ten (10) days after invoice.
Prices: All prices are subject to change without notice.
Furnish and install an induced-draft, counter flow, field erected, FRP and stainless steel
cooling tower of _____ cell(s) as shown on plans. Tower shall be similar and equal to Cooling
Tower Systems Model _________.
CAPACITY:
Tower shall be capable of cooling ___________ GPM for water from __________ F. to
__________ F. at a design engineering wet bulb temperature of ___________ F. and that the
thermal performance shall be guaranteed to perform per plans and specs. After installation if,
due to a suspected thermal performance deficiency, the owner chooses to conduct an on-site
thermal performance test under supervision of a qualified, disinterested third party, and
witnessed by the manufacturer, in accordance with the CTI or ASME standards during the first
year of operation, and if the tower fails to perform within the limits of test tolerances; then the
cooling tower manufacturer will pay for the cost of the test and will make such corrections as
are appropriate and agreeable to the owner to compensate for the performance deficiency.
CONSTRUCTION:
The cold water basin, casing section shall be constructed of fiberglass-reinforced polyester
(FRP). Fasteners and all other associated hardware shall be constructed of 304 Stainless
Steel, (SUS). All other standard metal components, such as supports, grilles, or tower
supports, are to be constructed of Hot Dipped Galvanized Steel, (H.D.G.S.), unless otherwise
specified by customer. (Can be 304 SUS or 316 SUS).
MECHANICAL EQUIPMENT:
Fan(s) shall be propeller type, incorporating heavy-duty cast aluminum blades. Blades shall
be individually adjustable and replaceable. Fan Assemblies shall be driven via standard V-Belt
Reducers or Gear Reducers, V-Belt Speed Reducers and Gear Reducers shall be completely
enclosed to protect the pulleys, drive-belts, and gears. Fan motors shall be Totally Enclosed,
(TEAC), reversible squirrel cage ball bearing type, and designed specifically for cooling tower
service.
WET DECK SURFACE:
The wet deck surface shall be formed from polyvinyl chloride (PVC) and shall be impervious
to rot, decay, and fungus or biological attacks and performance tested by the manufacturer to
insure responsibility and quality control of the final product.
T MODEL (A) (B) (C) (D) (E) (F) (G) (H) (I) (J) TOTAL
T-25 $37 $77 $114
T-28 $37 $77 $114
T-210 $37 $77 $114
T-215 $37 $77 $114
T-220 $51 $108 $46 $205
T-200 $51 $108 $77 $236
T-230 $62 $108 $108 $278
T-240 $123 $108 $216 $185 $108 $740
T-250 $123 $108 $240 $185 $108 $764
T-260 $143 $277 $246 $185 $108 $959
T-270 $200 $277 $448 $231 $108 $393 $185 $1842
T-280 $200 $277 $510 $231 $108 $393 $185 $1904
T-2100 $246 $308 $770 $231 $154 $393 $185 $2287
T-2125 $246 $308 $953 $231 $154 $470 $185 $2549
Accessory Items
T MODEL (A) (B) (C) (D) (E) (F) (G) (H) (I) (J) TOTAL
T-2150 $462 $1464 $1109 $262 $216 $470 $185 $1541 $5709
T-2175 $462 $1464 $1109 $262 $216 $470 $185 $1541 $5709
T-2200 $616 $1464 $1433 $308 $216 $624 $277 $1849 $6787
T-2225 $616 $1772 $1433 $308 $385 $624 $416 $1849 $7403
T-2250 $724 $1772 $1433 $308 $385 $624 $416 $1849 $7511
T-2300 $724 $1772 $2311 $385 $385 $955 $462 $2157 $770 $9921
T-2350 $724 $1772 $2465 $385 $385 $955 $462 $2311 $770 $10229
T-2400 $1695 $3389 $3004 $493 $462 $1232 $1386 $4776 $2465 $739 $19641
T-2500 $1695 $3389 $3235 $508 $462 $1633 $1464 $4930 $2619 $739 $20674
T-2600 $2464 $5392 $5546 $693 $539 $1633 $2157 $6470 $3235 $986 $29115
T-2700 $2464 $5392 $5546 $693 $539 $1633 $2157 $6470 $3235 $986 $29115
T-2800 $2773 $7394 $6316 $847 $616 $2342 $2311 $7086 $3697 $986 $34368
T-3000 $2773 $7394 $6316 $847 $616 $2342 $2311 $7086 $3697 $986 $34368
Accessory Item
• T-2100LN tower through T-3000LN tower motor comes standard with a V-Belt Speed Reducer
Accessory Item
* SET PRICE
* SET PRICE
Accessory Item
Accessory Item
Fan Motor
MODEL # REDUCER MODEL # SPEC. # QUANTITY LIST PRICE EACH LIST PRICE SET
T-2225 LBM-055C 2-11Ms-800 1 PC 111 279
T-2250 3-11Ms-800 1 PC 168
• The Manufacturer recommends when replacing V-Belts the complete set be replaced to eliminate
premature wearing. For optimal V-Belt usage, be sure that the match set numbers are within five (5)
match points.
T-220 3 57 12 346
T-225 3 57 12 346
T-230 4 49 12 415
T-240 4 54 13 470
T-250 4 61 13 558
T-260 4 61 15 558
T-270 6 45 18.25 646
T-280 6 45 18.25 646
T-2100 6 55 18.25 773
T-2125 6 63 18.25 882
T-2300 8 69 28 1588
T-2350 8 74 28 1710
T-2400 12 53 32 2257
T-2500 12 58 32 2431
T-2600 - T-2700 16 51 37 3131
T-2800 - T-3000 16 59 43 3908
Sprinkler Head
THE LIST PRICING ABOVE INCLUDES DRAIN FITTING ONLY. FOR 1" BULKHEAD FITTING - LIST PRICE
$40.00; 2" BULKHEAD FITTING - LIST PRICE $55.00; 3" BULKHEAD FITTING - LIST PRICE $105.00. FOR
FITTINGS OVER 4", CONTACT CTS FOR PRICING.
Accessory Item
CTS
Water Pump
Premium Heavy
Premium Weight Heavy Weight
Fill Weight Tank Weight Tank
Gallon Diameter Height Opening Drain -White- Availability -Blue- Availability
Capacity (IN.) (IN.) (IN.) (IN.) Item No. Location Item No. Location
65 23 38 8 1 1/4 60213 A - -
165 31 55 16 2 40281 A - -
300 35 78 16 2 40213 A - -
305 46 48 16 2 40302 A - -
500 48 71 16 2 40148 B, C, D, E - -
500 46 78 16 2 40304 F 40306 F
550 67 42 16 2 40023 A - -
750 46 112 16 2 40308 F - -
1000 64 79 16 2 40152 A 40154 F
1100 87 51 16 2 40070 A 40081 C, F
1300 87 58 16 2 40035 B, C 40036 B
1500 64 115 16 2 40144 A 40146 B
1550 87 65 16 2 40235 A 40236 -
1610 100 56 16 2 40199 C - -
1700 87 70 16 2 40010 A 40012 -
2100 87 87 16 2 40178 A 40241 -
2500 95 89 16 2 40051 A 40052 -
3000 95 105 16 3/2 40063 A 40065 -
4000 95 140 16 3/2 40076 B 40117 -
4000 102 125 16 3/2 40312 C, D, E, F 40314 -
5000 102 151 16 3/2 40164 A 40166 -
5800 141 97 16 3/2 40071 C - -
6000 102 182 16 3/2 40226 A 40233 -
6500 120 147 16 3/2 40224 A 40232 -
7000 141 117 16 3/2 40347 F 40349 -
9000 141 144 16 3/2 - - 40231 A
10,000 141 159 16 3/2 - - 40353 A
12,000 144 185 16 3/2 - - - A
TABLE 1: Single phase heater with built-in load carrying 0-100° F thermostats.
Single Phase Amperage
Tower Model No. Heater Catalog No. Watts 120V 208V 240V List Price*
T-25, T-28 712U221312 750 6.3 3.6 3.2 $576.14
T-210, T-215 712U241312 1500 12.5 7.2 6.3 580.10
T-220, T-230 712U251312 2000 16.7 9.6 8.4 580.10
T-240 712U441312 3000 25.0 14.5 12.5 619.62
T-250, T-260 713U191312 4000 N/A 19.2 16.7 684.19
T-270, T-280 713U581312 5000 N/A 24.0 20.8 711.86
T-2100 713U211312 6000 N/A 28.9 25.0 738.21
*Add $159.30 to all heaters for double pole thermostats. Prices above are for single pole, single throw only.
TABLE 2: Single phase heaters, no thermostats, for use with control panel option.
Single Phase Amperage
Tower Model No. Heater Catalog No. Watts 120V 208V 240V List Price*
T-25, T-28 712U121300 750 6.3 3.6 3.2 $289.88
T-210, T-215 712U141300 1500 12.5 7.2 6.3 293.84
T-220, T-230 712U151300 2000 16.7 9.6 8.4 293.84
T-240 712U341300 3000 25.0 14.5 12.5 333.36
T-250, T-260 713U271300 4000 N/A 19.2 16.7 351.81
" T713U111300 4000 N/A N/A 16.7 351.81
T-270, T-280 713U521300 5000 N/A 24.0 20.8 379.48
" T713U121300 5000 N/A N/A 20.8 379.48
T-2100 713U311300 6000 N/A 28.9 25.0 405.84
" T713U131300 6000 N/A N/A 25.0 405.84
TABLE 3: Three phase heaters, no thermostats, for use with control panel option.
Single Phase Amperage
Tower Model No. Heater Catalog No. Watts 120V 208V 240V List Price*
T-240 T713U141300 3000 8.3 7.2 3.6 376.85
T-250, T-260 T713U151300 4000 11.1 9.6 4.8 386.07
T-270, T-280 T713U171300 5000 13.9 12.0 6.0 400.56
T-2100 T713U201300 6000 16.7 14.5 7.2 412.42
T-2125 TO T-2175 T713U291300 9000 25.0 21.7 10.8 440.10
Heater Control Panel: Order catalog number 874U-100000. Panel is NEMA 4 with pre-mounted electrical hubs
for conduit connection, combination temperature and low water cutoff controller, probe and weatherproof
connector, contactor, and control power transformer. UL labeled and listed. Panel rating is 40 amps. List Price
$1,112.10
*OPTIONS: For larger towers, higher ratings, multiple circuits, disconnects, fusing, circuit breakers... Contact
Factory
Liquidproof/Explosion-Resistant
Outlet Boxes are furnished on all
heaters.
Vibration Isolator
We at Cooling Tower Systems have field engineers available for field assembly for any location in North America.
For further information on your special field assembly requirements and prices, call our convenient toll free
number and ask a sales representative for details.
Cooling Tower Systems has had numerous inquiries from our wholesale customers regarding the assembly time
required for field assembly of our cooling towers. The following table has been compiled to assist our customers
and should be used as a guide only.
Model Number Men required Hours per Man
T-25 to T-215 1 1
T-220 TO T-225 1 1.5
T-230 1 1.5
T-240 2 2
T-250 2 2
T-260 2 2
T-270 2 4
T-280 2 4
T-2100 to T-2125 3 5
T-2150 to T-2175 3 7
T-2200 to T-2250 4 8
T-2300 to T-2350 4 12
T-2400 to T-2500 5 18
T-2600 to T-2700 5 24
T-2800 to T-3000 5 40
NOTE:
(1) MODELS T-25 THROUGH T-280 SHIPPED ASSEMBLED AND ASSEMBLY PRICE IS INCLUDED IN
TOWER PRICE.
(2) MODELS T-2100 THROUGH T-2175 CAN BE FACTORY ASSEMBLY AND SHIPPED WITH OVERWIDTH
PERMITS. CALL SALES OFFICE FOR ASSEMBLY AND SHIPPING COSTS.
Accessory Item
Winterization Kit
QTY
REF. NUMBER DESCRIPTION T T T T T
25-28 210 215-220 225 230
02-02 Outlet Nozzle 1 1 1 1 1
02-03 Inlet Nozzle 1 1 1 1 1
02-04 Over Flow Nozzle 1 1 1 1 1
02-05 Drain Nozzle 1 1 1 1 1
02-06 Automatic Filler Nozzle 1 1 1 1 1
02-07 Quick Filler Nozzle 1 1 1 1 1
02-08 Float Valve Assembly 1 1 1 1 1
02-09 Over Flow 1 1 1 1 1
02-10 Suction Strainer 1 1 1 1 1
02-12A Z Type Connector 1 1 1 1 1
02-16 Elbow 1 1 1 1 1
02-19 Inlet Pipe 1 1 1 1 1
03-00 Water Basin 1 1 1 1 1
04-00 Casing Supporter 3 3 3 3 4
05-01A Casing 3 3 3 3 4
05-06 Hand Hole Cover 1 1 1 1 1
06-01 Stand Pipe 1 1 1 1 1
06-04 Stand Pipe Base 1 1 1 1 1
07-01 Stopper 1 1 1 1 1
08-01 Filling Supporter - A 3 3 3 3 4
11-00 Filling 2 2 2 2 2
12-01 Sprinkler Head 1 1 1 1 1
13-01 Sprinkler Pipe 4 4 4 4 4
13-02 End Cap - - - 4 4
13-03 Eliminator - - - - 4
13-04 Lock Nut 4 4 4 4 4
14-00 Motor Frame Assembly 1 1 1 1 1
16-01 Fan Motor 1 1 1 1 1
16-03 Fan Key 1 1 1 1 1
16-04 Fasten Nut 1 1 1 1 1
17-00 Fan Assembly 1 1 1 1 1
18-01 Fan Guard 1 1 1 1 1
20-02 Inlet Louver 3 3 3 3 4
20-10 Louver Bracket - 3 6 6 8
20-11 Knob Pin 6 6 6 6 8
OTHERS BOLTS & NUTS 1 SET
*Please check the above mentioned parts within two weeks after the goods are received.
QTY QTY
REF. REF.
DESCRIPTION T T T NUMBER DESCRIPTION T T T
NUMBER
240 250 260 240 250 260
02-01 Water Sump - - - 10-03 Ladder Bracket - A 2 2 2
02-02 Outlet Nozzle 1 1 1 10-04 Ladder Bracket - B 2 2 2
02-03 Inlet Nozzle 1 1 1 11-00 Filling 2 2 2
02-04 Over Flow Nozzle 1 1 1 12-01 Sprinkler Head 1 1 1
02-05 Drain Nozzle 1 1 1 12-04 Tension Wire 2 2 2
02-06 Automatic Filler Nozzle 1 1 1 13-01 Sprinkler Pipe 4 4 4
02-07 Quick Filler Nozzle 1 1 1 13-02 End Cap 4 4 4
02-08 Float Valve Assembly 1 1 1 13-03 Eliminator 4 4 4
02-09 Over Flow 1 1 1 13-04 Lock Nut 4 4 4
02-10 Suction Strainer 1 1 1 14-00 Motor Frame Assembly 1 1 1
02-12A Z Type Connector 1 1 1 16-01 Fan Motor 1 1 1
02-16 Elbow 1 1 1 16-03 Fan Key 1 1 1
02-19 Inlet Pipe 1 1 1 16-04 Fasten Nut 1 1 1
03-00 Water Basin 1 1 1 17-00 Fan Assembly 1 1 -
04-00 Casing Supporter 4 4 4 17-01 Fan Hub - - 1
05-01A Casing 4 4 4 17-02 Fan Blade - - 3
05-06 Hand Hole Cover 1 1 1 17-04 U-Bolt - - 6
06-01 Stand Pipe 1 1 1 18-01 Fan Guard 2 2 2
06-04 Stand Pipe Base 1 1 1 20-01-A Louver Supporters 8 8 8
07-01 Stopper 2 2 2 20-01-B Down Plug 8 8 8
08-01 Filling Supporter - A 4 4 4 20-01-C Up Plug 8 8 8
08-02 Filling Supporter - C 4 4 4 20-02 Inlet Louvers-Std. Type 8 8 8
10-00 Ladder 4 4 4 20-08 Wing Bolt 16 16 16
10-03 Ladder 1 1 1 20-09 Plastic Washers 16 16 16
OTHERS BOLTS & NUTS 1 SET
Water Basin Sealing Material
A Fiberglass 1 Set
B Polyester Resin 1 Keg
C Catalyst 1 Bottle
*Please check the above mentioned parts within two weeks after the goods are received.
QTY
QTY
REF.
DESCRIPTION REF. NUMBER DESCRIPTION
NUMBER T T T T T T
270-280 2100 2125 270-280 2100 2125
02-01 Water Sump 1 1 1 08-04 Fill Supt. Clamping Band 12 12 12
02-02 Outlet Nozzle 1 1 1 10-01 Ladder (A Section) 1 1 1
02-03 Inlet Nozzle 1 1 1 10-02 Ladder (B Section) 1 1 1
02-04 Over Flow Nozzle 1 1 1 10-03 Ladder Bracket - A 2 2 2
02-05 Drain Nozzle 1 1 1 10-04 Ladder Bracket - B 2 2 2
02-06 Automatic Filler Nozzle 1 1 1 11-02 Filling 1/2 Section 4 - -
02-07 Quick Filler Nozzle 1 1 1 11-03 Filling 1-3 Section - 6 6
02-08 Float Valve Assembly 1 1 1 12-01 to 12-04 Sprinkler Head Assemb. 1 1 1
02-09 Over Flow 1 1 1 13-01 to 03 Sprinkler Pipe Assemb. 4 4 4
02-10 Suction Strainer 1 1 1 14-00 Motor Frame Assemb. 1 1 1
02-12A Z Type Connector 1 1 1 16-01 Fan Motor 1 1 1
02-16 Elbow 1 1 1 16-03 Fan Key 1 1 1
02-19 Inlet Pipe 1 1 1 16-04 Fasten Nut 1 1 1
03-01 Water Basin 5 5 5 17-01 Fan Hub 1 1 1
04-00 Casing Supporter 6 6 6 17-02 Fan Blade 4 4 4
05-01A Casing 4 6 6 17-04 U-Bolt 6 8 8
05-06 Hand Hole Cover 1 1 1 18-01 Fan Guard 2 2 2
06-01 Stand Pipe 1 1 1 20-01-A Louver Supporters 8 12 12
06-04 Stand Pipe Base 1 1 1 20-01-B Down Plug 8 12 12
07-01 Stopper 2 2 - 20-01-C Up Plug 8 12 12
07-02 Column - - 2 20-02 Inlet Louvers-Std. 8 12 12
08-01 Filling Supporter - A 6 6 6 20-08 Wing Bolts 16 24 24
08-02 Filling Supporter - B 6 6 6 20-09 Plastic Washers 16 24 24
08-03 Filling Supporter - C 6 12 12 Others Bolts & Nuts 1 Set
Water Basin Sealing Material
A Fiberglass 1 Set
B Polyester Resin 1 Keg
C Catalyst 1 Bottle
*Please check the above mentioned parts within two weeks after the goods are received.
QTY QTY
REF. REF.
DESCRIPTION T T T T T DESCRIPTION T T T T T
NUMBER NUMBER
2150 2200 2225 2300 2350 2150 2200 2225 2300 2350
2175 2250 2175 2250
01-02 Ring Frame - 8 8 8 8 11-04 Filling (1/4 Section) 8 8 8 - -
01-05 Truss Pipe Assembly - 4 4 4 4 11-06 Filling (1/6 Section) - - - 12 12
02-01 Water Sump 1 1 1 1 1 12-01 Sprinkler Head 1 1 1 1 1
02-02 Outlet Nozzle 1 1 1 1 1 12-02 Center Post 1 1 1 1 1
02-03 Inlet Nozzle 1 1 1 1 1 12-03 Turnbuckle 4 4 4 6 6
02-04 Over Flow Nozzle 1 1 1 1 1 12-04 Tension Wire 4 4 4 6 6
02-05 Drain Nozzle 1 1 1 1 1 13-01 Sprinkler Pipe 4 4 4 6 6
02-06 Automatic Filler Nozzle 1 1 1 1 1 13-02 End Cap 4 4 4 6 6
02-07 Quick Filler Nozzle 1 1 1 1 1 13-03 Eliminator 4 4 4 6 6
02-08 Float Valve Assembly 1 1 1 1 1 14-01 Frame Ass'y Main Pipe 2 2 2 2 2
02-09 Over Flow 1 1 1 1 1 14-02 Frame Ass'y Main Pipe - - 2 2 2
02-10 Suction Strainer 1 1 1 1 1 15-01 Motor Base 1 1 1 1 1
02-12A Connector Pipe 1 1 1 1 1 15-02 U-Bolt - - 8 8 8
02-13 Elbow 2 - - - - 16-01 Motor 1 1 1 1 1
02-16 Elbow 1 1 1 1 1 16-02 Speed Reducer 1 1 1 1 1
03-01 Water Basin 5 8 8 8 8 16-03 Fan Key 1 1 1 1 1
04-00 Casing Supporter 6 8 8 8 8 16-04 Fasten Nut 1 1 1 1 1
04-02 Stiffener Ring - 1 - - - 8 8 16-05 Lock Nut - - 1 1 1
05-01A Casing Diffuser 6 - 8 8 8 17-01 Fan Hub 1 1 1 1 1
05-02 Casing Cylinder 8 - - - -
05-06 Hand Hole Cover 1 1 1 1 1 17-02 Fan Blade 4 4 4 4 4
06-01 Stand Pipe 1 1 1 1 1 17-04 U-Bolt 8 8 8 8 8
06-02 Stand Pipe Base - 1 1 1 1 18-01 Fan Guard 2 2 2 2 2
06-03 Packing - 1 1 1 1 20-01-A Louver Supporters 12 16 16 16 16
07-02 Column 2 2 1 1 1 20-01-B Down Plug 12 16 16 16 16
08-01 Filling Supporter - A 6 8 8 8 8 20-01-C Up Plug 12 16 16 16 16
08-02 Filling Supporter - B 6 8 8 8 8 20-01-D Up Plugs - - - 16 16
08-03 Filling Supporter - C 12 16 16 16 16 20-02 Inlet Louvers -Std. Type 12 16 16 16 16
08-04 Fill Supt. Clamping Band 12 16 16 16 16 20-08 Wing Bolts 24 32 48 48 48
10-01 Ladder (A Section) 1 1 1 1 1 20-09 Plastic Washers 24 32 48 48 48
10-02 Ladder (B Section) 1 1 1 1 1 25-01 Tie Retainers - 4 4 4 4
10-03 Ladder Bracket - A 2 2 2 2 2 25-02 Tie Retainers - 4 4 4 4
10-04 Ladder Bracket - B 2 2 2 2 2 26-01 Turn Buckles - 4 4 4 4
11-01 Filling (Inner Section) - - - 2 2 Others Bolts & Nuts 1 Set
A Fiberglass 1 Set
B Polyester Resin 1 Keg
C Catalyst 1 Bottle
*Please check the above mentioned parts within two weeks after the goods are received.
QTY QTY
T T REF. T T
NUMBER DESCRIPTION T T DESCRIPTION T T
2600 2800 NUMBER 2600 2800
2400 2500 2400 2500
2700 3000 2700 3000
01-01 Base Plate - A 6 6 8 8 10-01-1 Ladder (A Section - 1) 1 1 1 1
01-02 Ring Frame 6 6 8 8 10-01-2 Ladder (A Section - 2) - - 1 1
01-03 Truss Pipe - A1 6 6 8 8 10-02 Ladder (B Section) 1 1 1 1
01-04 Truss Pipe - A2 6 6 8 8 10-03 Ladder Bracket - A 2 2 2 2
01-06 Tie Rod 6 6 8 8 10-04 Ladder Bracket - B 2 2 2 2
02-01 Water Sump 1 1 1 1 11-01 Filling (Inner Section) 2 2 - 2
02-02 Outlet Nozzle 1 1 1 1 11-03 Filling (1/3 Section) - - 6 -
02-03 Inlet Nozzle 1 1 1 1 11-06 Filling (1/6 Section) - - - 12
02-04 Over Flow Nozzle 1 1 1 1 11-08 Filling (1/8 Section) 16 16 16 16
02-05 Drain Nozzle 1 1 1 1 12-01 Sprinkler Head 1 1 1 1
02-06 Automatic Filler Nozzle 1 1 1 1 12-02 Center Post 1 1 1 1
02-07 Quick Filler Nozzle 1 1 1 1 12-03 Turnbuckle 6 8 8 10
02-08 Float Valve Assembly 2 2 2 2 12-04 Tension Wire 6 8 8 10
02-09-01 Over Flow 1 1 1 1 13-01 Sprinkler Pipe 6 8 8 10
02-09-02 Over Flow Connector 1 1 1 1 13-02 End Cap 6 8 8 10
02-10 Suction Strainer 1 1 1 1 13-03 Eliminator 6 8 8 10
02-12A Connector 1 1 1 1 14-01 Frame Ass'y Main Pipe 2 2 2 2
02-13 Elbow 3 3 3 2 14-02 Frame Ass'y Stay Pipe 2 2 2 2
03-01 Water Basin 12 12 16 16 15-01 Motor Base 1 1 1 1
04-01 Base Plate - B 6 6 8 8 15-02 U-Bolt 4 4 4 4
04-02 Stiffener Ring - 1 6 6 8 8 16-01 Motor 1 1 1 1
04-03 Truss Pipe - B1 6 6 8 8 16-02 Speed Reducer 1 1 1 1
04-04 Truss Pipe - B2 6 6 8 8 16-03 Fan Key 1 1 1 1
05-01 Casing (Diffuser) 12 12 16 16 16-04 Fasten Nut 1 1 1 1
05-02 Casing (Cylinder) 12 12 16 16 16-05 Lock Nut 1 1 1 1
05-03 Stiffener Ring - 2 6 6 8 8 17-01 Fan Hub 1 1 1 1
05-04 Casing Stand 12 12 16 16 17-02 Fan Blade 4 4 4 4
05-05 Inserted Bar 12 12 16 16 17-04 U-Bolt 8 8 8 8
05-06 Hand Hole Cover 1 1 1 1 18-01 Fan Guard 8 8 8 8
06-01 Stand Pipe 1 1 1 1 19-00 Basin Supporter Ass'y 12 12 16 16
06-02 Stand Pipe Base 1 1 1 1 20-01 Louver Supporter 36 36 48 48
06-03 Packing 1 1 1 1 20-01-B Louver Supporter - B 36 36 48 48
07-02 Column 1 1 1 1 20-02 Inlet Louver 18 18 24 24
08-01 Filling Supporter - A 6 6 8 8 20-01-C Inlet Louver 12 18 16 24
08-02 Filling Supporter - B 6 6 8 8 20-08 Wing Bolt 108 108 144 144
08-03 Filling Supporter - C 18 18 24 24 20-09 Plastic Washer 108 108 144 144
08-04 Fill Supt. Clamping Band 12 12 16 16 Others Bolts & Nuts 1 Set 1 Set 1 Set 1 Set
08-06 Filling Supporter - E - - 16 16
Water Basin Sealing Material
A Fiberglass 1 Set
B Polyester Resin 1 Keg
C Catalyst 1 Bottle
*Please check the above mentioned parts within two weeks after the goods are received.
Warranty
Cooling Tower Systems, Inc. is pleased to provide _____________ ,
located at: ________
_______ .
Purchase Date:
Model No.:
Serial No.: Motor Fan No.:
Frame No.:
V-Belt Speed Reducer No. (If Applicable):
NOTE: An Extended Manufacturer’s Warranty is available, for an additional nominal fee, and is set into place as part
of the original purchase.
INTERNATIONAL ORDERS/WARRANTY:
We at Cooling Tower Systems, Inc. Thank You for your patronage and look forward to adding you as a satisfied
customer.