Beruflich Dokumente
Kultur Dokumente
Q 1 A Fixed beam shown in figure Analyze the beam and draw SFD 15M
BMD. Q1 A Fixed beam shown in figure Analyze the beam and draw SFD 15M
BMD.
OR OR
Q 2 A continuous beam ABC is supported at A,B,C span AB =6m 15M Q 2 A continuous beam ABC is supported at A,B,C span AB =6m 15M
carries udl of 20 kN/m.BC=4m carries point load of 80 kN at carries udl of 20 kN/m.BC=4m carries point load of 80 kN at
center with I AB = I, I BC =2I Draw BMD and SFD use three center with I AB = I, I BC =2I Draw BMD and SFD use three
moment theorem. moment theorem.
Q3 Analyze the beam as shown in fig by slope deflection method Q3 Analyze the beam as shown in fig by slope deflection 15M
Draw BMD and SFD 15M method Draw BMD and SFD
OR
OR
15M Q4 Analyze the portal frame as shown in fig by slope deflection 15M
Q 4 Analyze the portal frame as shown in fig by slope deflection method Draw BMD and SFD.
method Draw BMD and SFD.
Design a two - way slab an interior panel assuming to be
slab is a terrace level as dimension is 5X4m use M 20 /
~*~ Best of Luck ~*~
fe415. 15M
OR
a) Explain demerits of WSM. 3M
b) Design a 3 m X 4.5 m clear dimension interior panel f or ~*~ Best of Luck ~*~
Dr Rajendra Gode Institute of Technology & Research, Amravati
an imposed load of 2 kN /m2 use M 20 Fe 415. Assume 230 Department of Civil Engineering
mm wide support all around draw details. 12M Second Sessional Examination (Session 2018-19)
Semester: V (Section: A & B) Subject Code: 5CE01
Subject: Reinforced Cement Concrete-II Time: 1:00 Hrs
Q2 A 12 m X 8 m c/c dimension hall is supported around by 300 Max Mark: 30 Date: 28 /09/2018
OR
a) Explain demerits of WSM. 3M
b) Design a 3 m X 4.5 m clear dimension interior panel f or
an imposed load of 2 kN /m2 use M 20 Fe 415. Assume 230
mm wide support all around draw details. 12M