Manifold and Related Parts The exhaust manifold is a three-piece design utilizing a bellows pipe connecting the front and rear exhaust manifold to the center exhaust manifold. The exhaust manifold is made of cast-iron and has a bellows pipe clamped to each exhaust pipe section. The exhaust manifold is attached to the cylinder head with twelve special alloy hardened bolts. The exhaust manifold outlet flange is bolted directly to the turbocharger turbine housing with four studs and nuts. Two gaskets are placed between the exhaust manifold and the cylinder head to prevent exhaust gas leaks.
DD13 Exhaust Manifold
1. Mounting Bolt (12 Qty)
2. Washer (12 Qty) 3. Gasket (2 Qty) 4. Exhaust Manifold Left 5. Bellows (2 Qty) 6. Clamp 7. Exhaust Manifold Center with EGR Valve 8. Exhaust Manifold Right Figure 1. DD13 Exhaust Manifold DD15 Exhaust Manifold
1. Mounting Bolt (12 Qty)
2. Washer (12 Qty) 3. Gasket (2 Qty) 4. Exhaust Manifold Left 5. Bellows (2 Qty) 6. Clamp (2 Qty) 7. Exhaust Manifold Center 8. Exhaust Manifold Right Figure 2. DD15 Exhaust Manifold GHG14 DD15 AT Exhaust Manifold
1. Mounting Bolt (12 Qty)
2. Washer (12 Qty) 3. Gasket (2 Qty) 4. Exhaust Manifold Left 5. Bellows (2 Qty) 6. Clamp (2 Qty) 7. Exhaust Manifold Center 8. Exhaust Manifold Right Figure 3. GHG14 DD15 AT Exhaust Manifold EPA10 DD16 High-Horsepower Exhaust Manifold
1. Mounting Bolt (12 Qty)
2. Washer (12 Qty) 3. Gasket (2 Qty) 4. Exhaust Manifold Left Outer 5. Bellows 6. Clamp 7. Exhaust Manifold Left Inner 8. Exhaust Manifold Center 9. Exhaust Manifold Right 10.Exhaust Manifold Right Inner Figure 4. EPA10 DD16 High-Horsepower Exhaust Manifold