Sie sind auf Seite 1von 226

Physics for the IB Diploma

Exam Preparation Guide

K. A. Tsokos

Cambridge University Press’s mission is to advance learning,


knowledge and research worldwide.

Our IB Diploma resources aim to:


• encourage learners to explore concepts, ideas and
topics that have local and global significance
• help students develop a positive attitude to learning in preparation
for higher education
• assist students in approaching complex questions, applying
critical-thinking skills and forming reasoned answers.
CAMBRIDGE UNIVERSITY PRESS
Cambridge, New York, Melbourne, Madrid, Cape Town,
Singapore, São Paulo, Delhi, Mexico City

Cambridge University Press


The Edinburgh Building, Cambridge CB2 8RU, UK

www.cambridge.org
Information on this title: www.cambridge.org/9781107602618

© Cambridge University Press 2012

This publication is in copyright. Subject to statutory exception


and to the provisions of relevant collective licensing agreements,
no reproduction of any part may take place without the written
permission of Cambridge University Press.

First published 2012


Reprinted 2013

Printed in India by Replika Press Pvt. Ltd

A catalogue record for this publication is available from the British Library

ISBN 978-1-107-60261-8 Paperback

Cambridge University Press has no responsibility for the persistence or


accuracy of URLs for external or third-party internet websites referred to in
this publication, and does not guarantee that any content on such websites is,
or will remain, accurate or appropriate.

This material has been developed independently by the publisher and the content is in
no way connected with nor endorsed by the International Baccalaureate Organization.

ACKNOWLEDGEMENTS

Thanks to the International Baccalaureate Organization for permission to reproduce its


intellectual property.

Cover image © Michael Dunning/Science Photo Library

The author would like to thank Anne Trevillion for her enormous help during the
preparation of this book.
Contents

Introduction vi Topic 6: Fields and forces – Core 32


Topic 1: Physics and physical measurement – Core 1 Comparing gravity and electricity 32
Units 1 The concept of a field 33
Uncertainties 2 Field patterns 34
Graphical analysis 3 Motion of charged particle in electric and magnetic fields 35
Getting straight-line graphs 4
Topic 7: Atomic and nuclear physics – Core 36
Estimating uncertainties in measured quantities 5
Atomic structure 36
Uncertainty in the measured value of a gradient (slope) 6
Atomic energy levels and nuclear structure 37
Vectors 7
Nuclear stability and radioactivity 38
Order of magnitude estimates 8
The radioactive decay law 39
Topic 2: Mechanics – Core 9 Mass defect and binding energy 40
Kinematics 9 Fission and fusion 41
Motion on a straight line – formulae and graphs 10
Topic 8: Energy, power and climate change – Core 42
Forces and Newton’s first law 11
Energy sources 42
Newton’s second law of motion 12
Fossil fuels 42
Newton’s third law of motion 13
Electricity production 42
Momentum, momentum conservation and impulse 14
Nuclear power 43
Work, energy and power 15
Problems with nuclear power 44
Uniform circular motion 16
Nuclear fusion 44
Topic 3: Thermal physics – Core 17 Solar power 45
Thermal concepts 17 Hydroelectric power 46
Calorimetry 18 Wind power 47
Energy changes during a phase change 18 Wave power 47
The kinetic model of gases 19 Radiation 48
The energy balance of the Earth and the greenhouse effect 49
Topic 4: Oscillations and waves – Core 20 Mechanisms for global warming 49
Simple harmonic motion (SHM) 20 Sea-level changes and feedback mechanisms 51
Oscillations with damping 21
What is a wave? 22 Topic 9: Motion in fields – AHL 52
Transverse waves 23 Motion in a uniform gravitational field 52
Longitudinal waves 24 Gravitational and electric potential 53
Wave phenomena 25 Equipotential surfaces 54
Superposition and interference 26 Gravitational and electric potential energy 55
Motion in a gravitational field 56
Topic 5: Electric currents – Core 27
Key ideas 27 Topic 10: Thermal physics – AHL 57
Power 28 Key ideas 57
Emf and series circuits 29 Thermodynamic processes 58
Parallel circuits 30 The first law of thermodynamics 58
The potential divider 31 Cycles in P–V diagrams and the second law 59
The second law of thermodynamics 59
Contents
iv

Topic 11: Wave phenomena – AHL and part Option B: Quantum physics and nuclear
of SL Option A 60 physics – SL (See Topic 13) 86
Standing waves 60
Option C: Digital technology – SL (See Topic 14
Waves on strings – fixed ends 60
and HL parts of Option F) 86
Standing waves in pipes 61
The Doppler effect 62 Option D: Relativity and particle physics – SL (See
Diffraction 63 under Options H and J) 86
Resolution 64
Option E: Astrophysics – SL and HL 87
Polarisation 65
Objects in the universe and stellar quantities – Core 87
Malus’ law 66
Radiation from stars – Core 87
Optical activity and stress analysis 67
Calculations with m and M: Cepheid stars – Core 88
Topic 12: Electromagnetic induction – AHL 68 Types of stars and stellar spectra – Core 89
Magnetic flux 68 The Hertzsprung–Russell diagram – Core 90
Faraday’s law 68 Distances in astronomy – Core 91
Lenz’s law 69 Worked examples of calculations in astrophysics:
Alternating current 70 hints and common mistakes – Core 92
Power loss in transmission 71 Cosmology – Core 93
The Big Bang – Core 94
Topic 13: Quantum physics and nuclear The fate of the universe – Core 95
physics – AHL and SL Option B 72
Stellar evolution – HL 96
The quantum nature of radiation 72
Evolutionary paths and the mass–luminosity relation – HL 97
Wave nature of matter 73
Hubble’s law – HL 98
The Bohr and Schrödinger models 74
The Heisenberg uncertainty principle and Option F: Communications – SL and HL 99
the particle in the box model 75 Signals, carriers and modulation – Core 99
Distance of closest approach 76 AM (amplitude modulation) – Core 99
The mass spectrometer 76 FM (frequency modulation) – Core 100
Nuclear energy levels 77 AM radio receiver – Core 101
Radioactivity 78 Binary numbers – Core 101
Digital transmission – Core 102
Topic 14: Digital technology – AHL and
part of SL Option C 79 Time division multiplexing (TDM) – Core 104
Binary numbers 79 Total internal reflection – Core 104
Analogue and digital signals 79 Optical fibres – Core 104
Analogue and digital storage devices 80 Dispersion, attenuation and noise – Core 105
The CCD 81 Channels of communication – Core 106
CCD characteristics 82 Satellite communications – Core 107
The operational amplifier (op-amp) – HL and SL Option C 107
Option A: Sight and wave phenomena – SL (See Reshaping digital pulses – the Schmitt trigger 109
also Topic 11) 83
The mobile phone system – HL and SL Option C 110
The eye 83
Sight 84
Colour and colour perception 85
Light and perception 85
Physics for the IB Diploma
v

Option G: Electromagnetic waves – SL and HL 111 Option J: Particle physics – SL Option D and HL 145
The nature of electromagnetic waves – Core 111 The standard model – SL Option D and HL 145
Rayleigh scattering – Core 111 Quarks – SL Option D and HL 145
Lasers (Light Amplification by Stimulated Emission of Quantum numbers – SL Option D and HL 146
Radiation) – Core 112 The Pauli and Heisenberg principles – SL Option D
Lenses – Core 113 and HL 147
The simple magnifier – Core 115 Interactions – SL Option D and HL 147
The compound microscope – Core 117 Feynman diagrams – SL Option D and HL 148
The telescope – Core 117 Virtual particles and gluons – SL Option D and HL 149
Lens aberrations – Core 118 Particle accelerators and detectors – HL 150
Two-source interference – Core 118 Detectors – HL 152
The diffraction grating – Core 119 Available energy – HL 153
X-rays – HL 120 More on lepton number – HL 153
Thin-film interference – HL 121 The experimental evidence for the standard model – HL 154
Applications of particle physics to cosmology – HL 155
Option H: Relativity – HL and SL Option D 123
String theories – HL 156
Frames of reference – SL Option D and HL 123
Time dilation and length contraction – SL Option D Exam-style questions 157
and HL 124
Simultaneity – SL Option D and HL 126 Physical constants 189
Experimental evidence for special relativity – HL 127
Masses of elements and selected isotopes 190
Velocity addition – HL 128
Relativistic mechanics – HL 129 Useful formulae and astronomical data 192
General relativity – HL 131
Gravitational time dilation – HL 132 Answers to Test yourself questions 193
Experimental evidence for general relativity – HL 133
Index 211
Curved spacetime – HL 134
Black holes: the extreme prediction of
general relativity – HL 135

Option I: Medical physics – HL 136


The parts of the ear and their functions 136
Sound intensity level 137
Audiograms and hearing loss 138
Medical imaging 139
X-ray imaging and Computed Tomography (CT) 140
Ultrasound 141
NMR and lasers 142
Lasers in medicine 142
Radiation in medicine 143
Radiation therapy for cancer 144
Comparing diagnostic to therapeutic uses 144

Contents
Introduction

This volume contains brief, concise and to the point coverage of the IB syllabus for Physics. This guide
follows the syllabus exactly for the core material and all the option topics. It is intended as a review in the
last few weeks before the IB exams. The book assumes that the student has undertaken a regular two year
course in IB Physics and is about to take the exam. It is not intended to replace a course textbook during the
two year course – it is however complete and can be used along with a textbook as a quick reference to the
various parts of the syllabus. For a more detailed and in depth coverage of the topics in this book the reader
is referred to the textbook Physics for the IB Diploma, Fifth edition, Cambridge University Press.

Using this book


Each topic includes Test yourself questions of a type similar to IB exam questions, with full answers and
explanations at the back of the book.

Before you answer


Many of these examples have a Before you answer comment. It is intended to give you a hint about
how to proceed by alerting you to the relevant law, principle or line of approach.

! On many occasions, there are comments about common mistakes that students make in solving various
problems and advice about how to avoid these pitfalls. These are in blue Helpful hint boxes.

1
Examiner tips are provided in pale green boxes.

Exam-style questions are included in a section at the end of the book. Answers are available at:
ibdiploma.cambridge.org.

Preparing for the examination


In preparing for the examination, make sure that you have seen as many past papers and mark schemes as
possible. It is important that you see mark schemes as well, so that you can understand how the examiners
will mark your paper. Past papers and mark schemes are not confidential information and should be made
readily available to you by your school.

Sitting the examination


During the examination itself, you must pay attention to the following points for each of the three papers
you will be examined on. For a start, make sure you have a ruler with you! It is a vital tool and will make life
easier for you.

Paper 1
• It is very important to really read the question carefully! Some of the questions are tricky and play on the
meaning of words.
• On many occasions most, if not all, of the four possible answers may be correct statements. But you
must choose the option that answers the question and not one that is merely a correct statement. When
compressing a gas, the molecules collide more frequently with each other, but that does not explain why
the pressure goes up.

Physics for the IB Diploma


vii

• Do not spend too much time on any one question. Remember that these are supposed to be questions
that you can answer quickly. Long algebraic or arithmetical calculations are unnecessary in this paper
and if you cannot get the answer quickly, the chances are that you will not get it even if you spend a
long time on the question.
• If you cannot choose the correct answer, see if you can eliminate those that are obviously wrong.
• Sometimes you can choose the correct answer just by checking the units of the answer. If you are
looking for a force, your chosen answer must have units of force!
• Do not leave any blank answers. Guess if necessary!

Papers 2 and 3
• Read the questions carefully and answer what is being asked. Perfect answers to questions that are not
being asked do not gain you any points.
• Pay attention to the action verbs. This determines the amount of detail required in the answer. If the
question says ‘state’, a simple sentence will do. An essay type answer is not required. If the question says
‘explain’ or ‘discuss’, a lot of detail is required. Feel free to answer the question in your own way and in
your own words. But don’t overdo it by including extra and irrelevant information. The examiner may
deduct points if you say something that is incorrect or contradictory to things mentioned elsewhere.
• Pay attention to the number of lines allotted to each question, which also determines to a large extent
the quantity to be provided in the answer.
• Watch your significant figures (round numbers at the very end and not in the intermediate stages of a
calculation) and don’t forget to include units for your final answer.
• Know your calculator well. The examination room is not the place to learn how to use a calculator.
• Know the definitions of key terms well. If you have to use an equation in lieu of a definition, do so, but
remember to define all the symbols appearing in the equation.
• The A1 question is a data-based question. Remember that a ‘line’ of best fit is not necessarily a straight
line.
• For all three papers, pay special attention to the axes of any graphs. Often, the units for a quantity are
expressed with a power of 10. Thus if the x co-ordinate of a point is 2.0 but the axis is labelled / × 10−3 m
the value you use is x = 2.0 × 10−3 m.
• This only applies to Paper 3. Do not plan to go to the exam hoping to answer questions on an option
that you have not studied or one that you have studied by yourself outside the classroom. Statistics
shows that these attempts are disastrous. Do the best you can with the option studied in your school
even if you do not find it interesting and you would have preferred to have studied something else.

K. A. Tsokos

Athens, December 2010

Introduction
TOPIC 1: Physics and physical measurement – Core

Units
Fundamental units
It is a fascinating fact that all physical quantities have units that can be expressed in terms of those for just
seven fundamental quantities (the IB syllabus uses only the first six). The seven fundamental quantities in
the SI system and their units are:

1 time second (s)


2 length metre (m)
3 mass kilogram (kg)
4 temperature kelvin (K)
5 quantity of matter mole (mol)
6 electric current ampere (A)
7 luminous intensity candela (cd)

Derived units
All other quantities have derived units, i.e. combinations of the fundamental units. For example, the
derived unit for force (the newton) is obtained using F = ma to be kg m s−2 and that for electric potential
J N m kg m s–2 m
difference (the volt) is obtained using W = qV to be = = = kg m2 s–3 A–1.
C As As

Significant figures
There is a difference in stating that the measured mass of a body is 283.63 g rather than 283.6 g. The
uncertainty in the first measurement is expected to be ±0.01 g and that in the second ±0.1 g, i.e. the first
measurement is more precise – it has more significant figures (s.f.). When we do operations with numbers
(multiplication, division, powers and roots) we must express the result to as many s.f. as those in the least
precisely known number in the operation.

Number Number of s.f. Scientific notation


34 2 3.4 × 101
3.4 2 3.4 × 10 0 or just 3.4
0.0340 zeros in front do not count but zeros at the end in a decimal do count 3 3.40 × 10−2
340 zeros at the end in an integer do not count 2 3.4 × 102

Thus the kinetic energy of a mass of 2.4 kg (2 s.f.) moving at 14.6 m s−1 (3 s.f.) is Ek = 1 × 2.4 × 14.6 2
2
= 255.792 J ≈ 260 = 2.6 × 10 2 J. Similarly, the acceleration of a body of mass 1200 kg (2 s.f.) acted upon by
a net force of 5250 N (3 s.f.) is 5250 = 4.375 ≈ 4.4 m s–2.
1200

Test yourself 1
The force of resistance from a fluid on a sphere of radius r is given by F = 6πηrv where v is the speed of the
sphere and η is a constant. What are the units of η?

Test yourself 2
The radius R of the fireball t seconds after the explosion of a nuclear weapon depends only on the energy E
2
released in the explosion, the density ρ of air and the time t. Show that the quantity Et ρ has units of m5
⎛Et 2
⎞ 1
and hence that R ≈ ⎝ ρ ⎠5 . Calculate the energy released if the radius of the fireball is 140 m after 0.025 s.
(Take ρ = 1.0 kg m−3.)

TOPIC 1: Physics and physical measurement – Core


2

Uncertainties
Definitions
Random uncertainties Uncertainties due to the inexperience of the experimenter and the difficulty
of reading instruments. They can be reduced by repeated measurements and taking an average of the
measurements.
Systematic uncertainties Uncertainties mainly due to incorrectly calibrated instruments. They cannot be
reduced by repeated measurements.
Accurate measurements Measurements that have a small systematic error.
Precise measurements Measurements that have a small random error.

We measure the length of the side of a cube to be 25 ± 1 mm. The 25 mm represents the measured value of
the length and the ±1 mm represents the absolute uncertainty in the measured value. The ratio 1 = 0.04 is
25
1
the fractional uncertainty in the length and 25 × 100% = 4% is the percentage uncertainty in the length.

ΔQ
In general for a quantity Q we have Q = Q0 ± ΔQ , = fractional uncertainty,
Q0
ΔQ measured value absolute uncertainty
× 100% = percentage uncertainty.
Q0

Suppose quantities a, b and c have been measured with uncertainties, respectively, Δa, Δb and Δc. If we use
these quantities to calculate another quantity Q, these uncertainties will cause uncertainties in Q. You need
to know these (approximate) rules for calculating the uncertainty in Q.
If Q = a ± b ± c, then ΔQ = Δa + Δb + Δc
I.e. for both addition and subtraction, add absolute uncertainties.
ab ΔQ Δa Δb Δc
If Q = , then = + +
c Q a b c

I.e for multiplication and/or division, add fractional or percentage uncertainties to get the fractional or
percentage uncertainty in the result.
ΔQ
= n Δa + m Δb
n
If Q = am , then
b Q a b

I.e. for powers, add fractional or percentage uncertainties, multiplied by their individual power.
ΔQ 1 Δa 1 Δb
If Q = ab or Q = a , then = +
b Q 2 a 2 b

I.e. for square roots and other roots, add fractional or percentage uncertainties and then divide by the
power of the root. This is a special case of the rule for powers.

Test yourself 3
V
The resistance of a lamp is given by R = . The uncertainty in the voltage is 4% and that in the current is
I
6%. What is the absolute uncertainty in a calculated resistance value of 24 Ω?
Test yourself 4
Each side of a cube is measured with a fractional uncertainty of 0.02. Estimate the percentage uncertainty in
the volume of the cube.
Test yourself 5
m
The period of oscillation of a mass m at the end of a spring of spring constant k is given by T = 2π k . What
is the percentage uncertainty of the period if m is measured with a percentage uncertainty 4% and the k with
a percentage uncertainty 6%?

Physics for the IB Diploma


3

Graphical analysis
Error bars
y
Suppose that we want to plot the point (3.0 ± 0.1, 5.0 ± 0.2) on a set of x- and y-axes. 0.2
First we plot the point with coordinates (3.0, 5.0) and then show the uncertainties as 5.2
error bars. The horizontal error bar will have length 2 × 0.1 = 0.2 and the vertical error
5.0 0.4
bar will have length 2 × 0.2 = 0.4.
4.8

Definition
Line of best fit The curve or straight line that goes through all the error bars.
x
0 2.9 3.0 3.1
! According to the IB, a ‘line’ may be straight or
y

curved and you must remember that. Do not


assume a ‘line’ to mean a straight line.
line of best fit

Finding slopes (gradients)


To find the slope of a curve at a particular point
x
draw the tangent to the curve at that point.
Choose two points on the tangent that are as 0 x
far apart as possible to form the ‘triangle’.

slope = 1.2 − 6.0 volt V / volt


2.0 × 10–2 − 0.0 m 6

= −2.4 × 102 V m–1 5

0 x / ×10–2 m
0 0.5 1 1.5 2

! Notice that the units on the horizontal axis in the graph are in terms of 10−2. Make sure you get the right
sign of the slope. Make sure you state its correct units.

Estimating areas under curves


To estimate the area under the curve in the graph on the right, draw the straight line from the point (0, 6) to the point
(4, 1.5). Each small square has area 0.5 × 0.5 = 0.25 square units. y
6
It is easy to find the area of the trapezium formed as (6 + 1.5) × 4 = 15.
2 5
Now count squares in between the straight line and the curve and subtract.
The number of squares in between is about 11 and so the required area is 4
about 15 − (11 × 0.25) = 12 square units. 3

! Use common sense – break up the area in order to


2

1
reduce the counting of squares whenever possible.
0 x
0 1 2 3 4

TOPIC 1: Physics and physical measurement – Core


4

Getting straight-line graphs


If we know the relationship between two variables we can usually arrange to plot the data in such a way that
we get a straight line. We must always bear in mind that the standard equation of a straight line is
y= m x + c
gradient vertical intercept
! We say that y is proportional to x if
where we plot the variable y on the vertical axis and the variable x on the horizontal. c = 0, i.e. if the straight line goes through
the origin. If the line of best fit is not
Consider the relationship T = 2π m for the period T of a mass m undergoing straight or does not go through the
k
oscillations at the end of a spring of spring constant k. Compare this relationship origin, then either reason is sufficient
with y = mx + c. to claim that y is not proportional to x.

T = 2π × m
k
↓ ↓
y = 2π × x
k
constants

By identifying T ↔ y and m ↔ x we get the equation of a straight line y = 2π x. So we must plot T on the
k

vertical axis and m on the horizontal axis to get a straight line whose gradient will be . Alternatively we
k
may write
2
T 2 = 4π × m
k
↓ ↓
2
y = 4π × x
k
constants

2
By identifying T 2 ↔ y and m ↔ x we get the equation of a straight line y = 4π x. So we must plot T 2 on the
k
4π2
vertical axis and m on the horizontal axis to get a straight line whose gradient will be .
k

A different procedure must be followed if the variables are related through a power relation, such as F = kr n
where the constants k and n are unknown. Taking natural logs (or logs with any base) we have

ln F = ln k + n × lnr
↓ ↓
y = ln k + n × x

and so plotting ln F against ln r gives a straight line with gradient n and vertical intercept ln k.

A variation of this is used for an exponential equation, such as A = A0e –λ t where A0 and λ are constants. Here
we must take logs to get ln A = ln A0 – λ t and so

ln A = ln A0 − λ × t
! Plot ln A on the vertical axis and t on
the horizontal so that we get a straight
↓ ↓
line with gradient −λ and vertical
y = ln A0 − λ × x intercept ln A0.

Physics for the IB Diploma


5

Test yourself 6
Copy and complete this table.

Equation Constants Variables to plot to give straight line Gradient Vertical intercept
P = kT k
v = u + at u, a
v = 2as
2
a
kq q k, q1, q2
F = 12 2
r
a = – ω 2x ω2
kq k, q
V=
r
2
T = 4π R G, M
2 3

GM
I = I0e –aT I0 , a

λ= h h, m, q
2mqV

F = av + bv2 a, b
1 m, ω 2, A
E = 2 mω 2 A2 – x2

1+1=1 f
u v f

Test yourself 7
State what variables must be plotted so that we get a straight line for the relation d = ch0.8 where c is
a constant.

Estimating uncertainties in measured quantities


The general simple rule is:
For analogue meters, take half of the smallest scale division. For example, for an ordinary
! Note that this is a conservative
metre rule the smallest scale division is 1 mm and so the uncertainty is ±0.5 mm. (But bear in approach. Someone may claim to
mind that if a metre rule is to be used to measure the length of say a rod, the uncertainty of be able to read to better precision
±0.5 mm applies to the measurement of each end of the rod for a total uncertainty of ±1 mm.) than this. See Test yourself 8.
For digital meters, take ± of the smallest division. For example, for a digital voltmeter that
can read to the nearest hundredth of a volt, the uncertainty is ±0.1 V. For an ammeter that can read to the
nearest tenth of an ampere take ±0.1 A.

Test yourself 8
Estimate the reading and the uncertainty in each of the instruments in the diagrams. 80

70

60

50

a b

TOPIC 1: Physics and physical measurement – Core


6

Uncertainty in the measured value of a gradient (slope)


To find the uncertainty in the gradient of the (straight) line of best fit, draw the lines of maximum and
minimum gradient. Calculate these two gradients, mmax and mmin. A simple estimate of the uncertainty in the
m − mmin
gradient is then max .
2

Test yourself 9
Electrons that have been accelerated by a potential difference V enter a region of Radius r / cm Potential r 2 / cm2
magnetic field where they are bent into a circular path of radius r. Theory suggests ±0.1 cm difference V / V
4.5 500 ±
that r 2 = 2m2 V. The table shows values of the radius r and potential difference V
qB 4.9 600 ±
obtained in an experiment.
5.3 700 ±
5.7 800 ±
a Explain why a graph of r 2 against V will result in a straight line.
6.0 900 ±
b State the slope of the straight line in a in terms of the symbols m, q and B.

c Copy the table and complete the right column by inserting values of the radius squared including the
uncertainty.

The graph shows the data points plotted on a set of axes.

40

35
Radius2 / cm2

30

25

20

15 V/V
400 600 800 1000

d Trace the graph and then draw error bars for the first and the last data points.

e Draw a line of best fit for these data points.

f Calculate the gradient of the line of best fit including its uncertainty.

The magnetic field used in this experiment was B = 1.80 × 10–3 T.

g Calculate the value of the charge to mass ratio ⎝


⎛ q ⎛ for the electron that this experiment gives. Include
m⎝
the uncertainty in the calculated value.

Physics for the IB Diploma


7

Vectors
Definitions
Vectors Physical quantities that have both magnitude and direction. They are represented by arrows and
written in bold italics. The length of the arrow gives the magnitude of the vector. The direction of the arrow
is the direction of the vector. (Vectors can be positive or negative.)
Scalars Physical quantities with magnitude but not direction.

Vectors Scalars
displacement distance
velocity time/mass
acceleration energy/work/power
force temperature
momentum/impulse electric current/resistance
electric/gravitational/magnetic fields electric/gravitational potential

Adding vectors Have a and b start at the same point, O. Draw the
b
parallelogram whose two sides are a and b. Draw the diagonal b+a
starting at O. O
a

Subtracting vectors Have a and b start at the same point, O. b–a


To find b – a draw the vector −a and then add b to −a.

b
Components of vectors –a
As the diagrams show, the O

component adjacent to the angle θ


R
involves cos θ and that opposite to θ
F
involves sin θ. Follow the three stages: F sin
draw the forces, add the axes, get T mg sin mg cos
T cos
the components. Choose as one of F cos
your axes the direction in which the T sin
body moves or would move if it could. mg

Test yourself 10
A river is 16 m wide. The diagram shows a boat travelling at 4.0 m s−1 with
respect to the water when the current has a speed of 3.0 m s−1 with respect to required path
of boat
the shore and is directed to the right. The boat is rowed in such a way so as
16 m
to arrive at the opposite shore directly across from where it started. Calculate
the time taken for the trip. current

TOPIC 1: Physics and physical measurement – Core


8

Order of magnitude estimates


The tables below give values for various distances, masses and times. You are not required to know these by
heart but you must have a general idea of the size, mass and duration of various quantities and processes.
Use the information in these tables to answer the questions which follow.

Length / m Mass / kg
26
radius of the observable universe 10 the universe 1053
distance to the Andromeda galaxy 1022 the Milky Way galaxy 1041
21
diameter of the Milky Way galaxy 10 the Sun 1030
distance to Proxima Centauri (star) 1016 the Earth 1024
diameter of solar system 1013 Boeing 747 (empty) 105
11
distance to Sun 10 an apple 0.2
7
radius of the Earth 10 a raindrop 10−6
size of a cell 10−5 a bacterium 10−15
size of a hydrogen atom 10−10 mass of smallest virus 10−21
−15
size of an average nucleus 10 a hydrogen atom 10−27
Planck length 10−35 an electron 10−30

Time / s
age of the universe 1017
time of travel by light to nearest star (Proxima Centauri) 108
one year 107
one day 105
period of a heartbeat 1
period of red light 10−15
time of passage of light across an average nucleus 10−23
Planck time 10−43

Test yourself 11
Estimate the weight of an apple.
Test yourself 12
Estimate the number of seconds in a year.
Test yourself 13
Estimate the time taken by light to travel across a nucleus.
Test yourself 14
Estimate the time in between two of your heartbeats.
Test yourself 15
Estimate how many grains of sand can fit into the volume of the Earth.
Test yourself 16
Estimate the number of water molecules in a glass of water.
Test yourself 17
If the temperature of the Sun were to increase by 2% and the distance between the Earth and the Sun were ! T4
to decrease by 1%, by how much would the intensity of the radiation received on Earth change? I∝
d2

Physics for the IB Diploma


TOPIC 2: Mechanics – Core

Kinematics
Definitions
Displacement The vector r from some arbitrary fixed point to the position of a particle,
i.e. the distance in a given direction.
Δr
Average velocity The ratio of the change of the displacement to the time taken, .
Δt
This vector has the same direction as Δr.
d
Average speed The ratio of the total distance travelled d to the total time t taken, .
t

! The average speed is not, in general, related to the magnitude of the average velocity.

lim Δr
Instantaneous velocity The rate of change with time of the displacement vector, v = Δt → 0 Δt .
Instantaneous velocity is along the tangent to the path.
lim Δd
Instantaneous speed The rate of change with time of the distance travelled: speed = Δt → 0 Δt .
It is equal to the magnitude of the instantaneous velocity vector.
Δv
Average acceleration The ratio of the change of the velocity vector to the time taken, .
Δt
This vector is in the same direction as Δv.
lim Δv
Instantaneous acceleration The rate of change with time of the velocity vector, a = Δt → 0 Δt .

change in
displacement
new
velocity
! The diagram shows the difference between
velocity
displacement (blue curved line) and change
new
in displacement. The direction of velocity
path displacement (red arrows) is at a tangent to the path. The
displacement
average speed is always equal to or greater
O than the magnitude of the average velocity.
fixed point

Test yourself 1
The diagram shows a particle moving around a circle with constant speed.
The displacement of the particle is measured from point O, the position
of the particle at t = 0. Draw a graph to show how the magnitude r of the
displacement vector varies with time for one complete revolution. r

Before you answer


What is the displacement initially?
O
Does it reach a maximum value?

Test yourself 2
The diagram shows a particle which takes 5.0 s to move along a semicircle
of radius 5.0 m. Calculate the average velocity and average speed.

Before you answer


Make sure you understand the difference between
average speed and average velocity.

TOPIC 2: Mechanics – Core


10

Motion on a straight line – formulae and graphs


The basic formulae for motion on a straight line with constant acceleration are
! If the acceleration is not constant we
shown below. These formulae can only be used when we have constant must rely on analysis of graphs.
acceleration and motion on a straight line.

The equations of motion


v = u + at u = initial velocity
1
s = ut + 2 at2 v = velocity after time t
v2 = u2 + 2as s = displacement
s = ⎛⎝u + v ⎛⎝ t t = time elapsed
2

Graphs
• Slope of displacement–time graph gives the velocity.
• Slope of velocity–time graph gives the acceleration.
• Area under velocity–time graph gives the change in displacement.
• Area under acceleration–time graph gives the change in velocity.

Relative velocity
Imagine two objects, A and B, whose velocities as measured by the same
observer are vA and vB. We define the relative velocity of B with respect to A as vB|A = vB – vA.

vbird vbird|cyclist vbird


The first diagram shows the velocities with respect to
the ground of the bird and the cyclist.

The second diagram shows the relative velocity of the


bird with respect to the cyclist is vbird|cyclist = vbird – vcyclist.
vcyclist –vcyclist

Test yourself 3
An object starts from rest and accelerates with constant acceleration.
Before you answer
It covers a distance of 20 m in 5.0 s. The speed after 5.0 s is
You need a formula without acceleration.
A 2.0 m s−1 B 4.0 m s−1 C 8.0 m s−1 D 10 m s−1
v / m s–1
Test yourself 4 1.0
The graph shows the variation with time of the speed of a particle. 0.8
a Calculate the instantaneous acceleration at 2.0 s.
0.6
b Draw a sketch graph to show the variation with time of
the acceleration of the particle. 0.4

c Estimate the displacement at 6.0 s (assume zero initial 0.2


displacement). 0 t/s
0 1 2 3 4 5 6

Test yourself 5 a / m s–2


10
The graph shows the variation with time of the acceleration of
a particle. The particle starts from rest. Determine its velocity 8

after 5.0 s. 6

0 t/s
0 1 2 3 4 5

Physics for the IB Diploma


11

Forces and Newton’s first law


Definitions
Force An unbalanced force causes acceleration of the body on which the force acts. The SI unit of force is
the newton.
Representation of forces Forces, being vectors, are represented by arrows whose length is the magnitude
of the force. The direction of the arrow gives the direction of the force.
Net (resultant) force This is the single force whose effect is the same as the combined effect of all the
individual forces on the body. This force is found by vector addition.
Maximum and minimum magnitude of net force The resultant of two forces of magnitude say 5 N and
7 N can have a magnitude of at most 12 N if the forces are in the same direction and 2 N if they are opposite.
In any other case the force is in between these extremes. The net force can never be less than 2 N nor greater
than 12 N.
The first law of mechanics When the net force on a body is zero the body moves with constant velocity.
It is impossible to do an experiment that will determine what your velocity is if you are in a closed box
moving at constant velocity. (You cannot look outside.)
Equilibrium The situation when the net force on a body or system is zero.
Example
A block of weight 100 N is suspended by two strings of unequal length as shown in the diagram. Estimate
the tension in each string. The arrow shown represents the tension in the vertical string.

Before you answer


Do you know the tension in the vertical string?

TR

TL

The two tensions must have a resultant equal and opposite to the weight
of the block. This is shown by the dotted arrow in the diagram. Drawing
dotted lines parallel to the strings we find the tensions. Measuring each
with a ruler and comparing to the length of the arrow representing the
weight we find approximately TL ≈ 50 N and TR ≈ 83 N.

Test yourself 6
An elevator is moving downward at constant velocity. A person drops a ball from rest. Will the time it takes
the ball to hit the elevator floor be less than, equal to, or larger than the time the ball would have taken in an
elevator at rest?

Before you answer


You can solve the problem either by looking at things from the point of view of the observer inside
the elevator or from the point of view of an observer outside. Choose one.

TOPIC 2: Mechanics – Core


12

Newton’s second law of motion


The net force on a body of constant mass is equal to the product of the mass ! It is important to realise that the force
and the acceleration of the mass, Fnet = ma.
and the acceleration are in the same
In all mechanics problems: direction.
• Draw a diagram.
• Draw a free body diagram showing the forces on each body.
• For each body, find the net force in terms of the forces acting on each body.
• Use Newton’s second law separately on each body or treat all bodies as one if convenient.

Test yourself 7
The diagram shows a block of mass M is on a horizontal, frictionless table which is connected by a string
to a smaller mass m that hangs from the string. If m is released, find the acceleration and the tension in
the string.

Before you answer


You can save time if you consider the two bodies as one of mass M + m.
In this case what is the net force on the whole system?
Is the tension relevant if you consider the two bodies as one?
If you have to find the tension as in this example, find the acceleration
first treating the bodies as one, and then treat them as separate.

Test yourself 8
The diagram shows five identical blocks which are connected by four strings A, B, C and D. Force F acts on
the front block. Friction is negligible.

A B C D F

In which string is the tension the greatest?

Test yourself 9
The diagram shows a force of 60 N being applied to the body of mass 12 kg. A string joins this body to
another body of mass 8.0 kg. Calculate a the acceleration and b the tension in the string. (Friction is to be
ignored.) c How would your answers to a and b change (if at all) if the order of the blocks was reversed?

F = 60 N

8.0 kg 12 kg

There are now frictional forces between both blocks and the ground. The frictional force on the 8.0 kg block
is 24 N. The pulling force of 60 N cannot get the blocks to move. Calculate d the tension in the string and
e the frictional force on the 12 kg block.

Physics for the IB Diploma


13

Newton’s third law of motion


If a body A exerts a force on body B, then B will exert on A 1
This is often remembered as ‘for every action
an equal and opposite force.
there is an equal and opposite reaction’ but
• A tennis racket comes into contact with a tennis ball and
you should not quote this in an exam!
exerts a force on the ball. The ball will exert an equal and
opposite force on the racket.
• The weight of a body is the force that the Earth exerts on the body. The force is directed vertically
downwards. Therefore the body exerts at the centre of the Earth an equal and opposite force, i.e. a force
of the same magnitude upwards.
• A rocket exerts a force on the exhaust gases pushing them backward. The gases exert an equal force on
the rocket pushing it forward.
• A helicopter rotor exerts a force on air pushing air downwards. The air exerts an equal, upward force on
the rotor.

Test yourself 10
A girl stands on a weighing scale inside an elevator that accelerates vertically upwards. The forces on the girl
are her weight W and the reaction force from the scale R. The reading of the scale is
A R+W B W C R D R−W

Before you answer ! Two forces that are equal and opposite are not necessarily the
The scale reads the force exerted on it. ‘action–reaction’ pair of the law.
The forces mentioned in Newton’s third law act on different bodies.
Test yourself 11
The diagram shows a block on a wedge of angle θ to
the horizontal. F

A horizontal force F is applied to the wedge


accelerating it forward. The block does not move
F
relative to the wedge. Show that tan θ = W where W is the combined weight of the wedge and the
block. (There is no friction between the block and the wedge or the wedge and the ground.)

Test yourself 12
The diagram shows a body of mass m on the floor of an elevator Before you answer
that is accelerating upwards with acceleration a. Derive an expression Is the reaction force equal to the weight?
for the reaction force from the floor on the block in terms of m, g and a.

! Assume that the body is actually resting on a scale. Then R is the force that the scale exerts on the body. By
Newton’s third law the force the body exerts on the scale is also R in magnitude. But the scale reads the force
acting on it, i.e. R. So if the elevator is accelerating, the scale does not read the weight of the body.

TOPIC 2: Mechanics – Core


14

Momentum, momentum conservation and impulse


Definitions
Momentum The product of the mass and the velocity of a body, p = mv. It is a vector with the same
direction as that of velocity.
Impulse The product FΔt, i.e. the average force on ! Impulse equals the change in momentum
the body multiplied by the time for which the force was acting.
of a body. Impulse is a vector.
Impulse is the area under the curve in a graph of F against t.

Δp
The second law in terms of momentum Fnet = . The usefulness of this formula is that it can be
Δt
applied when the mass varies. In those cases where the mass of a body (or system) is constant this law
Δp Δv
becomes the usual Fnet = ma, since Fnet = =m = ma.
Δt Δt
Conservation of momentum When the resultant (net) external force on a system is zero, the total
momentum of the system stays constant.

Proof of momentum conservation


Δp
Let a system have total momentum p. Then by Newton’s second law, Fnet = where Fnet is the net external
Δt
force on the system. If Fnet = 0, it follows that Δp = 0, i.e. the total momentum stays constant.

Test yourself 13
A ball of mass 0.20 kg moving at 4.0 m s−1 collides with a vertical wall. It rebounds with
a speed of 2.5 m s−1. The ball was in contact with the wall for 0.14 s. Calculate a the
magnitude and direction of the change in momentum of the ball, b the magnitude of
the average force on the ball and c discuss whether the law of momentum conservation
applies to this situation. d The same ball now falls vertically on the floor. The impact and
rebound speeds are the same. State and explain whether the reaction force from the floor
on the ball is different from the answer in b.

Before you answer


Is the velocity before collision 4.0 m s−1 or −4.0 m s−1?
Momentum is a vector. There is a very common error that is made at this point.

Test yourself 14
A rocket of mass 120 kg contains an additional 80 kg of fuel. Gases from the
burned fuel leave the rocket with a speed of 3.0 × 102 m s−1, relative to the
rocket, at a rate of 2.2 kg s–1. The rocket is initially at rest in outer space.
Before you answer
a Calculate the force exerted on the gases. b Explain why the rocket accelerates.
What is the force exerted on the gases?
c Calculate the initial acceleration of the rocket.

Test yourself 15
A projectile moving horizontally collides elastically with a vertical steel plate. F/ N
During contact with the plate the force on the projectile varies with time as 120

shown on the graph. Calculate a the duration of the contact, b the impulse 100
delivered to the ball, c the average force on the projectile. d Given that the 80
speed of the projectile before and after the collision was 18 m s−1, calculate 60
its mass.
40

Before you answer 20


What does the area under the curve tell you? 0 t / ms
0 1 2 3 4

Physics for the IB Diploma


15

Work, energy and power


For motion along a straight line and a constant force, the work done by a force is the product of the
magnitude of the force and the distance travelled in the direction of the force, W = Fd cos θ, where θ is the
angle between the force and the direction of motion. Work is a scalar quantity.

! If the force is not constant you cannot use this formula. The work is then the area under the
force–distance graph. Make sure you understand which force you want to find the work of. Some
questions ask for work done without specifying the force, so you must be careful.

Definitions
Energy The ability to work. Energy is a scalar quantity. In mechanics we deal with the following forms of
mechanical energy.
1 2
Kinetic energy EK = 2 mv2 (another formula for kinetic energy using momentum is EK = p )
2m
Gravitational potential energy EP = mgh, where the height may be measured from any horizontal level.
1
Elastic potential energy of a spring EE = 2 kx2 (k is the spring constant.)
1 1
Total mechanical energy The sum of all forms of mechanical energy: ET = EK + EP + EE = 2 mv2 + mgh + 2 kx2
Conservation of energy Total energy, mechanical and otherwise, cannot be created or destroyed. It
only gets transformed from one form into another. In a system where no resistance / frictional / dissipative
forces act the total mechanical energy stays the same. If such forces do act, then the mechanical energy gets
transformed into other forms of non-mechanical energy, for example thermal energy. The work done by
these forces is the change in the total mechanical energy of the system.
Elastic collisions Collisions in which the total kinetic energy before and after the collision is the same.
Power Power is the rate at which a force does work (or rate at which energy is being consumed), i.e.
1
ΔW
P= . Power is measured in joules per second, i.e. in watt (W). If a constant force F acting on a body moves You must
Δt
ΔW F × Δs know how to
the body at speed v along a straight line then the instantaneous power developed is P = = = Fv.
Δt Δt derive P = Fv
The work kinetic energy relation The work done by the net force on a body is equal to the change in the
in an exam.
body’s kinetic energy, Wnet = ΔEK

Test yourself 16
A force of magnitude 20 N pushes a body along a horizontal circle of radius Before you answer
5.0 m at constant speed. The direction of the force is tangent to the circle. What angle does the force make with the
Calculate the work done by this force after completing one full circle. direction of motion? Does the definition of
work involve distance or displacement?
Test yourself 17
The work done in extending a spring from its natural length to an extension e is W.
Before you answer
The work done in extending the same spring from an extension e to an extension 2e is
How does the work done
A W B 2W C 3W D 4W depend on extension?

Test yourself 18
A body of mass 5.0 kg and speed 3.0 m s−1 collides head on with a stationary block Before you answer
of mass 7.0 kg. The two blocks stick together. Calculate the common speed of the Collision ⇒ momentum conservation.
two blocks after the collision. Why is this collision not elastic?

Test yourself 19
A body of initial kinetic energy 48 J moves on a horizontal straight line. It is brought to rest by a constant
frictional force of 6.0 N. Calculate the distance travelled until the body stops.
TOPIC 2: Mechanics – Core
16

Uniform circular motion


It is convenient to measure displacement from the centre of the circle.
Q
The displacement at P and that at Q have the same magnitude but their directions
are different.
O change in
The velocity at P and that at Q have the same magnitude but their directions displacement
are different. P

Therefore we have acceleration. The direction of acceleration is the same as the direction of the change in
velocity.
v

! The particle is going around a circle with constant speed. Even though the speed is constant, the direction
of the velocity is always changing so we have acceleration.

2
The acceleration has magnitude vr and is directed towards the centre of the circle. This means that the
net force on the particle must be directed towards the centre of the circle. This is the centripetal force that
provides the centripetal acceleration.

Examples of circular motion:


• A car taking a circular bend (the force is provided by friction between the road and the tyres)
• The Earth revolving around the Sun (the force is provided by the gravitational attraction between the
Earth and the Sun)

An alternative formula for the centripetal acceleration


In circular motion the time for a complete revolution is called the period T. The inverse of the period is the
frequency f. ⎛2πr⎞2
2 ⎝ ⎠ 2
Then v = 2πr and so a = vr = Tr = 4π2r = 4π2rf 2
T T

Test yourself 20
L
The diagram shows a block of mass m held horizontal at the end of a
block is
string of length L. The block is released. What is the tension in the string
released here
as it moves past the vertical position?

Before you answer


Is the block in equilibrium as it moves past the vertical position?
Is the block moving in a straight line or a circle? You must use
Newton’s second law (since you are looking for a force) but you will
also need conservation of energy.

Physics for the IB Diploma


TOPIC 3: Thermal physics – Core

Thermal concepts
Definitions
The absolute temperature scale A temperature in which the lowest possible temperature is zero degrees.
The Kelvin (absolute) and Celsius scales are related by T(K) = t(°C) + 273.
Absolute temperature and random kinetic energy of molecules The average random kinetic energy
of the molecules of a substance is proportional to the absolute temperature of the substance. Thus, at zero
absolute temperature the random kinetic energy of the molecules becomes zero (in classical, i.e. non-
quantum, physics).
Internal energy, U The sum of the total random kinetic energy of the molecules and their intermolecular
potential energy. (Internal energy also includes chemical energy and nuclear energy but we do not consider
these in this topic.) It is customary to call the part of the internal energy dealing with total random kinetic
energy of the molecules and the intermolecular potential energy the thermal part of the internal energy, or
just thermal energy.
Intermolecular forces There are forces (electromagnetic in origin) between
any two molecules in any substance whether solid, liquid or vapour. The forces
! In the case of an ideal gas these forces are
are strongest in the solid phase and weakest in the vapour. Because of the zero and so internal energy only consists
intermolecular forces, increasing the separation of molecules demands work of random kinetic energy.
to be done. This work increases the intermolecular potential energy, and
hence the internal energy of the substance.
Heat, Q, is ‘energy in transit’ Energy that is transferred from one body to ! We cannot speak of the ‘heat content’ of
another due to a difference in temperature. a body.
Direction of energy flow Thermal energy, on its own, always gets
transferred from a high temperature region to a lower temperature region. When two
bodies are at the same temperature they are said to be in thermal equilibrium and no further net energy gets
transferred between them.
The mole The SI unit for quantity. One mole of any substance contains the
same number of molecules. This number is known as Avogadro’s number and
! The mass number of an element is its
equals NA = 6.02 × 1023. The mass in grams of one mole of a substance is known approximate molar mass (in grams).
as the molar mass.
Thus for 238 4
92U the molar mass is 238 g and for 2He it is 4 g. To find the molar mass of a compound we need to
know the chemical formula for that compound. Thus, for water we have the formula H2O. The molar mass of
hydrogen (11H) is 1 g and that of oxygen (168O) is 16 g. Hence the molar mass of water is 2 × 1 + 16 = 18 g.

Test yourself 1
The molar mass of lead is 207 g mol−1 and its density is 1.13 × 104 kg m−3.
Estimate the average separation of lead atoms.

Before you answer


Try to understand and justify the diagram. Each dotted square a
represents a cube with one lead atom at its centre.

Test yourself 2
The temperature of a liquid changes from 22 °C to 32 °C. What is the change in temperature of the liquid and
what is its final temperature in kelvin?

TOPIC 3: Thermal physics – Core


18

Calorimetry
Definitions
Specific heat capacity, c The energy required to change the temperature of a unit mass by one degree.
Thermal capacity, C The energy required to change the temperature of a body by one degree. Its units are
J K−1. Thermal capacity of a body of mass m is related to specific heat capacity through: C = mc.
Change of phase Substances undergo phase changes at specific, constant temperatures. For example, ice
will melt into water at 0 °C (melting point) and water will boil into steam at 100 °C (boiling point).
Specific latent heat The energy required to change the phase of a unit mass at 1
constant temperature. When a quantity Q of energy is supplied to a body of mass m Note that you must mention that
at its melting or boiling point: Q = mL. Here the constant L is the specific latent heat temperature is constant in this
of fusion (if melting) or vaporisation (if boiling). definition.

When a quantity Q of heat is supplied to a body of mass m and there is no change of phase, the body’s
temperature will increase by Δθ. Q = mcΔθ. Here the constant c is the specific heat capacity.
For water, c = 4200 J kg−1 K−1. So to change the temperature of 2.0 kg of water by 15 °C we require
Q = 2.0 × 4200 × 15 ≈ 126 kJ.
Energy changes during a phase change
A solid can melt into a liquid and a liquid can boil into vapour. The reverse processes are a liquid
freezing into a solid and vapour condensing into a liquid. These are phase changes and occur at a
constant temperature.

Let us calculate the energy required to change 2.0 kg of ice at −15 °C to liquid water at +15 °C.

To increase temperature of ice from −15 °C to 0 °C Q = mcΔθ


(cice = 2100 J kg−1 K−1) = 2.0 × 2100 × 15 ≈ 63 kJ
To melt 2.0 kg of ice at 0 °C to liquid water at 0 °C Q = mL
(the specific latent heat of fusion of ice: L = 334 kJ kg−1) = 2.0 × 334 ≈ 670 kJ
To increase temperature of melted ice (which is now liquid water) Q = mcΔθ
from 0 °C to 15 °C = 2.0 × 4200 × 15 ≈ 126 kJ
Thus we require a total of about 860 kJ.

Test yourself 3
A 80 g piece of aluminium (c = 900 J kg−1 K−1) at 250 °C is dropped into 0.75 kg Before you answer
water (c = 4200 J kg−1 K−1) at 15 °C in a calorimeter. The thermal capacity of the Give a symbol to represent the final temperature.
calorimeter is C = 180 J K−1. Estimate the final temperature of the water. What loses energy and what gains energy?

Test yourself 4
A sample of 120 g of solid paraffin initially at 20 °C is being heated by a heater of T / °C
60
constant power. The specific heat capacity of solid paraffin is 2500 J kg−1 K−1.
The temperature of paraffin varies with time as shown. 50
Use the graph to determine a the power of the heater, b the melting temperature of
40
paraffin, c the specific latent heat of fusion of paraffin and d the specific heat capacity of
paraffin in the liquid phase. e Explain why the temperature of paraffin stays constant 30
during melting.
20 t/s
0 100 200 300 400 500 600
Before you answer
What does internal energy consist of?

Physics for the IB Diploma


19

The kinetic model of gases


Pressure
A gas is a very large collection of molecules with distances between molecules that, on average, are about
10 times as large as in the solid and liquid phase. An ideal gas is an idealised form of gas that obeys the
assumptions:
• Molecules are hard spheres of negligible radius and volume.
• Collisions (between molecules and between molecules and walls) are elastic.
• Duration of collisions is short.
• There are no forces between molecules except during contact.
• Molecules move randomly with a range of speeds.
• Molecules obey the laws of mechanics.

A force of magnitude F is acting on a region of area A. The force makes an angle θ


F normal
with the normal to the area.

Pressure is defined as the normal force per unit area acting on a surface:
A F cos θ
P= . The unit of pressure is N m−2 and this is known as the pascal, Pa.
A

– mv There is a force on the molecule because its momentum has changed from −mv
to mv, i.e. it has changed by 2mv (in magnitude). Therefore there is also a force on
mv the wall. Pressure develops as result of the force from the very many molecules
colliding with the walls.

! Two factors affect the pressure of a gas: the average speed of the molecules
and the frequency with which the molecules collide with the walls.

Evaporation
Whereas a liquid boils at a specific temperature, a liquid can evaporate (i.e. turn into a vapour) at any
temperature. Unlike boiling, the evaporation process involves surface molecules only. In boiling,
molecules from anywhere in the liquid can leave the liquid.
!
The rate of evaporation increases with increasing
Evaporation in a liquid is followed by a drop in the temperature of
temperature and surface area of the liquid.
the liquid. This is because it is the faster molecules that will escape,
leaving behind the slower ones. Thus the average speed, and hence the average kinetic energy of the
molecules left behind, decreases. Since temperature is a measure of the average kinetic energy of the
molecules, the temperature also decreases.

Test yourself 5
A gas is compressed at constant temperature. Explain why the pressure increases.

Before you answer


What does the constant temperature tell you? What does a smaller volume imply?

Test yourself 6
A gas is heated at constant volume. Explain why the pressure will increase. Before you answer
Does the temperature stay constant?

TOPIC 3: Thermal physics – Core


TOPIC 4: Oscillations and waves – Core

Simple harmonic motion (SHM)


In SHM the acceleration (or the net force) is proportional to and opposite to the displacement from
equilibrium.
Mathematically this means that a = −ω2x where ω is a constant called the angular frequency.
SHM consists of periodic oscillations with a period that is independent of the amplitude. The period is
given by T = 2π.
ω
1
displacement velocity acceleration You must be in a position to draw graphs showing the variation with
time of the displacement, velocity and acceleration for SHM. You must
be careful to show the relative positioning of these three graphs.
x = x0 cos (ωt) thus v = −ω x0 sin (ωt)
Time
The data booklet has v = v0 sin (ωt). You must remember that v0 = −ωx0.
a = −ω2x0 cos (ωt) = −ω2x

Energy in SHM
The kinetic energy of a mass m that undergoes SHM is given by EK = 1 mv2 which can also be written as
2
EK = 1 mω2 x02 sin2 (ωt).
2
The maximum kinetic energy is therefore Emax = 1 mω2 x02 and this is also the total energy of the system.
2
The potential energy is EP = 1 mω2 x2 .
2
The speed in SHM is given by v = ±ω x02 − x2 .
! In SHM, kinetic energy gets transformed to potential
At the extremes of the oscillation, x = ±x and so v = 0. energy and vice versa.
0

As the mass goes past the equilibrium position, x = 0 and so v = ±ωx0.

Test yourself 1
The acceleration is related to displacement according to a a = −4x, b a = 4x c a = −4x2.
In which cases do we have SHM?
a / m s–2
6
Test yourself 2
4
The graph on the right shows the variation with displacement of the acceleration of
a particle oscillating between x = ±15 cm. a Use the graph to explain why the oscillations 2

are SHM. Calculate b the period of the motion and c the maximum velocity. x / cm
–15 –10 –5 5 10 15
–2
Test yourself 3 –4
The graph shows the kinetic energy of a mass of 0.25 kg undergoing SHM as a –6
function of the displacement. Calculate a the period of the motion and b the
maximum speed and the maximum acceleration. c Copy the graph and draw EK / mJ
on another graph to show the variation with displacement of the potential 300
energy. d Estimate the displacement when the potential energy of the mass is 250
equal to its kinetic energy. 200
150
100
50
x / cm
Physics for the IB Diploma –0.2 –0.1 0 0.1 0.2
21

Oscillations with damping


x / cm
Damped oscillations are oscillations in which the mechanical energy is reduced as time
2.0
goes on. This implies that the amplitude is decreasing.
1.5
light
1.0
damping
In a the degree of damping is light. It will take a long time before the oscillations die out. 0.5
0 t/ s
–0.5 0.5 1.0 1.5 2.0
The initial amplitude is 2.0 cm. The amplitude after one full oscillation is 1.4 cm. The energy –1.0
⎞2
has been reduced by ⎛⎝ 1.4 ⎠ ≈ 0.5. After one more oscillation it is reduced by ⎛⎝ 1.0 ⎞⎠ ≈ 0.5,
2
–1.5
a
2.0 1.4
x / cm
i.e. by the same fraction.
2.0
1.5
In b the damping is greater. The oscillations die out faster than in a. After one full oscillation 1.0 heavy
⎞2 damping
the energy has been decreased to ⎛⎝ 1.0 ⎠ ≈ 0.25 of its original value. 0.5
t/ s
2.0 0
–0.5 0.5 1.0 1.5 2.0

! For light damping the frequency (and hence period) of oscillations is the same as
–1.0
–1.5
b
with no damping (but the frequency decreases a bit in the case of heavy damping).

Critical damping
Critical damping means that the system returns to its equilibrium x / cm
3.0
position as fast as possible but without performing oscillations.
2.5
2.0
In the overdamped case, the system returns to equilibrium without 1.5 overdamping
oscillations in a time longer than that in the critically damped case. 1.0
critical
0.5
damping
0 t/ s
Driven (forced) oscillations 0 2 4 6 8
This refers to oscillations in which an external force acts on the
system with a specific frequency fD. A

The graph shows the amplitude versus driving frequency for driven
oscillations with various degrees of damping.

For small damping (top curve) the amplitude is largest (we say we
have resonance) when the driving frequency is equal to the natural 0
f0 f
0
frequency f0.

! For heavy damping (lower curves) the frequency at which resonance takes place
is slightly less than the natural frequency.

Test yourself 4
A car travels on a horizontal road that has bumps 5.0 m apart. The driver observes that at a speed of 12 m s−1
the car oscillates vertically with large amplitude. If the speed is reduced or increased, the amplitude of
oscillations becomes smaller.
a Explain these observations.
b Calculate the angular frequency ω of the vertical oscillations of the car.

TOPIC 4: Oscillations and waves – Core


22

What is a wave?
A wave is the organised (as opposed to random) propagation of a disturbance through a medium. As the
wave passes through the medium the molecules of the medium are displaced from their equilibrium positions.
It is important to realise that in wave motion the molecules of the medium undergo small
displacements whereas the wave itself can move very large distances. A good example is the ! A wave transfers energy
‘wave’ in football games. The people move up and down just a bit but the wave they create can
and momentum.
travel the entire circumference of a stadium.

Mechanical waves Electromagnetic waves


Water, sound, string waves, earthquake waves etc. Light, radio, X-rays, infrared, ultraviolet etc.
Require a medium, cannot propagate in vacuum. Can propagate in vacuum as well as in various media.
The speed of mechanical waves is determined by the properties In vacuum, electromagnetic waves have the same speed
of the medium. c = 3 × 108 m s−1.
The disturbance is the change of a property of the medium from The disturbance is an oscillating electric and magnetic field as
its equilibrium value when there is no wave. they propagate together.

Electromagnetic spectrum

Produced accelerated molecular atomic nuclear


by charges transitions transitions transitions
radio microwave infrared optical ultraviolet X-rays gamma rays

Wavelength 1 10–1 10–2 10–3 10–4 10–5 10–6 10–7 10–8 10–9 10–10 10–11 10–12 10–13 m

Frequency 108 109 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 Hz

Wave characteristics
Definitions
Displacement, y The vector to the position of a point in the medium from the
1
equilibrium position of that point.
You must know these definitions well!
Amplitude, A The maximum displacement.
Crest A point of maximum displacement.
Trough A point of maximum negative displacement.
Wavelength, λ The length of a full wave. It may be found from a displacement–distance graph.
Frequency, f The number of full waves produced by a source in one second. It is measured in hertz (Hz).
The frequency is the inverse of the period, f = 1 .
T
Period, T The time taken to produce one full wave. It may be found from a displacement–time graph.
Wave speed, v The speed at which a crest moves past an observer at rest in the medium or the rate of
energy transfer, v = fλ.
Intensity, I This is the power transferred by the wave per unit area. It is proportional to the square of the
amplitude, I ∝ A2. For a point source emitting uniformly in all directions the intensity a distance d from the
1
source is proportional to d2.

Physics for the IB Diploma


23

Transverse waves
These are waves where the displacement of the medium is at right angles to the direction of energy transfer.

The displacement–distance graph is a ‘photograph’ wavelength


of what the medium looks like at a particular instant y / mm
of time, here t = 0 s. 12 present position

6 amplitude
displacement
0 x / cm
0.5 1.0 1.5 2.0 2.5 3.0
–6

–12

The red arrow at x = 0.8 cm is the displacement (not the velocity) of that point in the medium at a
particular time. From a displacement–distance graph we can determine the amplitude (here 12 mm) and the
wavelength (here 2.0 cm).

But we may want to concentrate at a particular y / mm


period
point in the medium. For example the point amplitude
12
at x = 0.5 cm has displacement 12 mm at t = 0 s.
At other times the displacement of this specific 6
point is given by the displacement – time graph.
We can also determine the amplitude (here 0 t / ms
2 4 6 8
12 mm) and the period (here 4.0 ms.) from the –6
displacement – time graph.
–12

! Every point in the medium undergoes SHM with the same frequency and amplitude as the wave.

The solid line shows a transverse wave on a string y / cm


at t = 0 that moves towards the right. The dotted line 4 now later

shows the wave at time t = 1 ms later. In a time of


2
t = 1 ms the crest moved forward a distance of
0.30 m and so the speed of the wave is 0 x /m
1 2 3 4
v = 0.30−3 = 300 m s−1. The wavelength is 2.0 m.
1 × 10 –2
The frequency is therefore f = v = 300 = 150 Hz.
λ 2 –4
We see that the crests have changed positions – this
is what is expected of a travelling wave.

By drawing the waves at present and at a bit later we can see how the points on the string move. We see e.g.
that the point at x = 1.0 m moved upwards whereas the points at x = 2.0 m and x = 2.5 m moved downwards.

Test yourself 5
For the wave in the first two diagrams above, calculate the speed of a
point in the medium at x = 0.8 cm when t = 0.

TOPIC 4: Oscillations and waves – Core


24

Longitudinal waves
These are waves in which the displacement of the y / mm
medium is parallel to the direction of energy transfer. 5
Sound is the best example of a longitudinal wave. 4
Shown is the displacement–distance graph for a 3
longitudinal wave. 2
1
The red small arrows represent the displacement 0 x / cm
(not the velocity) of the medium at a particular time. 1 2 3 4 5
–1
–2
–3
–4
–5
The 11 dots in the first row represent air molecules
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 cm
at their equilibrium positions, here shown every 0.5 cm.
The dots in the second row show the new positions of
these molecules at the time at which the displacement
of the medium is given by the graph above (whose
amplitude is 5.0 mm, i.e. 0.50 cm).

The molecules at x = 0, 2.0 and 4.0 cm have stayed at the C R


same position (y = 0), those between x = 0 and 2.0 cm
and x = 4.0 and 5.0 cm have moved to the right (y > 0)
and those between x = 2.0 and 4.0 cm have moved to
the left (y < 0).

This means that the molecule at x = 2.0 cm is at the


centre of a compression (C) and the molecule at
x = 4.0 cm is at the centre of a rarefaction (R).

! Looking at graphs of displacement–distance (or time)


does not allow us to tell if the wave is transverse or
longitudinal. The graphs look the same for both types.

Wavefronts and rays wavefront


We call the direction of energy transfer of a wave a ray.
Surfaces at right angles to rays are called wavefronts. (All the
ray
points on a wavefront have the same phase.) By convention
we usually draw wavefronts through crests so that two wavelength
neighbouring wavefronts are separated by one wavelength.

The diagram on the right shows circular wavefronts. We would


create such wavefronts if, for example, we dropped a small
stone in a lake.

Physics for the IB Diploma


25

Wave phenomena
Reflection
A wave will reflect off a surface that is sufficiently smooth. The law of reflection states that
the angle of incidence (angle between ray and normal) is equal to the angle of reflection
(angle between reflected ray and normal) and, further, the incident and reflected rays and the
normal are on the same plane.

Refraction fast
A wave will, in general, change speed (but not frequency) as it moves from one medium into
another. This means that the wavelength will also change. Referring to the diagram the angles of 1

sin θ sin θ
incidence and refraction are related through: v 1 = v 2 (Snell’s law) where v1 and v2
1 2
are the speeds of the wave in the two media.

For light only, we may rewrite this equation as n1 sin θ1 = n2 sin θ2 where n = c is the refractive slow
2
v
index of the medium and c is the speed of light in vacuum. The ray in the diagram enters a medium
in which the speed is slow and so bends towards the normal.

Water waves refract when they move from deep to shallow water. The speed in shallow
water is decreased (we know this because the distance between the wavefronts in shallow deep

water is smaller) and so we have refraction.

step
For the wave shown in the diagram, the ratio of the speeds in the deep and shallow parts is
shallow
about 1.7, found from measuring the distances between wavefronts.

Diffraction
Diffraction is the spreading of a wave as it goes through an aperture (opening) or past an obstacle.

! Diffraction applies to all waves but it is important to realise that the degree to which a wave diffracts
depends crucially on the size of the wavelength compared to the size of the aperture or the obstacle.

wavelength small wavelength comparable to


compared with aperture aperture
no wave here A
no wave here
the wave is
spreading
no wave here
B a b

Here the wavelength is very small Here the wavelength is comparable to In a the wavelength is very small and
compared to the size of the opening. the opening size. There is maximum there is no appreciable diffraction as the
There is essentially no diffraction. The diffraction. The wave is spreading in every wave goes past the obstacle. In b the
wave goes through the opening without direction after having gone through the wavelength is comparable to the obstacle
spreading. This applies for example to opening. This would apply to sound going and diffraction takes place. Notice how
light (very small wavelength) going through a window. the wave reappears directly behind the
through a window. obstacle.

Test yourself 6
A ray of light in air of wavelength 540 nm enters water (n = 1.33) making an angle of
Before you answer
50° with the water surface. Calculate a the speed of light in water, b the wavelength
Watch what angles you need.
of light in water and c the angle of the ray with the normal in water.

TOPIC 4: Oscillations and waves – Core


26

Superposition and interference


When two waves meet the resultant displacement is the sum of the individual y / mm
displacements. 1.5
1.0
0.5
Two waves (green line and red dotted line) meet. The sum of the two
0 x / cm
displacements is shown by the blue heavy line. –0.5 0.5 1.0 1.5 2.0
–1.0
–1.5

If the two waves meet crest to crest (here one wave is shown slightly displaced y / mm
for clarity), the result is a wave with double the amplitude of the individual 2

waves. This is constructive interference. 1

0 x / cm
0.5 1.0 1.5 2.0
–1

–2

If the two waves meet crest to trough, the result is that the two cancel each y / mm
1.0
other out. The resulting wave has zero amplitude, i.e. we do not have a wave!
This is destructive interference. 0.5

0 x / cm
0.5 1.0 1.5 2.0
–0.5

–1.0

Notice that if the waves have different amplitude then they will never y / mm
completely cancel out. Here the two waves (green line and red dotted line) 2

meet crest to trough but the amplitudes are different. There is a non-zero 1
resultant wave here even though we still have destructive interference. x / cm
0
0.5 1.0 1.5 2.0
–1

–2

Two-source interference
In this case identical waves from two coherent sources (i.e. the phase difference between the sources is
constant) arrive at the same point in space. What is the wave at that point, i.e. how do we know if the waves
will interfere constructively or destructively? It all depends on how much extra distance one wave has to
travel to get to the point. We call the extra distance path difference = S2P − S1P (see diagram).

If path difference = n ⇒ constructive interference P


λ integer

If path difference = n + 1 ⇒ destructive interference S1


λ 2 S2
half integer

Test yourself 7
Two sources S1 and S2 emit waves of wavelength λ = 0.30 m. Point P is such that S1P = 3.40 m and S2P = 4.0 m
and point Q is such that S1Q = 3.20 m and S2Q = 3.65 m. Determine what is observed at P and at Q.

Before you answer


Everything depends on path difference.

Physics for the IB Diploma


TOPIC 5: Electric currents – Core

Key ideas
atom with
In a conductor, such as a metal, there are ‘free’ electrons. Free electrons are dispersed
electron
throughout the metal volume and are not attached to any one particular atom. The cloud
higher the temperature, the higher the average kinetic energy of the free electrons. The
atoms also have kinetic energy, vibrating about their equilibrium positions. The charge ‘free’
on one electron is −1.6 × 10−19 C. electrons

In an insulator there are very few such free electrons.

When an electric field (see Topic 6) is established within the conductor, the free electric field
electrons will get a small drift velocity opposite to the electric field.

! (Caution: The diagram is way out of scale; the drift velocity is very much smaller than drift velocity
the random velocity of the electrons. Typically, vdrift = 10−3 m s−1 whereas vrandom = 105 m s−1.)

This means that, unlike before, the electrons now have a net motion in a specific direction,
namely opposite to the electric field. This means that electric charge gets transferred in a
direction opposite to the electric field. This is called electric current.

Definitions
Electric current The charge that moves through the cross-sectional area of a conductor per unit time,
ΔQ
I= . The unit of current is the ampere, 1 A = 1C s−1. (The definition of the ampere is given in terms of the
Δt
magnetic force between parallel currents – see Topic 6.)
Potential difference The work done per unit charge in moving charge between
!
Important: This means that the work
two points: V = W . The unit of potential difference is the volt, V, and 1V = 1 J C−1. done to move a charge q through a
q
potential difference V is W = qV.
The electronvolt This formula allows for the definition of a new unit of energy (to be
used extensively in Topics 7 and 13) called the electronvolt, eV. 1 eV is the energy
required to move a charge of 1 e through a potential difference of 1 V. Thus an electron moved through a
potential difference of 6 V requires 6 eV and an alpha particle (charge 2 e) requires 12 eV. In SI units:
1 eV = 1.6 × 10−19 C × 1 V = 1.6 × 10−19 J. 1
Omitting the words in bold will
Electric resistance The resistance of a device is defined as the ratio of the potential
not get you points in an exam.
difference across it to the current through it, R = V . The unit of resistance is the ohm,
I
1 Ω = V A−1.
A current of 2.0 A in a resistor of 25 Ω implies a potential difference across the resistor of V = RI = 50 V.

! Avoid thinking about resistance in terms of the ‘resistance experienced by electrons as they move in a metal’.
Also, resistance is not defined in terms of the slope of a V–I graph.

I/ A
Test yourself 1
The current in a conductor varies with applied voltage as shown in the graph. 1.5
Calculate the resistance of the conductor when the voltage is 0.30 V.
1.0

0.5

0 V/V
0 0.2 0.4 0.6 0.8 1.0

TOPIC 5: Electric currents – Core


28

Power
Power is the rate at which energy is dissipated. I R

The amount of charge that gets transferred across the resistor in time t is Q = It. V
The work required to move a charge Q across a potential difference V is
QV = (It)V. The work per unit time is the power and so P = ItV , i.e. P = VI.
t
2
Using the definition of resistance R = V we have the equivalent forms: P = VI = RI2 = V .
I R

For a conductor of uniform cross-sectional area: R = ρ L where L is the length and


A
A the cross-sectional area. The constant ρ is called the resistivity and depends on the A
temperature and the kind of material from which the conductor is made.

Ohm’s law L
At constant temperature, many metallic conductors have the property that the current through them is
proportional to the potential difference across them, i.e. I ∝ V. This is known as Ohm’s law. Ohm’s law
implies that the resistance is constant. For a conductor that obeys Ohm's law a graph of current through,
versus voltage across, gives a straight line through the origin.

The graph below shows the I−V characteristics of This graph shows the I−V characteristics of a
two conductors of different resistance, each obeying conductor that does not obey Ohm’s law. As V
Ohm’s law. increases the resistance increases.

I I
lower R
lower R

higher R
higher R

V V

! The voltage is sometimes plotted on the vertical


axis, so watch out!

Test yourself 2
Determine the resistance of a lamp rated as 60 W at 240 V. Assuming the resistance stays constant,
determine what the power of the lamp would be if connected to a source of 120 V.

Test yourself 3
a The length and radius of a cylindrical conductor of resistance R are both doubled at constant temperature.
Calculate the new resistance of the conductor.
b A cylindrical conductor has cross-sectional area A and length L. The conductor is cut into two equal parts
of length L each. The two parts are connected in series. Calculate the resistance of the combination.

Physics for the IB Diploma


29

Emf and series circuits


Work must be done in order to move an amount of charge Q completely
around a circuit. The total work done per unit charge is called the emf
of the source, i.e. of the battery in the circuit shown. battery

emf, = work to move charge Q around the circuit


charge Q

(Emf is associated with conversions of various forms of energy into electrical energy.
In the case of a battery it is chemical energy that gets converted into electrical energy.)
1
Emf is measured in joules per coulomb and this combination is You may use either one of these
called the volt. statements to define emf.

If this work is done in time t then emf, = work to move charge Q around the circuit / t
charge Q / t

= total power
total current

The total power delivered by the battery is therefore I. I

The battery has internal resistance r. r


A
V
Power used in R is VI. Power used in r is rI2.
R
Hence I = rI + VI ⇒ V =
2
− Ir (energy conservation)

So the potential difference across the battery is equal to the emf when the current in the circuit is zero.

Two important facts about a series circuit


In many cases we can assume that the internal resistance of the battery or power supply is negligible.

In the circuit shown we have that: I

Total power delivered by battery is I. A

Power used in R1 is R1I2. Power used in R2 is R2I2. R1 R2

Hence, I = R1I2 + R2I2 ⇒ I = V1 V2


R1 + R2

i.e. the effective (total) resistance of two resistors in series is the sum of the two.

For the same reason as above we also have that I = V1I + V2I ⇒ = V1 + V2

i.e. the sum of the potential differences across resistors in series is equal to the emf of the battery.

In the circuit shown, if = 12 V and R1 = 10 kΩ and R2 = 50 kΩ we must have that: V1 + V2 = 12 and V2 = 5V1
(since both have same current and R2 is 5 times R1). We therefore find V1 = 2.0 V and V2 = 10 V.

Test yourself 4
A battery of internal resistance 0.80 Ω sends a current of 1.4 A through an external resistance. The work
required to push one electron through the external resistor is 7.2 × 10−19 J. Calculate the emf of the battery.

TOPIC 5: Electric currents – Core


30

Parallel circuits
I
Total current delivered by battery= is . Current in R1 is .
RT R1
A Current in R2 is . By conservation of charge (current):
R1 R2

= + hence 1 = 1 + 1 .
R2 RT R1 R2 RT R1 R2
total I current in R1 current in R2

Test yourself 5
a Calculate the total resistance between A and B. Each resistor shown has a
resistance of 60 Ω. b The resistance between A and B is measured and found
to be 120 Ω. Which resistor is faulty and how?

A B

Test yourself 6 12 V
In the circuit the battery has negligible internal resistance and emf 12 V.

0.60 A
Calculate the value of a resistance R2 and b resistance R1.
R2

R1 25

0.20 A

Test yourself 7 r 12 V
A battery of emf 12 V and internal resistance r = 2.0 Ω is connected to
three resistors of resistance R = 6.0 Ω. a Calculate the total current in the
circuit. b The bottom 6.0 Ω resistor burns out (i.e. its resistance becomes R R
infinite). Calculate the total resistance of the circuit.

Test yourself 8
a Two lamps, A and B, are connected in series with a battery of negligible internal resistance.
Lamp A is brighter than lamp B. Determine which lamp has the greater resistance.

Before you answer


Brightness is related to power. Which form of the power formula is convenient here?

b The lamps are now connected to the same battery in parallel. State and explain which lamp is the brighter
of the two.

Before you answer


You now need a different version of the power formula.
12 V

Test yourself 9
In the circuit the battery has emf 12 V and negligible internal resistance. The voltmeter
is ideal. Calculate the magnitude of the reading on the voltmeter. 4.0 8.0

8.0 4.0

Physics for the IB Diploma


31

The potential divider I I

The circuit on the left is called a potential divider circuit.


It looks complicated but is in fact equivalent to the R1 R2
R1 S R2
conventional circuit to its right. The point where the slider R
S touches the resistor determines how the resistance R A S
A
splits into R1 and R2.

V V

The next two pairs of circuit diagrams show two extreme


positions of the slider and their equivalent conventional circuits.

I I I I

R1 + R2 R1 + R2 R1 + R2 R1+ R2
S S S S

A A A A
R R

V V V V

When the slider is at the far left the voltmeter When the slider is at the far right the voltmeter
will show 0 V (even if the battery has an internal will show its greatest reading. This will be if
resistance) because its ends are at the same the battery has zero internal resistance. It will be
potential. V = − Ir otherwise.

Test yourself 10
Calculate the maximum reading of the voltmeter in the potential divider circuits if = 12 V, R1 + R2 = 100 Ω,
R = 5.0 Ω and r = 2.0 Ω.

Definitions
Thermistor Resistor in which the resistance decreases as the temperature increases.
LDR (light-dependent resistor) Resistor in which the resistance decreases as the incident intensity of
light increases.

Test yourself 11
The diagram shows a potential divider circuit. The battery has negligible internal resistance and AC is a wire 12 V
whose resistance increases uniformly with length.
The lamp is rated as 12 W at 6.0 V at normal operation. The lamp operates normally when the moveable
R
contact is attached to point B such that the length AB is double that of BC. Calculate a the resistance of the
A C
light bulb, b the current through the light bulb and c the resistance R of the wire AC. B

Test yourself 12
a The thermistor T in the circuit shown has resistance R at room temperature. What will happen to the 12 V
potential difference across T when the temperature is increased? Assume zero internal resistance.
b The thermistor is now replaced by an LDR. What will happen to the voltage across it if the light
intensity is increased?

T R

TOPIC 5: Electric currents – Core


TOPIC 6: Fields and forces – Core

Comparing gravity and electricity


There are great similarities but also differences between gravity and electricity. The two topics are presented
side by side to emphasise this relationship. You may want to study one column first and then the other or
both at the same time.

Gravity Electricity
Newton’s law of gravitation Two point masses Coulomb’s electrostatic law Two point charges
m1, m2 separated by a distance r attract each other q1, q2 separated by a distance r exert a force on each
mm qq
with a force that equals F = G 1 2 2 other that equals F = k 1 2 2
r r
same sign charges
q1 q2
m1 m2
q1 q2
r opposite sign charges
r

This formula can also be used for two uniform Because there are two types of charge the electric
spherical masses, in which case the separation r is force is attractive between charges of opposite sign
the centre-to-centre separation. but repulsive for charges of the same sign.
G is the universal gravitational constant k is the Coulomb constant
G = 6.67 × 10−11 N m2 kg−2. k = 8.99 × 109 N m2 C−2.

Notice the mathematical connection between the two laws: they are both inverse square laws but the
gravitational force is always attractive whereas the electrical can be attractive or repulsive.

Test yourself 1
The weight of a body on a planet is 20 N on the planet surface. What is the weight at a height from the
surface equal to the planet’s radius?

Before you answer


Weight means the gravitational force.

Test yourself 2
The Earth orbits the Sun in a circular orbit of radius 1.5 × 1011 m. Calculate the mass of the Sun.

Test yourself 3
An electrically neutral conducting sphere is suspended vertically from an insulating thread. A point charge of
magnitude Q is brought near the sphere. The electric force between the point charge and the sphere
A depends on whether Q is positive or negative.
Before you answer
B is always zero.
The sphere is conducting and so charge in it
C is always repulsive.
can separate.
D is always attractive.
© IB Organization 2006

Physics for the IB Diploma


33

The concept of a field


How does the force propagate from one body to another? To ask the question anthropomorphically, how
does a mass ‘know’ that another mass is attracting it? In other words if the Sun were to magically disappear,
after how much time would its force on Earth become zero?
In an attempt to answer this question physicists introduced the idea of a field.
We say that a mass M creates around it a gravitational field. Other masses respond to this field by having a
gravitational force act on them.
Similarly, an electric charge Q creates in the space around it an electric field. Other charges respond to this
field by having an electric force act on them.
To ‘feel’ the gravitational field you must have mass and to ‘feel’ the electric field you must have charge.
A field exists in a region of space and exerts a force on a particle (a mass or electric charge) that is present
in that region of space. The field is a property of the mass or the charge creating the field (the ‘source’) and
(usually) distance (from the source).

Gravitational field, g (a vector quantity) Electric field, E (a vector quantity)


This is defined as the vector gravitational force per This is defined as the vector electric force per unit
unit mass exerted on a small, point mass m, charge exerted on a small, positive point charge q,
F F
i.e. g = ⇔ F = mg i.e. E = ⇔ F = qE
m q
Recall that the field is a property of the mass Recall that the field is a property of the charge
creating it. In the definition above it appears creating it. In the definition above it appears
that the mass m also enters the definition. If the that the charge q also enters the definition. If the
definition is correct the dependence on m must definition is correct the dependence on q must
cancel out. So consider the gravitational field cancel out. So consider the electric field created by a
created by a spherical mass M. A point mass m spherical charge Q. A positive point charge q placed
placed a distance r from the centre of M will a distance r from the centre of Q will experience a
Mm Qq
experience a force F = G 2 and so the gravitational force F = k 2 and so the electric field is
r r
field is
F GMm/r2 GM F kQq/r2 kQ
g= = = 2 E= = = 2
m m r q q r

Test yourself 4
The gravitational field strength at the surface of Earth is g. The gravitational field strength at the surface of a
planet of mass and radius double that of the Earth is
g g g
A 8 B 4 C 2 D g

Test yourself 5 –Q Q
Four point charges of equal magnitude are held at the corners of a Before you answer
square as shown. Imagine a positive charge at the
centre of the square and find the
Which arrow shows the direction of the resultant electric field direction of the force on this charge
strength at the centre of the square due to the four point charges? from each of the four charges
A ↑ B ← C → D ↓ –Q Q separately. Then use vector addition.
© IB Organization 2005

TOPIC 6: Fields and forces – Core


34

Field patterns
Gravitational and electric fields
The gravitational field of a point mass (here, at the origin of the axes)
is radial.

The exact same pattern also holds for a negative electric point
charge. The pattern for a positive charge would have the arrows going
outwards.

These diagrams show electric field


patterns. On the left: two opposite
but unequal charges. The charge
on the right is three times larger.
On the right: two equal positive
charges.

Magnetic fields
Electric current in wires of various shapes will produce a magnetic field.

The diagrams on the right show the magnetic field around a long straight
wire at varying distances. The arrows show magnetic compass needles. The
magnetic field lines are obtained by joining the compass needles smoothly
with curves, forming circles around the wire. The magnetic field itself is
tangential to these circles in a direction found from the right hand grip rule.

The magnetic field lines are also shown for a current loop, permanent magnet
and solenoid.

Current loop Permanent magnet Solenoid

N turns of wire

S N

S N

Test yourself 6 Before you answer


Draw the electric field around a negatively charged What is the direction of the field? At what angle do the
conducting sphere. field lines meet the surface of the sphere? What is the
electric field inside a conductor?

Physics for the IB Diploma


35

Motion of charged particle in electric and magnetic fields


Magnetic forces
The presence of a magnetic field is force force
detected by its effects on permanent
magnetic magnetic
magnets such as magnetic compass field field
needles, or its effects on moving charged
particles and other electric currents. A velocity current
magnetic field B exerts a force on moving positively charged particle wire
charges given by F = qvB sin θ and a force on
electric currents given by F = BIL sin θ.

Definitions
Ampere (A) Two parallel conductors 1 m apart have a current of 1 A in them if the force on 1 m of their
length is exactly 2 × 10−7 N.
Magnetic field strength The strength of a magnetic field is said to be
1 tesla (1 T) when it exerts a force of 1 N on a 1 m length of a wire carrying
! The magnetic force does zero work on
a current of 1 A at right angles to the direction of the field. the charged particle because the force is
A charged particle of mass m and charge q that enters a region of magnetic field B at right angles to the velocity. Therefore
at right angles to the magnetic field will move in a circular path of radius R given by the magnetic force cannot change the
speed of the particle (only the direction
⇒ R = mv
2
mv = qvB of the velocity).
R magnetic force
qB
centripetal force
+
Crossed electric and magnetic fields
An electron enters a region of electric and magnetic fields as shown. electric field downwards
v
The electron is negatively charged so the electric force is opposite to magnetic field into page
the electric field, i.e. upwards. The right hand rule for the magnetic –
force direction gives a downward force for the negative electron.

The path of the electron is undeflected. This means that


! A positively charged particle, for example a proton or
the electric force on the electron upwards is cancelled by an alpha particle, would also be undeflected if it enters
the force due to the magnetic field downwards, with the same velocity. Think about how the electric and
i.e. qE = qvB, so E = vB. magnetic forces on these particles change in direction and
magnitude compared to what they were on the electron.
Work done
A very large number of problems are solved using the result from the topic of electricity that the work done
in moving a charge q across a potential difference ΔV is W = qΔV.

Combining this with the result from the topic of mechanics that the work done is also the change in kinetic
energy W = ΔEK gives: qΔV = ΔEK.

Test yourself 7
Two wires, X and Y, carry equal currents into the page as shown in the diagram. X Y
Point Z is at the same distance from X and Y. The direction of the magnetic field at Z is
A ↓ B → C ↑ D ←

Before you answer


Z
You must find the magnetic field at Z from each wire separately and then use vector addition.

TOPIC 6: Fields and forces – Core


TOPIC 7: Atomic and nuclear physics – Core

Atomic structure
The Rutherford, Marsden, Geiger experiment
Alpha particles (massive positively charged particles) from a radium source are directed at a thin gold foil.
The expectation was that the particles would suffer very small angle deflections due to the electrical
repulsion between the positive charge on the alpha particles and the positive charge in the atom.

most alpha particles


did this…
! This is evidence for the existence of the nucleus,
a small, massive, positively charged object in the
…but very occasionally
atom.
this happened

The fact that a few of the particles deflect by very large angles implies that the force deflecting them is very
large. This can happen only if the alpha particles come very close to the positive charge of the atom. In the
model of the atom available at the time of the experiment, the closest the alpha particles could come to the
positive charge of the atom was 10−10 m, but to produce the large deflections the closest distance should have
been about 10−15 m.

The diagrams below show Thomson’s old model of the atom and the new model suggested by Rutherford to
explain alpha particle scattering.
Thomson’s model Rutherford’s model
The positive charge of the atom solid empty
must be concentrated in a very
small volume, i.e. the nucleus.
10–10 m 10–10 m

10–15 m
nucleus

But the new model has a problem: The orbiting electrons have centripetal acceleration and so should
radiate, losing energy and spiralling into the nucleus.

Resolution: Electrons in atoms show quantum behaviour that dictates that they can exist in discrete
energy levels. No radiation is emitted except when the electrons make transitions from high energy levels to
lower energy levels.

Test yourself 1
Explain why in the Rutherford experiment a the alpha particle beam must be very narrow and
b the foil must be very thin.

Test yourself 2
Describe the Rutherford experiment and state what conclusions may be reached from it about the
distribution of matter in an atom.

Physics for the IB Diploma


37

Atomic energy levels and nuclear structure


The emission spectrum
Gases emit light when heated to a high temperature or when exposed to a high electric
field. The light emitted consists of specific wavelengths. The set of wavelengths emitted is
characteristic of the gas.
410 434 486 656 nm
Light is emitted in bundles of energy called photons and each photon has an energy given
by E = hf where h is a constant.
! Atomic spectra provide
The wavelength and frequency of a photon are related by c = λf where c is the speed of light.
evidence that the energy in
The photon carries away an energy equal to the difference ΔE in energy of the levels atoms is discrete, i.e. there are
involved in the transition. energy levels.

The absorption spectrum


If white light is transmitted through hydrogen gas, various wavelengths will be missing
in the transmitted light. These wavelengths correspond exactly to the emission line
wavelengths. This is because electrons in the atoms of hydrogen absorbed these photons 410 434 486 656 nm
and made a transition to a higher energy state.

Nuclear structure
The approximate mass of a nucleus of mass number A is A atomic mass units (u).
1
1 u = 1.66 × 10−27 kg. The u is 12 of the mass of the neutral atom of the carbon isotope 126 C .
Nuclei contain nucleons, i.e. protons and neutrons. A particular nucleus with Z protons and N neutrons is
denoted by N + ZZ X or AZ X where A is the nucleon number, Z is the proton number and X is the chemical
name of the element. Thus 42 He represents the nucleus of helium with 2 protons and 4 − 2 = 2 neutrons.
A nucleus with a specific number of protons and a specific number of neutrons is called a nuclide. Nuclei
with same proton number but different nucleon number are called isotopes of each other. Thus 32 He, 42 He,
…, 102 He are the eight isotopes of helium. Isotopes have the same chemical (same number of electrons) but
different physical properties (e.g. different mass, nuclear radii, specific heat capacity).

Forces in the nucleus


The dominant forces acting within a nucleus are:
! The gravitational force is negligible because
1. the electrical repulsion force between the
protons. the masses involved are so small.
2. the strong nuclear force acting between
nucleons (protons and neutrons) which is
(mostly) attractive. ! The strong force has a short range, which means that a nucleon
The presence of the strong nuclear force prevents attracts its immediate neighbours only, unlike the electrical force,
the electrical force from ripping the nucleus apart. which, with its infinite range, implies that any one proton repels all
other protons in the nucleus.

Test yourself 3
Calculate the wavelength of the photon emitted in a transition between two energy states that differ in
energy by 1.9 eV.

TOPIC 7: Atomic and nuclear physics – Core


38

Nuclear stability and radioactivity


Nuclear stability
Of some 2500 nuclides, less than about 300 are stable. The rest are unstable and decay by the ! A small stable nucleus has
emission of particles in a phenomenon called radioactivity, which is discussed below.
about the same number of
The instability of nuclei may be discussed in terms of the forces acting within the nucleus.
protons and neutrons and
If a nucleus contains too many protons compared to neutrons, the nucleus will be unstable a large stable nucleus has
because the electrical repulsion force will overwhelm the strong nuclear force. more (but not many more)
neutrons than protons.
But a nucleus may also be unstable if it contains too many neutrons compared to protons. In that
case, the nucleus can reduce its energy (and so become more stable) by a process known as beta
decay (see below) in which a neutron is converted to a proton.
It appears that a nucleus should be stable if it contains about the same number of protons and neutrons. This
is true for small nuclei. But large nuclei require a few more neutrons than protons to be stable. The neutrons
contribute to binding without contributing to the repulsive electric force.

Radioactivity
Most nuclei are unstable and try to become more stable by decaying, i.e. by emitting one or more
of three types of particles or radiation: alpha, beta or gamma.
• Alpha particles are helium-4 nuclei, 42He or 42α.
• Beta particles are fast electrons, −10e.
• Gamma particles are photons, 00γ.
! For the same energy,
These particles are ionising, i.e. they knock electrons off the atoms they collide with, creating
ions and radicals. alpha radiation is the least
penetrating and the most
The process of radioactive decay is: ionising, while gamma
• random – it cannot be predicted which nucleus will decay or when it will decay radiation is the most
• spontaneous – it cannot be induced to happen or prevented from happening. penetrating and the least
ionising.
The biological effect of radiation
Alpha, beta and gamma radiation are all damaging to living organisms. The damage is caused because the
ions and radicals formed by ionisation may disrupt the ordinary function of cells. In addition, if too many
molecules in a cell are ionised the cell may die or become defective. A defective cell may reproduce into more
defective cells, leading to various forms of cancer.

Examples of alpha decay


94 Pu → 2 α + 92 U
242 4 238 211
83 Bi vα In alpha decay a nucleus decays by
238
→ α+
4 234 emitting an alpha particle.
92 U 2 90 Th
alpha particle The diagram shows decay of a 21183 Bi
218
84 Po → 42 α + 214
82 Pb
nucleus at rest. The products have
211
83 Bi → 42 α + 209
81 Tl equal and opposite momenta.
209
81 Tl

vTl

Test yourself 4
Calculate the ratio of kinetic energies KEα : KEPb in the alpha Before you answer
84 Po → 2 α + 82 Pb when the Po nucleus is at rest.
decay 218 4 214
Remember that momentum is
conserved.

Physics for the IB Diploma


39

Examples of beta decay


6C → −1e + 7N + ⎯ν
14 0 14 0 In beta decay a nucleus decays by emitting an
0
electron as well as an antineutrino.
20Ca + ⎯ν
→ −10e + 40
40 0
19K 0

60
27Co 28Ni + ⎯ν
→ −10e + 60 0
0 ! The electron and the proton are created during the decay. Do not
think of a neutron as consisting of an electron and a proton.
Examples of gamma decay
28Ni → 0γ + 28Ni
60 0 60
In gamma decay a nucleus decays by emitting a gamma particle,
i.e. a photon.
24
12Mg → 00γ + 24
12Mg
The nuclei to the left and right of the reaction arrow differ only
238
92U → 00γ + 238
92U
in the amount of energy they have.

! The energies of the alpha and gamma particles are discrete whereas those of the electrons in beta decay
are continuous.

The radioactive decay law


Despite the random nature of radioactive decay we can still formulate a radioactive decay law which states
that (when we have a very large number of unstable nuclei) the activity, i.e. the rate of decay, is
proportional to the number of nuclei present: dN ∝ N.
dt
The unit of activity is the becquerel: 1 Bq = 1 decay per second.
The time interval after which the activity of a sample is reduced by a factor of 2 is called the half-life, T 12 .
The chance any nucleus will decay within any interval equal to the half-life is 50%.
The radioactive decay law implies an exponential decrease in activity as time passes.

A / A0
1.0

0.8 ! In a graph of activity against time the


0.6 half-life is determined by finding the
time at which the activity is half of the
0.4
initial activity. For this isotope the half-
0.2 life is 2.0 min.

0 t / min
0 2 4 6 8

Test yourself 5 Test yourself 7


The half-life of an isotope is 4.0 days. Calculate the A radioactive isotope has a half-life of 2.0 minutes.
fraction of the original activity of the isotope left 12 A particular nucleus has not decayed within a
days after it was prepared. 2.0 min time interval. A correct statement about the
next 2.0 min interval is that this nucleus
Test yourself 6
A has a lower than 50% chance of decaying. Before you answer
An isotope X has a half-life of 2.0 minutes. It decays
B will certainly decay. Remember the definition
into isotope Y that is stable. Initially no quantity of
C has a 50% chance of decaying. of half-life.
isotope Y is present. After how much time will the
D has a better than 50% chance of decaying.
ratio of Y atoms to X atoms be equal to 7 : 1?

TOPIC 7: Atomic and nuclear physics – Core


40

Mass defect and binding energy


A nucleus consisting of Z protons and N neutrons has a mass that is less
than the mass of the protons and neutrons making it up. The difference is
+ B.E. = nucleons separated
the mass defect δ of the nucleus.
Mass defect:
δ= Zmp + Nmn − M






total mass of nucleons

mass of nucleus

The product of mass defect multiplied by the square of the speed of light is called binding energy, B.E.
The binding energy is the minimum energy needed to completely separate the nucleons of a nucleus.
A graph of the binding energy per nucleon
against nucleon number A shows a peak at ! The similarity in binding energy per nucleon is
the nucleus Ni-62. This makes this nucleus
a consequence of the short range of the strong
the most stable nucleus.
nuclear force: in a large nucleus any one nucleon
It also shows that most nuclei have approximately is surrounded by the same number of nucleons
the same binding energy per nucleon, roughly 8.5 MeV. and so it takes the same energy to remove it.

9 40
A 116
Sn 130
31
P 56
Fe 75
As 86
Sr 98
Xe 144
Nd
27
Al 35
Cl 63
Mo 176
Hf 194
16
O 62 Cu 150 Pt
8 20
Ne Ni 124
Xe 136
Xe Nd 182 235
C 12 W 208 U
4
19
F Pb
He 14
238
U
N
Average binding energy per nucleon / MeV

7 11
B
9
Be
6
7
Li
6
5 Li

3 3
H
3
He
2

2
1 H

1
H
0
0 20 40 60 80 100 120 140 160 180 200 220 240

Nucleon number, A

Test yourself 8
84Po → 2α + 82Pb in terms of the binding energies of
a Express the energy released in the alpha decay 218 4 214

polonium, lead and helium. b Using the graph above, estimate the energy released.

Test yourself 9
The binding energy per nucleon of the nucleus 115B is approximately 7 MeV. The energy
Before you answer
needed to completely separate the nucleons of this nucleus is approximately
How many nucleons are there
A 35 MeV B 42 MeV C 77 MeV D 112 MeV in the nucleus of 115B?

Physics for the IB Diploma


41

Fission and fusion


Definitions
Fission A large nucleus splits (fissions) into two smaller nuclei plus a few neutrons plus energy (and
92U + 0n → 40Zr + 52Te + 3 0n.
usually photons). For example: 235 1 98 135 1

Fusion Two light nuclei join (fuse) into a heavier nucleus plus energy. For example: 21H + 21H → 32He + 10n.
Artificial transmutation An element is induced to change nature.
Energy calculations in fission and fusion
The energy produced by a fission or fusion reaction is calculated using the mass defect. A mass of 1 u is
equivalent to 931.5 MeV.
The fission reaction used as an example above is:
235
92U + 10n → 98
40Zr + 135 1
52 Te + 30n

The masses are: U-235 = 235.0439 u, Zr-98 = 97.9128 u, Te-135 = 134.9165 u and the mass of the neutron is
1.0087 u.
The difference in mass (the mass defect, found from the mass on the left of the reaction minus the mass on
the right) is:
(235.0349 + 1.0087) – (97.9128 + 134.9615 + 3 × 1.0087) = 0.1972 u
This is positive and so energy is released. This energy is Q = 0.1972 × 931.5 = 184 MeV.
The fusion reaction between two deuterium nuclei (used as an example above) is:
2
1H + 21H → 32He + 10n
The masses are: deuterium = 2.0141 u, helium = 3.0160 u and that of the neutron is 1.0087 u. The difference
in masses is (left minus right)
2 × 2.0141 – (3.0160 + 1.0087) = 0.0035 u
The energy released is then 0.0035 × 931.5 = 3.26 MeV.

! It is important that you realise that the energy released, Q, in both the fission and the fusion processes
can also be calculated by adding the binding energies of the products to the right of the reaction and
subtracting the total binding energy on the left.
For example, a nucleus with mass number 200 has a binding energy (see the binding energy curve on
page 40) of approximately 200 × 8 = 1600 MeV. If it fissions into two nuclei of mass number 100, the total
binding energy is approximately 2 × 100 × 8.6 = 1720 MeV. Then Q = 1720 − 1600 = 120 MeV.

Fusion in stars
Stars produce their energy by nuclear fusion in ! Temperature must be high for the nuclei to
the core of the star where the temperature and the
overcome their electrical repulsion.
pressure are both high.
Pressure must be high to ensure a high
probability of collisions and hence fusion.

Test yourself 10
In 1919, Rutherford observed the following artificial transmutation reaction: 42He + 147N → 178O + 11H.
The masses (in u) are: He: 4.002 60, N: 14.003 07, O: 16.999 13 and H: 1.007 83. Explain why the reaction
cannot occur unless the alpha particle supplies sufficient kinetic energy.
© IB Organization 2007

TOPIC 7: Atomic and nuclear physics – Core


TOPIC 8: Energy, power and climate change – Core

Energy sources
Definitions
Non-renewable sources of energy Finite sources, which are being depleted much faster than they can be
produced, and so will run out. They include fossil fuels (e.g. oil, natural gas and coal) and nuclear fuels (e.g.
uranium). Worldwide, about 86% of our energy comes from fossil fuels and about 7% from nuclear. Fossil
fuels have been created over millions of years when buried animal and plant matter decomposed under the
combined action of bacteria and the high pressure of the material on top.
Renewable sources of energy Include solar energy (and the other forms indirectly dependent on solar
energy such as wind energy, wave energy, bio-fuels) and tidal energy. At present, about 7% of our energy
comes from these sources.
Energy density of fuels The amount of energy that can be obtained from a unit mass of the fuel. It is
measured in J kg−1.
Degradation of energy Energy, while being always conserved, becomes less useful, i.e. it cannot be used
to perform mechanical work – this is called energy degradation. The thermal energy that comes out of the
exhaust of a car is degraded energy. It cannot be used further.

Fossil fuels
Typical engine efficiencies
diesel/oil/gasoline engines 30–40%
coal power plants 30%
natural gas power plants 45%

Advantages of fossil fuels Disadvantages of fossil fuels


• high energy density • fossil fuels, especially oil, pose serious environmental problems
• a variety of engines and due to leakages at various points along the production–
devices use them directly and distribution line
easily • contribute to the greenhouse effect by releasing greenhouse
• an extensive distribution gases in the atmosphere when burnt
network is in place • need extensive storage facilities

Electricity production
Many of the energy sources that are available to us today are used to produce electricity.

fossil fuels
nuclear power (reactors) kinetic / rotational electrical
wind energy (windmills) thermal energy in energy
hydroelectric (turbines) energy turbines
wave power (OWC devices)

solar energy (photovoltaic cells)

Physics for the IB Diploma


43

Nuclear power
Definitions
Nuclear reactors Machines in which nuclear reactions take place, producing energy. The ‘fuel’ of a nuclear
reactor is typically uranium-235. A typical energy-producing fission reaction is:
1
0n + 235
92U → 54Xe + 38Sr + 2 0n
140 94 1

Chain reactions The neutrons produced in a fission reaction can be used to collide with other nuclei of
uranium-235 in the reactor (after they are first slowed down), producing more fission, energy and neutrons.
Critical mass Critical mass is the minimum mass of uranium-235 for the chain reactions to sustain
themselves; otherwise the neutrons escape without causing further reactions.
Uranium enrichment The uranium commonly mined is uranium-238 which contains small traces (0.7%)
of uranium-235. The process of increasing the concentration of the useful fuel uranium-235 in uranium
samples is called enrichment. For nuclear power plants the concentration is increased up to 5%. Uranium
used in nuclear weapons is enriched to much higher values, around 80%.
Heat exchanger This is where the kinetic energy of the reaction products is converted into thermal energy
(in the moderator) through collisions with the molecules of the moderator. A coolant (for example water)
passing through the moderator can then extract this energy by, for example, turning the water in the coolant
into steam at high temperature and pressure. The steam can then be used to turn the turbines of a power
station, finally producing electricity.
Control rods Control rods absorb excess neutrons whenever this is necessary in order to control the rate
of energy production.
Moderator The neutrons produced in the fission reactions must be slowed down if they are to be used
to cause further fissions. This slowing down is achieved through collisions of neutrons with the moderator
atoms.
Fuel rods These are rods containing the fuel (e.g. uranium) in pellet or powder form. In the case of
uranium, the fuel rods contain a mixture of fissionable 235U and non-fissionable 238U.
Types of reactors

control rods steam control rods (can be


fuel rod
(can be raised or raised or lowered)
steam
lowered) generator
steam

water
coolant
(pressurised
water)

fuel pump water


rod
steam generator solid
moderator
Pressurised water reactor (PWR)
coolant (carbon dioxide gas) (graphite)
Gas-cooled reactor

TOPIC 8: Energy, power and climate change – Core


44

Problems with nuclear power


Plutonium production
The fast neutrons produced in a fission reaction may be used to bombard uranium-238 and produce
plutonium-239:
1
0n + 238
92U → 92U → 93Np + −1e +⎯ν
239 239 0 239
93Np → 239
94Pu + −1e +⎯ν
0

The produced plutonium-239 can then be used in the production of nuclear weapons or as nuclear fuel in
fast breeder reactors.

Radioactive waste
The spent fuel in a nuclear reactor, together with the products of the reactions, are all highly radioactive with
long half-lives. It is difficult to dispose of this material safely.

Beta decay
Even if the reactor is shut down, production of thermal energy continues because of the beta decay of the
product nuclei.

Uranium mining
Uranium mining is dangerous: uranium decays into radon gas, a known strong carcinogen. Inhalation of this
gas as well as of radioactive dust particles is a major hazard in the uranium mining business.

Test yourself 1
In a nuclear fission reaction involving uranium-235 approximately 200 MeV of energy Before you answer
is produced. How much mass of uranium is required per year in a nuclear reactor that Recall the definition of efficiency.
produces 400 MW of electrical power with an overall efficiency of 40%?

Nuclear fusion
Nuclear fusion produces energy by joining together light nuclei, as for example in the reaction:
2
1H + 31H → 42He + 10n + 17.6 MeV.

High temperatures (of order 107 K) are needed in order to bring together the nuclei which are both positively
charged and so repel each other.

High pressures are needed to ensure a high probability of nuclei colliding and then fusing.

Containment is needed because the hot plasma (electrons disassociated from nuclei) required for fusion
must be contained in such a way that temperature drops and contamination of the plasma are avoided.
This is quite difficult to achieve.

Advantages of nuclear fission energy Disadvantages of nuclear fission energy


• high power output/energy density • radioactive waste products difficult to dispose of
• large reserves of nuclear fuels • major public health hazard should ‘something go wrong’
• no greenhouse gas emissions • risk associated with production of nuclear weapons

Advantages of nuclear fusion energy Disadvantages of nuclear fusion energy


• high power output/energy density • practically none except that the process has not been made
• large reserves of nuclear fuels (hydrogen in water) to work commercially yet!
• radioactive waste products minimal

Physics for the IB Diploma


45

Solar power
Definitions
Solar constant (S) The Sun’s total power output is P = 3.9 × 1026 W. The intensity of the radiation at the
Earth’s distance from the Sun is P 2 ≈ 1400 W m−2. This is called the solar constant S and so S = 1400 W m−2.
4πd
Insolation The energy per square metre that arrives at the surface of the Earth in the course of a day.
Remember that some of the incident solar power is reflected and some is absorbed by the atmosphere.
Regional differences in insolation Insolation decreases as we move away from the equator and towards
the poles. Light travels a greater distance in the atmosphere and is incident at an angle.
Seasonal differences in insolation In the winter the days are shorter and so less energy is received.
There are two different ways to extract energy from solar radiation.

Photovoltaic systems: solar to electric


These are cells made out of semiconductors. Sunlight incident on the cell produces a dc current and a dc
voltage (by a process similar to the photoelectric effect). The currents and voltages are generally small so
photovoltaic cells are of limited use if only a few of them are used.

Solar active devices: solar to thermal


These are commonly used in many countries to extract thermal energy from the sunlight and use it to heat
water for domestic use. These simple collectors are cheap and are usually put on the roof of a house. Their
disadvantage is that they tend to be bulky and cover too much space.

Advantages of solar power Disadvantages of solar power


• ‘free’ • works during the day only
• inexhaustible • affected by cloudy weather
• clean • low energy density
• requires large areas
• initial costs high (for photovoltaic systems)

Average intensity
The solar constant is S = 1400 W m−2. This is the energy received per 1
square metre on a surface perpendicular to the Sun’s rays. The Earth This is extremely important
presents to the Sun a disc of radius equal to the radius of the Earth. for examination purposes!
This disc therefore has area πRE2. The energy incident on this disc may
be thought to be spread over the entire Earth surface of area 4πRE2,
i.e. four times the area of the disc. So the average intensity on the
entire upper atmosphere area is S ≈ 1400 = 350 W m−2. About 30% is RE
4 4
reflected, which means that the Earth’s surface receives an average
radiation intensity of 350 × 0.70 ≈ 250 W m−2.

Test yourself 2
A container holds 120 kg of water. When the container is hidden from sunlight, the temperature of the
water decreases at a rate of 3.5 × 10−3 K−1 s−1. During the day, the solar intensity is 640 W m−2. The specific heat
capacity of the water is 4.2 kJ kg−1 K−1. Calculate the area of the water that must be exposed to sunlight so that
the water temperature remains constant.

Before you answer


If the temperature is constant, what does this imply about the rate of energy loss?

TOPIC 8: Energy, power and climate change – Core


46

Hydroelectric power
Consider a mass m of water that is a height h from
some horizontal level. When this mass of water
descends a height h, its potential energy gets
water
converted into kinetic energy. The power generated is
Δm h
gh, where Δm is the change in mass in time Δt. The
Δt
change in mass Δm is given by ρΔV where ρ is the
density of water and ΔV the volume it occupies. Then turbine
ΔV
P= ρgh.
Δt ! If the surface area of the dam is A,
In a pump storage system, the water that flows to ΔV Δh
then, since V = Ah, =A and so
Δt Δt
lower heights is again pumped back to its original Δh
P = ρA gh, i.e. the power depends on
height by using the generators of the plant as motors Δt
to pump the water. Obviously, to do this requires the height of the water and the rate at
energy (more energy in fact that can be regained which the height changes.
when the water is again allowed to flow to a lower
height). This energy has to be supplied from other
sources of electric energy. But this is the only way to
! Energy conversions in a hydroelectric
store energy on a large scale. In other words, excess power plant include gravitational
electricity from somewhere else can be provided to potential to kinetic to rotational energy of
the plant to raise the water so that energy can be the turbines and finally to electric energy.
produced later when it is needed.

Advantages of hydroelectric energy Disadvantages of hydroelectric energy


• ‘free’ • very location dependent
• inexhaustible • requires drastic changes to environment
• clean • initial costs high

Wind power 1
You may be asked to reproduce
Let us consider the amount of mass that can pass
this derivation.
through a tube of cross-sectional area A with
area A
velocity v. Let ρ be the density of air. Then the mass spanned
enclosed in a tube of length vΔt is ρAvΔt. This is the by blades
mass that will exit the right end of the tube within a
time interval equal to Δt. The kinetic energy of this
mass of air is thus 1 (ρ AvΔt)v2 = 1 ρ AΔtv3. Therefore
2 2
the power is P = 1 ρ Av3.
2
v t wind

Advantages of wind power Disadvantages of wind power


• the source is the wind and so ‘free’ • works only if there is wind!
• for practical purposes it is inexhaustible • aesthetically unpleasant (and noisy)
• clean, without carbon emissions • best locations far from large cities
• ideal for remote island locations • maintenance costs high

Test yourself 3
Calculate the number of windmills that are needed to supply power to a small village whose power needs
are 5.0 MW. Each windmill has blade diameter 12 m, the density of air is 1.2 kg m−3 and the wind speed is
8.0 m s−1. Comment on your answer.

Physics for the IB Diploma


47

Wave power
The simplified case of a square profile wave
The mass raised above the undisturbed surface of
L
the water (the dotted line) is (density × volume)
ρ λ AL (ρ is the density of water). The centre of mass A A
2 2
of this body of water is now at a height of A above A
2
the undisturbed surface of the water. This mass of 2

water used to be in a trough of the wave and so its


centre of mass used to be a distance A below the
2 1
dotted line. The centre of mass is thus raised by a You may be asked to reproduce this derivation.
distance h = A and so the potential energy of this
body of water increases by:
ΔEP = mgh = ρ λ gA2L !
2 For a more realistic sine wave of the same
This is for one wave, but there are f waves per
speed and amplitude A, the power would
second where f is the frequency. The power carried
be less since the height of the water is not
is thus:
always A above or below the dotted line.
P = ΔEP f = 1 ρ gA2vL 2
2 We must then replace A by its average
The power per unit wavefront length is therefore: 2 2
P = 1 ρ gA2v value, which is A .
2
L 2

The oscillating water column (OWC) air out


As a crest of the wave approaches the cavity in the device, the column of
water in the cavity rises and so pushes the air above it upwards. The air
passes through a turbine, turning it, and is then released in the atmosphere. wave

As a trough of the wave approaches the cavity, the water in the cavity falls
and thus draws in air from the atmosphere, which again turns the turbine. water rising

Advantages of wave power Disadvantages of wave power


• the source is waves and so ‘free’ • works only in areas with large air in
• reasonable energy density waves
• for practical purposes, • wave patterns are irregular in wave
inexhaustible wave speed, amplitude and
• clean, without carbon direction – difficult to achieve
emissions reasonable efficiency over all water falling
the variables
• maintenance and installation
costs very high

Test yourself 4
Consider a wave of amplitude 1.5 m and speed v = 4.0 m s−1. Calculate the power that can be extracted from a
wavefront of length 5.0 m.

TOPIC 8: Energy, power and climate change – Core


48

Radiation
Definitions
Black body Theoretical body that absorbs all the energy that is incident on it, reflecting none.
Stefan–Boltzmann law The power emitted per unit area of a black body at absolute temperature T
is P = σT4 where σ = 5.67 × 10−8 W m−2 K−4. Thus P = σAT4.
A

The graph shows the power radiated from 1 m2 of the same surface as the I/arbitrary units
1.0
temperature of the surface is varied. The vertical axis units are arbitrary.
0.8 350 K
The area under each curve represents the total power radiated from 1 m2 of
the same surface irrespective of wavelength and equals σT4. 0.6

0.4 300 K
Most of the energy is radiated around a specific wavelength known as the
peak wavelength.
0.2
273 K
The energy radiated by a body is electromagnetic radiation and is
0
distributed over an infinite range of wavelengths. 0 0.5 1.0 1.5 2.0 2.5 3.0
/ × 10−5 m

! For the temperatures shown in the graph, the peak wavelengths


are in the infrared region of the electromagnetic spectrum.

Surfaces that are black and dull, as opposed to I / arbitrary units


polished and shiny, are good approximations to the 2.0
theoretical ‘black body’. Everything else radiates
according to P = εσAT4. 1.5

The constant ε appearing in this formula is called


1.0
the emissivity of the surface. It is a number that
varies from 0 to 1. It may be defined as:
0.5
power per unit area radiated at temp. T
power per unit area radiated by black body at temp. T
0
Surface Emissivity 0 0.5 1.0 1.5 2.0
/ × 10−5 m
black body 1.0
ocean water 0.80−0.90 The graph shows the spectra for two bodies of the same
ice 0.60−0.80 surface area and temperature but different emissivities. At
snow 0.05−0.60 equilibrium, Pnet = 0, i.e. the body loses as much energy as
dry land 0.70−0.80 it gains and so the body’s temperature stays constant and
equals that of the surroundings: T1 = T2.
forests 0.85−0.95
land with vegetation 0.75
! A body of emissivity ε that is kept at some
temperature T1, will radiate power at Pout = εσ AT14
but will also absorb power at a rate Pin = εσ AT24,
if its surroundings are kept at temperature T2.
Hence the net power lost by the body is:
Pnet = Pout − Pin = εσ A(T14 − T24).

Physics for the IB Diploma


49

The energy balance of the Earth and the greenhouse effect


Definitions
Power The rate (with time) at which energy is emitted or absorbed.
! You must know these terms well!

Intensity This is the power received per unit area, I = P . If the source emits radially in all directions then
A
at a distance d from the source the intensity is I = P 2 .
4πd
Surface heat capacity, Cs This is the energy required to increase the temperature of 1 m2 of the surface
by 1 degree kelvin. The units of Cs are J m−2 K−1. Thus for a surface of surface heat capacity Cs and area A, the
amount of thermal energy needed to increase its temperature by ΔT is given by Q = ACSΔT.
reflected power
Albedo α = . The Earth as a whole has an average albedo of about 0.30 indicating
total incident power
that it reflects 30% of the radiation incident on it. The albedo is different for different parts of the Earth
depending on type of soil, shallow or deep water, type of forestation and cloud cover.
Average intensity Recall the discussion on page 45 that the average intensity on the entire upper
atmosphere area is ≈ 1400 = 350 W m−2 and since 30% is reflected, the Earth receives an average radiation
S
4 4
intensity of 350 × 0.70 ≈ 250 W m−2 everywhere on its surface.

Mechanisms for global warming incoming


intensity radiated back
The greenhouse effect is a result of greenhouse from Sun
reflected
into space
gases in the atmosphere. Solar radiation mostly
atmosphere
passes through the atmosphere and is absorbed by
the Earth's surface. Some is then re-emitted by the transmitted
to surface absorbed IR
Earth's surface as longer-wave IR radiation. Some radiation
surface
of the IR radiation gets absorbed by the greenhouse IR re-radiated
gases in the atmosphere, and re-radiated in all radiation back to Earth

directions including back to Earth. This causes


Earth’s surface
warming of the Earth.

Test yourself 5
The surface heat capacity of a body of water is Cs = 8.7 × 107 J m−2 K−1. Radiation of intensity 800 W m−2 is
incident on the body for a period of 8 hours every day for two months. The reflected intensity is 20% of the
incident intensity. Estimate the change in temperature of the body, listing the assumptions you made.

Test yourself 6
Assume that the Earth’s surface has a fixed incoming
temperature T and that it radiates as a black body. intensity
= S α S = reflected
The averaged incoming solar radiation has intensity 4 4
S. Take the albedo of the atmosphere to be α = 0.30. atmosphere
a Write down an equation expressing the fact that
transmitted radiated back
the power received by the Earth equals the power to Earth into space
radiated by the Earth into space (an energy balance = (1−α) S = (1−α) S
4 4
equation). b Solve the equation to calculate the
constant Earth temperature. c Comment on your
answer. Earth’s surface

TOPIC 8: Energy, power and climate change – Core


50

Greenhouse gases

Greenhouse gas Natural sources Anthropogenic (man-related) sources


H2O evaporation of water from oceans,
(water vapour) rivers and lakes
CO2 forest fires, volcanic eruptions, burning fossil fuels in power plants and cars,
(carbon dioxide) evaporation of water from oceans burning forests
CH4 (methane) wetlands, oceans, lakes and rivers flooded rice fields, farm animals, termites,
processing of coal, natural gas and oil, and
burning biomass
N2O forests, oceans, soil, grasslands burning fossil fuels, manufacture of cement,
(nitrous oxide) fertilisers, deforestation (reduction of nitrogen
fixation in plants)

The mechanism of photon absorption


Molecules exist in discrete energy states just like atoms. The difference in energy between molecular energy
levels corresponds to infrared photon energies, so when infrared photons travel through a gas they will be
absorbed, exciting the molecule to a higher energy state.

Transmittance curves

Transmittance / %
CO2 CO2 CH4
Consider infrared radiation passing through the atmosphere. The graph shows 100
that the intensity of radiation after passing through the atmosphere is less than the 80
60
incident intensity emitted because some of the radiation is absorbed. The amount 40
of absorption depends on the concentration of the absorbing gas. 20
0 λ / μm
0 1 2 3 4 5 6 7 8 9
The enhanced greenhouse effect
Due to human activities the concentration of the greenhouse gases in the
atmosphere is increasing, leading to additional warming of the Earth.

Long-term evidence for global warming


Samples of ice from in Antarctica have been thoroughly • Gas concentrations are studied by analysing the air
analysed to reveal a correlation between temperature trapped in the ice.
changes and changes in carbon dioxide and methane • Peaks in carbon dioxide concentrations match peaks in
concentrations. temperature.
• The temperature is studied by measuring concentrations
The ice cores give a detailed account of global climatic
of the isotope 188O that are known to be temperature
conditions over a time period spanning some 420 000 years.
dependent.
Increased solar activity
One theory is that global warming may be due to increased solar activity that results in an increased solar
power output. The general opinion is that the pattern of global warming is not consistent with changes in
solar activity.

Volcanic activity
Other theories include increased concentrations of the greenhouse gases due to volcanic activity.

The Milankovitch cycles


There are changes in the Earth’s orbit around the Sun and these are used to introduce variations in the
received energy from the Sun. It is believed that these changes are not relevant for the climate changes on
the ‘short’ time scale of, say, the last 200 years.

Physics for the IB Diploma


51

Sea-level changes and feedback mechanisms


One of the predictions of global warming is that increased temperatures will result in rising sea levels. This is
because of water expanding in volume and ice melting.
Given a volume V0 at a temperature θ0, the volume after a temperature increase of Δθ will increase by
ΔV = γV0Δθ, where γ is a coefficient known as the volume coefficient of expansion. The coefficient of volume
expansion is defined as the fractional change in volume per unit temperature change, γ = ΔV .
V0Δθ
We must distinguish between land ice (ice supported on land) and sea ice (ice floating in seawater). Sea ice,
when melted, will not result in a change of sea level. By contrast, land ice will result in a rise in sea level.
Floating sea ice does not lead to a sea-level increase because of Archimedes’ principle: a floating body of
ice displaces water of weight equal to its own weight. So when it melts it occupies a volume equal to the
displaced water volume, i.e. there is no change in the water level.

Definitions
Feedback mechanism A change in one variable brings about a change in another variable whose effect is
to increase the change in the original variable (positive feedback), or decrease it (negative feedback).
Negative feedback Temperature increases, so more water evaporates. Evaporation causes cooling to take
place reducing the temperature and so there is more cloud cover, reducing the temperature even further.
Positive feedback Temperature increases and so ice melts. The albedo decreases which means that less
radiation is reflected, so the temperature will increase even more.
Also, with higher temperatures, carbon solubility in the oceans decreases leaving more carbon dioxide in
the atmosphere, increasing the temperature further.

Measures to reduce global warming


• Use fuel efficient cars – developing hybrid cars further
• Increase the efficiency of coal burning power plants
• Replace coal burning power plants with natural gas fired plants
• Consider methods of capturing and then storing (CCS) the carbon dioxide produced in power plants
• Increase the amounts of power produced by wind and solar generators
• Consider using nuclear power
• Be energy conscious – with buildings, appliances, transportation, industrial processes and entertainment
• Stop deforestation (trees absorb carbon dioxide)

International efforts
You must be aware of the following international initiatives:
• the Kyoto protocol (1997), an agreement aimed at reducing greenhouse gas emissions, and the more
recent Copenhagen Conference
• the Asia–Pacific Partnership on Clean Development and Climate (AP6), that urged the signatory nations
for voluntary reductions
• the Intergovernmental Panel on Climate Change (IPCC), an organisation that has undertaken a
scientifically impartial analysis of global climate.

Test yourself 7
The average depth of water in the oceans is about 3.7 km. Using a coefficient of volume Before you answer
expansion of water of 2 × 10−4 K−1, estimate the expected rise in sea level after a temperature What assumptions have been
increase of 2 K. Comment on your answer. made in this calculation?

TOPIC 8: Energy, power and climate change – Core


TOPIC 9: Motion in fields – AHL

Motion in a uniform gravitational field y

A projectile launched with speed u at any angle θ to the horizontal will follow a
parabolic path in the absence of air resistance.
uy
We treat the horizontal and vertical components of the motion independently. u

Horizontal motion Vertical motion


There is no acceleration in this Here we have acceleration of x
direction and so: magnitude g (free fall) in the 0 ux

vx = u cos θ x = ut cos θ vertically downward direction:


vy = u sin θ − gt y = ut sin θ − 1 gt2
2

The velocity–time graph shows how the components of the


velocity change with time in a uniform gravitational field.
vx

Velocity
Energy considerations
0 Time
Many problems in projectile motion can be solved faster
using energy conservation rather than the full-blown
kinematic equations. Consider this problem: a stone is vy
thrown off the edge of a cliff with a speed u = 12 m s−1 at an
angle 25° above the horizontal. The cliff is at a height h = 30 m
above the sea. With what velocity does the stone hit the water?
(Take g = 9.8 m s−2.)

At the point where the stone is thrown, the total energy of the stone is E = 1 mu2 + mgh. As it hits the sea the
2
total energy is E = 1 mv2 . Equating the two energies gives 1 mv2 = 1 mu2 + mgh, i.e. v = u2 + 2gh, which gives
2 2 2
v = 27.1 ≈ 27 m s−1. The horizontal component of velocity is 12 × cos 25° = 10.9 m s−1 and since this remains
constant this is also the horizontal component at impact. Hence the vertical component is 27.12 − 10.92
= 24.8 ≈ 25 m s−1. The angle of impact is then tan−1 24.8 ≈ 66°.
10.9

Air resistance y/m


The effect of air resistance (red circles) is to 5

• reduce the maximum height 4


• reduce the maximum range
• make the angle of descent steeper 3
• distort the shape away from parabolic.
2

0 x/m
0 5 10 15 20

Test yourself 1
A projectile is launched horizontally from a height of 12 m with a speed of 15 m s−1. Determine the horizontal
distance travelled when the body lands.

Physics for the IB Diploma


53

Gravitational and electric potential


Gravitational potential Electric potential
The work done per unit mass in moving a point mass m from The work done per unit charge in moving a (positive) point
infinity to a point near the mass M is V = W. charge q from infinity to a point near the charge Q is V = W.
m q
The unit of gravitational potential is J kg−1. The unit of electric potential is the volt (V) and is equivalent to
J C−1.
The work done is independent of the path followed. The work done is independent of the path followed.
The gravitational potential a distance r from a particle of mass The electric potential a distance r from a particle of charge Q,
M, V = − GM. V = kQ .
r r
Note: Unlike gravitation, where the sign is negative, the
sign here is positive but the charge Q in this formula must
be entered with its proper sign. Thus the electric potential a
distance of 2.0 × 10−10 from an electron is
9 × 109 × (−1.6 × 10−19)
V= = −7.2 V.
2.0 × 10−10
To find the gravitational/electric potential from more than one mass/charge, we find the potential from each mass/charge
separately and add them together. This method is necessary because potential is a scalar quantity.

Definition
Work done To move a mass m from one point in a gravitational field to another requires work. The work
done on the body by an external agent is given by W = mΔV where ΔV = Vfinal − Vinitial is the change in
potential from the initial to the final position.
The work done by the gravitational force is W = −mΔV.

Test yourself 2
The diagram shows two unequal spherical masses. At which point is the gravitational potential greatest?

A B C D

Test yourself 3
Two equal spherical masses M are a distance 2d apart. A small mass m is placed at the mid-point of the line
joining the two masses. a What was the work done to bring m from infinity to this position? b The mass m is
now moved a distance d closer to the right mass. What is the work that must be done?
2

Test yourself 4
Q y Q
Four charges of equal magnitude are placed at the vertices
of a square as shown. The origin of the axes is at the centre
of the square.
x
The electric potential is zero
A at the origin only. B along the x-axis only.
−Q −Q
C along the y-axis only. D along both the x- and y-axes.

TOPIC 9: Motion in fields – AHL


54

Equipotential surfaces
Equipotential surfaces are surfaces where the potential is the same.

The diagram on the right shows equipotential surfaces for two


equal masses or charges.

How are field lines related to equipotential surfaces? Copy the


diagram and use it to draw the field lines.
Field lines are at right angles to the equipotentials.
Can equipotential surfaces cross?
No, because at the intersection point the potential would have two
different values.
Can field lines cross?
No, because at the intersection point the field would have two different
directions and would be infinite in magnitude.
In the case of electric charges, are the charges of the same or
opposite sign in this diagram?
Opposite, because this is a case of an attractive force.

The diagram on the right shows equipotential surfaces for two


equal and opposite charges.

Note that two masses can never give this arrangement of equipotential surfaces. Why?
At the midpoint of two masses the field would be zero – it is not zero in this arrangement.

The relation between field and potential


In both gravitational and electrical fields, the field strength is the
! This means that field lines are always at
negative gradient of the corresponding potential. right angles to equipotential surfaces.

g = − dV, E = − dV
dr dr
This means that in a graph of potential versus distance the gradient
gives the (negative) field strength.

For example, for a positive point charge Q the potential is


V = kQ and so E = − d ⎛⎝ kQ ⎛⎝ = kQ as we expect.
r dr r r2

Test yourself 5
Consider this electric field.

Which set of equipotential surfaces gives rise to this electric field pattern?

0V 100 V 100 V 0V 0V 100 V 100 V 0V


A B C D

Physics for the IB Diploma


55

Gravitational and electric potential energy


Gravitational potential energy Electric potential energy
The work done in moving a point mass m The work done in moving a positive point
from infinity to a point near a mass M is charge q from infinity to a point near a charge
W = − GMm. This work is now stored as Q is W = kQq . This work is now stored as
r r
gravitational potential energy between the electric potential energy between the two
two masses: charges:
EP = − GMm [I] EP = − kQq
r r
M Q
m q
r r

In general, the gravitational potential energy In general, the electric potential energy of a
of a mass m placed at point where the charge q placed at point where the electric
gravitational potential is V is Ep = mV [II] potential is V is Ep = qV.

Note: We use [I] if m is placed near a single Note: Unlike gravitation where the sign is
mass M. We use [II] if m is placed in the negative, the sign here is positive but the
gravitational field of a collection of masses. charges Q and q in this formula must be
entered with the proper sign.

Test yourself 6
Calculate the electric potential energy of an electron in orbit around a proton when the orbit radius
is 2.0 × 10−10 m.

Test yourself 7
A proton is kept on the surface of a positively charged metallic sphere. The radius of the sphere is 0.50 m
and the potential at its surface is 180 V. The proton is now released. Calculate the speed of the proton
a as it passes a point a distance of 1.0 m from the centre of the sphere, b after it has moved an infinite
distance away from the sphere. c Sketch a graph to show the variation with distance from the centre of
the sphere of the speed of the proton.

Test yourself 8
Calculate the gravitational potential energy of a satellite of mass 3500 kg in orbit around the Earth at a
height of 520 km above the surface of the Earth. (The Earth’s radius is R = 6.4 × 106 m and its mass is
M = 6.0 × 1024 kg.)

r / 106 m
Test yourself 9 0 1 2 3 4 5 6
0
The graph shows the variation with the distance r from the centre of a planet
of radius 5.0 × 105 m of the gravitational potential created by the planet.
–0.5
a Calculate the gravitational field strength at a distance of 2.0 × 106 m from the
centre.
–1.0
b Calculate the work done to move a mass of 350 kg from the surface of the
planet to a height of 2.0 × 106 m above the surface.
c Calculate the additional work to that in b that must be performed on –1.5
the mass so that it is put in a circular orbit about the planet at a height of
2.0 × 106 m above the surface. –2.0
V / 108 J kg–1

TOPIC 9: Motion in fields – AHL


56

Motion in a gravitational field


Force considerations
A point mass m orbits a spherical mass 1
M. The orbit radius is r and the orbital r You must be able to quickly
M m
speed is v. The gravitational force derive these formulae in an exam.
provides the centripetal force on m
and so
GMm = mv2 ⇒ v2 = GM
r2 r r

The formula says that the closer m is to M the faster it moves.


For circular motion in general, we have v = 2πr where T is the period, the time for one full revolution.
T
Kepler’s third law relates period to orbital radius. Taking M to be the mass of the Sun and m the mass of
⎞2
a planet we deduce, by combining the last two formulae, that ⎛⎝2πr⎠ = GM ⇒ T2 = 4π r3
2

T r GM

Definitions
Orbital motion A satellite orbits a spherical mass M. The kinetic
energy of the orbiting satellite is EK = 1 mv2, and since v2 = GM,

Energy
2 r
we have that EK = 1 GMm. The total energy is therefore
2 r kinetic (EK)
ET = EK + EP = 1 GMm − GMm = − 1 GMm.
2 r r 2 r 0
r
total (ET)
The total energy is negative. This means that the satellite finds itself in potential (EP)

a potential well. Energy must be supplied if is to move away.

! For a satellite in orbit the total energy is


the negative of the kinetic energy.

Escape speed The minimum speed at launch at the surface of a


planet so that the projectile can move far away and never return.
The total energy at launch at the surface of the planet is
M m ET = EK + EP = 1 mv2 − GMm. For minimum escape
2 R
R speed the total energy at infinity will be zero and so by
conservation of energy: 1 mv2 − GMm = 0 ⇒ v2 = 2GM .
2 R R

1
You can be asked to manipulate these equations to get v2 = 2GMR
R2

= 2gR or v = 2⎝−
2 GM ⎛ = −2V, where both the gravitational field g
R ⎝
and the potential V are the values at the surface of the planet.

Test yourself 10
A probe is launched from the surface of the Earth with a speed that is
Before you answer
half the escape speed. How far away from the Earth does the probe get?
Use conservation of energy.
(Give your answer in terms of the radius of the Earth.)

Physics for the IB Diploma


TOPIC 10: Thermal physics – AHL

Key ideas
Definition
Ideal gas A theoretical model of a gas in which there are no intermolecular forces ! Real gases obey this law approximately
and so no intermolecular potential energy in the internal energy of the gas. An ideal
and only for a limited range of pressures,
gas obeys the equation of state PV = nRT at all pressures, volumes and temperatures.
volumes and temperatures.
The state of a gas is determined when we know the pressure, P, the volume, V,
the temperature, T and the quantity of the gas, i.e. its number of moles, n.
The gas constant R is universal and has the value R = 8.31 J mol−1 K−1.
! Use this formula to find new values of P, V, n and T
From PV = nRT we find R = PV. Therefore, if the state of a gas is
nT PV PV after a change in the state of a gas. Cross out what
changed from (P1, V1, n1, T1) to (P2, V2, n2, T2) we must have 1 1 = 2 2 . stays constant.
n1T1 n2T2

Work done
A gas in a container fitted with a movable piston exerts a force on the piston
of area A. If the piston moves out as a result of this force by a very small
amount, δx, the small amount of work done is δW = Fδx = (PA)δx = PδV, since
Aδx = δV gives the change in volume.

! If the pressure varies then we can only find the work


done from the area under a P–V diagram.

δx If the pressure is constant then the total work done for a change in volume
ΔV is W = PΔV.

Test yourself 1
Calculate the number of moles in a gas kept at temperature 300 K, volume 4.0 × 10−3 m−3 and pressure 2.0 × 105 Pa.

Test yourself 2
A gas is heated at constant volume from a temperature of 27 °C and pressure Before you answer
3.0 × 105 Pa to a temperature of 127 °C. No gas enters or leaves the container. What units must temperature have?
Calculate the new pressure.

Test yourself 3
An isolated container is divided into two equal volumes by a partition.
Before you answer
In each part of the container there is an ideal gas. They have the same pressure P.
Use common sense! You must assume
The partition is removed. Which of the following is the final pressure?
that the temperature in each half is the
P 3P
A B P C D 2P same and that it stays the same when the
2 2
© IB Organization 2008
partition is removed.
P / MPa
13 Test yourself 4
12 Calculate the work done in the expansion from a volume
of 2.0 × 10−3 m3 to a volume of 8.0 × 10−3 m3 represented by
11
the graph shown.
10

9
0 2 4 6 8 10
V / m−3

TOPIC 10: Themal physics – AHL


58

Thermodynamic processes
We may distinguish the following processes.
! It is crucial that you can define these processes!

Isobaric Isochoric Isothermal Adiabatic


Pressure stays Volume stays Temperature and internal energy stay No thermal energy enters or leaves the
constant. constant. constant in an isothermal change. system in an adiabatic change.
An isothermal change is usually slow so An adiabatic change is usually fast so
that the temperature always equalises. there is not time for thermal energy to
be exchanged.
P P P P

isobaric isothermal
isochoric adiabatic

adiabatic isothermal

V V V V

! An isothermal and an adiabatic


! An isothermal and an adiabatic
expansion from the same state: compression from the same
the adiabatic is steeper. state: the adiabatic is steeper.

The first law of thermodynamics


The first law of thermodynamics states that the thermal energy Q supplied to a system will be used to
change the internal energy, U, and/or perform work W: Q = ΔU + W.

! This law is a statement of the conservation of energy. There are conventions about signs that go along
with this law that you must know: W > 0 means work is done by a gas, Q > 0 means heat is supplied to the
system.

Test yourself 5
A gas expands at constant pressure 4.0 × 105 Pa and temperature 300 K from a volume of 2.0 × 10−3 m−3 to
a volume of 5.0 × 10−3 m−3. a Calculate the new temperature of the gas and the work done. b Has thermal
energy been provided to the gas or has it been taken out?

Test yourself 6 Before you answer


For an ideal gas a define internal energy and b state and explain how the The gas is ideal so does it have potential energy?
internal energy and the absolute temperature are related. What is absolute temperature related to?

Test yourself 7
A gas is compressed adiabatically. Explain, using the molecular model of a gas, why the temperature of the
gas will increase.

Test yourself 8
The same amount of energy Q is supplied to two equal quantities of ideal Before you answer
gases. The first absorbs the thermal energy at constant volume whereas the To determine the temperature change we must
second absorbs it at constant pressure. Which one has the larger temperature see what happens to internal energy – why?
increase?

Physics for the IB Diploma


59

Cycles in P–V diagrams and the second law


The P–V diagrams in Test yourself 9–11 below show cycles, i.e. changes that start and end at the same point.
Considering the diagram of Test yourself 10, we see that the gas does work along AB. Work is done on the
gas along CA. The net work (work done by the gas minus work done on the gas) is the shaded area of the
loop.

Test yourself 9 Test yourself 10 Test yourself 11


P P A B P A B
A

C
B
C D
C
V V V
The cycle consists of an The curved part of this cycle is The curved parts of this cycle are
isothermal and an adiabatic an isothermal. Thermal energy of adiabatics. a Show that thermal
change. a State which is which. magnitude Q1 is supplied to the energy is supplied to the gas
b Determine in which leg of the gas along AB and Q2 is removed along AB and taken out along CD.
cycle thermal energy is extracted along BC and CA. Determine b Can it be determined in which
from the gas. c In which leg is the which is greater, Q1 or Q2. leg, BC or DA the magnitude of
magnitude of the work done the ΔU is the greatest without any
greatest? further information?

The second law of thermodynamics


This law deals with a complicated concept called entropy. We will take entropy to mean the same as the
vague concept of ‘disorder’. Observations such as
• thermal energy does not flow from cold to hot objects on its own
• thermal energy cannot be converted to mechanical energy in a cyclic process with 100% efficiency
• natural processes cannot be reversed (time does not go backwards)
and others like these have led to a law of thermodynamics that explains these observations.

A statement of the second law: The entropy of the universe always increases.

When thermal energy is removed from a system its entropy decreases. (The random energy of the
molecules decreases and so we have a less disordered system.) According to the second law, some other
place in the universe must have its entropy increase by a larger amount so that the overall entropy of the
universe increases.
Even though this is not on the syllabus, it helps to know that there is a formula that can be used to calculate
the entropy change ΔS when a quantity of thermal energy ΔQ is supplied or removed at temperature T:
ΔQ
ΔS =
T

Test yourself 12
A kilogram of ice at 0 °C is placed in a warm room and melts to liquid water which eventually warms to the
room temperature of 20 °C. Discuss the entropy changes taking place and explain how they are consistent
with the second law of thermodynamics.

TOPIC 10: Themal physics – AHL


TOPIC 11: Wave phenomena – AHL and part of SL Option A

Standing waves y / cm
2
A standing wave is a wave formed when two identical travelling waves moving in
opposite directions meet and superpose. 1

x/m
0
The diagrams show, at three different times: 0.5 1.0 1.5 2.0
• a travelling wave on a string, moving towards the right (blue line) −1
• a second identical travelling wave on the same string, moving towards the
left (red line) −2

• the superposition of the two travelling waves (green line).


y / cm
2
We see that the pattern (green line) stays the same, only the amplitude
changes. This is why this is called a standing wave. The pattern does not move to
1
the right or left.
x/m
We also see that certain points on the string (x = 0, 0.5, 1.0, 1.5 and 2.0 m) always 0
0.5 1.0 1.5 2.0
have zero displacement: these points are called nodes.
−1

! It is very important to note that the distance between two consecutive


−2

nodes is half a wavelength. y / cm


2

x/m
0
0.5 1.0 1.5 2.0
Waves on strings – fixed ends
−1
Since the ends cannot move they must be nodes of
the standing wave formed on the string. −2

First harmonic (fundamental) L


The entire string length is occupied by 1 half wave.

λ1
L = 1× ⇒ λ1 = 2L
2

Second harmonic
The entire string length is occupied by 2 half waves.

λ2
L = 2× ⇒ λ2 = L
2

Third harmonic
The entire string length is occupied by 3 half waves.

λ3 2L
L = 3× ⇒ λ3 =
2 3

To create a particular harmonic then, we must shake the string (e.g. by attaching one end to an oscillator)
with the frequency of the harmonic we want to create. This will create a travelling wave on the string, which,
upon reflection from a fixed end, will create the second travelling wave moving in the opposite direction.

Test yourself 1
A string has both ends fixed. Calculate the ratio of the frequency of the second harmonic to that of the first
harmonic (fundamental).

Physics for the IB Diploma


61

Standing waves in pipes


Shown here is a pipe with the left end closed and the right open. We must have a node at the closed end since
here the molecules cannot move. At the open end we must have an antinode. The diagrams on the left show
the mathematical shape of the wave. It tell us how the molecules in the air in the pipe oscillate, shown by the
arrows in the diagrams on the right.

λ1
L = 1× ⇒ λ1 = 4L
4

λ 4L
L = 3 × 3 ⇒ λ3 =
4 3
(Only odd harmonics are present in a
pipe open at one end.)
! It is very important to understand that the graphs
on the left imply the diagrams on the right.
Differences between travelling and standing waves
• Travelling waves transfer energy, standing waves do not. (Standing waves do have energy but do not
transfer it.)
• Travelling waves have a constant amplitude, standing waves do not.
• In travelling waves, the phase changes as we move along the length of the medium. In standing waves
all points in between two consecutive nodes (points in one loop) are in phase. Points in the next loop
change phase by π with respect to points in between the next pair of nodes.

These points are also


in phase but differ in
phase by π from the
points in phase previous set of points

Test yourself 2
Two tubes have the same length. One (X) is open at both ends and the other (Y) is closed at one end and
f
open at the other. Calculate the ratio of the fundamental frequencies X .
fY

Test yourself 3
A tuning fork of frequency 560 Hz is sounded over a tube that is filled with
water. The water is slowly removed and when the length of the air column is L1
a loud sound is heard from the tube for the first time. The level of the water is L1 loud
next
slowly reduced further and the next time a loud sound is heard the length of the loud
air column is L2 with L2 − L1 = x = 30 cm. Calculate the speed of sound. L2
x

Before you answer


The tuning fork is the same so the wavelength of sound is the same in both
cases. So we must have the first harmonic in the first case and the next
harmonic in the other with equal wavelengths. What is x in terms of λ?

TOPIC 11: Wave phenomena – AHL and part of SL Option A


62

The Doppler effect


This effect is the change in the observed frequency of a wave
! The effect is described in terms of
whenever there is relative motion between the emitter and frequency and not wavelength.
the receiver.

• The horn of an approaching car is heard at a higher frequency than that emitted.
• Light from a galaxy that moves away from Earth is measured to have a lower frequency (and so higher
wavelength).
The Doppler effect has many applications. Two of the most common are to determine the speed of cars on a
highway, or the speed of blood cells in an artery.
The equations below show how the observed frequency fO depends on the speed of sound and the speeds of
source and observer.
Wavefronts from a moving source
Source moving towards observer: Source moving away from observer:
v v
fO = fs fO = fs
v − vs v + vs
vs = speed of source, v = speed of sound. stationary
observer
Observer moving towards source: Observer moving away from source:
source moving
fO = fs ⎛⎝v + vO⎛⎝ fO = fs ⎛⎝v − vO⎛⎝
v v
vO = speed of observer, v = speed of sound.

The Doppler effect for light The Doppler effect for light is more complicated because the theory
Definitions of special relativity must be used to analyse it. However, if the
Redshift The received light has a speed of the source is small compared to the speed of light we have
longer wavelength than that emitted. the approximate formula Δf = f v for the shift in frequency, where
s c

Blueshift The received light has a v is the speed of the source or the receiver and fs is the emitted
shorter wavelength than that emitted. frequency at the source. The speed of light is c.
Note that this formula can also be used for sound if the speed of
the source is much smaller than the speed of sound.

Test yourself 4
A sound wave of frequency 300 Hz is emitted towards an approaching car.
Before you answer
The wave is reflected from the car and is then received back at the emitter at
This is a double Doppler effect problem.
a frequency of 315 Hz. What is the velocity of the car? (Take the speed of sound
to be 340 m s−1.)

Test yourself 5
A child on a carousel is sounding a whistle. The frequency measured by a
Before you answer
stationary observer far away from the carousel varies between 510 Hz and
Why do you think the frequency varies?
504 Hz. The speed of sound is 340 m s−1. Use this information to calculate the
speed of rotation of the carousel.

Test yourself 6
Hydrogen atoms in a distant galaxy emit light of wavelength 658 nm. The light
Before you answer
received on Earth is measured to have a wavelength of 720 nm. Calculate the
Do we have a blueshift or a redshift?
speed of the galaxy and state whether the galaxy is approaching the Earth
or moving away from it.

Physics for the IB Diploma


63

Diffraction
This is the spreading of a wave as it goes through an wavelength comparable to aperture
A
opening (aperture) or past an obstacle.
the wave is
spreading
Diffraction is the defining phenomenon for wave
behaviour. Anything that diffracts may be called a wave.

The single slit diffraction formula


Waves of wavelength λ moving from left to right encounter a slit of opening b.

wave from top of slit b


The path difference is sin θ. Because the angle is
2
very small (in radians), this path difference is
b
wave from middle of slit approximately θ.
2
b
If this path difference is half a wavelength we will
path difference b λ
have destructive interference, i.e. when θ ≈ . This
2 2
means that we will have a minimum at a diffraction
angle θD ≈ .
λ
b
This is for the waves from the top and the middle of the slit. Considering now waves just
1
below the top and just below the middle of the slit we see that precisely the same condition You may be asked to prove
applies. So we conclude that we will have a minimum in the diffraction pattern at an this relation in an exam.
λ
angle θD ≈ .
b

On the other hand, at the centre (θ = 0) the waves arrive in phase and so we have constructive interference
and a large intensity.

The intensity of the wave as a function of the angle θ is shown in the graph. I
1.0
We have a non-zero intensity even when θ ≠ 0, i.e. the wave spreads.
0.8

! This is the basic graph for single slit diffraction


0.6

0.4
and you must know its features well.
0.2

−0.02 −0.01 0 0.01 0.02


θ / rad

Circular apertures
A more detailed analysis for a circular aperture of diameter b shows that the first diffraction minimum is
observed at a diffraction angle θD ≈ 1.22 .
λ
b

Test yourself 7
The wavelength of the wave (light) in the intensity graph above is 4.80 × 10−7 m. Calculate the width of the
slit assuming it is rectangular.

TOPIC 11: Wave phenomena – AHL and part of SL Option A


64

Resolution
Light from two point sources will diffract when it passes through an aperture. If the two
sources are separated by a small angle the diffraction patterns will merge and the two sources O
s A

will appear as one. Resolution is the ability to see as separate two objects that are separate. d
The two objects in the diagram are separated by a distance s and are a distance d from the
s
observer (O). Their angular separation is θA ≈ .
d
Rayleigh criterion

The Rayleigh criterion states that two sources are just resolved if the central
maximum of the diffraction pattern of one source falls on the first minimum of !
the other. To examine whether two sources are
resolved or not we must compare two
Mathematically this means that the angular separation θA of the sources satisfies angles, the angular separation θA and
λ
θA ≈ θD = 1.22 . Here b is the diameter of the circular aperture used to collect light λ
b the diffraction angle θD = 1.22 .
b
from the sources.

Individual patterns shown Combined pattern shown

θA ≈ θD I I
i.e.
θA ≈ 1.22 λ
b

Angle Angle

Two sources that are just resolved. The central Sources just resolved. We just barely see two
maximum of one coincides with the first minimum of separate peaks and so two sources.
the other.
θA > θD I I
i.e.
θA > 1.22 λ
b

Angle Angle
Sources well resolved. Sources well resolved. The angular separation is large.
θA < θD I I
i.e.
θA < 1.22 λ
b

Angle Angle
Sources not resolved. Sources not resolved.

Test yourself 8
Mars has a diameter of 7 × 106 m and is 7 × 1010 m from Earth. It reflects light of Before you answer
wavelength 650 nm. Does the naked human eye with pupil diameter 3 mm see To see the planet as a disc you must be
the planet as a point source of light or as an extended disc? able to resolve two points a diameter apart.

Physics for the IB Diploma


65

Polarisation
Polarisation is a property of transverse waves only.
Light is a transverse wave in which a pair of electric and magnetic fields, at right angles to each other,
oscillate. The fields are at right angles to the direction of energy transfer.
When the electric field direction and the direction of energy propagation form a fixed plane (the plane of
vibration) we say the light is polarised.

The diagram shows polarised light moving into the page. The dotted
arrow shows the direction of energy transfer and the red arrows show the
electric field (the magnetic field is not shown). On the left, the plane of
vibration is vertical, in the middle it is horizontal, and on the right it is at
about 15° to the vertical.

When the plane of vibration changes as the wave moves, the light is said
to be unpolarised. This is shown in the diagram on the right.

We usually denote unpolarised light as in the diagram on the right. Light


from light bulbs or from the Sun is unpolarised.

A polariser is a piece of plastic with a specific transmission axis. It only


allows the transmission of the component of the electric field parallel to
the transmission axis. In the diagram, unpolarised light is transmitted
through a polariser with a vertical transmission axis. The transmitted
light is therefore vertically polarised.
polarised

unpolarised

For unpolarised light passing through a polariser, the transmitted


I
! This is a result that you must know.
intensity is half of the incident intensity, I = 20.

Polarised light is blocked by a polariser whose transmission axis is at


right angles to the direction of the electric field.

The diagram shows two polarisers with their transmission axes at right
angles. Only the vertical components of the electric field are transmitted
through the first polariser. The axis of the second polariser is horizontal,
so no light emerges.

TOPIC 11: Wave phenomena – AHL and part of SL Option A


66

Malus’ law
Consider vertically polarised light that is directed towards a polariser with a vertical transmission axis. The
polariser is then rotated about the direction of the ray by an angle θ. The incident light has its electric field
vertical. We know that only the component parallel to the transmission axis gets through. The component of
the electric field along an axis parallel to the transmission axis is E0 cos θ.

transmission
axis
E0

E0 cos

transmitted
blocked

The transmitted intensity is, therefore, I = I0 cos2 θ – a result known as Malus’ law. The graph below shows
the transmitted intensity as the polariser is rotated from 0 to 180°.

I 1
1.0
You will very likely be asked to reproduce
0.8 this graph in an exam. Be sure to include
0.6 numbers on the horizontal axis.
0.4

0.2

0
0 90 180
Angle / °

Polarisation by reflection
Light will reflect off a surface. It turns out that the reflection coefficients for light with an electric field
parallel to the plane of incidence and one perpendicular to it are different. This results in reflected light that
is mainly horizontally polarised.
reflected
Brewster’s law ray electric field along
P
plane of paper
At a special angle of incidence known as Brewster’s angle the reflected ray
is completely horizontally polarised and the reflected and refracted rays 90− P
refracted
ray
make a right angle between them. (This assumes that the surface is electric field into or
not metallic.) out of plane of paper

In this case the angle of refraction is 90° − θP and so Snell’s law


gives 1 × sin θP = n × sin (90° − θP) = n × cos θP and so 1
n = tan θP, a result known as Brewster’s law. You must know how to
reproduce this proof in an exam.

Test yourself 9
Unpolarised light is incident on three polarisers that are arranged one behind the other. The transmission
axes of the first and third polariser are vertical and that of the middle polariser is at 45° to the other two.
What fraction of intensity is transmitted?

Test yourself 10
Light is moving from water (refractive index 1.33) into air. Calculate the angle of incidence such that the
light that is reflected back into the water is completely polarised.

Physics for the IB Diploma


67

Optical activity and stress analysis


Certain materials (crystals and various solutions including sugar solutions) rotate the plane of polarisation
of polarised light that is transmitted through the material. This is called optical activity. The angle of
rotation depends on the thickness of the material and, in the case of solutions, on the concentration of the
solution.

The electric field is rotating (here clockwise) as we move along the direction
of propagation of the wave. To investigate optical activity, send a vertically
polarised beam of light through the solution and then observe the beam
through a second polariser whose axis is also vertical. Now rotate the second
polariser by an angle θ until no light is transmitted. The angle by which
the solution rotated the electric field is then 90° − θ. Repeat for a different
thickness of the solution to see the dependence of angle of rotation with
thickness. The explanation of this phenomenon is very complex and has to
do with the way molecules of the material showing optical activity are put
together.

Stress analysis
A piece of plastic placed in between two polarisers with their transmission axes at right angles to each
other and illuminated with white light will show a complicated pattern of coloured and dark regions if it is
subjected to stress. The phase difference, and hence colour, depends on the amount of stress and so the
pattern seen is a stress ‘map’ of the plastic.

This phenomenon is complex. To learn more you should


look up ‘birefringence’.
these
two will
! Keep your explanations simple and break them down step
plastic under
stress
interfere

by step when you analyse these complicated processes.

Plastic is placed in between two crossed polarisers.


Light through first polariser is horizontally polarised.
Light through stressed plastic has two components at right angles.
The two components, after transmission through the second
! Two waves must have the same
polariser, are vertically polarised and so interfere. polarisation in order to interfere.

Liquid crystal displays (LCDs)


An LCD consists of a surface covered with pixels, and each pixel contains
liquid crystal molecules that are long and thin.
Light enters the first polariser. The transmitted light is vertically polarised.
The liquid crystals rotate the plane of polarisation so that the transmitted
light is now horizontally polarised.
The light thus can be transmitted through the second polariser, hit a
reflecting screen and return along the same path. The screen looks bright.
If, however, a potential difference is applied to some pixels, the
liquid crystal molecules will align and will not rotate the plane of
polarisation. The light will therefore be blocked and those pixels will
appear dark.

TOPIC 11: Wave phenomena – AHL and part of SL Option A


TOPIC 12: Electromagnetic induction – AHL

Magnetic flux
A loop of wire of area A is placed in a region of uniform magnetic field B. If the B
angle between the direction of the magnetic field and the normal to the area is
θ, then we define the magnetic flux through the loop to be Φ = BA cos θ.
area A
If the wire of the loop is wrapped around the loop N times the magnetic flux
linkage through the loop is Φ = NBA cos θ.
Think of magnetic fields as real ‘arrows’. The flux has to do with how many
‘arrows pierce the loop’s area’. The heavy arrow is the normal
to the area of the loop.

In the first diagram the field is parallel to the surface. There is


zero flux. In the second diagram the field is normal to the loop
(it is directed into the page) and so the flux is a maximum.

flux is zero flux is maximum


Here θ = 90° … and here θ = 0°.

Faraday’s law
The induced emf in a loop is equal to minus the rate of change of magnetic flux linkage with time:
ΔΦ
emf = −
Δt

If the loop is made of conducting wire then the emf will produce a current. Thus Faraday’s law creates
a current out of a changing magnetic flux.

Examples of Faraday’s law


Example 1
The magnetic field strength is increasing at a rate of 5.0 × 10−3 T s−1.
The area of the loop is 6.0 × 10−2 m2. The rate of change of flux
ΔΦ ΔB
is = A = 3.0 × 10−4 V.
Δt Δt

Example 2
The rod is pushed to the right with speed v and
so the area of the loop is decreasing, decreasing the flux in
rod v
L the loop. The rate of change of flux is
ΔΦ Δ(BLx) Δx
= = BL = BLv
Δt Δt Δt
x
Example 3
ω The loop rotates about the axis shown with constant angular frequency

= ω. The flux changes because the angle changes. Using calculus,
dt
dΦ d(BA cos θ) dθ
= = −BA sin θ = −BA ω sin θ. So the induced emf
dt dt dt

is V = − = BA ω sin θ.
axis dt

Physics for the IB Diploma


69

Lenz’s law
The direction of the induced emf is such so as to oppose the change in flux that created it. This is a
restatement of the law of conservation of energy.
This means that
• if the flux is increasing the induced current must produce a magnetic field opposite to the external field
• if the flux is decreasing the induced current must produce a magnetic field parallel to the external field.
Let’s apply this law to the three previous examples on page 68.

Example 1
The flux is increasing. The magnetic field is directed into the page. We must oppose the change, i.e. we must
decrease the flux. We do so by having a current in the loop whose own magnetic field will be out of the page,
i.e. opposite the external field. The current is then counterclockwise.

Example 2
The flux is decreasing. The magnetic field at the loop is into the page. We must oppose the change, i.e. we
must increase the flux. We do so by having a current in the loop whose own magnetic field will be into the
page, i.e. parallel to the external field. The current is then clockwise.

Example 3
The flux is decreasing initially, but after half a revolution the current will change direction. The current is
initially clockwise then changes to counterclockwise.

Another example of induced emf


Consider a conducting rod of length L that moves An electron in the rod moves with speed v and so
at right angles to a uniform magnetic field B with experiences a magnetic force Fm = evB directed to
speed v. The field is out of the plane of the page. the right. Electrons will therefore move towards the
L
right end of the rod, making it negatively charged
and the left end positively charged. An electric field
E will therefore be established in the rod (from right
to left) opposing any further motion of electrons to
v the right: evB = eE ⇒ E = vB. This means there will
be an emf induced at the ends of the rod of
V
magnitude V such that E = L , i.e. V = BLv.

Test yourself 1
In example 2 above the rod is given an initial velocity to the right and is then left Before you answer
alone. Explain why the velocity of the rod decreases. A lamp placed in the loop Looking for where the energy comes from
will light up. State and explain where the energy comes from. means looking for something doing work.

Test yourself 2
A battery is connected in series to a device D. The switch is closed at t = 0. I/A
1.0

The current in the device varies with time 0.8


12 V
as shown. Suggest what device D is 0.6
and calculate its resistance.
0.4

0.2
D
0 t/s
0 1 2 3 4 5 6

TOPIC 12: Electromagnetic induction – AHL


70

Alternating current
Flux / Wb
Electricity for commercial and home use comes mainly from generators that involve a coil
rotating in a magnetic field. If the coil is rotating at a constant rate, the flux varies with time
according to the graph. In this example the coil rotates with a period of 20 ms. 0 t / ms
5 10 15 20 25 30
The corresponding induced emf and current in a domestic supply are shown below.

V / kV V0 I / kA I0
15 0.3
10 0.2
5 0.1
0 t / ms 0 t / ms
–5 5 10 15 20 25 30 –0.1 5 10 15 20 25 30
–10 –0.2
–15 –0.3

The current has the same dependence on time as the voltage (they are ‘in phase’)
Notice that when the flux is zero the emf (and the current) have large values and vice versa.

Rms values
The rms current is that current which in a dc circuit would give the same power dissipation as the average
power in the ac circuit.
The voltage and current in an ac circuit have peak values called V0 and I0. We define the rms values of the
voltage and current through

V0 I0 ! Do not use these formulae if you are asked to define


Vrms = Irms = .
2 2 rms values. Use the definition in words above.

15.5
In the graphs above, V0 ≈ 15.5 kV and I0 ≈ 0.30 kA so that Vrms ≈
0.30 2
≈ 11 kV and Irms ≈ ≈ 0.21 kA. (The resistance of the circuit is thus R
15.5 2
= ≈ 52 Ω).
0.3

Power P / kW
Because the voltage and the current constantly vary in an ac circuit, the 4000
power dissipated in a resistor also varies. The average power dissipated 3000
2000
(which is half of the peak power) is given by the usual formulae of dc
1000
circuits, provided we use rms quantities. t / ms
0
0 5 10 15 20 25 30
2
V
Pave = VrmsIrms = = RI 2rms
rms
R

Transformers
Consider two coils: a primary and a secondary with Np and Ns turns of
wire, respectively. An alternating voltage Vp is applied to the primary coil.
Because the magnetic field it produces is varying, the flux linkage in the
secondary coil is also changing and so an emf Vs is induced such that
Vp Np primary coil secondary coil
= .
Vs Ns

Assuming a perfectly efficient transformer, we have that the power in the ! Transformers can only be used with
secondary coil equals that in the primary coil and so VpIp = VsIs. alternating current.
I N
Therefore Ip = N s . Transformers do not change the
s p
frequency of the ac current.

Physics for the IB Diploma


71

Power loss in transmission


Power loss in cables is reduced by transmitting the power at high voltage. This requires transformers.

A power station must produce a large amount of power. Assume that power produced is P = 500 MW at a
voltage V. A current I will then flow into the external circuit. Then P = VI.

Let R be the total resistance of the cables. The power lost in the cables is Plost = RI2.

To minimise this loss the current must be as small as possible. This means that V must be large. A
transformer must therefore be used to step up the voltage to a high enough value.

Suppose that the voltage at which the power is produced is a low 50 kV. The current is
I = 500 MW = 104 A
50 kV
and so the power lost is Plost = RI2 = R × 108.

With a higher voltage, say 200 kV, the current is less,


I = 500 MW = 2.5 × 103 A
200 kV
and the power lost is Plost = RI2 = R × (2.5 × 103)2 = R × 6.25 × 106, i.e. 16 times less.

A step-down transformer must then again be used to reduce the voltage to a suitable value for supplying to
consumers.

Test yourself 3
The graph shows how the emf in the primary coil of an ideal transformer varies with time. There are
900 turns of wire in the primary coil.
a Draw a sketch graph to show how the Emf / V
magnetic flux in one loop of the primary coil 200
varies with time.
b The emf in the secondary coil has a peak 100
value of 16 V. Calculate i the rms value of the
voltage in the secondary coil and ii the number
0 t / ms
of turns in the secondary coil. 10 20 30 40
c The current in the secondary coil has an rms
value of 2.4 A. −100
i Calculate the resistance of the secondary coil.
Calculate ii the average and iii the peak power −200
in the secondary coil.
d Draw a sketch graph to show how the power
in the secondary coil varies with time.

TOPIC 12: Electromagnetic induction – AHL


TOPIC 13: Quantum physics and nuclear physics –
AHL and SL Option B
The quantum nature of radiation
Definitions
Photoelectric effect The emission of electrons from a metal surface when electromagnetic radiation is
incident on the surface. This is evidence for the behaviour of light as photons, i.e. as particles or quanta of
energy.
Work function (φ) The minimum energy required to eject an electron from a metal.

The key experimental facts are:


1 The kinetic energy of the emitted electrons depends on the light frequency and not the light intensity.
2 The light intensity only affects the number of electrons emitted (i.e. the photocurrent).
3 There is a frequency (the threshold frequency) below which no electrons are emitted (no matter how
large the intensity).
4 Electrons are emitted within one nanosecond from the incidence of light on 1
You must be prepared to
the surface, i.e. with essentially no time delay.
explain how the photon theory
explains these observations.
These facts are in contradiction with the classical wave theory of radiation.

Einstein’s explanation based on photons


Light is made up of particles called photons – bundles or quanta of energy. The mechanism for emitting
electrons is that one electron absorbs one photon, each of energy E = hf. If the minimum energy to escape
from the metal is φ (the work function) then the electron is emitted
with kinetic energy EK = hf − φ. light
collecting plate

The stopping potential is that potential for which the photocurrent electron
in a photoelectric experiment becomes zero. This means that the
photosurface G
kinetic energy of the electrons just becomes zero when they reach the
evacuated tube
collecting plate. Then, since the electric potential at the photosurface
is Vs and the potential at the collecting plate is zero, by energy variable voltage
conservation: Emax + (−e)Vs = 0 + 0, i.e. Emax = eVs.

Test yourself 1
The work function of a metal surface is 1.8 eV. Before you answer
Monochromatic light of wavelength 4.8 × 10−7 m You want to find speed so you can first find the
is incident on the metal. Calculate a the threshold kinetic energy of the electrons. What is the equation
frequency and b the speed of the emitted electrons. relating kinetic energy and frequency? How do you
find the frequency when you know the wavelength?
Test yourself 2
The graph shows the variation with frequency V/ V
of the stopping voltage in a photoelectric experiment. 4
The line of best fit has been extrapolated to
2
zero frequency.
0 f / ×1014 Hz
Calculate the work function of the metal and a value 5 10 15 20
for the Planck constant. −2

−4
Before you answer
What is the equation relating stopping
voltage and frequency?

Physics for the IB Diploma


73

Wave nature of matter


De Broglie’s hypothesis states that all moving particles (electrically charged or neutral) show wave
behaviour with a wavelength given by λ = h , where h is the Planck constant and p the momentum
p
of the particle.

! This does not mean that particles move along sine wave paths!
It means that particles may show interference and diffraction effects.

The diagram shows the apparatus used for verifying de Broglie’s hypothesis. electron
gun
The wave nature of electrons can be seen in electron diffraction experiments V
in which a beam of fast electrons is directed at a crystal. The electrons diffract
off the regularly spaced crystal atoms and create a diffraction pattern, similar detector
to that created by light.
electron
At the minima of the diffraction pattern the electron waves interfere beam
destructively and cancel each other out. No mass or momentum would crystal
be measured there. This situation would be absurd if we insisted on an
interpretation of the experiment in terms of electrons as particles.

There are many electrons in the regions of this image that are white. There are no
electrons in regions that are dark.
The image is very similar to that of diffraction of ordinary light by a circular aperture.
Calculations of the wavelength from the observed diffraction pattern agree with the
de Broglie formula.

Test yourself 3
Calculate the de Broglie wavelength of an electron that has been accelerated from rest through a potential
difference of 250 V.

Before you answer


What is the work done when a charge is accelerated through a pd
– and what becomes of this work? Think of a convenient formula for
kinetic energy in terms of momentum.

Test yourself 4
Explain why an electron microscope can resolve objects that cannot be resolved using visible light.

TOPIC 13: Quantum physics and nuclear physics – AHL and SL Option B
74

The Bohr and Schrödinger models


Niels Bohr showed that the energy of the electron in the hydrogen atom is given by En = − 13.6 eV, i.e. it is
n2
discrete or quantised.

! Compare the energy levels of hydrogen with those for the electron in the box.
Every time an electron makes a transition from a high energy state to a lower one it emits one photon.
The photon energy is equal to the difference in energy between the levels of the transition. See Topic 7,
page 37.

The Schrödinger theory


This is the current theory of atoms and molecules. Unlike Bohr’s theory, it can be applied to any atom.
Electrons are described by wavefunctions. The wavefunction squared is a mathematical probability density
function (a pdf) that can be used to calculate the probability for finding an electron in a small volume δV in
the neighbourhood of a point:
probability = |Ψ|2δV
Since there is only a probability for finding the electron somewhere this implies that we cannot think of the
electron as localised in space. There is only an electron cloud around the nucleus. This is consistent with the
Heisenberg principle (see later).
Imposing boundary conditions on the wavefunction determines the energy.
The theory predicts energy levels with discrete energies for the electrons in atoms and also predicts the
intensities of the spectral lines (something the Bohr model does not do).

The graph on the right is a wavefunction where the electron has a well- ψ
defined wavelength. Since the wavelength is related to momentum
through the de Broglie formula λ = h a small uncertainty in wavelength
p
means a small uncertainty in momentum. In turn this implies a large x
uncertainty in position. We don’t really know where this electron is.

ψ electron is
somewhere
in here
For this electron, the wavefunction allows the determination of the
position of the electron with a low uncertainty. In turn this implies a large x
uncertainty in momentum.

Test yourself 5
The graph shows the variation with position of the ψ

wavefunction of an electron confined within a region


of linear size 1.0 × 10−10 m. electron is
somewhere
in here
a State what is meant by a wavefunction.
b Use the graph to estimate i the momentum of the 0 x / × 10−10 m
electron and ii the kinetic energy of the electron. 0.2 0.4 0.6 0.8 1.0
c State one position where it is highly unlikely for this
electron to be found.

Physics for the IB Diploma


75

The Heisenberg uncertainty principle and the particle in the box model
The Heisenberg uncertainty principle
The Heisenberg uncertainty principle states that it is not possible, in principle, to determine both the
position and the momentum of an electron with infinite precision at the same time. The more accurately the
position is known the more inaccurately the momentum is known, and vice versa.
Δx Δp ≥ h

Δx, Δp are the uncertainties in the measurement of position and momentum and h is the Planck constant.
The principle also applies to measurements of energy and time: in measuring the energy of a state, a
measurement that is completed within time Δt results in an uncertainty ΔE in the measured value of the
energy.
ΔE Δt ≥ h

The particle in the box model


Imagine an electron that is free to move along a line of length L. Imposing the condition that the wave
associated with the electron is zero at the ends of the line means that the wave of the electron must be a
standing wave with nodes at the ends of the line. This implies that the wavelength of the electron is 2L
n
where n is an integer.
Notice that imposing boundary
conditions (e.g. nodes at the
ends) determines the wavelength
and in turn the energy.
n = 1, λ = 2L n = 2, λ = L

The momentum is therefore p = h = h = nh and so the kinetic energy is


! The energy levels arise
λ 2L 2L
2 2 2
n because the wave of the
EK = p = n h 2.
2m 8mL electron must be zero at
2 2 2
These are discrete energies. The energy can only take the values h 2, 4h 2, 9h 2, … . the ends.
8mL 8mL 8mL
Notice that the lowest possible energy of this electron is (for n = 1),
2
E
EK = h 2, i.e. EK is non-zero. This electron cannot be at rest! This is
8mL
consistent with the uncertainty principle. n=3

n=2
! This model is too unrealistic. For one thing it does not take into account forces on n=1
0
the electron (e.g. electrical). As n increases the difference in energy between levels
increases. In real atoms the opposite is true.

Test yourself 6
An electron is confined within a hydrogen atom of linear size 10−10 m. Using
Before you answer
the uncertainty principle, estimate that the kinetic energy of the electron is at
The uncertainty in the position of the electron
least a few eV, explaining your working.
is of the order 10−10 m.

Test yourself 7
The energy of an excited level is to be measured. The electron will only stay in that Before you answer
excited level for less than 0.1 ns. a What is the uncertainty in the measured value of the How is the wavelength of a photon
energy level? b State and explain what your answer in a implies about the wavelengths in a transition calculated?
of spectral lines.

TOPIC 13: Quantum physics and nuclear physics – AHL and SL Option B
76

Distance of closest approach


An alpha particle of electric charge 2e and kinetic energy Experiments of this kind show that
EK is directed head on at a nucleus of atomic number Z. The the radius of a nucleus with nucleon
alpha particle will come to rest (for an instant, and will then number A is approximately given by
be repelled) a distance d from the centre of the nucleus where R ≈ 1.2 × 10−15 × A1/3 m and this implies that
EK = k (2e)(Ze) ⇒ d = k (2e)(Ze). all nuclei have approximately the same
d EK density, about 2 × 10−17 kg m−3. This
We see that the kinetic energy of the electron gets is because, density = mass ∝ A
transformed to just electric potential energy at the point of volume (A1/3)3
independent of A.
closest approach.

The mass spectrometer


ion source The mass spectrometer is an instrument that may be used to
measure atomic masses. It consists of (1) a velocity selector, (2)
collimators, (3) a magnetic field to bend ions into circular paths
and (4) a detector (photographic film). In (1) ions of positive
− +
1 charge q enter a region of crossed electric and magnetic fields.
2
photographic
The ions that continue undeflected satisfy qvB = qE ⇒ v = E .
4 plate B
Thus the beam that passes through the collimators (2) consists of
B into the
ions of the same speed v. The ions enter the region of the second
3
page magnetic field (3) and are bent into circular paths of various radii
2 mv
depending on the mass of the ions: qvB′ = m v = Ri = i . Thus
R qB′
different radii Ri imply isotopes of different mass to charge
ratios.

Test yourself 8
A proton (to be treated as a point particle) is accelerated from rest Before you answer
by a potential difference V. The accelerated proton is directed at a What is the kinetic energy of the proton after
nucleus of molybdenum (96 42Mo). Given that the radius of a nucleus acceleration? What becomes of this kinetic energy when
of mass number A is R ≈ 1.2 × 10−15 × A1/3 m, calculate the value of the proton just stops on the surface of the nucleus?
the accelerating potential if this proton just reaches the surface of a
nucleus of molybdenum.

Test yourself 9
The ratio of mass to charge was measured for a sample of a pure element in a mass spectrometer. The values
obtained were
m m m m
17.5 q 18.5 q 35.0 q 37.0 q
m
where q is the mass to charge ratio for hydrogen (11H) nuclei. The data suggest that two isotopes are
present with masses of
A 17.5 u and 18.5 u B 17.5 u and 37.0 u C 18.5 u and 35.0 u D 35.0 u and 37.0 u

© IB Organization 2008

Before you answer


m
Try to understand the meaning of the number in front of q . Hydrogen (11H) nuclei have q = e and
m = 1 u. Our sample has m = A u and the charge can be a multiple of e – the atoms may not be just
singly ionised.

Physics for the IB Diploma


77

Nuclear energy levels


It is an important fact that the alpha and gamma particles produced in radioactive decay have discrete
energies.
This can be explained in terms of nuclear energy levels. The protons and neutrons in a nucleus exist in
discrete energy levels just as the electrons in atoms do. In a transition from one energy level to a lower one
the emitted alpha or gamma particles have the discrete energy that is the difference in energy between the
levels involved.
For the two alpha decays shown in the diagram The diagram below shows a gamma ray photon
94Pu → 2α + 92U) the energies released are
below (242 4 238
emitted in the decay of a nucleus of 24 24
12Mg ( 12Mg
4.983 − 0.307 = 4.676 MeV and 4.983 − 0.148 → 0γ + 12Mg), with energy 5.24 − 1.37 = 3.87 MeV.
0 24

= 4.815 MeV.
E / MeV
E / MeV
plutonium 6.01
4.983
5.24

4.24
α 4.12
α
γ

1.37

0.307 0
0.148
0.045
0
uranium

By contrast to alpha and gamma energies, beta particle (i.e. electron) energies E / MeV
are continuous! 211
83 Bi
8.17
Shown in the diagram to the right are the decays: 211
84 Po β
7.60
211
83Bi → 0
−1e + 211
84 Po + ⎯ν
0
0
211
84Po → α+
4
2
207
Pb
82
α
In beta minus decay a third particle is produced: the antineutrino. The three
particles then share the available energy in many different ways depending on
their direction of motion. The electron in the beta minus decay above would 207
82 Pb
always have an energy of (approximately) 8.17 − 7.60 = 0.57 MeV if there was no 0
antineutrino produced, but this is not the case. The electrons in these decays
have an energy that ranges continuously from 0 to a maximum of 0.57 MeV.

19K → 18Ar + +1e + ν where a positron


This is similar in beta plus decay such as 40 40 0

and a neutrino are produced.

Test yourself 10
a State the experimental evidence in support of nuclear energy levels. b Use the energy level diagram for
94Pu → 2α + 92U photons are also expected to be emitted.
plutonium to explain why in the alpha decay 242 4 238

Test yourself 11
In nuclei, nucleons exist in nuclear energy levels, and in atoms, electrons exist in atomic energy levels. The
order of magnitude of nuclear energy levels is 1 MeV whereas the energy of atomic energy levels is of the
order 1 eV. Use this information and the particle in the box model to make an order-of-magnitude estimate
of the ratio size of atom .
size of nucleus

TOPIC 13: Quantum physics and nuclear physics – AHL and SL Option B
78

Radioactivity
Definitions
Radioactive decay law The rate of decay is proportional to the number N of nuclei present that have not
dN
yet decayed: = −λ N.
dt
The decay constant The constant λ is called the decay constant and is the probability of decay
per unit time.
Activity, A The number of decays per second. Initial activity A0 = λ N0.
Half-life, I1/2 The time taken for the activity of a sample to halve.
The radioactive decay law implies that N = N0e−λt and A = λN0e−λt, i.e. the number of nuclei that have not yet
decayed after time t and the activity after time t are both given by exponential decay laws.

If we know the molar mass of a pure radioactive sample, we can determine the number of
nuclei present, N0, by measuring the mass of the sample. Measuring the initial activity, A0, ! The method described
then allows determination of the decay constant (through λ N0 = A0) and hence the half-life.
here is useful for
determining very long
Recall that, after a half-life, the initial activity of a sample is reduced by a factor of 2. The decay
half-lives.
constant and half-life are related by λT1/2 = ln 2, which can be derived as shown below.
A = A0e−λt
A0 1
= A0e−λT1/2
You may be asked to derive this
2
e−λT = 1
1/2 relation in an exam.
2
λT1/2 = ln 2

Test yourself 12
38Sr) is 2.5 × 10 Bq. Estimate the half-life of
The activity of a 50 g freshly prepared sample of strontium (90 14

strontium.

Test yourself 13
The half-life of an isotope is 2.45 minutes. Calculate the fraction of the original activity of the isotope 1.00
minute after it has been prepared.

Test yourself 14
An isotope X has a half-life of 2.0 minutes. It decays into isotope Y that is stable. Initially no quantity of
isotope Y is present. After how much time will the ratio of the number of Y nuclei to X nuclei be equal to 4?

Test yourself 15
An isotope X decays into an isotope Y that is itself N / 1020
unstable. Isotope Y decays to a stable isotope Z. The 10
graph shows the variation with time of the numbers 8 X
of the nuclei of isotopes X and Y that have not yet
decayed. Initially, the number of nuclei of isotope Y 6
is zero. Y
4
Estimate the half-lives of isotopes X and Y,
2
explaining your method.
0 t / min
Before you answer 0 1 2 3 4
Why must you look beyond 2.5 minutes
to calculate the half-life of Y?

Physics for the IB Diploma


TOPIC 14: Digital technology – AHL and part of SL Option C

Binary numbers
A binary number is a number expressed in base 2 and consists of 0s and 1s. A sequence of 0s and 1s is called
a word.
A number that is expressed in base 10 is called a decimal number. For example the number 5037 can be
written as
5037 = 5 × 103 + 0 × 102 + 3 × 101 + 7 × 100
In other words, the digits we use to express the number are the coefficients of powers of 10 as shown above.
In the same way we can express binary numbers where now we will use powers of 2 rather than 10. Thus,
since 5 = 1 × 22 + 0 × 21 + 1 × 20 we express the decimal number 5 in binary form as 52 = 101. The coefficients
we use are 0 or 1. Similarly the number 12 is
12 = 1 × 23 + 1 × 22 + 0 × 21 + 0 × 20
122 = 1100
Given a number in binary form, we call the leftmost digit (starting from the left) the most significant bit
(MSB) and the digit the number ends with the least significant bit (LSB). For example, 0 111 0 .
MSB LSB

Analogue and digital signals


V

t t
Analogue signals are continuous signals, varying between A digital signal is a coded form of a
two extreme values in a way that is proportional to the signal that takes the discrete values
physical mechanism that created the signal. 0 or 1 only.

Compact disc (CD)


A CD is a device on which information can be stored in digital form. The analogue signal (e.g. music) is first
converted into a digital signal (a series of 0s and 1s). This sequence is now imprinted on the CD by making
marks (called pits) on the CD. The edge of a pit corresponds to binary 1. A series of pits is then made along
a path that spirals from the centre of the disc outwards. The distance between adjacent paths is very small,
about 1600 nm.

The diagram shows two rays in the laser beam. One reflects d pit land
from a pit and the other from a land. The reflected rays will
interfere. The path difference is 2d and so if 2d = λ the
2
two reflected rays will interfere destructively. This is how the
laser beam
edge of a pit is detected and assigned binary 1. In
other words the pit depth must be d = λ . So with a !
4
wavelength of 600 nm we need a pit depth of 150 nm. You must be able to explain the relation d = λ .
4

Test yourself 1 Test yourself 3


Express the 5-bit binary number 10101 as a decimal. Information is being imprinted on a CD at a rate of 44 100
words per second. The information consists of 32-bit
Test yourself 2 words. A CD lasts for 74 minutes. Calculate the storage
How many numbers can be represented with capacity of a CD.
5-bit words?

TOPIC 14: Digital technology – AHL and part of SL Option C


80

Analogue and digital storage devices


LPs (analogue) LPs have a very limited storage capacity and are subject to damage (by scratches
and dust).
Cassettes These devices use magnetic recording to store data in analogue form. The cassette is
(analogue) a sequential device, i.e. to access information stored you must first go through all the
information stored before the point you want to access.
Advantages Disadvantages
• low price • easily damaged by exposure to high
• can be easily erased and reused temperatures and careless handling
• sequential storage of data
Floppy disks Data are stored magnetically (in much the same way as on the cassette) but the
(digital) information imprinted is coded into 0s and 1s.
Advantages Disadvantages
• easily erased and reused • limited quantity of data
• direct access device • damaged by exposure to high temperatures
and careless handling
• corrupted by magnetic fields
DVDs Similar to the CD (see page 79) but here the pit length is shorter than on a CD
(digital) allowing more data to be stored along the spiral. In addition, data can be stored on
both sides of the disc or in a double layer on the same side. Since the pit length is
shorter the wavelength used must be smaller as well.
Hard disks Once used only in computers, hard disks can now be found in digital cameras and
(digital) digital video recorders, mobile phones and other such devices. The disk may be
thought to be divided into a very large number of tiny regions (the size is of order
10−6 m) and each such region is the seat of a 0 or a 1 of digitised data. The data can be
accessed almost instantly irrespective of its position on the disk.

Advantages of digital storage


These advantages include:
• huge capacity for data storage in digital devices
• fast access to and retrieval of stored data
• storage is reliable and can be encrypted
• stored data can be copied or erased easily
• data can be processed and manipulated by a computer
• data can be transported easily physically as well as electronically.

On the negative side, whereas an analogue storage system such as ordinary photographic film degrades
slowly with time, a serious error with a digital storage device is usually catastrophic in the sense that the
data may never be recoverable. Digital storage thus requires back-up storage.

Physics for the IB Diploma


81

The CCD
Capacitance, C
Capacitance is the amount of electric charge that can be stored on a body per unit voltage. The unit of
capacitance is the farad (1 F = 1 coulomb per volt.).
For a body of capacitance C and voltage V the charge that can be stored is Q = CV.

The charged-coupled device (CCD)


CCDs are used to create images in a wide range of the electromagnetic spectrum.
The CCD is a silicon chip that is covered with light sensitive elements called pixels (picture elements).
Typical chip sizes vary from 20 mm × 20 mm to 60 mm × 60 mm.
Each pixel releases electrons when light is incident on the pixel (through a process similar to the
photoelectric effect). A pixel acts as a small capacitor. The electrons released in the pixel correspond to a
certain amount of electric charge Q and therefore a certain potential difference V develops at the ends of the
Q
pixel equal to V = C , where C is the capacitance of the pixel. The value of V can be measured with
electrodes attached to the pixel.
Pixels vary in size from 5 × 10−6 m to 25 × 10−6 m.

Image formation
The amount of charge (and hence the voltage V) is proportional to the intensity of light incident on the
pixel. This means that if we can measure the voltage in each pixel we will know the intensity of light in each
pixel, i.e. we will have an image.
Measuring the voltage
The idea is to measure the voltage in a particular pixel as well as the position of that pixel.
Charge is created in each pixel when the shutter of the camera (for example) opens. Charge accumulates in
the pixel. By appropriately changing the potential, the charge in each pixel in the same row is made to move
downwards.

Eventually, the charge in each pixel in the same


row gets to a register where the voltage is amplified,
measured and converted into digital form (in the
one pixel
analogue-to-digital converter, ADC) until the charge
in the entire row is read. The computer processing all
this now has stored two pieces of information. The
first is the value of the voltage in each pixel and the
second is the position of each pixel. The process is ADC
register
now repeated with the next row until the voltage in
each pixel in each row is measured, converted and
stored.
Each row is coupled to the next, hence the term
‘charged coupled device’.

Test yourself 4
The capacitance of a pixel is 25 pF. Calculate the voltage on the device when electrons accumulate in the
pixel at a rate of 2.0 × 108 s−1 for 30 ms.

TOPIC 14: Digital technology – AHL and part of SL Option C


82

CCD characteristics
Definitions
Quantum efficiency (QE) The ratio of the number of electrons emitted to the number of incident
photons. A high QE means you can acquire the image in less time.
One of the great advantages of the CCD is their very high quantum efficiency. It ranges between 70%
and 80% (depending on the wavelength of light used). This is to be compared to 4% for the best quality
photographic film and 1% for the human eye.
Magnification The ratio of the length of the image as it is formed on the CCD to the actual length of
the object.
Resolution A CCD just resolves (i.e. ‘sees’ as distinct) two closely spaced points on the object if the images
of these points are separated by at least a distance equal to 2 pixel lengths. (This means there is at least one
empty pixel in between the images.)
High resolution implies that more detail can be seen in the image.
Notice that there is an additional constraint on resolution from diffraction. To ‘see’ two pixels as distinct
their separation must be larger than the wavelength of light used. With a pixel size of 5 × 10−6 m and visible
light (λ ≈ 10−7 m) this condition is easily satisfied. Diffraction would cause problems for pixels of much
smaller size.

Uses of CCDs
Apart from their use in digital cameras and video recorders, CCDs have revolutionised endoscopy in
medicine and they are also used as X-ray detectors in both medicine and astronomy. Their use in astronomy
has made possible the formation of images of greatly different brightness in the same photograph. With
photographic film the brighter object tends to wipe out the fainter object.

Advantages of CCD images over those on film


• Image is digital and so can be manipulated/stored/transmitted with a computer.
• The quantum efficiency is high so fainter images can be recorded in less time.
• The response is uniform over a wide range of wavelengths.
• Faint as well as bright objects can both be seen clearly in the same image.

Test yourself 5
Light of intensity 6.8 × 10−4 W m−2 and wavelength 5.0 × 10−7 m is incident on the collecting area of the CCD of
size 30 mm × 30 mm with 2.0 × 106 pixels (i.e. 2.0 Mpixels).
a Calculate the number of photons incident on each pixel in a period of 25 ms.
b The capacitance of a pixel is 22 pF. Calculate the potential difference across the pixel assuming a quantum
efficiency of 80%.
c Determine if this camera can resolve two points a distance 0.025 mm apart, assuming a magnification of 1.4.

Physics for the IB Diploma


OPTION A: Sight and wave phenomena – SL

(For this option you will need to study the material in this chapter as well as all of Topic 11.)

The eye
The eye is almost spherical in shape with a diameter of about 2.5 cm.
Its main parts are shown in the diagram.

Definitions
Cornea A transparent membrane through which light enters the eye. pupil
iris cornea
Most of the refraction takes place here. anterior chamber
(aqueous humour)
Aqueous humour A liquid-filled chamber in between the cornea
lens ciliary muscle
and the eye lens.
Iris A coloured membrane covering the eye lens. retina
Pupil An aperture in the iris through which the light enters the eye
lens. The pupil can increase or decrease its diameter in order to adjust vitreous humour
to varying intensities of light.
Eye lens Provides some of the refraction of light rays through the eye.
Ciliary muscle Muscle attached to the eye lens by ligaments.
It controls the curvature of the lens.
Retina Membrane covering the back of the eye with light sensitive optic nerve
fovea
cells.
Cone and rod cells There are two types of cells on the retina, rods
and cones. Close to the beginning of the optic nerve and essentially on
the principal axis of the eye, is an area called the fovea, a spot of diameter of about 0.25 mm, where vision is
exceptionally acute. This is filled with cones each connected to a different nerve fibre (unlike elsewhere on
the retina, where many different cones are connected to the same fibre).
Distribution of cones and rods on the retina At the fovea there are many cones but no rods. The density
of cones at the centre of the fovea reaches 150 000 per mm2. The rods are mainly found at the edges of the
retina (i.e. away from the principal axis of the eye) whereas the concentration of the cones increases as we
approach the fovea.

Test yourself 1
Explain why in low intensity light it is easier to obtain a clearer image of an object by peripheral vision, i.e. by
looking at the object a bit sideways rather than directly at it.

OPTION A: Sight and wave phenomena – SL


84

Sight
Definitions
Depth of vision The range of distances from the eye within which an object can be moved and still be
seen acceptably clearly. The depth of vision depends on the distance to the object. The further the object is
from the eye, the larger the depth of vision. If the object is put close to the eye, the depth of vision is greatly
reduced. However, if brighter light is used the depth of vision will increase. This is because in brighter light
the pupil diameter will decrease.
Accommodation The ability of the eye lens to change its focal length. This is done by contractions of the
ciliary muscle. When the muscle is relaxed, the lens is thin and the eye can focus on distant objects without
fatigue. By contrast, when the muscle is tensed, the lens is fat and the eye can focus on objects nearby. This is
an active process leading to fatigue.
Near point distance The nearest distance at which an object can be seen clearly, without undue strain on
the eye, is called the near point of the eye. For a normal healthy eye this distance is 25 cm.
Far point distance The furthest distance the eye can focus on clearly; for all practical purposes this may be
taken to be infinity.
Scotopic vision Vision in which rods are the main detectors of the incident light in the eye.
Photopic vision Vision in which the cones are the main detectors of the incident light. There are three
types of cones, each sensitive to a different colour.

Scotopic vision Photopic vision


used at night and when there is very little used during the day and when there is a lot
light available (because many different rods of light available
are connected to the same nerve fibre)
distinguishes shapes but not colours distinguishes shapes and colours
distinguishes little detail distinguishes a lot of detail

Spectral response of rods and cones


The graph on the left shows that rods are more responsive to light of low wavelength. The graph on the right
shows the response of the cones to different wavelengths. The dotted curve in the graph on the right is the
response of the rods.

rods
Relative absorption
Relative absorption

cones

rod

0 400 500 600 700


Wavelength / nm violet blue cyan green yellow red
Wavelength / nm

Use these spectral response graphs to answer Test yourself questions 2 and 3.

Test yourself 2
Red and blue papers are viewed in low-intensity light. State and explain which one will be most clearly seen.

Test yourself 3
In bright sunlight, red roses appear brightly red but in twilight, their red colour ‘fades’. Explain this observation.

Physics for the IB Diploma


85

Colour and colour perception


The perception of colour is made possible by the fact that there are three types of cone cells, sensitive to
blue, green and red light, respectively.

Definitions
Colour blindness A general term referring to people with deficiency in the perception of colour. Colour
blindness is associated with non-functioning cone cells or insufficient numbers of one or more types of cone
cells. Red–green blindness is the most common.
Primary colours Three colours whose combinations give (almost) all other colours. These
are red, green and blue (R, G, B).
red
Colour addition Obtaining a colour by overlapping different amounts of three primary
colours.
Secondary colours The colours obtained when two primary colours are mixed.
yellow magenta
B + G = C, cyan (bluish green, i.e. turquoise), B + R = M, magenta (reddish purple),
R + G = Y, yellow. white

Complementary colours The combination of a primary and a secondary colour green blue
cyan
that gives white light.
Colour subtraction Refers to white light being transmitted through a coloured
filter. The three primary filters used are cyan, magenta and yellow filters. In other
words the three filters each remove their respective complementary colour.

Light and perception


Architects, designers, interior decorators, advertisers and others create effects based on the perception of
colour. For example:
• A room painted in bright red or yellowish colours gives a sense of a busy, hurried place. Another painted
in soft, pastel colours gives the impression of a relaxed, calm place.
• Soft reddish or orange colours create a ‘warm’ atmosphere whereas bluish and violet colours give the
impression of a cold, cool place.
• Small rooms can be made to ‘look’ bigger by painting them in light soft colours.
• A low ceiling can be ‘raised’ by painting it with a colour that is lighter than that used for the walls.
• A floor will look smaller if painted in dark colours rather than light colours.

Another effect is the inclusion of shadows. Deep shadows give the impression of a solid, massive object
whereas light shadows, or the absence of them, give the impression of a light and ‘airy’ structure.

Test yourself 4
Before you answer
Determine the colour obtained when yellow is mixed with blue.
Yellow is a secondary colour.
Test yourself 5
White light transmitted through a yellow filter. Use colour
Before you answer
subtraction to explain why the transmitted light is in fact yellow.
Filters subtract their complementary colour.

Test yourself 6
White light is transmitted through a magenta filter. The transmitted light is then passed through a yellow
filter. Determine the transmitted colour.

OPTION A: Sight and wave phenomena – SL


Options B, C, D – SL

Option B: Quantum physics and nuclear physics – SL


The content of this option is identical to Topic 13, page 72, to which the reader is referred.

Option C: Digital technology – SL


The content of this option is identical to Topic 14, page 79, and HL sections of Option F, pages 99–110, to
which the reader is referred.

Option D: Relativity and particle physics – SL


The content of this option is identical to sections in Options H and J, pages 123–135 and 145–156, to which
the reader is referred.

Physics for the IB Diploma


OPTION E: Astrophysics – SL and HL

Objects in the universe and stellar quantities – Core


Definitions
The solar system Our solar system consists of eight planets that revolve around a star called the Sun. The
order of the planets is (starting from the one closest to the Sun) Mercury, Venus, Earth, Mars, Jupiter, Saturn,
Uranus and Neptune (remembered as My Very Elegant Mother Just Served Us Noodles). All of these, except
the first two, have moons orbiting them. In between the orbits of Mars and Jupiter we find the asteroid belt,
a region of small rocky objects in orbit around the Sun. Pluto has recently been demoted from the status of a
planet and is now called a dwarf planet.
Planets vary in size in the order: Mercury (smallest), Mars, Venus, Earth, Neptune, Uranus, Saturn and Jupiter
(largest). A sometimes spectacular phenomenon in the solar system is the appearance of comets, small
objects no more than about 10 km across, in very large and very elliptical orbits. (Some comets do not orbit
the Sun and just appear through the solar system once.)
Distances in astronomy The average distance between the Earth and the Sun is called an astronomical
unit (AU) and 1 AU = 1.50 × 1011 m. The diameter of the solar system is about 80 AU. The distance travelled
by light in one year is called the light year; 1 ly = 9.46 × 1015 m. Another convenient unit is the parsec;
1 pc ≈ 3.09 × 1016 m.
Stars A star is in equilibrium under the action of the opposing pressures of gravity and radiation. A normal
star is a large mass of mostly hydrogen with a temperature in the core that is high enough for nuclear fusion
reactions to take place. The energy released produces an outward pressure on the outer layers of the star,
thus preventing gravity from collapsing the star.
Stellar clusters and constellations A stellar cluster is a large number of stars relatively close to each other
that affect each other through their gravitational forces. A constellation is a group of stars in a recognisable
pattern that are not necessarily close to each other in space. Stars and constellations appear to rotate around
the Earth in the course of the night because the Earth rotates around its axis. In the course of a year, as the
Earth rotates around the Sun, different parts of the night sky are visible from Earth and so different stars and
constellations are visible.
Galaxies Galaxies consist of very many stars (of the order 109) that attract each other gravitationally.
Galaxies can be spherical, elliptical or spiral in shape but also irregular. The average separation of stars in a
galaxy is of order a few pc and the average separation of galaxies is of order a few hundred kpc.

Radiation from stars – Core


Definitions
Luminosity The total power radiated by a star. It equals L = σAT4 where A is the !
star’s surface area and T its surface temperature in kelvin. The constant σ is the Stefan– A star with low luminosity may appear
Boltzmann constant, σ = 5.67 × 10−8 W m−2 K−4. Luminosity is measured in watts. brighter than another star of higher
Apparent brightness The power received per unit area (of the receiver). It is luminosity because it is closer.
measured in watts per square metre. Comparison of apparent brightness shows which
star appears brighter from Earth. It equals b = L 2 where d is the distance to the star from Earth.
4πd
Apparent magnitude, m A measure of the apparent brightness of a star on a
logarithmic scale.
The higher the magnitude, the dimmer the star appears.
In fact m = −19 − 5 log b where b is in W m−2. The naked eye can !This formula is not on the syllabus but it is worth knowing
2
see stars up to m = +6. since it makes the connection between b and m clear.
Absolute magnitude, M This is the apparent magnitude a star
would have if observed from a distance of 10 pc.

OPTION E: Astrophysics – SL and HL


88

Calculations with m and M: Cepheid stars – Core 1


If two stars differ by Δm units in apparent magnitude, they have a ratio of apparent brightness This is very important
of (2.512)Δm. So if they differ by 5 units they have a ratio of apparent brightness equal to (2.512)5 = 100. for exam questions.

Thus, the star Achernar with apparent magnitude 0.50 (appears bright) and the star Ceti with apparent
b
magnitude 3.50 (appears dimmer) have a ratio of apparent brightness A = (2.512)3 ≈ 16. In other words,
bC
Achernar appears 16 times brighter.

Definitions
The magnitude distance relation Absolute magnitude, apparent magnitude and distance are related
m−M
d
through the equation m − M = 5 log or d = 10 × 10 5 where d is necessarily in pc.
10
Cepheid stars An important class of stars, which have variable luminosity with a definite period.
Cepheids as ‘standard candles’
The distance to a Cepheid up to 15 Mpc can be determined by the following methods.
The surface of the star expands (luminosity increases) and contracts (luminosity decreases). The period of
variation of luminosity T (in days) is related to the average absolute magnitude of the star M through
M = −2.81 × log T − 1.43.
Brightness variation of δ-Cephei
3.5 magnitude 3.6 to 4.3

Apparent magnitude
Thus δ-Cephei with a period of 5.4 days has average absolute magnitude
M = −2.81 × log 5.4 − 1.4 = −3.49. From the graph, the average apparent 5.4 days
magnitude is about m = 4.0 and so using the magnitude distance relation we 4.0
find the distance to the star to be
d d period
m − M = 5 log ⇒ 4.0 − (−3.49) = 5 log 4.5
10 10
d 7.49 0 2 4 6 8 10 12
log = = 1.50 ⇒ d = 10 × 101.5 ≈ 320 pc Time / days
10 5

It is easy to measure a star’s apparent brightness (with the CCD of a digital camera) but not its luminosity.
A Cepheid is a star of known luminosity (i.e. a ‘standard candle’). If we can be sure that a particular Cepheid
star belongs to a particular galaxy then another star in the same galaxy has essentially the same distance.
If we then compare its apparent brightness to that of the Cepheid we will get information on the star’s
luminosity:
b
Lstar = star LCepheid
bCepheid

Test yourself 1
The Sun has an apparent magnitude of approximately −27. Estimate, in AU, Before you answer
the distance from which the Sun becomes invisible to the naked eye. How does apparent brightness depend on distance?

Test yourself 2 Before you answer


The star Achernar has absolute magnitude MA = −2.77 and Barnard’s star What is the ratio of apparent brightnesses
absolute magnitude MB = 13.22. What is the ratio of the luminosity of Achernar when the distance is the same?
to that of Barnard’s star?

Test yourself 3
Before you answer
A star has apparent magnitude 3.2 and absolute magnitude 4.8. Explain without
Does a higher number on the magnitude
a calculation whether the star is closer or further than 10 pc.
scale imply a brighter or a dimmer star?

Test yourself 4
Vega has apparent magnitude 0.03 and absolute magnitude 0.58. Calculate its distance from Earth.

Physics for the IB Diploma


89

Types of stars and stellar spectra – Core 4

Binary stars are two stars that orbit a common centre. The heavier star is in the inner
2
orbit. The stars have a common period of revolution which means they are always
diametrically opposite each other. The common period is determined by the separation of
3
the stars and the total mass of the stars. 1 3 1
to Earth
The period of revolution is T.
T 4
At t = 0 (and at t = 2 ) the stars are moving at right angles to the line of sight to Earth
and so there is no Doppler shift (positions 1 and 3).
2
T 3T
At t = 4 (and at t = 4 ) the stars are either approaching or moving away from Earth so
there is a Doppler shift (positions 2 and 4). 1

Definitions 2
Spectroscopic binaries If the light received from the binary stars is analysed through
3
a diffraction grating so we can see the individual wavelengths in the light, the binary star
is called a spectroscopic binary. Because the stars sometimes move towards the Earth and
4
sometimes away, the light received shows a Doppler shift.
Eclipsing binaries If the Earth happens to be on the same plane as the plane of the Increasing wavelength
orbits of the two stars, one star will, periodically, be hiding behind the other star, i.e. there
will be eclipses. This means that the light of the hidden star will be blocked and so Earth
will receive less light than usual. brighter dimmer
star star
The light curve of eclipsing binaries is a graph of apparent b hidden hidden
brightness (or apparent magnitude) versus time.

period
Time

Stellar spectra Can be used to tell the surface temperature and chemical composition of
a star.
Wien’s law The wavelength at which most of the energy is emitted is related to the
surface temperature through λ0T = 2.9 × 10−3 m K.
Chemical composition
This absorption spectrum shows the missing lines corresponding to hydrogen.
If this was from a star it may be deduced that the star contains hydrogen. A real
absorption spectrum of a star contains many more dark lines, i.e. missing lines,
which are wavelengths corresponding to photons that have been absorbed by
other elements in the outer layers of the star. Specific elements absorb specific
wavelengths and so the missing lines give us information about what elements 410 434 486 656 nm

exist in the star. I


1.0
The spectrum of the Sun 0.8
The peak wavelength corresponds to a yellowish-orange colour.
0.6

0.4
Test yourself 5
A star has a surface temperature of 3000 K. Calculate the wavelength at which 0.2
most of its energy is emitted and state the colour of the star. 0 λ / μm
0 0.2 0.4 0.6 0.8 1.0 1.2

OPTION E: Astrophysics – SL and HL


90

The Hertzsprung–Russell diagram – Core


Hertzsprung and Russell independently pioneered a plot of stars according 1
to luminosity (vertical axis) and surface temperature (horizontal axis). You can answer (almost)
Notice that temperature increases as we move to the left. everything in the
Astrophysics Option if you
In such a plot stars appear to be grouped in three major areas: the main
learn the HR diagram well!
sequence, the white dwarfs and the red giants and super red giants.

10 000 Betelgeuse

Achernar
Ceti
Cepheid
Vega
variables
100 Red giants

Sirius A Arcturus
Altair

Procyon A
Luminosity / Solar Units

1
α Centauri
Sun

Main sequence ε Eridani


Sirius B
0.01

White dwarfs Procyon B


0.0001
EG129

30 000 10 000 6000 3000


Surface temperature / K
O B A F G K M

Spectral class
The letters O, B, etc. on the horizontal axis of the HR diagram refer to the spectral class of the
star. This is simply another way of telling the surface temperature of the star. M denotes red stars,
O white and B bluish. Our Sun is a class G star and is yellow.

Test yourself 6
Using the HR diagram, calculate the ratio of a the radius of Achernar to that of EG 129 and
b the radius of Ceti to that of Achernar. Comment on the results.

Physics for the IB Diploma


91

Distances in astronomy – Core


It is a major problem to determine distances in astronomy. We have available the Cepheid method (see
page 88) and the parallax and spectroscopic parallax methods.

The parallax method


For nearby stars (at a distance less than 300 pc), the Earth in January
parallax method can be used. For larger distances,
the parallax angle is too small to be measured.
1 AU p star
The method consists of observing a star at two
times, six months apart. In the six months, the Earth Sun
has moved in its orbit around the Sun and so the
star will be observed to have shifted relative to
the background of the very distant stars. If the Earth in July
parallax angle (shown in the diagram) is measured
to be p arc seconds, the distance to the star in parsec !
(pc) is d = 1 AU ≈ 1 AU since the angle is very small. One parsec is the distance at
tan p p
We define a new unit of distance, the parsec (pc) which the parallax of a star is
to be the distance at which the parallax angle is 1”. one arc second.
Then if the parallax angle, expressed in arc seconds
is p, the distance in pc is given by d = 1 .
p
To find the pc in metres,
1 pc = 1 AU = 1.49 × 10 = 3.1 × 1016 m
11

tan 1″
tan 1
3600

The spectroscopic parallax method


Despite the name, no parallax is involved in this method. It can be used for larger distances than the parallax
method, up to a few kpc.
Summary of method:
• Measure apparent brightness
• Measure temperature from spectrum
• Determine star type from absorption spectrum
• Find luminosity from HR diagram
L
• Use d =
4πb

In this method, the distance to a star is calculated by measuring the apparent brightness b and luminosity L
L
and then using: b = L 2 ⇒ d = . The difficulty is in measuring the luminosity. To do that we must
4πd 4πb
examine the spectrum of the star, get the wavelength at which most of the energy is emitted and then use
Wien’s law to get the star’s surface temperature. We then refer to an HR diagram. Knowing the temperature
is not enough to determine luminosity from the HR diagram. However, if we know the star’s type we may
then use the HR diagram to estimate luminosity. The star’s type is determined by studying its absorption
spectrum. Stars in the same area of the HR diagram have similar absorption spectra.

Test yourself 7
A main sequence star has temperature 10 000 K and apparent brightness 4.4 × 10−10 W m−2. Before you answer
Determine its distance from Earth. (Solar luminosity Ls = 3.9 × 1026 W.) Use the HR diagram.

OPTION E: Astrophysics – SL and HL


92

Worked examples of calculations in astrophysics: hints and common


mistakes – Core
1 The distance to the star Wolf-359 is 4.93 × 105 AU and its apparent brightness is 1.97 × 10−12 W m−2.
Calculate the luminosity of this star.
© IB Organization 2008

This requires direct substitution in the formula b = L 1


4πd2 This means that we must express all
and solving for luminosity we get L = 4πd b. 2

quantities in this formula in SI units.


We get L = 4π × (1.97 × 10−12) × (4.93 × 105 × 1.50 × 1011)2 = 1.35 × 1023 W.

2 Star A is at a distance of 100 pc from Earth. Its luminosity is 4 times greater than that of star B and its
apparent brightness is 100 times greater than that of star B. Deduce that the distance of star B from
Earth is 500 pc.
© IB Organization 2007
LA
We apply b = L 2 to star A and star B to get bA = , 1
4πd 4πdA2
LB This is a comparison problem.
bB = and now divide the equations side by side to get
4πdB2 Units do not have to be changed.
LA
bA 4πdA2 LA dB2 dB2 dB2 dB 1
= = 2 , i.e. 100 = 4 2 ⇒ = 25 ⇒ = 5 ⇒ dB = 5 × 100 = 500 pc
bB LB LB d A
dA
dA2 dA The original distance was in pc so the
4πdB2 new distance will be in pc as well.
3 The table gives information on the Sun and the star Sirius A.

Star Apparent brightness Luminosity (relative units)


Sun 1.4 × 10 W m3 −2
1.0
Sirius A 1.1 × 10 W m −7 −2
23

Deduce that the distance of Sirius from Earth is 5.4 × 105 AU.
© IB Organization 2007

The problem is again a comparison problem and completely identical to the previous one – supply the
details. (Remember that the distance between the Earth and the Sun is 1 AU.)
1
L L
It would be wrong to find the distance through b = ⇒ d = 4πb and substituting L = 23. This gives
4πd2
23
d= = 4.1 × 103 and is wrong for the simple reason that the luminosity is not just 23 but 23
4π × 1.1 × 10−7
times that of the Sun; but the luminosity of the Sun is not given. The distance obtained has unspecified
units and hence is meaningless.

4 A binary star system consists of two stars Antares A and Antares B. The temperature of A is 3000 K and
that of B is 15 000 K. The luminosity of A is 40 times that of B. Calculate the ratio of the radius of A to
that of B.
© IB Organization 2002

This is again a ratio problem. Write LA = σAA(3000)4 and LB = σAB(15 000)4. Take ratios side by side to
LA σ AA (3000)4 AA ⎛ 1 ⎞4 A
get = 4 ⇒ 40 = A ⎝ ⎠ ⇒ A = 25 000. Since area is related to radius through A = 4πR2 it
LB σ AB (15 000) B 5 AB
RA
follows that = 25 000 ≈ 160.
RB 1
You must learn this method involving dividing equations side by side.

Physics for the IB Diploma


93

Cosmology – Core
In the 19th century it was believed that the universe was infinite in extent, without a beginning, static and
containing an infinite number of stars more or less uniformly distributed in space. This was the Newtonian
model of the universe.

Olbers’ paradox
This picture was challenged by a simple observation made by Olbers (and many others before him) who
asked why the night sky was dark.
The idea is that stars far away appear very dim individually but there are
also very many of them. The result is that the distant stars contribute as
much light as the near stars.
The outer shell is further away so the apparent brightness of each of the
stars it contains is lower than that of a star in the inner shell.
Earth
But the outer shell has more stars than the inner shell.
thin shells
The two effects compensate each other exactly so that both shells contribute
the same apparent brightness on Earth.

Details
Olbers provided a simple argument leading to the conclusion that the night sky should
not be dark. ! The volume of the shell
Olbers considered a thin shell of radius d and thickness δr around the Earth. The number V=
4π 3
r
of stars in the shell is therefore the average number of stars per unit volume, n (the star 3
dV
number density), multiplied by the volume of the shell, 4πd2δr (area of shell × thickness). = 4πr2
dr
number of stars in shell = n × 4πd2δr dV = 4πr2dr

If the average luminosity of the stars is L, then the total luminosity of the stars in the shell is
Ltotal = L × number of stars in shell
= L × n × 4πd2δr
So the apparent brightness received on Earth from all the stars in the shell is
δr
b = total2 = L × n × 4πd
L 2
2 = nδrL
4πd 4πd

In other words, even if the shell is very far away, it contains so many stars that each shell contributes a
constant amount of apparent brightness on Earth. If the universe is infinite, it contains an infinite number
of such shells and so the apparent brightness on Earth should theoretically be infinite. (Of course, some stars
block others and this reduces the amount from infinite to very large.)
The sky at night should be ablaze with light and should not be dark!
Resolution
• The universe does not contain an infinite number of stars.
• The stars do not live forever.
• The universe has a finite age and so some stars are so far away their light has not yet reached us.

Expanding universe
There is a lot of hydrogen in the universe so we expect that a lot of the light we receive has been emitted by
hydrogen. We know the wavelengths at which hydrogen emits from experiments in the lab.
Light from distant galaxies is received on Earth at a wavelength that is longer than that emitted, i.e. it is
red-shifted. This is evidence that the galaxies are moving away from us.

OPTION E: Astrophysics – SL and HL


94

The Big Bang – Core


The expansion of the universe suggests that in the past the universe was smaller and had a beginning. The
Big Bang marks the beginning of time. It took place at a point, which was all that the universe was then. So
the Big Bang happened everywhere in the universe.

Does the universe expand into anything?


The universe is all that there is and so there is nothing the
universe can expand into. ! It is a common mistake to think of
the universe as a cloud of smoke that
General relativity says that space is created in between
expands in a room, taking up more and
galaxies (the space expands) giving the illusion of galaxies
more of the space of the room.
moving away. It is impossible to visualise expanding
space in three dimensions, so we usually make a two-
dimensional analogy with the two-dimensional surface of
an expanding balloon.
! The expansion of the universe does not
imply that the Earth is at the centre of
the universe. An observer anywhere
in the universe would reach the same
(erroneous) conclusion about his or
her position.

When the balloon in the diagram expands, the distance


between the two dots increases. An observer on one dot
would say that the other has moved away.

CMB (cosmic microwave background) radiation


CMB radiation is black body radiation in the microwave region coming from all directions. It is the
remnant of the radiation that filled the universe in its early stages when the temperature was very high.
As the universe expanded, the temperature fell and so the peak wavelength of this radiation shifted to
microwave wavelengths.
The present peak wavelength is about 1.07 mm, indicating a temperature of the universe of just below 3 K.
λ0T = 2.9 × 10−3 m K
2.9 × 10−3
T= mK
1.07 mm
Intensity

T = 2.7 K
peak
wavelength

Wavelength

The CMB was discovered in 1964 by A. Penzias and R. Wilson but had been predicted in 1948, on theoretical
grounds, by R. Alpher and R. Herman (in work that went, mainly, unappreciated and unacknowledged).

Test yourself 8
State and explain two pieces of experimental evidence in support of the Big Bang model of the universe.

Physics for the IB Diploma


95

The fate of the universe – Core


Standard theory predicts that there are only three possible outcomes in the evolution of the universe. It may:
• expand forever (an open universe)
• expand forever at a rate that becomes zero after an infinite time (a flat universe)
• expand and then collapse back to a point (a closed universe).
(But this is an outdated answer!)

Notice that the age of the universe depends on which


model one assumes.
open ρ < ρ c
These three possibilities are shown in the graph, coincident

Size
at the present time. flat ρ = ρ c

closed ρ > ρ c

now Time
Which model fits our universe?
The path the universe will actually follow depends on the comparison of the density ρ of the universe to a
critical density, ρc. If ρ < ρc the universe will expand forever, if ρ = ρc it will expand forever at a slowing rate,
stopping at infinity and if ρ > ρc the universe will collapse. The critical density is determined from theory:
ρc ≈ 10−26 kg m−3.

ρ = ρc
Recent measurements show that ρ = ρc. But, despite ρ = ρc the
universe is actually accelerating in its expansion rate. Dark energy
(a kind of vacuum energy making up as much as 70% of the
energy of the universe) has been invoked to explain this.
Size

flat ρ = ρ c

now Time

Dark matter
Determining the density of the universe is difficult because there
appears to be mass that is too cold to radiate light and so cannot
be seen. Its existence is determined from the gravitational effects
!
Do not confuse dark
this mass has on other masses. Candidates for dark matter include matter with dark energy.
neutrinos, black and brown dwarfs, possible exotic particles predicted
by theories of particle physics (WIMPS), matter around galactic
halos (MACHOS) and others. With 70% of the mass-energy of the universe composed of dark energy, the
remaining 30% is formed by dark matter and ordinary matter. Of this 30%, only 5% is accounted for by
ordinary matter. In other words, ordinary matter is only about 17% of the total matter in the universe.

Test yourself 9
State the significance of the critical density of the universe.

OPTION E: Astrophysics – SL and HL


96

Stellar evolution – HL
Stars will spend most of their lifetime on the main sequence. There, they fuse hydrogen into helium.
Once about 12% of the hydrogen is used up, the star will develop instabilities and will start to expand.
As it expands, the surface temperature of the star decreases. The decrease in temperature would normally
result in a reduction in luminosity but the increase in surface area more than compensates and so the
luminosity actually increases. The star will become a red giant or red supergiant star.

What happens next depends on the mass of the star. In a low-mass star, no further nuclear reactions take
place and the core remains composed of helium. In higher-mass stars, nuclear reactions continue in the
core but now involving heavier elements. The more massive the star, the heavier the elements produced in
nuclear reactions. The process stops at the production of iron/nickel. No heavier elements can be produced
by nuclear fusion. (Recall the binding energy curve, page 40.)

hydrogen

helium

heaviest
elements

Low-mass star High-mass star

The star will then undergo a catastrophic explosion. The explosion will be a planetary nebula if the mass of
the star is low and a supernova if it is high.
Both explosions leave behind the core of the star.
What happens to the core is discussed next.

The Chandrasekhar limit (the largest mass a white dwarf can have)
If the core left after the planetary nebula stage has a mass such that M < 1.4Ms it will become a stable white
dwarf star. It does not collapse further because of a pressure created by electrons.
The largest mass a white dwarf can have is about 1.4 solar masses and this is known as the Chandrasekhar limit.

The Oppenheimer–Volkoff limit (the largest mass a neutron star can have)
This is close to three solar masses.
A star with a core mass after the supernova stage of
1.4Ms < M < 3Ms does not collapse further because of a pressure ! A very massive star can still end up as a white dwarf if the
created by neutrons. It becomes a stable neutron star.
mass of the core is less than the Chandrasekhar limit.
These are very small and dense stars composed of neutrons.

Pulsars
If the neutron star rotates around its axis it is called a pulsar. Because of its very strong magnetic field,
it emits radio waves along the direction of the magnetic field. This radiation may be detected with radio
telescopes. The radiation arrives at the observer once in every star revolution if the direction of the magnetic
field is different from that of the rotation axis.

Black holes
If the mass of the core is larger than the Oppenheimer limit then no known mechanism exists to stop the
further collapse of the star – it becomes a black hole – a star from which nothing can escape.
Physics for the IB Diploma
97

Evolutionary paths and the mass–luminosity relation – HL


The diagrams show the paths followed by stars as they leave the main sequence to become a red giants
or b supergiants.

red supergiant
supernova

red giant
Luminosity

Luminosity

a Temperature b Temperature

The mass–luminosity relation


Main sequence stars show a relationship between their luminosity and their mass: L = kMn where the
exponent n is between 3 and 4. We will take n = 3.5 (k is a constant).

! It is important to recognise that it is only


main sequence stars that obey this relation.

The total time that will be spent by the Sun on the main sequence (its lifetime) will be about 9 × 109 y.
Stars leave the main sequence after using about 12% of their hydrogen. We can use this to estimate the time
they spend on the main sequence.
L = kM3.5 = E
T
where E is the energy produced and T is the lifetime on the main sequence. But E = 0.12Mc2
0.12Mc2 0.12c2 −2.5
and so kM3.5 = ⇒T= M .
T k
Thus, a star with a mass 100 times greater than the mass of the Sun will spend much less time on the main
sequence:
0.12c2 –2.5
Tstar M star M 2.5 ⎛ ⎞2.5 1
= k 2 = S =⎝ 1 ⎠ =
TS 0.12c –2.5 M 2.5 100 100 000
MS star
k
and so Tstar = 1 × 9 × 109 = 9 × 104 y.
100 000
Test yourself 10
A star has a mass that is 50 times larger than the mass of the Sun and a luminosity that is 80 000 times the
luminosity of the Sun. Could this star be a main sequence star?

OPTION E: Astrophysics – SL and HL


98

Hubble’s law – HL
Distant galaxies move away from each other with a speed that is
proportional to their separation: v = Hd.
The presently accepted value of the Hubble constant is
H = 72 km s−1 Mpc−1. (The value is uncertain because of the

Speed
difficulty in measuring speeds and, especially, distances.)
The speed of the receding galaxies is measured using the
Doppler formula Δλ = vc .
λ0

0 Distance
! Hubble’s law only applies to distant galaxies.
Andromeda, for example, is actually approaching
! The slope of this graph is the
our Milky Way because of the mutual gravitational Hubble constant. The graph
attraction between the two galaxies. passes through the origin.

Estimating the age of the universe – Hubble time


The diagram shows points that were very close to each t=0
other at the time of the Big Bang. Now, they are separated
v = Hd
by a distance d and one moves with speed v = Hd relative
to the other.
t=T
Assuming a constant rate of expansion given by the
d
present value of the Hubble constant we have that
d d 1
v = , but v = Hd and so = Hd, implying that T = .
T T H
(Not assuming a constant rate of expansion does not significantly change the result. Note that since the age
of the universe increases, the Hubble ‘constant’ is not really a constant.)

Formation of structures in the universe


The very early universe existed at an enormous temperature, 1032 K at 10−43 s after the Big Bang. This meant
that the kinetic energy of individual particles (e.g. quarks, electrons) was so high that these particles could
not bind into nucleons, nuclei and atoms.
Only after the temperature dropped sufficiently (due to the universe expanding) was the formation of these
structures possible.
• Nuclei formed 3 min after the Big Bang.
• Atoms formed 105 years after the Big Bang.
• Stars and galaxies formed 106 years after the Big Bang.

Test yourself 11
A line in the spectrum of hydrogen is measured to have a wavelength of 656.3 nm in the lab. The same line
observed in the spectrum of a distant galaxy has a wavelength of 689.1 nm. Calculate the distance to the
galaxy using H = 72 km s−1 Mpc−1.

Test yourself 12
a Estimate the age of the universe using a Hubble constant H = 72 km s−1 Mpc−1. b Explain why this is actually
an overestimate of the age of the universe.

Physics for the IB Diploma


OPTION F: Communications – SL and HL

Signals, carriers and modulation – Core


Definitions
Modulation The modifying of a signal so that it can be used to transmit information.
Information signal wave Can be either audio, i.e. sounds or a voice, or video, i.e. a picture or a movie or
data.
Carrier wave The means by which the information is to be transmitted – this is usually an electromagnetic
wave, e.g. a radio wave or visible light, or alternating current.
Bandwidth The range of frequencies a communication channel can transmit.

AM (amplitude modulation) – Core


In AM modulation the amplitude of the carrier wave gets modulated (i.e. modified) by the addition of the
information signal wave to the carrier’s amplitude. This is shown in the three graphs below right.

For a carrier of frequency fC and an information Carrier wave


signal of frequency fS the modulated wave’s V / mV
spectrum contains three frequencies as shown in 1.0
the AM power spectrum below.
0.5

0 t / ms
0.2 0.4 0.6 0.8 1.0 1.2 1.4
Amplitude

−0.5

−1.0

f Information signal
fC − fS fC fC + fS V / mV
0.75
0.50
The frequencies fC − fS and fC + fS are known as the
lower and upper sideband frequencies. 0.25
0 t / ms
The difference between the upper and lower 0.2 0.4 0.6 0.8 1.0 1.2 1.4
−0.25
sideband frequencies is the bandwidth:
−0.50
Δf = (fC + fS) − (fC − fS) −0.75
= 2fS
AM wave
Test yourself 1 V / mV
The AM wave graph below shows a carrier wave 1.5
modulated by a single audio frequency. Using the 1.0
graph, determine a the frequency of the carrier, b the 0.5
frequency of the information signal, c the bandwidth 0 t / ms
and d the amplitude of the information signal. 0.2 0.4 0.6 0.8 1 1.2 1.4
−0.5
V / mV −1.0
2.0 −1.5

1.0

0 t / ms
0.1 0.2 0.3 0.4

–1.0

–2.0

OPTION F: Communications – SL and HL


100

FM (frequency modulation) – Core


In frequency modulation (FM) the carrier wave’s frequency is changed (modulated) according to the
instantaneous displacement of the information signal. The graphs below show the variation with time of an
information signal wave, carrier wave and the resulting FM wave.

Information The frequency of the modulated signal is greatest when


the information signal has its greatest positive value and ! Notice that in the FM
Voltage

the frequency is least when the information signal has its


modulated signal the
most negative value.
frequency changes but
Time In FM modulation we have a parameter k, called the the amplitude stays
frequency deviation constant, that determines by how constant.
much the modulated wave’s frequency deviates from the
carrier’s frequency. The unit of k is Hz V−1. The frequency of the modulated
Carrier wave varies from a minimum of fC − kAS to a maximum of fC + kAS. AS is the
information signal wave amplitude.
Voltage

A related quantity in FM modulation is the modulation index


Δf
defined by β = . Here, Δf is the maximum deviation of the
Time f
modulated carrier’s frequency relative to the unmodulated carrier
frequency and f is the (highest) frequency in the information
signal.
FM
The importance of this index is that it is related to bandwidth.
The FM bandwidth is given (approximately) by the equation:
Voltage

FM bandwidth ≈ 2(Δf + f)
In radio FM broadcasts, Δf = 75 kHz and the modulation
Time
index β used is typically 5.

Comparing AM and FM modulation


• FM has a better signal-to-noise ratio. This is because noise adds to the amplitude of the carrier wave and so is
included in the received signal. Notice that when amplifying an AM signal the noise gets amplified as well.
• The same information can be transmitted with less power with FM compared to AM.
• The bandwidth for FM is greater than that for AM.
• In FM, the amplitude of the carrier is small compared to the amplitude of the sidebands. This means that most
of the power in transmission goes to the sidebands, which is where the information is.
• The modulators and demodulators for FM are more complex compared with those for AM and so more
expensive.
• AM transmissions travel further because the signal is reflected off the ionosphere whereas FM transmissions
travel along straight lines.

Test yourself 2
A carrier of amplitude 12 V and frequency 600 kHz is FM modulated by an information signal wave Before you answer
of amplitude 2.0 V and frequency 8.0 kHz. The frequency deviation constant is k = 20 kHz V−1. Read the main features of
Determine a the amplitude of the FM modulated signal, b the highest and lowest frequencies FM modulation again.
in the FM modulated wave and c the modulation index β.

Test yourself 3
A high quality FM radio station has a frequency deviation of 75 kHz and contains audio signals varying from 50 Hz
to 15 kHz. What is the modulation index and the bandwidth of the FM transmissions?

Physics for the IB Diploma


101

AM radio receiver – Core aerial

The components of the AM radio receiver are loudspeaker


represented in the block diagram on the right and
tuning RF demodulator AF
described in the table. circuit amplifier amplifier

Aerial The antenna is needed in order to pick up the carrier signal that has been
emitted by the transmitter.
Tuning circuit It isolates the frequency of the particular carrier wave one wants to tune to.
Radio Frequency The voltages sent by the tuning circuit to the demodulator are generally
amplifier extremely small. They have to be increased so that the demodulator can work.
Demodulator It extracts the information carried by the carrier and the carrier is then rejected.
Audio Frequency The signal sent by the demodulator is weak and needs to be amplified before
amplifier sending it to the loudspeaker, otherwise the loudspeaker cannot be driven.
Loudspeaker The audio frequency signal is still electrical in nature. This signal will then drive
the diaphragm of the loudspeaker so that the sound content of the information
signal can be recovered.

Binary numbers – Core


Binary numbers are numbers expressed in base 2 and consist of 0s and 1s.
Since 5 = 1 × 22 + 0 × 21 + 1 × 20 we express the decimal number 5 in binary form as 52 = 101. The coefficients
we use are 0 or 1. Similarly the number 12 is 12 = 1 × 23 + 1 × 22 + 0 × 21 + 0 × 20 ⇒ 122 = 1100.
Given a number in binary form, we call the first digit (starting from the left) the most significant bit (MSB)
(because it has the biggest effect on the value of the number) and the digit the number ends with the
least significant bit (LSB). For example, 1 111 0 .
MSB LSB
Signal input

Signal output
Definitions distorted signal amplified signal
Analogue signal A signal that varies continuously between two
extreme values.
Time Time
Digital signal A signal that can only take the value 0 or 1.

A digital signal will be distorted during transmission due to noise


and attenuation (see page 105). The signal can easily be reshaped
! A Schmitt trigger device is needed as
using circuits involving Schmitt triggers. an amplifier will also amplify the noise
carried along with the signal.
The advantages of digital communication
• Digital signals can be regenerated perfectly, i.e. noise and distortion can be eliminated.
• Digital circuits are relatively inexpensive, reliable and readily available.
• Error correcting codes ensure that errors in the transmission of the signals are eliminated.
• The signals can be encrypted, by scrambling the bits in the signal, so that they can only be read at the
desired destinations, providing privacy and security.
• The signals can be stored, processed, compressed and controlled by computers.
• Digital signals can be stored on devices such as CDs and DVDs that are readily available.
• Time division multiplexing (see later) can be used with digital signals.

Test yourself 4
Express the 5-bit binary number 10101 as a decimal and the decimal number 25 as a 5-bit binary number.

Test yourself 5
How many numbers can be represented with 5-bit words?
OPTION F: Communications – SL and HL
102

Digital transmission – Core


V /V
ADC (analogue to digital conversion) 8
An analogue signal is sampled, i.e. the
voltage is measured every 0.50 ms, and analogue signal
6
the values are recorded in the graph to the
right. The sampling frequency is
1 4
= 2.0 kHz.
0.50 ms
We will convert the measured voltages into 2
3-bit binary words.
With three bits we can have at most 23 = 8 0 t / ms
0 1 2 3
quantisation levels. So we divide the range
of the voltages (0 to 8 V) into eight intervals. Range Sampling time / ms Signal / V PAM signal / V Binary code
[0,1) → 0 0 0 0 000
A measured value within a given interval is
assigned the value of the lower boundary [1,2) → 1 0.5 1 1 001
of the interval. For example at 2 ms the [2,3) → 2 1.0 2 2 010
measured voltage is 4 V. This belongs to [3,4) → 3 1.5 3 3 011
the interval [4, 5) and so is assigned the [4,5) → 4 2.0 4 4 100
value 4 V. The decimal number 4 is now [5,6) → 5 2.5 5 5 101
converted to the 3-bit binary number 100.
[6,7) → 6 3.0 6 6 110
This gives the values in the table.
[7,8) → 7 3.5 7 7 111

Reconstructing the signal


A low sampling frequency (compared to the The sampling frequency must be at least twice as
information signal frequency) results in aliasing, i.e. large as the largest frequency in the information
unfaithful reconstructions of the signal. signal. This is known as the Nyquist frequency.

Block diagram for digital transmissions

signal in sample- parallel- serial- signal out


ADC DAC
and-hold to-serial to-parallel

sampling
clock clock
frequency

Definitions
Sample-and-hold The signal is sampled according to the sampling frequency used and stored.
ADC Every sample of the signal is converted into an n-bit binary code in the ADC (as an example take n
to be 8). The output of the ADC is a set of 8 bits making up one sampled signal.
Parallel-to-serial The 8 bits are sent simultaneously in the device called the parallel-to-serial converter.
Each bit is then transmitted one by one from this device along a single conducting line.
Serial-to-parallel At the other end, the bits, arriving one by one, are registered in the device called the
serial-to-parallel converter. Once all the bits have arrived, they are put together to make one 8-bit word. The
8 bits are then simultaneously fed into the DAC.
DAC In the digital-to-analogue converter, the (digital) signal is now turned into an analogue signal.
Clocks The purpose of the devices labelled ‘clocks’ is to control the process of transmitting the bits in the
parallel-to-serial and the serial-to-parallel converters. The bits must be sent before the next batch of bits arrives.

Physics for the IB Diploma


103

Bit rate
The bit rate is the number of bits that can be transmitted per second. If each bit has a duration of τ seconds
then the bit rate is given by B = 1 . Equivalently, if the number of bits per sample is n and the signal is
τ
sampled f times a second we also have B = f × n.

The bandwidth for the transmission of a digital signal is equal to the bit rate.

A small bandwidth will distort the pulses to such an extent that reconstructing the analogue signal from its
digital form may be impossible.

Test yourself 6
The first graph shows the variation with time of the voltage of an analogue signal.

V /V
2.0

1.5

1.0

0.5

0 t / ms
0 1 2 3 4

The signal is converted into a digital signal and, after transmission, it is converted into an analogue signal
again. The second graph shows the variation with time of the voltage of the transmitted signal.

V /V
2.0

1.5

1.0

0.5

0 t / ms
0 1 2 3 4

Use the graphs to determine a the sampling frequency, b the minimum number of bits in a sample and c the
minimum bit rate for this transmission. d State and explain values of an appropriate sampling frequency and
number of bits in each sample that would allow a better reconstruction of the original signal.

Test yourself 7
A telephone call is sampled 8000 times a second and each sample contains 8 bits. Calculate the duration of a
bit and the total number of bits generated in a 12-minute phone call.

Test yourself 8
A transmission line carries signals of frequency ranging from 50 Hz to 3.0 kHz. What is the highest bit rate in
this transmission line?

OPTION F: Communications – SL and HL


104

Time division multiplexing (TDM) – Core


Time division multiplexing is a way to transmit many digital signals along
the same channel at the same time.
‘dead’ time that goes wasted,
Consider a signal (solid line) in which the sample has a duration of 8 μs 117 μs
(typical in telephone communications). The sampling frequency is 8 kHz and
so the time in between samples is 1 = 125 μs. There is, therefore, a wasted
80 × 103
time of 125 − 8 = 117 μs. This could be used (theoretically) to send an additional
117 ≈ 14 samples in between (here only one is shown in dotted line).
8 125 μs 8 μs

Total internal reflection – Core


normal

refracted ray

θc θ > θc
θ < θc

incident ray reflected ray

When a ray of light enters a medium of low refractive index from a medium of high refractive index, the
refracted ray bends away from the normal.
As the angle of incidence is increased, the angle of refraction will eventually become 90°. The angle of
incidence in this case is called the critical angle θc.
For an angle of incidence greater than the critical angle, no refraction takes place. The ray simply reflects
back into the medium from which it came. This is called total internal reflection.
n n
The critical angle can be found from Snell’s law: n1 sin θc = n2 sin 90°, sin θc = n2 , θc = arcsin n2
1 1

Optical fibres – Core


glass core
Optical fibres consist of a thin glass core surrounded by a material of slightly
lower refractive index called the cladding.
cladding

Such a thin fibre can easily be bent and a ray of light can be sent down the
length of the fibre core. For most angles of incidence, total internal reflection
occurs so that the light ray stays within the core and never enters the cladding.

Test yourself 9
A ray of light in water (refractive index 1.33) is incident on a water–air boundary. Calculate the critical angle
of the water–air boundary.

Dispersion, attenuation and noise – Core


Definitions
Dispersion Different rays will, in general, arrive at the end of the fibre at different times.
! Dispersion limits the bit rate
This may cause bits of information to arrive at the end in the wrong order. and the maximum frequency
that can be transmitted.
Attenuation The loss of power when a signal travels through a medium.
Noise Power due to unwanted signals that travel along a given medium along with the signal of interest.
There is noise in a communications channel even when there is no signal.

Physics for the IB Diploma


105

Dispersion
There are two kinds of dispersion:
1 Material dispersion Different wavelengths will travel through the glass core of an ! Material dispersion may
optical fibre at different speeds because the speed of the wave depends on wavelength. be limited by using single-
Therefore, a set of light rays of different wavelengths will reach the end of a fibre at frequency light.
different times even if they follow the same path.
2 Modal dispersion Rays of light entering an optical fibre will in general follow
different paths. Rays that undergo very many internal reflections over a given distance
! Modal dispersion may be
are said to follow high-order mode paths while those suffering fewer reflections limited by using very thin
follow low-order mode paths. fibres, called monomode fibres.

Power output
Power input
high-order
mode ray

low-order
mode ray
Time Time

In the diagram on the right the area under the pulse is the energy carried by the pulse. In the output pulse
the area is somewhat less because some energy has been lost along the transmission. Since the width
increases as a result of dispersion, the associated carrier wave period increases as well and this implies that
the maximum frequency that can be transmitted decreases.

Definitions
Attenuation in optical fibres Mainly due to impurities in the glass core.
P
Power loss Power loss in decibels (dB) = 10 log final . !
Pinitial
In optical fibres, the specific attenuation depends on
Specific attenuation Power loss in decibels per unit length travelled, the wavelength of the wave. It is minimum for infrared
P wavelengths and this is why these are used in optical
10 log final
Pinitial fibre transmissions.
i.e. . It is measured in decibels per kilometre.
L
Psignal
Signal-to-noise ratio (SNR) SNR = 10 log , where Psignal and Pnoise are,
Pnoise ! Amplifiers amplify the signal as well as the
respectively, the power of the signal and the noise.
noise and so the SNR remains unchanged.
Noise in optical fibres
The main source of noise in an optical fibre is the dark current in the photodiode – the small current that
exists even when the photodiode is dark. This current is due to radiation other than the light it is intended to
record falling on the photodiode and the workings of the semiconductor junctions in the photodiode.

Test yourself 10 Test yourself 13


A signal of initial power 8.0 mW suffers a power loss of 16 dB. A signal travels along a monomode fibre of
What is the output signal power? attenuation per unit length 4.0 dB km−1. The signal
enters a number of equally spaced amplifiers, each
Test yourself 11 providing a gain of 20 dB. How many amplifiers
A signal of power 180 mW is input to a cable of specific attenuation 3.0 dB km−1. must be used so that after travelling a total
Calculate the power of the signal after it has travelled 12 km in the cable. distance of 400 km the signal emerges from the
last amplifier with no power loss?
Test yourself 12
An amplifier has a gain of 6.8 dB. The signal that is input to the amplifier has
power 0.25 mW. Calculate the power of the output signal.

OPTION F: Communications – SL and HL


106

Channels of communication – Core


These are all media that can be used to transmit information.

Copper wires and wire pairs Used only for simple links nowadays, for example connections for a loudspeaker.
Advantages: cheap, easy to handle and install wire pairs have reduced cross talk.
Disadvantages: susceptible to interference from other nearby wires (cross talk), low bandwidth,
needs frequent amplification, signal distortion due to dispersion.
Coaxial cables Carry cable TV signals and telephone communications.
Advantages: high bandwidth, reduced attenuation and crosstalk effects.
Disadvantages: the average distance between amplification varies a lot with frequency. There is
still noise.
Optical fibres Used for high-quality telephone communication, secure transfer of digital data.
Advantages: very high bandwidth, low attenuation, very secure.
Disadvantage: complex electronics.
Satellites Used for transmitting telephone communications, TV signals, navigation signals, espionage,
surveillance and weather prediction.
Advantages: very high volumes of data can be transmitted.
Disadvantages: costs are enormous.
Radio waves Electromagnetic waves covering a vast range of wavelengths. Used in a variety of communications
depending on the frequency. Three types of radio waves are given below in the table.
Frequency Surface waves Mainly used for AM radio transmissions. Can travel large distances, well beyond the horizon of
below about the transmitter, due to diffraction.
3 MHz
Advantage: very large range.
Disadvantage: attenuation and distortion significant.
Frequency Sky waves Mainly used for amateur radio operators, international radio broadcasts and ship
range 3 MHz communications. The waves are directed upwards towards the atmosphere where they suffer (a
to 30 MHz
complicated) total internal reflection from a layer of the atmosphere called the ionosphere.
Advantage: large range.
Disadvantages: substantial attenuation in the ionosphere. Unreliable due to unpredictable
ionosphere conditions and interference.
Frequency Space waves This is the method used for radio FM transmissions as well as Earth-bound and satellite
above 30 MHz TV transmissions.
The waves travel along straight lines. The range is then dictated by the height of the transmitting
station and is typically a few tens of km for ground-based stations.
Advantages: the ionosphere has no effect on these transmissions so they are more reliable.
Can be used by satellites.
Disadvantage: small range (for ground-based stations).

Test yourself 14
The specific attenuation of a coaxial cable is 14 dB km−1. A signal is input to such a cable of initial power
200 mW. a Calculate the power of the signal after it has travelled a distance of 3.0 km along the cable. b State
whether a signal of similar power to that in a but of much higher frequency would suffer a larger or smaller
attenuation.

Test yourself 15
A microwave link station emits microwaves of power 28 MW uniformly in all directions. a Calculate the
power received by an antenna dish of area A = 1.2 m2 at a distance of 100 km. b Determine the attenuation of
the signal in dB.

Physics for the IB Diploma


107

Satellite communications – Core


Definitions
Uplink frequency The frequency used to transmit to the satellite.
Downlink frequency The frequency used by the satellite to transmit down to Earth.

The uplink and downlink frequencies are always different, with the uplink frequency being the higher of the
two (by convention).
The reason for the difference in frequencies is that the receiver on the satellite is designed to be able to pick
up very small signals and so is very sensitive. It operates at the uplink frequency. The transmitter, operating
at the downlink frequency, is powerful. If the frequencies were the same, a kind of resonance would occur in
which the arrival of a tiny signal creates a large, unwanted output signal.

Polar orbit satellites Geosynchronous satellites


low height (a few hundred km), north–south orbits large orbits – about 42 000 km from the centre of the
Earth above the equator
low height means they use less power for needs substantial power for transmissions
transmissions
used for communications, geological surveying and used mainly for communications
cartography, meteorology, oceanography, military
espionage, etc.
cheaper to put in orbit very expensive to put in orbit
serve polar regions just three satellites can cover the entire Earth’s
surface area (except the poles)
need tracking systems no tracking required
are above a particular point on the Earth’s surface are above the same point on the equator all the time
for only about 10 minutes

The operational amplifier (op-amp) – HL


The op-amp is a versatile device with two inputs and one output. + power supply
The output depends on the potential difference between the two
inverting
inputs, VOUT = G(V+ − V− ) where G is known as the (open loop) input

gain of the op-amp. output
non-inverting R
input
The maximum output is ±V where V is voltage of the power +
supply. (In practice it is a bit less.)

– power supply
An ideal op-amp has the properties:
1 The resistance R between the two inputs is infinite (in
practice it is very large). This means that the op-amp does
not take in any current.
2 The gain G is infinite (in practice it is very large.)

OPTION F: Communications – SL and HL


108

The inverting amplifier


In this inverting amplifier, the output voltage has an opposite sign to that of the input voltage.
The non-inverting input is connected to the 0 V line.
As long as the op-amp does not saturate, the difference in potential between the inverting and the non-
inverting inputs is very small and so the potential at the inverting input is also approximately zero.
The diagram assumes a positive potential at the inverting input. This implies that current flows as shown,
which means that the output potential V0 is negative, i.e. opposite to the input.

RF
R

V

Vin +
V0
0 volt line

The virtual Earth approximation assumes that point V has zero potential. This is because the op-amp has
a very high input resistance and a very high open loop gain.
V
Voltage across R is Vin − 0 so current in R is in .
R
−V
Voltage across RF is 0 − V0 so current in RF is 0 (recall, V0 is negative).
RF
These currents are equal since no current is taken in by the op-amp, and so
Vin V
= − 0.
R RF
V
The ratio G = 0 is known as the closed loop gain of the inverting amplifier and so
Vin
R
G = − F (closed loop inverting amplifier gain).
R

Test yourself 16
An inverting op-amp (see diagram) has a V/V
saturated output of ±9.0 V and RF = 80 kΩ and R = 3.0

16 kΩ. 2.5
a Determine the closed loop gain of the op-amp. 2.0
b Calculate the output voltage when Vin = −0.60 V. 1.5
c Calculate the input voltage for which positive
1.0
saturation is achieved and hence state the output
0.5
when Vin = −2.0 V.
d What is the current in the RF resistor when Vin 0 t / ms
0 0.1 0.2 0.3 0.4 0.5
= +1.2 V?
e The signal shown is input to the op-amp. Copy
this and draw the output signal on the same axes.

Physics for the IB Diploma


109

The non-inverting amplifier


In the non-inverting amplifier shown, notice the following
Y –
points:
As long as the op-amp does not saturate, the difference +
in potential between the inverting and the non-inverting RF
inputs is very small and so the potential at the non-
inverting input is approximately Vin. X V0
Vin
Since no current is drawn by the op-amp, the current in R R
is the same as the current in RF.
V0 0 V line (earth)
Current in RF:
RF + R
V
Current in R: in
R
V0 V
Therefore, = in
RF + R R
V R + R RF
Hence the closed loop gain is G = 0 = F = +1
Vin R R

Test yourself 17
A non-inverting op-amp (see diagram) has a saturated output of ±6.0 V and RF = 100 kΩ and R = 25 kΩ.
a Determine the closed loop gain of the op-amp. b Calculate the output voltage when Vin = −0.50 V.
c Calculate the input voltage for which positive saturation is achieved and hence state the output when
Vin = 3.0 V.

Reshaping digital pulses – the Schmitt trigger


In the transmission of a digital signal, dispersion, noise, attenuation and other factors may contribute to a
distortion of the digital signal.
The Schmitt trigger works as a standard comparator (it compares the input voltage to a reference value).
However, there are two separate reference values, one when the input is increasing (V2) and another when
it is decreasing (V1). To understand how the trigger works, consider the Schmitt trigger circuit (in which the
op-amp is used in the non-inverting mode).
Here the output is at −9.0 V because the potential at 2.0 V
– output
X is below 2.0 V. (This means that the input voltage –9.0 V
is sufficiently low.)
+
As the input voltage increases, so does the potential
VX at X.
Eventually, VX will become 2.0 V while the output is
Vin 10 kΩ X 50 kΩ
still −9.0 V.
In this case the potential difference across the 50 kΩ resistor is 2 − (−9) = 11 V. Hence the current is
11
= 0.22 mA. The op-amp takes negligible current and so this is also the current in the other resistor.
50 × 103
The potential difference across the 10 kΩ resistor is Vin − 2 = IR ⇒ Vin = 2 + 0.22 × 10−3 × 10 × 103 = 4.2 V.

In other words, as Vin increases, the output will suddenly switch to +9.0 V when Vin = 4.2 V. This is the upper
switching voltage of the trigger.

OPTION F: Communications – SL and HL


110

The lower switching voltage


We now have the output at +9.0 V. Then VX > 2.0 V. As Vin now begins to decrease, VX will decrease too and
eventually will become equal to 2.0 V while the output is still at +9.0 V. In this case, the potential
difference across the 50 kΩ resistor is 9.0 − 2.0 = 7.0 V. Hence the current is 7.0 3 = 0.14 mA. The op-amp
50 × 10
takes negligible current and so this is also the current in the other resistor. The potential difference across
the 10 kΩ resistor is 2 − Vin = IR ⇒ Vin = 2 − 0.14 × 10−3 × 10 × 103 = 0.60 V.

Output of the Schmitt trigger circuit


The red line on the graph shows the signal that is fed into the Schmitt trigger circuit. What will be the
output?
V/ V

5
corrupted signal
high
4

1
low

0 t / ms
0 1 2 3 4 5 6
• The high and low switching voltages are shown in dashed lines.
• Starting at t = 0, we see V increasing. The first switchover will be when we reach the high switching
voltage. V becomes binary 1.
• As V decreases we wait until we reach the lower switching voltage. V becomes binary 0.
• The regenerated signal is shown by the green line (binary 0 corresponds to output voltage −9.0 V and
binary 1 to +9.0 V).

The mobile phone system – HL


The main components of the mobile phone system are the mobile phones themselves, the base stations
and the cellular exchange.
A geographic area is divided into different cells with a base station in each cell. When a mobile phone is
turned on, it sends a radio signal that registers its presence to the nearest base station.

Base stations
Their main function is to assign a frequency for a particular call to a phone within the cell. The same
frequency can be used for other calls at the same time using time division multiplexing. The base station
is connected via cables to the cellular exchange computers that control the operation of very many base
stations.

The cellular exchange


Its main function is to allocate a range of frequencies to each cell, with neighbouring cells being allocated
different frequency ranges in order to avoid overlap and interference.
The cellular exchange also offers entry into the fixed telephone system network. If the mobile phone moves
during the call, from one cell to another, the cellular exchange will automatically reroute the phone call to
the base station at the centre of the new cell.

Physics for the IB Diploma


OPTION G: Electromagnetic waves – SL and HL

The nature of electromagnetic waves – Core


Electromagnetic waves (and so also visible light) consist of z
oscillating electric and magnetic fields at right angles to each
other. Both are at right angles to the direction of energy transfer
of the wave. x

The diagram below shows the approximate orders of magnitude


for the wavelength and frequency of various parts of the
y
electromagnetic spectrum.

accelerated molecular molecular atomic atomic atomic nuclear


charges transitions transitions transitions transitions transitions transitions ! You must know the approximate
radio microwave infrared optical ultraviolet X-rays gamma rays
orders of magnitude for the
wavelength of various parts of
the spectrum.
1 10–1 10–2 10–3 10–4 10–5 10–6 10–7 10–8 10–9 10–10 10–11 10–12 10–13 m

108 109 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 Hz

Definition
Dispersion The phenomenon in which the refractive
index depends on wavelength.

Due to dispersion, white light is split into the colours


of the rainbow when it enters a glass prism. This
red
is because glass has a different refractive index for white
light θr
different wavelengths. For example, the refractive
blue
index for red light is lower than for blue light. Red
light will deviate less than blue light as it refracts in a
prism. (Smaller refractive index means larger angle of
refraction θ r and hence smaller deviation.)

Rayleigh scattering – Core


When electromagnetic radiation is incident on a scattered
medium, part will be absorbed, part will be transmitted
through the medium (in the same direction as that transmitted
of the incident beam) and part will be scattered, i.e. medium
radiation will be emitted in all directions.

The incident radiation forces electrons in the medium


to oscillate and these now emit radiation; this is the
scattered radiation.

The scattered intensity is proportional to the


inverse fourth power of the wavelength, I ∝ 1
λ4
(Rayleigh scattering). This means that blue light, with its
smaller wavelength, scatters much more than red light.

OPTION G: Electromagnetic waves – SL and HL


112

The colour of the sky


During the day Light from the Sun entering the Earth’s atmosphere scatters when it travels 1
through air molecules and dust particles. The degree of scattering is largest You must be
for shorter wavelengths (i.e. blue and violet) and least for red. This means prepared to explain
that during the day, if one is not looking directly at the Sun, the colour of the the colour of the sky
atmosphere is dominated by the colour that scatters the most, i.e. blue. during the day and
During a sunset During a sunset (or sunrise) the Sun is low in the atmosphere and the light during a sunset.
travels a longer distance in the atmosphere to get to the observer looking
at the Sun. The blue and violet components of the light have been scattered
away, leaving red and orange as the dominant colours reaching the observer.
The sky from The Moon has no atmosphere and so there is no scattering of light in the
the Moon lunar sky. The sky looks black (when one looks away from the Sun).

Lasers (Light Amplification by Stimulated Emission of Radiation) – Core


Laser light is highly coherent and monochromatic radiation. To understand how laser light is produced we
must first understand the difference between spontaneous emission and stimulated emission of radiation.

Definitions excited state


Spontaneous emission The electron in the excited state makes a transition
to the ground state, emitting one photon of energy equal to the difference in
energy between the ground and the excited state.
ground state

Stimulated emission Einstein suggested that a photon incident on excited state original photon
an atom with an electron in an excited state can force or stimulate the
electron to make a transition down to the ground state, emitting a photon
in the process. The emitted photon will be identical to the first, i.e. it will
have the same frequency, phase and direction. emitted photon
ground state

Optical pumping The idea is to force electrons to make transitions to excited states
excited states. The electrons will then very quickly (within 10−8 s) return to pump
transition metastable state
a metastable state (a state where electrons spend a relatively long time).
Population inversion The situation when the number of electrons in laser light

the metastable state is far greater than the number in the ground state.
ground state

Laser action The electrons in the metastable state make transitions to the
ground state, emitting the laser light photons. These photons, going back
and forth in between mirrors, are used to stimulate the emission of identical
photons. For every photon causing stimulated emission we get a second
identical photon and so very quickly the intense, coherent laser beam is mirror excited atoms semitransparent mirror
built up. Part of the laser beam emerges from the semitransparent mirror.
1
In any exam question you must be prepared to describe the role of optical pumping, population
inversion and stimulated emission of radiation.

Uses of lasers include: modulating light to be used for communications in optical fibres, measuring
distances in surveying, reading information on CDs, DVDs and bar codes, applications to medicine such as
the endoscope and surgery, drilling holes in metals, etc.

Physics for the IB Diploma


113

Lenses – Core
Definition
Focal point The point on the principal axis through which rays parallel to the principal axis pass,
after refraction through the lens.

Converging lenses
A ray of light will, upon entering a lens, refract at both faces of the lens.
In practice, we draw rays halfway into the lens and show the bending taking place only once, inside
the lens.
The line through the middle of the lens and at right angles to its face is called the principal axis of
the lens. There are two important points of the principal axis at equal distances from the lens, the
foci or focal points.

If the rays enter the lens from the ‘other’ side they will
pass through the second focus f ′ of the lens. The two principal axis
foci are at equal distances from the lens. This distance F' F
is called the focal length f. Rays that are parallel to
f
each other but not parallel to the principal axis refract
as shown.
F
To construct an image we must know how at least two rays
will refract through the lens. F'

Three standard rays refract through a converging lens as shown.

standard
ray 2 standard ray 1

F' F

standard ray 3

Determining the image using equations


Definitions
Real image An image formed by actual light rays.
Virtual image An image formed by mathematical extensions of light rays. It cannot be displayed on a screen.
In the two examples on the following pages, an object is placed in front of a converging lens. The position
and size of the image may be determined either by a graphical method or by using the lens equation
1 = 1 + 1 and M = − v
f v u u

where:
u = object distance from lens
v = image distance from lens
f = focal length

The first equation is used to find the image distance v. The second equation is for magnification, which is
defined as M = h′ where h′ is the image height and h the object height. These formulae use the convention:
h
real images are positive and virtual images are negative.

OPTION G: Electromagnetic waves – SL and HL


114

Examples of image formation (1)


An object is placed a distance of 12 cm in front Before you answer
of a converging lens of focal length 4.0 cm. Use both the formula for image distance as well as that for magnification.
Determine the characteristics of the image.

The equation gives: u = 12 cm, f = 4.0 cm so that 1 = 1 − 1 = 1 − 1 = 1 ⇒ v = 6.0 cm. Since v > 0 the
v f u 4.0 12 6
image is real. The magnification is M = − 6.0 = −0.50 implying that the image is inverted (M < 0) and smaller
12
(|M| < 1). If the object size is 4.0 cm the image size is Mh = −0.50 × 4.0 = −2.0 cm. The diagram shows a
graphical solution to this problem.

u v

O I

f f

This construction of an image in a converging lens uses the three standard rays. The scale is 2 cm = 1
horizontal square. Notice that the image can be constructed with just two rays, but the third serves as
a check that the diagram is drawn correctly. Here, the image is real (there are actual rays of light going
through the position of the image), it is inverted and it is smaller in size than the object.

Test yourself 1
Determine the characteristics of the image of an object 3.0 cm tall that is placed 8.0 cm from a converging
lens of focal length 6.0 cm.

Test yourself 2 Test yourself 3


Copy and complete the ray diagram below to form Copy and complete the ray diagram below to form
the image of the object. the image of the object.

Physics for the IB Diploma


115

Examples of image formation (2)


An object is placed a distance of 4.0 cm from Before you answer
a converging lens of focal length 12 cm. Use both the formula for image distance as well as that for magnification.
Determine the characteristics of the image.

The equation gives: u = 4.0 cm, f = 12 cm so that 1 = 1 − 1 = 1 − 1 = − 1 ⇒ v = −6.0 cm. Since v < 0 the
v f u 12 4.0 6
image is virtual. The magnification is M = − −6.0 = +1.50 implying that the image is upright (M > 0) and
4.0
larger (|M| > 1). The diagram shows a graphical solution to this problem.

I O

This construction of an image in a converging lens uses the three standard rays. The scale is 2 cm = 1
horizontal square. Notice that the image can be constructed with just two rays, but the third serves as
a check that the diagram is drawn correctly. The image is virtual (there are no actual rays of light going
through the position of the image, just their mathematical extensions), it is upright and it is larger in size
than the object.

Test yourself 4
Before you answer
An object is placed in front of a converging lens and an image
Does any light from the object go
is formed. The top half of the lens is now covered with opaque
through the lens?
paper. Discuss the changes, if any, in the appearance of the image.

The simple magnifier – Core


Definitions
Near point The closest point to the eye where the eye can focus without strain. The distance to the near
point is denoted by D and is about 25 cm for a healthy eye.
Far point The furthest point from the eye where the eye can focus without strain. The distance to the far
point is taken to be infinite for a healthy eye.
A converging lens can be used as a simple magnifier. A small object is placed closer to the lens than the focal
length. The lens produces a larger, virtual image and thus acts as a magnifier.

OPTION G: Electromagnetic waves – SL and HL


116

Unaided eye Image formed at the near point

u
h'
h θ′ h
θ
image object
D = 25 cm

D = 25 cm (= –v)

The enlarged, virtual image is formed at the near point. The angle the image subtends at the eye (θ ′) is
larger than when the lens is not in place (θ) and so the image appears larger.

The angular magnification is M = θ′ . Now, θ = h and θ′ = h′ so that M = h′ .


θ D
−v
D h ! Use this formula for the image at the
This is the same as the linear magnification given by .
u near point. D is the near point distance.
From the lens formula, 1 = 1 − 1 , so − v = 1 − v . But in this case the image is virtual
u f v u f
and formed at the near point, so the image distance v is equal to −D and M = 1 + D
f

A simple magnifier with the image formed at infinity

h
θ′ In this case, v = ∞ and so u = f. Thus, M = θ′ = h/f = D .
θ h/D f

! Use this formula for the image at infinity.


f

Test yourself 5
An object is placed in front of a combination of
two converging lenses as shown in the diagram.
The objective lens forms an image of this object as screen
shown. The final image in the eyepiece is formed eyepiece
on the screen. Draw a ray diagram to locate the objective

position of the focus of the eyepiece. Use the object

diagram to determine the linear magnification of image


the a objective, b eyepiece and c combination of the
two lenses.

Physics for the IB Diploma


117

The compound microscope – Core


This is used to obtain an enlarged image of a small object very close to the microscope. It consists of two
converging lenses: the objective (near the object) and the eyepiece (near the eye).

The objective lens forms a real enlarged image of the object. This image acts as the object for the eyepiece.
The eyepiece now acts as a magnifier for this object.

In the diagram below, we draw the standard two rays (1 and 2) leaving the top of the object and extend
these to meet the eyepiece lens. We now have a problem because we do not know how these refract in the
eyepiece lens – these are not standard rays. To proceed we use construction rays. First we draw the red
dotted line from the top of the image to the centre of the eyepiece lens. This will continue straight through
the lens. We now extend this red line backwards. Next we draw the green dotted line that leaves the top
of the image and is parallel to the principal axis. This will
refract through the focal point of the eyepiece. We also
extend this backwards. Where the green and red lines D
meet is the top of the final image. The original standard
rays leaving the top of the object may now be completed
1 f
by joining the top of the final image to where these rays o fe
join the eyepiece. Extending these gives their path after 2

refraction in the eyepiece.

In this example, the final image is formed a distance


D from the eyepiece equal to the near point distance,
usually 25 cm. (In the diagram, each square horizontally
corresponds to 2.0 cm.)

The magnification of the compound microscope


The magnification of the microscope is the product of the linear magnification produced by the objective
times the angular magnification of the eyepiece. The objective produces a linear magnification of Mo = − v .
D u
The eyepiece produces an angular magnification of 1 + f where D is shown in the diagram and is the near
point distance. Hence the overall magnification of the microscope is Mo × ⎛⎝ 1 + f ⎛⎝ . In the example shown in
e D
D 25 e
the diagram, Mo = −3.3 and 1 + f = 1 + 6 = 4.2 for an overall magnification of approximately −14.
e

The telescope – Core


fo fe
A distant object subtends a very small angle at
the eye (θ1). The telescope magnifies that angle
to a larger angle θ2. Since the object is far away, θ2
the image in the objective is formed a distance h
θ1 θ1
of fo from the objective. Here the final image is
formed at infinity. This means that the image in
the objective is formed a distance equal to fe from objective eyepiece
the eyepiece. The separation of the lenses is then image at infinity
fo + fe. The angular magnification of the telescope
θ f
is given by M = 2 = o .
θ1 fe

Test yourself 6
Considering the diagram of the telescope, explain the formation of the final image by the eyepiece lens.

OPTION G: Electromagnetic waves – SL and HL


118

Lens aberrations – Core


Chromatic aberration
Because glass has a slightly different refractive index for different
wavelengths of light, light of different wavelengths will come to focus
at slightly different points. This results in a coloured, blurred image.

The situation may be partially corrected by using the lens in a


combination with a diverging lens. The chromatic aberration caused
by the second lens is opposite to that caused by the first. (Strictly this
corrects the problem for just two different wavelengths – the problem
persists for the rest but is reduced.) white

Spherical aberration
This is due to the fact that rays far from the principal axis come to a
focus closer to the lens than where paraxial rays (rays close to the axis)
focus. This results in an image with less detail, as well as blurring and
curving at the edges. Because the rays far from the axis also have a
different magnification, an image of a straight edge object may appear
curved.

The problem is reduced by blocking those rays that are far from the
principal axis of the lens, in a procedure known as stopping down.

This reduces the amount of light through the lens and so reduces the
brightness of the image.

Two-source interference – Core


Conditions for two-source interference
• The two sources must be coherent sources of radiation of roughly
the same amplitude. Coherence means that the phase difference
between the sources is constant in time.
• In addition the two sources must produce radiation with the same
polarisation.

to P
Young’s two-slit experiment S1
Light that is incident normally on the two slits will diffract at each slit.
This means light can be observed at an angle θ to the original direction θ
d
of light.
The path difference is the distance S2Z which equals d sin θ. S2
Z

We have constructive interference when d sin θ = nλ and n is an integer. P

sn sn
From the second diagram we see that tan θ = .
D
θ
d M
s D
Because the angle is small, sin θ ≈ tan θ and so d n = nλ. Thus the
D
distance on the screen from the centre to the nth maximum is given
nλD
by sn = .
d

Physics for the IB Diploma


119

The intensity pattern from two sources


The diagrams show the intensity observed far from the two sources as a function of the distance s along the
screen. The pattern shows equally spaced maxima whose intensity is the same.
The first graph shows the pattern with large The second graph shows the pattern with smaller
slit separation. Fringes are close together. slit separation. Fringes are further apart.

I I

s s

λD
The separation Δs of two consecutive maxima (or minima) is given by Δs = .
d
D = distance to screen
d = separation of slits

Test yourself 7
In a Young two-slit experiment, light of wavelength 656 nm is incident on two very narrow slits a distance of
0.125 mm apart. Calculate the angular width of the central maximum.

Test yourself 8
Before you answer
Light carries energy. What happens to the energy of two waves that interfere destructively?
Energy must be conserved.
Test yourself 9
Two coherent sources of light of equal amplitude produce an interference pattern. Before you answer
Describe the changes to the fringes if the amplitude of one of the sources is reduced. Examine carefully what happens
at a the maxima and b the minima.
The diffraction grating – Core
The discussion from the two-slit case shows that with a smaller slit separation I
we get fringes that are further apart. 35

This is exploited in the diffraction grating, a device that has a very large 30
25
number of very narrow, parallel slits.
20
• With more than two slits we see that we have secondary maxima in 15
between the primary maxima. (Shown here are six slits, diagram a.) 10
• The importance of the secondary maxima becomes negligible as the 5
number of slits increases. θ/°
–30 –20 –10 0 10 20 30
• The primary maxima become narrower and more intense. a

Diagram b shows the fringe pattern for 2, 4 and 6 slits. Notice that the two slits
principal maxima are at the same location.

four slits
Test yourself 10
A diffraction grating has 600 lines per mm. Light consisting of two
wavelengths 589.0 nm and 589.6 nm is incident normally on the grating. six slits
Determine the difference between the diffraction angles of the two
wavelengths in a the first-order and b the second-order maxima.

OPTION G: Electromagnetic waves – SL and HL


120

X-rays – HL
In an X-ray tube, electrons are emitted from a X-rays
heated filament and are accelerated towards a
metal target. The electrons produce X-rays for two vacuum
distinct reasons. This can be seen in the spectrum target
of the X-rays produced, which shows a curved
continuous spectrum and distinct peaks of intensity
at specific wavelengths.
accelerating voltage

Continuous part of the spectrum: First, the electrons suffer enormous decelerations as they strike the
target and decelerated charges give out radiation. Because the magnitude of the acceleration varies, photons
of many different wavelengths are emitted.

Discrete part of the spectrum: Second, the electrons may collide with electrons inside the target atoms
and knock them out of the atoms. Atom electrons in higher energy states will then make a transition to the
vacated energy level thereby emitting photons of a specific energy (equal to the difference in energy of the
energy levels in the transition).

An electron accelerated from rest by a potential


difference V acquires a kinetic energy eV. When all of
this energy is converted to a single photon,
hc hc
= eV, and so λ = .
λ eV
Intensity

This is the smallest possible wavelength that can be


emitted by an X-ray tube operating at a voltage V.
high potential
The graph shows the two X-ray spectra for the same
target element but different accelerating voltages. low potential

Wavelength
! Notice how the minimum wavelength shifts as V increases.

1
You must be prepared to describe and annotate an X-ray tube and explain the production of the
continuous and discrete part of the X-ray spectrum. You must also be able to explain why there is a
minimum wavelength produced.

Test yourself 11
Calculate the minimum wavelength produced in a 25 kV X-ray tube.

Physics for the IB Diploma


121

X-ray diffraction
When X-rays are directed at a crystal, there are angles at which
the reflected X-ray intensity is very large. This is explained by
assuming that the maxima are due to constructive interference
of X-rays diffracting off the regularly arranged atoms in various d
θ1 θ2
crystal planes.
The diffracted beam is strong if two conditions are satisfied:
θ1 = θ2 (= θ) and 2d sin θ = nλ (the Bragg formula).
The first condition ensures that X-rays diffracting from the
top layer constructively interfere with each other. The second θ θ
condition ensures that X-rays diffracting from the top layer
constructively interfere with those from the second layer. θ θ
d
From the diagram, the path difference is 2d sin θ and we will
d sin θ d sin θ
have constructive interference if this is an integral multiple of
the wavelength.

Test yourself 12
X-rays of wavelength 3.80 × 10−11 m are incident on a crystal. The smallest angle between the X-ray beam
direction and the crystal surface where a maximum in scattered in intensity is observed is 25.3°. Determine
the spacing between the crystal planes.

Thin-film interference – HL
Parallel films
Phase change upon reflection: When a ray of to observer
air
light reflects off a surface that has a higher index of phase change
refraction than the medium from which the ray is here

incident, a phase change of π will take place. In the oil d


diagram, the ray in air reflects from the top surface
of oil. Since the refractive index of oil is greater than medium of refractive no phase change
index less than that of oil here
that of air a phase change takes place. The second
reflection at the bottom surface of oil does not result
in a phase change.

The two reflected rays will interfere. At normal incidence, the path difference is 2d where d is the thickness
of the film. So we will have destructive interference if 2d = nλ (n = 0, 1, 2, 3…) and constructive
1
interference if 2d = (n + 2 )λ (n = 0,1,2,3,…) where λ is the wavelength of light in the oil.

Thus, observing from above, a layer of oil floating in water will show a coloured oil film. The colour seen is
determined by:
• white minus that colour whose wavelength that destructively
! Because the oil film has variable thickness,
interferes and different colours are observed at different
• the colour that constructively interferes. parts of the film.

Applications: The idea of thin-film interference is used mainly in high-quality lenses where a thin coating
on the lens causes destructive interference for certain wavelengths of light, thus reducing the amount of
reflected light.

OPTION G: Electromagnetic waves – SL and HL


122

Wedge films
In the diagram, a very thin object of thickness D is placed in between two incident light
glass plates a distance L from where the plates join. As a result, the angle θ
between the plates is very small. The idea is to measure this small angle and
hence the small thickness D.
d D
θ
x
L

Let d be the separation of the plates at a distance x


from where the plates join. Destructive interference
takes place if
2d = nλ (n = 0, 1, 2, 3…)
bright fringe separation Δx
Since d = x tan θ we have that Δd = Δx tan θ.
plates join here

Consecutive bright fringes correspond to air wedge


λ
heights that differ by 2 . So if Δx is the separation of
Δd
two consecutive bright fringes, tan θ = . Then
Δx
D = L tan θ.

Test yourself 13
White light is incident normally on a soap film of index of refraction 1.33. The thickness of the film is
assumed to be uniform and equal to 0.26 μm. Explain why the soap film appears turquoise (cyan) in colour.

Test yourself 14
Referring to the standard diagram of wedge films shown, the wavelength of light used is 520 nm and the
separation of two consecutive bright fringes is 0.15 mm. The length L is 5.0 cm. Calculate the thickness D.

Physics for the IB Diploma


OPTION H: Relativity – SL Option D and HL

Frames of reference – SL Option D and HL


Relativity deals with events, i.e. occurrences at specific times and specific places. To specify the times and
positions of events we use reference frames.
Definitions
Reference frame A coordinate system (three dimensions for space and one for time) used to record the
time and position of an event. An event thus has four coordinates (x, y, z, t). In this course we mainly deal
with just one space coordinate, x.
Inertial reference frame A reference frame that is not accelerating.
Rest frame of an object The frame of reference in which the object is at rest.
S’
An event (lightning strike) is given the coordinates (x, t) by a stationary v
observer in reference frame S. An observer in reference frame S′, which object moving
is moving relative to frame S, assigns the coordinates (x′, t′) to the same S 0
event. An object is measured to have speed u by S and u′ by S′. 0 vt x'
How are the two sets of measurements related? In pre-relativity physics,
x
the answer is given by Galilean transformation equations:
Equation 1: t′ = t
Equation 2: x′ = x − vt
Equation 3: u′ = u − v

The Galilean transformation equation, Equation 3, applied to light shows that light moves with different
speeds relative to different observers. If S measured a speed u = c for light then S′ would measure a speed
u′ = u − v = c − v. Conversely if S′ measured a speed c for light, S would measure u = c + v.
On the other hand, Maxwell’s laws of electromagnetism showed that the speed of light in a vacuum is a
universal constant independent of the speed of its source.
Einstein solved the problem by trusting the laws of electromagnetism and changing the Galilean
transformation equations. And this implied great changes in physics!

The postulates of relativity


Postulate 1 The speed of light in a vacuum is the same for all inertial observers.
Postulate 2 The laws of physics are the same for all inertial observers.

Test yourself 1
In a certain inertial reference frame S, lightning strikes at x = 3 × 108 m. An observer is standing at the
position x = 6 × 108 m. Light from the strike arrives at the observer when his clock shows t = 3 s. What are the
coordinates of the event ‘lightning strikes’ according to this observer?

! The time of an event is recorded by the clock at the position of the event. This question illustrates a very
common mistake.

OPTION H: Relativity – SL Option D and HL


124

Time dilation and length contraction – SL Option D and HL


Time dilation – the light clock
A ray of light leaves the base of a box and is directed parallel to the walls to a point directly above, where it is
reflected and is received back at the source.

The first diagram represents the point of view of S′,


the reference frame of an observer inside the box.
L

2L
c= or c2(t′)2 = 4L2 I
t′

The next diagram represents the point of view of S, v


the reference frame attached to the ground.

1
The speed of light is the same for
both observers. This next derivation vt
is frequently asked for in exams. v2t2
2 L + 4
2

c= II
t
c t = 4L2 + v2t2
2 2

Substituting 4L2 from I into II gives


t′
v2
c t = c (t′) + v t ⇒ (c − v )t = c (t′) ⇒ t (1 − 2 ) = (t′) ⇒ t = 1 − v2 .
2 2 2 2 2 2 2 2 2 2 2 2 2

bring this term now divide


c now take c2
to the left by c2 square roots

Proper time interval


The time interval between two events that happen at the same point in space is called a
proper time interval.

The time interval between any two events is equal ! A very common mistake: do not think that the
to time interval = γ × proper time interval where v is
‘moving frame’ always measures proper time
the relative speed of the two observers.
intervals.
γ
20 1
15 The ‘Lorentz gamma factor’ is: γ = .
v2
10 1−
c2
5
0
0 0.2 0.4 0.6 0.8 1.0
v/c ! Notice that γ → ∞ as v → c.

Physics for the IB Diploma


125

Time dilation and length contraction – questions


Definition
Proper length (or rest length) The length of an object as measured in the object’s rest frame.
If the object moves with speed v with respect to an observer, that observer will measure a smaller length
2 L
given by L = L0 1 − v2 or L = 0 .
c γ

! Only those lengths in the direction of motion contract. The density of the object will increase since the
volume will get smaller, according to the observer with respect to whom the object moves.

Test yourself 2
A container of radioactive material is in a rocket that moves past a lab at a speed of 0.80 c. The half-life
of the radioactive material is 12 minutes according to an observer in the rocket. Consider the events:
Event 1 = rocket observer measures N0 nuclei of the radioactive material in the container.
N
Event 2 = rocket observer measures 0 nuclei of the radioactive material in the container.
2
What is the time interval between the two events according to a the rocket observer, b the lab observer?
c At the time found in b, what is the number of radioactive nuclei in the container as measured by the lab
observer?
Test yourself 3
A spacecraft moving at 0.80 c relative to Earth, passes the Earth on its
0.80 c
way past a planet a distance of 40 ly as measured by Earth. Calculate
the time taken to arrive at the planet according to a Earth observers,
b spacecraft observers.
planet
40 ly
Before you answer
This is such a basic example that you must learn it well.

The spacecraft continues to move past the planet. As it passes the


planet it sends a radio signal to Earth. Calculate the time taken
for the signal to arrive at Earth according to c Earth observers, 0.80 c
d spacecraft observers. planet
40 ly
Before you answer
c Notice that the speed of the signal is c. d It is very tempting
to use the answer in a in the time dilation formula. But we
can only do that if we have a proper time interval and here
we do not readily have one.

! It is important that you realise that ‘spacecraft’ clocks do not necessarily read proper time and that
spacecraft clocks always read less time than ‘stationary’ clocks. The point of question 3 is to point this
out. Motion is relative!

OPTION H: Relativity – SL Option D and HL


126

Simultaneity – SL Option D and HL


Two events are called simultaneous if they occur at the same time.
If the two events are simultaneous and they take place at the same point in space according to one
observer then they will be simultaneous for all other observers as well.
However, if two events are simultaneous for one observer and take place at different points in space, then
they will not be simultaneous for another observer in motion relative to the first.

A gedanken (thought) experiment


A box moves to the right with speed v relative to the ground. Two light signals are emitted towards the left
and right ends of the box from a point midway in the box. The signals are emitted simultaneously according
to an observer at the middle of the box. Do the signals arrive simultaneously at L and at R according to the
observer inside the box and an observer on the ground?

The first diagram shows the view according to an observer


inside the box. L R

For the observer in the box:


• Light travels at the same speed, c, towards L and R.
• Distances to L and R are the same.
• Hence the light signals will arrive at the same time.

The second diagram shows the view according to


observers on the ground.
L R Before

For the observer on the ground: ground

• Signals were emitted simultaneously according to


the ground observer (because they were emitted L R Now
simultaneously at the same point).
• Light signals move towards L and R with same
speed, c.
• But end L is moving towards the light signal and R
away from it.
• The arrival of the signals will not be
simultaneous. L will receive the signal first.

Test yourself 4
A ground observer G is halfway between two
rocket R
buildings. According to G, two lightning strikes
hit the buildings at the same time, just as a rocket
passes G. Which building is hit first according to the
rocket observer R?
G

! It would be meaningless to say that the rocket


left right

observer travels towards the right-hand building and


so ‘sees’ the light from the right-hand building first.

Physics for the IB Diploma


127

Experimental evidence for special relativity – HL


Muon decay experiments
Muons are unstable particles that decay into electrons. Muons may be created in the atmosphere
when cosmic rays from the Sun interact with air molecules.

Consider muons created at a height of 1 km from the Earth’s surface (a height measured by
Earth observers). Assume that the speed of the muons is 0.95 c towards the Earth surface.

The proper lifetime of the muons is 2.2 × 10−6 s. The gamma factor for a speed of 0.95 c is γ = 3.2.

Without relativity, the distance travelled by muons before they decay would be
0.95 × 3 × 108 × 2.2 × 10−6 = 630 m. So most muons would have decayed before reaching the Earth’s surface.

According to the Earth observer According to the observer moving with muons
The muon lifetime is time dilated The Earth surface is moving upward towards the muons at a
to 3.2 × 2.2 × 10−6 = 7.0 × 10−6 s. speed of 0.95 c. The distance of 1 km is length contracted to
In this time muons travel a distance 1000 = 310 m. In a time of 2.2 × 10−6 s the Earth’s surface moves a
of 0.95 × 3 × 108 × 7.0 × 10−6 ≈ 2 km. 3.2
distance of 0.95 × 3 × 108 × 2.2 × 10−6 = 630 m.
Hence most muons make it to the
Hence by the time the Earth surface arrives at the position of
Earth’s surface before decaying.
the muons, most muons have not decayed.
This is evidence for time dilation.
This is evidence for length contraction.

The Hafele–Keating experiment


In this experiment, two very accurate atomic clocks were compared after one of them had been put on a plane
that travelled for a few hours. Upon comparison, the time that had elapsed according to the clock on the plane
was slightly less than according to the clock that stayed on Earth, just as relativity predicts.

The Michelson–Morley experiment


The purpose of this experiment was to measure the speed of the Earth relative to the ether (an outdated
hypothesis of a medium for light).
In a frame at rest relative to the ether, the speed of light was the constant c, but in frame that moved relative
to the ether, the speed of light was expected to be different from c.

light source

Expected speed of light in direction shown:


mirror
semi-transparent
M1
mirror S
⎯⎯→ c − v
telescope
←⎯⎯ c + v
⏐ ↑ c
⏐ or ⏐ v2
v ↓ ⏐ 1 − c2
orbital speed of Earth

mirror M2

Light from a source followed the paths shown. The split beams of light were joined at the telescope where
interference fringes were seen. The apparatus was then rotated by 90°. They expected a change in the phase
difference between the split beams and so a shift of the interference fringes. But no such shift was detected!
In relativity this ‘null’ result is explained by saying that no ether exists and the speed of light in vacuum is the
same for all inertial observers.
OPTION H: Relativity – SL Option D and HL
128

Velocity addition – HL
Consider a frame of reference S′ that moves with velocity v relative to another frame of reference S. The
speed of an object is measured to be u by S and u′ by S′. The two speeds are related by

u−v u′ + v
u′ = uv or u=
1− 2 u′v
c 1+ 2
c

Velocity addition and light


If the ‘object’ above is a ray of light then both S and S′ must measure the same speed, c. If for example u = c,
u−v c−v c−v c−v
then u′ = uv = cv = v = c − v = c.
1− 2 1− 2 1−
c c c c

The twin ‘paradox’


Arnold gets in a spacecraft that will take him on a long trip at relativistic speeds. He leaves behind his twin
sister, Beatrice. Arnold returns after some time. Arnold expects that he has aged less than his sister. Beatrice,
who studied relativity, claims that it is she who will be younger when she is reunited with Arnold because
she claims that it is the Earth that moved away from the spacecraft.
Both cannot be right.

Resolution of the twin paradox


Arnold must have accelerated at some point in the trip. Either by stopping to turn around or by going in a
circle. This means that he is in a different inertial frame of reference on the return trip. Beatrice was in the
same inertial frame all the time. This lack of symmetry implies that Arnold aged less.

Test yourself 5
Two spacecraft, A and B, are approaching each other
A B
head on. The speed of A as measured by an observer on
the ground is 0.80 c. The speed of B relative to the ground 0.80 c 0.40 c
is 0.40 c. Calculate the speed of B relative to A.
ground

Before you answer


What are v, u and u′?

Physics for the IB Diploma


129

Relativistic mechanics – HL
Definitions
Momentum At low speeds, γ ≈ 1, and the definition then agrees with Newtonian physics:
p = mv 2 or p = γmv
v
1− 2
c
Total energy This is the famous formula that can be interpreted as showing the equivalence of mass and
energy.
2
E = mc 2 or E = γmc2
v
1− 2
c
Rest energy This is the energy needed to create the particle from the vacuum. In the frame of reference
where a particle is at rest (the particle’s rest frame) there is still energy in the particle, E0 = mc2, since γ = 1 then.
Kinetic energy In the particle’s rest frame, γ = 1, and so EK = 0. This is defined as the total energy minus the
rest energy, i.e. EK = γmc2 − mc2 = (γ − 1)mc2. (For low speeds, this formula approximates to EK ≈ 1 mv2 but we
2
never use this formula in relativity.)
Rest mass This is the mass of a particle as measured in its rest frame.
Energy and momentum are related by E2 = (mc2)2 + p2c2

Units
E
Given that the rest energy of a proton is E0 = 938 MeV we use E0 = mc2 to find m = c20 = 938 MeV c−2 .
Similarly, the momentum of a proton of total energy E = 1250 MeV is
E2 = (mc2)2 + p2c2
1250 MeV2 = 9382 MeV2 + p2c2
2

pc = 12502 − 9382 MeV


pc = 826 MeV
p = 826 MeV c−1

v A constant force is applied to a body initially at rest. In


Newtonian mechanics (curve labelled N) the velocity
increases without limit. In relativity (curve R) the body
N
never reaches the speed of light (dashed line).
1
Notice that both curves are identical at low
speeds. It is important to show this in an exam.
c
R You must be able to explain why a particle with
non-zero rest mass cannot reach the speed of light
t by referring to the infinite amount of energy (E
→ ∞ as v → c ) required, which makes it impossible.

Accelerating potentials
When a particle of charge q is accelerated by a potential difference V then qV = ΔE, where ΔE is the change in the particle’s total
energy.

OPTION H: Relativity – SL Option D and HL


130

A few standard relativistic mechanics questions

Test yourself 6
Calculate the speed of a proton (mass 938 MeV c −2) whose momentum is p = 2800 MeV c −1.

Test yourself 7
Calculate the accelerating voltage required to accelerate an electron (mass 0.511 MeV c −2) to a speed of 0.98 c.

Test yourself 8
Calculate the kinetic energy of a proton (mass 938 MeV c −2) of speed 0.950 c.

Test yourself 9
Calculate the momentum of a muon (μ−, mass 106 MeV c −2) of total energy 540 MeV.

Test yourself 10
Calculate the speed of a tau particle (τ −, mass 1800 MeV c −2) whose total energy is 6500 MeV.

Test yourself 11
The rest mass of the ϕ meson is about double that of the η meson. The speed Before you answer
of a ϕ meson is half that of an η meson. Which particle has the greater Recall the definition of relativistic momentum
momentum? – this is not a classical mechanics problem!

Test yourself 12
pc2
a Show that the speed of the particle of total energy E and momentum p is given by v =
E . Use this formula
to deduce that a massless particle always moves at the speed of light. A particle has total energy E = 654 MeV
and momentum p = 640 MeV c −1. Calculate b the speed of this particle, c the rest mass of the particle.

Test yourself 13
A proton is accelerated from rest by a potential difference 3.2 × 109 V. Before you answer
Calculate the speed and momentum of the accelerated proton. Recall that qV = ΔE.
1
You will have to perform this calculation in most exam papers.

Test yourself 14 Before you answer


Calculate the speed of a proton whose momentum is p = 2.40 GeV c −1. Look at the available formulae and decide on
the most convenient.
Test yourself 15
A Ψ meson has rest mass 3100 MeV c −2. It decays at rest in a lab into a muon–antimuon pair.
The rest mass of the muon and that of the antimuon is 106 MeV c −2. Determine the momentum
of the muon relative to the lab.

Physics for the IB Diploma


131

General relativity – HL
The equivalence principle and its consequences
‘Acceleration mimics gravity’: it is impossible to distinguish effects of acceleration and effects of
gravitation.
However, you must also understand its other (more detailed) equivalent formulations.

! It is important that you learn


Version 1 A frame of reference accelerating with acceleration a
in outer space (i.e. far from all masses) is equivalent to a frame of
both versions of the principle.
reference that is at rest in a gravitational field of field strength g = a.
Version 2 An inertial frame of reference moving at constant velocity
in outer space (i.e. far from all masses) is equivalent to a frame of
reference that is falling freely in a gravitational field.
The diagram shows an example. If you drop an object in a
Frame 2 it will fall to the floor because of gravity. Frame 1 Frame 2

If you drop the same object in Frame 1 it will


also appear to fall to the floor because the floor is g=a
accelerating upwards.

outer space planet

Two consequences of the equivalence principle


1 Bending of light
Consider a box that is freely falling in free
X
a gravitational field. A ray of light that fall
is emitted from the left wall of the box
will travel on a straight line and hit the
right wall at a point (X) according to an
But the box is also seen to be falling by an observer outside.
observer inside the box (path of light
By the time the light ray goes across, the box has fallen and so
shown by the yellow line).
the ray appears to be following the curved path shown in blue.
Thus the outside observer claims that in a gravitational field,
light bends towards the mass causing the field.

2 Gravitational redshift
The first diagram shows a box at rest on a planet. The second
diagram shows a box accelerating in empty space. A ray of
light is emitted from the base of the box. To observers outside,
the top of the box is moving away from the light and so the box at rest on a planet
frequency measured at the top will be less than that emitted,
according to the Doppler effect. Hence a ray of light rising in a
gravitational field will have its frequency reduced.
a

box accelerating

OPTION H: Relativity – SL Option D and HL


132

Gravitational time dilation – HL

! You must be prepared to use the equivalence principle in order to deduce the bending
of light in a gravitational field, gravitational redshift and gravitational time dilation.

frequency low We have learned that a ray of light travelling higher in a gravitational field will have its
frequency reduced: the gravitational redshift.

But frequency is the number of wavefronts received per second, so how can the
frequency change? The answer has to be that when one second goes by, according
to a clock at the base, more than a second goes by, according to a clock at the top, i.e.
frequency high the equivalence principle predicts gravitational time dilation: the interval of time
between two events is longer when measured by a clock far from the source of the
gravitational field compared to a clock near the source.

acceleration outer space Test yourself 16


A rocket accelerates in outer space far from all masses. A ray of light is emitted
in a direction that is initially parallel to the base of the rocket from a point
a height h from the base. State and explain whether the ray will meet the
opposite side of the rocket at a height that is less than, equal to or greater
h than h.

base Before you answer


Use the equivalence principle to find an equivalent situation where you
know the answer.

Test yourself 17
A ray of light is emitted, initially horizontally, in a lab on
Before you answer
Earth of length 300 m. Estimate the amount by which the
Use the equivalence principle to find an
ray will bend downwards after travelling the length of the lab.
equivalent situation where you know the answer.

Test yourself 18
A rocket accelerates in outer space far from all masses. outer space

A ray of light is emitted from the back to the front of the


rocket. State and explain whether the observers at the
front of the rocket will receive a smaller, equal or higher
frequency of light than the emission frequency at the back. acceleration

Before you answer


Use the equivalence principle to find an
equivalent situation where you know the answer.

Physics for the IB Diploma


133

Experimental evidence for general relativity – HL


The bending of light experiment
To test the amount of bending of light by the Sun, an observation was undertaken by A. S. Eddington in an
expedition to West Africa in 1919.

A star was observed during a total solar eclipse (the eclipse was needed so that the star could be seen during
the day). Rays from the star had to pass close to the Sun and so were slightly bent. This means that the
position of the star in the sky appears slightly different than when the star is observed with the Sun out of
the way. The measured angle of bending was in agreement with Einstein’s theory.

The true position of the star was known from measurements at a time when light from the star reached the
Earth without going past the Sun (i.e. Diagram for Eddington’s apparent star
6 months before or after the situation observation position
shown in the diagram).

true star
For a ray of light just grazing the surface position
of the Sun the angle of deviation is only
about 4 × 10−4 degrees! Sun
Earth

Moon
Gravitational redshift
photon In the Pound–Rebka–Snider gravitational redshift experiment,
has lower
frequency
photons of frequency f emitted on the surface of the Earth are
here observed a distance H higher, above the Earth’s surface. The
frequency is predicted to be less than the emitted frequency
according to: Δf = gH .
H f c2

Pound, Rebka and Snider performed experiments (in 1960 and


emitted
photon 1964) to verify this relation. For a tower of height 30 m we have
10 × 30
has that Δf = ≈ 3 × 10−15 so the experiment must be able to
frequency f 9 × 1016
f measure frequency to 15 decimal places!

The Shapiro time delay test


The two spacecraft are at equal distances from the Earth.
Signals are sent to both spacecraft from Earth and their Sun
reflections are received back at Earth. The signal to the
spacecraft at the right will return to Earth a short time Earth
after that from the left spacecraft, i.e. with a time delay.

The signal to and from the right spacecraft passes near


the massive Sun and so suffers a time delay for two
reasons: diagram not to scale

• signal bends
• signal suffers gravitational time dilation.

OPTION H: Relativity – SL Option D and HL


134

Curved spacetime – HL
Spacetime is the four-dimensional continuum (three space and one time) in which physical phenomena
take place.
The theory states that four-dimensional spacetime gets curved by the mass and energy it contains.

When space contains no matter or energy it is … but it curves in the presence of matter or energy.
flat … Far from the source, the curvature is less.

The straight line path shown above is a geodesic in flat


spacetime, the path followed by an object on which no forces
act. The curved line path shown on the right is a geodesic in
curved spacetime, the path followed by an object on which no
forces act. It is the path of least length.

Light travels on geodesics.

Gravitational lensing refers to multiple images of the same


object caused by the bending of light by a very massive object
in the path of the light.

The picture shows four images of the same distant quasar.


The images have been formed by light that has bent
around the massive galaxy that is directly in front of the
quasar and appears at the centre of this picture.

Test yourself 19
Explain how Newton and Einstein would account for the motion of a planet around the Sun.

Physics for the IB Diploma


135

Black holes: the extreme prediction of general relativity – HL


A black hole is a ‘singularity of spacetime’, a point of infinite
spacetime curvature. event horizon

Nothing taking place within the event horizon (a sphere


around the black hole of radius equal to the Schwarzschild
radius) can be communicated to the outside and nothing
can move from inside the event horizon to the outside.
black
hole Schwarzschild
radius
Definition
Schwarzschild radius This is the distance from the
black hole where the escape speed is equal
! Since mass constantly falls into
the black hole, the Schwarzschild
to the speed of light: RS = 2GM
c2 radius constantly increases.
For the Sun to become a black hole, its radius
would have to be smaller than
2 × 6.67 × 10−11 × 2.0 × 1030
! It is crucial that you can reproduce this
RS = ≈ 3 km.
(3.0 × 108)2 calculation for other masses.

Time dilation near a black hole.

! This is an example showing that mass bends not just space but also time, i.e. spacetime.

The time interval between two events is measured by a clock near a black hole and by a clock very far from
it: the clock near the black hole reads Δt0 and that far away reads Δt. General relativity predicts that
Δt0
Δt =
R
1− S
r
where r is the distance of the near clock from the centre of the black hole and RS the Schwarzschild radius of
the black hole. As we get close to the event horizon, r → RS, Δt → ∞, i.e. it appears to the far away observer
that time near the event horizon is stopping. More precisely, according to the clock near the event horizon it
takes Δt0 = 1 s for the tick of the clock. According to the far away clock very many seconds are needed before
the clock ticks again.

Test yourself 20
A probe near a black hole of Schwarzschild radius RS = 5.0 × 108 m emits one pulse every second. The pulses
are received every 5.0 seconds by a spacecraft far away. How far from the event horizon of the hole is the
probe?

OPTION H: Relativity – SL Option D and HL


OPTION I: Medical physics – HL

The parts of the ear and their functions


Definitions
Outer ear Consists of the pinna and the auditory canal ending at the eardrum outer pinna inner ear
ear semicircular canals
(tympanic membrane).
tympanic membrane cochlea
Sound incident on the eardrum through the auditory canal forces the membrane auditory vestibular
to vibrate. canal nerve

Middle ear With the eardrum at its entrance, the middle ear houses the
ossicles. These are small bones that move as result of the vibrations and act as a middle ear cochlear
nerve
lever system, amplifying the amplitude of the sound incident on the eardrum. malleus incus
stapes
auditory ossicles
Inner ear Begins at the oval window and houses the cochlea. oval window
Sound reaching the cochlea is analysed into its component frequencies. Eustachian tube

Sound amplification and reception


The action of the ossicles exerts a force on the oval window.

A2
A1

eardrum oval window

The same force acts on the eardrum and the oval window. But because the areas are different, the pressures
are different:
p A
F = p1A1 ⇒ p1A2 = 2 = 1
p1 A2
The signal is now in the cochlea of the inner ear. The basilar membrane in the cochlea distinguishes the
different frequencies present in the incoming sound and its many nerve endings feed the signal (now as
electrical impulses) to the brain.

Mismatch of impedances
The acoustical impedance, Z, of a medium is defined as the product of the speed of sound in the medium
multiplied by the medium’s density, Z = ρc.

When a wave moves from a medium of impedance Z1 into


a medium of impedance Z2, the fraction of the incident
Z − Z ⎞2
! intensity that is reflected is ⎛⎝ 1 2 ⎠ . So for a wave to enter a
This material is also relevant for Z1 + Z2
ultrasound imaging – see page 141. new medium with as little reflection as possible, the two media
must have very similar impedances.

But the region up to the oval window is filled with air of very low impedance and the region behind the oval
window is filled with the cochlear fluid of very high impedance.

This mismatch of impedances means that it is necessary to amplify the sound wave arriving at the oval
window so that some of it can be transmitted.

Physics for the IB Diploma


137

Sound intensity level


Definitions
Intensity of sound The power of a wave (here sound) per unit area.
Sound intensity level, IL Defined in terms of the intensity of sound I and a reference intensity
I
I0 = 10−12 W m−2 as IL = 10 log . This gives the IL in decibels (dB).
I0
The healthy human ear is sensitive to sounds of a frequency ranging from 20 Hz to 20 kHz.

If the intensity of a sound is doubled, the ear does not perceive this change as a doubling in the hearing
sensation of the sound, however. Rather, the ear has a logarithmic response to intensity: this means that
I
if the intensity of sound increases from I1 to I2, the increase in the hearing sensation is 10 log 2 .
I1

Ordinary conversation IL The IL for ordinary conversation in a room is approximately 60 dB. This
I I I
corresponds to a sound intensity of 60 = 10 log ⇒ log = 6 ⇒ = 106 ⇒ I = 106 × 10−12 = 10−6 W m−2.
I0 I0 I0
Pain threshold This happens at a sound intensity of
approximately I = 1.0 W m−2 corresponding to an 80
1.0
intensity level of IL = 10 log −12 = 10 × 12 = 120 dB. 70
10
Threshold of hearing The minimum intensity of
60
sound that can be perceived by a person at a given
frequency. It depends on frequency according to 50
the graph on the right.
Intensity / dB

40

30

20

10

–10
10 100 1000 10 000
Frequency / Hz

Test yourself 1
A sound is increased in intensity from 1 × 10−6 W m−2 to 2 × 10−6 W m−2. Another sound is increased from
2 × 10−6 W m−2 to 3 × 10−6 W m−2. Would a healthy normal ear perceive the change in loudness in the two cases
to be the same or not? Explain your answer.

Test yourself 2
The intensity of a sound increases from 1.0 × 10−10 W m−2 to 1 .0 × 10−8 W m−2. By how many decibels does the
sound intensity level change?

Test yourself 3
The sound intensity level due to a machine is 95 dB. How many machines must be operating at the same
time for the sound intensity level to become 102 dB?

OPTION I: Medical physics – HL


138

Audiograms and hearing loss


Hearing can be monitored with an audiogram: the patient is supplied with very faint sounds of a specific
frequency through earphones and their intensity is increased until they are just audible to the patient. A
typical example is the audiogram at the bottom of the page (consider first the data points represented by
circles). At a frequency of 1000 Hz, a sound must increase in intensity by 45 dB and by 70 dB at 4000 Hz, if
these sounds are to be audible by the patient. This defines what is called a hearing loss in dB. At 1000 Hz,
therefore, the intensity of sound must be increased (for example by a hearing aid) by a factor of
I
Δβ = 45 dB = 10 log I ⇒ I = Io × 104.5 where Io is the intensity prior to amplification.
o

Definitions
Air conduction Sound that reaches the inner ear via the outer and middle ears.
Bone conduction Sound can reach the cochlea through the bones of the head and thus the audiogram
is performed not only with earphones but also with an oscillator (placed at the bottom of the skull) that
transmits the sound into the bones.

Types of hearing loss


Sensory nerve Damage to the hair cells in the cochlea and neural pathways to the brain
deafness (e.g. due to tumours of the acoustic nerve or meningitis).
Audiograms in which the data points for air and bone conduction almost
coincide are certainly due to cochlea/nerve problems in the inner ear.
Conduction Damage to the middle ear prevents the transmission of sound into the inner ear
deafness and the cochlea.
This may be due to the plugging of the auditory canal by foreign bodies, such as
wax, thickening of the ear drum due to repeated infections, destruction of the
ossicles, and too rigid an attachment of the stapes to the oval window.

Exposure to noise and loud sounds


There are short- and long-term effects to exposure to loud sounds. Short-term effects are usually
associated with a condition called tinnitus, a ‘ringing’ sound in the ear. Long-term effects include
permanent damage to nerves.
The graph below shows an audiogram for air (circles) and bone (arrows) conduction.
There is a gap between the two sets of data points of about 25 dB (at 1000 Hz). This is most likely an
indication of a conduction hearing problem, the origin of which is in the middle or outer ear.

0
–10
Hearing loss in dB

–20
–30
–40
–50
–60
–70
–80
100 1000 10 000
Frequency / Hz

Physics for the IB Diploma


139

Medical imaging
Definitions
PET scanning (positron emission tomography) A positron-emitting radioisotope is injected into
the patient. The positron produces two photons when it collides with an electron in the patient. The
two photons move in opposite directions and can be used to locate the point of emission. By using a
radiopharmaceutical that can accumulate in a particular organ, the function of that organ may be monitored.
X-rays Short wavelength (10−10 m) electromagnetic radiation.
Attenuation The reduction in the intensity of the X-rays transmitted due to absorption and/or spreading
of the X-ray beam.
Half-value thickness The distance after which the intensity of the transmitted X-rays is reduced to
half the original intensity. This denoted by x1/2.
Attenuation coefficient The probability per unit length that a particular X-ray photon will be absorbed.
This denoted by μ.
Transmitted intensity X-rays of intensity I0 are incident on a medium. After travelling a distance x in
the medium the intensity of the X-rays is given by I = I0e−μx.

Relation between half-value thickness and attenuation coefficient


I0 I
When x = x1/2, I = and so substituting in I = I0e−µx we find 0 = I0e−μx1/2 and so 1 = e−μx1/2 ⇒ ln 2 = μx1/2.
2 2 2

1
You must be able to derive this relation.

Choice of energy for X-ray imaging


The attenuation coefficients, in general, depend on X-ray photon energy. The choice of energy is dictated by,
for example, having the attenuation coefficients for soft tissue and bone to be as different as possible. In this
way, a contrast in the images of the bone and the tissue is achieved.

Test yourself 4
The attenuation coefficient for tissue at a particular energy is 0.52 mm−1. Calculate the fraction of X-ray
intensity that is transmitted through 1.2 mm of soft tissue.

Test yourself 5
Two sources of attenuation of X-rays are the photoelectric effect and Compton scattering. The attenuation
coefficient for the photoelectric effect depends on the atomic number Z of a sample through μ ∝ Z3 and for
Compton scattering μ is independent of Z. Suggest whether the photoelectric effect or Compton scattering
is more useful for medical imaging with X-rays.

OPTION I: Medical physics – HL


140

X-ray imaging and Computed Tomography (CT) source of X-rays

Sharpness of image
The image can be made sharper by having a source of X-rays that is as point-like as
possible. The image is also made sharper by preventing stray X-rays scattering through
tissue and bone from reaching the photographic film. This is achieved by having metal patient
strips in between the patient and the film that are oriented along the direction of the
incident X-ray beam. These block scattered X-rays.

Barium meal
In situations where there is no substantial difference between the attenuation coefficients
of different parts of the body, a contrast may be achieved with a barium meal. The patient film
swallows a quantity of barium, which absorbs X-rays more strongly than the tissue
surrounding the intestinal tract.

Intensifying screens patient


X-rays need considerably longer times to expose photographic film than visible light and
this means that the exposure of the patient to X-rays can be long. To reduce this, intensifying
front intensifying screen
screens are used: the X-rays incident on the screens cause visible light to be emitted and
this light can then be used to expose photographic film. double-sided film

back intensifying screen

metal shield

Computed Tomography (CT)


In CT, X-rays are directed at the patient through a horizontal plane and the transmitted radiation is detected
on the opposite side. Each horizontal ‘slice’ is divided up into a large number of pixels and a computer
reconstructs the amount of radiation absorbed in each pixel. In this way an image of the array of
slice is constructed. The procedure is repeated for other slices of the body so that a three- detectors

dimensional image is obtained. A computer can then rotate the image so it can be seen
source
from various angles. of X-rays

slice divided
A CT image is thus superior to the plain two-dimensional images obtained with ordinary
into pixels
X-ray imaging techniques and also produces images much faster (which can be critical in
the case of an accident).

Test yourself 6
The graph shows the variation of the linear absorption coefficient μ
of soft tissue with X-ray photon energy E. a Define linear absorption
coefficient μ. b To obtain an X-ray image in soft tissue, X-rays of energy 150
50 keV are being used. Use the graph to state and explain whether any
significant change will occur to the quality of the image if low-energy
X-rays are filtered out. c Calculate the fraction of the incident intensity 100
that is transmitted through 2.2 mm of soft tissue for X-rays of energy
50 keV.
50

0 E / keV
0 20 40 60 80

Physics for the IB Diploma


141

Ultrasound
Ultrasound is sound of frequency higher than the 20 kHz limit of the human ear.
Typically, ultrasound for medical uses has a frequency in the
MHz region.
piezoelectric
Ultrasound is produced by crystals that are subjected to an coaxial crystal
alternating voltage that forces the crystal to vibrate and cable

emit ultrasound in a phenomenon known as piezoelectricity.

Resolution
Definitions
Impedance matching In using ultrasound a gel-like substance is placed on the patient’s skin between
the skin and the probe. The gel has an impedance close to that of tissue and so most of the ultrasound gets
transmitted into the body rather than being reflected. The ultrasound that enters the body gets reflected off
organs and can also exit the body so it can be picked up by a detector.

1
It is important to point out the need for gel for ultrasound both entering and exiting the body.

A-scan (Amplitude modulated) An A-scan is a map of the intensity of the reflected ultrasound signal
from the skin and various organs inside the body.
An ultrasound pulse is directed at the body by
placing a transducer (a probe) on the skin. There
Signal strength

are reflected pulses from various interfaces in the


body. In the diagram, the first pulse is reflection
from the skin. The next two are from the front
and the back surface of an organ. The last is from
bones in the skeleton. The diagram is actually a Time
graph of the strength of the reflected signal versus transducer
time. The fact the signal strength decreases is a
sign of attenuation (absorption of energy by the body
surface
body). (The last signal is large because there is little organ
attenuation by the bones.) skeleton

B-scan (Brightness modulated) In the A-scan above, the signal strength may be converted to a dot
whose brightness is proportional to the signal strength. We now imagine a series of transducers along an
area of the body.
Putting together the images (as dots) of each
transducer forms a two-dimensional image of image of
the surfaces that cause reflection of the ultrasound reflecting
surface
pulses. This creates a B-scan.

Test yourself 7
Explain why in ultrasound imaging pulses rather than continuous waves of ultrasound are emitted by
the transducer.

OPTION I: Medical physics – HL


142

NMR and lasers


Nuclear magnetic resonance imaging or MRI
In this imaging technique, the patient is not exposed to any harmful radiation, which is a big advantage
of nuclear magnetic resonance imaging (MRI) over CT scanning. Other advantages include obtaining
high-quality images without contrast agents and the ability to image any cross-section of the body. A
disadvantage is the high cost of installation.
The method is based on the fact that protons have a property called spin. The proton’s spin will align parallel
or anti-parallel to a magnetic field and the energy of the proton will depend on whether its spin is up (i.e.
parallel to the magnetic field) or down (opposite to the field). The state with spin up has a lower energy
than that of spin down. The difference in energy depends on the magnetic field strength.

Uniform magnetic field separates spin up from spin down states spin down
The patient is placed in an enclosure that creates a very uniform magnetic field
B=0 B≠0 energy
throughout the body. A source of radio frequency forces protons with spin up to make difference
a transition to a state with spin down. As soon as this happens the protons will make a spin up
transition back down to the spin up state, emitting a photon in the process.

RF receiving coil

non-uniform
magnetic field

RF transmitting coil

Non-uniform field required


The idea is to detect these photons and correlate them with the point from which they were emitted.
This is done by exposing the patient to an additional non-uniform magnetic field. Since the difference in
energy for spin up and down states depends on the magnetic field strength, only those protons in regions
where the magnetic field has the ‘right’ value will be absorbed and so it is possible to determine where these
photons have been emitted from.

Lasers in medicine
Pulse oximetry
This technique measures the amount of oxygen that is absorbed in the haemoglobin of blood.
A source of laser light at two different wavelengths is placed at the finger or ear lobe of the patient (thin
parts of the body so the light can be received on the other side). The transmitted light is detected. The
amount of absorption at the two wavelengths chosen is different for blood with lots of oxygen so the ratio of
absorption gives a measure of the oxygen in the blood.

The laser as a scalpel


A laser beam can be made very thin and so when it is focused on a tiny spot a large intensity of light is
achieved. This can be used to vaporise tissue.
The advantages over an ordinary scalpel are that there is less bleeding and less damage to nerve cells. This
results in less pain to the patient during the recovery period after an operation.

Endoscopy
The laser can be directed to the required spot via a thin tube that can be inserted into the patient through
the mouth or an artery. The patient no longer has to be opened up for the operation. The surgeon monitors
the procedure via an endoscope, an optical fibre through which the laser light is transmitted.

Physics for the IB Diploma


143

Radiation in medicine
Definitions
Physical half-life The time for the activity of the radioisotope in the body to be reduced by half through
the physical process of radioactive decay as discussed in Topic 7. This is denoted by TP.
Biological half-life The time for the activity of the radioisotope in the body to be reduced by half through
biological processes such as sweating, urinating, etc. This is denoted by TB.
Effective half-life The time for the activity of the radioisotope in the body to be reduced by half through
both physical and biological processes. This is denoted by TE and it is related to the physical and biological
half-lives through the equation 1 = 1 + 1 . (This implies λE = λP + λB)
TE TP TP
E
Absorbed dose The energy absorbed per unit mass of material: D = . It is measured in joules per
m
kilogram and this unit is called the gray, Gy.
Quality factor (relative biological effectiveness) A numerical factor that is a measure of the relative
damage done by different radiations of the same energy.
Dose equivalent The energy absorbed per unit mass of material multiplied by the ! The sievert and the gray are both
QE
quality factor for the radiation involved: H = QD = . It is measured in joule per
m joules per kilogram, but are different!
kilogram and this unit is called the sievert, Sv.
Exposure The amount of positive charge per unit mass, created as a
q
! Exposure is a technical term – it does not mean
result of ionisation: E = . It is measured in coulombs per kilogram, C kg−1.
m the time that you are exposed to radiation!
Balanced risk A patient who exposes himself to radiation for either
diagnostic purposes (teeth X-rays, broken bone X-rays, CT scan, etc.) or therapeutic purposes (cancer
radiation treatments) faces a risk. The patient must weigh this risk against the possibly much more
dangerous consequences of what might happen if this risk is not taken.
Protection from radiation
The general rules are:
• keep the exposure time to radiation as short as possible
• keep the absorbed dose as little as possible
• stay away from radiation sources as far as possible
• use shielding as much as possible.

Test yourself 8
A patient is injected with a gamma ray emitter. The radiation from the source creates an exposure in
the body of 6.9 × 10−3 C kg−1. The average energy required to singly ionise an atom in the human body is
approximately 40 eV and the quality factor for gamma radiation is 1. Calculate the dose equivalent received
by the patient.

Test yourself 9
A patient of mass 70 kg is injected with a quantity of technetium for diagnostic purposes. The average
activity of technetium during the five hours it remains in the body of the patient is 380 MBq. Technetium
decays by gamma photon emission. The energy of each of the photons emitted is 140 keV.
a Explain why, for diagnostic purposes, radioisotopes which are gamma emitters are preferable to alpha or
beta emitters. b Calculate the dose equivalent received by the patient.

Test yourself 10
An isotope has a physical half-life of 2 days and a biological half-life of 4 days. Calculate the activity 4 days
later as a fraction of the initial activity.

OPTION I: Medical physics – HL


144

Radiation therapy for cancer


Definition
Radiopharmaceutical targeting A chemical compound that can be used to carry a radioactive isotope to
the precise location of the tumour.

Radiation can be used for diagnostic purposes but also to cure cancer. Cancerous cells are more vulnerable
to radiation, especially when they are dividing. Also, the rate of repair of cancerous cells is lower than that of
healthy cells.
The idea is to direct a beam of X-rays or gamma rays at a tumour and destroy it. The difficulty is that healthy
cells are also exposed to radiation that may damage them. This is avoided with fine beams that enter the
patient from different directions and overlap at the position of the tumour. In this way healthy cells receive
less radiation than those in a tumour.
If possible, the tumour may be injected with alpha or beta emitters, destroying it from within.
A common isotope used for treatment is iodine-131 (a gamma ray emitter). It is used mainly for problems
with the thyroid gland. The thyroid needs iodine to produce the hormone thyroxine. Little iodine is found
naturally in the body so radioactive iodine injected in the body will collect at the thyroid gland. This isotope
can destroy cancerous thyroid gland cells or, in lesser quantities, reduce the activity of the gland.

Comparing diagnostic to therapeutic uses


Diagnostic Therapeutic
Generally, we require short half-life isotopes For therapeutic purposes X-rays and gamma rays are
for diagnosis to minimise the damage done to used.
the patient.
We need gamma emitters so that the rays can If isotopes are used to produce the gamma rays, we need
be detected outside the body without being longer half-life isotopes that can sustain a high activity
absorbed. within the body so that cancerous cells will be destroyed.
Commonly used isotopes include the gamma Alpha and beta emitters may also used (within the
emitters technetium-99, cobalt-60, iodine-123 tumour) as well as gamma rays (from outside).
and iodine-131.

Test yourself 11
A volume of 10 cm3 of albumen containing a sample of technetium-99 is injected into the bloodstream of
a patient. A 5.0 cm3 sample taken from the blood of the patient some time later has an activity of 120 kBq.
Another 10 cm3 of albumen is mixed with 5.0 × 103 cm3 of water. A volume of 5.0 cm3 of this mixture has an
activity of 125 kBq. Estimate the volume of blood in the patient.

Physics for the IB Diploma


OPTION J: Particle physics – SL Option D and HL

The standard model


The currently accepted model of particle interactions is called the standard model. The model assumes that
the elementary particles, i.e. the particles that are not made out of smaller constituents, belong to three
different classes. They are the quarks, the leptons and the exchange particles. The exchange particles are
associated with the four fundamental interactions (forces) of nature and they will be discussed separately
later on. In addition, there is also the Higgs particle, which will be discussed separately later on in the AHL
material.

Quarks – SL Option D and HL


Definitions
Quarks Elementary particles which combine to form a class of particles called hadrons. Quarks combine
in two ways.
Hadron A particle made of quarks. There are two kinds of hadrons:
baryons and mesons.
Baryon A type of hadron consisting of three quarks. Protons and
neutrons are typical baryons: proton = uud, neutron = ddu.
baryon meson
Meson A type of hadron made of one quark and one antiquark.
hadrons
Colour Quarks have a fundamental property called colour. There are
three colours for quarks: red, green and blue. (These have nothing to red antired
do with ordinary colour!) The colour of an antiquark may be described
as antired, antiblue and antigreen.
blue antiblue
In this book we will denote antiquarks with circles with a line through.

green antigreen
Confinement
quarks antiquarks
Quarks cannot be observed as isolated free particles and so colour
cannot be observed directly. The hadrons that quarks form always
appear as combinations with no colour. For example, a proton
consists of 2u quarks and 1d quark. The colour quantum numbers
of the three quarks cannot be anything other than the colourless
combination R(ed)G(reen)B(lue). We cannot have a proton whose
quarks have colours, e.g. RRG or BBB. Similarly, the quarks in the
meson π+ = ud must have colours that are, e.g. RR, but never RG or BR.

Will energy liberate a quark? No, the supplied energy would increase the separation of the
If enough energy is supplied to quarks but to increase it any further would require too much energy.
a hadron, won’t it be possible to Instead, a quark–antiquark pair is created out of the vacuum.
remove a quark and so observe
energy
colour?

This is like breaking a bar magnet hoping to isolate a magnetic


pole. Instead you will only succeed in creating two magnets!

OPTION J: Particle physics – SL Option D and HL


146

Quantum numbers – SL Option D and HL


Quantum numbers are numbers (or properties) used to characterise particles. They include charge, baryon
number, spin, strangeness, lepton number and colour.

Definitions
Charge, Q We measure charge in units of e (the charge of the proton). Thus, a proton has quantum charge
number Q = +1 and the neutron has Q = 0. The u quark has Q = + 2 and the d quark Q = − 1 .
3 3
Baryon number, B All baryons are assigned a baryon number B of +1. Thus the proton and the neutron
both have B = +1. The meson π+ = ud has B = 0 because it is not a baryon.
Spin A property of particles that is similar, but not identical, to the notion of a ball spinning around
its axis.
h h
The spin of particles is measured in terms of . We call this combination h = (read ‘h bar’).
2π 2π
Particles have a spin that is one of these two options:

⎧ nh bosons, (exchange particles, mesons, Higgs)



⎨ 1
⎪ (n + )h fermions (electrons, neutrinos, baryons)
⎩ 2
where n is an integer.

Baryons are made out of three quarks and so their spin can =3
2
be 3 × h (all three spin up) or 1 × h (two spin up and one
2 2
spin down).
=1
2

=1
Mesons are made out of a quark and an antiquark and so their
spin can be 1 × h (both spin up) or 0 (one spin up and one spin
down).
=0

Strangeness, S A quantum number that applies only to hadrons. For every strange quark in a hadron we
assign a strangeness quantum number of −1. For every antistrange quark we assign a strangeness of S = +1.
Thus π+ = ud has S = 0, Σ+ = uus has S = −1 and Ξ+ = dds has S = +1.
Lepton number, L A quantum number that applies to leptons only. Each lepton is assigned a lepton
number of +1. Thus the electron and the neutrino both have L = +1.
Note: for Higher Level you will need to know more about lepton number. See HL material on page 153.

Antiparticles To every particle there corresponds an antiparticle of the same mass as


the particle but with opposite electric charge (and opposite any other quantum number).
! Particles that are their own
But some particles are their own antiparticle, e.g. the photon and the graviton. antiparticles are therefore
necessarily electrically neutral.
Conservation laws In interactions between particles, various quantum numbers are
conserved i.e. they have the same value before and after the interaction. The quantum numbers
electric charge, baryon number, lepton number and colour are always conserved in all interactions 1
in addition to energy and momentum. An important exception is strangeness that is conserved in the This is very important
electromagnetic and strong interactions but not in the weak interaction. for examinations.

Test yourself 1
State and explain whether the neutral K meson, K0 = ds, can be its own antiparticle.

Physics for the IB Diploma


147

The Pauli and Heisenberg principles – SL Option D and HL


Definitions
The Pauli principle It is impossible for two identical fermions (particles with half integral spin) to
occupy the same quantum state.
The quantum property colour was introduced because of the baryon with spin 3 h consisting of three
2
identical u quarks in the same quantum state. This would violate the Pauli principle. To save the situation,
colour was introduced to distinguish the three, otherwise identical, u quarks.

The Heisenberg uncertainty principle for time and energy


h
This principle is expressed in the equation ΔEΔt ≥ . In an interaction the total energy after the interaction

may be larger than the energy before by an amount ΔE, i.e. energy conservation is violated(!), provided the
h
process does not last longer than a time interval Δt given by Δt ≈ . In other words, energy conservation
4πΔE
may be violated provided the time it takes for that to happen is not too long.

The vacuum in quantum physics


In classical physics the term vacuum applies to space in which there is no matter or
radiation or energy. But in quantum theory the ‘vacuum’ is a completely different thing.
An electron that enters a region that is empty of other matter and energy (the classical vacuum) will be
involved in energy-violating processes lasting for very short times. These processes involve emitting and
reabsorbing photons.

Interactions – SL Option D and HL


There are three fundamental interactions in nature, in addition to gravitation:

Interaction electromagnetic weak strong


Relative strength (at low −2 −6
10 10 1
energies) (HL only)
Exchange particle(s) photon Z0, W± gluons
Basic Feynman diagram
photon
for interaction

W boson Z boson gluon

time f1 f2 f f quark quark

The solid lines represent The solid lines represent leptons or quarks.
charged particles.

1
The weak and strong interactions have many other interaction diagrams but in an exam these will be given if necessary.

Test yourself 2
The reactions below do not take place because they violate one or more conservation laws. Which ones?
a p → e− + γ b p → π− + π+ c n → p + e− d e− + e+ → γ e e+ → μ+ + νμ f p → n + e+ + νe

Test yourself 3
The Σ+ = uus decays into a neutron and a positive pion (π+ = ud): Σ+ → n + π+. a State and explain whether the interaction
involved is strong, weak or electromagnetic. b Draw a Feynman diagram for this process. (See page 148 if you are still
unsure about Feynman diagrams.)
OPTION J: Particle physics – SL Option D and HL
148

Feynman diagrams – SL Option D and HL


Feynman introduced a pictorial way of viewing particle interactions. He noticed that every conceivable
interaction in electromagnetism can be constructed out of just one basic interaction vertex, shown here.

The first diagram says that an electron (solid line) emits a photon (wavy line). The electron changes
direction slightly as a result of this emission.

time

The second diagram shows what happens when two such interaction vertices are put together.
This is interpreted as two electrons exchanging a photon. Both electrons change momentum as a result
of this exchange. But the change of momentum of the two electrons is classically explained by saying that
there is force between them. Feynman interprets this ‘force’ to be just the exchange of the photon. time

The third diagram shows another way of drawing the basic interaction vertex.
This is interpreted as an electron absorbing a photon.

time

Feynman realised that he could represent antiparticles by lines with arrows pointing opposite to the
direction of time.

This diagram shows a positron emitting a photon: This diagram represents a positron absorbing a
photon:

time time

By drawing the vertex as in the last diagram we have the interpretation of a


collision between an electron and a positron into a photon. This is called
pair annihilation.
time

Finally, putting two copies of the last diagram together we get a fascinating possibility. It says electron particle
that an electron can collide with a positron and produce another electron–positron pair.
But notice that we do not necessarily have to have an electron and a positron in the final
state. Any quark or lepton pair with electric charge will do, for example a u quark and a u
antiquark, or a c quark and an a antiquark, or a muon and an antimuon.

positron antiparticle
Test yourself 4
A neutral meson consisting of a charmed and an anticharmed quark decays into two photons.
Construct a Feynman diagram for the process.

Test yourself 5
Construct a Feynman diagram for the process e− + e+ → e− + e+ + e− + e+.

Test yourself 6
Use one of the basic interaction vertices for the weak interaction to draw a Feynman diagram
for the decay of a neutron into a proton by beta decay.

Physics for the IB Diploma


149

Virtual particles and gluons – SL Option D and HL


Definition
Virtual particles These appear in intermediate states in Feynman electron electron
diagrams, are unobservable and temporarily violate energy
conservation. virtual photon

The Feynman diagram shows two electrons exchanging a photon.


electron electron
The photon is said to be virtual.
When the electron emits the photon, the law of conservation of
energy is actually violated. It cannot take place unless the photon
h
that is emitted is very quickly (i.e. within a time interval Δt ≈ )
4πΔE
absorbed by the other electron so that the energy violation (and the
photon itself) becomes undetectable.
The second diagram shows two particles exchanging a virtual
h
particle of mass m. The range of the interaction is given by R ≈ .
4πmc
virtual particle
When the particles are further apart than R, the interaction between R of mass m
them is negligible.
Thus the electromagnetic interaction (which involves the exchange of
the massless photon) has an infinite range.

The weak interaction that involves the exchange of (the very) massive W and Z bosons will have a short,
finite range. Gluons are special.

Colour for gluons


There are eight gluons. Each carries one colour and one anticolour quantum number. There are six gluons
with colour quantum numbers BR, RB, BG, GB, RG and GR. The other two have colour quantum numbers
that need not concern us further.
Colour is conserved: at any one interaction vertex colour is conserved, which means that the net colour
entering a vertex equals the net colour leaving.
In the first diagram, red enters; antiblue and blue In the second diagram, red and
cancel leaving red as the net colour leaving the vertex. antigreen enter and the same leave.
red antiblue red
antigreen
red
red blue

antigreen

Test yourself 7
The mass of the W boson is about 80 GeV c−2. Estimate the range of the weak interaction.

Test yourself 8
The strong interaction also has a triple gluon vertex. If a red antiblue gluon joins red antiblue
a green antired gluon, what are the colour numbers of the resulting gluon?
?
Test yourself 9 green antired
A green strange quark emits a gluon and becomes a red quark. State a the flavour
(i.e. quark type) of the red quark and b the colours of the gluon.

OPTION J: Particle physics – SL Option D and HL


150

Particle accelerators and detectors – HL


The cyclotron
Two hollow electrodes (called ‘D’s) are placed with a gap between them
N in a uniform magnetic field.
D1
A source of alternating potential difference is established between the
two Ds (here labelled D1 and D2).
A particle placed at the centre will follow a semi-circular path until it
uniform
D2 magnetic gets to the gap between the Ds. There it faces a potential difference
field that accelerates it so that it follows a semi-circular path of larger radius
S
in the opposite D.
Plan view
The potential difference between the Ds is such that a positively
charged particle always sees a negative potential across the gap just
D1
as it arrives there. This means that the frequency of the alternating
potential difference must be the same as the frequency of revolution of
the particles. (This is explained below).

D2

2
The magnetic force on a particle of charge q travelling with the velocity v is F = qvB and so qvB = m vr
mv
⇒r= , where m is the mass of the particle. The time to complete one revolution (the period) is found by
qB
m 2πr
using v = 2πr. Substituting this value of v in the formula above gives r = ⇒ T = 2πm . So the period
T qB T qB
of revolution is independent of the speed. This means that despite the fact that the particle is accelerating,
the period is the same and only depends on the mass and charge of the particle and the magnetic field. The
potential difference between the Ds must then change direction every half a period. Thus, the period of the
alternating voltage source is the same as the period of revolution of the particle, i.e. 2πm. This is called the
qB
cyclotron period and its inverse, qB , is called the cyclotron frequency. The charged particle is therefore
2πm
accelerated as it spirals in the region between the poles of the magnet. At some point additional magnetic
fields placed at the edge of the magnetic field region will pull it out and direct it at a target, with which it
will collide.
Just as the particle exits the cyclotron it is moving on a circle of radius R, the radius of the cyclotron itself,
mvmax
with the maximum speed it can attain, vmax. Thus, R = ⇒ vmax = qBR and so the maximum kinetic
2 2 2
qB m
energy is Kmax = 1 mv2max = q B R .
2 2m

Advantages of cyclotron Disadvantages of cyclotron


• cheap, small, compact, ideal • for fixed-target experiments
for medical research only
• limited energy due to
limitations of magnet size

Test yourself 10
A cyclotron has a radius of 0.25 m and uses a magnetic field of strength 1.4 T. It accelerates protons.
a Calculate the frequency with which the protons spiral in the cyclotron. b What is the kinetic energy of the
protons as they leave the cyclotron?

Physics for the IB Diploma


151

The linear accelerator (linac) – HL

+ +
electrons
– –

In a linac, the acceleration takes place in between the cylindrical electrodes. Electrons, for example, face a
positive potential at the next electrode every time they reach the gap. The electrodes must get longer as the
speed increases since the particles can then cover a longer distance in the same time.

Advantages of linac Disadvantages of linac


• relatively ‘simple’ machines • need a very long linac to achieve high energies
• synchrotron radiation is limited • cannot alter the collision time once experiment starts

The synchrotron
In a synchrotron, particles follow circular paths
of fixed radius. This means the magnetic fields acceleration
must get stronger as the speed of the particles takes place
increases. Particles travel in bundles and another here

set of particles or antiparticles is made to move in


the opposite direction. At the collision points, the
bundles smash into each other.
electromagnet
Particles are accelerated by electric fields in the
radio frequency cavities in between the gaps in
the magnets. ring
The Large Hadron Collider (LHC) at CERN
accelerates protons to an energy of 7 TeV. When
these collide with another beam of protons also at 7 TeV the available energy is 14 TeV, corresponding
to a temperature of about 1016 K (see page 155). This is the temperature the Universe had 10−9 s after the
Big Bang.
It is hoped that the LHC will discover the Higgs particle as well as supersymmetric particles predicted by
string theories.

Advantages of Disadvantages of synchrotron


synchrotron
• very high • complex machines
energies can • a very large proportion
be reached of the energy is lost to
• collisions are synchrotron radiation
controlled • low probability of collisions

OPTION J: Particle physics – SL Option D and HL


152

Detectors – HL
The photomultiplier

400 V 200 V Radiation produced by particles incident


on a metallic surface creates a small
light current (electron emission). The current
is made larger by a series of dynodes of
dynodes increasing potential until it is large enough
to be measured. The measured current is
500 V 300 V 100 V
proportional to the intensity of the radiation.

The bubble chamber


piston The temperature at which a liquid boils depends on
pressure. In a bubble chamber a liquid is kept at a
particle
path
temperature just below its boiling point. The pressure
is then reduced and the liquid just begins to boil. A
charged particle moving through the liquid collides with
magnet liquid molecules and creates ions along its path. Bubbles
in the liquid will form along the path.

superheated liquid
A photograph thus reveals the path of the particle. (The
pressure is immediately increased to prevent total boiling
of the liquid.)
! There is a dead time between taking Magnets bend the path of the particle and measurement
one photograph and the next. The of the radius of the path gives information on the
analysis of the photographs is very momentum of the particle.
tedious and time consuming.

The (proportional) wire chamber


wires at A charged particle will ionise a gas through which
high
it passes. In the proportional wire chamber, a
voltage
high potential difference is kept between wires
in a fine mesh immersed in a gas. The ions and
electrons produced by a charged particle travelling
through the gas will drift towards the nearest
ions wire, where their arrival time can be recorded with
great accuracy because their speed is accurately
known. A series of many meshes at various angles
particle path
to each other can then reconstruct the path of the
particle.

! The great advantage of the proportional wire chamber is that no photographs need to be
taken as the data is digitised and can be analysed by computers.

Physics for the IB Diploma


153

Available energy – HL
According to relativity the total energy E of a particle of rest mass m consists of the rest energy and the
kinetic energy: E = mc2 + EK.

Centre of mass collisions


The particles approach each other with equal and opposite momentum.
Each has a total energy E. The total momentum is zero.

The total energy before collision is 2E. All of this energy is available to produce new particles. If the collision
E
produces a particle–antiparticle pair, the largest mass the particle can have is given by 2E = 2Mc2 ⇒ M = 2
c
This happens when the pair is produced at rest. We have no kinetic energy and we just produce the rest
energies of the pair. This is possible because the initial momentum before the collision is zero. Producing the
pair at rest also has zero momentum.

Stationary target collisions


Here one particle is a stationary target. The total energy of the incoming m M
particle is E. The total momentum is non-zero in the lab.
m = mass of incoming particle
M = mass of target particle
The point here is that, unlike above, not all of the energy E can be used to produce the rest energy of new
particles. This is because we have non-zero momentum before the collision and so we must have non-zero
momentum after. This means that some energy will go towards the kinetic energy of the produced particles
leaving less energy for the rest energy of the new particles.
To just produce new particles, the total energy E of the incoming particle must satisfy EA2 = 2Mc2E + (Mc2)2
+ (mc2)2, where EA (called the available energy) is the sum of the rest energies of the produced particles.

Test yourself 11
An electron of total energy E collides with an electron at rest. As a result of the collision three electrons and
one positron are produced. a Draw a Feynman diagram for this process. b Calculate the minimum kinetic
energy for this to happen. (Rest mass of electron = 0.511 MeV c−2.)

Test yourself 12
A pion of total energy E collides with a proton at rest according to the reaction π− + p → Σ0 + K0. Calculate the
minimum E for this to happen. (Rest masses: pion 140 MeV c−2, proton 938 MeV c−2, sigma 1193 MeV c−2, kaon
498 MeV c−2.)

More on lepton number – HL


Leptons Le Lμ Lτ There is a separate lepton number defined for every generation of
leptons, as listed in the table. Generation lepton number is conserved.
e− +1 0 0
Anti-leptons have negative lepton number.
νe +1 0 0
µ− 0 +1 0 Test yourself 13
The reaction μ− → e− + γ does not occur because conservation laws are
νµ 0 +1 0
violated. a Which ones? b What is the correct reaction equation for the
τ− 0 0 +1 decay of a muon into an electron?
ντ 0 0 +1
Test yourself 14
A positive pion decays into an antimuon and a neutrino: π+ → μ+ + ν.
What is the type of the neutrino produced?
OPTION J: Particle physics – SL Option D and HL
154

The experimental evidence for the standard model – HL


The first diagram shows a low-energy particle (e.g. a photon)
directed at a proton. The photon will just ‘see’ a solid proton
volume – it will not be able to probe inside the proton.
Scattering takes place from the entire proton. No quarks
are seen.

The second diagram shows a high-energy particle directed at


a proton. This will be able to probe inside the proton and see
individual constituents in the proton – the quarks.
Scattering takes place from individual quarks.

Deep inelastic scattering experiments


These are experiments in which a large amount of energy and momentum are transferred to a nucleon.

Results of deep inelastic scattering experiments Further evidence for the standard model
• Quarks loosely bound to each other at high • Discovery of the W and Z bosons
energies – evidence for asymptotic freedom • Processes mediated by a Z boson are said to be
• Existence of three types of colour neutral current processes. These are predicted
• Existence of neutral constituents inside only by the standard model, so their discovery
nucleons – evidence for gluons provided strong evidence for the model.

Asymptotic freedom
Quarks in a proton are very strongly bound to each other, hence the
name ‘strong interaction’. However, when a proton is probed by a
virtual gluons particle that transfers to the proton large energy and momentum,
the quarks inside the proton appear as if they are almost free. This
X Y
paradoxical situation is called asymptotic freedom.
quark
The origin of asymptotic freedom is the fact that the interaction
strength of the colour force is a function of the energy.

The Higgs particle


The standard model requires the existence of just one more particle in addition to the quarks, leptons
and exchange particles we have discussed so far, the Higgs particle. This may be elementary but could
conceivably also be composite (of unknown constituents). It is expected that use of the LHC at CERN
will answer these questions.

The standard model is a mathematical theory based on symmetry. The symmetry of the theory
requires that the particles of the model (quarks, leptons and exchange particles) be massless. This is fine
for the photon (the electromagnetic interaction has infinite range) but not for the exchange particles
of the weak interaction. They must be massive. The Higgs particle achieves the trick of giving masses
to some of the particles through their interactions with the Higgs, but at the same time preserving the
symmetry of the theory to a sufficient degree for the theory to work.

Physics for the IB Diploma


155

Applications of particle physics to cosmology – HL


The Boltzmann equation
One of the biggest discoveries of 19th-century The Boltzmann constant is k = 1.38 × 10−23 J K−1.
physics has been the connection between the
Along with the speed of light c, Planck’s constant
average kinetic energy of molecules, EK, and the
h and Newton’s constant of gravitation G, the
absolute (i.e. in degrees kelvin) temperature T:
Boltzmann constant is truly one of the fundamental
EK = 3 kT where k stands for a new constant of ‘numbers’ of physics.
2
physics, the Boltzmann constant.

The early universe was very hot


Shortly after the Big Bang, the temperature The temperature today as measured through the cosmic
of the universe was enormous. Going back microwave background radiation is only 2.7 K.
to a time of 10−43 s after the Big Bang, the Boltzmann’s equation, EK = 3 kT, is of fundamental
temperature was of order 1032 K. (This time 2
importance in studies of cosmology and the early
is perhaps the earliest we can extrapolate
universe since the equation sets the order of magnitude
backwards.)
of the energy that was available at any given temperature
as the universe cooled down as it expanded.

Because we frequently use the formula 3 kT = E to find the temperature corresponding to an amount
2
of energy E, and vice versa, it is useful to remember that a temperature of 1010 K is equivalent to
approximately 1 MeV.
3 kT = 1 MeV
2
2 × 106 × 1.6 × 10−19
T= K ≈ 1010 K
3 ×1.38 ×10−23
1010 K ⇔ 1 MeV

The use of EK = 3 kT gives only rough estimates. At any given temperature the equation gives just the
2
average energy. The particles have a range of energies and so there are very energetic particles even at
lower temperatures.

Matter and antimatter


The very early universe contained almost equal numbers of particles
and antiparticles. But today we see matter and not antimatter.

Theory predicts that in the very early universe there was one extra particle for every 109 particle–antiparticle
pairs. A (virtual) photon can produce an electron–positron pair out of the vacuum if its energy is at least the
rest energy of each particle (plus any kinetic energy they may have). Therefore the least amount of energy
2 × 106 × 1.6 × 10−19
that be supplied is 2mec2 = (2 × 0.511 MeV c−2)c2 ≈ 1 MeV. Using 3 kT = 1 MeV ⇒ T = K ≈ 1010 K.
2 3 ×1.38 ×10−23
So, at temperatures of 1010 K and higher, photons could produce electron–positron pairs. The reverse process is
always possible regardless of temperature. That is to say, electron–positron collisions produce photons at any
temperature. This implies that as the temperature fell below 1010 K, the production of pairs became impossible
(because there was not enough available energy) but the annihilation continued. Since there was a slightly
higher number of particles than antiparticles the matter that is left today is indeed matter and not antimatter.

Test yourself 15
The nucleus of helium-4 has a binding energy of about Before you answer
28 MeV. Calculate the temperature at which thermal A quick answer is: since 1 MeV ⇔ 1010 K,
motion would break the nucleus apart into its constituents. 28 MeV ⇔ 2.8 × 1011 K.

OPTION J: Particle physics – SL Option D and HL


156

String theories – HL
These theories claim that the fundamental building blocks of matter are not point, elementary particles but
tiny strings. The length of the strings is assumed to be very small (less than 10−35 m). The strings could be
open (i.e. have two ends) or closed (i.e. form a loop).

The great promise of string theory was that it would provide, for the first time, a theory of quantum
gravitation.
In addition, all the properties of the elementary particles would be explained in terms of strings. The idea
was that the string would vibrate much like an ordinary string and ‘standing waves’ would be formed on the
string like the harmonics on ordinary strings. What we normally call particles would then be various special
modes of vibration of the string!
This would then be ‘the’ theory of the interactions in the universe. Unfortunately though, there are now very
many possible string theories and only experiment can decide which one might describe the real world (if
at all).

How are string theories so different from theories based on particles?


A particle traces out a line as it moves, whereas a Particles and strings interact differently:
closed string traces out a cylinder. interaction here is at a point

particle
string

here interaction is in a region


of space

Time

Interactions at a point are problematic because they give rise to infinite energies. For the electromagnetic,
weak and strong interactions, physicists were able to solve the problem of interactions at a point (and the
infinite energies they created) by a procedure called renormalisation. However, the same techniques failed
when applied to the gravitational interaction. It was realised that interactions at a point had to be avoided.
This could be done with strings.
But there is a very big price to pay by introducing strings!
String theories cannot be formulated in the ordinary four-dimensional world (three dimensions of space
and one of time) in which we appear to be living. Various versions of string theories require 10, 11 or 26
dimensions of space and time. So for a theory in 10 dimensions, the extra six dimensions are supposed
to be curled up into a compact, tiny space that is essentially unobservable.

Physics for the IB Diploma


Exam-style questions

Topic 1: Physics and physical 7 This question is about the


measurement oscillations of a cantilever.

1 The thermometers show two readings of the temperature The diagram shows a thin rod
M
of a liquid using a Celsius thermometer. clamped to a table and a mass M
attached to the rod at a distance L
from the base of the rod.
The mass is displaced sideways by a
–10 –5 0 5 10 15 20 25 30 35 40 small amount and is then released. L
A student measures the period of
oscillations for different values of
the mass M and a fixed value of the
–10 –5 0 5 10 15 20 25 30 35 40
length L.

Which of the following is the best estimate of the change in


temperature of the liquid? clamp
A 32.0 ± 1 °C B 32 ± 1 °C C 32.0 ± 0.5 °C D 32 ± 0.5 °C a i To measure the period the student times 10
oscillations and, to get the period, divides the
2 The voltage across a resistor was measured to be 898 mV answer by 10. Explain why this is preferable to
and the current through the resistor was measured to be timing just one oscillation. [1]
0.45 A. The best estimate for the resistance is ii The student repeats the procedure in i four times
A 2.0 Ω B 2Ω C 1996 Ω D 2000 Ω and gets the average of the four periods. Explain the
advantage of doing this. [1]
3 The volume of a cylinder of base radius R and height H is b The graph shows the plotted data obtained by the
given by V = πR2H. The percentage uncertainty in the radius student.
is 3% and the percentage uncertainty in the height is 4%.
T/s
What is the percentage uncertainty in the volume?
1.6
A 7% B 10% C 12% D 36%

4 A star has mass 1030 kg and it may be assumed that it 1.4


is made entirely out of hydrogen. What is the order of
magnitude of the number of electrons in the star?
1.2
A 1013 B 1027 C 1030 D 1057

5 The distance to a star is 1017 m. A spacecraft travelling at 1.0


c
where c is the speed of light will get to the star in a
100
time of
M/g
A 108 s B 1010 s C 1012 s D 1023 s 300 400 500 600 700

6 The length of rope required to go around the Earth along Explain why the data do not support the hypothesis
the equator is about 40 000 km. The additional length of that the period is proportional to the mass. [1]
rope required to go around the Earth at a vertical height of
1 m above the equator is about

A 6m B 60 m C 600 m D 6000 m

Exam-style questions
158

c The student decides to plot T2 against the mass, M. This 4 Four identical balls are D
results in the graph where the error bars for only the projected from a tower with
first and last data points are shown. the same speed but in different C
directions as shown. Which one
T 2 / s2 reaches the ground with the B
highest speed? (Assume no air A
2.5 resistance.)

5 The diagram shows two identical containers, X and Y,


2.0
connected by a very thin tube with a valve. The valve is
initially closed. Container X is filled with water of depth h
1.5 and mass m and container Y is empty. The valve is opened
until both containers have equal quantities of water in
them.
1.0 The gravitational potential energy lost by the water in this
process is
mgh mgh mgh
M/g A 0 B C D
300 400 500 600 700 8 4 2

X Y
i The uncertainty in the measurement of the period
is 0.02 s. Calculate the uncertainty in T2 for the data
point at M = 400 g. [2]
ii Copy the graph and draw the line of best fit for h
these data. [1]
iii Theory suggests that the relation between T (in
seconds), M (in grams) and the length L of the
rod (in metres) is T = 0.12 ML3 . Calculate the
length L of the rod including its uncertainty. [4]

Topic 2: Mechanics 6 a A ball is thrown vertically upwards from the edge of a


cliff with a speed of 20 m s−1. It hits the sea below 6.0 s
1 A body that started from rest moves on a straight line
later.
with constant acceleration. After travelling a distance d the
velocity becomes v. The distance travelled from when the
velocity is v until it becomes 2v is

A d B 2d C 3d D 4d

2 A ball is dropped from rest. A second ball is dropped from


rest from the same height as the first, but 1 s later. What
happens to the distance between the balls when both are
moving?

A stays the same B keeps increasing Take g = 10 m s−2.


C keeps decreasing D increases then stays constant Calculate
i the time it takes the ball to reach its highest
3 A rocket is fired vertically upwards. At the highest point it point. [2]
explodes. Which is a correct comparison of the momentum ii the maximum height reached by the ball above
and the kinetic energy of the fragments immediately after the the cliff. [2]
explosion compared to the rocket just before to the explosion? iii the velocity of the ball as it hits the sea. [2]
iv the height of the cliff above the sea. [2]
Momentum Kinetic energy
v the average velocity and average speed for the
A same same motion. [2]
B same different
b Sketch graphs showing the variation with time of i
C different same the velocity, ii the speed and iii the displacement. [3]
D different different

Physics for the IB Diploma


159

7 A ball of mass 0.20 kg falling vertically collides with the 10 A car of weight 1.2 × 104 N climbs up an incline at a
ground. Just before impact its speed is 4.0 m s−1. It rebounds constant speed of 12 m s−1. The incline makes an angle 4.0°
vertically with a speed of 2.5 m s−1. The ball was in contact to the horizontal. A constant frictional force f of magnitude
with the floor for 0.14 s. Calculate 600 N acts on the car in a direction opposite to the velocity.

a the magnitude and direction of the change in a Calculate the minimum power that the engine must
momentum of the ball. [2] develop. [3]

b the magnitude of the average force the ball exerted b The frictional force stays constant but the car now
on the ground. [2] accelerates from rest at 2.0 m s−2 up the incline. Calculate
the power developed after 5.0 s. [2]
8 A landing module of mass 250 kg descends towards the
surface of a planet. The velocity of the module at time zero 11 The force on a particle of mass 0.50 kg varies with time as
is −9.0 m s−1. At time zero the engine is fired for 4.5 s in shown in the graph. The initial velocity is zero.
order to slow down the module. The graph shows how the
F/N
acceleration of the module varies with time. The module
lands 5.0 s after the engine is fired. 25
a / m s–2 20
3 15

2 10
5
1
0 t/s
0 1 2 3 4 5
0 t/s
1 2 3 4 5 a Define impulse of a force. [1]
–1 b i Show that the impulse given to the particle in
5.0 s is approximately 100 N s. [2]
–2 ii Calculate the velocity of the particle after 5.0 s. [2]

Use the graph to calculate c Describe the motion of this particle. [2]

a i the velocity of the landing module at 4.5 s. [2] d Determine the average power delivered to the
ii the acceleration of free fall on the planet. [2] particle in 5.0 s. [2]
iii the force exerted by the engine at 1.0 s. [2] e Estimate, for this particle
iv the speed with which the landing module i the average acceleration. [2]
impacts the planet. [2] ii the distance travelled in 5.0 s. [2]
b The distance fallen by the landing module while the
engine was on is 25 m. Calculate the power delivered 12 A body of mass 12 kg moves on a
to the landing module by the engine. [2] horizontal circle of radius 25 m with
constant speed. It completes one full
revolution in 15 s. B
9 a State Newton’s second law in terms of momentum. [1]

b A fan on a cart pushes air to the left with speed v. a Explain how the body has
A
acceleration even though
the speed is constant. [2]

b Calculate
i the speed of the body. [1]
ii the net force on the body in magnitude and
direction. [2]

c For the body in position A, copy the diagram above and


The radius of the blades of the fan is R and the density draw arrows to show
of air is ρ. i the velocity [1]
ii the acceleration [1]
Show that the net force pushing the cart to the right is
F = ρπR2v2. Ignore any resistance forces on the cart. [3] d Calculate the average acceleration of the body, in
magnitude and direction, from position A to B. [3]
Exam-style questions
160

Topic 3: Thermal physics 6 This question is about thermal energy.

1 Two ideal gases, X and Y, are contained at constant The graph shows the variation with time of the speed of
temperature. The mass of the atoms of X is m and that of an object of mass 8.0 kg that has been dropped (from rest)
the atoms of Y is 2m. Which of the following is the correct from a certain height.
average kinetic energy of molecules of Y
value of the ratio average kinetic energy of molecules of X ? v / m s–1

A 1 B 2 C 4 D 16 15.0

2 Two bodies have the same temperature and they are in 12.5
contact. Which of the following is a correct statement? 10.0

A There is no flow of energy between the bodies. 7.5


B There is no net flow of energy between the bodies.
5.0
C The bodies must have the same internal energy.
D The bodies must have the same heat content. 2.5

0 t/s
3 A fixed quantity of an ideal gas is compressed at constant 0 2 4 6 8 10
temperature. The reason for the pressure increase is that
The body hits the ground 10 seconds later. The specific heat
A the molecules collide with each other more frequently. capacity of the object is 320 J kg−1 K−1.
B the duration of the collisions is shorter. Use the graph to
C the molecules collide with the walls more frequently.
D the molecules collide with the walls with a greater a i explain why there must be air resistance forces
impact speed. acting on the object. [2]
ii estimate the height from which the object was
4 Energy is provided to a liquid at a rate of P joules per dropped. [2]
second. The rate of increase of temperature with time is r. iii calculate the speed the object would have had if
The mass of the liquid is m. The specific heat capacity of the there were no air resistance forces. [2]
liquid is b Estimate the change in temperature of the body from
P Pr mr m the instant it was dropped to just before impact, listing
A mr B m C P D Pr
any assumptions you make. [4]
5 This question is about thermal contact.
7 This question is about calorimetry.
Two bodies of equal mass and different temperatures
and made of different materials are brought into thermal A piece of tungsten of mass 50 g is placed over a flame for
contact. some time. The metal is then quickly transferred to a well
insulated aluminium calorimeter of mass 120 g containing
a i State what is meant by thermal contact. [1] 300 g of water at 22 °C. After some time the temperature of
ii State what determines the direction of energy flow the water reaches a maximum value of 31 °C.
between the bodies. [1]
a Define specific heat capacity. [1]
b Discuss, for each body, how the following quantities are
related to each other: b Calculate the temperature of the flame. You may
i the change in internal energy [1] use these values of specific heat capacity: water
ii the change in temperature. [2] 4.2 × 103 J kg−1 K−1; tungsten 1.3 × 102 J kg−1 K−1; aluminium
9.1 × 102 J kg−1 K−1. [3]

c State and explain whether the actual flame temperature


is higher or lower than your answer to b. [2]

Physics for the IB Diploma


161

8 This question is about calorimetry. 2 A particle undergoes simple harmonic oscillations with
amplitude A. The total energy of the particle is E and the
a A student claims that the kelvin temperature of a body
period of the oscillations is T. The amplitude of oscillations
is a measure of its internal energy. Explain why this A
statement is not correct by reference to is reduced to 2 .The new total energy and period of the
i a solid melting. [2] motion are
ii an ice cube and an iceberg both at 0 °C. [2]
Total energy Period
b In an experiment, a heater of power 35 W is used to A E
T
warm 0.240 kg of a liquid in an un-insulated container. 2
The graph shows the variation with time of the B E T
temperature of the liquid. 4 2
C E T
2 2
D E
T
Temperature

3 The graph shows the variation with distance of the


displacement, at a particular time T, of a transverse wave
travelling towards the right.
y / cm
1.5
Time
1.0
The liquid never reaches its boiling point. 0.5
i Suggest why the temperature of the liquid 0 x/m
0.5 1.0 1.5 2.0
approaches a constant value. [2] –0.5
ii After the liquid reaches a constant temperature –1.0
the heater is switched off. It is measured that the –1.5
temperature of the liquid decreases at a rate of
A point on the wave has been marked. The direction of the
3.1 K min−1.
velocity of this particle at time T is
Use this information to estimate the specific heat
capacity of the liquid. [3] A → B ← C ↓ D ↑

Topic 4: Oscillations and waves 4 The graph in question 3 now represents a longitudinal
wave. What is the direction of velocity of the particle shown
1 Which of the following graphs shows the correct variation
at time T?
of acceleration with displacement from equilibrium in
simple harmonic motion? A → B ← C ↓ D ↑

A a B a
5 Consider the following waves.

I sound waves
II gamma rays
x x
III radio waves
IV blue light

Which of these are likely to show appreciable diffraction as


C a D a they pass through an opening of size 1 m?

A All B I only C I and III D II and IV

x x

Exam-style questions
162

6 A wave of amplitude A, frequency f, wavelength λ and 8 This question is about simple harmonic motion.
speed v enters a different medium. Which of the following
a A cart is attached to two identical springs as shown in
lists contains gives quantities that will change as the wave
the diagram. The other ends of the springs are attached
enters the new medium?
firmly to vertical walls.
A A, f , v B A, λ, v C f, λ, A D v, λ, f

7 This question is about simple harmonic motion.

a The graph shows the variation with displacement from


equilibrium of the kinetic energy of a mass of 0.25 kg
that is executing simple harmonic oscillations.
The cart is in equilibrium in the position shown. When
EK / J the cart is displaced by an amount x (in metres) from its
0.6
equilibrium position, the acceleration (in m s−2) is given by
0.5 a = −39x.
i State the features of this equation that imply that
0.4
the oscillations will be simple harmonic. [2]
0.3 ii Determine the frequency of the oscillations. [2]
0.2 b The cart in a is displaced from its equilibrium
0.1 position by 0.15 m and is released. The mass of the
cart is 1.2 kg.
x/m i Calculate the maximum kinetic energy of the
–0.15 –0.10 –0.05 0 0.05 0.10 0.15
cart. [3]
Calculate ii Draw a graph to show how the kinetic energy
i the period of oscillation. [3] of the cart varies with time. [3]
ii the maximum acceleration of the mass. [2] iii On the graph identify one point where the cart
is at its equilibrium position. Label this point E. [1]
b Copy the graph above and draw on another graph to
show the variation with displacement from equilibrium c Describe how your graph in b ii would change,
of the kinetic energy of the same particle when the if at all,
amplitude is reduced to 0.10 m. [2] i if the motion of the cart was lightly damped. [2]
ii if the motion was undamped, but the amplitude
c A car of mass 1200 kg (including passengers) travels on
was increased from 0.15 m to 0.21 m. [2]
a horizontal road. The effective spring constant of the
shock absorbers of the car is 6.0 × 104 N m−1. d The right spring is now connected to an oscillator of
variable frequency.
i Calculate the frequency of vertical oscillations
of the car. [2]

ii There are bumps on the road separated by 15 m. The oscillator


car receives a jolt every time it goes over a bump in
the road.

Explain why at a speed of about 16 m s−1 the ride will


be especially uncomfortable. [3] Draw a sketch graph to show the variation with the
oscillator frequency of the amplitude of oscillations
of the cart assuming light damping. [3]

Physics for the IB Diploma


163

9 This question is about waves. 11 This question is about interference.

a State the difference between a longitudinal and a a State the principle of superposition. [1]
transverse wave. [2]
b Two sources of sound, S1 and S2, emit identical waves
b The graph starting at (0, 4) shows the variation with towards a point P.
distance of the displacement of a wave travelling to the i Explain what is meant by the path difference
right. The graph starting at (0, 0.5) shows the variation of the waves at P. [1]
with distance of the displacement of the same wave ii Discuss the significance of the path difference
92 ms later. for the interference of the waves at P. [2]

y / cm c The two sources of sound in b are replaced by


4 two identical lasers. State and explain whether an
interference pattern will be observed at point P. [3]
2 Topic 5: Electric currents
1 In the circuit shown an ammeter and a voltmeter have
0 x/m been incorrectly connected.
0.2 0.4 0.6 0.8 1.0
What is the reading of the voltmeter?
–2
6.0 V

–4
V
Use the graph to determine for this wave 3.0 Ω 3.0 Ω
i the amplitude. [1]
ii the wavelength. [1]
A
iii the speed. [2]
iv the frequency. [2]
A 0V B 2.0 V C 3.0 V D 6.0 V
10 This question is about refraction.
2 The resistance of a cylindrical copper wire is R. The wire
The diagram shows wavefronts of a wave entering a is melted and then made into another cylindrical wire of
medium B from a medium A. double the length. The resistance of the new wire is
R R
X A 2 B 4 C 2R D 4R

3 The diagram shows part of a potential divider. The


potential difference across the two resistors is V.

R1 V

R2
A B

a State what is meant by the term wavefront. [2] The reading of the ideal voltmeter V is
R R R1 R2
b i Copy the diagram precisely and draw a line to show A V 1 B V 2 C V D V
R2 R1 R1 + R2 R1 + R2
the extension of wavefront X in medium B. [1]
ii On your diagram draw a ray for the waves in
medium B. [1]
iii By taking measurements on the diagram,
wave speed in A
estimate the ratio wave speed in B . [2]

Exam-style questions
164

4 The diagram shows a circuit including a thermistor and a 6 This question is about electric resistance.
light-dependent resistor (LDR) connected to a battery of
Two devices, A and B, have voltage–current characteristics
negligible internal resistance.
as shown in the graph.

V/V
40

30 A
V

20 B

Which of the following changes in the temperature of


the thermistor and the intensity of light on the LDR 10
will definitely result in an increase of the reading of the
voltmeter? 0 I/A
0 1 2 3 4 5 6
Temperature Intensity of light
a i Define electric resistance. [2]
A increase increase
ii Explain why neither A nor B obey Ohm’s law. [1]
B increase decrease iii Describe how the resistance of A and of B varies
C decrease increase as the current is increased. [2]
D decrease decrease 30 V
b The devices A and B are
2.4 A
connected as in the
5 This question is about circuits. circuit shown. The current
in the circuit is 2.4 A.
a A battery of internal resistance 0.80 Ω sends a current
of 1.4 A through an external resistor. The work required
to push one electron through the external resistor is A B
7.2 × 10−19 J. Calculate the emf of the battery. [2]

b In this circuit the battery has negligible internal i State the voltage across each resistor. [2]
resistance. ii Calculate the power dissipated in each device. [1]
iii Calculate the internal resistance of the battery. [2]
0.48 A
Topic 6: Fields and forces
1 The radius of the Earth is RE. The gravitational force on a
R satellite in orbit around the Earth a distance of RE from the
Earth’s surface is F. The gravitational force on the same
satellite when in orbit at a distance of 3RE from the Earth’s
12 Ω 12 Ω surface is

F F F 4F
0.36 A A 4 B 3 C 9 D 9

Calculate 2 The electric force between two bodies X and Y of electric


i the emf of the battery. [2] charge q1, q2 respectively when a distance r apart is F. The
ii total power dissipated in the circuit. [1] charge q1 on X is made four times larger. The electric force
iii the value of resistance R. [2] on X and Y now is

Force on X Force on Y
A F F
B 4F F
C F 4F
D 4F 4F

Physics for the IB Diploma


165

3 Three equidistant, parallel wires, X, Y and Z, carry equal 5 This question is about electric fields.
currents into the page as shown. Which arrow shows the –

+ + + + + +
Two parallel plates have a potential
direction of the magnetic force on wire Z?
difference V across them. –
X Y Z –


A ↑ B → C ← D ↓ –
V

4 This question is about electric fields. a Define electric field. [2]

a An electron is accelerated from rest by a potential b i Draw the electric field pattern within the parallel
difference of 120 V. plates. [2]
ii Draw a sketch graph to show how the force on a
Show that the speed of the accelerated electron is
proton within the plates varies with distance from
6.5 × 106 m s−1. [2]
the positive plate. [2]
b The accelerated electron in a enters the region between
c An electron is placed on the inside of the negatively
two parallel oppositely charged plates.
charged plate and a proton on the positively charged
plate.
+ + + + + + + + + +
250 V Calculate the ratio of the kinetic energy of the electron
to that of the proton when each particle arrives at the
opposite plate. [3]
15 cm
6 This question is about motion in a magnetic field.

A charged particle of mass 1.67 × 10−27 kg


0V and charge of magnitude 1.6 × 10−19 C
– – – – – – – – – – enters a region of magnetic field with
speed 4.5 × 106 m s−1. The magnetic field
i Copy the diagram and draw an arrow to represent is directed out of the plane of the page
the force on the electron while it is within the and has magnitude 0.25 T. The particle
plates. [1] exits the magnetic field region after it has
Calculate completed a quarter of a circle.
ii the electric force on the electron while it is within
the plates. [2] a Suggest the reason why the path of the particle in the
iii the gravitational force on the electron. [2] region of the magnetic field is circular. [2]
iv the ratio of the electric to the gravitational force
on the electron. [1] b Determine the sign of the charge of the particle. [1]

c It is desired to have the electron move through the c Explain why the speed of the particle is constant. [3]
plates undeflected from its original path. To do this
d Calculate how much time the particle spent in the
a magnetic field will be introduced in the region
region of magnetic field. [3]
between the plates.
i State and explain the direction of the magnetic
field. [2]
ii Calculate the magnitude of the magnetic field
strength required. [2]

Exam-style questions
166

Topic 7: Atomic and nuclear physics 2 This question is about atomic spectra.

1 This question is about the Rutherford experiment. a Outline a laboratory procedure by which an atomic
emission spectrum may be observed. [3]
a The diagram shows apparatus used in the Rutherford
alpha particle scattering experiment. b Describe how the existence of atomic spectra is evidence
for atomic energy levels. [2]
foil
c The diagram shows a few atomic energy levels of a
hypothetical atom.
source

detector

Energy
The collimating plates in front of the source ensure that
the beam of alpha particles is very narrow.

Explain why
i the beam must be very narrow. [1]
ii the foil must be very thin. [2]

b State what the results of this experiment imply


Copy the diagram and draw arrows to indicate the
about the structure of the atom. [4]
transition with the
c In the diagram below three alpha particles are i longest wavelength. [1]
approaching a nucleus of the gold isotope 197
79Au. The ii shortest wavelength. [1]
path of one of the particles is shown.
3 This question is about radioactive decay.

a Radioactive decay is said to be random and


spontaneous. Explain what is meant by this
statement. [2]

b i The nucleus of phosphorus-32 ( 32 15P) decays


by beta particle emission to a nucleus of
Copy the diagram and draw lines to show the paths of sulfur (S). Write down the reaction equation
the other two alpha particles. [2] for this decay. [3]
ii The half-life of phosphorus-32 is 14.3 days.
d An alpha particle of initial kinetic energy E directed
Calculate the time after which the ratio of
straight at the nucleus stops at a distance d from the
sulfur to phosphorus atoms is 15 : 1. (You may
centre of the nucleus. The gold nucleus is now replaced
assume that initially no sulfur atoms are present.) [2]
by a nucleus of a different gold isotope. An alpha
particle of initial kinetic energy E is directed straight c The following data on atomic masses are available.
at this nucleus. State and explain any change of the
phosphorus 3.19739 × 107 u
distance d. [2]
sulfur 3.19721 × 107 u

Determine the energy released in the decay in b. [2]

Physics for the IB Diploma


167

4 This question is about fission and 9 40


A 116
31
P Sn 130
Xe
fusion. 27
Al 35
56
Fe 75
As 86
Sr 98
Mo
144
Nd
Cl 63
176
Hf 194
16
O 62 Cu 150 Pt
8 20
Ne Ni 124
Xe 136
Xe Nd 182 235
a Distinguish between fission and C 12 W 208 U
4
19
F Pb
fusion. [2] He 14
238
U
N

Average binding energy per nucleon / MeV


7 11
b The graph shows the variation with B
9
nucleon number of the average Be
6
binding energy per nucleon. 7
Li
6
i Describe which region contains 5 Li
the most stable nuclei. [1]
ii By reference to the binding 4
energy curve explain why energy
is released in fission and fusion. 3 3
[2] H
3
He
c Use the binding energy curve to 2
estimate the energy released in the
2
fission reaction 1 H

U + 0n → Ba + 36Kr + 3 0n.
235 1 144 89 1
92 56 [2] 1
H
0
0 20 40 60 80 100 120 140 160 180 200 220 240

Nucleon number, A

Topic 8: Energy, power and climate 5 This question is about a solar panel.
change a It is being considered to use a solar panel to power a
1 The power that can be extracted from a wind generator pump in order to raise water from a well. The following
when the wind speed is v is P. Assuming the efficiency data are available:
stays the same, the power extracted at a wind speed 2v is
area of panel 0.016 m2
A 2P B 4P C 6P D 8P solar intensity at location of 740 W m−2
panel
2 The percentage of electrical power that is produced
voltage output of panel 24 V
through nuclear reactors worldwide is about
current delivered to pump 0.32 A
A 3% B 9% C 18% D 24%
efficiency of pump 30%
depth of well 8.0 m
3 Some of the solar radiation incident on the Earth is
reflected back into space. Most of the reflection comes from Calculate
i the power incident on the panel. [1]
A the oceans
ii the electric power delivered to the pump. [1]
B the clouds
iii the efficiency of the solar panel. [1]
C the greenhouse gases in the atmosphere
iv the rate, in kg s−1, at which water is being
D the deserts.
raised from the well. [4]
4 Energy density is defined as b Determine, based on your answer to a, whether this
is a practical method for raising water out of the well. [2]
A the amount of energy that can be extracted from a fuel.
B the amount of energy that can be extracted from a unit
mass of fuel.
C the amount of power that can be extracted from a fuel.
D the amount of power that can be extracted from a unit
mass of fuel.

Exam-style questions
168

6 This question is about wind power. 8 This question is about the energy balance of the Earth.

a Derive the formula for the power generated by a a State the Stefan–Boltzmann law. [1]
1
wind generator P = 2 ρAv3 where ρ is the density of b The average distance between the Earth and the
air, A the area swept by the blades of the windmill Sun is 1.5 × 1011 m. The Sun radiates a total power
and v the speed of air. [3] equal to 3.9 × 1026 W. Show that the intensity of the
Sun’s radiation at the position of the Earth (the solar
b The power required by a village is 120 kW. It is
constant S) is approximately 1400 W m−2. [2]
proposed to supply this power by a series of windmills.
The village proposes to use windmills whose blades c A student attempts to understand the energy balance
have a radius of 5.2 m. The average wind speed in a of the Earth by making a model that ignores the
location near the village is 6.5 m s−1 and the density greenhouse effect. The model may be described by the
of air is 1.2 kg m−3. diagram.
i Calculate the number of windmills needed to
supply the village with electrical power. [3] incoming radiated
intensity reflected by Earth’s
ii State two reasons why in practice more surface
windmills will be needed. [2]

c A village engineer observes that the power supplied


by the windmills early in the morning is greater
than that at midday even though the wind speed is
the same.

Suggest an explanation of this observation. [2] Earth’s surface

7 This question is about the Stefan–Boltzmann law. All the reflected radiation is from the atmosphere and
the Earth surface may be considered to be a black
a State the Stefan–Boltzmann law and define
body.
emissivity. [2]
i Define albedo and emissivity. [2]
b A black body of temperature T1 is surrounded by a ii State two factors that affect the albedo of a
body X of emissivity e at a temperature T2. The arrows planet. [2]
in the diagram represent the power of the radiation, iii Outline why the incoming intensity averaged
per unit area, radiated by the black body, reflected S
over the Earth’s surface is 4 . [2]
by body X and radiated by body X. (No radiation gets
iv Show that this model requires an Earth surface
transmitted.) (1 − α)S
temperature of T = 4 4σ . [3]
v Using α = 0.30, calculate that the equilibrium
body X Earth temperature is 256 K. [1]

The temperature obtained in c v is too low and so the


student changes the model to one in which the atmosphere
absorbs long wavelength (infrared) radiation emitted by
the Earth.

black body incoming It radiated by


intensity atmosphere
reflected
i State an expression of each of the three intensities
absorbed
in terms of all or some of the symbols e, σ, T1
and T2. [3] radiated radiated by
ii Deduce, using your answer to i, that the power by atmosphere
Earth
per unit area lost by the black body is eσ (T14 − T24). [2]
T
iii Hence deduce the value of the ratio 1 given that Earth’s surface
T2
the black body receives as much power as it emits.
[1] The atmosphere radiates both upwards into space as well
as towards the Earth. The equilibrium temperature of the
Earth is TE and that of the atmosphere is TA.

Physics for the IB Diploma


169

d The intensity of the incoming radiation at the top of 10 This question is about global warming.
S αS
the atmosphere is 4 and the reflected intensity is 4 . a Distinguish between the greenhouse effect and the
The emissitivity of the atmosphere is e. Explain, briefly, enhanced greenhouse effect. [2]
why the intensity of the radiation emitted by
b One of the predictions of the enhanced greenhouse
i the Earth is eσ TE4. [1]
effect is a rise in sea level.
ii the atmosphere towards the Earth is eσ TA4. [1]
i Define the coefficient of volume expansion of
iii Explain why the intensity labelled It in the
water. [1]
diagram is equal to (1 − e)σ TE4 . [2]
ii Calculate the expected rise in sea level in the
e By reference to the energy balance of the atmosphere oceans for a temperature increase of 2.5 K in the
and of the Earth surface respectively, deduce that average Earth temperature. You may assume that
i 2TA4 = TE4 [2] the average sea depth is 3.5 km and the volume
(1 − α)S coefficient of water is +2 × 10−4 K−1. [3]
ii TE = 4 2σ(2 − e) [3]
c State three assumptions that were made in calculating
iii Evaluate the equilibrium temperature of the the answer to b ii, apart from those that were already
Earth and of the atmosphere using α = 0.30 and mentioned in question b ii. [3]
e = 0.65. [2]
d Outline why increased levels of carbon dioxide in the
f The student’s model is actually physically incorrect atmosphere are expected to lead to an increase in the
because one other source of radiation towards the Earth’s average temperature. [2]
Earth surface has been ignored. State this source of
radiation. [1] e State one piece of experimental evidence that
connects increased concentrations of carbon dioxide
g i Outline a mechanism by which part of the to increases in temperature. [2]
radiation emitted by the Earth is absorbed by
the atmosphere. [3]
Topic 9: Motion in fields
ii Suggest why the incoming solar radiation is not
affected by the mechanism you outlined in g i. [2] 1 The diagrams show the variation with time of the
horizontal and vertical components of velocity for a particle
9 This question is about the temperature of Mars. moving in two dimensions.
Vx Vy
a The solar power per unit area averaged over the upper
atmosphere of the Earth is about 350 W m−2. The average
distance between Mars and the Sun is about 1.5 times
larger than the distance between the Earth and the
Sun. The albedo of the Mars atmosphere is 0.15 and the
surface may be assumed to radiate like a black body.
i Calculate the average intensity (over the whole t t
Mars surface) received by Mars. [1]
ii Deduce that the average Mars temperature is The particle must be moving in
approximately 220 K. [4] A a circle. B a parabola.
b The actual average temperature of Mars is 210 K. Using C a straight line. D an ellipse.
your answer to a ii, discuss whether the greenhouse
effect is a significant factor in determining the average 2 A projectile is launched at some angle above the
Mars temperature. [2] horizontal. Which of the following quantities decrease and
which stay constant as the projectile moves to the highest
point of its path?

Decreases Stays constant


A speed acceleration
B total energy vertical velocity component
C horizontal velocity net force
component
D kinetic energy potential energy

Exam-style questions
170

3 A ball of mass m moving on a horizontal table with speed 6 This question is about projectile motion.
v. The ball lands a distance D from the foot of the table.
a A ball is projected from the edge of a cliff with a speed
Resistance forces are negligible.
of 22 m s−1 making an angle 44° to the horizontal.
The cliff is 35 m above the surface of the sea. The
acceleration of free fall is 9.8 m s−2 and air resistance is
negligible.

35 m
v
A second ball mass 2m moves on the table with speed 2 .
The distance from the foot of the table where the second
ball lands is
D D D Using conservation of energy, calculate
A D B C 4 D 2 i the maximum height reached by the ball above
2
the sea. [2]
4 The centres of two identical spherical masses each of mass ii the speed of the ball as it impacts the water. [2]
M are separated by a distance D.
b Using your answer to a determine
i the time it took the ball to impact the water. [2]
D ii the angle at which the ball impacts the water. [2]

c The graph shows the path of the ball. Copy the graph
and draw the path when air resistance cannot be
ignored. [3]
Which of the following gives the correct gravitational field
strength and gravitational potential at the mid-point of the y
line joining their centres?

Gravitational Gravitational x
field potential
A 0 0
B 0 4GM
− D
C 2GM 0
D2
D 2GM 4GM
D2 − D

5 The gravitational potential at the surface of a planet is V.


The gravitational potential at the surface of another planet
of the same mass and eight times the density of the first is

A V B 2V C 4V D 8V

Physics for the IB Diploma


171

7 This question is about satellite motion. 9 This question is about orbital motion.

a A satellite orbits a planet of mass M in an orbit of Two stars of masses M1 and v2


radius r. M2 orbit a common centre M2
i Show that the speed v of the satellite is given by P under the action of their
GM mutual gravitational force. At a R2
v= r . [2]
particular moment in time the P
ii Use your answer to i to derive an expression for the
stars are diametrically opposite
kinetic energy of the satellite. [1] R1
each other as shown in the M1
iii Hence show that the total energy of the satellite is
diagram.
given by E = −
GMm
. [1] v1
2r
b i By reference to the formula for the total energy of
a satellite in orbit, explain why a frictional force a By considering the force on the inner star, show that the
opposing the motion of a satellite will bring the 4π2R1(R1 + R2)2
period of the inner star is given by T2 = .
satellite closer to the Earth. [2] GM2
[3]
ii Hence deduce that the satellite’s kinetic energy
will increase. [1] b Suggest why the outer star must have the same
iii Explain where the extra kinetic energy comes from. period. [2]
[1]
c Using your answer to a or to b, determine which
star has the larger mass. [2]
8 This question is about gravitational potential.

The graph shows the gravitational potential of a planet and 10 This question is about escape speed.
its moon as a function of the distance from the centre of
a i Show that the escape speed from the surface
the planet along a line joining their centres. The centre of
of a planet of mass M and radius R is given
the planet is at r = 0 and the centre of the moon at
2GM
r = d. The centre-to-centre separation of the planet and the by vesc = R . [3]
moon is d. ii Calculate the escape speed from Earth
r/d
0 0.2 0.4 0.6 0.8 1.0 (M = 6.0 × 1024 kg, R = 6.4 × 106 m). [1]
0
b Voyager 2, a spacecraft launched in the late 1970s, has
–1 now left the solar system and for all practical purposes
has escaped the gravitational influence of the Earth,
V / × 108 J kg–1

–2 the Sun and the other planets. The launch speed of


Voyager was considerably less than the escape speed
–3 calculated in ii.
Explain this observation. [2]
–4 c A probe of mass m is launched from the surface of a
planet of mass M and radius R with a speed that is half
the escape speed from the planet.
a Define gravitational potential. [2] Calculate the maximum distance from the planet the
b Explain, using the graph, why at r = 0.63d the probe will get to. [3]
gravitational field is zero. [2]
Topic 10: Thermal physics
c Deduce the ratio of the mass of the planet to the
mass of the moon to 1 s.f. [1] 1 An ideal gas is contained within a cylinder with a piston. The
piston is moved in rapidly and the temperature of the gas
d Calculate the energy required to send a 500 kg probe increases. The reason for the increase in temperature is that
from the surface of the planet to the surface of the
moon. [2] A the molecules are colliding more frequently with each
other.
e It is required to send the probe very far away from B the forces between molecules have become stronger.
both planet and its moon. State and explain from which C the molecules have gained kinetic energy from the
point on the line joining the planet to the moon piston.
would the least energy be required for this. [2] D the intermolecular potential energy of the molecules has
increased.

Exam-style questions
172

2 An ideal gas undergoes the change shown in the 5 This question is about ideal gases and
pressure–volume graph. thermodynamics.

P / 105 Pa A container is filled with molecules of an ideal gas. The


pressure of the gas is 9.8 × 106 Pa and the volume of the
12.0 container is 3.3 × 10−3 m3. The temperature of the gas is
580 K.

a Calculate the number of molecules in the gas. [2]

b i The temperature of the gas is decreased at constant


volume until the pressure is lowered to 5.4 × 106 Pa.
4.0 Explain, in terms of molecular motion, why the
pressure of the gas decreased. [3]
ii Calculate the new temperature of the gas. [2]
V / 10–4 m3
2 8 c The gas in b is now allowed to expand to a new volume
at constant pressure such that the final temperature is
The work done by the gas is
equal to the original temperature of 580 K. The change
A 24 J B 48 J C 240 J D 480 J in the internal energy of the gas during this expansion
is 22 kJ.
3 In an isothermal compression of an ideal gas, 500 J of
Calculate
energy is extracted from the gas. The amount of work done
i the final volume of the gas. [1]
on the gas is
ii the work done by the gas in expanding to the
A zero final volume. [2]
B 500 J iii the energy transferred. [2]
C more than 500 J
d The gas is now compressed isothermally back to its
D less than 500 J
original state in a. The work done on the gas is 19 kJ.
i State whether energy is removed or added to
4 This question is about the first law of thermodynamics.
the gas during the compression. [2]
The same quantity of heat is transferred into identical ii Calculate the magnitude of the energy
quantities of two ideal gases. The first gas absorbs the heat transferred. [2]
at constant volume and the second at constant pressure.
Determine in which case the temperature increase will be 6 This question is about entropy.
the largest. [3] a State what entropy is a measure of. [1]

A fixed quantity of liquid water at 0 °C freezes to solid


ice at 0 °C.

b Explain why the entropy


i of the water decreased. [2]
ii of the surroundings increased. [2]

c Explain how your answers to b are consistent with the


second law of thermodynamics. [2]

Physics for the IB Diploma


173

Topic 11: Wave phenomena b The ends of a tight string are kept fixed.

1 Two pipes each have one closed and one open end. The
length of pipe X is double the length of pipe Y. The ratio of
the fundamental frequency of pipe X to that of pipe Y is i Suggest how a standing wave can be established
on this string. [2]
1 1
A 2 B 4 C 2 D 4 ii Copy the diagram and draw a representation of
the standing wave on the string when the string
2 Which of the following is true for a standing wave? vibrates at its lowest possible frequency. [1]
iii On your copy of the diagram draw the standing
A all points are in phase
wave pattern when the string vibrates at a
B points within two adjacent nodes are in phase
frequency that is three times larger than the
C points within two adjacent antinodes are in phase
frequency in ii. [2]
D the phase increases from 0 to 2π from one node to the
next. c The frequency of the wave in b iii is 72 Hz and the
length of the string is 1.8 m. Calculate the speed of the
3 Coherent monochromatic light of wavelength λ is incident waves on the string. [3]
on a rectangular slit of width b. A diffraction pattern is
observed on a screen some distance away. The angular 7 This question is about the Doppler effect.
width of the central diffraction pattern is approximately
a i State what is meant by the term Doppler effect. [1]
λ 2λ 1.22λ 2.44λ
A b B b C b D b ii By drawing an appropriate wavefront diagram
illustrate the Doppler effect in the case of a
4 A radio telescope just manages to resolve two stars that source moving towards a stationary observer. [2]
are both emitting radio waves of wavelength 21 cm. The
b A source of sound is attached to the circumference of a
angular separation of the stars is 6.0 × 10−3 radians. The
horizontal disc. The disc rotates at constant speed. The
collecting area of the radio telescope has a diameter of
source emits sound of frequency 4200 Hz as measured at
about
the source, in all directions.
A 0.4 m B 4m C 40 m D 400 m
sound
5 Unpolarised light of intensity I0 is incident on two
polarisers whose transmission axes are parallel as shown.
transmitted light

An observer at some distance from the disc measures


the frequency of the sound received. The variation of the
The intensity of light transmitted through the polarisers is frequency with time is given by the graph. Explain the
I I reason for the variation of frequency. [2]
A I0 B 0 C 0 D zero
2 4
f / Hz
6 This question is about standing waves. 4400

a State two differences between a travelling (progressive)


4300
and a standing (stationary) wave. [2]
4200

4100

4000 t/s
0.0 0.5 1.0 1.5 2.0

Exam-style questions
174

c Use the graph to determine c Light of intensity I0 is incident on a polariser. The


i the speed of sound given that the speed of the disc polariser is rotated about the direction of the incident
is 19 m s−1. [2] light by an angle θ. On the same axes, sketch the
ii the radius of the disc. [2] intensity of the transmitted light as function of θ as
θ varies from 0° to 360° when the incident light is
d Describe one practical application of the Doppler
i unpolarised. [2]
effect. [2]
ii polarised. [2]

8 This question is about resolution. d Outline the use of polarisation in stress analysis. [4]

a State the Rayleigh criterion and illustrate your answer


10 This question is about optical activity.
by a sketch diagram showing the variation of intensity
with diffraction angle. [3] a State what is meant by an optically active
substance. [2]
b i The diameter of the pupil of a human eye is
3.00 mm. b Outline how you would investigate optical activity
Show that the human eye can resolve two separate in a sugar solution. [3]
objects in blue light of wavelength 4.80 × 10−7 m
provided their angular separation is at least 11 This question is about polarisation upon reflection.
1.95 × 10−4 rad. [2]
ii Two objects can just be resolved in blue light. State a State what is meant by polarised light. [1]
and explain whether these objects can be resolved in b State Brewster’s law. [2]
red light. [3]
c Unpolarised light is incident from air on an air–glass
9 This question is about polarisation. boundary. The reflected light is transmitted through a
polariser whose transmission axis is vertical.
a State what is meant by polarised light. [1] At an angle of incidence equal to 58° the transmitted
intensity through the polariser is zero.
b Two polarisers whose transmission axes are
i Explain why there is an angle of incidence at
perpendicular to each other are placed so that they
which the transmitted light intensity is zero. [2]
partially overlap. The polarisers in this arrangement are
ii Determine the refractive index of the glass. [2]
used to view the calm surface of a lake.

Carefully explain each of the following observations.


i The area of overlap is completely dark. [2]
ii Polariser X is darker than polariser Y. [2]

Physics for the IB Diploma


175

Topic 12: Electromagnetic induction 4 This question is about Faraday’s law.

1 The diagram shows a conducting region of magnetic A metallic wire in the form of a square loop is attached to
loop of wire that is partly within a field out of the page a string that hangs from the ceiling. The string is displaced
region of magnetic field. The field from the vertical position and released. As the loop
is directed out of the page. oscillates it moves in a region of uniform magnetic field
loop
The magnitude of the field is that is horizontal and directed out of the page.
increasing. The loop will move

A to the right
B to the left
C out of the plane of the paper
D into the plane of the paper region of
magnetic
2 A bar magnet is moved towards a metallic ring as shown in field
the diagram. State and explain the direction of the induced
current in the ring. [2] a Explain why the oscillations of the loop will be
damped. [3]

The initial mechanical energy of the system when the wire


was released was 0.26 J and the resistance of the wire is
0.12 Ω. The oscillations die out in 4.0 s.
N S
b What happens to the kinetic energy of the loop? [1]

c Estimate the average rms value of the current in the


loop. [3]

3 This question is about Faraday’s law. 5 This question is about alternating current.
a Define magnetic flux. [1] a The power in the coil of a generator varies with time
according to the following graph.
b State Faraday’s law. [2]
P / kW
c A loop of area 6.0 × 10−2 m2 is moved away from a
current-carrying wire. 100

80
loop
60

40

20
current
0 t / ms
0 10 20 30 40
The average field in the initial position was 5.0 × 10−3 T
and 2.0 × 10−3 T in the new position. It took 0.50 s to The resistance of the coil is 250 Ω.
move the loop. Calculate the average value of the Calculate
induced emf and state the direction of the induced i the peak value of the induced emf in the coil. [2]
current. [3] ii the rms value of the current in the coil. [2]
iii the period of revolution of the coil. [2]

b The coil is now rotated at half the period in iii.


Copy the diagram and on the same axes draw a
graph to show how the new power in the coil varies
with time. [2]

Exam-style questions
176

Topic 13: Quantum physics and nuclear 2 This question is about the wave nature of matter.
physics a State the de Broglie hypothesis. [2]
1 This question is about the photoelectric effect.
b Show that the de Broglie wavelength of an electron
The graphs show the variation with applied voltage of that has been accelerated from rest by a potential
the photocurrent from the same metal when light of low difference of 95 V is λ = 1.3 × 10−10 m. [2]
frequency and light of high frequency are incident on the
c The electrons in b are incident on a crystal.
metal.
The diagram shows electrons scattering from atoms
I / mA I / mA in the crystal that a distance d apart.
2.0 2.0
incident beam scattered beam
1.5 1.5
1.0 1.0
0.5 0.5
V/V V/V
–1 0 1 2 3 4 5 –2 –1 0 1 2 3 4 5
a b
θ
a State and explain which graph corresponds to the
light of low frequency. [2]
d
b Explain how it may be deduced that in both cases
the light has the same photon flux density (number i On a copy of the diagram draw a line to indicate the
of photons per unit area per second). [2] path difference between the scattered beams. [1]
ii Show that the path difference is d sin θ. [1]
c Determine which graph shows the largest light
iii A strong scattered beam is observed when θ = 52.9°.
intensity. [2]
The atom spacing is d = 1.58 × 10−10 m.
d In a photoelectric effect experiment monochromatic Suggest how this is evidence for de Broglie’s
light of wavelength λ = 4.86 × 10−7 m is incident on a hypothesis. [4]
clean metal surface. The maximum speed of the
emitted electrons is v = 3.5 × 105 m s−1.
i Explain why not all emitted electrons have the
maximum speed. [2]
ii Calculate the work function of the surface. [2]

Physics for the IB Diploma


177

3 This question is about beta decay. 5 This question is about nuclear fusion.

a State the experimental evidence in support of the Two hydrogen nuclei may fuse according to the reaction
1H + 1H → 1H + e + ν provided the separation of the nuclei
1 1 2 +
existence of nuclear energy levels. [2]
becomes equal to or less than 2.0 × 10−15 m. Two hydrogen
b The diagram shows some of the nuclear energy levels of
nuclei approach each other along the same line with equal
the nuclei of 125B and 126C.
kinetic energies.
energy
boron carbon

13.4 MeV

a i The nuclei stop when their centres are separated


4.4 MeV by a distance of 2.0 × 10−15 m. Calculate the
electrical potential energy of the two nuclei. [2]
ii Using your answer to i state the initial kinetic
In the 1930s it was believed that the beta decay of the energy EK of one of the nuclei. [1]
12 12
nucleus of 5B into 6C was described by the reaction
b The average kinetic energy of hydrogen nuclei within
equation 5B → 6C + e−. This decay is represented by the
12 12

the Sun is E = 2.1 × 10−23 T J where T is the temperature


arrow.
in the core of the Sun.
State the expected energy Q, of the electron i Show that the temperature for which
emitted in this decay. [1] EK = E is about T = 2.8 × 109 K. [1]
ii Fusion of hydrogen does in fact take place even
c In fact, the energy of the electrons emitted in this decay
though the temperature in the core of the Sun is
varies from zero up to a maximum value that is equal to
only 1.5 × 107 K. Explain how this is possible. [2]
Q.
i Explain how this observation led to the prediction c The binding energy per nucleon for 21H is about
of the existence of a new particle. [3] 1.1 MeV. Estimate the energy released in the fusion
ii State the correct reaction equation for the decay reaction 11H + 11H → 21H + e+ + ν , explaining your work. [3]
of boron into carbon. [1]
6 This question is about radioactive decay.
d The carbon nucleus produced in the beta decay of the
nucleus of boron decays by gamma emission. a In the context of radioactive decay, define decay
Calculate the wavelength of the emitted photon. [2] constant. [1]

b Show that the decay constant λ and half life


4 This question is about the uncertainty principle.
T1/2 of a radioactive isotope are related by
a State Heisenberg’s uncertainty principle as it applies λT1/2 = ln 2. [2]
to position and momentum. [1]
c Potassium (K-40) decays into argon (Ar-40) by beta
b i The nucleus of the carbon isotope 146C has a emission. The half life of K-40 is 1.28 × 109 years.
radius of 2.9 × 10−15 m. Estimate the uncertainty in Potassium is naturally found in lava.
the momentum of an electron confined within a
i Argon is a gas. Suggest why not much argon would
nucleus of 146C. [2]
be found in liquid lava. [1]
ii As a result of the uncertainty calculated in i the
kinetic energy of the electron is approximately ii An old piece of solid lava is found to contain a ratio
100 MeV. By reference to the concept of binding of Ar-40 to K-40 atoms of 0.15. Calculate the age of
energy, suggest whether it is possible for an the lava rock. [4]
electron to exist within a nucleus of 146C. [3]

c In the electron in the box model where an electron is


confined within a region of linear size L, the lowest
h2
energy of the electron is E = 8mL2 , i.e. the electron can
never be at rest.

Explain how this observation is consistent with the


Heisenberg uncertainty principle. [3]
Exam-style questions
178

Topic 14: Digital technology Option A: Sight and wave phenomena


1 This question is about digital storage of information 1 This question is about vision.
and the compact disk (CD).
a i Distinguish between cone and rod cells. [4]
a Convert ii Compare the distribution of cone and rod cells on
i the binary number 1101 into a decimal number [1] the retina. [2]
ii The decimal number 14 into a binary number. [1]
b The graph shows how the response S of rod cells varies
b State three advantages of storing information in with wavelength.
digital rather than analogue form. [3]
S
c i Describe how interference is used to read 1.0
information stored on a compact disk (CD). [2]
0.8
ii Deduce that the pit depth on a CD track must be
related to the wavelength of light used to read the 0.6
λ
CD through the relation d = 4 . [2] 0.4
iii DVDs are read using shorter wavelength laser
0.2
light than that used with ordinary CDs. Suggest an
advantage of this. [2] 0 λ / m × 10–7
3 4 5 6 7
d The surface of a CD on which information is stored is
the area between two concentric circles of inner and Use the graph to explain why red objects would not
outer radii 2.3 cm and 5.9 cm respectively. The separation clearly be seen in low-intensity light. [2]
of two consecutive tracks is 1600 nm. The width of the
c A rose is viewed in white light. The graph shows the
track is 500 nm. Estimate the total length of the spiral
relative amount of light intensity that is absorbed by the
track on a CD. [3]
rose as a function of the wavelength of incident light.
500 nm
%
100
1600 nm

2 This question is about the charged coupled device


(CCD). 0 λ / m × 10–7
400 500 600 700
a Outline how a CCD forms the image of an object. [4]
State the colour of the rose, explaining your work. [3]
2
b The collecting area of a CCD is 82 mm and contains
12 × 106 pixels. The capacitance of a pixel is 25 pF and the 2 This question is about accommodation and the eye.
quantum efficiency of the CCD is 84%.
a i State what is meant by ‘accommodation of the
i Define quantum efficiency. [1]
human eye’. [2]
ii Light of intensity 340 mW m−2 and wavelength
ii Describe how accommodation is achieved. [2]
520 nm is incident on a pixel of the CCD. Calculate
the potential difference that will develop at the ends b The intensity of light during a bright day is 1200 W m−2
of the pixel after a time of 25 ms. [4] but drops to 2.5 × 10−7 W m−2 during a moonlit
night.
c For the CCD in b calculate the smallest distance
i Calculate the factor by which the pupil of the eye
between two points on an object that can just be
will change in radius in order to adjust to this
resolved given that the magnification of the CCD
change in intensity. [2]
is 0.20. [3]
ii Using your answer to i suggest whether the change
of the pupil radius is the only mechanism available
for this adjustment. [2]

Physics for the IB Diploma


179

Option E: Astrophysics 3 This question is about the cosmic microwave


background radiation (CMBR) and the expanding
1 This question is about the star Mirach (beta
Universe.
Andromedae).
a State what is meant by the cosmic microwave
a Distinguish between apparent and absolute
background radiation (CMBR). [2]
magnitude. [2]
b Explain why the presence of the CMBR is evidence for a
b The apparent magnitude of the star Mirach (beta
hot Big Bang. [2]
Andromedae) is 2.06 and its absolute magnitude is
−1.60. The temperature of Mirach is about 3000 K. c The temperature of the CMBR at present is about 2.7 K.
i State the spectral class of Mirach. [1] Determine the wavelength at which most of the power
ii Determine the distance to Mirach. [2] of the CMBR is emitted. [2]

c i The absolute magnitude of the Sun is 4.82. d The diagram shows the expansion of the Universe if it
Estimate that the ratio of the luminosity of contained no matter. The present time is indicated by P.
L
Mirach to that of the Sun is M ≈ 370. [3] empty Universe
L0
ii The temperature of the Sun is 6000 K.
Determine the ratio of the radius of Mirach
R
to that of the Sun, M. [4]
R0

Radius
iii Suggest which type of star Mirach is. [2]

d Describe what information about a star may be


deduced by a study of its spectrum. [3]

2 This question is about Cepheid stars.

a The graph shows the variation of the apparent P Time


brightness of a Cepheid star with time.
i Current evidence suggests that the Universe is flat.
b / ×10–9 W m–2 Explain what this means. [2]
8 ii Copy the diagram and draw a line to show the
expected expansion of a flat Universe. [2]

iii It has been a very difficult process for astrophysicists


to determine that the Universe is in fact flat.
Suggest a reason for this. [2]
6

0 5 10 15 20 25 30 35 t

i Outline why the apparent brightness of a


Cepheid star varies. [2]

ii The average luminosity, L, of a Cepheid star (in


W ) is related to the period of variation of apparent
brightness, T (in days), by the equation
log10 L = 1.13 log10 T + 29.2. Determine the
distance to the Cepheid star. [3]

b Describe what is meant by the statement Cepheid


stars are standard candles. [3]

Exam-style questions
180

4 This question is about stellar evolution. Option F: Communications


The HR diagram shows two main sequence stars: our Sun 1 This question is about noise and attenuation.
and another star, X.
a The graphs show an input signal to a coaxial cable and
L the same signal after it has travelled a certain distance in
the cable.
X
V/V V/V
2 1.0

Sun 1 0.5

0 t / ms 0 t / ms
0 0.5 1.0 1.5 2.0 0 0.5 1.0 1.5 2.0
–1 –0.5

–2 –1.0
T
i Identify the effects of noise and attenuation
a Explain how it may be deduced that star X is more on the transmitted signal. [2]
massive than the Sun. [2] ii Describe what you might expect the transmitted
signal to look like, if it had been transmitted
b The mass of star X is in fact about 10 times larger through the same distance in an optic fibre. [1]
than that of the Sun.
Distinguish the evolution of star X from that of the 2 This question is about modulation.
Sun by reference to
i the time spent on the main sequence. [2] a State, in the context of communications, what is
ii the nuclear reactions taking place after both meant by modulation. [2]
stars have left the main sequence. [2] b Describe, with the help of diagrams, AM and FM. [4]
iii the likely end stage of both stars. [2]
c Compare two advantages and two disadvantages
c Describe the conditions under which the end of FM over AM. [4]
stage of star X is the same as that of the Sun. [3]
d The diagram shows an AM carrier wave.
5 This question is about Hubble’s law. V/V
a State Hubble’s law. [2]
7.5
b i The wavelength of a certain spectral line in the
5.0
spectrum of hydrogen is 656 nm when measured
on Earth. The same line observed in the spectrum 2.5
of a distant galaxy is 678 nm. The distance to the
0 t / ms
galaxy is 130 Mpc. Estimate a value for Hubble’s 0 0.5 1.0 1.5 2.0
constant. [3] –2.5
ii Using your answer to i estimate the age of the
Universe. [2] –5.0
iii Suggest whether your estimate is an –7.5
overestimate or underestimate of the true age
of the Universe. [2]
Calculate
i the carrier wave frequency. [1]
ii the signal frequency. [1]
iii the signal amplitude. [1]
iv the bandwidth. [1]

e Draw a sketch graph of the power spectrum of the


carrier wave in d. [2]

Physics for the IB Diploma


181

3 This question is about digital signals. 5 This question is about radio and TV waves.

The diagram shows an analogue signal that has been a A radio signal can be sent to a merchant ship on the
sampled at the indicated times. other side of the Earth from the headquarters of a
company. Explain with the help of a labelled diagram
V/V how sky waves can carry the signal to the ship. [2]

25 b i State why a TV signal from the company’s


headquarters would not be able to reach the ship
20 along the path used in a. [2]
15 ii Suggest how a TV signal can in fact reach the ship.
[1]
10

5
6 This question is about digital transmission of data.

The diagram shows blocks that might be used in the


0 t / ms
0 0.5 1.0 1.5 2.0 transmission of data between a computer and a printer.

Each sample is converted into 5-bit words.


signal in sample- signal out
a Calculate and- ADC DAC
hold
i the frequency at which the signal is being
sampled. [1]
ii the bit rate of transmission of the digitised signal. [1]
iii the duration of one bit. [1]
iv the binary equivalent of the sample taken sampling
at 1.0 ms. [1] clock

b The highest frequency contained in the signal


is 12 kHz. Suggest whether there would be any a Explain why this arrangement is not suitable for large
advantage in increasing the sampling frequency. [2] distance transmission of data. [3]
c A digital signal transmitted along a transmission line will b Copy and modify the block system so it is suitable for
become wider as a result of dispersion. Explain the effect transmission over large distances. [2]
on the maximum frequency that can be transmitted. [2]
c A simple receiver uses the following components: AF
4 This question is about optical fibres. amplifier, antenna, demodulator, loudspeaker, tuned
circuit.
a State and explain two reasons for which infrared
laser light is used to carry signals in an optical fibre. [4] Draw a block diagram to show how these components
are connected. [4]
b A telephone call is sampled at a frequency of 8.0 kHz
and each sample consists of eight bits. The duration of
one bit is 1.0 ns.
i Calculate the time in between two consecutive
samples. [1]
ii Using your answer to i, state what is meant
by time division multiplexing. [2]
iii What is the largest number of additional signals
that can be carried by this fibre? [1]
iv In practice the number will be less than the
number calculated in iii. Suggest a reason for this.[2]

c The input power in an optical fibre is 3.2 mW. The noise


in the cable has a constant power of 6.0 µW and the
attenuation per unit length of the fibre is 2.1 dB km−1.
It is required that the signal to noise ratio never falls
below 18 dB. Calculate the largest distance over which
the signal can be transmitted without amplification. [3]

Exam-style questions
182

7 This question is about the operational amplifier and Option G: Electromagnetic waves
the mobile phone system.
1 This question is about light.
The diagram shows an ideal operational amplifier
a Light is described as an electromagnetic wave.
operating from a ±6 V source.
Outline what this means. [2]

– b Explain why the sky appears reddish during a sunset. [3]

c i State two differences between laser light and


light emitted from an ordinary filament lamp. [2]
+
V1 ii Outline how laser light is produced. [4]
Vout
V2
2 This question is about a simple magnifier.

a The diagram shows an object placed in front of a


converging lens that is to act as a magnifier.

a State two properties of an operational amplifier. [2] D


b State the value of the output voltage when
i V1 > V2 [1]
ii V1 < V2 [1]
image object u
c The first circuit is modified to the following circuit.

The distance of the object from the lens is u and the


+ image is formed at the near point, a distance D from the
lens.
Vout i State what is meant by near point. [1]
Vin
R ii Calculate the distance u in terms of D and f,
8.0 kΩ
where f is the focal length of the lens. [2]
iii Using your answer derive an expression for the
magnification of the lens. [2]
The gain of the amplifier is 21. The op–amp is still b By drawing appropriate lines on a copy of the diagram
operating from a ±6.0V source. above, locate the positions of the focal points of the lens.
i Calculate the resistance R. [1] [2]
Calculate the value of the output voltage when c In a compound microscope the objective lens has a
ii Vin = 0.04 V. [1] focal length of 8.0 mm and the eyepiece a focal length of
iii Vin = −4.0 V. [1] 5.0 cm. The final virtual image is formed at a distance of
d In the mobile phone system a geographic area is 25 cm from the eyepiece lens. The distance between the
divided into a number of cells. Describe what happens two lenses is 22 cm. Calculate the overall magnification
at the base station and in the cellular exchange of a of the microscope. [5]
mobile phone system when a phone is turned on. [4]

Physics for the IB Diploma


183

3 This question is about interference. 5 This question is about thin film interference.

a Monochromatic light of wavelength 656 nm is incident a A ray of white light is incident on a thin film of soap
normally on two very thin parallel slits. water that is suspended in air.

d M

D = 2.20 m
d

The light is observed on a screen placed far from the


slits. The distance to the screen is D = 2.20 m and the slit The wavelength of the light in air is λ and the refractive
separation is d = 0.150 mm. M is the point on the screen index of the soap water is n.
across from the mid-point of the slits. i Copy the diagram and draw lines to show the
i Explain why the intensity of the light at M is a reflected rays from the top and bottom surface
maximum. [2] of the film that enter the observer’s eye. [2]
ii Point P is the closest point to M on the screen ii Explain why there is only one point at which a
where the light intensity is also a maximum. phase difference occurs and label that point on
Calculate the distance MP. [2] the diagram using the letter P. [2]
b Copy the axes below and draw a sketch graph to b i Deduce that, for normal incidence, the longest
show the intensity distribution along the screen. [2] wavelength for which destructive interference
takes place is λ = 2dn. [3]
ii Calculate the longest wavelength that suffers
destructive interference for a soap film of
refractive index 1.34 and thickness 225 nm. [1]
iii Using your answer to ii explain why the film
will appear coloured. [2]

Option H: Relativity
1 This question is about relativistic kinematics.
c Describe the differences, if any, to the intensity pattern a State the two postulates of the theory of special
you drew in b when the slits are replaced by very many relativity [2]
slits of the same width and separation as those in a. [3]
b A rocket leaves Earth with a speed of 0.60 c towards a
4 This question is about X-rays. distant planet P. The distance between the Earth and the
planet is 12 ly as measured by Earth observers.
a The spectrum of X-rays produced by an X-ray tube
consists of a continuous and a discrete part. Outline Determine the time taken to reach P according to Earth
how each part of the spectrum is produced. [4] and rocket observers. [3]
b i A particular X-ray tube operates at an accelerating c As the rocket passes P a radio signal is sent to Earth.
voltage of 28 kV. Calculate the minimum wavelength Determine the time taken for the signal to arrive at
of the X-rays produced. [3] Earth according to Earth and rocket observers. [4]
ii X-rays of wavelength 2.48 × 10−10 m are incident on
a crystal plane. An intense beam of scattered X-rays
is observed at an angle of 28.4° to the crystal plane.
Determine the separation of crystal planes. [3]

Exam-style questions
184

2 This question is about relativistic kinematics. a i State the principle of equivalence. [1]
ii Use the principle of equivalence to deduce that
In a thought experiment, a train of proper length 240 m is
a ray of light will bend towards a massive body. [3]
moving at 0.80 c relative to the ground.
b A box is in free fall in a uniform gravitational field of
a Define proper length. [1]
strength g.
b Two firework explosions take place at the front and at
A red ray of light is emitted from the ceiling of the box
the back of the train. According to the clock carried by
and is received at the floor of the box. A blue ray of light
an observer at rest in the middle of the train, light from
is emitted from the left wall of the box from a height of
the two explosions reaches this observer at the same
1 m above the floor.
time.
i Explain why the train observer may conclude that the State and explain whether
fireworks exploded at the same time. [2]
ii Explain why the two explosions did not occur at the
g
same time according to an observer at rest on the
ground and state which explosion occurred first. [4]
1m
iii State whether the ground observer or the train
observer is right in determining the time of the
explosions. [1]
i the frequency of the red ray of light when measured
The two explosions make marks on both the train and the at the floor will be less than, equal to or greater than
ground. the frequency measured at the ceiling. [2]
ii the height from the floor where the blue ray of light
c i Determine the distance between the marks made on
will hit the right wall of the box will be less than,
the train according to train observers and according
equal to or greater than 1 m. [2]
to ground observers. [3]
ii Determine the distance between the marks made c State how your answers to b i and b ii would change, if
on the ground according to train observers and at all, if the box was instead accelerating in outer space
according to ground observers. [3] in the direction shown by the arrow labelled g. [2]

3 This question is about relativistic mechanics. 5 This question is about black holes.

a A proton is accelerated from rest to a speed of 0.980 c. a Using the concept of spacetime, describe what is meant
Calculate the value of the accelerating potential. [3] by a black hole. [2]

b Explain why the proton can never be accelerated to b Calculate the Schwarzschild radius of a black
the speed of light. [2] hole of mass 4.0 × 1035 kg. [1]

c Draw sketch graphs to show the variation with speed v c A probe is stationary near the event horizon of the
of the kinetic energy of a particle according to black hole in b. A signal of frequency 6.4 × 1012 Hz
i Newtonian mechanics. [1] is emitted from the probe and is received by a
ii relativistic mechanics. [1] spacecraft far away. The frequency measured by the
spacecraft is 2.8 × 1012 Hz.
d Two protons are approaching each other along a
straight line, each with a speed of 0.90 c relative to a lab. Determine the distance of the probe from the centre
Determine of the black hole. [3]
i the speed of one of the protons relative to the
other. [2]
ii the total energy of one of the protons relative
to the other. [2]
iii the total momentum of the two protons relative
to the lab. [2]

4 This question is about general relativity.

Physics for the IB Diploma


185

Option I: Medical physics 2 This question is about ultrasound.

1 This question is about hearing. a i State what is meant by acoustic impedance. [1]
ii Suggest why considerations of acoustic impedance
a A student listens to music through earphones. The
are important in ultrasound medical imaging. [2]
power of the sound delivered to one of the eardrums
of the student is 150 mW. The eardrum of a student has b The table gives values of acoustic impedance for
area 58 mm2. air and tissue.
i Calculate the sound intensity level at the student’s
eardrum. [3] Acoustic impedance / kg m–2 s–1
ii Comment on your answer to i. [1] air 410
b The diagram shows the variation with frequency f of tissue 1.6 × 106
sound of the threshold of hearing of a young person. ⎛ Z1 − Z2 ⎞2.
The reflection coefficient is given by R = ⎝
Z1 + Z2 ⎠
80
70 air tissue

60
Intensity level / dB

50
40
30
20
10
i The intensity of ultrasound incident on tissue is I0.
0 Calculate the fraction of the intensity I0 that reflects
–10 from the air–tissue boundary. [2]
10 100 1000 10 000 100 000 ii By reference to your answer to i suggest how
Frequency / Hz
ultrasound can be made to enter the patient’s body.
i State what is meant by the threshold of hearing. [2] [2]
ii Determine the range of frequencies that can be c The order of magnitude of the frequency of ultrasound
heard by this person for sound of intensity used in medical diagnosis is 1 MHz. Suggest why such
2.0 × 10−10 W m−2. [3] high frequencies are being used. [2]
ii Suggest what changes, if any, will be made to the
graph as the person gets older. [2]

Exam-style questions
186

3 This question is about X-rays. 5 This question is about radiation.

a Distinguish between CT scanning and a A radioisotope is injected into a patient in order to


X-ray imaging. [3] monitor the function of an organ. Suggest why it is
desirable for the isotope to be a gamma emitter. [2]
b A mono-energetic beam of X-rays of intensity I0 is
incident on tissue. b Two radioisotopes are available for monitoring the
tissue bone
function of an organ. The process of monitoring will
last for no more than about 1 hour. Both isotopes
have the same effective half-life and both are gamma
emitters. Isotope X has a much shorter physical
half-life than isotope Y.
i Distinguish between the physical and effective
half-life of a radioisotope. [2]
ii Suggest why isotope X might be a better choice
of radioisotope for the purpose of monitoring the
9.0 cm 4.0 cm function of a body organ. [2]

After travelling through 9.0 cm of tissue the beam is c A tumour of mass 22 g is injected with a radioisotope
incident on bone of thickness 4.0 cm. The attenuation of activity 3.6 × 107 Bq . The isotope emits gamma rays
coefficient for tissue is 0.14 cm−1 and that for bone is of energy 5.0 × 10−13 J. The quality factor for gamma
0.74 cm−1. rays is 1. Determine the dose equivalent 6 hours after
i State what is meant by the term attenuation injection. [3]
coefficient. [1]
ii State one source of attenuation of X-rays in tissue. Option J: Particle physics
[1]
1 This question is about the Pauli principle.
iii Calculate the fraction of the X-ray intensity after
the beam exits the bone. [3] a State the difference between a fermion and a boson. [1]
iv Using your answer to iii suggest why an X-ray
b Explain the difference between a meson and a
image of a bone fracture will be possible. [2]
baryon. [2]
c Explain the use of an intensifying screen in X-ray 3
c Consider the spin 2 baryon consisting of three
imaging. [2]
down quarks, Δ = (ddd)
4 This question is about nuclear magnetic resonance i State the charge and strangeness of this baryon. [2]
imaging and lasers. ii State the Pauli principle. [1]
iii Outline how the Pauli principle applies to
a Outline the principles behind nuclear magnetic Δ = (ddd). [2]
resonance imaging. [5]

b Describe two applications of lasers in medicine. [4] 2 This question is about antiparticles.

a State the common characteristic shared by a particle


and its antiparticle. [1]

b State and explain the value of the electric charge


in the case of an antiparticle that is identical to its
antiparticle. [2]

c State and explain whether the neutron is its own


antiparticle. [2]

Physics for the IB Diploma


187

3 This question is about exchange particles. 5 This question is about Feynman diagrams.

a The photon is said to be the exchange particle of the a Draw Feynman diagrams to represent the following
electromagnetic interaction. Explain what is meant reactions:
by this statement. [3] i e− + e− → e− + e− [1]
ii e− + e+ → μ− + μ+ [1]
b What can be deduced about the range of the
iii γ + γ → γ + γ [1]
electromagnetic interaction from the fact that the
iv d → u + e− + ν [1]
photon is massless? [2]
v π0 → γ + γ (take the pion to consist of a u and
c i State the names of the exchange particles of the an anti u quark) [1]
weak interaction. [2]
ii Estimate the range of the weak interaction from the 6 HL This question is about resolution.
fact that the mass of the exchange particles
a The existence of nuclei of radius of order 10−15 m was
is of order 100 GeV c−2. [2]
discovered in Rutherford’s classic experiment with
d Before the discovery of the gluon it was thought that the alpha particle scattering.
exchange particle of the strong interaction was a massive
State and explain the order of magnitude of the de
meson.
Broglie wavelength of the alpha particles used in the
i The mass of the exchanged meson is approximately experiment. [2]
140 MeV c−2. Show that this gives the correct range of
b State and explain whether the de Broglie wavelength of
the strong nuclear force. [2]
photons scattering off a proton must be larger or smaller
ii The Feynman diagram shows the interaction
than the answer to a if the photon is to ‘see’ individual
p + n → p + n in terms of meson exchange.
quarks in the proton. [2]
n
p 7 HL This question is about particle detectors.

a Outline the operating principle of the bubble


pion
chamber. [3]

b Explain how the bubble chamber may be used to


n
measure the momentum of a particle. [2]
p
c State and explain an advantage of the proportional
wire chamber over the bubble chamber. [2]
Redraw this diagram so that the hadrons are
represented with their constituent quarks and the
8 HL This question is about the cyclotron.
exchange particles are gluons. [3]
a Outline the operating principle of the cyclotron. [3]
4 This question is about colour.
b A cyclotron has radius 2.0 m and a magnetic field
a A green up quark emits a gluon and becomes a blue
of 1.5 T.
quark. State
i whether the emitted gluon is a real or a virtual Show that the maximum kinetic energy a
particle. [1] proton can be accelerated to in this cyclotron is
ii the quark flavour of the final quark. [1] 430 MeV. [3]
iii the colour quantum numbers of the gluon. [2]
c The proton in b is incident on a stationary pion.
b Explain The reaction is described by the equation
i why a baryon consisting of three red u quarks p+ + π− → X + n0. (The mass of π− is 140 Me Vc-2.)
does not exist. [2] i The particle X is a hadron. State whether X is a
ii whether a baryon consisting of a red u, a red d meson or a baryon. [1]
and a blue s quark could exist. [1] ii State the electric charge of particle X. [1]
iii Calculate the largest mass particle X may have. [2]

Exam-style questions
188

9 HL This question is about the synchrotron. 11 HL This question is about matter and antimatter.

a Describe how a particle gets accelerated in a a Estimate the temperature at which a photon can
synchrotron. [2] produce an electron–positron pair out of the vacuum. [2]

b Explain why the magnets in a synchrotron are b State whether there is a limit on the temperature at
variable in strength. [2] which an electron–positron pair can annihilate into a
photon. [1]
c In the LHC two beams of protons are circulating in
opposite directions. A proton in either beam has a total c Using your answers to a and b suggest why today we
energy of 7.0 TeV. see predominantly matter in the Universe and not
Determine the temperature that corresponds to the antimatter. [3]
available energy in a collision of two protons in the
LHC. [3] 12 HL This question is about strings.

a State two ways in which string theories differ from the


10 HL This question is about deep inelastic scattering standard model of particles. [2]
experiments.
b String theories require more dimensions than the usual
a Describe what is meant by a deep inelastic scattering four. Assuming string theories are right, why are we not
experiment. [2] aware of the extra dimensions? [2]
b Outline how these experiments provide evidence
for
i quarks. [2]
ii gluons. [2]
iii asymptotic freedom. [2]

Physics for the IB Diploma


Physical constants

The values quoted here are those usually used in calculations and problems. Fewer significant digits are
often used in the text. The constants are known with a much better precision than the number of significant
digits quoted here implies.

Atomic mass unit 1u = 1.661 × 10−27 kg = 931.5 MeV c−2

Avogadro’s constant NA = 6.02 × 1023 mol−1

Boltzmann constant k = 1.38 × 10−23 J K−1


1 = 8.99 × 109 N m2 C−2
Coulomb constant 4π ε0
Electric permittivity ε0 = 8.85 × 10−12 C2 N−1 m−2

Gravitational constant G = 6.67 × 10−11 N kg−2 m2

Magnetic permeability µ0 = 4π × 10−7 T m A−1

Magnitude of electronic charge e = 1.60 × 10−19 C

Mass of the electron me = 9.11×10−31 kg = 5.49 × 10−4 u = 0.511 MeV c−2

Mass of the neutron mn= 1.675×10−27 kg = 1.008 665 u = 940 MeV c−2

Mass of the proton mp = 1.673×10−27 kg = 1.007 276 u = 938 MeV c−2

Planck constant h = 6.63 × 10−34 J s

Speed of light in a vacuum c = 3.00 × 108 m s−1

Stefan–Boltzmann constant σ = 5.67 × 10−8 W m−2 K−4

Universal gas constant R = 8.31 J mol−1 K−1

A few unit conversions

astronomical unit 1AU = 1.50 × 1011 m

atmosphere 1 atm = 1.01 × 105 N m−2 = 101 kPa


π
degree 1º = 180 rad

electronvolt 1 eV = 1.60 × 10−19 J

kilowatt-hour 1 kW h = 3.60 × 106 J

light year 1 ly = 9.46 × 1015 m

parsec 1pc = 3.26 ly

radian 1 rad = 180º


π

Physical constants
Masses of elements and selected isotopes

The first table gives atomic masses, including the masses of electrons, in the neutral atom. The masses are
averaged over the isotopes of each element. In the case of unstable elements, numbers in brackets indicate
the approximate mass of the most abundant isotope of the element in question. The masses are expressed in
atomic mass units, u. The second table gives the atomic masses of a few selected isotopes.

Atomic numbers and atomic masses of the elements


Atomic Name and Atomic Atomic Name and Atomic
number symbol mass / u number symbol mass / u
1 Hydrogen, H 1.0080 30 Zinc, Zn 65.37
2 Helium, He 4.0026 31 Gallium, Ga 69.723
3 Lithium, Li 6.941 32 Germanium, Ge 72.59
4 Beryllium, Be 9.012 18 33 Arsenic, As 74.921
5 Boron, B 10.811 34 Selenium, Se 78.96
6 Carbon, C 12.000 000 35 Bromine, Br 79.91
7 Nitrogen, N 14.007 36 Krypton, Kr 83.80
8 Oxygen, O 15.999 37 Rubidium, Rb 85.467
9 Fluorine, F 18.998 38 Strontium, Sr 87.62
10 Neon, Ne 20.180 39 Yttrium, Y 88.906
11 Sodium, Na 22.999 40 Zirconium, Zr 91.224
12 Magnesium, Mg 24.31 41 Niobium, Nb 92.906
13 Aluminium, Al 26.981 42 Molybdenum, Mo 95.94
14 Silicon, Si 28.086 43 Technetium, Tc (99)
15 Phosphorus, P 30.974 44 Ruthenium, Ru 101.07
16 Sulfur, S 32.066 45 Rhodium, Rh 102.906
17 Chlorine, Cl 35.453 46 Palladium, Pd 106.42
18 Argon, Ar 39.948 47 Silver, Ag 107.868
19 Potassium, K 39.102 48 Cadmium, Cd 112.40
20 Calcium, Ca 40.078 49 Indium, In 114.82
21 Scandium, Sc 44.956 50 Tin, Sn 118.69
22 Titanium, Ti 47.90 51 Antimony, Sb 121.75
23 Vanadium, V 50.942 52 Tellurium, Te 127.60
24 Chromium, Cr 51.996 53 Iodine, I 126.904
25 Manganese, Mn 54.938 54 Xenon, Xe 131.30
26 Iron, Fe 55.847 55 Caesium, Cs 132.91
27 Cobalt, Co 58.933 56 Barium, Ba 137.34
28 Nickel, Ni 58.71 57 Lanthanum, La 138.91
29 Copper, Cu 63.54 58 Cerium, Ce 140.12

Physics for the IB Diploma


191

(continued)

Atomic Name and Atomic Atomic Name and Atomic


number symbol mass / u number symbol mass / u
59 Praseodymium, Pr 140.907 82 Lead, Pb 207.2
60 Neodymium, Nd 144.24 83 Bismuth, Bi 208.980
61 Promethium, Pm (144) 84 Polonium, Po (210)
62 Samarium, Sm 150.4 85 Astatine, At (218)
63 Europium, Eu 152.0 86 Radon, Rn (222)
64 Gadolinium, Gd 157.25 87 Francium, Fr (223)
65 Terbium, Tb 158.92 88 Radium, Ra (226)
66 Dysprosium, Dy 162.50 89 Actinium, Ac (227)
67 Holmium, Ho 164.93 90 Thorium, Th (232)
68 Erbium, Er 167.26 91 Protactinium, Pa (231)
69 Thulium, Tm 168.93 92 Uranium, U (238)
70 Ytterbium, Yb 173.04 93 Neptunium, Np (239)
71 Lutetium, Lu 174.97 94 Plutonium, Pu (239)
72 Hafnium, Hf 178.49 95 Americium, Am (243)
73 Tantalum, Ta 180.95 96 Curium, Cm (245)
74 Tungsten, W 183.85 97 Berkelium, Bk (247)
75 Rhenium, Re 186.2 98 Californium, Cf (249)
76 Osmium, Os 190.2 99 Einsteinium, Es (254)
77 Iridium, I 192.2 100 Fermium, Fm (253)
78 Platinum, Pt 195.09 101 Mendelevium, Md (255)
79 Gold, Au 196.97 102 Nobelium, No (255)
80 Mercury, Hg 200.59 103 Lawrencium, Lr (257)
81 Thallium, Tl 204.37

Atomic masses of a few selected isotopes

Atomic Atomic Atomic Atomic


Name Name
number mass / u number mass / u
1 Hydrogen, H 1.007 825 7 Nitrogen-14 14.003 074
1 Deuterium, D 2.014 102 7 Nitrogen-15 15.000 109
1 Tritium, T 3.016 049 8 Oxygen-16 15.994 915
2 Helium-3 3.016 029 8 Oxygen-17 16.999 131
2 Helium-4 4.002 603 8 Oxygen-18 17.999 160
3 Lithium-6 6.015 121 19 Potassium-39 38.963 708
3 Lithium-7 7.016 003 19 Potassium-40 39.964 000
4 Beryllium-9 9.012 182 92 Uranium-232 232.037 14
5 Boron-10 10.012 937 92 Uranium-235 235.043 925
5 Boron-11 11.009 305 92 Uranium-236 236.045 563
6 Carbon-12 12.000 000 92 Uranium-238 238.050 786
6 Carbon-13 13.003 355 92 Uranium-239 239.054 291
6 Carbon-14 14.003 242

Masses of elements and selected isotopes


Useful formulae and astronomical data

Useful formulae
Property Formula

Circumference of a circle of radius R 2πR

Area of a circle of radius R πR2

Surface area of a sphere of radius R 4πR2

Volume of a sphere of radius R 4πR3


3
Volume of a cylinder of base radius R
πR2h
and height h

Astronomical data
Orbit radius / m
Body Mass / kg Radius / m Orbital period
(average)

Sun 1.99 3 1030 6.96 3 108 – –

Moon 7.35 3 1022 1.74 3 106 3.84 3 108 27.3 days

Mercury 3.30 3 1023 2.44 3 106 5.79 3 1010 88.0 days

Venus 4.87 3 1024 6.05 3 106 1.08 3 1011 224.7 days

Earth 5.98 3 1024 6.38 3 106 1.50 3 1011 365.3 days

Mars 6.42 3 1023 3.40 3 106 2.28 3 1011 687.0 days

Jupiter 1.90 3 1027 6.91 3 107 7.78 3 1011 11.86 yr

Saturn 5.69 3 1026 6.03 3 107 1.43 3 1012 29.42 yr

Uranus 8.66 3 1025 2.56 3 107 2.88 3 1012 83.75 yr

Neptune 1.03 3 1026 2.48 3 107 4.50 3 1012 163.7 yr

Pluto* 1.5 3 1022 1.15 3 106 5.92 3 1012 248.0 yr


Luminosity of the Sun L = 3.9 3 1026 W
Distance to nearest star (Proxima Centauri) 4 3 1016 m (approx. 4.3 ly)
Diameter of the Milky Way 1021 m (approx. 100 000 ly)
Mass of the Milky Way 4 3 1041 kg
Distance to nearest galaxy (Andromeda) 2 3 1022 m (approx. 2.3 million ly)
* Pluto has recently been downgraded into a new category of ‘dwarf planet’ (see Option E,
Astrophysics).

Physics for the IB Diploma


Answers to Test yourself questions

Topic 1: Physics and physical 7 Plot ln d against ln h to get a straight line with slope 0.8 and
measurement vertical intercept ln c, or d against h0.8, or d1.25 against h. Last two
give straight lines through the origin.
−2
[F]
1 [η] = = kg m s = kg m−1 s−1.
[6πrv] m m s−1
8 a 5.344 ± 0.001
Et2 b One possibility is 67 ± 5 which is too conservative. As
2 The quantity has units
ρ mentioned earlier someone may well claim to be able to read
⎡ Et ⎡ = J s = N m s2 = kg m s−2 m s2 = m5 from
2 2
to better precision, so a better answer is 67 ± 2.
⎣ ρ ⎣ kg m−3 kg m−3 kg m−3
which the result follows. Solving for the energy we 9 a Since r2 is proportional to V the graph will be a straight line
R5ρ
= 140 × 21 ≈ 9 × 1013 J.
5
get E ≈ through the origin.
t2 0.025
2m
b The slope is 2 .
qB
3 The percentage uncertainty in the resistance is Δr2 Δr
ΔR c We have that 2 = 2 ⇔ Δr2 = 2rΔr. For the value
= 4% + 6% = 10% and so ΔR = ±10% × 24 = ± 2.4 Ω ≈ ±2 Ω. r r
R r = 4.5 we thus have r2 = 4.52 = 20.2 ≈ 20 cm2 to 2 s.f.
1 Δr2 = 2 × 4.5 × 0.1 = 0.9 cm2 to 1 s.f. The least uncertain digit in
Give the uncertainty to 1 s.f. the value of r2 is in the units digit and so the uncertainty must
express this fact. Hence the uncertainty must be rounded to
4 Since V = a3 the fractional uncertainty is 3 × 0.02 = 0.06 or 6%. the units digit i.e. Δr2 = 0.9 ≈ 1 cm2. Hence r2 = 20 ± 1 cm2. In the
same way we can fill in the rest of the table.
ΔT 1
5 The percentage uncertainty is = × (4% + 6%) = 5%. Radius r / cm ±0.1 cm Potential difference V / V r2 / cm2
T 2
4.5 500 20 ± 1
1
The common mistake is to say that the uncertainty is 4.9 600 24 ± 1
(4% + 6%) ≈ 3%. 5.3 700 28 ± 1
5.7 800 32 ± 1
6
6.0 900 36 ± 1
Equation Constants Variables Gradient Vertical
intercept

P = kT k P against T k zero 1
v = u + at u, a v against t a u In this example the absolute uncertainties in all the values of
r2 come out the same. This is not generally the case.
v2 = 2as a v2 against s 2a zero
kq1q2 k, q1, q2 1 kq1q2 zero
F= F against d & e The error bars and the line of best fit and the minimum and
r2 r2
maximum slope lines are shown in the diagram.
a = – ω 2x ω2 a against x −ω2 zero
r2 / cm2
kq k, q 1 kq zero
V= V against 40
r r
4π2 3 G, M T2 against R3 4π2 zero
T =
2
R 35
GM GM
I = I0e –aT I0 , a ln I against T −a ln I0 30
λ= h h, m, q λ against 1 h zero
2mqV V 2mq 25
1 h2 zero
λ2 against V 2mq 20
F = av + bv2 a, b F b a
v against v 15 V/V
400 600 800 1000
1 m, ω , A 2 2
E against x 2
−m ω 2 4
mωA 2 4 2
E= mω 2 A2 – x2
2 4 4
1 1=1 f 1 1 −1 1
+
u v f u against v f

Answers to Test yourself questions


194

f The gradient of the line of best fit is 16 A glass contains about 200 g of water. The molar mass of water
(36 − 20) × 10−4 200 200
≈ = 10 moles.
= 4.00 × 10−6 m2 V−1. is 18 g per mole and so 200 g correspond to
18 20
400
Each mole contains 6.02 × 10 molecules, so the glass contains
23
The gradient of the maximum slope line is
6 × 1023 × 10 ≈ 1025 molecules of water.
(37 − 19) × 10−4
= 4.50 × 10−6 m2 V−1.
400 T4
17 We know that I ∝ and so the percentage increase in the
The gradient of the minimum slope line is d2
(35 − 21) × 10−4 intensity received would increase by 4 × 2% + 2 × 1% = 10%.
= 3.50 × 10−6 m2 V−1.
400
The uncertainty in the gradient is therefore Topic 2: Mechanics
4.50 × 10−6 − 3.50 × 10−6
= 0.50 × 10−6 ≈ 0.5 × 10−6 m2 V−1 to 1 s.f.
2 1 See the graph.
We therefore quote the gradient as (4.0 ± 0.5) × 10−6 m2 V−1. d
2m
g The slope is equal to 2 and so
qB
q 2 2
= = = 1.54 × 1011 C kg−1.
m B2 × slope (1.80 × 10−3)2 × 4.0 × 10−6
q
Let U be the uncertainty in the measured value of . Then
m
U 0.5 × 10−6 0
= ⇒ U = 0.193 × 1011 ≈ 0.2 × 1011 C kg−1. 0 t
1.54 × 1011
4.0 × 10−6
1
1
No calculations are needed here – just use common sense
The uncertainty is in the first decimal place and so the
q about how the magnitude of the displacement changes as
measured value of m must be rounded to the first decimal the particle moves.
q
place. Hence we must quote m = (1.5 ± 0.2) × 1011 C kg−1.
2 The change of displacement is the vector shown in the diagram.
10 The speed of the boat with respect to the shore is 4.02 − 3.02
= 2.646 m s−1 and the time taken to get across is 16 = 6.0 s.
2.646

16 m
It has magnitude 10 m and so the average velocity is
10
v= = 2.0 m s−1 in the direction of the arrow.
5.0 1
The distance travelled is × 2πR ≈ 15.7 m and so the average
15.7 2
11 The mass of an apple is about 200 g so its weight is about speed is = 3.1 m s−1.
0.2 × 10 ≈ 2 N. 5.0
3 Use s = ⎛⎝ u + v ⎞⎠ t, to get 20 = ⎛⎝ 0 + v ⎞⎠ × 5.0 ⇒ v = 8.0 m s−1 (C).
12 The number of seconds in a year is of the order 365 × 24 × 60 × 60 2 2
100 100
≈ 400 × 20 × 50 × 50 ≈ 400 × 20 × × ≈ 102 × 20 × 104 ≈ 2 × 107. 4 a The acceleration at 2.0 s is the slope of the curve at this point.
2 2
So the distance travelled by light in a year (= a light year) is of the Drawing a tangent and finding its slope gives approximately
order ≈ 3 × 108 × 2 × 107 ≈ 6 × 1015 m. 0.14 m s−2.

1
13 The diameter of a nucleus is of the order 10−15 m. Thus the time A common mistake would be to divide the velocity at 2.0 s
taken by light to cross the diameter of a nucleus is of the order by the time of 2.0 s.
10−15
= 0.33 × 10−23 ≈ 3.3 × 10−24 ≈ 10−24 s.
3 × 108
b See the graph.
14 You should know that the heart beats at a rate of about 70 beats
a / m s–2
60
per minute. Thus the interval between beats is ≈ 1 s. 1.0
70
15 The radius of the Earth is 6400 km and so the volume 0.8
of the Earth is about 0.6
4π 4 × 3 × (6 × 106)3
(6.4 × 106) m3 ≈ ≈ 4 × 6 × 40 × 1018 ≈ 1021 m3.
3 3 0.4
The volume of a grain of sand is about 1 mm3 and so the number
of grains of sand that can fit into the Earth is 0.2
2 × 1021 m3 2 × 1021 (103 mm)3
≈ ≈ 2 × 1030 ≈ 1030. 0 t/s
1 mm3 1 mm3 0 1 2 3 4 5 6

Physics for the IB Diploma


195

c The area under the curve is approximately 5.0 m and this is the
displacement. F = 60 N
24 N

5 The area under the curve is the change in velocity. This is 25 m s−1. 8 kg 12 kg
Since the initial velocity is zero the final velocity is then 25 m s−1. The forces are now as shown in the diagram and we have
equilibrium.
6 The answer must be the same time! Explicitly, let h be the height Using the diagram we calculate that d the tension is 24 N and
from the floor and let t be the time to hit the floor. Let u be the e the frictional force on the 12 kg block is 60 − 24 = 36 N.
downward velocity of the elevator. Then, for an observer outside,
1
the ball will cover a distance h + ut (the floor will move down a
1 Equilibrium means the net force on each body is zero.
distance ut) and so h + ut = ut + gt2 (the ball has an initial velocity
2 1
equal to that of the elevator) and so h = gt2, the result we would 10 The scale exerts a force R on the girl. Hence by Newton’s third
2
get for an elevator at rest. law, the girl exerts a force R on the scale which is what the scale
1 reads. The answer is C.
It is unlikely that you would reproduce this argument in an 1
exam – use common sense: it makes no difference whether The common mistake would be to choose B, but scales read
the elevator is moving or not since an observer inside the force on them!
cannot know that he or she is moving! (If u is constant.)
11 The forces on the block are as shown in the diagram.
7 See the diagram. M N
T
Net force on m is mg − T and so T
mg − T = ma. Net force on
M is T and so T = Ma. Thus: m
mg − T = ma mg θ
T = Ma
Hence, by adding these equations, We must take components along horizontal and vertical
mg = (M + m)a and so axes (because motion takes place horizontally). The vertical
mg
mg Mmg component of N is N cos θ and this must equal the weight of the
a= and T = .
M+m M+m block, mg. The horizontal component is N sin θ and this must
The advantage of considering the two bodies as one is that the equal ma. So,
net force is then mg and so right away the acceleration is N sin θ = ma
mg
mg = (M + m)a ⇒ a = . You now treat the bodies as separate N cos θ = mg
M+m a
again to find the tension. This gives tan θ = . Treating the bodies as one, we see that the
g F
net force is just F and so the acceleration is a = where M is the
8 The tension in D pulls a bigger mass and so this has the greatest M
F F
tension. combined mass. Hence tan θ = = as required.
Mg W
1
9 a Treating the two bodies as one we see that the total mass is
It is always a good idea to choose as one of the axes the
20 kg and the net force 60 N so that the acceleration is 3.0 m s−2.
direction of motion.
b The net force on the 8.0 kg body is the tension in the string
and so T = ma = 8.0 × 3.0 = 24 N.
c If the bodies are reversed, the acceleration will stay the same 12 The body is accelerating upwards so R is bigger than mg. The net
but the tension will now be T = ma = 12 × 3.0 = 36 N. force is thus R − mg and so R − mg = ma, i.e. R = ma + mg.
1
No further calculations are needed for c – since the total 13 a Δp = 0.20 × 2.5 − 0.20 × ( −4.0 ) = 1.3 N s to the right.
notice the sign
mass is the same the acceleration will be the same. Δp 1.3
b F= = = 9.3 N.
Δt 0.14
c If the system is just the ball the law does not apply since there
is a force on the block from the wall. If the system is the ball
and the wall, then it does apply. The wall must have acquired
a momentum of 1.3 N s to the left.
1
It all depends on what the system is taken to be.

d The net force on the ball is now F = R − mg and


Δp
so F = = R − mg giving R = 9.3 + 2.0 ≈ 11 N.
Δt

Answers to Test yourself questions


196

14 a The force exerted on the gases is 2.2 × 3.0 × 102 = 660 N. 2 The change in temperature is 10 K and the final temperature is
b By Newton’s third law this is also the force acting on the 32 + 273 = 305 K.
rocket and so it accelerates.
c The initial mass of the rocket is 200 kg so the initial 3 Let T be the final temperature. Then:
acceleration is a =
660
= 3.3 m s−2. thermal energy lost by aluminium is 0.080 × 900 × (250 − T).
200 thermal energy gained by water and calorimeter is
15 a About 2.0 ms. 0.75 × 4200 × (T − 15) + 180 × (T − 15).
b The area is (by counting squares) about 95 × 10−3 N s. By conservation of energy we have
c The average force is given by FΔt = 95 × 10−3 N s, i.e. F = 48 N. 0.08 × 900 × (250 − T) = 0.75 × 4200 × (T − 15) + 180 × (T − 15).
d The impulse is also mv − m(−v) = 2mv and so m = 5.3 × 10−3 kg. Solving for T we find T = 20 °C.
1
16 The work is W = Fd cos θ with θ = 0° and so Save time by not doing any arithmetic – just put the
W = 20 × 2π × 5.0 ≈ 630 J. equation in the SOLVER of your GDC.
1
The common mistake is to say that the work is zero because
4 a It takes 140 s to warm the paraffin from 20 °C to 48 °C and
the displacement is zero.
Δθ 28
so P = mc = 0.120 × 2500 × = 60 W.
Δt 140
1 2
17 Since EE = kx to extend the spring from its natural length to b The constant temperature at which paraffin melts is 48 °C.
2
an extension 2e would require work equal to 4W. So to extend it c It takes the paraffin 560 − 140 = 420 s to melt. The energy
from e to 2e requires 4W − W = 3W, hence C. provided is Q = Pt = 60 × 420 = 25 000 J and so the specific
Q 25200
latent heat of fusion is L = = = 2.1 × 105 J kg−1.
m 0.120
18 The total momentum before the collision is
d It takes an additional 600 − 560 = 40 s to warm liquid
5.0 × 3.0 + 7.0 × 0 = 15 N s. After the collision it is (5.0 + 7.0) × v.
paraffin at 48 °C to a temperature of 58 °C and so
Thus 12v = 15 N s ⇒ v = 1.25 m s−1. The total kinetic energy before
Δθ 58 − 48
1 P = mc = 0.120 × c ×
the collision is EK = 5.0 × 3.02 + 0 = 22.5 J. After the collision it Δt 40
2
1 60 × 40
is EK = 12 × 1.252 = 9.4 J . The collision is inelastic since kinetic ⇒c= = 2.0 × 103 J kg−1 K−1.
2 10 × 0.120
energy has not been conserved. e The temperature stays constant even though energy is
provided because the energy is used to separate the molecules,
19 The change in the kinetic energy of the body is thus increasing their intermolecular potential energy. No
ΔEK = 0 − 48 = −48 J. The only force doing work on the body energy transfers into kinetic energy and so the temperature
is the frictional force and Wnet = f × d × cos180° = −6.0 × d. does not change.
Hence −6.0 d = −48 ⇒ d = 8.0 m. 1
For the non-flat sections of the graph, the gradient
20 The block is moving in a circle (of radius L) and so is not in Δθ
is . Now the power supplied is P and so
equilibrium. The net force points towards the centre, i.e. upwards. Δt
Δθ P
This means that the tension is larger than the weight. Applying P = mc ⇒c= .
Δt Δθ
v2 m
Newton’s second law: T − mg = m . So to find the tension we Δt
L
need the speed of the block. Applying conservation of energy, Assuming P is constant, the larger the slope the smaller the
1 2 v 2 specific heat capacity.
mv = mgL and so m = 2mg leading, finally, to T = 3mg.
2 L
5 The average molecular speed stays the same since the
1 temperature is constant. But since the volume decreases, the
Equilibrium means the body moves in a straight line with frequency of collisions will increase because molecules have
constant speed – this is not the case here. a shorter distance to cover in between collisions. Hence the
pressure increases.
Topic 3: Thermal physics
6 The average molecular speed increases since the temperature
1 Consider a mole of lead. Its mass is 207 g (0.207 kg). increases. Hence the pressure will go up. But in addition, with
0.207 a higher speed the frequency of collisions will increase as well:
The volume of one mole is therefore = 1.83 × 10−5 m3
1.13 × 104 hence the pressure increases further.
(density = mass/volume). Since we have one mole we have
6.02 × 1023 molecules of lead. Thus to each molecule there
1.83 × 10−5
corresponds a volume = 3.04 × 10−29 m3. Assuming
6.02 × 1023
this volume to be a cube, we find that the cube side is
a = 3 3.04 × 10−29 ≈ 3 × 10−10 m and this is also the average
separation of the molecules (see diagram in the question).

Physics for the IB Diploma


197

Topic 4: Oscillations and waves c Many examination questions play this trick. It is the angle
between the ray and the normal that you want, i.e.
1 a Yes, since acceleration is opposite and proportional to 90° − 50° = 40°, so watch out!
displacement. Then 1 × sin 40° = 1.33 sin θ2 ⇒ sin θ2 ⇒ 0.483 ⇒ θ2 = 29°.
b No, since acceleration is in the same direction as displacement.
c No, since acceleration is not proportional to displacement. 7 The path difference at P is S2P − S1P = 0.60 m and since
S2P − S1P 0.60 2
2 a The graph is a straight line through the origin with negative = = , we will have constructive interference
λ 0.30 integer
slope so it satisfies the defining equation for SHM, at P. (At a point that is equidistant from the sources, the path
i.e. a = −ω2x. difference is zero and so we have constructive interference.)
b From the graph, the slope is approximately S Q − S1Q 0.45 1.5
−5.7 − 5.7 At Q, S2Q − S1Q = 0.45 m and since 2 = = ,
≈ −38 s−2. This equals −ω2 and so λ 0.30 half integer
15 × 10−2 − (−15 × 10−2)
2π 2π we will have destructive interference at Q.
ω ≈ 6.2 s−1. Hence T = = = 1.0 s.
ω 6.2
c The maximum velocity is v = ωx0 ≈ 6.2 × 0.15 = 0.93 m s−1. 1
You must not calculate the slope or the inverse slope.
3 a The maximum kinetic energy is 0.32 J and so
2 × 0.32
Emax = 1 mω2x02 = 0.32 ⇒ ω = = 8.0 s−1. Topic 5: Electric currents
2 0.25 × (0.20)2
2π 2π
Hence T = = = 0.79 s.
ω 8.0 1 When the voltage is 0.30 V the current is 1.1 A and so
b The maximum speed is vmax = ωx0 = 8.0 × 0.20 = 1.6 m s−1. R= =
V 0.30
= 0.27 Ω.
The maximum acceleration is amax = ω2x0 = 8.02 × 0.20 ≈ 13 m s−2. I 1.1
c See graph. V2 V2 2402
2 Using P = we find R = = = 960 Ω. The new voltage is
R P 60
E / mJ 60
potential half the original and so P = = 15 W.
300 4
250
3 a If the radius doubles the cross-sectional area increases by a
200 1 1
factor of 22 = 4 and so the resistance becomes × 2 = times
150 4 2
as large, i.e. half the size.
100 b Each piece will have resistance 2R. Hence the combination has
50 resistance 4R.
kinetic
x / cm
–20 –10 0 10 20
4 The work required to push one electron through the resistor is
d From the graph, x ≈ ±14 cm. W = qV and so 7.2 × 10−19 = 1.6 × 10−19 V giving V = 4.5 V.
5.0 The potential difference across the internal resistor is
4 a The car hits a bump every = 0.417 s, i.e. with a frequency of 0.80 × 1.4 = 1.12 V and so the emf is 4.5 + 1.12 = 4.6 V.
12
2.4 Hz. The natural frequency of the oscillations of the car must
also be about 2.4 Hz so that resonance occurs. This means that 5 a We have the top two resistors in series for a total of 120 Ω
the amplitude of oscillations will be large. At a different speed, and this is in parallel with the bottom 60 Ω for a grand
the frequency with which the bumps are hit is different from total resistance between points A and B of
the natural frequency and so the amplitude is small. 1 1 1
+ = ⇒ RT = 40 Ω.
120 60 40
b The bottom resistor must have burned out so it is effectively
b ω = 2πf = 2π × 2.4 ≈ 15 s−1
not there.
5 The point executes SHM and so v = ω x02 − y2 .
2π 2π 6 a The potential difference across the 25 Ω resistor is
We know that ω = = = 1.57 × 103 s−1 and since 25 × 0.20 = 5.0 V and this is also the p.d. across R2.
T 4.0 × 10−3
for x = 0.8 cm y = 0.7 cm, we have that 5.0
Hence R2 = = 8.3 Ω.
0.60
v = ωx0 = 1.57 x 103 × (12 × 10−3)2 − (7 × 10−3)2 ≈ 15 m s−1. b The current through R1 is 0.80 A and the p.d. across it is
(Notice that this is different from the speed of the wave. The 7.0
12 − 5.0 = 7.0 V. Hence R1 = = 8.8 Ω.
1 0.80
period is 4.0 ms. The frequency is then f = = 250 Hz.
4.0 × 10−3
The speed is v = fλ = 250 × 2.0 × 10−2 = 5.0 m s−1.) 7 a We have two resistors in series for a total of 6.0 + 6.0 = 12 Ω
and this is in parallel with the bottom resistor for a total of
3.0 × 108
6 a 1.33 = ⇒ v = 2.3 × 108 ms−1. 1
+
1
=
3
⇒ RT = 4.0 Ω and in turn this is in series with the
v 12 6.0 12
b The frequency of light must stay the same and so internal resistor for a grand total of 4.0 + 2.0 = 6.0 Ω.
λair
λwater = = 406 nm. b If the bottom resistor burns out the total becomes
1.33 6.0 + 6.0 + 2.0 = 14 Ω.

Answers to Test yourself questions


198

8 a The lamps are in series so they take the same current. 3 D: The force will always be attractive. If Q is positive, there will be
Since P = RI2 it follows that lamp A has the greater resistance. negative charges near it and positive charges further away leading
b The lamps are in parallel so they have the same potential to attraction. If Q is negative, it will push negative charges in the
difference across them. Hence the convenient power formula sphere away leaving positive charges nearby again leading to
V2 attraction.
is P = . Lamp B has the smaller resistance and so the
R
greater power.
4 The answer is C. This comparison type problem is best solved as
1 1 1 follows.
9 The total resistance of the circuit is + = ⇒ RT = 6.0 Ω and
12 12 6
12 EITHER: write the equation for the gravitational field strength for
so the current leaving the battery is I = = 2.0 A. The current in
6.0 GM GMP
the Earth: g = . Do the same for the planet: gP = .
the top 4.0 Ω resistor is then 1.0 A and the p.d. across it is R2 RP2
GMP
4.0 × 1.0 = 4.0 V. So the potential at the top end of the voltmeter is
RP2
12 − 4.0 = 8.0 V. Similarly, the current in the bottom 8.0 Ω resistor g
Divide side by side: P =
M R2
= P
1 1
= 2× 2 = .
is 1.0 A and the p.d. across it is 8.0 × 1.0 = 8.0 V. So the potential at g GM M RP2 2 2
the bottom end of the voltmeter is 12 − 8.0 = 4.0 V. The p.d. across g R2
Then gP = ,
the voltmeter is then 4.0 V. 2
GMP G(2M) 2 GM 1
OR: write gP = = = = g.
10 The total resistance of R1 + R2 = 100 Ω and R = 5.0 Ω is RP2 (2R)2 4 R2 2
1 1 21
+ = ⇒ RT = 4.76 Ω. This is in series with the internal
100 5.0 100 1
resistance and so the overall total resistance of the circuit is
12 Common mistake: the denominator contains (2R)2 which
RT = 2.0 + 4.8 = 6.8 Ω. The current is then I = = 1.8 A and so the gives 4R2 and not 2R2.
6.8
reading of the voltmeter is V = 12 − 1.8 × 2.0 = 8.4 V.

V2 V2 36 5 The answer is B by considering forces on a positive charge at the


11 a From P = we find R = = = 3.0 Ω. centre and adding the four forces as vectors.
R P 12
P 12
b From P = VI we get I = = = 2.0 A. 6 See diagram (marks for direction of arrows, normal to sphere, no
V 6.0
c The p.d. across wire AB is 6.0 V and so the p.d. across BC is lines inside conductor).
also 6.0 V. Since the resistance of AB is double that of BC, the
current in BC is double that in AB. Let x stand for the current
in AB. Then, x + 2.0 = 2x and so x = 2.0 A. The resistance of
6.0
AB is then RAB = = 3.0 Ω and so RAC = 4.5 Ω.
2.0
12 a When the temperature is increased the resistance of T will
decrease. Therefore the potential difference across T will
decrease as well. We can see this as follows: think of the circuit
as a potential divider. Since the resistance of T is less than R
and the current in T and R is the same the potential difference
drops.
b The LDR will decrease in resistance as the light gets brighter
and so the answer is the same as in a.
7 Applying the right hand grip rule, the answer is D.
Topic 6: Fields and forces
GMm
1 20 = . Hence at the new position,
R2
GMm 1 GMm
W= = = 5.0 N.
(2R)2 4 R2
Mm
2 The force on the Earth is F = G 2 and so
2 2
r
Mm mv vr
G 2 = ⇒ M = . The Earth moves a distance 2πr in one
r r G
2πr 2π × 1.5 × 1011
year and so v = = = 2.99 × 104 m s−1. Hence
T 365 × 24 × 60 × 60
v2r (2.99 × 104)2 × 1.5 × 1011
M= = = 2.0 × 1030 kg.
G 6.67 × 10−11

Physics for the IB Diploma


199

Topic 7: Atomic and nuclear physics b The binding energy of polonium is 218 × 7.8 ≈ 1700 MeV,
that of helium 4 × 7.2 ≈ 29 MeV and that of lead
1 a It must be narrow to make the determination of the scattering 214 × 7.9 ≈ 1690 MeV. The energy released is then about
angle measurable. 29 + 1690 − 1700 = 19 MeV.
b It must be very thin in order to avoid absorption of the
1
alpha particles by the foil and also in order to avoid multiple
You must find the total binding energy, not just the binding
scatterings.
energy per nucleon.
2 Alpha particles from a radioactive source were directed at a thin
gold foil and their scattering was studied. 9 C: There are 11 nucleons in 115B and so the energy
Most of the alpha particles went through the gold foil essentially is 11 × 7.0 = 77 MeV.
undeflected or suffered very small deflections. The deflection was
due to the electric force of repulsion between the positive charge 10 The total mass on the left is 18.005 67 u and is smaller than the
of the alpha particles and the positive charge of the atom. The total on the right of 18.006 96 by 0.001 29 u. The naïve answer is
small deflections meant that the alpha particles never got very that the missing energy of 0.00129 × 931.5 = 1.20 MeV must be
close to the positive charge of the atom. provided by the alpha particle’s kinetic energy.
Very rarely, however, alpha particles suffered large angle 1
deflections. The force required to cause these deflections meant Because momentum must be conserved, however, the
that the alpha particles had to get very close to the positive charge alpha’s kinetic energy must in fact be somewhat larger.
of the atom, i.e. the positive charge was located in a tiny volume.
This was the nucleus of the atom that contained the atom’s
positive charge and most of its mass. The rest of the atom was Topic 8: Energy, power and climate
empty space. change
3 × 108 1 The power that must be provided by nuclear fission is
3 Using ΔE = hf we find 1.9 × 1.6 × 10−19 = 6.63 × 10−34 × and so
λ 400
= 1000 MW. The number of reactions per second
λ = 6.5 × 10−7 m. 0.40
1 must be N × 200 × 106 × 1.6 × 10−19 = 1000 × 106 and so
1000 × 106
You must convert the eV into joules. N= = 3.1 × 1019 s−1. In a single reaction a mass
200 × 106 × 1.6 × 10−19
of 235 u or 235 × 1.66 × 10−27 = 3.9 × 10−25 kg is used. Hence the mass
p2 used per second is 3.1 × 1019 × 3.9 × 10−25 = 1.2 × 10−5 kg s−1. In one
KEα 2mα mPb 214 year we need 1.2 × 10−5 × 365 × 24 × 3600 ≈ 380 kg.
4 = = = = 53.5 since the momenta are equal
KEPb p2 mα 4
2mPb 2 The rate at which thermal energy is lost is
ΔQ Δθ
and opposite. = mc = 220 × 4200 × 3.5 × 10−3 = 3234 W. This must be
Δt Δt
provided by sunlight. If the area is A then the power supplied is
12 days correspond to 3 half-lives and so the activity is ⎛⎝ 1⎞⎠ = ⎛⎝ 1⎞⎠
3
5
2 8 640 × A and so 640 A = 3234 ⇒ A = 5.1 m2.
of the original.
3 From the formula, we have simply
6
P = 1 ρAv3 = 1 × 1.2 × π × ⎛⎝ 12⎞⎠ × 8.03
Time / min X Y Y/X 2

0 1 0 0 2 2 2
= 35 kW.
1 1
2.0 1 50 × 103
2 2 The number of windmills needed is = 143.
35
1 3 This is a large number and in practice even more would
4.0 4 4 3
be needed.
1 7
6.0 8 8 7 1
Doubling the windmill area doubles the power extracted but
So 6.0 minutes must go by.
doubling the wind speed increases the power (in theory)
by a factor of eight. Frictional and other losses (mainly
7 C, there is a 50% chance of decaying in any half-life interval.
turbulence) result in a smaller power increase in practice.
8 a The energy released is given by Q = (MPo − (MPb + MHe))c2 . The calculations above also assume that all the wind is
Now, actually stopped by the windmill, extracting all of the wind’s
kinetic energy, which is impossible – there would be no air-
B.E.Po = (84mp + 134mn − MPo)c2 ⇒ MPoc2 = (84mp + 134mn)c2 − B.E.Po
flow in that case! In addition, the calculation assumes that
B.E.Pb = (82mp + 132mn − MPb)c2 ⇒ MPbc2 = (82mp + 132mn)c2 − B.E.Pb
the wind impacts the blades of the turbine at right angles,
B.E.He = (2mp + 2mn − MHe)c2 ⇒ MHec2 = (2mp + 2mn)c2 − B.E.He.
which is not always the case unless the windmill can be
Hence, Q = B.E.Pb + B.E.He − B.E.Po.
turned into the wind.
This shows that the energy released is the difference between
the total binding energy of the products and the binding
energy of the decaying nucleus.
Answers to Test yourself questions
200

4
P 1 1
= ρgA2v = × 103 × 9.8 × 1.52 × 4.0 = 44 kW m−1. Hence, from a Topic 9: Motion in fields
L 2 2
wavefront of length 5.0 m we get a power of P = 5.0 × 44 = 220 kW. 1
1 The body will fall a vertical distance of 12 m and so from y = gt2,
1 2
Q ACSΔT 12 = × 9.8t2 giving t = 1.56 s. The horizontal distance travelled in
5 From Q = ACSΔT we have that P = = and so the net 2
Δt Δt this time is then x = vt = 15 × 1.56 = 23 m.
P C ΔT (I − I )Δt
intensity is Iin − Iout = = S . Hence ΔT = in out .
A Δt CS 2 Since the gravitational potential is the sum of the potentials from
(800 − 0.2 × 800) × 2 × 30 × 8 × 24 × 3600 each mass separately and since it is negative we must choose the
Thus, ΔT = = 13 K.
8.7 × 107 point that involves the largest distances from the masses, i.e. D.
The two main assumptions are that all the water is heated
uniformly, and that there is no cooling of the water during the
3 All points on the x-axis are equidistant from a ± vertical pair of
night.
charges and so the potential due to those charges is zero. Hence
the answer is B.
6 a The power received by 1 square metre of the Earth’s surface
S S
(A = 1 m2) is Pin = (1 − α) A = (1 − α) . This is because a 4 a The gravitational potential at the mid-point is
S 4 4
power α A has been reflected back into space. The Earth V=−
GM GM
− =−
2GM
and so the work done to bring
4 d d d
radiates power from the entire surface area of its spherical 2GMm
the little mass there from infinity is W = mV = − .
shape and so the power radiated from 1 square metre (by the d
b The potential at the new position is
Stefan–Boltzmann law) Pout = σT4. (We are using an emissivity
GM GM 8GM
of 1 for the Earth’s surface. Of the 30% of the reflected V =− − =− . Hence the work required
3d/2 d/2 3d
radiation only about 4% to 5% is reflected from the surface
is W = mΔV = m⎛⎝ − 8GM − ⎛⎝ − 2GM ⎞⎠ ⎞⎠ = −
2GMm
itself and so the emissivity is about 0.96 to 0.95.) Equating the .
3d d 3d
S
two: (1 − α) = σT4 ⇒ (1 − α)S = 4σT4.
4 5 The field is directed from high to low potential and it gets
b We find T = 4 (1 − α)S , i.e. T = 4 (1 − 0.30) × 1400 ≈ 256 K. stronger as we move to the right. This means that the
4σ 4(5.67 × 10−8)
equipotential lines must get closer as we move to the right. Hence
This temperature is −17 °C.
the answer is D.
c A temperature of 256 K is 32 K lower than the Earth’s average
temperature of 288 K and so obviously the model is wrong. 9 × 109 × (1.6 × 10−19)(−1.6 × 10−19)
6 EP = = −1.2 × 10−18 J.
One reason this model is too simple is precisely because we 2.0 × 10−10
have not taken into account the fact that not all the power 1
7 a The change in potential is 90 V and so from mv2 = qΔV
radiated by the Earth actually escapes. Some of the power is 2
2qΔV 2 × 1.6 × 10−19 × 90
absorbed by the gases in the atmosphere and is re-radiated we get v = = = 1.3 × 105 m s−1.
back down to the Earth’s surface, causing further warming m 1.67 × 10−27
that we have neglected to take into account. In other words, b At infinity the potential is zero and so the change in
this model neglects the greenhouse effect. potential is 180 V i.e. double the change in a.
Another drawback of the simple model presented above is that Hence v∞ = 2 × 1.3 × 105 = 1.8 × 105 m s−1.
the model is essentially a zero-dimensional model – the Earth c v
is treated as a point without interactions between the surface
and the atmosphere (latent heat flows, thermal energy flow in
oceans through currents, thermal energy transfer between the
surface and the atmosphere due to temperature differences
between the two, are all ignored). Realistic models must take
all these factors (and many others) into account and so are
very complex.

7 The total volume of water in the oceans is approximately


V = A × 3.7 × 103 where A is the surface area of the oceans. The 0 r
0
increase in volume is then ΔV = γV0Δθ = 2 × 10−4 × A × 3.7 × 103 × 2. GMm 6.67 × 10−11 × 6.0 × 1024 × 3500
8 EP = − =− = −2.0 × 108 J.
This means that the sea level will increase by an amount h such r (6400 + 520) × 106
that A × h = A × 1.48, i.e. h ≈ 1.5 m.
9 a By drawing a tangent line at r = 2.0 × 106 m and measuring its
This answer assumes uniform heating of all the water, which
gradient we get approximately g = 25 N kg–1.
is unlikely. It ignores the anomalous expansion of water (the
volume decreases for temperatures in the range of 0 °C to 4 °C).
b W = mΔV = 350 × (–0.5 × 108 – (–2.0 × 108)) = 5.2 × 1010 J.
It assumes that γ is constant. It ignores the cooling that would
take place because with a higher temperature there would be
c The additional work involves the kinetic energy of the probe
more evaporation. Finally, the extra volume of water might cover 1 1 GMm 1
previously dry land and so the expected increase in sea level when it is in orbit. This is EK = mv2 = = − mV
1 2 2 r 2
would be less. = × (0.5 × 108) × 350 = 8.8 × 109 J.
2

Physics for the IB Diploma


201

vesc 1 2GM
10 The launch speed is v = = and so by energy 9 a AB is the isothermal since it is less steep than the adiabatic CA.
2 2 R
conservation, with r being the distance the probe gets to, b B to C because the work done is negative (on the gas) and
1 GMm GMm the temperature drops so that ΔU < 0. Since Q = ΔU + W we
mv2 − =− (no kinetic energy when the mass stops),
2 R r have Q < 0.
1 1 2GMm GMm GMm GMm 3GM 4R c AB, because the area under the curve is greatest.
i.e. × × − =− ⇒− =− ⇒r=
2 4 R R r r 4R 3
10 Applying Q = ΔU + W to the entire cycle we see that ΔU = 0.
Topic 10: Thermal physics The total work done is the area of the loop and the total thermal
PV 20 × 105 × 4.0 × 10−3 energy transferred is Q1 − Q2. Hence Q1 − Q2 = W and so Q1 is
1 PV = nRT so n = = = 3.2.
RT 8.31 × 300 larger.
PV PV
2 From 1 1 = 2 2 we see that n and V stay the same and
n1T1 n2T2 11 a The temperature at B is higher than that at A (since the
P P pressure is constant and the volume increased). Hence ΔU > 0.
so 1 = 2.
T1 T2 Work has been done by the gas and so W > 0. Hence
1 Q = ΔU + W > 0 and thermal energy has been supplied to the
Remember to always use degrees kelvin. gas. Along CD, similarly, the temperature at D is lower that
that at C (since the volume is constant and the pressure is less
P1 P 400 at D) and so ΔU > 0. No work has been done (the volume is
= 2 ⇒ P2 = × 3.0 × 105 = 4.0 × 105 Pa. constant) and so Q = ΔU + W = ΔU + 0 < 0.
3001 400 300
b Along BC: 0 = ΔU1 + W1 ⇒ ΔU1 = −⏐W1⏐.
3 The answer has to be B. Explicitly, the pressure is Along DA: 0 = ΔU2 + W2 ⇒ ΔU2 = +⏐W2⏐. Since we do not have
(2n)RT nRT enough information to determine the relation between⏐W1⏐
= = P where n and V are the number of moles and
(2V) V
and⏐W2⏐ we cannot answer the question.
volume in one half of the container.
4 The work done is the area under the graph (a trapezium) 12 The ice is first turned into liquid water at 0 °C. The liquid is more
and so (watch the axes) is disordered than the solid ice and so the entropy of the ice has
9.0 + 12
W= × 106 × (8.0 − 2.0) × 10−3 = 6.3 × 104 J. increased. The water at 0 °C is now warmed to 20 °C leading to
2 more disorder and hence a further entropy increase in the water.
PV PV V V
5 a From 1 1 = 2 2 we see that 1 = 2 and so For both the melting process and the warming process, thermal
n1T1 n2T2 T1 T2 energy was provided from the warm room whose entropy
V2 5.0 × 10−3
T2 = T1 = × 300 = 750 K. The pressure is therefore decreased. The overall entropy change has been an
V1 2.0 × 10−3 increase as demanded by the second law of thermodynamics.
constant so we may calculate the work done from
W = PΔV = 4.0 × 105 × 3.0 × 10−3 = 1.2 × 103 J.
b From Q = ΔU + W we see that since the temperature increased, Topic 11: Wave phenomena
ΔU > 0, and the gas expanded so W > 0 hence Q > 0. Thermal
1 The wavelength of the first harmonic is λ1 = 2L and that of the
energy has been supplied to the gas. f
second is λ2 = L . Hence 2 = 2.
f1
6 a The internal energy of an ideal gas is the total random kinetic
energy EK of the molecules of the gas. 2 The wavelength in tube X is λX = 2L and that in tube Y is λY = 4L.
b The absolute temperature is proportional to the average v
E fX λX λ 4L
kinetic energy of the molecules, T ∝ K . Therefore the internal Hence = = Y= = 2.
N fY v λX 2L
energy is proportional to the absolute temperature (and the λY
number of molecules), U = EK ∝ NT.
1 3 In the first case we have the first harmonic and so λ = 4L1.
4L
You must stress that the kinetic energy referred to is In the second case λ = 2 i.e. 3λ = 4L2.
3
random kinetic energy.
Subtracting, 2λ = 4(L2 − L1) = 4x = 1.20 ⇒ λ = 0.60 m.
Thus v = λ f = 0.60 × 560 = 336 ≈ 340 m s−1.
7 The piston moving rapidly in collides with molecules and the
molecules rebound with a speed greater than before. The average 1
kinetic energy of the molecules and hence the temperature It would have been easier to realise, through a diagram, that
increase. the distance x of the problem has to be half a wavelength.

8 At constant volume we have Q = ΔU since no work is being done.


At constant pressure, Q = ΔU′ + W, with W > 0. Hence the change
in internal energy is larger in the constant volume case
(ΔU > ΔU′) and there we have the larger temperature increase.
1
To decide what happens to temperature you must look at
internal energy.

Answers to Test yourself questions


202

4 The car is approaching the emitter so the frequency it receives is Topic 12: Electromagnetic induction
340 + u
f1 = 300 × Hz, where u is the unknown car speed. 1 The flux is decreasing and so there is an induced current. As
340
The car now acts as an emitter of a wave of this frequency (f1), explained earlier in the topic, the current is counterclockwise.
and the original emitter will act as the new receiver. Thus the Then there is a magnetic force on the rod directed to the left and
frequency received (315 Hz) is (car is approaching) so the velocity decreases. The loss in kinetic energy of the rod gets
340 + u 340 transformed into the electrical energy that lights up the lamp.
315 = (300 × )× from which we find u = 8.29 m s−1.
340 340 − u
1 2 The device is probably a coil. When the switch is closed, the
You must feel comfortable with this type of double Doppler current in the coil induces an emf. By Lenz’s law this emf has the
problems. opposite sign to the battery’s emf and so the current takes time to
rise to its final constant value. Since the constant final current is
12
5 The highest frequency measured will be when the source 1.0 A the resistance of D must be R = = 12 Ω.
340 1.0
approaches the observer and so 510 = fS and the lowest
340 − vS 3 a
340 ⌽ / Wb
when it moves away so that 504 = fS . 1.0
340 + vS
fS 340
510 340 − vS 340 + vS
Hence = 1.0119 = = . 0.5
504 340 340 − vS
fS
340 + vS
Solving for the speed of the carousel we get 0 t / ms
0.0119 × 340 10 20 30 40
0.0119 × 340 = 2.0119vS ⇒ vS = = 2.0 m s−1.
2.0119
6 The received wavelength is longer than that emitted and so the –0.5
galaxy moves away. The emitted frequency is
c 3.00 × 108
f= = = 4.56 × 1014 Hz; the received frequency is
λ 658 × 10−9 –1.0
3.00 × 108 Vrms = 16 = 11.3 ≈ 11 V
f= = 4.17 × 1014 Hz giving a shift Δf = 3.9 × 1013 Hz. b i
720 × 10−9 2
cΔf 200 16
Hence using v = the speed is ii = ⇒ Ns = 72.
f 900 Ns
3.00 × 108 × 0.39 × 1014 V 11.3
v= = 2.6 × 107 m s−1. c i The resistance is R = rms = ≈ 4.7 Ω
4.56 × 1014 Irms 2.4
λ
7 Use θD ≈ . From the graph θD ≈ 0.011 rad and so ii The average power is P = VrmsIrms = 16 × 2.4 ≈ 27 W.
b
2
λ 4.8 × 10−7 iii The peak power is 2 × P = 54 W.
b≈ = = 4.4 × 10−5 m.
θD 0.011
d
P/W
8 The angular separation of two points at the ends of the diameter
7 × 106
of Mars is θA = = 1 × 10−4 rad. The angle of the first 50
7 × 1010
650 × 10−9
diffraction minimum at the eye is θD = 1.22 = 3 × 10−4 rad.
3 × 10−3 40
The angular separation is less than this (θA < θD ) and so the points
are not resolved. Mars appears as a point source.
30
9 The intensity is reduced by a factor of 2 after going through
the first polariser. There is a further reduction by cos2 45° after 20
transmission through the second polariser and then another
cos2 45° reduction after transmission through the third. Overall 10
1 1 1 1 1
the intensity is reduced by × cos2 45° × cos2 45° = × × = .
2 2 2 2 8
0 t / ms
10 From Snell’s law, 1.33 × sin θ = 1.00 × sin(90° − θ) = 1.00 × cos θ. 0 10 20 30 40
1.00
Hence, tan θ = and so θ = 36.9°.
1.33

Physics for the IB Diploma


203

Topic 13: Quantum physics and nuclear 6 The uncertainty in the position of the electron is of order
physics Δx ≈ 10−10 m and so the uncertainty in the momentum is
h 6.6 × 10−34
Δp ≈ = ≈ 5 × 10−25 N s.
1 a At the threshold frequency, EK = 0 and so 4πΔx 4π × 10−10
1.8 × 1.6 × 10−19
hf = φ ⇒ f = = 4.4 × 1014 Hz.
6.6 × 10−34
b The kinetic energy of the emitted electrons is
3.0 × 108 p/Ns
EK = hf − φ = 6.6 × 10−34 × − 1.8 × 1.6 × 10−19 = 1.2 × 10−19 J. –5 × 10–25 0 5 × 10–25
4.8 × 10−7
1
1
It is important that you understand the logic of the diagram.
Notice finding frequency from wavelength and conversion
of eV to J.
Now the momentum will be measured to be p0 ± Δp.
1 2 × 1.2 × 10−19 The least magnitude of p0 is 0 and so the least possible
Hence, from EK = mv2 we find v = = 1.7 × 107 m s−1.
2 9.1 × 10−31 magnitude of the momentum of the electron is 5 × 10−25 N s.
h φ The energy of the electron is then at least:
2 From EK = hf − φ, and EK = qV we find qV = hf − φ ⇒ V = − . (5 × 10−25)2 3 × 10−20
q q EK ≈ ≈ 3 × 10−20 J ≈ ≈ 2 eV.
φ φ 2 × 9 × 10−31 1.6 × 10−19
Hence the vertical intercept is − and so − = −4.0 V giving
q q
φ = 4.0 eV = 4.0 × 1.6 × 10−19 = 6.4 × 10−19 J. The slope of the 7 a The measurement must be completed in less than 0.1 N s i.e.
h 6.6 × 10−34
h
graph equals and is measured to be 4.25 × 10−15. Δt ≈ 10−10 s. Then ΔE ≈ = ≈ 5 × 10−25 J.
q 4πΔt 4π × 10−10
b The energy difference between levels is not precisely known
Hence h = 4.25 × 10−15 × 1.6 × 10−19 = 6.8 × 10−34 J s.
because of the uncertainty in a. Hence there will be a range
1 of wavelengths for a given transition rather than a strictly
h monochromatic photon.
Notice that if we plot V on the vertical axis the gradient is .
q
8 After acceleration the kinetic energy of the proton is eV and this is
p2 all converted to electrical potential energy when it just stops
3 The kinetic energy of the accelerated electron is EK =
2m ke(42e)
and equals the work done in moving through the on the nuclear surface. Hence eV = where R is the radius
R
potential difference i.e. qV. Hence p = 2mqV and so of the nucleus. The radius is R ≈ 1.2 × 10−15 × 961/3 = 5.5 × 10−15 m.
λ= h = 6.6 × 10−34 = 7.7 × 10−11 m. ke(42e) 8.99 × 109 × 42 × 1.6 × 10−19
Hence, V = = ≈ 11 MV.
2mqV 2 × 9.1 × 10−31 × 1.6 × 10−19 × 250 eR 5.5 × 10−15
1
1
It is crucial that you realise the conversion KE to electric
Notice that λ ∝ 1 : this is convenient for Paper 1 questions. energy.
V

4 To resolve something the wavelength used must of the same m A


9 From the hint we see that the number in front of is the ratio
order of magnitude as the size of the object to be resolved. q n
where A and n are integers – the charge of the atoms may be ne.
The de Broglie wavelength of the electrons used in an electron
Mass numbers 35 and 37 are both possible for either n = 1 or
microscope is much smaller than visible light and so can resolve
n = 2 and so the answer is D.
very small objects.
1 10 a The experimental evidence is the fact that energies of alpha
It is important to stress the connection between wavelength
and gamma particles in radioactive decay are discrete.
and ability to resolve.
b The alpha particle ends in an excited state of uranium. When
the uranium returns to its ground state photons will be emitted.
5 a A wavefunction is a mathematical function which, when
Eatom mL2 L mn
squared and multiplied by small volume element, gives the 11 = 10−6 = n n2 so that a = 106 ≈ 106 × 2000 ≈ 104.
probability of finding a particle within that volume element. Enucleus meLa Ln me
1.0 × 10−10
b i The wavelength is λ = = 0.5 × 10−10 m. The 12 The initial activity is given by A0 = λN0. The number of moles of
2 50
h 6.63 × 10−34 strontium is = 0.56 and so the number of strontium nuclei in
momentum is therefore p = = = 1.3 × 10−23 N s. 90
λ 0.5 × 10−10 the sample is N0 = 0.56 × 6.02 × 1023 = 3.3 × 1023. Hence
ln 2
N
p2 T1/2 0
ii The kinetic energy is EK = and so equal to ln 2 × 3.3 × 1023
2m = 2.5 × 10 and so T1/2 =
14
= 9.14 × 10 s ≈ 29 yr.
8
(1.3 × 10−23)2 2.5 × 1014
= 9.3 × 10 J.
−17
2 × 9.1 × 10−31 1
c Any point where the wavefunction is zero. It is important that you remember that the formula for the
initial activity and that you can find the initial number of
nuclei present.

Answers to Test yourself questions


204

ln 2
13 The decay constant is λ = = 0.283 min−1. c The area of one pixel is 4.5 × 10−10 m2 and so the length of a
2.45
pixel is 4.5 × 10−10 = 2.1 × 10−5 m. The images of the two
Thus A = A0e−λt = A0e−0.283 × 1.0 = A00.753, i.e. about 75% of the
points are a distance 1.4 × 0.025 mm = 3.5 × 10−5 m apart. This
original activity.
is not larger than two pixel lengths and so the points are not
1 resolved.
You will not gain any marks if you do not use the radioactive
decay formula. Option A: Sight and wave phenomena
14 NX = N0e−λt NY = N0 − N0e−λt 1 Since the intensity of light is low, vision takes place mainly
NX N0e −λt
e−λt 1 through the rods. The highest concentration of the rods is away
= = = from the principal axis so by looking a bit sideways at the object,
NY N0 − N0e−λt 1 − e−λt 4
1 light falls on the rods.
Hence 4e−λt = 1 − e−λt ⇒ 5e−λt = 1 ⇒ e−λt = ⇒ λt = ln 5
5
ln 5 ln 5
t= = × 2.0 = 4.6 min. 2 In low-intensity light vision is through rods. Rods are more
λ ln 2
sensitive for blue than red and so the blue paper will be more
1 clearly seen.
You will not gain any marks if you do not use the radioactive
decay formula. 3 In bright sunlight cones are being used and they are sensitive to
colour so red appears clearly. In low-intensity light, the cones are
15 For X we go to half the initial activity and find a time of 0.35 min. used and these are not sensitive to colour.
For Y we must wait until most of X has decayed away so that
no new Y nuclei are produced. Looking at how long it takes for 4 Yellow is a secondary colour obtained when red mixes with green.
the activity to halve (after 2.5 min) we find a Y half-life of about Adding blue leads to white colour.
0.65 min.
5 A yellow filter subtracts its complementary colour, i.e. blue.
The transmitted light has a colour given by
Topic 14: Digital technology W − B = (B + G + R) − B = G + R = Y, i.e. yellow, as expected of a
1 We put the appropriate power of 2 under each digit starting with yellow filter.
0 on the right: 10101.
4 3 2 1 0 6 The filters subtract in turn blue and then green. Thus the
10101 → 1 × 24 + 0 × 23 + 1 × 22 + 0 × 21 + 1 × 20 → 16 + 0 + 4 + 0 + 1 = 21 transmitted colour is W − B − G = (B + G + R) − B − G = R, i.e. red.

2 With 5 bits we can have at most 25 = 32 numbers. These are the Option E: Astrophysics
numbers from 0 to 31.
1 The Sun will become invisible when its apparent magnitude
3 The number of bits imprinted on the CD is becomes about 6. This is a difference of 6 − (−27) = 33 magnitudes.
44100 × 32 × 74 × 60 = 6.27 × 109 bits Thus the apparent brightness of the Sun will decrease by a factor
Since 1 byte = 8 bits this corresponds to of (2.512)33 ≈ 1.6 × 1013. The distance must then increase by a
6.27 × 109 factor of 1.6 × 10−13 = 4 × 106, i.e. to a distance of
= 780 × 106 bytes = 780 Mbytes.
8 6 × 1017
4 × 106 × 1.5 × 1011 = 6 × 1017 m = = 63 ly.
9.46 × 1015
4 The charge in 30 ms is 2.0 × 108 × 30 × 10−3 × 1.6 × 10−19 = 9.6 × 10−13 C
Q 9.6 × 10−13 2 The ratio (2.512)MB − MA ≈ (2.512)15.99 ≈ 2.5 × 106 gives the ratio of the
and so V = = = 38 mV.
C 25 × 10−12 apparent brightness of the two stars when both are viewed from
10 pc away. Since the distance is the same, this ratio is also the
5 a The collecting area of the CCD is
L1
30 × 30 = 9.0 × 102 mm2 = 9.0 × 102 × 10−6 m2 = 9.0 × 10−4 m2.
b1 4πd2 L1
9.0 × 10−4 ratio of luminosities: = = .
The area of one pixel is then = 4.5 × 10−10 m2. b2 L2 L2
2.0 × 106
4πd2
The power incident on a pixel is
P = 6.8 × 10−4 × 4.5 × 10−10 = 3.1 × 10−13 W. The energy deposited 3 The star appears dimmer when seen from 10 pc (since 4.8 is less
in 25 ms is then E = 3.1 × 10−13 × 25 × 10−3 = 7.8 × 10−15 J. bright than 3.2). Thus its distance is less than 10 pc.
The energy of one photon is 0.03 − 0.58
hc 6.63 × 10−34 × 3.0 × 108 4 Vega is a distance d = 10 × 10 5 = 7.8 pc from the Earth.
E= = = 4.0 × 10−19 J and so the number
λ 5.0 × 10−7
2.9 × 10−3
7.8 × 10 −15
5 The wavelength is found from λ0 = = 9.7 × 10−7 m and
of photons per pixel is = 195 × 102 ≈ 2 × 104. 3000
4.0 × 10−19 so will appear reddish. (The peak wavelength is in the infrared
b The number of electrons is therefore 0.80 × 2 × 104 = 1.6 × 104. but the left side of the black body curve is mainly over red
The charge of this number of electrons is wavelengths.)
1.6 × 104 × 2.6 × 10−19 = 2.6 × 10−15 C. The potential difference is
Q 2.6 × 10−15
V= = = 0.12 mV.
C 22 × 10−12

Physics for the IB Diploma


205

6 a Achernar and EG129 have the same temperature but b The period of the information signal (we look at the envelope
Achernar has a much higher luminosity so it must have from peak to peak) is 0.305 − 0.055 = 0.25 ms.
a very large area: approximately, 1
The frequency is then = 4.0 kHz.
LA 103 σAAT4 AA A R 0.25
≈ = = ⇒ A ≈ 107 ⇒ A ≈ 3 × 103.
LE 10−4 σAET4 AE AE RE c The bandwidth is twice the information signal frequency and
b Achernar and Ceti have the same luminosity but Ceti so is 8.0 kHz.
is much cooler. This means that Ceti has a much larger d The maximum value of the modulated signal is 2.0 mV and the
area than Achernar: approximately, minimum value is 1.0 mV. Hence the information signal
σACTC4 AC(3 × 103)4 2.0 − 1.0
LC
≈1= =
A R
⇒ C ≈ 2 × 103 ⇒ C ≈ 40. amplitude is = 0.50 mV.
LA σAATC4 AA(2 × 104)4 AA RA 2

This means that stars near Ceti (i.e. red giants) are huge 2 a The amplitude of the FM modulated signal is 12 V, the same as
followed by stars around Achernar (blue giants). Stars in the the carrier.
white dwarf region of EG129 are very small (typically the size b The lowest frequency is fC − kAS = 600 − 20 × 2.0 = 560 kHz and
of the Earth). the highest is fC + kAS = 600 + 20 × 2.0 = 640 kHz.
40
c β= = 5.0
7 A main sequence star with a temperature of 10 000 K has a 8.0
75
luminosity that is about 80 times that of the Sun (from the HR 3 Applying the formula gives β = = 5 and
15
diagram). Hence d = L = 80 × 3.9 × 10 = 2.4 × 1018 m.
26
bandwidth = 2(75 + 15) = 180 kHz. (This is larger by 150 kHz
4πb 4π × 4.4 × 10−10
compared to an AM transmission containing the same audio
8 The first is the existence of background radiation. This is radiation information.)
that existed when the universe was very young. As the universe
expanded, the original high temperature fell and so the peak 4 We put the appropriate power of 2 under each digit starting with
wavelength of this radiation shifted to its present low value of 0 on the right: 10101.
4 3 2 1 0
about 3 K.
10101 → 1 × 24 + 0 × 23 + 1 × 22 + 0 × 21 + 1 × 20 → 16 + 0 + 4+ 0 + 1 = 21
The second piece of evidence is the expansion of the universe
and
according to Hubble’s law. If the distance between galaxies is
25 = 1 × 24 + 1 × 23 + 0 × 22 + 0 × 21 + 1 × 20
getting larger then in the past the distance must have been smaller,
252 = 11001
indicating a violent start of the universe from a small region.
5 With 5 bits we can have at most 25 = 32 numbers. These are the
9 According to the standard Big Bang model, comparing the actual
numbers from 0 to 31.
density of the universe to the critical density allows a prediction
of whether the universe will continue its expansion forever
6 a The samples are taken every 0.50 ms and so the sampling
(open universe ρ < ρc ), halt the expansion and re-collapse (closed 1
universe ρ > ρc ) or continue the expansion forever at a rate that frequency is = 2.0 kHz.
0.50 ms
will stop at infinity (flat universe ρ = ρc ). b The smallest difference between any two samples is 0.1 V. The
2.0 − 0
samples range from 0 V to 2.0 V and so we need = 20
10 If it were, its luminosity should have been between 503 = 125 000 0.1
and 504 = 6 250 000 times larger than the luminosity of the Sun. So quantisation levels. With 4 bits we can have 2 = 16 and this is
4

this star is not a main sequence star. not enough. With 5 we can have 25 = 32 which is plenty. So we
need 5 bits per sample.
Δλ v c The bit rate is 2000 × 5 = 10 000 bit s−1 = 10 kbit s−1
11 From = the speed of the galaxy is
λ0 c d From the first graph we see that the signal shows variation
689.1 − 656.3 v
= ⇒ v = 1.5 × 104 km s−1. within 0.07 ms. So a better sampling frequency would be
656.3 c 1
From v = Hd, 1.5 × 104 = 72d ⇒ d = 210 Mpc. ≈ 14 kHz. Similarly, the signal varies by as little as
0.07 ms 2.0 − 0
0.05 mV so we need = 40 quantization levels. So we
1 1 Mpc 0.05
12 a T= = = s need six bits per sample (26 > 40).
H 72 km s−1 Mpc−1 72 × 103 m
106 x 3.09 × 1016 m Answers using other similar values are also acceptable.
= s = 4.29 × 1017 s
72 × 103 m
4.29 × 1017 7 The bit rate is 8000 × 8 = 64 000 bit s−1 = 64 kbit s−1. The duration of
= = 13.6 billion years. 1
365 × 24 × 60 × 60 one bit is then = 1.6 × 10−5 s = 16 μs. The total number of
64 000
b This estimate is based on a constant rate of expansion based bits generated is 64 × 12 × 60 ≈ 46 Mbit or 5.7 Mbyte.
on its present value. In the past the universe expanded faster
and so the universe is younger than the estimate in a. 8 The bandwidth is 3.0 × 103 − 50 = 2950 Hz and this is also the bit
rate, 2.95 ≈ 3.0 kbit s−1.
Option F: Communications
9 From Snell’s law, 1.33 × sin θC = 1.00 × sin 90°,
1 a There are four full waves in a time interval of 0.1 ms. Hence
1.00 1.00
1 sin θC = , θ = arcsin = 48.8°.
the carrier period is = 0.25 ms. The frequency is therefore 1.33 C 1.33
0.10 4
= 40 kHz.
0.25
Answers to Test yourself questions
206

Pfinal P P 1 Option G: Electromagnetic waves


10 −16 = 10 log ⇒ −1.6 = log final ⇒ final =10−1.6 ≈ .
Pinitial 8.0 8.0 40
1 1 1 1 1 1 24.0
1 8.0 1 = − = − = ⇒ v = 24.0 cm. M = − = −3.0.
So Pfinal ≈ P ⇒ Pfinal = mW = 0.20 mW. v f u 6.0 8.0 24.0 8.0
40 initial 40 The image is real, upside down and of height 9.0 cm.
P
11 The loss is 3.0 × 12 = 36 dB. Then –36 = 10 log out ,
Pin 2
Pout
= 10−3.6, Pout ≈ 180 × 2.51 × 10−4 = 0.045 mW.
Pin
P P G G 6.8
12 G = 10 log out , out = 10 10 , Pout = Pin10 10 = 0.25 × 10 10 = 1.2 mW.
Pin Pin
13 The total power loss without any amplifiers would have been
−4.0 × 400 = −1600 dB. The net gain of the amplifiers must then
1600
be +1600 dB and so we need = 80 amplifiers.
20
14 a The attenuation after a distance of 3.0 km is 3.0 × 14 = 42 dB.
The power is then found from
−42 = 10 log ⎛⎝ P ⎞⎠, log⎛⎝ P ⎞⎠ = −4.2,
200 200
P = 10−4.2 ≈ 6.3 × 10−5, P = 0.013 mW.
200
3
b Attenuation in coaxial cables is very frequency dependent.
There is much more attenuation at higher frequencies.

15 a The power is distributed uniformly over a sphere of radius d.


P
The power per unit sphere area is therefore
4πd2
and so the power collected by the antenna is
P 28 × 106
×A = × 1.2 = 0.27 mW.
4πd2 4π(105)2
0.27 × 10−3
b The power loss in dB is 10 log = −110 dB. This
28 × 106
110
corresponds to a specific attenuation of = 1.1 dB km−1.
100
R 80
16 a The gain is G = − F = − = −5.
R 16
b V0 = GVin = −5 × (−0.60) = +3.0 V. 4 Since half the amount of light now goes through the lens the
c 9.0 = −5 × Vin ⇒ Vin = −1.8 V. Since Vin = −2.0 V < −1.80 V the image formed will be half as bright.
output will saturate at +9.0 V.
d The potential difference at the ends of resistor R is 5 Draw the dotted line (line 1) from the top of the image through
1.2 − 0 = 1.2 V. Hence the current through this resistor is the centre of the second lens. Extend this line backwards until it
1.2 intersects the screen. This locates the image. Now draw line 2,
= 75 μA. This is also the current in RF since the
16 × 103 parallel to the principal axis from the top of the image. Join the
op–amp takes no current. point where it intersects the eyepiece (3) with the top of the final
e The output will saturate when the input exceeds 1.8 V. The image. Extend this forward until it intersects the principal axis.
input is 1.8 V at times (approximately) 0.1 s and 0.4 s. Hence we This the focal point.
have this graph.
V/V
0 0.1 0.2 0.3 0.4 0.5
0 t / ms

–2

–4 F
1 3
–6
2

–8

RF 100 2
17 a The gain is G = +1 = + 1 = 5. a objective magnifies = =2
R 25 1
b V0 = GVin = 5 × (−0.50) = −4.5 V. 6.6
b eyepiece magnifies = = 3.3
2
c 6.0 = 5 × Vin ⇒ Vin = 1.2 V. Since Vin = 3.0 V > 1.20 V the output c overall =
6.6
= 6.6
will saturate at +6.0 V. 1

Physics for the IB Diploma


207

6 We must draw a construction line from the top of the image in 13 The wavelength in the soap film that undergoes destructive
the objective through the centre of the eyepiece. The rest of the interference is λ = 2d ⇒ λ = 2 × 0.26 × 10−6 = 5.2 × 10−7 m. This
rays upon refraction in the eyepiece must emerge parallel to the corresponds to a wavelength in air of λair = λn = 5.2 × 10−7 × 1.33
construction line. = 6.9 × 10−7 m which corresponds to red. The reflected light is
fo fe missing red and so appears cyan.

Δd 260 × 10−9
14 tan θ = = = 1.7 × 10−3.
Δx 1.5 × 10−4
θ2
h So D = L tan θ = 5.0 × 10−2 × 1.7 × 10−3 = 8.5 × 10−5 m.
θ1 θ1

objective eyepiece Option H: Relativity


image at infinity
1 Light will cover the distance Δx = 6 × 108 − 3 × 108 = 3 × 108 m in
7 The diagram shows what is meant by the angular width of the Δx 3 × 108
a time of = = 1 s. The event ‘lightning strikes’ thus
central maximum. It is the angle subtended at the midpoint of the c 3 × 108
slits by the distance between the centres of the first minima on occurred at t = 3 − 1 = 2 s, at position x = 3 × 108 m. All observers
either side of the central maximum, i.e. 2θ. in frame S agree that these are the coordinates of the event
‘lightning strikes’.
1
The time of an event is not the time that you see it unless
you are at the position of the event.
θ
2 a One half-life has gone by, i.e. 12 minutes.
b The interval of 12 minutes in a is the proper time interval
between the two events for the rocket observer. So the interval
5
is time interval = γ × proper time interval = × 12 = 20 min for
3
1 the lab observer.
Since d sin θ = (0 + )λ, we find
2 c For the lab observer the half-life is 20 min and so he will also
λ 656 × 10−9
sin θ = = = 2.624 × 10−3. N
measure 0 nuclei of the radioactive material in the container.
2d 2 × 0.125 × 10−3 2
This is small and so θ ≈ sin θ = 2.624 × 10−3 rad. So the angular
1 5
width is 2θ = 5.25 × 10−3 rad. 3 The gamma factor for a speed of 0.80 c is γ = = .
1 − 0.802 3
40 ly 40 y
a The time is simply = = 50 y.
8 The energy gets redistributed in the interference pattern. The 0.80 c 0.80
energy that would appear at the minimum appears at the 1
maximum. 1 ly
Remember that = 1 y.
c
9 At the minima there will not be complete cancellation any
b We provide two solutions: according to the spacecraft, the
more and so the fringes there will not be completely dark. At
distance separating it and the planet is length contracted to
the maxima the amplitude will be less than before and so these
40 ly 40 y
fringes will not be as bright. = = 24 ly. Hence the time for the planet to arrive
γ 5/3
24 ly 24 y
10 The separation of two consecutive slits is at the spacecraft is = = 30 y. OR: the time interval
0.80 c 0.80
1
d= mm = 1.67 × 10−6 m. between leaving Earth and arriving at the planet is a
600 proper time interval for the spacecraft observers.
a In the first-order maximum, n = 1 and so
589 × 10−9 Δt 50
d sin θ1 = λ1 ⇒ sin θ1 ≈ θ1 = = 3.534 × 10−4 rad Therefore, proper Δt' = = = 30 y.
1.67 × 10−6 γ 5/3
589.6 × 10−9 40 ly
and d sin θ2 = λ2 ⇒ sin θ2 ≈ θ2 = = 3.538 × 10−4 rad. c For Earth the time is = 40 y.
1.67 × 10−6 c
d Let T be the time for the signal to arrive at Earth according
The difference is Δθ = (3.538 − 3.534) × 10−4 = 4 × 10−7 rad. to spacecraft clocks. According to the spacecraft the Earth
b In the second-order maximum, n = 2 and so, similarly, is moving away at 0.80c. The signal (moving at speed c) has
Δθ = 8 × 10−7 rad. to cover the distance originally separating the Earth and the
hc 6.63 × 10−34 × 3.0 × 108 spacecraft (24 ly according to spacecraft observers) plus the
11 λ= = = 5.0 × 10−11 m.
eV 1.6 × 10−19 × 25 × 103 additional distance that the Earth will move away in time T
λ 3.80 × 1011 24
12 2d sin θ = 1 × λ ⇒ d = = = 4.45 × 10−11 m. (i.e. 0.80cT). Therefore, cT = 24 + 0.80 cT ⇒ T = = 120 y.
2 sin θ 2 sin 25.3° 0.20

Answers to Test yourself questions


208

4 Light from the lightning strikes arrives at G at the same time 13 Before acceleration, E0 = mc2 . After acceleration, E = γmc2.
(according to G). Observer R measures that light arrives at G at Hence the change is ΔE = γmc2 − mc2 = (γ − 1)mc2 and this equals
the same time as well since the arrivals occur at the same point in 3200
qV = 3.2 × 109 eV = 3200 MeV. So, (γ − 1) = ⇒ γ = 4.41.
space. But according to R, G is moving away from the light from 938
the right building. The light from both buildings travels at the 1 v 1
Hence 4.41 = ⇒ = 1− = 0.97.
same speed c according to R. For light to arrive at the same time, v2 c 4.412
1− 2
the signal from the right building must have been emitted first c
according to the R. And p = γmv = 4.41 × 938 × 0.97 = 4.0 × 103 MeV c−1 . This is also
1 expressed as p = 4.0 GeV c−1.
Notice the logic of the argument and the detail required in
the answer. 14 The best way to proceed is to find the total energy of the proton
through E2 = (mc2) + p2c2, i.e. E = 0.9382 + 2.402 = 2.58 GeV.
2.58
5 Take the ground as frame S and A as frame S’. Then use E = γmc2 to find γ = = 2.75 and finally
0.938
Then v = 0.80 c, u = −0.40 c and we need to find u’:
1 v 1
2.75 = ⇒ = 1− = 0.93.
u−v −0.40 c − 0.80 c −1.20 c v2 c 2.752
u′ = = = = −0.91 c. 1− 2
1 − uv2 (−0.40 c)(0.80 c) 1 + 0.32 c
1−
c c 2
1
The speed of B relative to A is 0.91c directed to the left.
Notice the change of the proton rest energy from 938 MeV
to 0.938 GeV. This method is preferable to solving for v from
6 The total energy is E = 9382 + 28002 = 2953 MeV. Hence the
p = γmv.
2953
gamma factor is γ = = 3.148.
938
v2 1 v 1 15 The Ψ is at rest so its momentum is zero. Therefore the muon and
So 1 = 3.148, 1 − 2 = ⇒ = 1− = 0.948.
2 c 3.1482 c 3.1482 antimuon have equal and opposite momenta. Let the magnitude
v
1− 2 of the momentum of the muon be p. Conservation of energy
c
states that
7 The gamma factor is 1 = 5.025 and so the total energy 3100 = 2 1062 + p2c2
1 − 0.982
after acceleration is E = γmc2 = 5.025 × 0.511 = 2.568 MeV. The 31002 = 4(1062 + p2c2)
p2c2 = ⎛⎝ 3100 − 1062 ⎞⎠
2
kinetic energy therefore is EK = (2.568 − 0.511) = 2.057 MeV and
4
thus the voltage is V = 2.057 ≈ 2.06 MV.
p = 1.55 × 103 MeV c−1 = 1.55 GeV c−1
8 The gamma factor is 1 = 3.203. The total energy is thus
1 − 0.952 16 By the equivalence principle, the situation is equivalent to a rocket
E = γmc = 3.203 × 938 = 3004 MeV and so the kinetic energy is
2 at rest on the surface of a massive body. In this case we know that
EK = (3004 − 938) = 2066 MeV. the ray of light will bend towards the massive body and so the
ray will follow a curved, downward path. It will therefore hit the
9 Use E2 = (mc2)2 + p2c2 to get opposite side of the rocket at a height less than h.
5402 = 1062 + p2c2 ⇒ p = 529 ≈ 530 MeV c−1.
1
6500 You must refer to the equivalence principle.
10 Since E = γmc2 the gamma factor is γ = = 3.61. Hence
1800
1 v2 1 v2 v 17 Working backwards from the previous example, the situation
= 3.61, so 1 − 2 = 2
⇒ 2 = 0.923 ⇒ = 0.961.
v 2 c 3.61 c c is equivalent to a rocket accelerating in outer space with
1− 2 acceleration 9.8 m s−2. The time for light to cross the distance of
c
s 300
300 m is t = = = 10−6 s. In this time the light has moved
pφ γ (2m)v γ c 3 × 108
11 From p = γmv we find = φ = φ < 1, i.e. the η meson
pη γηm(2v) γη 1 1
down a distance x = at2 = × 9.8 × (10−6)2 ≈ 5 × 10−12 m(!).
has the greater momentum. 2 2

12 a Combining E = γmc2 and p = γmv we find 18 The situation is equivalent to a rocket at rest on the surface
γmc2v Ev pc2 of a massive object. Hence the ray of light is climbing up a
p= 2 = 2 ⇒v= . For a massless particle,
c c E gravitational field and so the frequency will get smaller by the
pc 2 gravitational redshift effect.
E = pc and so v = = c.
pc
(640 MeV c−1)c2
b v= = 0.979 c.
654 MeV
c mc2 = E2 − p2c2 = 6542 − 6402 = 135 MeV, m = 135 MeV c−2.

Physics for the IB Diploma


209

19 Newton would claim the path of the planet is due to the 7 The transducer acts as both emitter and receiver. The emissions
gravitational force between the Sun and the planet. Einstein must stop so that the reflected ultrasound may be detected.
would claim the path is due to the curved spacetime: the planet
follows a geodesic, i.e. a path of least length, in the curved 8 The charge in 1 kg is 6.9 × 10−3 C corresponding to
spacetime around the massive Sun. 6.9 × 10−3
= 4.3125 × 1016 elementary charges. This requires an
1.6 × 10−19
1 energy of 4.3125 × 1016 × 40 × 1.6 × 10−19 = 276 × 10−3 J . The dose
This is an ‘explain’ question. There has to be some detail. equivalent is thus 1 × 276 × 10−3 Sv ≈ 280 mSv.
1 25
20 We have that 5 = and so r = R = 5.2 × 108 m.
R 24 S 9 a Gamma emitters are preferable because the gamma rays are
1− S not easily absorbed by the body and so can be detected.
r
b The energy absorbed is
25 R 380 × 106 × 140 × 103 × 1.6 × 10−19 = 8.51 × 10−6 J. The absorbed
Hence h = R − R = S = 22 × 107 m.
24 S S 24 8.51 × 10−6
dose is thus D = = 1.22 × 10−7 Gy and since the
70
1 quality factor for gamma rays is 1, the dose equivalent is
The question refers to height so we must remember to 1.22 × 10−7 Sv.
subtract the radius in the end.
10 The activity is A = A0e−λεt where the effective decay constant is
ln 2 ln 2
Option I: Medical physics λE = λP + λB = + .
2 4
Hence, after 6 days A = A0e ( 2 4 ) = A0e−3ln2 = 0 .
ln 2 + ln 2
− ×4 A
1 No, because the response of the ear is not linear. 8
In the first case the sensation of loudness would increase by
2 × 10−6 ⎞ 11 Let A be the initial activity in the 10 cm3 of albumen and
10 log ⎛⎝ = 3.0 dB and in the second by
1 × 10−6 ⎠ V the volume of blood in the patient.
× ⎞ = 1.7 dB. 5 5
10 log ⎛⎝
−6
3 10 Then, 120 = A , 125 = A . We may neglect the
2 × 10−6 ⎠ V + 10 5000 + 10
5 5
10 in the denominators so that 120 = A and 125 = A .
The original level was IL1 = 10 log ⎛⎝ −12 ⎞⎠ = 10 log 102 = 20 dB.
10−10 V 5000
2 5
10 A
The new sound intensity level is 125 5000 V
Hence = = and so V = 5200 cm3.
IL2 = 10 log ⎛⎝ −12 ⎞⎠ = 10 log 104 = 40 dB. The increase is thus 20 dB.
−8
10 120 5 5000
A
10 V

1 Option J: Particle physics


It would have been quicker to say
ΔIL = 10 log ⎛⎝ −10 ⎞⎠ = 10 log 102 = 20 dB.
10−8 1 No, because the kaon has non-zero strangeness quantum
10 number.

3 The intensity from one machine is found from 2 a p → e− + γ baryon number


95 dB = 10 log ⎛⎝ −12 ⎞⎠ ⇒ −12 = 1.0 × 109.5 ⇒ I = 0.0316 W m−2. p → π− + π+ electric charge, baryon number
I I b
10 10 c n → p + e− lepton number
The intensity at 102 dB is d e− + e+ → γ momentum
102 dB = 10 log ⎛⎝ −12 ⎞⎠ ⇒ −12 = 1.0 × 1010.2 ⇒ I = 0.158 W m−2. e+ → μ+ + νμ energy, lepton number
I I e
10 10 f p → n + e+ +νe energy (but can occur within a nucleus where
0.158
The number of machines is therefore ≈ 5. the required energy is provided by the binding energy of the
0.0316
nucleus)
4 I = I0e−μx = I0e−0.52×1.2 = 0.54I0.
3 a Strangeness is violated here since S = −1 on the left hand side
5 The photoelectric effect is more useful since we need to have a of the reaction equation but S = 0 on the right. Hence the
contrast between, for example, tissue and bone that have different decay must be a weak interaction process.
atomic numbers. b A possible diagram is shown.

6 a μ is the probability per unit length that a particular X-ray d
photon will be absorbed. Z0
d
b No significant change is expected. The low-energy photons s d
would be absorbed and would not contribute to making the
u u
image.
c The attenuation coefficient at 50 keV is 1.5 mm−1 and so u u
I = I0e−μx = I0e–1.5×2.2 = 0.037I0.

Answers to Test yourself questions


210

4 11 a

or

b Here, m = M = me and EA = 4mec2.


5 Hence 16(mec2)2 = 2mec2 E + (mec2)2 + (mec2)2 giving E = 7mec2.
Thus EK = E − mec2 = 6mec2 = 3.1 MeV.

1
Notice that the total rest energy in the final state is 4mec2
and 2mec2 in the initial. The kinetic energy supplied is much
more than the difference 4mec2 − 2mec2 = 2mec2 because the
6 e– particles produced must have kinetic energy.
W– v–e
boson
d u 12 EA = 1193 + 498 = 1691 MeV.
neutron d d proton Hence 16912 = 2 × 938E + (140)2 + (938)2 giving E = 1045 MeV.
u u

6.6 × 10−34 13 a The reaction violates both muon and electron lepton number
7 R≈ m = 10−18 m. conservation. Lμ = +1 on the left and 0 on the right and
80 × 109
4π × ( × 1.6 × 10 ) × 3 × 10
−19 8
Le = +1 on the right and 0 on the left.
(3 × 108)2
b The correct reaction is μ− → e− + νμ + νe.
(Notice the conversion of mass from GeV c−2 to kg.)
14 To conserve lepton number it has to be a muon neutrino.
8 red antiblue

15 The energy needed to break apart the nucleus of helium into its
green antiblue
constituents is 28 MeV. The average kinetic energy at a
3
green antired temperature T is EK = kT and so equating the two gives
2
3 2 × 28 × 106 × 1.6 × 10−19
9 a The red quark will have the same flavour as the original quark, kT = 28 MeV ⇒T = K ≈ 2 × 1011 K.
2 3 × 1.38 × 10−23
i.e. strange. A more accurate estimate than the one presented here
b The gluon colours will be green antired. gives a temperature closer to T ≈ 1010 K. This is the time of
qB 1.6 × 10−19 × 1.4 nucleosynthesis, the time when protons and neutrons combined
10 a f= and so f = = 21 MHz.
2πm 2π × 1.67 × 10−27 to form nuclei for the first time. The Universe then was only a few
q2B2R2 (1.6 × 10−19 × 1.4 × 0.25)2 minutes old.
b Kmax = =
2m 2 × 1.67 × 10−27
9.39 × 10−13
= 9.39 × 10−13 J = eV ≈ 5.9 MeV.
1.6 × 10−19

Physics for the IB Diploma


Index

A-scan (amplitude modulated) 141 beta particles 38, 39, 44, 77 converging lenses 113–16, 117
aberrations in lenses 118 in cancer treatment 144 coolants 43
absolute magnitude 87 Big Bang 94, 98, 155 cosmic microwave background radiation 94
absorbed dose 143 binary numbers 79, 101 cosmology 93–5, 155
absorption 49, 50 binary stars 89 Coulomb’s electrostatic law 32
absorption spectra 37, 89 binding energy (B.E.) 40, 41 critical angle 104
ac circuits 70 biological effect of radiation 38, 143 critical density 95
acceleration 9, 10, 12, 16 bit rate 103 critical mass 43
and general relativity 131–2 black bodies 48, 94 crystals 121, 141
of particles 129, 150–1 black holes 96, 135 current 27–31, 34
in simple harmonic motion 20 blueshift 62 induced 68, 69, 70
in uniform gravitational field 52 Bohr model 74 photoelectric cells produce 45
accommodation (sight) 84 Boltzmann equation 155 and power loss in transmission 71
accurate measurements 2 bosons 146, 149, 154 curved spacetime 134–5
activity 39, 78, 143 boundary conditions 74, 75 cyclotrons 150
adiabatic changes 58, 59 Bragg formula 121
age of the universe 98 Brewster’s law 66 damping 21
albedo 49 brightness, star 87, 88 dark energy and matter 95
alpha particles 36, 38 De Broglie’s hypothesis 73
in cancer treatment 144 calorimetry 18 deafness 138
energy of 39, 77 cancer, radiation therapy for 144 decay constant 78
AM (amplitude modulation) 99, 100, 101 capacitance 81 deep inelastic scattering experiments 154
amplification of sound 136 carrier waves 99, 100 degradation of energy 42
amplifiers 107–10 centripetal force 16, 56 demodulator 101
amplitude 21, 22, 23 Cepheid stars 88 depth of vision 84
in simple harmonic motion 20 chain reactions 43 detectors, particle 152
and superposition 60 Chandrasekhar limit 96 diagnostic uses 144
analogue meters 5 charge 27, 81 diffraction 25, 63–4
analogue signals 79, 101 and fields 32, 33, 54 of electrons 73
transmission of 102, 103 on fundamental particles 146 of X-rays 121
analogue storage devices 80 and resistance 28 diffraction gratings 119
angle of incidence 25 charged-coupled devices 81–2 digital meters, uncertainties in 5
angular frequency 20 chromatic aberration 118 digital signals 79, 101–4
angular magnification 116, 117 circuits 29–31 reshaping pulses of 109–10
antimatter 155 circular apertures 63 digital technology 79–82
antineutrinos 39, 77 circular motion 16 discrete energies 37, 74, 75
antiparticles 146, 148, 155 coaxial cables 106 of alpha and gamma particles 39, 77
apparent brightness 87, 88, 91 coherence 26, 112, 118 see also quanta
apparent magnitude 87, 88 colour 85, 112 dispersion 104, 105, 111
Archimedes’ principle 51 colour blindness 85 displacement 9, 10, 16
areas under curves/graphs 2, 10, 14 colour (quantum number) 145, 147, 154 in simple harmonic motion 20
and work done 15, 57 conservation of 149 and waves 22, 23, 24, 26
artificial transmutation 41 comets 87 distance 15
astronomical unit 87 communications 99–110 in astronomy 87, 88, 91
astrophysics 87–98 components of vectors 7 distance of closest approach 76
atomic mass, measuring 76 compound microscopes 117 Doppler effect 62, 89
atomic structure 36 compression 24, 58 dose equivalent 143
atoms 36–7, 74, 98 computed tomography (CT) 140 downlink frequency 107
attenuation 104, 105, 139 conduction of sound 138 drift velocity 27
audio frequency amplifier 101 conductors 27, 28 driven (forced) oscillations 21
audiograms 138 cone cells 83, 84, 85 DVDs, storage on 80
average intensity 45, 49 conservation of colour 149 dwarf planets 87
Avogadro’s number 17 conservation of energy 15, 58, 69
violation 147, 149 ears 136, 137, 138
B-scan (brightness modulated) 141 conservation laws for quantum numbers 146 Earth 16, 49, 112
bandwidth 99, 100, 103 conservation of momentum 14 eclipsing binaries 89
baryon number 146 constant acceleration 10 effective half-life 143
baryons 145, 146, 147 constellations 87 elastic collisions 15
batteries 29 control rods 43 elastic potential energy 15

Index
212

electric current see current of particles 153 gravitational 32, 33, 53, 56
electric fields 33, 34 and phase changes 18 magnetic forces 35
charged particles in 35 of photons 37 in nuclei 37, 38, 40
and electron drift velocity 27 potential see potential energy in simple harmonic motion 20
of light 65–6, 67, 111 in pump storage systems 46 see also interactions
and potential 54 quanta of 36, 72, 74 fossil fuels 42
electric force 32, 33, 37, 38 in relativity 129 free electrons 27
electric potential 53–4 in simple harmonic motion 20 frequency 20, 21
electric potential energy 55 solar power gives 45 cyclotron frequency 150
electricity production 42, 43, 71 and specific heat capacity 18 and Doppler effect 62
electromagnetic induction 68–71 thermal see thermal energy of light 72, 131, 132, 133
electromagnetic interaction 147, 149 and uncertainty principle 75, 147 of photons 37
in string theories 156 waves transfer 22–4, 61, 65, 111 and satellite communications 107
electromagnetic radiation 48, 72, 111 of X-rays 120, 139 sideband frequencies 99
see also gamma rays; light; X-rays energy density 42 of ultrasound 141
electromagnetic spectrum 22, 111 energy levels and waves 22
electromagnetic waves 22, 111–22 of electrons in atoms 36, 37, 75, 120 frequency deviation constant 100
electromagnetism, laws of 123 of hydrogen 74 fuels 42, 43, 44
electron cloud 74 of molecules 50 fundamental units 1
electrons nuclear 77 fusion 41, 44, 87
in atoms 36, 74, 112 and stimulated emission 112
as beta particles 38, 39, 77 energy sources 42 gain in op-amps 107, 108, 109
in charged-coupled devices 81, 82 engine efficiencies 42 galaxies 87, 93, 98
energy of 74, 75 entropy 59 gamma factor (relativity) 124
in excited states 112 equations of motion 10 gamma radiation 38, 39, 77
on Feynman diagrams 148, 149 equations of straight lines 4 in cancer treatment 144
in fields 35 equilibrium 11, 17 gas constant 57
free electrons 27 equipotential surfaces 54 gases 17, 19, 57
lepton number of 146 error bars 3 see also vapours
in photoelectric effect 72 escape speed 56 general relativity 131–5
wave nature of 73–4, 75 event horizon 135 generators 70
X-rays produced by 120 exchange particles 145, 147 geodesics, light travels on 134
electronvolt 27 excited states 112 global warming 49–51
electrostatic law, Coulomb’s 32 expansion of gases 58 gluons 147, 149, 154
elementary particles 145, 156 exponential change 4, 39, 77 gradients see slopes
elements 89, 96 exposure 143 graphs 3–4
emf 29–30 eyes 83–4 of ac values 70
induced 68–9, 70 activity-time 39
emission spectra 37 far point 84, 115 of binding energy 40
emissivity 48 Faraday’s law 68 force-distance 15
encryption 101 feedback mechanisms 51 force-time 14
endoscopy 142 fermions, spin of 146, 147 I-V characteristics 28
energy 15, 17, 28 Feynman diagrams 147, 148, 149 of motion 10, 52
of alpha particles 39, 77 field lines 54 P-V 57, 58, 59
of beta particles 39 field patterns 34 power-temperature 48
binding energy (B.E.) 40, 41 field strength 35, 54 of simple harmonic motion 20
black bodies absorb 48 fields 33–5, 52–6 spectral response 84
conservation see conservation of energy electric see electric fields of wave motion 23, 24
dark energy 95 gravitational see gravitational fields gravitation, quantum 156
in electricity production 42, 43, 46 magnetic see magnetic fields gravitational fields 33, 34
of electrons 74, 75 filters, light 85 and field lines 54
equivalence with mass 129 fission 41, 43 and general relativity 131–2
in fission 41, 43, 44 floppy discs, storage on 80 motion in 52, 56
in fusion 41, 44, 87 FM (frequency modulation) 100 and potential 54
of gamma radiation 39, 77 focal length of eye lenses 84 and work done 53
internal energy 17, 58 focal points 113 gravitational force 32, 33, 53, 56
kinetic see kinetic energy forces 11–13, 16 gravitational lensing 134
and motion 52, 56 electric 32, 33, 37, 38 gravitational potential 53–4, 56
in optical fibres 105 and gas pressure 19, 57 gravitational potential energy 15, 55

Physics for the IB Diploma


213

gravitational redshift 131, 133 isotopes 37 magnification 113, 114, 115


gravitational time dilation 132, 133 radioisotopes 139, 143, 144 angular 116, 117
gravity 32 and CCDs 82
and fusion, in stars 87 Kepler’s third law 56 magnifiers 115–16
greenhouse effect 49–50 kinetic energy 15, 17, 35 magnitude of stars 87, 88
ground state 112 in electricity production 42, 43 main sequence 90, 96, 97
of electrons 27, 72 Malus’ law 66
hadrons 145, 146, 151 of molecules 17, 155 mass 12, 14
Hafele-Keating experiment 127 and motion in uniform fields 52 critical mass 43
half-life 39, 78, 143 of a particle in cyclotron 150 equivalence with energy 129
half-value thickness 139 of particles 153 and gravitational fields 33, 34, 54
hard discs, storage on 80 relativistic 129 and gravitational forces 32, 33, 56
harmonics 60 in simple harmonic motion 20 molar mass 17
hearing 137, 138 kinetic model of gases 19 in the standard model 154
heat 17, 18 of stars 96, 97
see also thermal energy lasers 112, 142 mass defect 40, 41
heat exchanger 43 LDR (light-dependent resistor) 31 mass number 17, 37
Heisenberg uncertainty principle 74, 75 length contraction 125, 127 mass spectrometers 76
time and energy in 75, 147 lenses 113–18, 121 matter 73, 95, 155
helium 38, 96 eye lens 83, 84 measurements 1–8
Hertzsprung-Russell diagrams 90, 97 Lenz’s law 69 mechanical energy 15
Higgs particle 151, 154 lepton number 146, 153 mechanical waves 22
Hubble’s law 98 leptons 145, 146, 148 mechanics 9–16
hydroelectric power 46 light 37, 85 relativistic 129–30
hydrogen in stars 87, 89, 96 in charged-coupled devices 81 medical physics 136–44
dispersion of 104, 105, 111 mesons 145
ideal gases 17, 19, 57 Doppler effect for 62 metals, conductivity of 28
images 113–16, 117 in the eye 84, 85 meters, uncertainties in 5
in charged-coupled devices 81 frequency of 72 Michelson-Morley experiment 127
X-ray, sharpness of 140 in general relativity 131–2, 133 microscopes 117
imaging, medical 139–42 in photoelectric effect 72 microwave radiation 94
impedance matching 136, 141 polarisation of 65–7 Milankovitch cycles 50
impulse 14 refraction of 25 mobile phone systems 110
induced emf 68–9, 70 speed of see speed of light moderators 43
information signal waves 99, 100 travels on geodesics 134 modulation 99100
infrared radiation 48, 49, 50 see also ray diagrams modulation index 100
insolation 45 light curve 89 molar mass 17
insulators 27 light year 87 molecules 17, 74, 155
intensity 49 light-dependent resistors 31 moles 17, 57
average intensity 45, 49 line of best fit 2 momentum 14, 22
of light, and photoelectric effect 72 linear accelerators 151 of electrons 74, 75
of sound 137 liquid crystal displays 67 relativistic 129
two-slit interference pattern 119 liquids 17, 18, 19 motion 9–16
of waves 22, 63 longitudinal waves 24 and Doppler effect 62
see also transmitted intensity loud sounds, exposure to 138 in fields 35, 52, 56
interactions 147–8, 149, 154 loudspeaker 101 MRI 142
in string theories 156 luminosity 87, 88, 91, 96 muon decay experiments 127
interference 26, 63, 118–19 on Hertzsprung-Russell diagrams 90, 97
on CDs 79 natural frequency 21
thin-film 121–2 magnetic field strength 35 near point 84, 115, 116
intermolecular forces 17, 57 magnetic fields 34, 35, 68 negative feedback 51
intermolecular potential energy 17 and electricity generation 70 net (resultant) force 11
internal energy 17, 58 of light 111 neutrinos 44, 146
internal resistance 29 in particle accelerators 150, 151 neutron stars 96
inverting amplifiers 108 proton spin, and MRI 142 neutrons 37, 43, 44
ionising radiation 38 magnetic flux 68–9, 70 and mass defect 40
isobaric changes 58 magnetic flux linkage 68 and nuclear stability 38
isochoric changes 58 magnetic forces 35, 150 nodes 60
isothermal changes 58, 59 magnets, field around 34 noise 100, 104, 105

Index
214

and hearing loss 138 photons 37, 50, 74 radiation 48


non-inverting amplifiers 109 on Feynman diagrams 147, 148, 149 cosmic microwave background 94
non-renewable energy sources 42 of gamma radiation 38, 39 electron transitions emit 36
nuclear energy levels 77 in MRI 142 laser emission of 112
nuclear fuels 42, 43, 44 in photoelectric effect 72 in medicine 139–40, 143–4
nuclear magnetic resonance imaging 142 photopic vision 84 quantum nature of 72
nuclear power 42, 43–4 piezoelectricity 141 solar 49
nuclei 36, 37–41, 44 pixels 81 stars emit 87
density of 76 Planck constant 73 see also electromagnetic radiation;
discrete energy levels in 77 planetary nebula 96 radioactivity
electron cloud around 74 planets 56, 87 radio frequency amplifier 101
formation, after the Big Bang 98 plasma 44 radio receivers 101
nucleon number 37 plutonium 44 radio waves 96, 142
nucleons 37, 40 polarisation 65–7 communications with 106, 110
nuclide 37 polarisers 65–6, 67 radioactive decay law 39, 78
Nyquist frequency 102 population inversion 112 radioactive waste 44
positrons 44, 139, 148 radioactivity 38–9, 78
Ohm’s law 28 potential difference 27, 28, 29 in medicine 143, 144
Olbers’ paradox 93 accelerating particles with 129 radioisotopes 139, 143, 144
operational amplifiers 107–10 see also voltage rarefaction 24
Oppenheimer-Volkoff limit 96 potential dividers 31 ray diagrams 113–15, 116, 118
optical activity 67 potential energy 15, 17, 55 thin-film interference 121
optical fibres 104, 105, 106 and motion, in uniform fields 52 X-ray diffraction 121
in endoscopy 142 in simple harmonic motion 20 Rayleigh criterion 64
optical pumping 112 potential well 56 Rayleigh scattering 111
orbital motion 56 power 15, 28, 29, 49 rays 24
order of magnitude estimates 8 in ac circuits 70 real gases 57
oscillating water column 47 and black bodies 48 real images 113, 114
oscillations 20, 21 and luminosity 87 red giants 90, 98
of the Sun 45 redshift 62, 131, 133
P-V diagrams 58, 59 power loss 71, 105 reference frames 123
pain threshold 137 power relations, graphs from 4 reflection 25, 66, 104
pair annihilation 148, 155 precise measurements 2 of sound 136, 141
parallax method 91 pressure in gases 19, 57–9 refraction 25
parallel circuits 30 primary colours 85 refractive index 104, 111, 121
parallel-to-serial converter 102 principal axis 113 relativistic mechanics 129–30
parsec 87, 91 projectiles 52, 56 relativity 123–35
particle accelerators 150–1 proper length (rest length) 125 renewable energy sources 42
particle in the box model 75 proper time interval 124 renormalisation 156
particle detectors 152 proton number 37 resistance 27, 28, 29
particle physics 145–55 protons 37 in op-amps 107, 108
particles 35, 36–7, 76 in the Large Hadron Collider 151 in parallel circuits 30
accelerating 129, 150–1 and MRI 142 and power loss in transmission 71
at the Big Bang 98 quarks in 145, 154 resistivity 28
energy of 153 and radioactivity 38, 39, 40 resistors 28, 29, 31
light photons as 72 pulsars 96 resolution 64, 82
wavelength of 73, 75 pulse oximetry 142 resonance 21
see also electrons; nuclei pump storage systems 46 rest energy 129, 153
Pauli principle 147 pupils (eyes) 83, 84 rest frame of an object 123
percentage uncertainty 2 rest mass 129
period 20, 21, 22 quality factor 143 resultant force 11
in circular motion 16, 56 quanta 36, 72, 74 rms values 70
cyclotron period 150 quantisation levels 102 rod cells 83, 84
of revolution of binary stars 89 quantum efficiency (QE) 82
PET scanning 139 quantum gravitation 156 sample-and-hold 102
phase changes (light) 121 quantum numbers 146 sampling frequency 102, 104
phase changes (matter) 18 quarks 145, 146, 147 satellites 56, 106, 107
photodiodes 105 evidence for 154 scalars 7
photoelectric effect 72 on Feynman diagrams 148 scattering 111, 154

Physics for the IB Diploma


215

Schmitt triggers 109–10 fusion in 41, 87 gravitational 132, 133


Schrödinger theory 74 life of 96–7, 98 near black holes 135
Schwarzschild radius 135 Stefan-Boltzmann law 48, 87 time division multiplexing 104, 110
scientific notation 1 stellar clusters 87 total energy 129
scotopic vision 84 stellar spectra 89 total internal reflection 104
sea-level changes 51 stimulated emission 112 total mechanical energy 15
semiconductors 45 stopping down 118 transformers 70, 71
sensory nerve deafness 138 stopping potential 72 transmittance curves 50
serial-to-parallel converter 102 storage devices compared 80 transmitted intensity 66, 139
series circuits 29 straight-line graphs 4 transverse waves 23, 65
sideband frequencies 99, 100 strangeness (quantum number) 146 travelling waves 23, 60, 61
sight 84–5 stress analysis 67 tuning circuit 101
signal-to-noise ratio 100, 105 string theories 151, 156 twin paradox 128
signals 79, 101–4, 109–10 strong interaction 147, 154, 156 two-source interference 26, 118–19
ultrasound 141 strong nuclear force 37, 38, 40
significant figures 1 Sun 56, 89 ultrasound 141
simple harmonic motion 20, 23 power from 42, 45, 49, 50 uncertainty in measurements 1, 2, 5, 6
simultaneous events 126 as a star 87, 90, 97 uncertainty principle 74, 75, 147
sky, colour of 112 super red giants 90, 96 uniform circular motion 16
sky waves 106 supernova 96 uniform gravitational fields 52
slits 63, 118–19 superposition 26, 60 units 1, 129
slopes/gradients 3, 6, 10 supersymmetric particles 151 universal gravitational constant 32
Snell’s law 25, 104 surface area and evaporation 19 universe 93–5, 98, 155
solar activity 50 surface heat capacity 49 uplink frequency 107
solar constant 45 surface temperature of stars 89, 91 uranium 42, 43, 44
solar power 42, 45 and expansion of stars 96
solar radiation 49, 50 on Hertzsprung-Russell diagrams 90, 97 vacuum 147
solar system 87 surface waves 106 vapours 17, 18
solenoids, field around 34 synchrotron 150 see also gases
solids 17, 18 vectors 7, 11, 14
sound 24, 62, 136–8 telephone communications 104, 110 velocity 9, 10, 14, 16
space waves 106 telescopes 117 relativistic 128, 129
spacetime, curved 134–5 temperature 17, 18 in simple harmonic motion 20
special relativity 123–30 of the early universe 155 in uniform gravitational fields 52
specific heat capacity 18 and evaporation 19 see also drift velocity; speed
specific latent heat 18 in gases 57–9 virtual images 113, 115–16
spectra 37, 89 and global warming 50–1 virtual particles 149
electromagnetic 22, 111 and kinetic energy of molecules 17, 155 voltage 70, 71, 81
X-ray 120 and power emission 48 in op-amps 107, 108, 109
spectral class of stars 90 and surface heat capacity 49 Schmitt triggers 110
spectral lines 37, 74 see also surface temperature of stars see also potential difference
spectral response graphs 84 temperature scale, absolute 17 volume of gases 57–9
spectroscopic binaries 89 thermal capacity 18
spectroscopic parallax method 91 thermal energy 15, 17 water waves, refraction of 25
speed 9, 16 in electricity production 42, 43, 44 wave nature of matter 73
escape speed 56 and laws of thermodynamics 58, 59 wave power 47
of molecules 19 and surface heat capacity 49 wave speed 22
of waves 25 thermal equilibrium 17 wavefronts 24
see also velocity thermal physics 17–19 wavefunctions 74
speed of light 25, 37 thermistors 31 wavelength 22
and evidence for relativity 127 thermodynamics 58–9 in emission spectra 37
as universal constant 123 thin-film interference 121–2 of emitted X-rays 120
spherical aberration 118 threshold frequency 72 of particles 73, 75
spin 146 threshold of hearing 137 of photons 37
spontaneous emission 112 tidal energy 42 waves 22–6, 60–7, 111–22
standard candles 88 time 10, 16 weak interaction 147, 149, 156
standard model 145, 154 and uncertainty principle 75, 147 weight 13, 32
standing waves 60, 61, 156 see also frequency; period white dwarfs 90, 96
stars 87–9, 91 time dilation 124–5, 127 Wien’s law 89

Index
216

wind power 46
work done 15, 57, 58
in circuits 29
in fields 53, 55
and intermolecular forces 17
and potential difference 27, 28, 35
work function 72

X-rays 120–1, 139–40, 144

Physics for the IB Diploma

Das könnte Ihnen auch gefallen