Silica Fume (Mircosilica) is composed of silicon dioxide (SiO2), collected from silicon metal and ferrosilicon Property Typical Results produced, as unidentified form. Color of silica fume is SiO2 >92% from gray white to gray. For greater convenience, Kenal densified silica fume with twice the bulk density. Moisture < 3% Densified silica fume is more economical for transportation, as its higher density allows bulk handling Loss on Ignition < 6% methods, and reduced shipping cost Bulk Density 0.55 – 0.70 T/m3
Advantages Pozz Act Index >105%
Improve the compressive strength, flexible Specific surface area >15m2/gm
strength, and impermeability, anti-septic, wear proof and shock resistance etc of concrete *The above properties are average laboratory values obviously. Avoid segregation and weeping, increase the Dosage pump ability of concrete. Usually, the dosage of silica fume is 5-10%. If used with Extend the service life of concrete, especially in GGBS etc. mineral additive, the dosage of total mineral sulphate, chloride and high dampness etc. additive may be not exceeding 50%. environmental extremes. Reduce the falling ash of spray concrete and grouting. It is the indispensable material of high Packing strength concrete. 950 or 1000 KG bags. Avoid alkali aggregate reaction effectively. Improve the compactness of casting refractory Precautions materials. Store inside or outside should be properly situated away from incompatible materials, i.e., strong acids. Avoid Uses prolonged or repeated skin contact. Avoid freezing. Avoid Silica fume is ideal for use in structures exposed contact with the eyes, skin and clothing. Wash thoroughly to chemical and environmental attack, such as after handling. Keep out of reach of children. Parking garages, Bridge decks, Marine structures, Slabs, Roadways etc. Health & Safety In precast concrete (made in a manufacturing As with all chemical products, caution should always environment) it is more efficient, and results in be exercised. Protective clothing, such as gloves and cost and Timesaving, it has High early and higher goggles, should be worn. See packaging/MSDS for ultimate compressive strengths, Eliminates steam specific instructions. curing, Savings on heating costs and rapid Treat any splashes to the skin or eyes with fresh water turnover of forms. immediately. Should any of the products be accidentally In shotcrete applications, there is less material swallowed, do not induce vomiting, but call for medical waste and greater efficiency of product use. assistance immediately. It has High electrical resistively and The information contained herein is to the best of our knowledge, belief, and impermeability, Significantly less rebound loss, accuracy. However, hence the conditions of handling and usage beyond our Mitigates reinforcing steel corrosion, improved control. We make no warrantee of results, and assume no responsibility or liability bonding strength, thicker applications with each for any damages or consequential damage incurred by the use of the product. nozzle pass. Our products are sold on the condition that the user shall evaluate them, as well as our recommendations. To determine their suitability for a particular purpose. The user is solely responsible for the selection of Castech products.