Sie sind auf Seite 1von 5

1.7335 http://www.woite-edelstahl.com/17335en.

html

M N .: 1.7335

D
EN symbol 13 CrMo4-5 (alt.13CrMo4-4) Density kg/dm3 7,85
(short)
Hardness HB 30(lenghtwise 130-175
UNS K 11562 <=60mm)
Grade P12 / T12
Composition Alloyed stainless steel
UNS K 11597
Grade P11 / T11 Category High-temperature
steel
AFNOR 13 CrMo4-5 /NF EN 10216-2 (08/2007) (FR)
Structure
BS 13 CrMo4-5 /B.S. EN 10216-2 (08/2007)
(GB)

C C
C Si Mn P S Cr Cu Mo N Ni Al
1.7335 Min % 0.10 0,40 0,70 0,40
Max % 0,17 0,35 0,70 0,025 0,020 1,15 0,30 0,60 0,012 0,30 0,040
(Key to steel 2010) 1.7335 (DIN EN10216-2)
K 11562 Min % 0,05 0,30 0,80 0,44
Max % 0,15 0,50 0,61 0,025 0,025 1,25 0,65
UNS K11562(ASTM A 335/213 -P12/T12)
K 11597 Min % 0,05 0,50 0,30 1,00 0,44
Max % 0,15 1,00 0,60 0,025 0,025 1,50 0,65
K 11597 (ASTM A335 /213-P11/T11)

P
Property Value

Density: kg/dm3 7,85

Hardness: HB 30(lenghtwise 130-175


<=60mm)
Elongation A5(%) >=22-lengthwise /
>=20-transverse

1 of 5 03/09/2019, 11:07
1.7335 http://www.woite-edelstahl.com/17335en.html

magnetizable Yes

Temperature T Specific heat Thermal conductivity Electric resistance Modulus of elasticity Expansion rate from 70°F bis T
°C/F J / kgK W/mK µΩ · cm kN/mm2 10-6 / K
(°C/F) (Btu / lb °F) (Btu·in / ft2·h·°F) (Ω circ mill / ft)
(103 ksi) (10-6 / °F)
20° / 68 622 / (---) 33/(---) 210/(---)
300 / 572 185/(---) 12,9/(---)
400 / 752 175 /(--)
500 / 932 165/(---) 13,9/(---)
600 / 1112 14,1/(---)

Temp. Creep strain limit Creep strain limit Creep rupture strength Creep rupture strength Creep rupture strength
°C/ °F 10 000 h 100 000h 10 000 h 100 000 h
Rp1.0 (Mpa)/ ksi Rp1.0 (Mpa)/ ksi Mpa /ksi Mpa /ksi
450/ 842 245/ 35,5 191 /27,7 370 / 53,6 285 / 41,3
500/ 932 157 / 22,7 98 / 14,2 239 / 34,6 137 / 19,8
550/ 1022 76 / 11,0 36 / 5,2 109 / 15,8 49 / 7,1
600/ 1112 49 / 7,1 20 / 2,9
ksi value calculated

Temperature 0,2% Yield strength


in high temperatures
°C / °F Rp 0,2
Mpa /ksi
100 / 212 264 / 38,2
260 /500 118,6 / 17,2
371 /700 107,6 / 15,6
426,6 /800 104,4 /15,0
482,2 /900 88,2 / 12,8
537,8 /1000 43,4 / 6,3
593,3 /1100 19,3 / 2,8
648,9 /1200 8,3 / 1,2

2 of 5 03/09/2019, 11:07
1.7335 http://www.woite-edelstahl.com/17335en.html

ksi value calculated

M (20°C / 68°F)
Yield strength MPa/ksi 220 /32 ASTM A335- P12
0,2 %Yield strength Rp 0,2 (Mpa) (ksi) 290 / 42 Wst.No.1.7335
Tensile strenght Rm (Mpa) / (ksi) 450-600 /65,2-87,0 llongitudinal(<60mm) Wst.No.1.7335
Elongation(A5) (%) >=22% longitudinal(<=60mm) Wst.No.1.7335
>=20% transverse(<=60mm)
ISO-V Notched impact strength /Charpy-V) >=27J longitudinal(<=60 mm) Wst.No.1.7335
Tensile strenght Rm Mpa/ksi 415/ 60 ASTM A335- P12

T
Application area
Operation temperature 14 ºF to 1058 ºF according to AD specifications W1

Normalizing
Working temperature 1652 ºF to 1760 ºF
Explanation report cool down: air

Solution heat treatment


Working temperature 1562 ºF to 2012 ºF

Normalizing
Working temperature 1634 ºF to 1742 ºF
Explanation report cooling-down:air,water ,Oil

annealing
Working temperature 1166 ºF to 1346 ºF
Explanation report cooling-down:air
Processing informations hold temperature through entire cross section for appropiate time

tempering

3 of 5 03/09/2019, 11:07
1.7335 http://www.woite-edelstahl.com/17335en.html

Working temperature 1634 ºF to 1742 ºF


Explanation report quenching: oil/air

S /
Standards Desciption
ASTM A 182 Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges,Forged Fittings and Valves and Parts
for High-Temperature Service
ASTM A 213 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler,Superheater,and Heat-
Exchanger Tubes
ASTM A 335 Standard Specification for Seamless Ferritic Alloy -Steel Pipe for High-Temperature apllications
DIN EN 10028-2 (09/2009) flat products made from steel for pressure tanks non-alloy and alloy steels with set properties in high
temperatures
DIN EN 10216-2 (10/2007) seamless steel pipes under compression load; pipes out of non-alloyed and alloyed steel with set
properties in high temperatures
DIN EN 10216-2(10/2007) Stanless steel tubes for pressure purposes. Non-alloy and alloy steel tubes with specified elevated
temperature properties
SEW 310 (08/1992) physical properties of steel

P
Cold forming cold forming well possible,
may require stress relief annealing for strong distortions (read AD data sheet)

Welding
- Material classification acc. 5.1
CEN ISO/TR 15608
- Type well weldable with all techniques
- Hints pre-heat to 392°F if material width >0.4"

M
Details of application
Certifications
Power plants header
Sammler-,Siede-,Überhitzungsrohre,Heißdampfleitungsrohre
Apparatus engineering
crude oil

4 of 5 03/09/2019, 11:07
1.7335 http://www.woite-edelstahl.com/17335en.html

R
Product type Product
Processing / Construction from pipes, fittings, flanges (welded)
Plates / Sheets plates/sheets
plate/sheet cuts
Fittings welded elbows
welded reductions
Welded T-pieces
seamless elbows
seamless reductions
seamless T-pieces
Other Fittings a.o. Weldolets, Nipples
Flanges / Collars / Flared tube various flanges (weld neck flange,blind flange etc.)
ends
Bumped boiler ends / caps / from sheets
round blanks from bar steel
Pipes / Tubes welded pipes/tubes
seamless pipes/tubes
Bar steel round bar steel

L
All aforementioned specifications serve as a general orientation and have to be reviewed depending on the conditions of use.
(c) 2012 M. Woite GmbH, Postbox, D-40671 Erkrath | Phone +49 (211) 24 40 91 - Fax +49 (211) 24 92 28 | www.m-woite.com - woite@woite-edelstahl.com

5 of 5 03/09/2019, 11:07

Das könnte Ihnen auch gefallen