Beruflich Dokumente
Kultur Dokumente
iPixel
iPix el LED
LEDLEDLight
Light Co.
Co. , ,Ltd
Ltd
SM16716
DESCRIPTION PACKAGE
The SM16716 is an LED driver designed for
decoration lighting and spot lighting system, and offers
three-channel constant rcruent cirictruy, rtehe -
independent dimming control circuitry.
FEATURES
Three channel open -drain output, max output SOP16
current: 60mA
Output max isolation voltage: 26V
Self-innovation PCCM cnostant crurent rdiver
technology, current accuracy: <±5%
Internal LDO voltage regulator circuit, supply PIN SETTINGS
voltage range: 3.3—6.0V
Two-line self-correction shift bus and max serial -in
clock frequency: 30MHz
Converting gray data to 256 -step data output by
internal PWM technology
PACKAGE: SOP16
ESD HBM:>4KV
APPLICATION
Indoor LED decoration lighting
Building LED decoration lighting
Wall washing
Shine word led lighting
Led tube lamps
- 1 -
Add: A2 Building Ming Jin hai Industrial Park,Zhou shi Rd ,Shiyan,Baoan,Shenzhen,China. 518108
1 / 15
Tel: 0086-755-85257292 Web: www.ipixelleds.com Fax:0086-755-85257292 E-mail: inquiry@ipixelleds.com
iPixel
iPixel
iPix el LED
LEDLEDLight
Light Co.
Co. , ,Ltd
Ltd
BLOCK DIAGRAM
PIN DESCRIPTIONS
Symbol Name No. Description
NC No Connect 2,13
DCLK Clock input 4 Serial clock input port. It has an internal pull-up resister.
FB1,FB2,FB3 Feedback input 6,8,10 It is a current setting port in constant current mode
GND ground 9
- 2 -
Add: A2 Building Ming Jin hai Industrial Park,Zhou shi Rd ,Shiyan,Baoan,Shenzhen,China. 518108
1 / 15
Tel: 0086-755-85257292 Web: www.ipixelleds.com Fax:0086-755-85257292 E-mail: inquiry@ipixelleds.com
iPixel
iPixel
iPix el LED
LEDLEDLight
Light Co.
Co. , ,Ltd
Ltd
ELECTRICAL DATA
Maximum ratings(Ta = 25℃)
PD PD 600 mW
5.0V
Pw Pout 350 mW
IOL 50 60 70 mA
UT VDIN=0V
- 3 -
Add: A2 Building Ming Jin hai Industrial Park,Zhou shi Rd ,Shiyan,Baoan,Shenzhen,China. 518108
1 / 15
Tel: 0086-755-85257292 Web: www.ipixelleds.com Fax:0086-755-85257292 E-mail: inquiry@ipixelleds.com
iPixel
iPixel
iPix el LED
LEDLEDLight
Light Co.
Co. , ,Ltd
Ltd
Timing characteristics(Ta = 25℃)
符号 最小 典型 最大 单位 测试条件
Tr 80 ns IOUT=20mA
Output fall/rise time
Tf 80 ns IOUT=20mA
- 4 -
Add: A2 Building Ming Jin hai Industrial Park,Zhou shi Rd ,Shiyan,Baoan,Shenzhen,China. 518108
1 / 15
Tel: 0086-755-85257292 Web: www.ipixelleds.com Fax:0086-755-85257292 E-mail: inquiry@ipixelleds.com
iPixel
iPixel
iPix el LED
LEDLEDLight
Light Co.
Co. , ,Ltd
Ltd
FUNCTION DESCRIPTION
1. First start frame data (50 ‘0’s, ‘0’ is zero) is send, and data frames (led display data) are send in turn. Start frame and data
frame is MSB first shift, each bit is send over rising edge of DCLK.
2. The first data frame is belong to the LED near to the shift port. Data format: 1Bit “1” + three 8Bits gray display data.
3. After all display data is send, the pulse of DCLK is send additionally. The pulse number is equal to SM16716 number. Then
display data is valid. When the pulse of DCLK is send, the sign of data is hold ‘0’.
SERIAL DATA CASCADE
Serial data cascade distance maybe long between ICs in system. So SM16716 adopts two -wire self-correction transfer
protocol in order to eliminate signal competition. In addition, push -pull circuit is designed in DOUT port and DCLKO port , in
order to cascade two ICs by 6 meters wire at 2MHz clock state. To avoid reflection of serial sign, the resister(50Ω) is
cascaded between DOUT and DCLKO.
256-STEP DIMMING PWM OUTPUT
SM16716 adopts 8 bits, 256 steps PWM output protocol. Due to adopt two-wire self -correction transfer protocol,
SM16716 can support high-speed data transfer. In application, SM16716 is applied to video playback.
If display data bits is lower than 8 bits, you can correct display data by gamma-correction.
- 5 -
Add: A2 Building Ming Jin hai Industrial Park,Zhou shi Rd ,Shiyan,Baoan,Shenzhen,China. 518108
1 / 15
Tel: 0086-755-85257292 Web: www.ipixelleds.com Fax:0086-755-85257292 E-mail: inquiry@ipixelleds.com
iPixel
iPixel
iPix el LED
LEDLEDLight
Light Co.
Co. , ,Ltd
Ltd
After the display data is corrected by gamma-correction, display effect is better than before.
APPLICATION
CONSTANT VOLTAGE MODE(sink driver)
VCC
VLED
VOUT
RL RL RL RL RL RL
OUT1
OUT2
OUT3
OUT1
OUT2
OUT3
DIN DIN DOUT DIN DOUT
VDD
DCLK
DCLK
DCLKO DCLK DCLKO
VDD
VOUT
VOUT
VDD
VDD
FB1
FB2
FB3
FB1
FB2
FB3
C C
When OMODE=’1’, VCC must be less than 12V and output current is less than 40mA. If VCC is less than 7.0V, you can
remove the units in the dashed box and directly connect IC’s VDD to supply VCC.
RL = (VCC—CLED—EOUT)/ILED
RL is a current limiting resister, VCC is LED supply, VLED is the sum of all LED forward voltage, Vout is the saturation voltage
of OUT(about 0.4~0.8V), Iled is current of LED, less than 20mA.
SM16716 has a good driver capability. You can refer to right diagram when design led driver
V CC
Note:
PD=ILED1*VOUT1+ILED2*VOUT2+ILED3*VOUT3+PIC
PIC is IC’s operation power consumption, less than 25mW。
V L EDX
V O UTX
RL RL O UTX
- 6 -
Add: A2 Building Ming Jin hai Industrial Park,Zhou shi Rd ,Shiyan,Baoan,Shenzhen,China. 518108
1 / 15
Tel: 0086-755-85257292 Web: www.ipixelleds.com Fax:0086-755-85257292 E-mail: inquiry@ipixelleds.com
iPixel
iPixel
iPix el LED
LEDLEDLight
Light Co.
Co. , ,Ltd
Ltd
CONSTANT CURRENT MODE(sink driver)
VCC
VLED
VOUT
RL RL RL RL RL RL
OUT1
OUT2
OUT3
OUT1
OUT2
OUT3
DIN DIN DOUT DIN DOUT
VDD
DCLK
DCLK
DCLKO DCLK DCLKO
VDD
VOUT
VOUT
VDD
VDD
FB1
FB2
FB3
FB1
FB2
C C FB3
RX RX RX RX RX RX
This mode is same to constant voltage, and the FB port has a setting-current resister only(RX).
ILED = VFB/RX (VFB =0.75V)
80.0
70.0
60.0
50.0 Iout1(mA)
ILED(mA)
40.0 Iout2(mA)
30.0 Iout3(mA)
20.0
10.0
0.0
10 20 32 40 50 60 70
RFB(ohm)
- 7 -
Add: A2 Building Ming Jin hai Industrial Park,Zhou shi Rd ,Shiyan,Baoan,Shenzhen,China. 518108
1 / 15
Tel: 0086-755-85257292 Web: www.ipixelleds.com Fax:0086-755-85257292 E-mail: inquiry@ipixelleds.com
iPixel
iPixel
iPix el LED
LEDLEDLight
Light Co.
Co. , ,Ltd
Ltd
When OMODE =’0’, the output of SM16716 is source driver. This mode is applied to the high voltage led -string which
driver by high voltage NPN transistor.
RL = (VCC-VLED-VCE)/20mA
- 8 -
Add: A2 Building Ming Jin hai Industrial Park,Zhou shi Rd ,Shiyan,Baoan,Shenzhen,China. 518108
1 / 15
Tel: 0086-755-85257292 Web: www.ipixelleds.com Fax:0086-755-85257292 E-mail: inquiry@ipixelleds.com
iPixel
iPixel
iPix el LED
LEDLEDLight
Light Co.
Co. , ,Ltd
Ltd
CONSTANT CURRENT MODE 2
This mode is same to sink driver mode( OMODE=’1’), but led is driver by NPN transistor reference to top diagram.
ILED=IO(RB=5K)
The max voltage of supply is depended on Vceo of the NPN transistor (general,Vceo>25V).
- 9 -
Add: A2 Building Ming Jin hai Industrial Park,Zhou shi Rd ,Shiyan,Baoan,Shenzhen,China. 518108
1 / 15
Tel: 0086-755-85257292 Web: www.ipixelleds.com Fax:0086-755-85257292 E-mail: inquiry@ipixelleds.com
iPixel
iPixel
iPix el LED
LEDLEDLight
Light Co.
Co. , ,Ltd
Ltd
PACKAGE
SOP16
MILLIMETERS INCHES
DIM
MIN MAX MIN MAX
M 0° 7° 0° 7°
- 10 -
Add: A2 Building Ming Jin hai Industrial Park,Zhou shi Rd ,Shiyan,Baoan,Shenzhen,China. 518108
1 / 15
Tel: 0086-755-85257292 Web: www.ipixelleds.com Fax:0086-755-85257292 E-mail: inquiry@ipixelleds.com