Individual and Industrial Building Commercial Buildings
Collective Housing and Resort INSTALLATION ONDUPLAST ® 1. Prepare the purlin
Jarak Reng/Gording Jarak Reng/Gording
1.2 m (MAX) 1.2 m (MAX)
2. Pay attention to tilt angle,
overhang and purlin distance
• Recommended min. roof pitch
(tilt angle) is 12° • Recommended max. purlin distance 1.2 M • Recommended purlin distance from the very top of the roof is 10 cm • Allow 30 cm overlap (low pitch 15 cm & 15 cm for steeper one) • Recommended min. overhang distance 10 cm
CORRUGATED UPVC TWIN WALL ROOFING 3. Overlay the top part of
anti-leakage interlocking
ONDUPLAST ® system on top of the
underlap is uPVC corrugated twin-wall roofing engineered to reduce heat Fire Performance: and noise, perfect for industry and residential use. self-extinguishing
Low Maintenance Cost
4. How to install SDS
Fade Resistant Screw roofing SPECIFICATION SCREW INSTALLATION FOR ROOFING Thickness : 10 mm Sound Insulation Width : 840 mm • Put every screw on upper high Effective Width : 800 mm wave structure of roof SCREW INSTALLATION FOR CLADDING Height : 40 mm • Adjust screw with max. 1.2 m Durable purlin distance • Put every screw on the middle lower wave structure Weight : 4.5 kg/Ln • Every 1 m2 needs 4 pcs SDS of roof Color : White, Blue, Translucent screw with 75 mm length • Adjust screw with max 1.2 m purlin distance • On overlap use SDS screw with • Every 1 m2 needs 4 pcs SDS screw with 55 mm length Enviromental Friendly * Tolerance ± 5% 90 mm length • On overlap use SDS screw with 70 mm length ** Length 6000 mm & 7000 mm Individual and Collective Housing
Industrial Building
Commercial Building
PEMESANAN HUBUNGI:
Untuk detail pemasangan lebih lengkap dapat
menghubungi: teknik@ondulineindonesia.com
ONDULINEID ONDULINE_ID ONDULINE INDONESIA ONDULINE INDONESIA