Beruflich Dokumente
Kultur Dokumente
Picture #2: Add (dropwise) 1 M NH3 solution, mixing the contents after each drop. Continue to
add until the color changes. Note the new color and the number of drops of 1 M ammonia added
and record it on your Lab Report.
Description: De Jesus, adding an ammonia in
Copper sulfate solution.
Picture #3: To the equilibrium mixture thus obtained, add (dropwise, counting the number of
drops added) 1 M HCl solution until the color changes back to pale blue. Record your
observations on your lab report.
Description: Color changes back to pale blue
Set-up #2:
Picture #1: Place 2 mL of H2PO4/HPO4 solution into a clean and dry test tube.
Description: Tura, put 2mL drops of
H2PO4/HPO4 in a clean and dry test tube.
Picture #2: Add a drop of 1 M HCl to the litmus papers. Record your observations on your lab
report.
Set-up #3:
Picture #1: Prepare a stock solution by adding 1 mL of 0.1 M iron(III) chloride, FeCl3, and 1 mL of
0.1 M potassium thiocyanate, KSCN, to 50 mL of distilled water in a beakerSet up four clean and
dry test tubes and label them. To each test tube, add about 2 mL of the stock equilibrium
mixture you just prepared. Use the first test tube as a standard to which you can compare the
color of the other solutions. To the second test tube add 10drops of 0.1 M iron(III) chloride
solution; to the third add 10 drops of 0.1 M KSCN solution. To the fourth add five drops of
saturated NaCl solution. Observe the color in each test tube and record your observations on
your lab report.
Picture #1: Place 5 drops of 1 M CoCl2 in a dry and clean test tube. Add concentrated HCl
dropwise until a color change occurs.
Picture #2:
Record your observations on the pre lab journal (Report Sheet part). Place 1 mL CoCl2 in a
clean and dry test tube. Note the color. Immerse the test tube into a boiling water bath. Record
your observations on your lab report
Description: Color of CoCl2 after emmersing into a
boiling water.