Beruflich Dokumente
Kultur Dokumente
TABLE OF CONTENTS
FireLock™ Installation-Ready™ Fittings Style 115 Installation-Ready™ Reducing Coupling. . . . . . 1-23
No. 101 90° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 No. 102 Installation-Ready™ Tee. . . . . . . . . . . . . . . . . . . 1-24
No. 103 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 No. 148 Sprinkler Reducer . . . . . . . . . . . . . . . . . . . . . . . 1-24
No. 102 Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5 No. 143 Close Nipple. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-24
No. 143 Close Nipple. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5 No. 145 Female Threaded x Groove 90° Elbow . . . . . . . . 1-25
FireLock™ and Grooved IPS Pipe Fittings No. 146 Cap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-25
No. 001 – 90° FireLock™ Elbow. . . . . . . . . . . . . . . . . . . . 1-6 No. 140 Male Threaded x Groove Adapter. . . . . . . . . . . . 1-25
No. 003 – 45° FireLock™ Elbow. . . . . . . . . . . . . . . . . . . . 1-6 No. 141 Female Threaded x Groove Adapter . . . . . . . . . . 1-26
No. 10 - 90° IPS Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 No. 144 OGS x IGS™ Grooved Concentric Reducer. . . . . 1-26
No. 11 - 45° IPS Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 RG2100. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-26
No. 002 – FireLock™ Tee. . . . . . . . . . . . . . . . . . . . . . . . . 1-7 SECTION 2 – Victaulic® Hydraulic Control Valves
No. 006 – FireLock™ Cap. . . . . . . . . . . . . . . . . . . . . . . . . 1-7 Victaulic® Hydraulic Control Valves Order Form. . . . . . . . . . . . 2-2
No. 20 IPS Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7 Series 867-42T Pressure Reducing Valve . . . . . . . . . . . . . . . . 2-3
No. 60 IPS Cap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7 Series 867-7UL Pressure Reducing Valve . . . . . . . . . . . . . . . . 2-3
Style 744 FireLock™ Flange Adapter. . . . . . . . . . . . . . . . . . . . 1-8 Series 867-43T Pressure Relief Valve . . . . . . . . . . . . . . . . . . . 2-4
Flange Adapter Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8 Series 867-4UF Pressure Relief Valve. . . . . . . . . . . . . . . . . . . 2-4
No. 65 End of Run Fitting. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9 Series 867-7UF Pressure Relief Valve. . . . . . . . . . . . . . . . . . . 2-5
No. 67 End of Run Fitting. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9 Series 867-400 Pressure Reducing Valve. . . . . . . . . . . . . . . . 2-5
No. 10-DR Drain Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9 Series 866-460 Level Control BERMAD Valve with
Modulating Horizontal Float. . . . . . . . . . . . . . . . . . . . . . . 2-6
Series 728 FireLock™ Ball Valve. . . . . . . . . . . . . . . . . . . . . . 1-10
Series 866-465 Level Control BERMAD Valve with
Series 705 Butterfly Valve – Supervised OPEN . . . . . . . . . . . 1-11 Bi-Level Electric Float . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
Series 705 Weatherproof Actuator Replacement Kit. . . . . . . . 1-11 Series 866-466 Level Control BERMAD Valve with
Series 707C Butterfly Valve – Supervised CLOSED . . . . . . . . 1-12 Vertical Float. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
Series 765 High Pressure Butterfly Valve – Series 866-482 Level Control BERMAD Valve with
Supervised OPEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12 Altitude Pilot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
Series 766 High Pressure Butterfly Valve – Victaulic® Hydraulic Control Valve Accessories . . . . . . . . . . . . 2-8
Supervised CLOSED. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-13 SECTION 3 – Hole Cut Products
Series 771 OS&Y and Series 772 NRS Gate Valves. . . . . . . . 1-14 Styles 920/920N Mechanical-T Outlet. . . . . . . . . . . . . . . . . . . 3-2
Flange Mounting Kits – Series 772H NRS. . . . . . . . . . . . . . . 1-14 Styles 920/920N Mechanical-T Cross. . . . . . . . . . . . . . . . . . . 3-4
Series 773 and Series 774 Post Indicators . . . . . . . . . . . . . . 1-15 Style 922 Outlet Tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
Supervisory Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-15 Style 923 Strapless Outlet. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
Series 717H FireLock™ Check Valve. . . . . . . . . . . . . . . . . . . 1-15 SECTION 4 – Couplings, Spare Parts and Fittings
Series 717 FireLock™ Check Valve. . . . . . . . . . . . . . . . . . . . 1-16 Style 07 Zero-Flex™ Rigid Coupling . . . . . . . . . . . . . . . . . . . . 4-2
Series 722 Threaded Ball Valve. . . . . . . . . . . . . . . . . . . . . . . 1-16 Style 177N QuickVic Flexible Coupling for Steel. . . . . . . . . . . . 4-2
Series 732H FireLock™ Wye-Type Vic-Strainer. . . . . . . . . . 1-17 Style 77 Standard Flexible Coupling . . . . . . . . . . . . . . . . . . . . 4-3
Series 720 Alarm Test Module . . . . . . . . . . . . . . . . . . . . . . . 1-17 Style 75 Flexible Coupling. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
Series 720 Alarm Test Module with Gauge Port Tap . . . . . . . 1-18 Style 750 Reducing Coupling . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Series 720 Alarm Test Module with Pressure Relief Option . . 1-18 Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Series 720 Alarm Test Module With Pressure Relief and Gaskets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Gauge Port Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-18
Metal Liners. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Pressure Relief Valve Kit for Series 720. . . . . . . . . . . . . . . . . 1-19
Plated Trackhead Bolts and Nuts . . . . . . . . . . . . . . . . . . . . . . 4-7
Series 747M Commercial Zone Control Riser Module. . . . . . . 1-19
Go-No-Go Pipe Tape. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
Series 247 Residential Zone Control Riser Module. . . . . . . . . 1-19
Elbows
Pressure Relief Valve Kit for Series 747M . . . . . . . . . . . . . . . 1-19
No. 12 - 22Z\x°. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
Pressure Relief Valve Kit for Series 747M and 247. . . . . . . . . 1-20
No. 13 - 11Z\v° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
Series 735 Fire Pump Test Meter . . . . . . . . . . . . . . . . . . . . . 1-21
No. 100 and No. 110 1Z\x D Long Radius Elbows . . . . . . . . 4-8
No. 29M Tee with Threaded Branch. . . . . . . . . . . . . . . . . . . . 4-9
No. 25 Grooved Reducing Tee . . . . . . . . . . . . . . . . . . . . . . . 4-12 Series P569 Stainless Steel Ball Valve. . . . . . . . . . . . . . . 6-12
No. 29T Threaded Reducing Tee . . . . . . . . . . . . . . . . . . . . . 4-14 Series P569 Repair Kits. . . . . . . . . . . . . . . . . . . . . . . . . . 6-13
No. 50 Concentric Reducer . . . . . . . . . . . . . . . . . . . . . . . . . 4-16 Series P589 Brass Body Ball Valve . . . . . . . . . . . . . . . . . 6-13
No. 51 Eccentric Reducer. . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16 Style P568 90° Elbow – Short Tangent . . . . . . . . . . . . . . 6-13
No. 52 Reducer – Male Threaded Small End. . . . . . . . . . . . . 4-18 Style P562 90° Street Elbow. . . . . . . . . . . . . . . . . . . . . . 6-13
SECTION 5 – VicFlex™ Sprinkler Fitting Systems Style P571 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14
Series AH2-CC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Style P563 45° Street Elbow . . . . . . . . . . . . . . . . . . . . . . 6-14
Series AH2 VicFlex™ Hose. . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Style P572 Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14
Series AH2-300 VicFlex™ Hose. . . . . . . . . . . . . . . . . . . . . . . 5-3 Style P573 Tee – Reducing Branch. . . . . . . . . . . . . . . . . 6-15
Series AH1-CC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3 Style P578 Tee – Reducing Branch Threaded . . . . . . . . . 6-15
Series AH1 VicFlex™ Hose. . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3 Style P574 Concentric Reducer. . . . . . . . . . . . . . . . . . . . 6-16
Series AH5 VicFlex™ Hose. . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4 Style P575 Flange Adapter. . . . . . . . . . . . . . . . . . . . . . . . 6-16
VicFlex™ Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4 Style P566 Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . 6-16
VicFlex™ Reducers and End Fittings. . . . . . . . . . . . . . . . . . . . 5-5 Style P577 Adapter Nipple. . . . . . . . . . . . . . . . . . . . . . . . 6-17
VicFlex™ Preassembled System Order Form. . . . . . . . . . . . . . 5-5 Style P585 Threaded Union. . . . . . . . . . . . . . . . . . . . . . . 6-17
V36 Dry Sprinkler with Integral Style AB6 Style P579 Female Adapter – Threaded. . . . . . . . . . . . . . 6-17
Assembly Order Form . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7 Style P560 End Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-18
V36 Dry Sprinkler with Style AB6 Accessories. . . . . . . . . . . . . 5-8 PFT510 Vic-Press Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . 6-18
Series AQC-U for Clean Room Applications. . . . . . . . . . . . . . . 5-8 Section 7 – Pipe Preparation Tools
Series AQD For Duct Systems. . . . . . . . . . . . . . . . . . . . . . . . . 5-8 Roll Grooving Tools – Field Portable
VicFlex™ Dry Sprinkler Model VS1 . . . . . . . . . . . . . . . . . . . . . 5-9 VE12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
Model VS1 Cover Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9 VE26 S/C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
VicFlex™ Dry Sprinkler Brackets. . . . . . . . . . . . . . . . . . . . . . 5-10 VE26/VE46 Power Drive Kit. . . . . . . . . . . . . . . . . . . . . . . . 7-2
SECTION 6 – Vic-Press™ System VE46. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
for Schedule 10S Stainless Steel Pipe
VE226 B/S/M/C/BSS/MSS/P . . . . . . . . . . . . . . . . . . . . . . . 7-3
Vic-Press 304
VE226 Power Drive Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3
Style P500 Loose Seals. . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
RG2100 Roll Grooving Tool . . . . . . . . . . . . . . . . . . . . . . . . 7-3
Style P597 Standard Coupling. . . . . . . . . . . . . . . . . . . . . . 6-3
Roll Grooving Tools – Field Fabrication
Style P596 Male Adapter – Threaded. . . . . . . . . . . . . . . . . 6-3
VE106. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4
Series P569 Type 316 Stainless Steel Ball Valve. . . . . . . . . 6-4
VE206. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5
Series P589 Brass Body Ball Valve . . . . . . . . . . . . . . . . . . 6-4
VE272SFS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6
Style P586 90° Elbow – Short Tangent . . . . . . . . . . . . . . . 6-4
Roll Grooving Tools – Shop Fabrication
Style P542 90° Street Elbow. . . . . . . . . . . . . . . . . . . . . . . 6-5
VE268. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-7
Style P591 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5
Tool Accessories
Style P543 45° Street Elbow . . . . . . . . . . . . . . . . . . . . . . . 6-5
VAPS112 Pipe Stand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8
Style P592 Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6
Hole Cutting Tools
Style P593 Tee – Reducing Branch. . . . . . . . . . . . . . . . . . 6-6
VHCT900 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9
Style P588 Tee – Reducing Branch – Threaded. . . . . . . . . 6-6
HCT908 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9
Style P594 Concentric Reducer. . . . . . . . . . . . . . . . . . . . . 6-7
Vic-Tap II. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9
Style P595 Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . . 6-7
Vic-Press™ Tool
Style P565 Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . . 6-7
PFT510. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-10
Style P587 Transition Nipple. . . . . . . . . . . . . . . . . . . . . . . 6-8
How to Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-11
Style P584 Threaded Union. . . . . . . . . . . . . . . . . . . . . . . 6-8
Terms and Conditions of Tool Rental. . . . . . . . . . . . . . . . . . . 7-12
Style P599 Female Adapter – Threaded. . . . . . . . . . . . . . . 6-8
Terms and Conditions of Tool Sale. . . . . . . . . . . . . . . . . . . . . 7-13
Style P561 Adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9
Terms and Conditions of Sale . . . . . . . . . . . . . . Inside Back Cover
Style P540 End Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside Back Cover
PFT510 Vic-Press Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9
IV VICTAULIC.COM PL2018-A-FP
Gasket Selection Guide
Gasket Selection Guide
VICTAULIC.COM PL2018-A-FP V
VI VICTAULIC.COM PL2018-A-FP
SECTION 1 – FireLock™ and Fire Protection Products
FireLock™ and
Fire Protection
Products
COUPLING
Installation-Ready™ COMPLETE †
One-Bolt Coupling with Grade
“E” (Type A)
Gasket and
STYLE 109 COUPLING COMPLETE † Stainless
Refer to publication 10.64 PIPE Approx. with Grade “E” (Type A) Steel Bolts & SPARE
inches Wgt. Ea. Gasket Nuts PARTS
Price Each Price Each Grade “E”
(Type A)
Nom. Size Outside Dia. lb Painted Galv. Galv. Gasket
1Z\v 1.660 1.4 $63.50 $76.00 $152.00 $60.00
1Z\x 1.900 1.5 64.50 77.00 154.50 64.00
2 2.375 1.9 73.00 85.00 170.00 67.50
2Z\x 2.875 2.1 84.00 99.50 200.50 74.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
COUPLING
Coupling
FIRELOCK™ SYSTEM FOR GROOVED IPS PIPE
COMPLETE †
with Grade
STYLE 009N “E” (Type A)
Refer to publication 10.64 Gasket and
COUPLING COMPLETE † Stainless
PIPE Approx. with Grade “E” (Type A) Steel Bolts & SPARE
inches Wgt. Ea. Gasket Nuts PARTS
SECTION 1
SECTION 1
Price Each Grade “E” (Type A)
STYLE 005 Approx. Flush-Seal Gasket
Refer to publication 10.02 Nom. Wgt. Each Only
Size lb Painted Galvanized Price Each
1Z\v 1.2 $95.00 $104.50 $85.50 NR
1Z\x 1.2 98.00 114.50 94.00
2 1.6 105.50 124.50 101.50 NR
2Z\x 1.9 126.50 145.50 105.50 NR
3 2.1 135.00 157.50 125.00
4 3.1 188.00 219.50 165.50
5 4.5 310.00 356.00 230.50 NR
6 5.0 341.50 398.50 294.00 NR
8 11.3 551.00 638.50 322.50 NR
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Standard gasket and Flush-Seal™ gasket approved for dry pipe systems to –40°F/–40°C. Based on “typical” pipe surface condi-
tions, supplemental lubricant is recommended for services installed below 0°F/–18°C and for all dry pipe systems or systems
to be subjected to air tests prior to being filled with water. Supplemental lubrication may also be required on pipe with raised
or undercut weld seams or pipe that has voids and/or cracks at the weld seams. Victaulic continues to recommend the use of
Flush-Seal™ gaskets for dry services.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
NR
Non-returnable
45° Elbow NO. 103 45° ELBOW – GRADE “E” (TYPE A) GASKET
Approx.
NO. 143 Size End to End Wgt. Ea.
SECTION 1
2Z\x 2.875 2.375 1.1 58.50
FireLock™ Fittings
FireLock™ Fittings FIRELOCK™ FITTINGS – 90° ELBOW OR 45° ELBOW
Nom.
90° ELBOW NO. 001 Size 90° Elbow No. 001 45° Elbow No. 003
45° ELBOW NO. 003 Approx. Price Each Approx. Price Each
Refer to publication 10.03 Wgt. Each Wgt. Each
inches lb Painted Galv. lb Painted Galv.
2 1.7 $55.50 $71.00 1.8 $55.50 $71.00
2Z\x 3.1 74.50 99.50 2.2 74.50 92.50
3 4.0 96.50 128.00 3.1 96.50 121.00
4 6.7 138.00 190.00 5.6 138.00 183.00
5 12.6 322.50 424.50 8.3 322.50 396.00
6 18.3 379.00 520.00 11.7 379.00 477.50
8 25.5 738.50 1050.50 20.4 738.50 1015.00
NOTE: FireLock™ Fittings are designed for use with FireLock™ and FireLock EZ™ couplings. Use of other products may result in
bolt pad interference.
No. 001 NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
FIRELOCK™ SYSTEM FOR GROOVED IPS PIPE
SECTION 1
No. 003
No. 11
No. 006
SECTION 1
Approx. Tee
TEE NO. 20 Nom. Size Wgt. Ea. No. 20
Refer to publication 07.01 Price Each
inches lb Painted Galv.
C\v 0.6 $223.00 $241.00
1 1.0 172.00 224.00
1Z\v 1.5 172.00 224.00
No. 20 1Z\x 2.0 172.00 224.00
10 73.0 2727.00 3408.00
12 99.0 3545.00 4431.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
PIPE
Adapter inches VIC-FLANGE COMPLETE † SPARE PARTS
Approx. Price Each Grade “E” (Type
STYLE 744 – 175 PSI Nominal Outside Wgt. Each A) Gasket
WITH GRADE “E” (TYPE A) Size Diameter lb Painted Galv. Price Ea.
GASKET Style 744 - Hinged
Refer to publication 10.04 2 2.375 2.7 $271.00 $314.00 $51.50
2Z\x 2.875 4.2 315.50 374.00 60.50
3 3.500 4.8 355.00 425.00 63.50
4 4.500 6.5 461.50 561.50 83.50 NR
5 5.563 8.3 553.00 674.00 98.00
6 6.625 9.0 603.50 733.00 114.50 NR
8 8.626 13.9 757.00 946.00 152.00 NR
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
The Vic-Flange adapters utilize standard ANSI 125/150 flange bolts (supplied by installer). Bolt hole pattern is standard for ANSI
CL. 150 and 125 CL flanges.
For Flange Washers see Spare Parts.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
NR
Non-returnable
Victaulic Flange Victaulic flange adapters require a smooth, hard surface at the mating flange face for
Adapter Washer Notes effective sealing. Some applications, for which the Victaulic flange adapter is
otherwise well suited, do not provide an adequate mating surface. In such cases, it
is recommended that a metal flange washer be inserted between the Victaulic flange
adapter and the mating flange to provide the necessary sealing surface. See Spare
SECTION 1
Approx.
IGS™ Grooved Outlet Nominal Size Weight Each Price Each
inches lb Painted Galv.
NO. 65
1Z\v x 1 0.7 $103.50 $128.00
Refer to publication 10.54
1Z\x 0.8 103.50 128.00
2 1.2 110.00 145.00
2Z\x 1.6 131.00 158.50
3 2.6 172.00 212.00
Approx.
NO. 67 Nominal Size Weight Each Price Each
Refer to publication 10.21 inches lb Painted Galv.
1Z\v x Z\x NPT 0.6 $103.50 $128.00
C\v NPT 0.5 103.50 128.00
SECTION 1
1 NPT 0.6 103.50 128.00
1Z\x x Z\x NPT 0.7 103.50 128.00
C\v NPT 0.7 103.50 128.00
1 NPT 0.7 103.50 128.00
2 x Z\x NPT 0.7 110.00 145.00
C\v NPT 0.7 110.00 145.00
1 NPT 0.9 110.00 145.00
2Z\x x Z\x NPT 1.3 131.00 158.50
C\v NPT 1.2 131.00 158.50
1 NPT 1.3 131.00 158.50
3 x C\v NPT 2.0 172.00 212.00
1 NPT 1.9 172.00 212.00
Approx.
NO. 10-DR Nom. Size Wgt. Ea. Price Each
Refer to publication 10.05 inches lb Painted Galv.
2Z\x 5.2 $258.50 $332.00
3 5.3 330.50 394.00
USA
B - 020 - 4 6 6 T - W2
Threaded
Act. Size Pressure
Type In./mm Code Rating Body/Ball Seat End Connection Operator
B 1/25 010 4 - 365 psi 6 - Bronze/Chrome 6 - Reinforced TFE T - Threaded W2 - UL/ULC/FM Weatherproof Gear
FIRELOCK™ SYSTEM FOR GROOVED IPS PIPE
Grooved
SECTION 1
2 K020705100 $715.00
FOR SERIES 705 – SUPERVISED
2Z\x K024705100 715.00
OPEN ONLY
3 K030705100 715.00
(Consists of mounting bolt, 4 K040705100 767.50
actuator, handwheel and 5 K050705100 767.50
assembly hardware) 6 K060705100 930.50
Refer to publication 10.81 8 K080705100 1971.50
10 K100705100 2565.00
12 K120705100 2565.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
High Pressure SERIES 765 GROOVED END HIGH PRESSURE BUTTERFLY VALVE
High Pressure SERIES 766 GROOVED END HIGH PRESSURE BUTTERFLY VALVE
Nominal Pre-wired
Butterfly Valve – Size without Tap
Supervised CLOSED Approx.
Wgt. Each
SERIES 766 inches lb Part Code Price Each
2 8.2 V020766900 $1039.50
(with Weatherproof Actuator) 2Z\x 9.7 V024766900 1076.00
Refer to publication 10.83 3 10.7 V030766900 1163.00
4 14.0 V040766900 1219.00
5 25.4 V050766900 1825.00
6 28.7 V060766900 1731.00
8 43.0 V080766900 2650.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Flange Mounting Kits FLANGE MOUNTING KITS FOR USE WITH SERIES 772F NRS GATE VALVES
Series 773 and Series SERIES 773 AND SERIES 774 POST INDICATORS
SECTION 1
OSY2 Outside Screw and Yoke Valve Supervisory Switch $395.50
Approx.
Valve Size Weight Each
inches lb Price Each
SERIES 717H 2 10.7 $435.00
Refer to publication 10.08 2Z\x 13.8 459.50
3 20.0 459.50
Approx.
Valve Size Weight Each
inches lb Price Each
SERIES 717 2Z\x 3.6 $459.50
Refer to publication 10.08 3 3.6 459.50
4 20.0 478.00
5 27.0 1160.50
6 38.0 1189.00
8 64.0 2063.00
10 100.0 3930.00
2Z\x and 3”
12 140.0 5126.50
4 – 12”
FIRELOCK™ SYSTEM FOR GROOVED IPS PIPE
Approx. Wgt.
SERIES 722 Nominal Size Each
inches lb Price Each
Refer to publication 08.15
SECTION 1
Approx.
Vic-Strainer Nominal Size Weight Each Price Each
Standard
SERIES 732H inches lb Galvanized * Basket Only
Refer to publication 10.68 2 10.0 $2232.00 $1459.00
2Z\x 14.0 2374.50 1520.50
3 20.0 2707.50 1322.50
4 32.0 3150.50 1374.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Vic-Strainer Series 732H standard components include galvanized body, access cap and coupling (Grade “E” EPDM, plated
bolts and nuts) and Type 304 stainless steel basket (0.062” diameter holes for 2 – 3”/50 – 80 mm sizes; and 0.188” diameter holes
for 4”/100 mm sizes). Contact Victaulic for details.
SECTION 1
inches Orifice lb Price Each lb Price Each
1 x Z\x 7.3 $396.00 – –
ZM\cx 7.3 396.00 – –
1Z\v x Z\x 6.9 455.00 6.6 $455.00
ZM\cx 6.9 455.00 6.6 455.00
1Z\x x Z\x 9.0 742.00 8.5 742.00
ZM\cx 9.0 742.00 8.5 742.00
2 x Z\x 10.1 800.00 9.3 800.00
Series 720T Series 720G ZM\cx 10.1 800.00 9.3 800.00
with Threaded with Grooved
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Ends Ends
Alarm Test Module ALARM TEST MODULE – WITH GAUGE PORT TAP
Alarm Test Module ALARM TEST MODULE – WITH PRESSSURE RELIEF OPTION
Series 720 Alarm Test Module With Pressure Relief and Gauge Port Options
Alarm Test Module ALARM TEST MODULE – WITH PRESSURE RELIEF AND GAUGE PORT OPTIONS
Size Style 720T Threaded with Pressure Relief and Gauge Port Option
SERIES 720 Approx.
WITH PRESSURE RELIEF AND Wgt. Each
GAUGE PORT OPTIONS inches Orifice lb Price Each
Refer to publication 10.22 1 x Z\x 7.3 $629.00
ZM\cx 7.3 629.00
1Z\v x Z\x 6.9 695.50
ZM\cx 6.9 695.50
1Z\x x Z\x 9.0 989.50
ZM\cx 9.0 989.50
2 x Z\x 10.1 1027.50
ZM\cx 10.1 1027.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Riser Module
Kit Body Size Victaulic Price
Nominal inches Part Code Each
FOR SERIES 720 WITH
1 –2 V000720K01 $297.50
PRESSURE RELIEF OPTION
SECTION 1
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
*Price includes all components pictured at left.
See Part Code Configuration Guide
Pressure Relief Valve SERIES 747M AND 247 PRESSURE RELIEF VALVE KIT
Riser Module
Kit Body Size Victaulic Price
Nominal inches Part Code Each
FOR SERIES 747M AND 247
1–6 V000747K01 $494.00
RISER MODULES
Refer to publication 10.97
Part Code SERIES 247 AND 747M RISER MODULES PART CODE CONFIGURATION GUIDE
020 : 2” x 2” x 1”
024 : 2Z\x” x 2Z\x” x 1Z\v”
030 : 3” x 3” x 1Z\v”
040 : 4” x 4” x 2”
060 : 6” x 6” x 2”
SECTION 1
Notes
1. Example: “V040747PFSU56” denotes a Series 747M Commercial Zone Control Riser Module
painted in orange color; 4” grooved inlet/4” grooved outlet/2” grooved drain connection; stan-
dard trim; UL/FM approved; with K5.6 flow restrictor.
2. Available sizes for Series 247 Residential Riser Modules : 010, 012, 014, 020
Available sizes for Series 747M Commercial Riser Modules : 012, 014, 020, 024, 030,
040, 060
3. Approved K Factors for 1” to 2” Series 247 Residential Riser : 028, 030, 035, 042, 049,
Modules 056
Approved K Factors for 1Z\v” to 2” Series 747M Commercial Riser : 028, 030, 035, 042, 049,
Modules 056
Approved K Factors for 2Z\x” to 3” Series 747M Commercial Riser : 042, 049, 056, 069, 080,
Modules 112, 140, 168
Approved K Factors for 4” to 6” Series 747M Commercial Riser : 042, 049, 056, 069, 080,
Modules 112, 140, 168, 250
Nominal Gallons
SERIES 735 Size Minute Style 735 Model S Style 735 Model L
Refer to publication 10.11 Wgt. Ea. Wgt. Ea.
inches (GPM) lb Price Each lb Price Each
2Z\x 100 9.0 $11645.00 14.0 $18796.00
2Z\x 150 9.0 11645.00 14.0 18796.00
3 200 10.0 12818.50 15.0 20099.00
4 250 12.0 14569.00 17.0 20928.50
4 300 12.0 14569.00 17.0 20928.50
4 450 12.0 14569.00 17.0 20928.50
5 500 13.0 15998.00 18.0 21029.50
6 750 15.0 17461.00 20.0 22897.50
6 1000 15.0 17461.00 20.0 22897.50
6 1250 15.0 17461.00 20.0 22897.50
8 1500 22.0 19783.00 27.0 25506.50
8 2000 22.0 19783.00 27.0 25506.50
8 2500 22.0 19783.00 27.0 25506.50
8 3000 22.0 19783.00 27.0 25506.50
10 3500 33.0 23565.00 38.0 29671.50
10 4000 33.0 23565.00 38.0 29671.50
10 4500 33.0 23565.00 38.0 29671.50
12 5000 66.0 29382.50 71.0 36346.50
SECTION 1
Outlet-T and STYLE 922 OUTLET-T AND STYLE 920N MECHANICAL-T – GRADE “E” (TYPE A) GASKET
Approx.
90° Elbow Size Wgt. Ea. Price Each
Actual Outside
NO. 101 Nominal Diameter
Refer to publication 10.54 inches inches lb Painted Galv.
1 1.315 2.2 $15.00 $19.50
Approx.
Rigid Coupling
SECTION 1
Style 115 Installation-Ready™ Reducing Coupling
Approx.
Reducing Coupling Size Wgt. Ea. Price Each
Nominal
NO. 115 inches lb Painted Galv.
Refer to publication 10.54 1 x 1Z\v 1.9 $16.00 $19.50
1Z\x 2.1 18.00 22.00
Approx.
Tee Size Wgt. Ea. Price Each
Actual Outside
NO. 102 Nominal Diameter
Refer to publication 10.54 inches inches lb Painted Galv.
1 1.315 3 $18.50 $24.00
Approx.
End to Wgt.
FIRELOCK™ SYSTEM FOR GROOVED IPS PIPE
NO. 148
End Nominal Size Threaded Outlet Size Each Units per Price per Box
NPT or BSPT Sprinkler Outlet inches inches lb Box Painted Galv.
Refer to publication 10.54 3.0 1 Z\x C\v 0.4 50 $218.50 $260.00
3.5 1 Z\x C\v 0.5 50 240.00 +
4.0 1 Z\x C\v 0.6 50 261.00 +
SECTION 1
Approx. Wgt.
NO. 143 Size End to End Each Price
Refer to publication 10.54 Actual Outside
Nominal Diameter
inches inches inches lb Box of 25
1 1.315 1.5 0.2 $42.00
1 1.315 2.0 0.3 55.00
1 1.315 2.5 0.4 67.00
1 1.315 3.0 0.4 80.00
1 1.315 3.5 0.5 91.00
1 1.315 4.0 0.6 104.00
1 1.315 4.5 0.6 119.00
1 1.315 5.0 0.7 132.50
Approx.
Groove 90° Elbow Size Wgt. Ea. Price Each
Nominal
NO. 145 inches
Refer to publication 10.54 Threaded x
Grooved lb Painted Galv.
Z\x x 1 0.5 $6.50 $7.50
C\v 0.5 6.50 7.50
1 0.5 6.50 7.50
Approx.
NO. 146 Size Wgt. Ea. Price per Box of 20
Refer to publication 10.54 Actual Outside
Nominal Diameter
inches inches lb Painted Galvanized
SECTION 1
No. 140 Male Threaded x Groove Adapter
Size Approx.
Groove Adapter inches Wgt. Ea.
Nom. Size Outside Dia. lb Price Per Box of 50
NO. 140
1 1.315 0.3 $198.00
Refer to publication 10.54
Approx.
Groove Adapter Size Wgt. Ea.
Nominal Actual Outside Diameter
NO. 141 inches inches lb Price Per Box of 50
Refer to publication 10.54 1 1.315 0.5 $198.00
OGS x IGS™ Grooved NO. 144 OGS X IGS™ GROOVED CONCENTRIC REDUCER
Approx.
Concentric Reducer Size Wgt. Ea. Price per Box of 25
Nominal
NO. 144 inches lb Painted Galv.
Refer to publication 10.54 1 x 1Z\v 0.5 $165.00 $200.00
FIRELOCK™ SYSTEM FOR GROOVED IPS PIPE
RG2100
RG2100
Roll Grooving Tool Refer to Section 7 – Pipe Preparation Tools for prices and where to call for purchase information.
RG2100
Victaulic Hydraulic
®
Control Valves
2-2
Victaulic® Hydraulic Control Valves Order Form
030 3" Series 867-7UF Pressure Relief Valve U - Nickel Al. Bronze 25 - ISO-PN25 Magna Latch S - Single Limit Switch, General Purpose
040 4" Series 867-42T Pressure Reducing Valve VI - Grooved ANSI UC - Uncoated 5DC - 110VDC - N.C. S7 - Single Ex Proof, Limit Switch
060 6" Series 867-43T Pressure Relief Valve C606-81 5DO - 110VDC - N.O. S9 - Single EExd Proximity Limit Switch
165 165.1 mm (Standard) 5AC - 110V/50-60 N.C. SS9 - Double EExd Proximity Limit Switch
Level Control
080 8" NP - Female NPT 5AO - 110V/50-60 - N.O. 6 - Pressure Gauge Assembly
Series 866-460 Level Control Valve with Modulating Horizontal Float
Victaulic® Hydraulic Control Valves
100 10" Series 866-465 Level Control Valve with Bi-Level Electric Float 2AC - 220V/50-60 N.C. 6n - S.S. Glycerin Pressure Guage Assembly
120 12" Series 866-466 Level Control Valve with Bi-Level Vertical Float 2AO - 220V/50-60 - N.O. 6m - Monel Pressure Guage Assembly
Series 866-482 Level Control Valve with Altitude Pilot 7 - Ex Proof NEC Class 1 Div. 1 Solenoid
9 - Eexd ATEX Solenoid
Classic Deluge 1
DC - Drip Check
869/Y-1M Hydraulically Controlled Deluge Valve with EasyLock Manual Reset DV - Drain Valve
869/Y-2M Electronically Controlled Deluge Valve with EasyLock Manual Reset D - Manual Emergency Release Box
869/Y-3M Electro-Pneumatically Controlled Deluge Valve with EasyLock Manual Reset H - Machanical Latching
869/Y-4M Pneumatically Controlled Deluge Valve with EasyLock Manual Reset W - Water Motor Alarm Assembly
869/Y-5M Hydraulically Controlled, Anti-Columning Deluge Valve with EasyLock Manual Reset E - Special Elastomer
Combination Pressure Control Deluge 1 F - Large Control Filter
869/Y-2MC Electric Pressure Control Deluge Valve with Manual Reset I - Valve Position Indicator
869/Y-3DC Electric Pressure Control On/Off Deluge Valve J - Junction Box
869/Y-4DC Pneumatic Pressure Control On/Off Deluge Valve N - S.S. 316 Trim Accessories
869/Y-5DC Hydraulic Pressure Control On/Off Deluge Valve Q - Pressure Transmitter
869/Y-6DC Electro-Pneumatic Pressure Control On/Off Deluge Valve K - Special
On/Off Deluge 1
869/Y-3D Electrically Controlled On/Off Deluge Valve
869/Y-3D-RL Electrically Controlled On/Off Deluge Valve with Electric Remote Reset Latch
869/Y-4D Pneumatically Controlled On/Off Deluge Valve
869/Y-5D Hydraulically Controlled On/Off Deluge Valve
869/Y- 6D Electro-Pneumatically Controlled On/Off Deluge Valve
NOTE: Price is not dependent on end connections or right angle configuration unless otherwise stated.
NOTE: "A" trim includes gauges, drip check, drain, manual pull station, and all necessary trim for valve function.
1
Available as 800E and 800Y valve styles.
VICTAULIC.COM PL2018-A-FP
Victaulic® Hydraulic Control Valves
Series 867-42T Pressure Reducing Valve
Pressure Relief Valve Nominal Size High Built Epoxy Red (Standard) *
OGS ANSI Class 300RF
SERIES 867-43T inches Price Each
BERMAD MODEL FP 43T 1Z\x $3557.00 –
Refer to publication 30.93 2 3720.00 –
2Z\x 4464.00 –
3 4703.00 $4703.00
4 5987.50 5987.50
6 8713.50 8713.50
8 13208.50 13208.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Other finishes and valve body materials available upon request.
Agency approvals, such as UL and FM, vary by size and end connection. Refer to publication 30.93 for details.
Pressure Relief Valve Nominal Size High Built Epoxy Red (Standard) *
OGS ANSI Class 150RF NPT
SERIES 867-4UF inches Price Each
BERMAD MODEL FP 430-UF 2 – $3479.00 $3500.00
Refer to publication 30.93 3 $4413.00 4523.00 –
4 5877.00 5675.00 –
6 9868.50 9783.00 –
8 12435.50 12570.50 –
10 – 19560.00 –
12 – 28414.50 –
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Other finishes and valve body materials available upon request.
Agency approvals, such as UL and FM, vary by size and end connection. Refer to publication 30.93 for details.
Above pricing based on model FP-XXX-867-4UF-G-C-ER-NN. All other configurations are priced on application.
HYDRAULIC CONTROL VALVES
SECTION 2
Pressure Relief Valve Nominal Size Standard Polyester Red Coating (Standard) *
ANSI Class ANSI Class ANSI Class
SERIES 867-7UF OGS 150RF 150RF Angled 300RF NPT
BERMAD MODEL FP 730-UF inches Price Each
Refer to publication 30.93 1Z\x $4868.50 $4868.50 $4868.50 – –
2 3728.50 3728.50 3728.50 $3728.00 $3725.00
2Z\x 3751.50 3751.50 3751.50 – 3759.50
3 4815.00 4844.50 4844.50 4770.50 –
4 7252.50 7379.00 7379.00 7263.00 –
6 11796.00 12420.50 12420.50 11990.50 –
8 17195.00 17907.00 17907.00 – –
10 – 31115.00 31115.00 – –
12 – 44332.50 44332.50 – –
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Other finishes and valve body materials available upon request.
Agency approvals, such as UL and FM, vary by size and end connection. Refer to publication 30.93 for details.
Above pricing based on model FP-XXX-867-7UF-X-C-XX-PR-NN. All other configurations are priced on application.
Series 866-465 Level Control BERMAD Valve with Bi-Level Electric Float
Level Control BERMAD Nominal Size High Built Epoxy Red (Standard) *
Valve inches Price Each
2 $4226.00
SERIES 866-465 3 5353.00
BERMAD FP-450-65 4 6657.00
6 10343.00
with Bi-Level Electric Float 8 14704.00
10 22338.50
12 33190.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Other finishes and valve body materials available upon request.
End connection is not differentiated by price. OGS, Class 150RF flange and NPT available.
Above pricing based on model FP-XXX-866-465-G-C-XX-ER-4DC-NN . All other configurations are priced on application.
HYDRAULIC CONTROL VALVES
SECTION 2
Level Control BERMAD Nominal Size High Built Epoxy Red (Standard) *
Valve inches Price Each
2 $5712.50
SERIES 866-466 3 6454.00
BERMAD FP-450-66 4 7755.00
6 11498.00
with Vertical Float 8 15415.00
10 24213.00
12 35139.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Other finishes and valve body materials available upon request.
End connection is not differentiated by price. OGS, Class 150RF flange and NPT available.
Above pricing based on model FP-XXX-866-466-G-C-ER-NN. All other configurations are priced on application.
Level Control BERMAD Nominal Size High Built Epoxy Red (Standard) *
Valve inches Price Each
2 $5712.50
SERIES 866-482 3 6454.00
BERMAD FP-450-82 4 7755.00
6 11498.00
with Altitude Pilot 8 15415.00
10 24213.00
12 35139.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Other finishes and valve body materials available upon request.
End connection is not differentiated by price. OGS, Class 150RF flange and NPT available.
Above pricing based on model FP-XXX-866-482-M6-G-C-XX-ER-NN. All other configurations are priced on application.
Hole Cut
Products
COMPLETE MECHANICAL-T
STYLES 920/920N Size Style Female Threaded Branch † Spare Parts
Refer to publication 11.02 Price Each Standard
Grade
Approx. Bolts & Nuts “E” or
HOLE CUT PRODUCTS
COMPLETE MECHANICAL-T
STYLES 920/920N Size Style Grooved Branch Spare Parts
Refer to publication 11.02 Price Each Standard
Grade
Approx. Bolts & Nuts “E” or
SECTION 3
2 x 1 920N – – – – $22.50
1Z\v 920N 3.2 $119.00 $147.50 Z\x x 2C\v 26.00
1Z\x 920N 3.2 119.00 147.50 Z\x x 2C\v 26.00 NR
2Z\x x 1 920N – – – – 22.50
1Z\v 920N 3.2 145.00 176.00 Z\x x 3Z\v 26.00
1Z\x 920N 3.3 145.00 176.00 Z\x x 3 26.00 NR
3 x 1 920N – – – – 22.50
1Z\v § 920N 3.7 150.00 187.50 Z\x x 2C\v 26.00
Style 920 Grooved 1Z\x § 920N 3.8 150.00 187.50 Z\x x 2C\v 26.00 NR
2§ 920N 4.6 173.00 214.00 Z\x x 3Z\v 26.00
3Z\x x 2 920N 3.8 666.50 832.50 Z\x x 2C\v 26.00
4 x 1 920N – – – – 22.50
1Z\v 920N 3.6 175.00 206.50 Z\x x 2C\v 26.00
1Z\x 920N 3.9 181.50 228.00 Z\x x 2C\v 26.00 NR
2 920N 4.6 181.50 230.50 Z\x x 2C\v 26.00
2Z\x 920 5.0 189.50 244.50 Z\x x 2C\v 29.00
3 920 6.4 201.50 258.50 Z\x x 3Z\v 32.00
5 x 1Z\x 920 7.6 221.00 280.50 B\, x 4C\v 26.00 NR
2 920 8.0 221.00 280.50 B\, x 4C\v 26.00
2Z\x 920 7.9 233.50 297.50 B\, x 4C\v 29.00
3 920 8.8 248.50 319.00 B\, x 4C\v 32.00
6 x 1Z\v 920N 4.8 227.00 290.00 Z\x x 2C\v 26.00
1Z\x 920N 5.1 227.00 290.00 Z\x x 2C\v 26.00 NR
2 920N 5.6 227.00 290.00 Z\x x 2C\v 26.00
2Z\x 920 7.6 248.50 315.50 B\, x 4C\v 29.00
3 920 8.4 259.50 333.00 B\, x 4C\v 32.00
4 920 10.1 288.00 373.50 B\, x 4C\v 42.50
8 x 2 920 11.6 395.50 498.00 C\v x 4Z\v 30.50
2Z\x 920 11.6 395.50 498.00 C\v x 4Z\v 30.50
3 920 11.6 417.00 528.50 C\v x 4Z\v 32.00
4 920 12.5 429.50 554.00 C\v x 4Z\v 42.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Victaulic Hole Cutting Tool available, designed specifically for cutting holes to receive Mechanical-T outlet. See Pipe Preparation
Tool Section for information.
§ Requires Z\x x 3Z\v” bolts when used in cross configuration.
NR
Non-returnable
For FireLock™ IGS Groove Style 922 Outlet-T and Style 920N Mechanical-T Outlet, refer to FireLock IGS Groove System Section in
this book.
Mechanical-T Cross The following combinations of Mechanical-T Crosses can be achieved with the use of two Mechanical-T
Upper Housings of the same run size and the same or different outlet size. Most sizes of Mechanical-T
STYLE 920/920N *
outlets are available with either grooved or female threaded outlets. Your choice must be specified on
each order.
Refer to publication 11.03
STYLES 920/920N MECHANICAL-T CROSS
HOLE CUT PRODUCTS
Run x Branch
A B Number Painted Galv.
2 x 2 x Z\x x Z\x 920N $162.00 $207.50
Z\x x C\v 920N 185.50 237.00
Z\x x 1 920N 162.00 207.50
Z\x x 1Z\v 920N 185.50 237.00
Z\x x 1Z\x 920N 185.50 237.00
C\v x C\v 920N 162.00 237.00
C\v x 1 920N 162.00 207.50
C\v x 1Z\v 920N 185.50 237.00
C\v x 1Z\x 920N 185.50 237.00
1 x 1 920N 162.00 207.50
1 x 1Z\v 920N 185.50 237.00
1 x 1Z\x 920N 185.50 237.00
1Z\v x 1Z\v 920N 185.50 237.00
1Z\x x 1Z\v 920N 185.50 237.00
1Z\x x 1Z\x 920N 185.50 237.00
2Z\x x 2Z\x x Z\x x Z\x 920N 162.00 207.50
Z\x x C\v 920N 162.00 207.50
Z\x x 1 920N 162.00 207.50
Z\x x 1Z\v 920N 222.00 287.50
Z\x x 1Z\x 920N 222.00 305.50
C\v x C\v 920N 162.00 207.50
C\v x 1 920N 162.00 207.50
C\v x 1Z\v 920N 222.00 287.50
C\v x 1Z\x 920N 222.00 305.50
1 x 1 920N 162.00 207.50
1 x 1Z\v 920N 222.00 287.50
1 x 1Z\x 920N 222.00 287.50
1Z\v x 1 920N 222.00 287.50
1Z\v x 1Z\v 920N 222.00 287.50
1Z\x x 1 920N 222.00 287.50
1Z\x x 1Z\v 920N 222.00 287.50
1Z\x x 1Z\x 920N 222.00 237.00
3 x 3 x Z\x x Z\x 920N 181.50 233.50
Z\x x C\v 920N 181.50 233.50
Z\x x 1 920N 222.00 277.00
Z\x x 1Z\v § 920N 222.00 277.00
Z\x x 1Z\x § 920N 222.00 277.00
Z\x x 2§ 920N 256.50 317.50
* Style 920 and Style 920N housings cannot be mated to achieve cross connections. Refer to publication 11.03, or contact
Victaulic for details.
‡ Available grooved only.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Some size Mechanical-T outlets are available with British Standard Pipe Threads (BSPT) female threaded outlets. Contact
Victaulic for details.
§ Requires Z\x x 3Z\v” bolts when used in cross configuration.
SECTION 3
C\v x 1Z\x 920N 222.00 277.00
C\v x 2 920N 256.50 317.50
1 x 1 920N 181.50 233.50
1 x 1Z\v 920N 222.00 222.00
1 x 1Z\x 920N 222.00 277.00
1 x 2 920N 256.50 317.50
1Z\v x 1Z\v § 920N 222.00 277.00
1Z\x x 1Z\v § 920N 222.00 277.00
1Z\x x 1Z\x § 920N 222.00 277.00
2 x 1Z\v § 920N 256.50 289.00
2 x 1Z\x 920N 256.50 317.50
2 x 2§ 920N 256.50 317.50
4 x 4 x Z\x x Z\x 920N 222.00 288.50
Z\x x C\v 920N 222.00 288.50
Z\x x 1 920N 222.00 288.50
Z\x x 1Z\v 920N 269.00 337.50
Z\x x 1Z\x 920N 269.00 337.50
Z\x x 2 920N 288.50 339.50
C\v x C\v 920N 222.00 288.50
C\v x 1 920N 222.00 288.50
C\v x 1Z\v 920N 269.00 337.50
C\v x 1Z\x 920N 269.00 337.50
C\v x 2 920N 288.50 339.50
1 x 1 920N 222.00 288.50
1 x 1Z\v 920N 269.00 339.50
1 x 1Z\x 920N 288.50 337.50
1 x 2 920N 288.50 339.50
1Z\v x 1Z\v 920N 269.00 337.50
1Z\x x 1Z\v 920N 269.00 337.50
1Z\x x 1Z\x 920N 269.00 337.50
2 x 1Z\v 920N 288.50 339.50
2 x 1Z\x 920N 288.50 339.50
2 x 2 920N 288.50 339.50
2Z\x x 2Z\x 920 288.50 365.50
3 x 2Z\x 920 300.00 387.50
3 x 3 920 300.00 387.50
* Style 920 and Style 920N housings cannot be mated to achieve cross connections. Refer to publication 11.03, or contact
Victaulic for details.
‡ Available grooved only.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Some size Mechanical-T outlets are available with British Standard Pipe Threads (BSPT) female threaded outlets. Contact
Victaulic for details.
§ Requires Z\x x 3Z\v” bolts when used in cross configuration.
SECTION 3
1 1.20 23.50 47.50
1Z\x x Z\x 1.15 23.50 44.00
C\v 1.20 23.50 44.00
1 1.42 23.50 48.50
2 x Z\x 1.30 23.50 48.50
C\v 1.37 23.50 48.50
1 1.50 25.50 54.00
2Z\x x Z\x 1.40 27.50 54.00
C\v 1.50 27.50 54.00
1 1.65 27.50 56.00
For FireLock IGS Groove Style 922 Outlet-T and Style 920N Mechanical-T Outlet, refer to FireLock™ IGS Groove System Section in
this book.
4 – 8”
Vic-Tap II * Parts A and B are designed for use with Style 931 Vic-Tap II Mechanical-T units; (Part C) for tapping into
systems under pressure up to 500 psi.
Part “A” Includes drill guide base with extended shaft, arbor, pilot drill, 2C\,” hole saw, packing gland and
HP-70 Rigid Coupling for connection to Vic-Tap II.
Part “B” Includes drill motor with ground fault interrupt and clip-on feed wheel assembly.
HOLE CUT PRODUCTS
Part “C” Vic-Tap II with 2Z\x” full port ball valve factory mounted. Available in sizes 4 x 2Z\x”, 5 x 2Z\x”, 6 x
SECTION 3
2Z\x”, and 8 x 2Z\x”. Available for purchase only (parts not sold separately).
* Parts A & B can be purchased separately.
Refer to Section 7 – Pipe Preparation Tools for prices and where to call for purchase information.
Couplings, Spare
Parts and Fittings
COUPLING COUPLING
Rigid Coupling Approx. COMPLETE † COMPLETE †
Wgt. With Grade “E” or with Flush-Seal
STYLE 07 PIPE Ea. “T” Gasket “E” or “T” Gasket SPARE PARTS
inches Price Each Price Each Plated Bolt & Nut
(with Style 77 gasket) Nom. Outside Size §
Refer to publication 06.02 Size Dia. lb Painted Galv. Painted Galv. No. * Inches
1 1.315 1.6 $86.50 $108.50 $122.00 $145.50 2 C\, x 2
1Z\v 1.660 1.6 80.50 101.50 114.50 136.00 2 C\, x 2
1Z\x 1.900 1.6 86.50 108.50 122.00 145.50 2 C\, x 2
2 2.375 2.3 110.00 137.50 144.50 172.00 2 Z\x x 2Z\x
2Z\x 2.875 2.6 125.00 158.00 173.00 202.00 2 Z\x x 2C\v
3 3.500 3.0 145.00 183.50 182.50 223.50 2 Z\x x 2Z\x
4 4.500 5.3 201.00 258.50 255.00 314.00 2 Z\x x 2C\v
5 5.563 7.4 258.50 337.50 403.00 708.50 2 B\, x 3Z\v
6 6.625 8.3 342.00 442.50 474.00 580.00 2 B\, x 3Z\v
8 8.625 15.1 537.00 698.00 626.50 783.50 2 C\v x 4Z\v
10 10.750 23.5 1043.00 1391.00 1253.00 1590.50 2 M\, x 6Z\x
12 12.750 28.2 1164.50 1558.50 1424.50 1831.50 2 M\, x 6Z\x
COUPLINGS, SPARE PARTS AND FITTINGS
COUPLING COUPLING
STYLE 77 COMPLETE † COMPLETE †
Approx. With Grade “E” or With Flush-Seal
Refer to publication 06.04 PIPE Wgt. Ea. “T” Gasket “E” or “T” Gasket SPARE PARTS
inches Price Each Price Each Plated Bolt & Nut
Nom. Outside Size §
Size Dia. lb Painted Galv. Painted Galv. No.* Inches
C\v 1.050 1.1 $63.00 $84.00 $97.00 $119.00 2 C\, x 2
1 1.315 1.2 63.00 84.00 97.00 119.00 2 C\, x 2
1Z\v 1.660 2.0 81.50 108.50 119.00 146.50 2 Z\x x 2Z\x
1Z\x 1.900 2.1 88.50 115.50 124.50 153.50 2 Z\x x 2Z\x
2 2.375 2.6 95.00 125.00 130.00 162.00 2 Z\x x 2Z\x
2Z\x 2.875 3.1 110.50 153.50 158.00 200.50 2 Z\x x 2C\v
3 3.500 3.7 122.00 168.50 162.50 210.50 2 Z\x x 2C\v
3Z\x 4.000 5.6 175.00 244.00 234.00 307.00 2 B\, x 3Z\v
4 4.500 6.7 176.00 247.50 234.50 307.00 2 B\, x 3Z\v
5 5.563 10.6 264.50 379.50 408.00 529.50 2 C\v x 4Z\v
6 6.625 12.0 313.00 447.50 453.50 594.00 2 C\v x 4Z\v
8 8.625 20.8 507.00 753.00 610.50 836.50 2 M\, x 5
10 10.750 27.8 825.50 1182.00 979.00 1315.50 2 1 x 6
12 12.750 31.1 938.00 1342.00 1150.00 1513.00 2 1 x 6Z\x
* Number of bolts equals number of segments supplied.
SECTION 4
Style 75 Flexible Coupling
Gaskets
SECTION 4
1Z\x 51.50 NR 91.50
2 51.50 NR 94.00 NR
2Z\x 60.50 NR 113.50 NR
3 64.50 NR 113.50 NR
3Z\x 80.50 146.50
5 104.00 NR 267.00
6 111.50 NR 273.50 NR
8 152.00 NR 282.00 NR
10 190.00 NR 363.50
12 221.00 NR 432.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NR
Non-returnable
SILICONE GASKETS
FOR STYLES 07, 75, 77 COUPLINGS
Metal Liners
SECTION 4
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Each box contains 6 Go-No-Go Tapes.
# Tool discount applies.
Long Radius - LONG RADIUS – 90° LONG RADIUS ELBOW OR 45° LONG RADIUS ELBOW
Nom. Size 90° Long Rad. Elbow No. 100 * 45° Long Rad. Elbow No. 110 *
1Z\x D Elbows Approx. Price Each Approx. Price Each
Refer to publication 07.01 Wgt. Ea. Wgt. Ea.
inches lb Painted Galv. lb Painted Galv.
2 2.5 $251.00 $329.00 1.8 $218.50 $275.50
2Z\x 3.4 314.00 360.00 2.8 693.50 780.00
3 6.0 251.00 329.00 4.9 218.50 275.50
4 12.3 372.50 497.50 7.3 264.50 351.00
5 18.0 1883.00 2158.50 14.8 (sw) 1750.00 1920.50
No. 100 6 30.4 1078.50 1416.00 17.4 774.00 992.00
8 66.0 2575.50 3292.00 36.0 1345.00 1748.00
10 107.0 2962.00 3702.50 57.0 1815.00 2269.00
12 156.0 3259.00 4073.50 90.0 2451.50 3064.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
No. 110
Tee with
Refer to publication 07.01 Approx. Male Threaded
Nom. Size Wgt. Ea. Branch No. 29M
Price Each
inches lb Painted Galv.
C\v 0.6 $438.50 $492.50
No. 29M 1 1.0 – –
1Z\v 1.5 359.00 421.00
1Z\x 2.0 558.50 657.50
2 3.0 359.00 421.00
3Z\x 7.9 (sw) + +
4 11.3 740.00 1017.00
5 17.8 2123.00 +
6 25.7 1895.50 2231.00
8 47.6 + +
10 99.0 + +
12 133.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
Cross and Wye CROSS AND WYE – STEEL CROSS OR STEEL 90 TRUE Y
SECTION 4
Wgt. Ea. Wgt. Ea.
inches lb Painted Galv. lb Painted Galv.
C\v 0.9 + + 0.7 + +
1 1.3 $413.00 $476.00 1.1 $631.50 +
1Z\v 2.1 496.00 577.50 1.5 631.50 +
No. 35
1Z\x 2.5 534.50 619.50 1.8 631.50 $751.50
2 3.8 305.50 364.00 2.5 631.50 751.50
2Z\x 6.1 305.50 364.00 4.3 631.50 751.50
3 10.5 543.00 663.50 6.1 754.50 897.00
3Z\x 11.5 1089.00 1298.00 9.6 + +
No. 33 4 15.8 898.50 1105.50 9.8 988.50 1187.50
4Z\x 18.5 + + – – –
5 20.0 1831.00 2205.50 15.0 1413.50 1697.00
6 28.0 2348.00 2850.50 22.3 1744.00 2125.00
8 48.0 3093.00 3826.50 36.0 2511.50 3086.00
10 121.5 5073.50 6276.00 69.9 4169.50 5107.50
12 110.0 7321.50 9120.00 80.0 4605.50 5824.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Adapter Nipples ‡ ADAPTER NIPPLES – GROOVED X THREADED, GROOVED X BEVELED, OR GROOVED X GROOVED
add $159.00 to No. 40, 42 or 43 Nipple prices and request No. 40-H, 42-H or 43-H on order. No. 40-H, 42-H and 43-H are non-
cancellable and non-returnable.
* These sizes available only in No. 42 grooved x beveled and No. 43 grooved x grooved.
+ Quoted on application. Contact Victaulic for pricing and availability.
SECTION 4
Approx. No. 80
Adapter Nom. Size Wgt. Each Price Each
Refer to publication 07.01 inches lb Painted Galv.
C\v 1.0 $569.50 $630.00
1 1.0 610.00 654.50
1Z\v 1.5 (sw) 323.00 362.00
No. 80 1Z\x 1.5 (sw) 417.50 445.50
2 1.4 199.00 232.50
2Z\x 1.5 199.00 232.50
3 2.9 229.50 280.50
4 4.5 350.50 439.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
Adapter Elbows ADAPTER ELBOWS – 90° ADAPTER ELBOW OR 45° ADAPTER ELBOW
Nom. Size 90° Adapter Elbow No. 18 45° Adapter Elbow No. 19
Refer to publication 07.01
Approx. Price Each Approx. Price Each
Wgt. Ea. Wgt. Ea.
inches lb Painted Galv. lb Painted Galv.
C\v 0.5 $285.00 $302.50 0.5 $290.00 $307.00
1 0.5 191.50 236.50 0.6 – –
1Z\v 0.9 214.00 236.50 0.6 – –
No. 18 1Z\x 1.1 272.00 315.50 0.9 314.00 335.00
2 2.5 191.50 236.50 1.9 – –
2Z\x 3.0 331.00 362.00 2.3 323.00 333.00
3 5.8 307.00 375.50 5.0 549.00 589.50
6 17.6 946.00 1195.50 12.7 1150.50 1279.00
No. 19 NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details.
SECTION 4
SECTION 4
Nominal Approx.
Threaded Small End Size Wgt. Ea. Price Each
Refer to publication 07.01 inches
Inlet x Outlet lb Painted Galv.
1Z\x x 1 0.8 $135.50 $166.50
1Z\v 0.9 142.00 167.00
2 x C\v 0.9 135.50 166.50
No. 52
1 0.7 135.50 166.50
1Z\v 1.2 135.50 166.50
1Z\x 1.0 135.50 166.50
2Z\x x 1 1.1 182.50 210.00
1Z\v 1.2 191.50 235.00
1Z\x 1.3 200.50 235.00
2 1.4 135.50 166.50
3 x C\v 1.5 (sw) 962.00 1023.50
1 1.3 147.00 177.00
1Z\x 1.5 166.50 199.00
2 1.5 166.50 199.00
2Z\x 2.4 200.50 235.00
4 x 1 2.3 189.50 229.00
1Z\x 2.7 440.50 576.00
2 2.6 201.50 241.00
COUPLINGS, SPARE PARTS AND FITTINGS
VicFlex™ Sprinkler
Fitting Systems
Series AH1-CC
VicFlex™ Brackets
Style AB12
For suspended and hard-lid ceilings, allows for – 0.4 A040AQBB12 10 11.00
vertical sprinkler adjustment, and allows for low
profile installation down to 4” | 100 mm
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NR
Non-returnable
5-6
Bill Company Name Order No. Date
To:
Ship
Address To: Company Name
Address
A 0
VicFlex™ Sprinkler Fitting Systems
Sprinkler Sprinkler Deflector Sprinkler Sprinkler Sprinkler Sprinkler Room Size/ Reducer Hose Hose Nipple
Class Frame Thread Style * Temperature Response K-Factor Finish Escutcheon (outlet) Length Style (Inlet) Bracket
❑ A - VicFlex ❑ 27 - V27 ❑ 1 - ½" NPT ❑ B - STD PEND ❑ A - 135°F/57°C ❑ S - Standard ❑ H - 4.9 ❑ 1 - Plain Brass ❑ L - Large ❑ 1 - 5¾" Straight ❑ 2 - 31" ❑ 1 - AH1 ❑ 2 - 2¼ x 1" NPT ❑ 0 - No Bracket
❑ 31 - V31 ❑ 2 - ¾" NPT ❑ P - STD CNC ❑ C - 155°F/68°C ❑ Q - Quick ❑ 4 - 5.6 ❑ 2 - Chrome ❑ S - Small ❑ 2 - 9" Straight ❑ 3 - 36" ❑ 2 - AH2 Straight
❑ 34 - V34 ❑ 6 - ½" BSPT ❑ G - ECLH PEND ❑ F - 200°F/93°C ❑ 5 - 8.0 ❑ 4 - White (RAL ❑ W - White SS ❑ 3 - 13" Straight ❑ 4 - 48" ❑ 5 - AH5 ❑ 6 - 2¼ x 1" BSPT
❑ 38 - V38 ❑ 7 - ¾" BSPT ❑ J - ECLH CNC ❑ 6 - 11.2 9010) Escutcheon ❑ 4 - 4¾" Elbow ❑ 5 - 60" ❑ 6 - AH2-300 Straight
❑ K - RES PEND ❑ 7 - 14.0 ❑ N - VC250 ❑ X - Stainless Escutcheon ❑ 5 - 6¼" Elbow ❑ 6 - 72" ❑ 7 - AH1-CC ❑ 7 - 2¼ x ¾" BSPT
❑ N - VC250 Straight
❑ N - RES CNC ❑ 6 - Short Low Profile ❑ 8 - AH2-CC
❑ 0 - N/A 90° Elbow ❑ 8 - 2¾ x 1¼" BSPT
Straight
❑ 7 - Long Low Profile
90° Elbow
NOTE: All systems are POA. Contact customer care for pricing.
VICTAULIC.COM PL2018-A-FP
V36 Dry Sprinkler with Integral Style AB6 Assembly Order Form
Address
Quantity (as specified below): If units of different size, type or other option are required, please attach additional form(s) with their specification(s) separately.
A 36 3 0 0 AB6 2 2
VicFlex™ Sprinkler Fitting Systems
A A Freezer Wall
Sprinkler Sprinkler Deflector Sprinkler Sprinkler Sprinkler Sprinkler Escutcheon Dimension Dimension Escutcheon Bracket Thickness Hose Hose
Class Frame Thread Style Temperature Response K-Factor Finish Material Inches ¼" Style Style ¼" Style Length Nipple
❑ A - VicFlex™ ❑ 36 - V36 ❑ 3 - 1" NPT ❑ B - STD ❑ A - 135°F/57°C ❑ S - Standard ❑ 4 - 5.6 ❑ 2 - Chrome ❑ 0 - Cold ❑ 11 ❑0 ❑ 11 - Flush ❑ AB6 - AB6 ❑ 030 - 3" ❑ 2 - AH2 ❑ 2 - 31" ❑ 1 - 1" BSPT
Sprinklers PEND ❑ C - 155°F/68°C ❑ Q - Quick ❑ 5 - 8.0 ❑ 4 - White Rolled Steel ❑ 16 ❑ 13 - Sleeve ❑ 040 - 4" Hose ❑ 3 - 36" ❑ 2 - 1" NPT
❑ C - HOR ❑ F - 200°F/93°C (RAL 9010) ❑ N - VC250 ❑ 18 and Skirt ❑ 050 - 5" ❑ 8- ❑ 4 - 48"
SIDEWALL ❑ J - 286°F/141°C ❑ X - Stainless ❑ 20 ❑ 060 - 6" AH2-CC ❑ 5 - 60"
Steel ❑ 22 ❑ 070 - 7" ❑ 6 - 72"
❑ 24 ❑ 080 - 8"
❑ 26 ❑ 090 - 9"
❑ 28 ❑ 100 - 10"
❑ 30 ❑ 110 - 11"
❑ 120 - 12"
V36 Dry Sprinkler with Integral Style AB6 Assembly Order Form
NOTE: All systems are POA. Contact Customer Care for pricing.
VICTAULIC.COM PL2018-A-FP
5-7
VICFLEX™ SPRINKLER FITTING SYSTEMS
SECTION 5
VicFlex™ Sprinkler Fitting Systems
V36 Dry Sprinkler with Style AB6 Accessories
Series AQC-U Size Approx. Wgt. Ea. Victaulic Part No. Price
inches lb Each
FOR CLEAN ROOM 36 x Z\x 2.8 A36HAQC000 $433.50
APPLICATIONS 48 x Z\x 3.2 A48HAQC000 456.00
Refer to publication 10.86 72 x Z\x 4.0 A72HAQC000 563.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTE: Please Refer to publication 10.86 for certifications and listings.
VicFlex™ Dry Sprinkler Length Approx. Wgt. Ea. Box Price Each
Model VS1 V3505, V3506,
V3509, V3510
Recessed or Sleeve
RECESSED OR SLEEVE AND and Skirt Pendent V3517, V3518
SKIRT inches lb Quantity † or Sidewall Concealed Pendent
PENDENT OR SIDEWALL, 38 3.9 5 $547.50 $605.50
CONCEALED PENDENT 50 4.3 5 586.00 644.50
1” NPT Thread 58 4.6 5 625.00 684.00
K5.6 NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Refer to publication 10.91 NOTE: Concealed cover plates must be ordered separately.
† Sold in box quantities of five (5) only.
Flat Plate Recessed Sleeve and Skirt Recessed Sleeve and Skirt
Concealed Pendent Pendent Pendent Sidewall Sidewall
Recessed Size
Deflector Escutcheon Escutcheon
Class Style Thread Style Temperature Response K Factor Finish Material Code Inches Style †
A 35 = 3 = 1" NPT B = Pendent A = 135°F/57°C Q = Quick 4 = K5.6 4 = White W = White 380 = 38" 12 = Recessed
V35 8 = 25 mm C = Horizontal C = 155°F/68°C S = Std. N = VC-250 ‡ Stainless 500 = 50" 13 = Sleeve and
BSP Sidewall E = 175°F/79°C 0 = Concealed Steel 580 = 58" Skirt
P - Concealed F = 200°F/93°C X = Stainless 15 = Concealed
J = 286°F/141°C Steel
Vic-Press™ System
for Schedule 10S
Stainless Steel Pipe
The Victaulic® Vic-Press™ System for joining Schedule 10S Type 304 (L) stainless
steel pipe provides a fast, easy, clean, and reliable means for joining Z\x – 2”/15 – 50
mm standard ASTM A312 Schedule 10S stainless steel pipe. Vic-Press™ Schedule
SECTION 6
10S products are designed for pressure service up to 500 psi/3450 kPa or ANSI
Class 150 (except steam, according to standard temperature/pressure charts) for
water, oil, noncombustible gaseous and general chemical services and are dimen-
sioned to ANSI/ASME B36.19M. Refer to seal selection data for the intended service.
The Vic-Press™ Schedule 10S System requires no flame or arc as with welding, and
no cutting oil, chips or preparation time as with threading or flanging. Off-the-shelf
standard ASTM A312 Schedule 10S stainless steel pipe is cut to size, inserted into
the coupling and the coupling or fitting is pressed onto the pipe in seconds.
The Vic-Press™ Schedule 10S System meets the hanging requirements of ASME
B31.1, B31.3 and B31.9.
Vic-Press™ Schedule 10S Type 304 couplings and fittings are ANSI/NSF 61 Annex
G Certified for cold (+86°F/+30°C) and hot (+180°F/+82°C) potable water service for
Grade H and Grade E seal materials. Unless specifed otherwise, Grade "H" seals will
be supplied. FM Approved to 175 psi/1200 kPa service for above ground sprinkler
systems.
Vic-Press 304
For information pertaining to gasket seals for couplings, seals for Vic-Press™ products, O-rings for
Victaulic® Bolted Split Sleeve products and general definition/seal material Selection,
refer to publication 05.01.
For specific chemical and temperature compatibility, refer to the
Gasket Chemical Services Guide Long Report (GSG-100).
WARNING
• Before attempting to install any Vic-Press™ Schedule 10S System products,
carefully read and fully understand the “Vic-Press™ Schedule 10S Products
SECTION 6
damage, product damage, joint leakage, and/or joint failure.
Nominal
LOOSE SEALS Size Price Each †
Refer to publication 18.12 Standard Grade “H” HNBR or Grade “E” EPDM
inches Seal
Z\x $10.50 NR
C\v 11.50 NR
1 14.50 NR
1Z\x 18.50 NR
2 25.50 NR
† Specify choice clearly on order.
NR
Non-returnable
Style P597 STYLE P597 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Approx.
STANDARD COUPLING Nominal Weight
Size Each Price Each †
(P X P) Standard Grade “H” HNBR or
Refer to publication 18.12 inches lb Grade “E” EPDM Seal
Z\x 0.2 $63.50
C\v 0.3 70.00
1 0.5 79.00
1Z\x 0.7 105.50
2 1.0 138.50
† Specify choice clearly on order.
Style P596 STYLE P596 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Approx.
MALE ADAPTER – THREADED Nominal Weight
Size Each Price Each †
(P X M) Standard Grade “H” HNBR or Grade “E”
Refer to publication 18.12 inches lb EPDM Seal
Z\x x Z\x 0.3 $118.50
C\v x Z\x 0.4 123.00
C\v 0.4 123.00
1 0.5 142.50
1 x C\v 0.5 146.00
1 0.6 146.00
1Z\x x C\v 0.8 271.00
1Z\x 1.0 242.50
2 x 2 1.4 299.00
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Series P569 For Series P569 pricing, please refer to Series P569 in the Type 316 section.
PxP
PxG
GxG
Series P589 SERIES P589 – VIC-PRESS™ SCHEDULE 10S ENDS WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
VIC-PRESS™ SCHEDULE 10S Size Weight Each End to End Price Each †
SYSTEM BRASS BODY BALL Standard Grade “H”
VALVE HNBR or Grade “E”
inches lb Inches EPDM Seal
Stainless Steel Vic-Press™ Type 304 Z\x 1.0 9.03 $371.50
Schedule 10S Ends C\v 1.6 9.12 408.00
Refer to publication 18.12 1 2.8 10.11 488.50
1Z\x 4.7 11.18 685.00
2 6.9 12.69 838.50
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P586 STYLE P586 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Approx.
90° ELBOW – SHORT TANGENT Nominal Weight
Size Each Price Each †
(P X P) Standard Grade “H” HNBR or
Refer to publication 18.12 inches lb Grade “E” EPDM Seal
Z\x 0.3 $118.00
C\v 0.4 132.50
1 0.8 157.50
1Z\x 1.4 309.50
2 2.0 395.50
† Specify choice clearly on order.
Style P542 STYLE P542 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Approx.
90° STREET ELBOW Nominal Weight
Size Each Price Each †
SECTION 6
C\v
1 0.7 157.50
1Z\x 1.4 309.50
2 2.0 395.50
† Specify choice clearly on order.
Style P591 STYLE P591 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
45° ELBOW Size Weight Each Price Each †
Standard Grade “H” HNBR or
(P X P) inches lb Grade “E” EPDM Seal
Refer to publication 18.12 Z\x 0.2 $105.00
C\v 0.4 116.00
1 0.8 138.00
1Z\x 1.7 269.50
2 2.5 345.00
† Specify choice clearly on order.
Style P543 STYLE P543 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
45° STREET ELBOW Size Weight Each Price Each †
Standard Grade “H” HNBR or
(P X T) inches lb Grade “E” EPDM Seal
Refer to publication 18.12 Z\x 0.2 $105.00
C\v 0.4 116.00
1 0.8 138.00
1Z\x 1.7 269.50
2 2.5 345.00
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P592 STYLE P592 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Approx.
TEE Nominal Weight
Size Each Price Each †
VIC-PRESS™ FOR SCHEDULE 10S
C\v
1 0.9 251.50
1Z\x 1.5 322.00
2 2.1 400.00
† Specify choice clearly on order.
Style P593 STYLE P593 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Approx.
TEE – REDUCING BRANCH Nominal Weight
Size Each Price Each †
(P X P X P) Standard Grade “H” HNBR or
Refer to publication 18.12 inches lb Grade “E” EPDM Seal
C\v x C\v x Z\x 0.5 $237.00
1 x 1 x Z\x 0.8 244.50
C\v 0.8 250.50
1Z\x x 1Z\x x Z\x 1.2 295.00
C\v 1.3 298.50
1 1.4 300.00
2 x 2 x Z\x 1.7 384.00
C\v 1.7 390.00
1 1.8 400.50
1Z\x 2.0 441.50
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P588 STYLE P588 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Approx.
TEE – REDUCING BRANCH – Nominal Weight
Size Each Price Each †
THREADED
Standard Grade “H” HNBR or
(P X P X F) inches lb Grade “E” EPDM Seal
Refer to publication 18.12 Z\x x Z\x x Z\x 0.4 $322.00
C\v x C\v x Z\x 0.5 348.50
C\v 0.6 351.50
1 x 1 x Z\x 0.9 354.50
C\v 0.9 355.50
1 1.1 386.00
1Z\x x 1Z\x x Z\x 1.4 400.50
C\v 1.5 405.50
1 1.5 442.50
2 x 2 x Z\x 1.7 457.00
C\v 1.7 461.50
1 2.0 494.50
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P594 STYLE P594 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Approx.
CONCENTRIC REDUCER Nominal Weight
Size Each Price Each †
SECTION 6
Z\x
C\v 0.7 206.50
1Z\x x Z\x 0.9 364.00
C\v 1.0 341.50
1 1.1 190.50
2 x Z\x 1.2 674.50
C\v 1.3 304.50
1 1.4 235.00
1Z\x 1.6 235.00
† Specify choice clearly on order.
Style P595 STYLE P595 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
FLANGE ADAPTER Size Weight Each Price Each †
Standard Grade “H” HNBR or
(P X L) inches lb Grade “E” EPDM Seal
Refer to publication 18.12 Z\x 2.2 $866.00
C\v 2.3 892.00
1 2.8 905.50
1Z\x 3.6 1103.00
2 5.8 1228.00
† Specify choice clearly on order.
Style P565 STYLE P565 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Approx.
FLANGE ADAPTER Nominal Weight
Size Each Price Each †
(VAN STONE TYPE)
Standard Grade “H” HNBR or
(P X L) inches lb Grade “E” EPDM Seal
Refer to publication 18.12 Z\x 2.4 $303.00
C\v 2.5 303.00
1 3.0 408.00
1Z\x 4.1 449.50
2 6.8 482.00
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Approx.
TRANSITION NIPPLE Nominal Weight
Size Each Unit End to End Price
VIC-PRESS™ FOR SCHEDULE 10S
Style P584 STYLE P584 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
THREADED UNION ** Size Weight Each Price Each †
Standard Grade “H” HNBR or
(P X P) inches lb Grade “E” EPDM Seal
Refer to publication 18.12 Z\x 3.0 $711.50
C\v 3.7 808.00
1 4.3 983.00
1Z\x 6.0 1680.50
2 6.8 2070.50
† Specify choice clearly on order.
** Grooved End Union - A grooved end union can be formed with two Style P587 (Type 304 stainless) transition nipples (see
above) and a variety of grooved end couplings equipped with varied gasket materials to meet service requirements. For stan-
dard ductile iron couplings, stainless steel couplings and gaskets refer to the Stainless Steel Products section.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P599 STYLE P599 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Approx.
FEMALE ADAPTER – THREADED Nominal Weight
Size Each Price Each †
(P X F) Standard Grade “H” HNBR or Grade “E”
Refer to publication 18.12 inches lb EPDM Seal
Z\x x Z\x 0.3 $144.50
C\v x Z\x 0.3 145.00
C\v 0.4 147.50
1 x Z\x 0.7 155.50
C\v 0.6 166.50
1 0.6 176.50
1Z\x x 1 1.0 278.00
1Z\x 1.0 349.50
2 x 1Z\x 1.3 344.00
2 1.2 379.00
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P561 STYLE P561 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
WELD ADAPTER Size Weight Each Price Each †
SECTION 6
1 0.6 141.00
1Z\x 0.9 244.50
2 1.4 289.50
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Nominal Approx.
END CAP Size Weight Each Price
Refer to publication 18.12 inches lb Each
Z\x 0.1 $147.00
C\v 0.1 162.50
1 0.3 173.50
1Z\x 0.4 222.00
2 0.5 276.00
PFT510 The Vic-Press Schedule 10S System requires a tool specifically designed for products on off-the-shelf stan-
dard ASTM A312 Schedule 10S stainless steel pipe. Refer to Pipe Preparation Tools section for prices and
Vic-Press 10S Tool where to call for purchase information.
NOTE: Victaulic Tool Discount will apply.
PFT510 Tool
The Victaulic® Vic-Press™ System for joining Schedule 10S Type 316 (L) stainless
steel pipe provides a fast, easy, clean, and reliable means for joining Z\x – 2”/15 – 50
mm standard ASTM A312 Schedule 10S stainless steel pipe. Vic-Press™ Schedule
SECTION 6
10S products are designed for pressure service up to 500 psi/3450 kPa or ANSI
Class 150 (except steam, according to standard temperature/pressure charts) for
water, oil, noncombustible gaseous and general chemical services and are dimen-
sioned to ANSI/ASME B36.19M. Refer to seal selection data for the intended service.
The Vic-Press™ Schedule 10S System eliminates the need for flame as in welding, no
cutting oil, chips or preparation time as with threading or flanging. Off-the-shelf stan-
dard ASTM A312 Schedule 10S stainless steel pipe is cut to size, inserted into the
coupling and the coupling is pressed onto the pipe and fitting in seconds.
The Vic-Press™ Schedule 10S System meets the hanging requirements of ASME
B31.1, B31.3 and B31.9.
Vic-Press™ Type 316 couplings and fittings are recommended for varying concentra-
tions of hot petroleum/water mixtures, hydrocarbons, air with oil vapors, vegetable
and mineral oils, as well as automotive fluids such as engine oil and transmis-
sion fluid within the temperature range of –20°F to +210°F/–29°C to +98°C. UL
Classified in accordance with ANSI/NSF 61 Annex G for cold (+86°F/+30°C) and hot
(+180°F/+82°C) potable water service for Grade H and Grade E seal materials. Unless
specifed otherwise, Grade "H" seals will be supplied. FM Approved to 175 psi/1200
kPa service for above ground sprinkler systems.
Vic-Press 316
For information pertaining to gasket seals for couplings, seals for Vic-Press™ products, O-rings for
Victaulic® Bolted Split Sleeve products and general definition/seal material Selection,
refer to publication 05.01.
For specific chemical and temperature compatibility, refer to the
Gasket Chemical Services Guide Long Report (GSG-100).
WARNING
• Before attempting to install any Vic-Press™ Schedule 10S System products,
carefully read and fully understand the “Vic-Press™ Schedule 10S Products
SECTION 6
damage, product damage, joint leakage, and/or joint failure.
Nominal
LOOSE SEALS Size Price Each †
Refer to publication 18.11 Standard Grade “H” HNBR or Grade “E” EPDM
inches Seal
Z\x $10.50 NR
C\v 11.50 NR
1 14.50 NR
1Z\x 18.50 NR
2 25.50 NR
† Specify choice clearly on order.
NR
Non-returnable
Style P507 STYLE P507 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
STANDARD COUPLING Size Weight Each Price Each †
Standard Grade “H” HNBR or
(P X P) inches lb Grade “E” EPDM Seal
Refer to publication 18.11 Z\x 0.2 $71.00
C\v 0.3 80.00
1 0.5 90.00
1Z\x 0.7 124.50
2 1.0 180.00
† Specify choice clearly on order.
Style P576 STYLE P576 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
MALE ADAPTER – THREADED Size Weight Each Price Each †
Standard Grade “H” HNBR or Grade “E”
(P X M) inches lb EPDM Seal
Refer to publication 18.11 Z\x x Z\x 0.3 $122.00
C\v x Z\x 0.4 127.50
C\v 0.4 127.50
1 0.5 146.50
1 x C\v 0.5 150.00
1 0.6 150.00
1Z\x x C\v 0.8 274.00
1Z\x 1.0 310.00
2 x 2 1.4 403.00
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P508 STYLE P508 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Approx.
SLIP COUPLING Nominal Weight
Size Each Price Each †
VIC-PRESS™ FOR SCHEDULE 10S
C\v
1 0.7 103.50
1Z\x 1.1 132.50
2 1.6 169.00
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Series P569 SERIES P569 – VIC-PRESS SCHEDULE 10S X VIC-PRESS SCHEDULE 10S (P X P)
Price Each
TYPE 316 STAINLESS STEEL Approx. Vic-Press x Vic-Press
Nominal Size Weight Each End to End (P X P) †
BALL VALVE WITH LOCKING
HANDLE Standard Grade “H”
HNBR or Grade “E”
Refer to publication 18.11 inches lb Inches EPDM Seal
Z\x 1.5 8.43 $496.00
C\v 2.4 8.63 577.00
1 3.6 9.22 693.50
1Z\x 6.9 10.11 1076.00
PxP
2 9.5 10.46 1443.00
SERIES P569 VIC-PRESS SCHEDULE 10S X GROOVED (P X G)
Price Each
Approx. Vic-Press x Grooved
Nominal Size Weight Each End to End (P X G) †
PxG
Standard Grade “H”
HNBR or Grade “E”
inches lb Inches EPDM Seal
C\v 2.4 8.72 $577.00
1 3.6 9.21 693.50
GxG 1Z\x 6.9 10.68 1076.00
2 9.5 11.60 1443.00
SERIES P569 GROOVED X GROOVED (G X G)
Approx.
Nominal Size Weight Each End to End Price Each
Grooved x Grooved
inches lb Inches (G X G)
C\v 2.4 8.81 $501.50
1 3.6 9.20 608.00
1Z\x 6.9 11.24 957.50
2 9.5 12.74 1270.50
Nominal
REPAIR KITS Size Price Each
Refer to publication 18.11 inches Type 316 Stainless Steel Ball Stem
SECTION 6
1Z\x 240.50 +
2 407.00 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Series P589 SERIES P589 – VIC-PRESS™ SCHEDULE 10S ENDS WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
VIC-PRESS™ SCHEDULE 10S Size Weight Each End to End Price Each †
SYSTEM BRASS BODY BALL Standard Grade “H”
VALVE HNBR or Grade “E”
inches lb Inches EPDM Seal
Stainless Steel Vic-Press™ Type 316 Z\x 1.0 9.03 $379.00
Schedule 10S Ends C\v 1.6 9.12 415.50
Refer to publication 18.11 1 2.8 10.11 498.00
1Z\x 4.7 11.18 816.50
2 6.9 12.69 1039.00
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P568 STYLE P568 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
90° ELBOW – SHORT TANGENT Size Weight Each Price Each †
Standard Grade “H” HNBR or
(P X P) inches lb Grade “E” EPDM Seal
Refer to publication 18.11 Z\x 0.3 $224.50
C\v 0.4 253.00
1 0.8 283.50
1Z\x 1.4 383.00
2 2.0 525.50
† Specify choice clearly on order.
Style P562 STYLE P562 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
90° STREET ELBOW Size Weight Each Price Each †
Standard Grade “H” HNBR or
(P X T) inches lb Grade “E” EPDM Seal
Refer to publication 18.11 Z\x 0.3 $224.50
C\v 0.4 253.00
1 0.7 283.50
1Z\x 1.4 383.00
2 2.0 525.50
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P571 STYLE P571 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
45° ELBOW Size Weight Each Price Each †
VIC-PRESS™ FOR SCHEDULE 10S
1 0.8 248.50
1Z\x 1.7 332.50
2 2.5 456.50
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P563 STYLE P563 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
45° STREET ELBOW Size Weight Each Price Each †
Standard Grade “H” HNBR or
(P X T) inches lb Grade “E” EPDM Seal
Refer to publication 18.11 Z\x 0.2 $206.50
C\v 0.4 222.00
1 0.8 248.50
1Z\x 1.7 332.50
2 2.5 456.50
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P572 STYLE P572 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
TEE Size Weight Each Price Each †
Standard Grade “H” HNBR or
(P X P X P) inches lb Grade “E” EPDM Seal
Refer to publication 18.11 Z\x 0.4 $484.00
C\v 0.5 523.00
1 0.9 548.00
1Z\x 1.5 645.50
2 2.1 796.50
† Specify choice clearly on order.
Style P573 STYLE P573 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
TEE – REDUCING BRANCH Size Weight Each Price Each †
SECTION 6
C\v 0.8 624.00
1Z\x x 1Z\x x Z\x 1.2 881.00
C\v 1.3 887.50
1 1.4 908.50
2 x 2 x Z\x 1.7 1029.50
C\v 1.7 1060.00
1 1.8 1181.00
1Z\x 2.0 1212.00
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P578 STYLE P578 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
TEE – REDUCING BRANCH Size Weight Each Price Each †
THREADED Standard Grade “H” HNBR or
inches lb Grade “E” EPDM Seal
(P X P X F) Z\x x Z\x x Z\x 0.4 $674.00
Refer to publication 18.11 C\v x C\v x Z\x 0.5 746.50
C\v 0.6 765.50
1 x 1 x Z\x 0.9 818.00
C\v 0.9 832.50
1 1.1 895.50
1Z\x x 1Z\x x Z\x 1.4 978.00
C\v 1.5 1013.00
1 1.5 1053.50
2 x 2 x Z\x 1.7 1078.50
C\v 1.7 1118.00
1 2.0 1184.50
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P574 STYLE P574 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
CONCENTRIC REDUCER Size Weight Each Price Each †
VIC-PRESS™ FOR SCHEDULE 10S
Style P575 STYLE P575 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
FLANGE ADAPTER Size Weight Each Price Each †
Standard Grade “H” HNBR or
(P X L) inches lb Grade “E” EPDM Seal
Refer to publication 18.11 Z\x 2.2 $880.00
C\v 2.3 895.50
1 2.8 916.50
1Z\x 3.6 1111.00
2 5.8 1234.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
Style P566 STYLE P566 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
FLANGE ADAPTER Size Weight Each Price Each †
(VAN STONE TYPE) Standard Grade “H” HNBR or
inches lb Grade “E” EPDM Seal
(P X L) Z\x 2.4 $303.00
Refer to publication 18.11 C\v 2.5 303.00
1 3.0 408.00
1Z\x 4.1 449.50
2 6.8 482.00
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Nominal Approx.
ADAPTER NIPPLE Size Weight Each Price
SECTION 6
2 0.9 222.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P585 STYLE P585 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
THREADED UNION ** Size Weight Each Price Each †
Standard Grade “H” HNBR or
(P X P) inches lb Grade “E” EPDM Seal
Refer to publication 18.11 Z\x 3.0 $728.50
C\v 3.7 839.50
1 4.3 1025.00
1Z\x 6.0 1694.50
2 6.8 2239.00
† Specify choice clearly on order.
** Grooved End Union - A grooved end union can be formed with two Style P587 (Type 304 stainless) transition nipples (see
above) and a variety of grooved end couplings equipped with varied gasket materials to meet service requirements. For stan-
dard ductile iron couplings, stainless steel couplings and gaskets refer to the Stainless Steel Products section.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P579 STYLE P579 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
FEMALE ADAPTER – THREADED Size Weight Each Price Each †
Standard Grade “H” HNBR or Grade “E”
(P X F) inches lb EPDM Seal
Refer to publication 18.11 Z\x x Z\x 0.3 $161.00
C\v x Z\x 0.3 168.00
C\v 0.4 170.00
1 x Z\x 0.7 179.00
C\v 0.6 189.50
1 0.6 199.50
1Z\x x 1 1.0 332.00
1Z\v 0.8 332.00
1Z\x 1.0 416.50
2 x 1Z\v 1.1 413.00
1Z\x 1.3 413.00
2 1.2 453.00
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Nominal Approx.
END CAP Size Weight Each Price
VIC-PRESS™ FOR SCHEDULE 10S
PFT510 The Vic-Press Schedule 10S System requires a tool specifically designed for products on off-the-shelf
standard ASTM A312 Schedule 10S stainless steel pipe. Refer to Pipe Preparation Tools section for prices
Vic-Press 10S Tool and where to call for purchase information.
NOTE: Victaulic Tool Discount will apply.
PFT510 Tool
Pipe Preparation
Tools
VE26 S/C
VE26 VE26 is designed for manual grooving of 2 – 6”/DN50 – DN150 steel, stainless steel, aluminum, PVC,
and copper tube.
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price
VE26S – Steel, Stainless Steel R100026VE0 22/25 $1032.00 $2216.00
VE26C – Copper Tube R200026VE0 22/25 1032.00 2216.00
VE26SS – Lightwall Stainless Steel R700026VE0 22/25 1032.00 2216.00
VE26P – Aluminum and PVC Pipe R750026VE0 22/25 1032.00 2216.00
For tool rating capacity please reference publication 24.01.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VE26/VE46 Power Power Drive Kit for the updated VE26 and VE46 In-Place Roll Grooving Tools allows for the VE26/VE46 to
alternately groove pipe using stationary power drive.
Drive Kit
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price
VE26/VE46 Power Drive Kit R075026KIT 7/9 N/A $411.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VE46
VE46 VE46 is designed for manual grooving of 3Z\x – 6”/DN90 – DN150 steel, stainless steel, aluminum and
PVC.
PIPE PREPARATION TOOLS
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price
SECTION 7
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE226 B/S/M/C/BSS/ VE226 is designed for use with a standard C\,”/DN10 square drive for roll feed with operator supplied
ratchet wrench to roll groove C\v – 6”/DN20 – DN150 steel, stainless steel, aluminum, PVC and copper
MSS/P † tube. Included are feeler gauges and allen wrench for depth stop setting. Built-on mount fits Ridgid
300® power drives (other drive mounts available, including Oster 310, Ridgid 535, Ridgid 1224 and
Ridgid 1822).
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price ^
VE226B – C\v – 1Z\x”/DN20 – DN40 R2022260FS 27/42 $1125.50 $2482.00
VE226S – 1Z\v – 6”/DN32 – DN150 R2002260FS 27/42 1125.50 2482.00
VE226M – 2 – 6”/DN50 – DN150 R3002260FS 27/42 1125.50 2482.00
VE226C – 2 – 6”/DN50 – DN150 R1002260FS 27/42 1125.50 2482.00
VE226BSS – C\v – 1Z\x”/DN20 – DN40 R00X2260FS 27/42 1125.50 2482.00
VE226MSS – 2 – 6”/DN50 – DN150 RXM02260FS 27/42 1125.50 2482.00
VE226P – 2 – 6”/DN50 – DN150 R6002260FS 27/42 1125.50 2482.00
† NOTE: When ordering tools that require a power drive, you must determine the type of drive to be used.
^ For proper operation, a power drive and pipe stand are required. See Accessories for details.
For tool rating capacity please reference publication 24.01.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VE226 Power Drive Kit Kit for connecting a VE226 Roll Grooving Tool to a Ridgid * 700 Power Drive.
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price
VE226 Power Drive Kit † R700226KIT 75/115 N/A $4035.50
† Drive unit not included.
* Ridgid™ is a trademark of Ridgid, Inc. Victaulic is not associated with Ridgid, Inc.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE206 VE206 portable roll grooving tool with a self-contained power drive provides capability of grooving
1Z\v – 6”/DN32 – DN150 pipe, up to and including Schedule 40. The tool requires 110V, 15-amp power
source. Tool is supplied complete with standard roll sets for steel 1Z\v” – 6”/DN32 – DN150 (4 – 6”/DN100 –
DN150 rolls are installed).
Tool Weight Tool
Tool Model Part Number lb List Price
VE206 – 110V with Ridgid* 700 Power Drive R000206MAS 244 $11561.50
VE206 – 110V without power drive unit R000206MA1 220 8259.00
* Ridgid™ is a trademark of Ridgid, Inc. Victaulic is not associated with Ridgid, Inc.
Other compatible power drive units are available upon request.
For tool rating capacity please reference publication 24.01.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE272SFS The VE272SFS portable roll groover mounts easily to the Victaulic Ridgid 300® Power Drive. The
VE272SFS is operated using a hand pump. A unique pivot arm design reduces handle effort. Roll
changes are quick and easy. The tool is supplied complete with 2 – 12”/DN50 – DN300 roll sets; 8 –
12”/DN200 – DN300 rolls are installed.
NOTE: Optional C\v/DN20 and 1 – 1Z\x”/DN25 – DN40 grooving rolls available.
Requires a Ridgid 300 power drive.
Tool Weight/
Shipping
Part Weight Rental Tool
Tool Model Number lb Per Month List Price
VE272SFS R000272SFS 184/250 $1774.00 $9434.50^
Optional Stabilizer (8 – 12”/DN200 – DN300 only) R4002720FS – 1774.00 2564.00
† NOTE: When ordering tools that require a power drive, you must determine the type of drive to be used.
^ For proper operation, a power drive and pipe stand are required. See Accessories for details.
For tool rating capacity please reference publication 24.01.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE268 † NOTE: All shop models shipped set for 220 power, unless specified otherwise. 3 phase requires tool
power to be hard wired by a local certified electrician.
Fully-motorized, semi-automatic, electro-hydraulic tool complete with safety guards, safety foot switch
and power cord. The VE268 requires a 220/440V, 3 phase, 60 hertz power supply for operation and is
equipped with a pipe stabilizer for 8 – 12”/DN200 – DN300 nominal pipe sizes to prevent pipe sway. The
tool is shipped fully assembled for standard grooving (2 – 12”/DN50 – DN300 pipe) * (8 – 12”/DN200 –
DN300 rolls are installed, unless otherwise specified).
NOTE: Optional C\v and 1 – 1Z\x” grooving rolls available.
Request RP-268 for power requirements or visit the Victaulic web site.
† These tools are rated for 220 volt service. They cannot be used with 208 volt service. For individual
amperage power requirements, refer to RP sheet supplied with tool. Each model may require
different incoming power requirements. (If your service is 208 volts, a “Boost and Buck Transformer” may
be required.)
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price
VE268 – 220V R000268VE0 735/766 $4244.50 $38318.00^
VE268 – 440V R000268VE4 735/766 4244.50 38318.00
^ For proper operation, a pipe stand is required. See Accessories for details.
For tool rating capacity please reference publication 24.01.
NOTE: ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Contact Victaulic for details.
Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP
(Plastic), RZ (EndSeal) will incur an additional rental charge per roll set.
† Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic.
* Refer to How to Order at the end of this section.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
^ Lower roll only.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Tool Accessories
VAPS112 Adjustable Pipe Stands are portable and self-standing units. Turnstile design allows pipe to be spun
around for grooving of both pipe ends without dismounting pipe from stand. Unique trough design
allows for rotational and forward/traverse movement. They are designed for direct use with roll grooving
tools: VE272SFS, VE268, VE270FSD.
Capacities: 1 – 12”/DN25 – DN300 IPS pipe †
Load Rating: 1075 lbs
Vertical Stroke: 14Z\x”/368.3 mm for adjusting rod; 8Z\x”/215.9 mm leg adjustment; 23”/584.2 mm total
Min. Pipe Height from Floor: 23”/584.2 mm on 12”/DN300 pipe; 21”/533.4 mm on 1”/DN25 pipe
Handle Effort Required to Raise 1800 lbs Load: 50 lbs Max.
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price
VAPS 112 R000112PS0 190/220 $1061.50 $7660.50
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Tool Rating Data in publication
24.01.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
PIPE PREPARATION TOOLS
SECTION 7
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
HCT908
HCT908 The HCT908 Hole Cutting Tool is a one-piece tool designed to cut holes up to 4Z\x” carbon and
stainless steel pipe. This allows for use of Mechanical-T, Strapless Outlet, Thermometer Outlet and Style
922 Outlet Tee. Requires 110 volt power supply to operate. For sizes over 2C\v”/70 mm or when speed
control is needed for various materials, use an inline speed controller to reduce hole saw wear and
improve performance.
Capacities: 1 – 2C\v”/DN25 – DN70 holes for Z\x – 2Z\x”/DN15 – DN76 Mechanical-T connections.
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price
HCT908 R000908HCT 35/48 $948.00 $4307.50
The 1” Arbor is optional. Hole saw blades available from Victaulic. See accessories below.
Vic-Tap II
Vic-Tap II * Parts A and B are designed for use with Vic-Tap II Mechanical-T units; (Part C) for tapping into systems
under pressure up to 500 psi.
Part “A” Includes drill guide base with extended shaft, arbor, pilot drill, 2C\,” hole saw, packing gland and
HP-70 Rigid Coupling for connection to Vic-Tap II.
Part “B” Includes drill motor with ground fault interrupt and clip-on feed wheel assembly.
Part “C” Vic-Tap II with 2Z\x” full port ball valve factory mounted. Available in sizes 4 x 2Z\x”, 5 x 2Z\x”, 6 x
2Z\x”, and 8 x 2Z\x”. Available for purchase only (parts not sold separately).
* Parts A & B can be purchased separately.
Shipping
Weight Rental
Tool Model Part Number lb Per Month List Price
Vic-Tap II - Parts A and B only R000902VT2 70 $5625.00 $12416.50
Part A only R100902VT2 – – 8469.50
Part B only R300901VT1 – – 8445.50
PIPE PREPARATION TOOLS
Part C †
4 x 2Z\x”/DN100 x DN65 R016931010 – – 2489.00
SECTION 7
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Vic-Press™ Tool
PFT510 The Vic-Press tool for ASTM A-312 Schedule 10S stainless steel pipe arrives in 2 carrying cases and
includes:
Case 1 – PFT510 Vic-Press tool, 2 batteries, 120 VAC charger, wire brush, and 1 tube of lubricant
Case 2 – Z\x”/DN15, C\v”/DN20, and 1”/DN25 jaws, 1Z\x”/DN40 and 2”/DN50 ring-jaws, ring-jaw adapter jaw,
insertion gauge set
WARNING: The PFT510 Vic-Press tool is designed for use only with Vic-Press Schedule 10S system
couplings, valves and fittings. Do not attempt to install Schedule 5 Carbon Steel Press products with this
tool. Failure to follow this instruction could cause system failure resulting in serious personal injury and
property damage. Refer to TM-PFT510 for complete tool operating instructions.
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb # Per Month List Price
PFT510 Vic-Press™ Tool – 110V R120510PFS 102 $1539.00 $11690.50
# Weight is for tool and complete set of jaws.
Contact Victaulic for Replacement Gauge Kit (R000501SET) pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
WARNING
• Always read and understand all operating and maintenance instructions before
attempting to use any Victaulic pipe preparation tools.Victaulic tool operating
and maintenance manuals can also be located at victaulic.com.
• Any Victaulic pipe preparation tools must be used by trained operators ONLY.
Operators that use Victaulic Pipe Cut-Off Tools must be knowledgeable in sound
welding and safety procedures.
Misuse of any equipment and lack of adherance to proper safety procedures may
result in serious personal injury, property damage, and/or product damage.
How to Order
How to Order When ordering tools or tool parts, please include the following information:
A. PARTS ORDERS
1. Tool Model Number. Example: VE272SFS.
2. Tool Serial Number. The serial number can be found on the tool name plate.
3. Part Number and Description. Example: Part #09, R-201-261-0FS, Pump.
4. Where to send the part(s). Company Name, Address and Telephone Number
5. Attention: Person’s Name
6. Purchase Order Number. Order parts from the nearest Victaulic Sales Office. Consult back cover of this Price List for locations.
B. TOOL ORDERS
1. Tool Model Number. Example: VE416FSD.
2. Tool Description. Example: VE416FSD Roll Grooving Tool.
3. Where to send the tool. Company Name, Address and Telephone Number
4. Attention: Person’s Name
5.Purchase Order Number. Order tool from the nearest Victaulic Sales Office. Consult back cover of this Price List for locations.
C. TOOL RENTAL ORDER
1. A completed and signed tool rental agreement.
2. Purchase Order Number.
3. Tool Model Number. Example: VE272SFS
4. Tool Description. Example: VE272SFS Roll Grooving Tool.
5. Where to send the tool. Company Name, Address and Telephone
6. Attention: Person’s Name. Order tool from the nearest Victaulic Sales Office. Consult back cover of this Price List for locations.
NOTES:
Aluminum pipe must consist of 6061-T4 or 6063-T4 alloys for roll grooving.
PVC grades that can be grooved – PVC Type I Grade I – PVC 1120; PVC Type I Grade II – PVC 1220; PVC Type II Grade I – PVC 2116.
Copper/nickel pipe - contact Victaulic for details.
Light weight stainless steel pipe (Sch. 10S and Sch. 5S) must be grooved using stainless Rx and RWX roll sets.
Note: tools and rolls shown on this chart will produce grooves in accordance with Victaulic Roll Groove Dimension charts and
to ANSI/AWWA C-606 standards.
SPECIAL NOTE: All roll grooving tools will be stocked with standard rolls only. No substitution will be done.
Optional rolls are available at an additional cost.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
amended, is commenced by or against the Lessee, or if the Lessee is adjudged insolvent, or if the Lessee makes any assignment for the benefit of his creditors,
or if a writ of attachment or execution is levied on any item or items of leased property and is not released or satisfied within 10 days thereafter, or if a receiver
is appointed in any proceeding or action, to which the Lessee is a party, with authority to take possession or control of any item or items of the leased property,
the Lessor shall have any may exercise any one or more of the remedies set forth in Paragraph 13 hereof; and this lease shall, at the option of the Lessor, without
SECTION 7
notice immediately terminate and shall not be treated as an asset of the Lessee after the exercise of said option.
15. Concurrent Remedies: The rights and remedies provided in this lease for the benefit of the Lessor shall be cumulative and shall not be exclusive but in addi-
tion to any other remedies to which the Lessor may be entitled. the Lessee waives trial by jury in any action or proceeding arising hereunder.
16. Lessor’s expenses: The Lessee shall pay the Lessor all costs and expenses, including attorney’s fees, incurred by the Lessor in exercising any of its rights or rem-
edies hereunder or enforcing any of the terms, conditions, or provisions hereof.
17. Binding Effect of Lease. This lease agreement shall inure to the benefit of and be binding upon the parties hereto and their respective heirs, executors,
administrators, personal or legal representatives, successors and assigns.
18. Applicable Law and Severability. This lease shall be governed by and construed under the laws of the State of Pennsylvania. If any provision herein is invalid,
it shall be considered deleted from this lease, and shall not invalidate the remaining provisions of this lease.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
WARRANTY
Standard product warranty applies. See Inside Back Cover.
NOTE: Reconditioned tools shall be warranted 30 days from date of purchase.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Victaulic maintains a continual policy of product improvement and, therefore, reserves the right to change product specifications, designs,
and standard equipment without notice and without incurring obligation.
Warranty, Victaulic Contact Information
Warranty
We warrant all products to be free from defects in materials and workmanship under normal conditions of use and service. Our obligation
under this warranty is limited to repairing or replacing at our option at our factory any product which shall within one year after delivery
to original buyer be returned with transportation charges prepaid, and which our examination shall show to our satisfaction to have been
defective.
THIS WARRANTY IS MADE EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE BUYER’S SOLE AND EXCLUSIVE REMEDY SHALL BE FOR THE REPAIR
OR REPLACEMENT OF DEFECTIVE PRODUCTS AS PROVIDED HEREIN. THE BUYER AGREES THAT NO OTHER REMEDY (INCLUDING, BUT NOT
LIMITED TO, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR LOST PROFITS, LOST SALES, INJURY TO PERSON OR PROPERTY OR ANY OTHER
INCIDENTAL OR CONSEQUENTIAL LOSS) SHALL BE AVAILABLE TO HIM.
Victaulic neither assumes nor authorizes any person to assume for it any other liability in connection with the sale of such products.
This warranty shall not apply to any product which has been subject to misuse, negligence or accident, which has been
repaired or altered in any manner outside of Victaulic’s factory or which has been used in a manner contrary to Victaulic’s
instructions or recommendations. Victaulic shall not be responsible for design errors due to inaccurate or incomplete
information supplied by Buyer or its representatives.
Items purchased by Victaulic and resold will have the original equipment manufacturer’s warranty extended to Victaulic customers.
EFFECTIVE FEBRUARY 5, 2018
COUPLINGS, FITTINGS, VALVES AND ACCESSORIES COUPLINGS, FITTINGS, VALVES AND ACCESSORIES