Beruflich Dokumente
Kultur Dokumente
Numbers at the right-hand margin indicate marks. (Answer all the questions)
All parts of a question should be answered at one place.
1. In the network shown in Fig. 1, the switch is moved from position 1 to Position 2 at
t = 0. Prior to t = 0, the circuit had been in steady state. Find out i1(t) and i2(t) after
the switch position changes to Position 2 at t = 0. The values of the batteries V1 and
V2 are V1 = 2 V, V2 = 3V; and the elements values are as follows: L = 1 H, C= 0.5 5
F, R1 = 0.5 Ω and R2 = 2 Ω.
Fig. 1
2. For the circuit below in Fig. 2, the switch S1 has been closed for a long time
while switch S2 is open. Now switch S1 is opened and then at time t=0
switch S2 is closed. Determine the current i(t) as indicated. (Solve this
problem using both time domain classical differential equation)
5
Fig. 2
3. For the transformer circuit shown in Fig. 3, the switch closes at t = 0. Find i1(t) and
i2(t). Assume zero initial energy.
5
Fig. 3
In the series RLC circuit shown in Fig. 4, the applied voltage is v(t) = sin t for t > 0.
4.
For the element values specified, find i(t) if the switch K is closed at t = 0.
Fig. 4
Pole-zero diagram of F(s) is shown in Fig. 5.
5.
a) Evaluate the residues of F(s).
b) Using inverse Laplace transform find out the time domain signal f(t).
Fig. 5
Find the Laplace transform of the waveforms shown in Fig 6. below. Use the
6. Laplace transform formula for periodic waveforms.
Fig. 6