Beruflich Dokumente
Kultur Dokumente
Shutdown SIS
Previous Screen
i02652636
Illustration 1 g01332563
(1) Camshaft gear
(2) Idler gear
(3) Fuel injection pump gear
Note: If one or more of the gears need to be removed for repair, refer to Disassembly and Assembly, "Gear
Group (Front) - Remove" in order to properly remove the gears. Refer to the Disassembly and Assembly, "Gear
Group (Front) - Install" in order to properly install the gears.
1. Inspect the gears for wear or for damage. If the gears are worn or damaged, use new parts for replacement.
https://s1.remotelab.space:500/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage… 1/2
8/16/2019 C7.1 DE200E0/DE220E0 Generator Set GTY00001-UP(SEBP7395 - 11) - Documentation
Illustration 2 g01332564
2. Measure the backlash between the camshaft gear (1) and the idler gear (2). Refer to Specifications, "Gear Group
(Front)" for the backlash measurement.
3. Measure the backlash between the idler gear (2) and the crankshaft gear (4). Refer to Specifications, "Gear
Group (Front)" for the backlash measurement.
4. Measure the backlash between the fuel injection pump gear (3) and the idler gear (2). Refer to Specifications,
"Gear Group (Front)" for the backlash measurement.
5. Measure the end play on idler gear (2). Refer to Disassembly and Assembly, "Idler Gear - Install" for the correct
procedure. Refer to Specifications, "Gear Group (Front)" for the end play measurement.
https://s1.remotelab.space:500/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage… 2/2