Sie sind auf Seite 1von 56

Tender Inviting Authority: General Manager, Gomti Pollution Control Unit, U.P.

Jal Nigam, Lucknow


Name of Work:Survey, Investigation, Design, Supply, Construction, Installation, Testing and Commissioning of 39 MLD STP STRENGTHENING OF EXISTING 56 MLD STP A
Contact No. 9473942562

Bidder
Name :
PRICE SCHEDULE
NUMBER # TEXT # NUMBER # TEXT # NUMBER #

Sl. Item Description Quantity Unit NET UNIT RATE In


No. Figures To be entered by
the Bidder
Rs. P

1 2 3 4 5
1 39MLD STP at Daulatganj - Survey, Investigation, Design, Supply, Construction, 1.000 Job
Installation, Testing and Commissioning of 39 MLD STP on appropriate and cost
effective Technology including 39 MLD MPS, Interconnection of old MPS, Preliminary
treatment of waste water/raw sewage, Primary treatment of preliminary treated waste
water/sewage, secondary treatment, tertiary treatment (if required to achieve treated
effluent parameters as per tender documents), Sludge handling, sludge digestion,
outfall sewer, treated water pumping, required buildings, earth filling, site
development & allied works in an odour free environment as per scope of bid
document/pre bid replies at Daulatganj, Lucknow with one year of Defects Liability
Period for civil works and 2 year DLP for E/M works that shall include but not limited
to getting NOC from different departments, vetting of design drawing from IIT, third
party testing of influent, treated effluent, sludge, demolishing of required existing
structure & other related works.

2 1 MLD STP at Bairikala - Survey, Investigation, Design, Supply, Construction, 1.000 Job
Installation, Testing and Commissioning of 1 MLD STP on appropriate and cost
effective technology , Preliminary treatment of waste water/raw sewage, Primary
treatment of preliminary treated waste water/sewage, secondary treatment, tertiary
treatment (if required to achieve treated effluent parameters as per tender
documents), Sludge handling, sludge digestion, , outfall sewer, treated water
pumping & allied works in an odour free environment as per scope of bid
document/pre bid replies at Barikala, Lucknow with one year of Defects Liability
Period for civil works and 2 year DLP for E/M works that shall include but not limited
to getting NOC from different departments, vetting of design drawing from IIT, third
party testing of influent, treated effluent, sludge, demolishing of required existing
structure & other related works.

3 I &D Work (Civil) for Bairikala


Approach Channel
Excavation in ordinary soil including disposal of surplus earth lift upto 1.5 mtr. & lead
upto 50m, filling watering & ramming of excavated earth, into the trenches and
disposal of surplus earth upto a distance of 50m from the centre of the foundation
trenches.

3.01 0.00 - 1.50 m 99.360 cum


3.02 1.50 - 3.00 m 91.080 cum
3.03 3.00 - 4.50 m 82.800 cum
3.04 4.50 - 6.00 m 6.260 cum
4 Provide and fix close timbering in trenches below G.L. consisting of 40mm thick
approved country wood plank for polling boards 125mm x 75 mm Indian eucalyptus
Wood Walers and 100 mm dia eucalyputs wood ballies for strut at
1.50 m c/c for the proper complete in all respect ( Below Ground
level)
4.01 3.00 - 6.00 m 14.960 cum
5 Provide and lay Ist class brick ballast 40mm gauge with local sand and cement in 11.040 cum
proportion of 12:6:1 in foundation including supply of material labour and T&P
required with compaction for proper completion of work (4.50 - 6.00 m
below GL)

6 Cement concrete with 20 mm gauge stone ballast, local sand and cement in 11.040 cum
proportion 8:4:1 in foundation including
supply of all materials, labour, T&P etc. required for proper
completion of work ( 4.50- 6.00 m below GL)

7 R.C.C. work with cement, coarse sand and 20 mm gauge stone ballast in proportion 10.040 cum
of M30 in wall excluding supply of reinforcement and its bending but including its
fixing & binding labour, materials and T&P etc. required for proper
completion of work ( Above gound level )

7.01 ( Below gound level ) , ( 0-1.5 mtrs) 13.190 cum


7.02 ( Below gound level ) , ( 1.5-3.0 mtrs) ( M- 30) 18.860 cum
7.03 ( Below gound level ) , ( 3.0-4.50 mtrs) (M-30) 12.810 cum
8 RCC partition wall 24.840 cum
9 Same as above but in foundation ( 3.00 - 4.50 m BGL (M30)) 13.250 cum
10 Steel or iron work in plain work such as in RCC work wrought to required shape as 146.000 Qtl
necessary including bending for
proper completion of the work including supply of the steel labour
T&P for proper completion of work

11 Supply and fixing of 1.50 m wide and 1.20 m high MS screen made of 10 mm thick 2.000 Qtl
40mm wide flat iron with angle
frame 55X55X10mm including T&P labour material for grouting
and proper completion of work

12 Provision for coffer dam and required pumping to divert nala flow during construction 1.000 Job
of Nala flow during construction
Nala cross wall (weir) including supply of all materials, labour,
T&P etc. and its maintenance complete.

13 Baling out of water from the excavated trench with help of pumps as well as manually 1.000 Job
as and when required including
supply of pumps, diesel, mobil oil, waes of operators etc. complete
for proper completion of works.

14 Disposal of surplus earth at proper place by truck upto a distance of 8 Km. including 190.370 cum
loading, unloading etc., complete
in all respect
15 Barricading of trench area during excavation by balli posts and horizontal members 16.400 rm
fixed together properly,complete in
all respect.
16 Fabricate, supply and fix steel ladder made of angle bars or of equivalent section as 7.960 rm
approved by engineers 65 X 65 X
6 and 25 mm round bars including supply of material labour and
T&P etc for proper completion of work

17 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, 19.600 rm
channels, plates etc., including welding, grinding, buffing, polishing and making
curvature (wherever required) and fitting the same with necessary stainless steel
nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless
steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor
or the side of waist slab with suitable arrangement as per approval of Engineer-in-
charge, ( for payment purpose only weight of stainless steel members shall be
considered excluding fixing
accessories such as nuts, bolts, fasteners etc.)

18 Remodelling of naala and Provision for construction of broad crested cement 1.000 Job
concrete weir in main naala for diversion
of flow including supply of all material, T&P etc. for proper
completion of work.

19 Bypass Arrangement with fixing of actuator based mechanized SS/CRS gates and 1.000 Job
discharge mesurement in bypass arrangement

20 Grit Chamber cum Collection Chamber


Excavation in ordinary soil including disposal of sruplus earth lift upto 1.5 mtr. & lead
upto 50m, filling watering & ramming of excavated earth, into the trenches and
disposal of surplus earth upto a distance of 50m from the centre of the foundation
trenches.

20.01 0.00 - 1.50 mtrs 26.210 cum


20.02 1.50 - 3.00 mtrs 23.900 cum
20.03 3.00 -4.50 mtrs subsoil 21.590 cum
20.04 4.50 - 6.00 mtrs subsoil 29.580 cum
20.05 6.00 - 7.50 mtrs subsoil 106.710 cum
21 Provide and fix close timbering in trenches below G.L. consisting of 40mm thick
approved country wood plank for polling boards 125mm x 75 mm Indian eucalyptus
Wood Walers and 100 mm dia eucalyputs wood ballies for strut at
1.50 m c/c for the proper complete in all respect ( Below Ground
level)

21.01 3.00 - 6.00 mtrs subsoil 7.710 cum


22 Provide and lay Ist class brick ballast 40mm gauge with local sand and cement in 2.830 cum
proportion of 12:6:1 in foundation including supply of material labour and T&P
required with compaction for proper completion of work (4.50 - 6.00 m
below GL) in sub soil

23 Cement concrete with 20 mm gauge stone ballast, local sand and cement in 2.830 cum
proportion 8:4:1 in foundation including
supply of all materials, labour, T&P etc. required for proper
completion of work ( 4.50- 6.00 m below GL) in sub soil

24 R.C.C. work with cement, coarse sand and 20 mm gauge stone ballast in proportion 4.890 cum
of M30 in wall excluding supply of reinforcement and its bending but including its
fixing & binding labour, materials and T&P etc. required for proper
completion of work ( Above gound level )

24.01 Below ground level ( 0.00 - 1.50 Mtrs) 2.270 cum


24.02 1.50 - 3.00 mtrs 2.940 cum
24.03 3.00 - 4.50 mtrs ( But in M-30 ) 4.110 cum
24.04 4.50 - 6.00 mtrs ( But in M-30) 5.020 cum
25 Same as above but in Raft
25.01 6.00 - 7.50 mtrs ( But in M-30 ) 2.930 cum
26 Mild steel or iron work in plain work such as in RCC work wrought to required shape 37.000 Qtl
as necessary including bending for
proper completion of the work including supply of the steel labour
T&P for proper completion of work

27 Disposal of surplus earth at proper place by truck upto a distance of 8 Km. including 72.980 cum
loading, unloading etc., complete
in all respect
28 Barricading of trench area during excavation by balli posts and horizontal members 15.000 rm
fixed together properly,complete in
all respect.
29 Fabricate, supply and fix steel ladder made of angle bars or of equivalent section as 11.010 rm
approved by engineers 65 X 65 X 6 and 25 mm round bars including supply of
material labour and T&P etc for
proper completion of work

30 Supply and fixing of MS Jali to cover the twin grit chamber etc. 9.770 sqrtm
(55x55x10 angles and 20x10 flats @53.10 kg/sqm)
31 Supply and fixing of 10mm thick MS sheet proportional flow weir. 10.000 Qtl

32 Perforated RCC (M20) platform size of 2 m wide and 0.15 m thick. 1.140 cum

33 Inspection plateform of PCC (1:2:4) over base conc. (1:4:8) along 8.940 sqrtm
the girt chamber.

34 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, 8.940 rm
channels, plates etc., including welding, grinding, buffing, polishing and making
curvature (wherever required) and fitting the same with necessary stainless steel
nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless
steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor
or the side of waist slab with suitable arrangement as per approval of Engineer-in-
charge, ( for payment purpose only weight of stainless steel members shall be
considered excluding fixing
accessories such as nuts, bolts, fasteners etc.)
35 Barricading of both side of trenches with the help of Balli, Bamboo etc. in three rows 9.420 mtrs
upto 1m high post should be fixed
at 3m etc. including all labour, materials etc. complete as per
direction of Enginner in charge measurement of barricating will be only one side.

36 Excavation in foundation in kankar mixed soil including lift as specified and lead upto 210.980 cum
50 m filling water and ramming of excavated into the trenches or into the space
between the building and the sides of foundation trenches or into the plinth and
disposal surplus earth upto a distance of 50m from the centre of foundation for sump
well and SV chamber.(
10.50 - 12 mtrs below GL )

37 Supply, fabrication and fixing of well kerb cutting edge which includes angle section 44.370 MT
and MS plate including supply of
labour material and T&P required for proper completion of work (
9.00- 10.5 mtrs below GL)

38 Sinking of sump well wall of 15.00 m dia in all type of soil below ground level
including supply and errection of all working T&P and equipment as well as loading
and unloading of weight also including excavation of earth & bailing out of water
when and where required with all T&P for proper sinking and including bituminastic
painting of internal surface of sump wall . (in case of variation from dia of sump, rates
for other dia sump shall be decided by square of adopted
dia)

38.01 1.50 - 3.00 mtrs 1.500 mtrs


38.02 3.00 - 6.00 mtrs 3.000 mtrs
38.03 6.00 - 9.00 mtrs 3.000 mtrs
38.04 9.00 - 12 mtrs 1.230 mtrs
39 Provide & lay.stone boulders due to foul condition for making firm bed including 28.260 cum
dewatering and supply of material
labour T&P etc required for proper completion of work ( 10.50 -
12.00 m (below GL))

40 Cement concrete with 20mm gauge approved stone ballast, Coarse sand and 28.260 cum
cement in proportion 8:4:1 including supply of all materials, labour T&P etc. required
for proper completion of work below GL including dewatering.( for
sump well - 9.00 - 10.50 mtrs )

41 RCC work with cement, coarse sand and 20mm gauge stone ballast in proportion of 32.500 cum
M20 (excluding cost of reinforcement and its bending) but including its fixing and
binding with 0.50mm thick binding wire (to be supplied by the contractor) and
necessary shuttering, supply of all materials, labour T&P etc. required for proper
completion of work.
RCC foundation For Sump Well in M30 ( 9.00 - 10.50 m)

42 RCC work with cement, coarse sand and 20mm gauge stone ballast in proportion of 35.490 cum
M20 (excluding cost of reinforcement and its bending) but including its fixing and
binding with 0.50mm thick binding wire (to be supplied by the contractor) and
necessary shuttering, supply of all materials, labour T&P etc. required for proper
completion of
work.RCC WALL For Sump Well ( Above GL (0.00 - 1.50 m))

42.01 Above GL (1.50 - 3.00 m) 16.090 cum


42.02 Well curb 35.490 cum
42.03 For Sump Well Beam (2 nos.) ( Below GL (0.00 - 1.50 m)) 11.190 cum
42.04 Above GL (1.50 - 3.00 m) 11.190 cum
42.05 RCC Plateform ( Below GL (0.00 - 1.50 m) 5.400 cum
42.06 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, 18.840 mtrs
channels, plates etc., including welding, grinding, buffing, polishing and making
curvature (wherever required) and fitting the same with necessary stainless steel
nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless
steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor
or the side of waist slab with suitable arrangement as per approval of Engineer-in-
charge, ( for payment purpose only weight of stainless steel members shall be
considered excluding fixing
accessories such as nuts, bolts, fasteners etc.)

42.07 Fabricate, supply and fix MS ladder made of MS angle 65x65x5 17.010 rm
and 25 mm round bars
43 PUMP House 4.200 cum
Ist class Brick work in 1:4 cement & coarse sand mortar including supply of material
labour T&P etc required for proper completion of work

44 RCC work with cement, coarse sand and 20mm gauge stone ballast in proportion of 24.900 cum
M20 (excluding cost of reinforcement and its bending) but including its fixing and
binding with 0.50mm thick binding wire (to be supplied by the
contractor) and necessary shuttering, supply of all materials,
labour T&P etc. required for proper completion of work.

45 Mild steel or iron work in plain work such as in RCC work wrought to required shape 37.822 Qtl
as necessary including bending for
proper completion of the work including supply of the steel and
wastage.

46 12mm thick Plaster in 1:4 (cement and coarse sand) 193.740 sqrtm
47 Ornamental plaster on out side of PH @ 10% extra rates 193.740 sqrtm
48 Flooring
49 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with 33.130 sqrtm
grey cement slurry
mixed with pigment to match the shade of the slab, including rubbing and polishing
complete with base of cement mortar 1: 4 (1
cement : 4 coarse sand)

50 40 mm thick pcc flooring with cement , coarse sand and 20 mm 20.130 sqrtm
gauge stone ballast in proportion of (1:1.5:3)

51 Cement plaster skirting upto 30 cm height, with cement mortar 1:3 1.600 sqrtm
(1 cement : 3 coarse sand)

52 Providing and supplying door, window and ventilator of aluminium extruded tubular 84.300 sqrtm
and other aluminium sections as per the architectural drawings and approved shop
drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS
1474,including super durable powder coating of 60-80 microns conforming to AAMA
2604 of required colour and shade
as approved by the Engineer-in-Charge.

53 one priming coat & 2 coat oil distemeper inside of PH .Painting (two or more coats) 193.740 sqrtm
on including a priming coat of ready
mixed zinc chromate yellow primer on new work
54 one weather prime coat and two coat of oil distemper on outside of PH including 193.740 sqrtm
supply of all material,labour,T&P etc
required for proper completion of work
55 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied 192.730 sqrtm
as per manufacturer’s
specifications including supply of all material,labour,T&P etc
required for proper completion of work

56 Fixing of AC Down Pipe 100mm wih sufficient no. of clamp including supply of all 1.000 job
material,labour,T&P etc required for
proper completion of work
57 Provision of lightening conductor 1.000 job
58 Providing ganntry girder beam with movable trolly for lifting arrangement in PH 1.000 job
(ISMB : 450) inclulding supply of all
material, labour T&P etc
59 Providing and fixing of M.S. Gratings 43.350 kg
60 Provision for soil testing of pumping station as per IS 2720 1.000 Job
61 Dewatering of the area 1.000 job
62 Staff Quarter, Generator Room, tin shade for sweepers, Approach Road (interlocking 1.000 Job
tile rubber moulded 80 mm thick
50 sq m & CC road 100 sqm) & Site Development including Special T&P, single seat
toilet, submersible pump based water supply with 1.00 KL overhead tank, Solar high
mast light and
Hiring of Godown

63 Approach Sewer to connect the collection chamber with sump (ISI marked 1100 mm 1.000 job
dia RCC NP3 S&S pipe)
incluuding supply. Carting jointing, bedding as per design, refilling of trenches,
barricading, open and close timbering and shifting of utilities etc required for proper
completion of works as per direction
of Engineer incharge
64 Rising Main Earth 126.000 cum
work in excavation in pipe line trenches in ordinary soil left upto 1.5m and lead upto
50m filling /watering and ramming of excavated earth in to the trenches and disposal
of surplus earth
etc. for completion of work. ( 0-1.5 mtrs)

64.01 1.5 mtrs - 3.00 mtrs 18.000 cum


64.02 Supply of 200mm dia DI Class K9 pipe including specials etc as 60.000 mtrs
per IS 8329

64.03 Carting laying and jointing of 200mm dia DI pipe in excavated 60.000 mtrs
trenches as per IS 12288
64.04 Air valve chamber earthwork in excavation work of 1.75 m deep providing PCC of 1.000 nos
1:4:8 in foundation with 20 mm size
blalast stone ,12 mmthick plaster of 1:4 cement motar and RCC
work in slab of 1:1.5:3(cement :sand:aggregate)

64.05 Supply & fixing in position Air valves over pipe line 1.000 nos.
64.06 Scour Valves Chambers earthwork in excavation work of 1.75 m deep providing 1.000 nos.
PCC of 1:4:8 in foundation with 20 mm size blalast stone ,12 mmthick plaster of 1:4
cement motar and RCC work in slab of 1:1.5:3(cement
:sand:aggregate)

64.07 Supply and fixing in position scour valves over pipe line 1.000 nos.
64.08 Gate valve chambers earthwork in excavation work of 1.75 m deep providing PCC 1.000 nos.
of 1:4:8 in foundation with 20 mm size blalast stone ,12 mmthick plaster of 1:4
cement motar and RCC
work in slab of 1:1.5:3(cement :sand:aggregate)

64.09 Supply and fixing in position Gate/Sluice valves over pipe line 1.000 nos.
64.1 Barricading all around the trenches for safety to avoid any type of 120.000 mtrs
accident.

64.11 Mild steel or iron work in plain work such as in RCC work wrought to required shape 22.800 qtl
as necessary including bending for
proper completion of the work including supply of the steel and
wastage.

65 I & D Work (E&M) for Bairikala 3.000 Set


SITC of Pumping Plant of approved make confirming to IS no 5600-
Non clog, single stage, bottom suction submersible sewage pump suitable for
handling raw sewage of specific gravity
1.03 driven by submersible electric motor suitable for operation on 415 ± 6 % volt, 3
phase, 50 Hz, AC supply system along with 20 mtr. submersible cable and having
following specification- Capacity - 20 LPS RPM - 1500
MOC- Casing - 2% NiCi Impeller - CF 8 M Shaft - AISI 410

66 Accessories of each submersible pumping plant 3.000 Set


(a) Pedestal with autocoupling (SS)
(b) S.S. guide pipe approx
(c) S.S. chain with shackles approx
(d) C.I.D.F, bend 100 mm dia x 900

67 SITC of Starter confirming of IS/IEC 60947 3.000 Nos


SOFT starter of approved make for suitable operation on 415 ± 6
% volt, 3 Phase, 50Hz, AC supply suitable for starting and running of electric motor
and 8 to 12 starts and stops per Hr.

68 Main pipes , valves and specials 3.000 Nos


Moter operated C.I.D.F. rising spindle type, sluice valve with actuators conforming to
IS : 14846 suitable for sewage application 150 mm dia size

68.01 C.I.D.F. Reflex valve conforming to IS: 5312 suitable for sewage 3.000 Nos
applicable 150 mm dia size
68.02 SITC of Actuator operated sluice valve of 200 mm dia 1.000 Nos
68.03 C.I.D.F. dismantling joint 150 mm dia size 3.000 Nos
68.04 C.I.D.F. dismantling joint 200 mm dia size 2.000 Nos
68.05 C.I. pipes and specials - 25.540 Qtl
C.I.D.F. Enlarge 100 mm x 150 mm dia
C.I.D.F. pipe 100/150 mm dia
C.I.D.F. pipe 200 mm dia
C.I.D.F.90 bend 100/150 mm dia
C.I.A.F. pipe Tee 200 mm x 200 mm x 100/150 mm dia
C.I. blind flange 200 mm dia

68.06 Necessary MS, Nut-Bolt and washer for complete and proper installation of piping 1.000 job
and pumps as per direction of
engineer incharge
68.07 Necessary SS Nut-Bolt and washer for complete and proper installation of piping 1.000 Job
arrangement and pumps as per
direction of engineer incharge
68.08 Necessary rubber packing of suitable size 150 mm and 200 mm for complete 2.000 Lot
installation of piping arrangement and
pumps as per direction of engineer incharge
69 0.415 KV L.T. control panel for pumping plant 1.000 Set
L.T. control panel having 2 Nos. incoming and 5Nos. outgoing panels suitable to
operated on 415 ± 6 % volt , 3 Phase , 50 Hz, AC supply as per details given below
or as per details engineering drawing approved by engineer -
(A) 2 Nos incoming panels (1 No. for D.G. set and 1 No. for power supply from LT
End) each consisting of following items - (i)400 amp ACB - 1 No., (ii) C.Ts of suitable
ratio - 1 No., (iii) Ammeter with selector switch - 1 No.
(iv) Voltmeter with selector switch - 1 No., (v) Power factor meter(0.5 Lag&0.5Lead) -
1 No.
(vi) Frequency meter - 1 No., (vii) KWH meter - 1 No.,
(viii) 2 Pole over current relay& one pole earth fault relay - 1 No. (B)Bus bar chamber
having 3 Nos. bus bars for phase and 1 No. bus bar for neutral of suitable size – 1 No
(C) 3 Nos. composite panels for pumping plants, each consisting of following items –
(i)63/100 amp MCCB/ACB – 1 No., (ii)C.Ts. of suitable ratio - 1 No., (iii)Ammeter with
selector switch - 1 No. (iv)Power capacitor controlled by main switch of suitable
rating - 1 No.
(v)Thermal over load protection - 1 No., (vi)Reverse rotation trip device - 1 No.
(vii)Automatic start / stop device according to level in the sump - 1 No. (viii)Indicating
lamps(Auto/manual/low level/ reverse rotation) - 1 Set
(D) 2 Nos. outgoing panels for miscellaneous works, each consisting of following
items –
(i) MCCB of 100 amp capacity - 1 No., (ii)C.Ts. of suitable ratio - 1 No., (iii)Ammeter
with selector switch - 1 No., (iv) Indicating lamps. – 1 Set
(E) 1 Nos. outgoing panels for miscellaneous works, each consisting of following
items –
(i) MCCB of 63/32 amp capacity - 1 No., (ii) C.Ts. of suitable ratio -

70 Mono rail traveling trolley with actuator operated chain pulley block confirming 1.000 Set
to IS 3938
Actuator operated Mono rail traveling trolley with chain pulley
block of 1.5 Ton capacity having 6 mtr. lift complete with hand chain for installation of
pumping plants

71 Sewage level regulator/controller 1.000 Set


Ultrasonic level regulator/ controller for measuring sewage level in the sump suitable
for indication of low and high level in mtrs.

72 Pressure TRANSMITTER to be installed with pumps 4.000 Set


pressure gauge complete with necessary Cu. tubing, stop cock and necessary fittings
suitable for sewage applicable

73 Power and control cable confirming to IS 694 100.000 M


The 95 sqmm 3.5 core size of cables or as per actual design calculation approved
by engineer required for power wiring from
L.T. panel of sub station to L.T. panel of pump house

74 The 10 sqmm 3.5 core size of cables or as per actual design calculation approbed by 125.000 M
engineer required for power
wiring from L.T. panel of pump house to starters
75 Earthing confirming to IS 3043 1.000 Job
Double earthing of all electrical equipments as per latest IER/PWD specification
complete with salt, charcoal, G.I. earth electrodes, watering pipe, C.I. earth boxes
and G.I. earth strips of adequate size.
76 Construction of foundation for pumping plants, starters and panels. 1.000 Job
As per direction of engineer incharge

77 Installation of pumping plants and all related equipments at site as 1.000 Job
per direction of engineer incharge

78 Commissioning of all pumping plants and related equipments at 1.000 Job


site.

79 Painting of all equipments 1.000 Job


80 Internal and external electrification of pump house, sub-station 1.000 Job
room and campus.
81 Spares 1.000 Set
provision of spare pump set as per CPHEEO mannual to have 100
% stand by of peak flow

82 Tools & Plants: 1.000 Lot


Supply of Tools
(i) HT Megger- 1 no.
(ii) LT Megger- 1 no.
(iii) Hydraulic crimping tool- 1 no.
(iv) Manual crimping tool- 1 no.
(v) Clamp multimeter- 1 no.
(vi) Chain wrench
(vii) Pipe wrench
(viii) Screw wrench
(ix) Ring spanners
(x) Double ended spanners
(xi) Insulated pliers
(xii) Hammer with handle
(xiii) Hexa blade frame
(xiv) Measuring tape of different size
(xv) Sprit level set
(xvi) Filler gauge
(xvii) Chisel (150, 200mm)
(xviii) File (Flat, half round, round and triangular) (xix)Power Drill
(xx) Other Tools as specified

83 (i) Providing, Installation, Testing and commissioning of 200 mm ELECTRO 1.000 Set
MAGNETIC FLOW METER cum totalizer having following charecteristics/MOC:
Liner: Polyurethane or Hard Rubber / Electrode MOC: SS316L /Housing : Die Cast
Aluminium or CS / Power Supply: 90-230 V AC / Output: 4-20mA with HART / Sensor
Cable : 10 mt / Flow Tube or Sensor housing protection IP68 / Process Flange :
SS316 / Display : 3 1/2 LCD Display / Cable Connection :
1/2"NPT /Accuracy : 0.5%

84 CVT with control cables above flow meter 1.000 Job


85 Mini tubewell for campus water requirement complete in all 1.000 Job
respect
86 Pole mounted Solor LED 1*18W Street lighting Fixture Installation 6.000 Job

87 Provision of rubber matting /resistance sheet confirming to IS 1.000 Job


15652
88 Provision of saftey equipment as direction of engineer incharge 1.000 Job

89 Dredging pump with 15 Meter hose pipe ,panel/starter ,cable 1.000 Set
complete
90 Exhaust fans of suitable capacity 4.000 Nos
91 Manual bar Screen 1.000 Nos
Provision of CR steel manual coarse bar screen having clear gap between
screen bar- 50 mm, size of flat shall be as per actual site condition angle of
installation 70º . Complete

92 Mechanical Bar Screen should confirm to IS 6280 2.000 Nos


Provision of Stainless Steel (SS 316) mechanical bar screen having clear gap
between screen bar- 30 mm, size of SS flat shall be as per actual site requirement
angle of installation - 70º duly followed with dismantling of existing manual screen
and installation of mechanical screen including all necesary civil work required for
proper completion of work , conveyer system, electric
motor, starter, cable, panel, bins etc.

93 Sluice Gate
93.01 Provision of CI Thimble Mounted Sluice Gate with motor, actuator operated, Rising 1.000 Nos
Spindle type. Sluice gates are as per IS 13349 Including all taxes, Freight, loading,
unloading, fitting in position including Sluice gates are upward opening wall thimble
mounted suitable for isolating the flow of sewer into out of the opening in the wall. It
consists Gate frame, wall thimble, gate slide, shutter, seating/sealing faces .The
gates will be provided with pads on sides, top and bottom to mount the wedges. The
gate shall be designed in such a manner, so that it can be operated at 2 meter head.
Gate frame & Shutter of CI Grade IS 210 FG 260, Head Stock assembly bolts & SS
ASTM A276 Type316, Stem, Operating Nut SS ASTM A276 Type 316., Duly tested
for tensile strength, Tested for over all dimensions as per
approved GA drawing complete in all respect as per specification and direction of
Engineer, For by pass

93.02 Provision of CI Thimble Mounted Sluice Gate with motor, actuator operated, Rising 3.000 Nos
Spindle type. Sluice gates are as per IS 13349 Including all taxes, Freight, loading,
unloading, fitting in position including Sluice gates are upward opening wall thimble
mounted suitable for isolating the flow of sewer into out of the opening in the wall. It
consists Gate frame, wall thimble, gate slide, shutter, seating/sealing faces .The
gates will be provided with pads on sides, top and bottom to mount the wedges. The
gate shall be designed in such a manner, so that it can be operated at 2 meter head.
Gate frame & Shutter of CI Grade IS 210 FG 260, Head Stock assembly bolts & SS
ASTM A276 Type316, Stem, Operating Nut SS ASTM A276 Type 316., Duly tested
for tensile strength, Tested for over all dimensions as per
approved GA drawing complete in all respect as per specification and direction of
Engineer, For screen channels

94 Installation & Commissioning 1.000 Job


Installation & commissioning of all screens and sluice gates complete. As per
direction of engineer in charge
95 Supply of silent type DG set , engine ,alternator as per ISO 8528 capable of 1.000 Set
developing 25 KVA at 415+6% ,50Hz AC at.85 P.F. lagging and self exciting coupled
with suitable BHPdiesel engine through flexible coupling and mounted on common
base plate complete with fuel tank inside the acousting system and inbuilt control
panel 12 volt lead acide Battery with lead silencer manual control panel & AVM pads
D.G. set shall be mounted in open sky resting on the
foundation as per the design.noise level and pollution level of D.G.
set should comply with latest CPCB norms

96 Suitable AMF panel floor mounting type comprising of Ammeter/ Voltmeter with 1.000 Set
selector switch, power factor meter, short circuit protection of main supply, thermal
over load protection, main supply voltage monitor short circuit protection relay,
selector switch auto / manual/off, indicating lamps, push button start / stop /
re-set etc.

97 Anti-Vibration mountings 1.000 Job


98 Exhaust pipe, fuel line and fuel tank should comply with latest 1.000 Set
cpcb , spcb norms
99 Spare parts for D.G. set as per engineer in charge direction 1.000 Set
100 Complete power wiring and earthing of D.G. set and AMF panel as per IER/PWD 1.000 Job
specification with necessary power and control cable, salt, charcoal, G.I. earth
electrodes, watering pipe, C.I. earth boxes and G.I. earth strip of adequate size

101 Construction of foundation of D.G. set and AMF panel as direction 1.000 Job
of engineer incharge

102 Installation of D.G. set and other accessories including 1.000 Job
commissioning and testing.
103 LOCAL CONTROL STATION

103.01 GSM/GPRS BASED REMOTE TERMINAL UNITS WITH Analog 2.000 Nos.
and Digital Parameter and features as specified to store and transmit data on GSM
backbone to MCS and should able to send & received SMS from registered mobile
parallel mode
103.02 GSM/GPRS based wireless communication hardware for RTUs capable to transfer 2.000 Nos.
data from remote site to MCS with all accessories and should able to send &
received SMS from
registered mobile parallel mode

103.03 Intelligent energy meters as per IS 16444 1.000 Nos.


103.04 Auto Phase reversal unit with inbuilt time delay & enclosure 1.000 Nos.
(confirms to IEC: 60947-1& IEC:60947-6-1) of rating 630 Amp
103.05 Complete cabling for all pumps as per direction of engineer 2.000 Set
incharge
103.06 Security Survelliance IP Camera 2.000 Nos.
103.07 Installation, commissioning & testing 1.000 Job
104 STRENGTHENING OF EXISTING Nagariya Nala 3.000 Set
Pumping Plant confirming to IS 5600 of approved make
Non clog, single stage, bottom suction submersible sewage pump suitable for
handling raw sewage of specific gravity
1.03 driven by submersible electric motor suitable for operation on 415 ± 6 % volt, 3
phase, 50 Hz, AC supply system along with 20 mtr. submersible cable and having
following specification- Capacity - 125 LPS RPM - 1000
MOC- Casing - 2% NiCi Impeller - CF 8 M Shaft - AISI 410

105 Accessories of each submersible pumping plant 3.000 Set


(a) Pedestal with autocoupling (SS)
(b) S.S. guide pipe approx
(c) S.S. chain with shackles approx
(d) C.I.D.F, bend 250 mm dia x 900

106 Starter of approve make confirming to IS /IEC 60947 3.000 Nos


SOFT starter suitable for operation on 415 ± 6 % volt, 3 Phase, 50Hz, AC supply
suitable for starting and running of electric motor and 8 to 12 starts and stops per Hr.

107 Pumping Plant of approve make confirming to IS 5600 2.000 Set


Non clog, single stage, bottom suction submersible sewage pump suitable for
handling raw sewage of specific gravity
1.03 driven by submersible electric motor suitable for operation on 415 ± 6 % volt, 3
phase, 50 Hz, AC supply system along with 20 mtr. submersible cable and having
following specification- Capacity - 70 LPS RPM - 1500
MOC- Casing - 2% NiCi Impeller - CF 8 M Shaft - AISI 410

108 Accessories of each submersible pumping plant 2.000 Set


(a) Pedestal with autocoupling (SS)
(b) S.S. guide pipe approx
(c) S.S. chain with shackles approx
(d) C.I.D.F, bend 200 mm dia x 900

109 Starter of approve make confirming to IS /IEC 60947 2.000 Nos


SOFT starter suitable for operation on 415 ± 6 % volt, 3 Phase, 50Hz, AC supply
suitable for starting and running of electric motor and 8 to 12 starts and stops per Hr.

110 Main pipes , valves and specials


110.01 (A) Moter operated C.I.D.F. rising spindle type, sluice valve with 3.000 Nos
actuators conforming to IS : 14846 suitable for sewage application 300 mm dia size

110.02 (A) Moter operated C.I.D.F. rising spindle type, sluice valve with 2.000 Nos
actuators conforming to IS : 14846 suitable for sewage application 200 mm dia size

110.03 (C) C.I.D.F. Reflex valve conforming to IS: 5312 suitable for 3.000 Nos
sewage applicable 300 mm dia size
110.04 (C) C.I.D.F. Reflex valve conforming to IS: 5312 suitable for 2.000 Nos
sewage applicable 200 mm dia size
110.05 (D) C.I.D.F. rising spindle type, sluice valve with actuators 1.000 Nos
conforming to IS : 14846 suitable for sewage application 350 mm dia size

110.06 (E) C.I.D.F. dismantling joint 300 mm dia size 3.000 Nos
110.07 (E) C.I.D.F. dismantling joint 200 mm dia size 2.000 Nos
110.08 (F) C.I.D.F. dismantling joint 350 mm dia size 2.000 Nos
110.09 C.I. pipes and specials - 5.000 Job
Dismantaling and required replacement of old Main piping Including Common Header
bend foundation padestal
,Complete job
110.1 (G) C.I. pipes and specials - 1.000 Job
(i) C.I.D.F. Enlarge 200 mm x 300 mm dia
(ii) C.I.D.F. pipe 300 mm dia
(iii) C.I.D.F. pipe 350 mm dia
(iv) C.I.D.F.90 bend 300 mm dia
(v) C.I.A.F. pipe Tee 350 mm x 350 mm x 300/200 mm dia
(vi) C.I. blind flange 350 mm dia

110.11 (H) Necessary MS, Nut-Bolt and washer for complete and proper installation of piping 1.000 Job
arrangement and pumps as per direction of
engineer incharge

110.12 I) Necessary SS Nut-Bolt and washer for complete and proper installation of piping 1.000 Job
arrangement and pumps as per direction of
engineer in charge

110.13 (J) Necessary rubber packing of suitable size 300mm,200 mm and 350 mm for 2.000 Lot
complete and proper installation of piping arrangement and pumps as per direction
of engineer in charge
111 0.415 KV L.T. control panel for pumping plant 1.000 Set
L.T. control panel having 2 Nos. incoming and 5Nos. outgoing panels suitable to
operated on 415 ± 6 % volt , 3 Phase , 50 Hz, AC supply as per details given below
or as per design approved by engineer-
(A) 2 Nos incoming panels (1 No. for D.G. set and 1 No. for power supply from LT
End) each consisting of following items -
(i) 630 amp ACB - 1 No., (ii) C.Ts of suitable ratio - 1 No., (iii) Ammeter with selector
switch - 1 No.
(iv) Voltmeter with selector switch - 1 No., (v) Power factor meter(0.5 Lag&0.5Lead) -
1 No.
(vi) Frequency meter - 1 No., (vii) KWH meter - 1 No.,
(viii) 2 Pole over current relay& one pole earth fault relay - 1 No.
(B) Bus bar chamber having 3 Nos. bus bars for phase and 1 No. bus bar for neutral
of suitable size – 1 No
(C) 6 Nos. composite panels for pumping plants, each consisting of following items –
(i) 630 amp MCCB/ACB – 1 No., (ii)C.Ts. of suitable ratio - 1 No., (iii)Ammeter with
selector switch - 1 No.
(iv) Power capacitor controlled by main switch of suitable rating - 1 No.
(v) Thermal over load protection - 1 No., (vi)Reverse rotation trip device - 1 No.
(vii) Automatic start / stop device according to level in the sump - 1 No.
(viii) Indicating lamps(Auto/manual/low level/ reverse rotation) - 1 Set
(D) 2 Nos. outgoing panels for miscellaneous works, each consisting of following
items –
(i) MCCB of 100 amp capacity - 1 No., (ii)C.Ts. of suitable ratio - 1 No.,
(iii) Ammeter with selector switch - 1 No., (iv) Indicating lamps. –

112 Mono rail traveling trolley with actuator operated chain pulley block should confirm to 1.000 Set
IS 3938
Actuator operated Mono rail traveling trolley with chain pulley block of 5 Ton capacity
having 6 mtr. lift complete with hand chain
for installation of pumping plants

113 Sewage level regulator/controller 1.000 Set


Ultrasonic level regulator/ controller for measuring sewage level in the sump suitable
for indication of low and high level in mtrs.

114 Pressure TRANCMITTER 6.000 Set


pressure gauge complete with necessary Cu. tubing, stop cock and necessary fittings
suitable for sewage applicable
115 Power and control cable should confirm to IS 694 100.000 M
The 400 sqmm 3.5 core size of cables required for power wiring from L.T. panel of
sub station to L.T. panel of pump house
116 The 120 sqmm 3.5 core size of cables required for power wiring 125.000 M
from L.T. panel of pump house to starters
117 Earthing confirming to IS 3043 1.000 Job
Double earthing of all electrical equipments as per latest IER/PWD specification
complete with salt, charcoal, G.I. earth electrodes, watering pipe, C.I. earth boxes
and G.I. earth strips of adequate size.

118 Construction of foundation for pumping plants, starters and panels. 1.000 Job
119 Installation of pumping plants and all related equipments at site. 1.000 Job
As per direction of engineer incharge

120 Commissioning of all pumping plants and related equipments at 1.000 Job
site.

121 Painting of all equipments 1.000 Job


122 Internal and external electrification of pump house, sub-station 1.000 Job
room and campus.
123 Spares 1.000 Set
provision of spare pump set as per CPHEEO mannual to have 100
% stand by of peak flow

124 Tools & Plants: 1.000 Lot


Supply of Tools
(i) HT Megger- 1 no.
(ii) LT Megger- 1 no.
(iii) Hydraulic crimping tool- 1 no.
(iv) Manual crimping tool- 1 no.
(v) Clamp multimeter- 1 no.
(vi) Chain wrench
(vii) Pipe wrench
(viii) Screw wrench
(ix) Ring spanners
(x) Double ended spanners
(xi) Insulated pliers
(xii) Hammer with handle
(xiii) Hexa blade frame
(xiv) Measuring tape of different size
(xv) Sprit level set
(xvi) Filler gauge
(xvii) Chisel (150, 200mm)
(xviii) File (Flat, half round, round and triangular) (xix)Power Drill
(xx) Other Tools as specified

125 (i) Providing, Installation, Testing and commissioning of 350 mm ELECTRO 1.000 Set
MAGNETIC FLOW METER cum totalizer having following charecteristics/MOC:
Liner: Polyurethane or Hard Rubber / Electrode MOC: SS316L /Housing : Die Cast
Aluminium or CS / Power Supply: 90-230 V AC / Output: 4-20mA with HART / Sensor
Cable : 10 mt / Flow Tube or Sensor housing protection IP68 / Process Flange :
SS316 / Display : 3 1/2 LCD Display / Cable Connection :
1/2"NPT /Accuracy : 0.5%

126 CVT with control cables above flow meter 1.000 Job
127 Mini tubewell for campus water requirement complete in all 1.000 Job
respect
128 Pole mounted Solor LED 1*18W Street lighting Fixture Installation 6.000 Job

129 Provision of rubber matting /resistance sheet confirming to IS 1.000 Job


15652
130 Provision of sefty equipment as per direction of engineer incharge 1.000 Job

131 Dredging pump with 15 Meter hose pipe ,panel/starter ,cable 1.000 Set
complete
132 Exhaust fans of suitable capacity 4.000 Nos
133 Manual bar Screen 1.000 Nos
Provision of CR Steel(SS 316) manual coarse bar screen having clear gap between
screen bar- 50 mm, size of flat shall be 50mm x 10mm angle of installation 70º .
Complete

134 Mechanical Bar Screen should confirm to IS 6280 2.000 Nos


Provision of Stainless Steel (SS 316) mechanical bar screen having clear gap
between screen bar- 30 mm, size of SS flat shall be as per actual site requirement
angle of installation - 70º duly followed with dismantling of existing manual screen
and installation of mechanical screen including all necesary civil work required for
proper completion of work , conveyer system, electric motor, starter, cable, panel,
bins etc.

135 Sluice Gate


135.01 Provision of CI Thimble Mounted Sluice Gate with motor, actuator operated, Rising 1.000 Nos
Spindle type. Sluice gates are as per IS 13349 Including all taxes, Freight, loading,
unloading, fitting in position including Sluice gates are upward opening wall thimble
mounted suitable for isolating the flow of sewer into out of the opening in the wall. It
consists Gate frame, wall thimble, gate slide, shutter, seating/sealing faces .The
gates will be provided with pads on sides, top and bottom to mount the wedges. The
gate shall be designed in such a manner, so that it can be operated at 2 meter head.
Gate frame & Shutter of CI Grade IS 210 FG 260, Head Stock assembly bolts & SS
ASTM A276 Type316, Stem, Operating Nut SS ASTM A276 Type 316., Duly tested
for tensile strength, Tested for over all dimensions as per
approved GA drawing complete in all respect as per specification and direction of
Engineer, For by pass

135.02 Provision of CI Thimble Mounted Sluice Gate with motor, actuator operated, Rising 4.000 Nos
Spindle type. Sluice gates are as per IS 13349 Including all taxes, Freight, loading,
unloading, fitting in position including Sluice gates are upward opening wall thimble
mounted suitable for isolating the flow of sewer into out of the opening in the wall. It
consists Gate frame, wall thimble, gate slide, shutter, seating/sealing faces .The
gates will be provided with pads on sides, top and bottom to mount the wedges. The
gate shall be designed in such a manner, so that it can be operated at 2 meter head.
Gate frame & Shutter of CI Grade IS 210 FG 260, Head Stock assembly bolts & SS
ASTM A276 Type316, Stem, Operating Nut SS ASTM A276 Type 316., Duly tested
for tensile strength, Tested for over all dimensions as per
approved GA drawing complete in all respect as per specification and direction of
Engineer, For screen channels

136 Installation & Commissioning 1.000 Job


Installation & commissioning of all screens and sluice gates complete.

137 Supply of silent type DG set , engine ,alternator as per ISO 8528 capable of 2.000 Set
developing 200 KVA at 415+6% ,50Hz AC at.85 P.F. lagging and self exciting coupled
with suitable BHPdiesel engine through flexible coupling and mounted on common
base plate complete with fuel tank inside the acousting system and inbuilt control
panel 12 volt lead acide Battery with lead silencer manual control panel & AVM pads
D.G. set shall be mounted in open sky resting on the foundation as per the design .
DG set should confirm to latest norms of CPCB , SPCB

138 Suitable AMF panel floor mounting type comprising of Ammeter/ Voltmeter with 2.000 Set
selector switch, power factor meter, short circuit protection of main supply, thermal
over load protection, main supply voltage monitor short circuit protection relay,
selector switch auto / manual/off, indicating lamps, push button start / stop / re-set
etc. confirming to IS - 2147

139 Synchronising panel /Bus coupler comprising of synchono scop, 1.000 Set
Frequency meter ,voltmeter etc

140 Anti-Vibration mountings 1.000 Job


141 Exhaust pipe, fuel line and fuel tank should comply with latest 2.000 Set
cpcb , spcb norms
142 Spare parts for D.G. set as per engineer in charge direction 1.000 Set
143 Complete power wiring and earthing of D.G. set and AMF panel as per IER/PWD 1.000 Job
specification with necessary power and control cable, salt, charcoal, G.I. earth
electrodes, watering pipe, C.I. earth boxes and G.I. earth strip of adequate size

144 Construction of foundation of D.G. set and AMF panel as direction 1.000 Job
of engineer incharge

145 Installation of D.G. set and other accessories including commissioning and testing as 1.000 Job
per direction of engineer incharge

146 Construction of Sub-Station


146.01 (A) 11 KV floor mounting, single row type H.T. panel having 1 No. incoming and 2 1.000 Set
Nos. outgoing VCB of suitable
rating/SF-6 panels complete with insulated bus bars, earthing and
all necessary metering and safety equipments.

146.02 (A) 0.415 KV L.T. control panel for Substation 1.000 Nos
L.T. control panel having 2 Nos. incoming and 1 Nos. outgoing panels suitable to
operated on 415 ± 6 % volt , 3 Phase , 50 Hz, AC supply ,with C.Ts, AVF
Meter,KWH meter P.F Meter, Bus Bar chamber, Relays and other Protective Devices
Complete in all Respects.

146.03 (B) Supply, Installation, Testing and commissioning of copper wound ISI marked 2.000 Nos
Transformer 11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type with Standard
accessories like, conservator, Silicagel breather, radiator, fins, HT & LT cable end
boxes or Bus Duct flange, Lifting lugs, Bi-directional Plain / Flanged Rollers,Earthing
terminal,Air relaese plug, Off load tap changer (+5% to -10% in steps of 2.5%),
winding / Top oil temperature rise of 45°C/40°C, ISI marked drain valves, Dial type
temperature gauge, first fill oil, Epoxy based paint etc conforming to IS 2026 (Part- I
to Part - II), latest ammended and IS 1180 Part-I : 2014 BEE star level - I as per Govt.
of India, Ministry of power notification Dated 16th Dec., 2016. Transformers described
as above and as per the following continuous rating: 400kVA

146.04 (C) 11 KV XLPE cable of 3.5 x 120 sqmm size Al. armoured 90.000 M
cable
146.05 (D) Cable Jointing Kit 2.000 Nos
(i) H.T. indoor type
146.06 (ii) H.T. outgoing type 2.000 Nos
146.07 (iii) L.T. indoor type 10.000 Nos
146.08 (F) Double earthing of all sub-station equipments complete with salt, charcoal, G.I. 4.000 Pits
earth electrode, C.I. earth boxes,
G.I. watering pipe, G.I. earth strip of adequate capacity and labour.

146.09 (G) Erection and commissioning of all sub-station equipments 1.000 Job

146.11 (I) Construction of foundations of Transformers and panels as 1.000 Job


per direction of engineer incharge

146.12 (J) Fencing around outdoor Transformers as per direction of 1.000 Job
engineer incharge
147 LOCAL CONTROL STATION 2.000 Nos
GSM/GPRS BASED REMOTE TERMINAL UNITS WITH Analog
and Digital Parameter and features as specified to store and transmit data on GSM
backbone to MCS and should able to send & received SMS from registered mobile parallel
mode

147.01 GSM/GPRS based wireless communication hardware for RTUs capable to transfer data from 2.000 Nos
remote site to MCS with all accessories
and should able to send & received SMS from registered mobile parallel mode

147.02 Intelligent energy meters as per IS 16444 1.000 Nos


147.03 Auto Phase reversal unit with inbuilt time delay & enclosure (confirms to 1.000 Nos
IEC: 60947-1& IEC:60947-6-1) of rating 630 Amp

147.04 Complete cabling for all pumps as per direction of engineer incharge 2.000 Set

148 STRENGTHENING OF EXISTING Pata Nala 3.000 Set


Pumping Plant of approve make should confirm with IS 5600- Non clog, single
stage, bottom suction submersible sewage pump suitable for handling raw sewage of
specific gravity
1.03 driven by submersible electric motor suitable for operation on 415 ± 6 % volt, 3
phase, 50 Hz, AC supply system along with 20 mtr. submersible cable and having
following specification- Capacity - 220 LPS RPM - 1000
MOC- Casing - 2% NiCi Impeller - CF 8 M Shaft - AISI 410

149 Accessories of each submersible pumping plant 3.000 Set


(a) Pedestal with autocoupling (SS)
(b) S.S. guide pipe approx
(c) S.S. chain with shackles approx
(d) C.I.D.F, bend 250 mm dia x 900
150 Starter of approve make should confirm with IS/IEC 60947 SOFT starter suitable 3.000 Nos
for operation on 415 ± 6 % volt, 3 Phase, 50Hz, AC supply suitable for starting and
running of electric motor and 8 to 12 starts and stops per Hr.

151 Pumping Plant of approve make should confirm with IS 5600 Non clog, single 2.000 Set
stage, bottom suction submersible sewage pump suitable for handling raw sewage of
specific gravity
1.03 driven by submersible electric motor suitable for operation on 415 ± 6 % volt, 3
phase, 50 Hz, AC supply system along with 20 mtr. submersible cable and having
following specification- Capacity - 110 LPS RPM - 1500
MOC- Casing - 2% NiCi Impeller - CF 8 M Shaft - AISI 410

152 Accessories of each submersible pumping plant 2.000 Set


(a) Pedestal with autocoupling (SS)
(b) S.S. guide pipe approx
(c) S.S. chain with shackles approx
(d) C.I.D.F, bend 200 mm dia x 900

153 Starter of approve make should confirm with IS/IEC 60947 SOFT starter suitable for 2.000 Nos
operation on 415 ± 6 % volt, 3 Phase,
50Hz, AC supply suitable for starting and running of electric motor
and 8 to 12 starts and stops per Hr.

154 Main pipes , valves and specials


154.01 (A) Moter operated actuator suitable for 350 mm dia size sluice 3.000 Nos
valve

154.02 (B) Moter operated actuator suitable for 250 mm dia size sluice 2.000 Nos
valve

154.03 Motor operated spindle type sluice valve for 500 mm dia. size 1.000 Nos
sluice valve
154.04 (E) C.I.D.F. dismantling joint 350 mm dia size 3.000 Nos
154.05 (E) C.I.D.F. dismantling joint 250 mm dia size 2.000 Nos
154.06 (F) C.I.D.F. dismantling joint 500 mm dia size 2.000 Nos
154.07 C.I. pipes and specials - 1.000 Job
Dismantaling and required replacement of old Main piping Including Common Header
bend foundation padestal
,Complete job

154.08 (G) C.I. pipes and specials - 1.000 job


(v) C.I.A.F. pipe Tee 350 mm x 350 mm x 300/250 mm dia
(vi) C.I. blind flange 500 mm dia

154.09 (H) Necessary MS, Nut-Bolt and washer for complete and proper 1.000 job
installation of piping arrangement and pumps as per direction of engineer incharge

154.1 (I) Necessary SS Nut-Bolt and washer for complete and proper installation of piping 1.000 job
arrangement and pumps as per direction of
engineer incharge

154.11 (J) Necessary rubber packing of suitable size 300mm,200 mm and 350 mm for 1.000 Lot
complete and proper installation of piping arrangement and pumps as per direction
of engineer in charge
155 0.415 KV L.T. control panel for pumping plant 1.000 Set
L.T. control panel having 2 Nos. incoming and 7 Nos. outgoing panels suitable to
operated on 415 ± 6 % volt , 3 Phase , 50 Hz, AC supply as per details given below
or as per design approved by engineer-
(A) 2 Nos incoming panels (1 No. for D.G. set and 1 No. for power supply from LT
End) each consisting of following items -
(i) 630 amp ACB - 1 No., (ii) C.Ts of suitable ratio - 1 No., (iii) Ammeter with selector
switch - 1 No.
(iv) Voltmeter with selector switch - 1 No., (v) Power factor meter(0.5 Lag&0.5Lead) -
1 No.
(vi) Frequency meter - 1 No., (vii) KWH meter - 1 No.,
(viii) 2 Pole over current relay& one pole earth fault relay - 1 No.
(B) Bus bar chamber having 3 Nos. bus bars for phase and 1 No. bus bar for neutral
of suitable size – 1 No
(C) 6 Nos. composite panels for pumping plants, each consisting of following items –
(i) 630 amp MCCB/ACB – 1 No., (ii)C.Ts. of suitable ratio - 1 No., (iii)Ammeter with
selector switch - 1 No.
(iv) Power capacitor controlled by main switch of suitable rating - 1 No.
(v) Thermal over load protection - 1 No., (vi)Reverse rotation trip device - 1 No.
(vii) Automatic start / stop device according to level in the sump - 1 No.
(viii) Indicating lamps(Auto/manual/low level/ reverse rotation) - 1 Set
(D) 2 Nos. outgoing panels for miscellaneous works, each consisting of following
items –
(i) MCCB of 100 amp capacity - 1 No., (ii)C.Ts. of suitable ratio - 1 No.,
(iii) Ammeter with selector switch - 1 No., (iv) Indicating lamps. –

156 Mono rail traveling trolley with actuator operated chain pulley block IS 3177 1.000 Set
Actuator operated Mono rail traveling trolley with chain pulley block of 5 Ton capacity
having 6 mtr. lift complete with hand chain
for installation of pumping plants

157 Sewage level regulator/controller 1.000 Set


Ultrasonic level regulator/ controller for measuring sewage level in the sump suitable
for indication of low and high level in mtrs.

158 Pressure TRANCMITTER 6.000 Set


pressure gauge complete with necessary Cu. tubing, stop cock and necessary fittings
suitable for sewage applicable
159 Power and control cable should confirm to IS 694 100.000 M
The 400 sqmm 3.5 core size of cables or as per design approved by engineer
required for power wiring from L.T. panel of sub station to L.T. panel of pump house

160 The 120 sqmm 3.5 core size of cables or as per design approved by engineer 125.000 M
required for power wiring from L.T. panel
of pump house to starters
161 Earthing should confirm to IS 3043 1.000 Job
Double earthing of all electrical equipments as per latest IER/PWD specification
complete with salt, charcoal, G.I. earth electrodes, watering pipe, C.I. earth boxes
and G.I. earth strips of adequate
size.

162 Construction of foundation for pumping plants, starters and panels. 1.000 Job
As per direction of engineer incharge

163 Installation of pumping plants and all related equipments at site. 1.000 Job
As per direction of engineer incharge

164 Painting of all equipments 1.000 Job


165 Internal and external electrification of pump house, sub-station 1.000 Job
room and campus.
166 Spares 1.000 Set
provision of spare pump set as per CPHEEO mannual to have 100
% stand by of peak flow
167 Tools & Plants: 1.000 Lot
Supply of Tools
(i) HT Megger- 1 no.
(ii) LT Megger- 1 no.
(iii) Hydraulic crimping tool- 1 no.
(iv) Manual crimping tool- 1 no.
(v) Clamp multimeter- 1 no.
(vi) Chain wrench
(vii) Pipe wrench
(viii) Screw wrench
(ix) Ring spanners
(x) Double ended spanners
(xi) Insulated pliers
(xii) Hammer with handle
(xiii) Hexa blade frame
(xiv) Measuring tape of different size
(xv) Sprit level set
(xvi) Filler gauge
(xvii) Chisel (150, 200mm)
(xviii) File (Flat, half round, round and triangular) (xix)Power Drill
(xx) Other Tools as specified

168 (i) Providing, Installation, Testing and commissioning of 500 mm ELECTRO 1.000 Set
MAGNETIC FLOW METER cum totalizer having following charecteristics/MOC:
Liner: Polyurethane or Hard Rubber / Electrode MOC: SS316L /Housing : Die Cast
Aluminium or CS / Power Supply: 90-230 V AC / Output: 4-20mA with HART / Sensor
Cable : 10 mt / Flow Tube or Sensor housing protection IP68 / Process Flange :
SS316 / Display : 3 1/2 LCD Display / Cable Connection :
1/2"NPT /Accuracy : 0.5%

169 CVT with control cables above flow meter 1.000 Job
170 Mini tubewell for campus water requirement complete in all 1.000 Job
respect
171 Pole mounted Solor LED 1*18W Street lighting Fixture Installation 6.000 Job

172 Provision of rubber matting /resistance sheet confirming to IS 1.000 Job


15652
173 Provision of sefty equipment as per direction of engineer incharge 1.000 Job

174 Dredging pump with 15 Meter hose pipe ,panel/starter ,cable 1.000 Set
complete
175 Exhaust fans of suitable capacity 4.000 Nos
176 Manual bar Screen 1.000 Nos
Provision of CR Steel(SS 316) manual coarse bar screen having clear gap between
screen bar- 50 mm, size of flat shall be 50mm x 10mm angle of installation 70º .
Complete

177 Mechanical Bar Screen 2.000 Nos


Provision of Stainless Steel (SS 316) mechanical bar screen having clear gap
between screen bar- 30 mm, size of SS flat shall be as per actual site requirement,
angle of installation - 70º duly followed with dismantling of existing manual screen
and installation of mechanical screen including all necessary civil works required for
proper completion of work,sensors, conveyer system, electric motor, starter, cable,
panel, bins etc.

178 Sluice Gate


178.01 Provision of CI Thimble Mounted Sluice Gate with motor, actuator operated, Rising 1.000 Nos
Spindle type. Sluice gates are as per IS 13349 Including all taxes, Freight, loading,
unloading, fitting in position including Sluice gates are upward opening wall thimble
mounted suitable for isolating the flow of sewer into out of the opening in the wall. It
consists Gate frame, wall thimble, gate slide, shutter, seating/sealing faces .The
gates will be provided with pads on sides, top and bottom to mount the wedges. The
gate shall be designed in such a manner, so that it can be operated at 2 meter head.
Gate frame & Shutter of CI Grade IS 210 FG 260, Head Stock assembly bolts & SS
ASTM A276 Type316, Stem, Operating Nut SS ASTM A276 Type 316., Duly tested
for tensile strength, Tested for over all dimensions as per
approved GA drawing complete in all respect as per specification and direction of
Engineer, For by pass
178.02 Provision of CI Thimble Mounted Sluice Gate with motor, actuator operated, Rising 4.000 Nos
Spindle type. Sluice gates are as per IS 13349 Including all taxes, Freight, loading,
unloading, fitting in position including Sluice gates are upward opening wall thimble
mounted suitable for isolating the flow of sewer into out of the opening in the wall. It
consists Gate frame, wall thimble, gate slide, shutter, seating/sealing faces .The
gates will be provided with pads on sides, top and bottom to mount the wedges. The
gate shall be designed in such a manner, so that it can be operated at 2 meter head.
Gate frame & Shutter of CI Grade IS 210 FG 260, Head Stock assembly bolts & SS
ASTM A276 Type316, Stem, Operating Nut SS ASTM A276 Type 316., Duly tested
for tensile strength, Tested for over all dimensions as per
approved GA drawing complete in all respect as per specification and direction of
Engineer, For screen channels

179 Installation & Commissioning 1.000 Job


Installation & commissioning of all screens and sluice gates complete.

180 Shifting of DG sets from sarkata nala to patanala ,installation of dg 2.000 Set
sets ,servicing of DG sets.

181 Suitable AMF panel floor mounting type comprising of Ammeter/ Voltmeter with 2.000 Set
selector switch, power factor meter,
short circuit protection of main supply, thermal over load protection, main supply
voltage monitor short circuit protection relay, selector switch auto / manual/off,
indicating lamps, push button start / stop / re-set etc.

182 Synchronising panel /Bus coupler comprising of synchono scop, 1.000 Set
Frequency meter ,voltmeter etc

183 Installation of Anti-Vibration mountings as per direction of engineer 1.000 Job


incharge

184 Exhaust pipe, fuel line and fuel tank should comply with latest 2.000 Set
cpcb , spcb norms
185 Spare parts for D.G. set as per engineer in charge direction 1.000 Set
186 Complete power wiring and earthing of D.G. set and AMF panel as per IER/PWD 1.000 Job
specification with necessary power
and control cable, salt, charcoal, G.I. earth electrodes, watering pipe, C.I. earth boxes
and G.I. earth strip of adequate size

187 Construction of foundation of D.G. set and AMF panel as direction 1.000 Job
of engineer incharge

188 Installation of D.G. set and other accessories including commissioning and testing as 1.000 Job
per direction of engineer incharge

189 Construction of Sub-Station


189.01 (A) 11 KV floor mounting, single row type H.T. panel having 1 No. incoming and 2 1.000 Set
Nos. outgoing VCB of suitable
rating/SF-6 panels complete with insulated bus bars, earthing and
all necessary metering and safety equipments.

189.02 (A) 0.415 KV L.T. control panel for Substation 1.000 Nos
L.T. control panel having 2 Nos. incoming and 1 Nos. outgoing panels suitable to
operated on 415 ± 6 % volt , 3 Phase , 50 Hz, AC supply ,with C.Ts, AVF
Meter,KWH meter P.F Meter, Bus Bar chamber, Relays and other Protective Devices
Complete in all
Respects.

189.03 (B) Supply, Installation, Testing and commissioning of copper wound ISI marked 2.000 Nos
Transformer 11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type with Standard
accessories like, conservator, Silicagel breather, radiator, fins, HT & LT cable end
boxes or Bus Duct flange, Lifting lugs, Bi-directional Plain / Flanged Rollers,Earthing
terminal,Air relaese plug, Off load tap changer (+5% to -10% in steps of 2.5%),
winding / Top oil temperature rise of 45°C/40°C, ISI marked drain valves, Dial type
temperature gauge, first fill oil, Epoxy based paint etc conforming to IS 2026 (Part- I
to Part - II), latest ammended and IS 1180 Part-I : 2014 BEE star level - I as per Govt.
of India, Ministry of power notification Dated 16th Dec., 2016. Transformers described
as above and as per the following continuous rating: 400kVA
189.04 (C) 11 KV XLPE cable of 3.5 x 120 sqmm size Al. armoured 90.000 M
cable
189.05 (D) Cable Jointing Kit 2.000 Nos
(i) H.T. indoor type
189.06 (ii) H.T. outgoing type 2.000 Nos
189.07 (iii) L.T. indoor type 10.000 Nos
189.08 Double earthing of all sub-station equipments complete with salt, charcoal, G.I. earth 4.000 Pits
electrode, C.I. earth boxes, G.I.
watering pipe, G.I. earth strip of adequate capacity and labour.As
per IS 3043

189.09 (G) Erection and commissioning of all sub-station equipments 1.000 Job

189.11 (I) Construction of foundations of Transformers and panels as 1.000 Job


per direction of engineer incharge

189.12 (J) Fencing around outdoor Transformers as per direction of 1.000 Job
engineer incharge
190 LOCAL CONTROL STATION 2.000 Nos
GSM/GPRS BASED REMOTE TERMINAL UNITS WITH Analog
and Digital Parameter and features as specified to store and transmit data on GSM
backbone to MCS and should able to send & received SMS from registered mobile parallel
mode

190.01 GSM/GPRS based wireless communication hardware for RTUs capable to transfer data from 2.000 Nos
remote site to MCS with all accessories
and should able to send & received SMS from registered mobile parallel mode

190.02 Intelligent energy meters as IS 16444 1.000 Nos


190.03 Auto Phase reversal unit with inbuilt time delay & enclosure (confirms to 1.000 Nos
IEC: 60947-1& IEC:60947-6-1) of rating 630 Amp

190.04 Complete cabling for all pumps as per direction of engineer incharge 2.000 Set

191 S TRENGTHENING OF EXISTING Sarkata Nala 5.000 Set


P umping Plant of Approve make confirm to IS 5600
Non clog, single stage, bottom suction submersible sewage pump suitable for
handling raw sewage of specific gravity
1.03 driven by submersible electric motor suitable for operation on 415 ± 6 % volt, 3
phase, 50 Hz, AC supply system along with 20 mtr. submersible cable and having
following specification- Capacity - 230 LPS RPM - 1000
MOC- Casing - 2% NiCi Impeller - CF 8 M Shaft - AISI 410

192 Accessories of each submersible pumping plant 5.000 Set


(a) Pedestal with autocoupling (SS)
(b) S.S. guide pipe approx
(c) S.S. chain with shackles approx
(d) C.I.D.F, bend 250 mm dia x 900

193 Starter of approve make confirm to IEC/IS - 60947 5.000 Nos


SOFT starter suitable for operation on 415 ± 6 % volt, 3 Phase, 50Hz, AC supply
suitable for starting and running of electric motor and 8 to 12 starts and stops per Hr.

194 Main pipes , valves and specials


194.01 (A) Moter operated C.I.D.F. rising spindle type, sluice valve with actuators conforming 5.000 Nos
to IS : 14846 suitable for sewage application
400 mm dia size

194.02 Actuator for 800 mm dia sluice valve 1.000 Nos


194.03 (E) C.I.D.F. dismantling joint 400 mm dia size 5.000 Nos
194.04 (F) C.I.D.F. dismantling joint 800 mm dia size 2.000 Nos
194.05 C.I. pipes and specials - 1.000 Job
Dismantaling and required replacement of old Main piping Including Common Header
Complete job
194.06 (H) Necessary MS, Nut-Bolt and washer for complete and proper 1.000 job
installation of piping arrangement and pumps as per direction of engineer incharge

194.07 (I) Necessary SS Nut-Bolt and washer for complete and proper installation of piping 1.000 job
arrangement and pumps as per direction of
engineer incharge
194.08 (J) Necessary rubber packing of suitable size 300mm,200 mm and 350 mm for 1.000 Lot
complete and proper installation of piping arrangement and pumps as per direction
of engineer in charge
195 0.415 KV L.T. control panel for pumping plant 1.000 Set
L.T. control panel having 2 Nos. incoming and 7 Nos. outgoing panels suitable to
operated on 415 ± 6 % volt , 3 Phase , 50 Hz, AC supply as per details given below
or as per design approved by engineer-
(A) 2 Nos incoming panels (1 No. for D.G. set and 1 No. for power supply from LT
End) each consisting of following items -
(i) 630 amp ACB - 1 No., (ii) C.Ts of suitable ratio - 1 No., (iii) Ammeter with selector
switch - 1 No.
(iv) Voltmeter with selector switch - 1 No., (v) Power factor meter(0.5 Lag&0.5Lead) -
1 No.
(vi) Frequency meter - 1 No., (vii) KWH meter - 1 No.,
(viii) 2 Pole over current relay& one pole earth fault relay - 1 No.
(B) Bus bar chamber having 3 Nos. bus bars for phase and 1 No. bus bar for neutral
of suitable size – 1 No
(C) 6 Nos. composite panels for pumping plants, each consisting of following items –
(i) 630 amp MCCB/ACB – 1 No., (ii)C.Ts. of suitable ratio - 1 No., (iii)Ammeter with
selector switch - 1 No.
(iv) Power capacitor controlled by main switch of suitable rating - 1 No.
(v) Thermal over load protection - 1 No., (vi)Reverse rotation trip device - 1 No.
(vii) Automatic start / stop device according to level in the sump - 1 No.
(viii) Indicating lamps(Auto/manual/low level/ reverse rotation) - 1 Set
(D) 2 Nos. outgoing panels for miscellaneous works, each consisting of following
items –
(i) MCCB of 100 amp capacity - 1 No., (ii)C.Ts. of suitable ratio - 1 No.,
(iii) Ammeter with selector switch - 1 No., (iv) Indicating lamps. –

196 Mono rail traveling trolley with actuator operated chain pulley block confirm to 1.000 Set
IS 3177
Actuator operated Mono rail traveling trolley with chain pulley block of 5 Ton capacity
having 6 mtr. lift complete with hand chain
for installation of pumping plants

197 Sewage level regulator/controller 1.000 Set


Ultrasonic level regulator/ controller for measuring sewage level in the sump suitable
for indication of low and high level in mtrs.

198 Pressure TRANCMITTER 6.000 Set


pressure gauge complete with necessary Cu. tubing, stop cock and necessary fittings
suitable for sewage applicable
199 Power and control cable confirm to IS 694 100.000 M
The 400 sqmm 3.5 core size of cables or as per design approved by engineer
required for power wiring from L.T. panel of sub
station to L.T. panel of pump house

200 The 120 sqmm 3.5 core size of cables or as per design approved by engineer 125.000 M
required for power wiring from L.T. panel
of pump house to starters
201 Earthing 1.000 Job
Double earthing of all electrical equipments as per latest IER/PWD specification
complete with salt, charcoal, G.I. earth electrodes, watering pipe, C.I. earth boxes
and G.I. earth strips of adequate size.

202 Construction of foundation for pumping plants, starters and panels. 1.000 Job

203 Installation of pumping plants and all related equipments at site. 1.000 Job

204 Commissioning of all pumping plants and related equipments at 1.000 Job
site.

205 Painting of all equipments 1.000 Job


206 Internal and external electrification of pump house, sub-station 1.000 Job
room and campus.
207 Spares 1.000 Set
provision of spare pump set as per CPHEEO mannual to have 100
% stand by of peak flow

208 Tools & Plants: 1.000 Lot


Supply of Tools
(i) HT Megger- 1 no.
(ii) LT Megger- 1 no.
(iii) Hydraulic crimping tool- 1 no.
(iv) Manual crimping tool- 1 no.
(v) Clamp multimeter- 1 no.
(vi) Chain wrench
(vii) Pipe wrench
(viii) Screw wrench
(ix) Ring spanners
(x) Double ended spanners
(xi) Insulated pliers
(xii) Hammer with handle
(xiii) Hexa blade frame
(xiv) Measuring tape of different size
(xv) Sprit level set
(xvi) Filler gauge
(xvii) Chisel (150, 200mm)
(xviii) File (Flat, half round, round and triangular) (xix)Power Drill
(xx) Other Tools as specified

209 (i) Providing, Installation, Testing and commissioning of 800 mm ELECTRO 1.000 Set
MAGNETIC FLOW METER cum totalizer having following charecteristics/MOC:
Liner: Polyurethane or Hard Rubber / Electrode MOC: SS316L /Housing : Die Cast
Aluminium or CS / Power Supply: 90-230 V AC / Output: 4-20mA with HART / Sensor
Cable : 10 mt / Flow Tube or Sensor housing protection IP68 / Process Flange :
SS316 / Display : 3 1/2 LCD Display / Cable Connection :
1/2"NPT /Accuracy : 0.5%

210 CVT with control cables above flow meter 1.000 Job
211 Mini tubewell for campus water requirement complete in all 1.000 Job
respect
212 Pole mounted Solor LED 1*18W Street lighting Fixture Installation 6.000 Job

213 Provision of rubber matting /resistance sheet confirming to IS 1.000 Job


15652
214 Provision of safety equipment as per direction of engineer 1.000 Job
incharge
215 15 HP Dredging pump with 15 Meter hose pipe ,panel/starter 1.000 Set
,cable complete
216 Exhaust fans of suitable capacity 4.000 Nos
217 Manual bar Screen 1.000 Nos
Provision of CR Steel(SS 316) manual coarse bar screen having clear gap between
screen bar- 50 mm, size of flat shall be 50mm x 10mm angle of installation 70º .
Complete

218 Mechanical Bar Screen 2.000 Nos


Provision of Stainless Steel (SS 316) mechanical bar screen having clear gap
between screen bar- 30 mm, size of SS flat shall be as per actual site condition,
angle of installation - 70º duly followed dismentaling of existing manual screen and
installation of mechanical screen including all necessary civil work with conveyer
system, electric motor, starter, cable, panel, bins etc.

219 Sluice Gate


219.01 Provision of CI Thimble Mounted Sluice Gate with motor, actuator operated, Rising 2.000 Nos
Spindle type. Sluice gates are as per IS 13349 Including all taxes, Freight, loading,
unloading, fitting in position including Sluice gates are upward opening wall thimble
mounted suitable for isolating the flow of sewer into out of the opening in the wall. It
consists Gate frame, wall thimble, gate slide, shutter, seating/sealing faces .The
gates will be provided with pads on sides, top and bottom to mount the wedges. The
gate shall be designed in such a manner, so that it can be operated at 2 meter head.
Gate frame & Shutter of CI Grade IS 210 FG 260, Head Stock assembly bolts & SS
ASTM A276 Type316, Stem, Operating Nut SS ASTM A276 Type 316., Duly tested
for tensile strength, Tested for over all dimensions as per
approved GA drawing complete in all respect as per specification and direction of
Engineer, For by pass

219.02 Provision of CI Thimble Mounted Sluice Gate with motor, actuator operated, Rising 4.000 Nos
Spindle type. Sluice gates are as per IS 13349 Including all taxes, Freight, loading,
unloading, fitting in position including Sluice gates are upward opening wall thimble
mounted suitable for isolating the flow of sewer into out of the opening in the wall. It
consists Gate frame, wall thimble, gate slide, shutter, seating/sealing faces .The
gates will be provided with pads on sides, top and bottom to mount the wedges. The
gate shall be designed in such a manner, so that it can be operated at 2 meter head.
Gate frame & Shutter of CI Grade IS 210 FG 260, Head Stock assembly bolts & SS
ASTM A276 Type316, Stem, Operating Nut SS ASTM A276 Type 316., Duly tested
for tensile strength, Tested for over all dimensions as per
approved GA drawing complete in all respect as per specification and direction of
Engineer, For screen channels

220 Installation & Commissioning 1.000 Job


Installation & commissioning of all screens and sluice gates complete.

221 Shifting of DG sets from sarkata nala to patanala ,installation of dg 2.000 Set
sets ,servicing of DG sets.

222 Suitable AMF panel floor mounting type comprising of Ammeter/ Voltmeter with 2.000 Set
selector switch, power factor meter,
short circuit protection of main supply, thermal over load protection, main supply
voltage monitor short circuit protection relay, selector switch auto / manual/off,
indicating lamps, push button start / stop / re-set etc.

223 Synchronising panel /Bus coupler comprising of synchono scop, 1.000 Set
Frequency meter ,voltmeter etc

224 Anti-Vibration mountings 1.000 Job


225 supply Exhaust pipe, fuel line and fuel tank that should meet latest 2.000 Set
cpcb,upcb norms.

226 Spare parts for D.G. set as per engineer in charge direction 1.000 Set
227 Complete power wiring and earthing of D.G. set and AMF panel as per IER/PWD 1.000 Job
specification with necessary power and control cable, salt, charcoal, G.I. earth
electrodes, watering pipe, C.I. earth boxes and G.I. earth strip of adequate
size

228 Construction of foundation of D.G. set and AMF panel as direction 1.000 Job
of engineer incharge

229 Installation of D.G. set and other accessories including 1.000 Job
commissioning and testing
230 Construction of Sub-Station
230.01 (A) 11 KV floor mounting, single row type H.T. panel having 1 No. incoming and 2 1.000 Set
Nos. outgoing VCB of suitable
rating/SF-6 panels complete with insulated bus bars, earthing and
all necessary metering and safety equipments.
230.02 (A) 0.415 KV L.T. control panel for Substation 1.000 Nos
L.T. control panel having 2 Nos. incoming and 1 Nos. outgoing panels suitable to
operated on 415 ± 6 % volt , 3 Phase , 50 Hz, AC supply ,with C.Ts, AVF
Meter,KWH meter P.F Meter, Bus Bar chamber, Relays and other Protective Devices
Complete in all
Respects.

230.03 (B) Supply, Installation, Testing and commissioning of copper wound ISI marked 2.000 Nos
Transformer 11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type with Standard
accessories like, conservator, Silicagel breather, radiator, fins, HT & LT cable end
boxes or Bus Duct flange, Lifting lugs, Bi-directional Plain / Flanged Rollers,Earthing
terminal,Air relaese plug, Off load tap changer (+5% to -10% in steps of 2.5%),
winding / Top oil temperature rise of 45°C/40°C, ISI marked drain valves, Dial type
temperature gauge, first fill oil, Epoxy based paint etc conforming to IS 2026 (Part- I
to Part - II), latest ammended and IS 1180 Part-I : 2014 BEE star level - I as per Govt.
of India, Ministry of power notification Dated 16th Dec., 2016. Transformers described
as above and as per the following continuous rating: 400kVA

230.04 (C) 11 KV XLPE cable of 3.5 x 120 sqmm size Al. armoured 90.000 M
cable
230.05 (D) Cable Jointing Kit 2.000 Nos
(i) H.T. indoor type
230.06 (ii) H.T. outgoing type 2.000 Nos
230.07 (iii) L.T. indoor type 10.000 Nos
230.08 (F) Double earthing of all sub-station equipments complete with salt, charcoal, G.I. 4.000 Pits
earth electrode, C.I. earth boxes,
G.I. watering pipe, G.I. earth strip of adequate capacity and labour.

230.09 (G) Erection and commissioning of all sub-station equipments 1.000 Job

230.11 (I) Construction of foundations of Transformers and panels as 1.000 Job


per direction of engineer incharge

230.12 (J) Fencing around outdoor Transformers as per direction of 1.000 Job
engineer incharge
231 LOCAL CONTROL STATION 2.000 Nos
GSM/GPRS BASED REMOTE TERMINAL UNITS WITH Analog
and Digital Parameter and features as specified to store and transmit data on GSM
backbone to MCS and should able to send & received SMS from registered mobile parallel
mode

231.01 GSM/GPRS based wireless communication hardware for RTUs capable to transfer data from 2.000 Nos
remote site to MCS with all accessories
and should able to send & received SMS from registered mobile parallel mode

231.02 Intelligent energy meters 1.000 Nos


231.03 Auto Phase reversal unit with inbuilt time delay & enclosure (confirms to 1.000 Nos
IEC: 60947-1& IEC:60947-6-1) of rating 630 Amp

231.04 Complete cabling for all pumps as per direction of engineer incharge 2.000 Set

231.05 Security Survelliance IP Camera 2.000 Nos


232 STRENGTHENING OF EXISTING 42 MLD STP AT
DAULATGANJ
233 Replacement of 6 mm opening mechanical fine screen of 1M*1.8M*.566M with standard 4.000 Set
suitable parts with level sencer and hydrolic system.

234 Supply ,Installation of automated Switchgear panels of above 4.000 Nos


mechanichal screen
235 Replacement of 10 mm opening manual screen . 2.000 Nos
236 Turbo Air Blower with complete assembly of capacity 2300 m3/hr and 6.000 Set
.65kg/cm2 including Motor Coupling ,Cabling ,Lubricant etc suitable for drive above Blower

237 Starter for above blower (VFD/ATS/SOFT) 6.000 Nos


238 Construction of foundation of above Blower as per direction of engineer 6.000 Job
incharge
239 Supply ,Installation and commissioning of Slow Speed grit Separator Mechanism , Grit 4.000 Set
Classifier ,Organic Pump including gear
reduction and Motor should confirm to IS 6279 and as per direction of engineer incharge

240 Supply ,Installation and commissioning of Cleari Settler Mechanism including gear 4.000 Set
reduction ,Scrappers ,rubber part and Motor should confirm to latest IS and as per direction
of engineer incharge

241 upply ,Installation and commissioning of Sludge Thickner Mechanism including gear 2.000 Set
reduction and Motor should confirm to latest
IS and per direction of enginner in charge

242 Supply and fixing of Ultrasonic Flow meter . Locations of these flowmeter 2.000 Nos
will be decided as per direction of engineer incharge

243 Reorganizing of Air line distribution system of diffenrt size and length with required 1.000 Job
replacement of piping with draine valve and
pressure gauge .as per direction of engineer incharge

244 Supply ,Installation and commissioning of Air flow meter and pressure 2.000 Nos
gause.

245 Fab Aireation system by replecement of Diffusers and piping gride.in each FAB confirming to 8.000 Job
latest IS and as per direction of
engineer incharge

246 Supply ,Installation and commissioning of Screw type non cloge 3-5 % solid handlling capacity 4.000 each
motor pump set of having specification:
Discharge -45 m3/hr
head -15 m speed-400 rpm

247 upply ,installation and commissining of Automatic Chlorine Nutrilizing tank with suitable 1.000 set
blower piping alarm etc. for whole
plant.should confirm to latest IS and as per direction of engineer incharge

248 Supply ,installation and commissining of Automatic Chlorine Dosing 3.000 Each
pump with starter of suitable capacity .

249 Supply ,installation and commissining of Automatic Chlorine Dosing Arrangement having 2.000 Each
capacity upto 5 ppm suitable for
connecting with chlorine cylenders of capacity 1 Ton consisting of
vaccume regulator ,enjector etc.

250 upply ,Installation and commissioning of centrifuge capacity 12 m³/hr. for dewatering of 6.000 set
thickned (3-5% solid consistency)
domestic sludge with all required E&M works. For 42 MLD STP

251 Supply ,Installation and commissioning of centrifuge feed pump capacity 12 m³/hr. domestic 8.000 set
sludge with all required E&M works.
For 42 MLD STP

252 Replacement of main Switchgear panel including supply and fixing of all adjoint standerd 1.000 set
accessories ,labour and T&P as per
requirement

253 Installation of LED Type Lighting Fixtures with solar Panels, power backup 20.000 Nos
and Mounting Arrangements

254 Installation of Power Receptacles of capacity 63 Ampere at Different Locations for repairing 12.000 Nos
work with mounting arrangement.

255 Overhauling/Replecement and automation of Sluice Gate including Supply and Fixing of 24.000 NOS
Requirerd material ,all labour , T&P as per
site requirement.

256 Actuator for Sluice valve with required RTU ,Panel and cabling etc 24.000 set

257 Supply and fixing of Over flow Pump/Recyle Pump of 7.5 HP 2.000 LOT
258 Supply and fixing of Chlorine Booster Pump confirming to latest IS 3.000 LOT

259 Supply , installation of camera for campus as per direction of engineer 10.000 no
incharge
260 Replacement of Sludge sump air line and diffuser replacement as per 2.000 JOB
relevant IS and as per direction of engineer incharge

261 Supply , Installation of Sludge mixer 2.000 no


262 Replacement of Fab Media of 42 MLD STP Daulat ganj as per direction of 1.000 JOB
engineer incharge

263 MPS 56 MLD 1.000 JOB


Modification in existing Starter to operete automaticaly
264 Modification in existing LT panel by replacing realy and PLC based RTU supported MCCB 1.000 JOB
,breakers etc to operete automaticaly

265 Actuator for Sluice valve with required RTU and cabling 6.000 set
266 Control center with large vedio screen

267 level sensor for sump 1.000 set


268 modification and overhaling of existing substaion,4 nos transformers,HT panels , cabling etc 1.000 JOB
to operate automaticaly and
synchronizing the transformers.

269 modifiactin and overhaling of existing 4 nos DG sets,HT panels , cabling 1.000 JOB
etc to operate automaticaly and synchronizing .

270 Provision of Stainless Steel (SS 316) mechanical bar screen having clear gap between screen 2.000 SET
bar- 20 mm, size of SS flat shall be 50
mm x 10 mm, angle of installation - 70º duly followed with conveyer system, electric motor,
starter, cable, panel, bins Sluice gate etc. (for flow upto 36 MLD)

271 DO Analyser for all FAB and outlet of STP interconnected Automaticaly 9.000 Nos
with blowers

272 Inlet and outlet parameter analysers (4 parameter i.e. BOD,COD 3.000 Nos
,DO,TSS)

273 SCADA/PLC for whole 56 mld plant which is comprises following items:- 1.000 JOB
GSM/GPRS BASED REMOTE TERMINAL UNITS WITH Analog
and Digital Parameter and features as specified to store and transmit data on GSM
backbone to MCS and should able to send & received SMS from registered mobile parallel
mode
GSM/GPRS based wireless communication hardware for RTUs capable to transfer data from
remote site to MCS with all accessories and should able to send & received SMS from
registered mobile parallel mode Intelligent energy meters
Auto Phase reversal unit with inbuilt time delay & enclosure (confirms to IEC: 60947-1&
IEC:60947-6-1) of rating 630 Amp Installation, commissioning & testing
HP Compaq or Equivalent master control station hardware with latest configuration &
minimum PIV processor, 1 TB HDD , 4GB RAM 52 CDR/DVD , 70" plasma screen/large
vedio screen , mouse & key board. Make HP/HCL/Acer/ Equivalent
Full development version of SCADA software with unlimited digital & analog input/output
features specified in detailed technical document adequate with customization of software as
per requirement
GSM based wireless communication system for RTU capable to transfer & gather data
from remote sites to control stations. All accessories included with signal enhancer, antenna
spec. Already

274 APC or equivalent 0.5 KVA rating UPS 1.000 Nos


275 HP or equivalent 600 DPI ink Jet Colour Printer 1.000 Nos
276 HP or equivalent Laser printer 1018 or equivalent 1.000 Nos
277 camera for campus 10.000 Nos
278 Operation and Maintenance for 15 Years
278.01 Operation and Maintenance cost of Bairikala STP with all civil, electrical-
mechanical and instrumentation works, effluent channel, appurtment and
other allied works for 15 years as specified in tender document and as per
norms of CPHEEO manual on Sewerage and Sewage Treatment System-2013
(Bidder is required to quote the total O&M price for 15 years against this row
only and yearwise cost will be auto calculated based on the quoted rate) (The
rate shall include testing of influent, effluent by third party as per schedule
in tender document and daily tests in STP labs, including all
chemicals/glassware/supervisory staff/operating staff/up keeping of STP
campus/maintaining log books or other records/all necessary safety 1 Job
measures/CTO or any other scope as per maintenance schedule in tender document

278.02 1st year 1 Job 0.00


278.03 2nd year 1 Job 0.00
278.04 3rd year 1 Job 0.00
278.05 4th year 1 Job 0.00
278.06 5th year 1 Job 0.00
278.07 6th year 1 Job 0.00
278.08 7th year 1 Job 0.00
278.09 8th year 1 Job 0.00
278.10 9th year 1 Job 0.00
278.11 10th year 1 Job 0.00
278.12 11th year 1 Job 0.00
278.13 12th year 1 Job 0.00
278.14 13th year 1 Job 0.00
278.15 14th year 1 Job 0.00
278.16 15th year 1 Job 0.00
279 Electricity and fuel charges during O&M for 15 Years for
Barikala STP

279.01 Guaranteed Energy Consumption in (KwH/MLD) for 1 MLD


STP (Note:- The Bidder is required to enter Guaranteed Energy Consumption in
(KwH/MLD). The figure 45442.5 is shown in the quantity column, which is the
multiplication of 1 MLD- capacity of STP , 5475 days - the number of days over the
15 years, and Rs. 8.30 - the power unit rate. 45442.5=1*5475*8.30 is shown in the 45442.50 KwH/MLD
quantity column)

280 Operation and Maintenance for 15 Years


280.01 Operation and Maintenance cost of 1 mld Bairikala MPS with all civil, electrical-
mechanical and instrumentation works, effluent channel, appurtment and other
allied works for 15 years as specified in tender document and as per norms of
CPHEEO manual on Sewerage and Sewage Treatment System-2013 (Bidder is
required to quote the total O&M price for 15 years against this row only and
yearwise cost will be auto calculated based on the quoted rate) (The rate shall
include testing of influent, effluent by third party as per schedule in tender
document and daily tests in STP labs, including all
chemicals/glassware/supervisory staff/operating staff/up keeping of STP
campus/maintaining log books or other records/all necessary safety 1 Job
measures/CTO or any other scope as per maintenance schedule in tender document

280.02 1st year 1 Job 0.00


280.03 2nd year 1 Job 0.00
280.04 3rd year 1 Job 0.00
280.05 4th year 1 Job 0.00
280.06 5th year 1 Job 0.00
280.07 6th year 1 Job 0.00
280.08 7th year 1 Job 0.00
280.09 8th year 1 Job 0.00
280.10 9th year 1 Job 0.00
280.11 10th year 1 Job 0.00
280.12 11th year 1 Job 0.00
280.13 12th year 1 Job 0.00
280.14 13th year 1 Job 0.00
280.15 14th year 1 Job 0.00
280.16 15th year 1 Job 0.00
280.17 Electricity and fuel charges during O&M for 15 Years for
Barikala MPS

280.18 Guaranteed Energy Consumption in (KwH/MLD) for 1 MLD


MPS (Note:- The Bidder is required to enter Guaranteed Energy Consumption in
(KwH/MLD). The figure 45442.5 is shown in the quantity column, which is the
multiplication of 1 MLD- capacity of STP , 5475 days - the number of days over the
15 years, and Rs. 8.30 - the power unit rate. 45442.5=1*5475*8.30 is shown in the 45442.50 KwH/MLD
quantity column)

281.01 Operation and Maintenance cost of 39 mld STP Daulatganj with all civil, electrical-
mechanical and instrumentation works, effluent channel, appurtment and other
allied works for 15 years as specified in tender document and as per norms of
CPHEEO manual on Sewerage and Sewage Treatment System-2013 (Bidder is
required to quote the total O&M price for 15 years against this row only and
yearwise cost will be auto calculated based on the quoted rate) (The rate shall
include testing of influent, effluent by third party as per schedule in tender
document and daily tests in STP labs, including all
chemicals/glassware/supervisory staff/operating staff/up keeping of STP
campus/maintaining log books or other records/all necessary safety 1 Job
measures/CTO or any other scope as per maintenance schedule in tender document

281.02 1st year 1 Job 0.00


281.03 2nd year 1 Job 0.00
281.04 3rd year 1 Job 0.00
281.05 4th year 1 Job 0.00
281.06 5th year 1 Job 0.00
281.07 6th year 1 Job 0.00
281.08 7th year 1 Job 0.00
281.09 8th year 1 Job 0.00
281.10 9th year 1 Job 0.00
281.11 10th year 1 Job 0.00
281.12 11th year 1 Job 0.00
281.13 12th year 1 Job 0.00
281.14 13th year 1 Job 0.00
281.15 14th year 1 Job 0.00
281.16 15th year 1 Job 0.00
282 Electricity and fuel charges during O&M for 15 Years for 39 mld
Daulatganj STP

283.00 Guaranteed Energy Consumption in (KwH/MLD) for 39 MLD


MPS (Note:- The Bidder is required to enter Guaranteed Energy Consumption in
(KwH/MLD). The figure 45442.5 is shown in the quantity column, which is the
multiplication of 1 MLD- capacity of STP , 5475 days - the number of days over the
15 years, and Rs. 8.30 - the power unit rate. 45442.5=1*5475*8.30 is shown in the
quantity column) 1772257.50 KwH/MLD
284.01 Operation and Maintenance cost of 39 mld MPS Daulatganj with all civil, electrical-
mechanical and instrumentation works, effluent channel, appurtment and other
allied works for 15 years as specified in tender document and as per norms of
CPHEEO manual on Sewerage and Sewage Treatment System-2013 (Bidder is
required to quote the total O&M price for 15 years against this row only and
yearwise cost will be auto calculated based on the quoted rate) (The rate shall
include testing of influent, effluent by third party as per schedule in tender
document and daily tests in STP labs, including all
chemicals/glassware/supervisory staff/operating staff/up keeping of STP
campus/maintaining log books or other records/all necessary safety 1 Job
measures/CTO or any other scope as per maintenance schedule in tender document

284.02 1st year 1 Job 0.00


284.03 2nd year 1 Job 0.00
284.04 3rd year 1 Job 0.00
284.05 4th year 1 Job 0.00
284.06 5th year 1 Job 0.00
284.07 6th year 1 Job 0.00
284.08 7th year 1 Job 0.00
284.09 8th year 1 Job 0.00
284.10 9th year 1 Job 0.00
284.11 10th year 1 Job 0.00
284.12 11th year 1 Job 0.00
284.13 12th year 1 Job 0.00
284.14 13th year 1 Job 0.00
284.15 14th year 1 Job 0.00
284.16 15th year 1 Job 0.00
285 Electricity and fuel charges during O&M for 15 Years for 39 mld
Daulatganj MPS

286.00 Guaranteed Energy Consumption in (KwH/MLD) for 39 MLD


MPS (Note:- The Bidder is required to enter Guaranteed Energy Consumption in
(KwH/MLD). The figure 45442.5 is shown in the quantity column, which is the
multiplication of 1 MLD- capacity of STP , 5475 days - the number of days over the
15 years, and Rs. 8.30 - the power unit rate. 45442.5=1*5475*8.30 is shown in the
quantity column) 1772257.50 KwH/MLD

287 Land cost


288 Total land required for 39 MLD stp & 39 MLD mps at daulatganj . 120000.000 RS/Sqm
(Bidders are advise to quote area of land required in square mtrs in column no-5)

289 Total land required for 1 MLD stp & 1 MLD mps at Bairikal . 9000.000 RS/Sqm
(Bidders are advise to quote area of land required in square mtrs in column no-5)

Total in Fig ures

Quoted Ra te in Figures Select

Quoted Ra te in Words INR


NING OF EXISTING 56 MLD STP AT DAULATGANJ

LE
NUMBER # TEXT #

TOTAL AMOUNT TOTAL AMOUNT


including all Taxes, duties, cess In Words
etc as applicable, excluding
G.S.T.
Rs. P

6 7
0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only
0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only
0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only
0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only
0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only
0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only
0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only

0.00 INR Zero Only


0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only
0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.00 INR Zero Only

0.0000 Zero Only

INR Zero Only

Das könnte Ihnen auch gefallen