Beruflich Dokumente
Kultur Dokumente
Search...
B. masquerade
C. tarpit
D. passthrough
false
3. Which tunneling protocol can be created only between two RouterOS devices?
A. GRE
B. IPIP
C. EOIP
D. PPTP
E. L2TP
4. PPPoE server only works within one Ethernet broadcast domain that it is connected to. If there is a router between server and end-user host,
it will not be able to create PPPoE tunnel to that PPPoE server.
true
A. Router's webpage
D. mikrotik.com
6. You want to use PCQ and allow 256k maximum download and upload for each client. Choose correct argument values for the required queue.
7. For static routing functionality, additionally to the RouterOS 'system' package, you will also need the following software package:
B. advanced-tools
C. routing
D. dhcp
8. Which RouterOS packages should be installed on router for SSH server support?
1 of 4 12/11/2015 16:48
MikroTik Routers and Wireless https://www.mikrotik.com/client/?ecom=trai...
A. system
B. advanced-tools
C. ssh
D. security
00:05:29
9. You want to transfer existing '/ip firewall filter' configuration from one router to a new system. Choose the best possible way to do:
D. Export global configuration and remove everything apart from '/ip firewall filter'
10. Is it possible to limit how many clients are able to connect to an access point?
A. Yes
A. both - half of the traffic will be routed through one gateway, half through the other
C. 5.5.5.5
D. 5.6.6.6
12. If a packet comes to a router and starts a new, previously unseen connection, which connection state would be applied to it?
A. unknown
B. new
D. established
E. invalid
13. Which option in the configuration of a wireless card must be disabled to cause the router to permit ONLY known clients listed in the access
list to connect?
A. Security Profile
B. Default Authenticate
C. Default Forward
A. upload
B. upload + download
C. download
D. download - upload
15. An IP address pool can contain addresses from more than one subnet.
2 of 4 12/11/2015 16:48
MikroTik Routers and Wireless https://www.mikrotik.com/client/?ecom=trai...
true
16. It is possible to have PPTP Client and PPTP server on one MikroTik router at the same time.
true
17. In the Route List, the identification DAb for a route stands for
18. Mark all correct statements about /export file={name of an rsc file}.
19. Consider the following network diagram. In R1, you have the following configuration:
/ip route
add dst-address=192.168.1.0/24 gateway=192.168.99.2
On R2, if you wish to prevent all access to a server located at 192.168.1.10 from LAN1 devices, which of the following rules would be needed?
20. When sending out an ARP request, an IP host is expecting what kind of address for an answer?
A. 802.11g
B. MAC Address
C. VLAN ID
D. IP address
21. How many wireless clients can connect, when wireless card is configured to mode=bridge ?
A. 1
B. 2
C. 2007
D. 100
22. Simple Queue number 0 defines 2M for upload and download for target IP 10.10.0.33.
Simple Queue number 1 defines 4M for upload and download for target IP 10.10.0.33. Client 10.10.0.33 is be able to obtain
A. 0M upload/download
B. 6M upload/download
3 of 4 12/11/2015 16:48
MikroTik Routers and Wireless https://www.mikrotik.com/client/?ecom=trai...
C. 4M upload/download
D. 2M upload/download
A. L2TP clients
B. PPPoE clients
C. PPtP clients
D. Router users
E. IPSec clients
F. PPP clients
25. The connect-list is used by ROS to determine which access point a card configured in station mode is allowed to connect to.
true
Finish
4 of 4 12/11/2015 16:48