Sie sind auf Seite 1von 4

TECHNICAL CHARACTERISTICS:

Tendency of catering: + 12V/1A DC

Frequency of emission at AM: ~27MHz

Force of expense: 2,5W

Materially:

The resistances are 1/4W.

R1 10KW

R2 100KW
R3 39W

R4 180W

R5 4,7KW

R6 1MW

R7 3,9KW

C1, C9, C10 100nF polyester

C2 33pF ceramic

C3 470pF ceramic

C4 4,7nF polyester

C5 1nF ceramic

C6 10-60pF trimmer

C7 220nF polyester

C8 10mF/25V electrolytic

C11 47mF/25V electrolytic

C12 1,5nF ceramic

J1, J2, J3 VK200 (inductor of high frequencies).

L1, L2 Wires of coper (smaltwme'na) with diameter 0,4mm wrapped in


plastic support of diameter 6-7mm of perjstrofjkoy' core. For the L1
you wrap 13 coils. For the L2 you wrap 4 coils. (As in the receptor
CB.)

L3 Wrap 20 coils cupreous wire of (0,3-0,4mm diameter) convolution


round a resistance 2,2W/2W of coal.

Q1, Q2 BC108

Q3 BD139

Q4 2N4427 (it is not replaced)

Q5 BD329 (or 2N3553)

Y1, Y2? Crystal hails. (You can you put the so much, those who also channels
that you want you emit). See here.

MIC microphone with preamplifier.

ANT1 Aerial for CB (For the trials is enough a piece wire of few metres but
better connects a regular aerial so that does not have many stagnantly
and burns the transmitter).

S1 (Choice of receptor of - transmitter, if you combine the transmitter


with the receptor CB, you are supplied the receptor from exit 12V
OUT)

S2 Switch of choice of channel. It has so much places, those who also the
channels that you want pja'nete.(Kaly'tera he is mechanically
connected with the S1 of receptor for simultaneous change of
channels).

Charge 50W:
Materially:

R1, R2 100W/2W

C1 47nF ceramic

C2 4,7nF ceramic

J1 VK200 (inductor of high frequencies).

D1 Passage of germanium (AA119 or OA92 or..).

Regulations:

For the regulation it needs a voltmeter (with needle better) and charge 50W/5W.

1. Connect charge 50W in the place of aerial, with the voltmeter in the exit
voltmeter.

2. Be supplied the transmitter with + 12V. It will be supposed we have consumption


between 0,7-1A.

3. With a screwdriver we regulate the core of inductor L1/L2 and later the variable
C6 until we see the biggest tendency

4. We connect the microphone and speaking we observe the clue in the multimeter.
If all have become right will be supposed the tendency, speaking, to go up roughly
30-35%.

Das könnte Ihnen auch gefallen