Beruflich Dokumente
Kultur Dokumente
ADC SERIES
Analog to Digital Converters
DC Current Sensors To Inverter Use any 4–20 mA, 0–5 VDC or 0–10 VDC output sensor as
an input to the NK Technologies’ ADC analog-to-Modbus
converter: Current, voltage, temperature, or any parameter
that the application calls for. With the digital Modbus output
scaled for zero to 100 percent the signal will represent
- +
whatever you may need to measure.
Analog to Modbus
1 2
GND 120VAC
3
(Optional 240VAC)
8 Channels
Modbus Communication
POWER MODBUS RTU MODBUS RTU
ADDRESS SW. OUTPUT
C US
Side View
Power Supply • 120 VAC (108–132 V)
• 240 VAC (216–264 V)
5.0″ • 24 VDC (22–26 V)
127.0mm
Power Consumption • 120 VAC: <50 mA
2.9″
73.0mm • 240 VAC: <25 mA
• 24 VDC: <200 mA
Output Modbus RTU Slave 8 Channels (RS485)
Output Protocol 1 start bit, 8 data bits (LSB first), 1 bit for even
parity, 1 stop bit
Output Functions Function 04, “Read Input Registers”
Output Range 0–120% (4 mA = 0, 20 mA = 100%)
End View Input Range • 4–20 mA (power from converter or external)
• 0–5 VDC (externally powered)
3.7″ • 0–10 VDC (externally powered)
94.0mm
Accuracy 1.0% FS
Indication Green Power On LED, yellow Busy LED,
2.5″ red Fault LED
64.0mm
Addressing 8 wide binary switch (1 to 247)
Environmental -4 to 122°F (-20 to 50°C)
0–95% RH, non-condensing
Listings UL/cUL
Signal Converters
Sensor Sensor
(1) (2) (3) (4) (5)
ADC – – – M O D – D I N
+ - - + + -
(1) Input channels
4-20 MA INPUT CHANNELS 1-8
1 Eight 4–20 mA loop-powered input channels
COMMON
COMMON
RoHS
COMPLIANT 2 3511 Charter Park Drive • San Jose, CA 95136
2011/ 65/ E
800.959.4014 • www.nktechnologies.com • sales@nktechnologies.com 129