Beruflich Dokumente
Kultur Dokumente
Faculty of Engineering
Department of Electrical and Electronics Engineering
TEEE4103. Power System Management
Assignment 1
A 200-kW, 0.8 lagging power factor load currently draws power from a 400-
V, 60-Hz infinite bus. A 400-V, ∆-connected generator with synchronous
reactance of 1.0 Ω is to be connected in parallel with an infinite bus to take
over the load. Copper losses are negligible.
a) What is the current drawn from the infinite bus (IB) before the
generator is paralleled?
Page 1 of 2
d) If the governor set point is adjusted such that the generator is
now supplying 90% of the real power, find the current supplied
by the generator and the infinite bus.
Question (2)
After all real power requirements of the load has been transferred to the
generator in Question (1), we now adjust the field current to do the same for
the reactive power requirements. Assuming, 50% of the reactive power has
been transferred, calculate
Question (3)
END
Page 2 of 2